Specifications R & RX Lanco
|
|
|
- Marylou Pitts
- 5 years ago
- Views:
Transcription
1 Lanco die heads are revolving tools designed for hand-operated, semi-automatic, and automatic threading machines Wide range coverage for threading diameters 1/4 to 9-1/4 (6 to 235 mm) Heads available for standard, heavy-duty and large diameter applications and will thread up to and including Class 3 tolerances R Lanco Heads are for producing straight threads and jam cutting shorter length taper threads like NPT and BSTP Seven sizes to thread from 1/4 to 6, 6 to 152 mm, 1/8 to 6 nominal pipe. Oversize capacities available RX Lanco Heads are used to generate straight threads of relatively fine pitch and short length on large diameters Incorporates six chasers with a range of 1-7/8 to 9-1/4 maximum oversize range Dimensions 3/4 R 1 R 1-1/2 R 2-1/2 R Dimensions Inches mm Inches mm Inches mm Inches mm A 5-1/ / / / B* 6-1/ / / / C* 6-3/ / / / D 7/ / / / E F / / /8 9.5 G 3-3/ / / / H 5/16 U.N.C. 7/16 U.N.C 9/16 U.N.C. 5/8 U.N.C. J 7/ / / / L 4-17/ M 5/ / / P4-9/ / / / R 29/ / / / Specifications 3/4 R 1 R 1-1/2 R 2-1/2 R Range Inches 1/4 to 3/4 1/4 to 1 3/8 to 1-1/2 1/2 to 2-1/2 Range mm 6 to 20 6 to 24 9 to to 64 Range Pipe Sizes 1/8 to 3/4 1/8 to 1 1/8 to 1-1/2 1/4 to 2-1/2 Coarsest Pitch-Thds. per in.* Coarsest Pitch mm* Weight Lbs. 24-1/ /2 172 Weight Kgms *Coarser pitch threads can be produced dependent on thread form, material, etc. Write for details enclosing print of workpiece. * B and C Dimensions are based upon the use of standard, maximum range U.N.C. Chaser Holders. For correct dimension when using oversize or any other holder set, please contact Landis Engineering Department.
2 3/4" LANCO Standard Chaser Holders 1/4 to 3/4 UNC 3-1/4 15/16 x 2-1/8 LSB060420A L0C LNS0B060421A L0C /16 to 1-1/4 UNC 2-1/2 15/16 x 2-1/8 LSB060422A L0C LNS0B060423A L0C /4 to 7/16 UNF 2-1/2 15/16 x 2-1/8 LNS0B060424B L0C LNS0BO60425B L0C /2 to 3/4 UNF 1-3/4 15/16 x 2-1/8 LSB060426B L0C LNS0B060427B L0C /8 to 1-1/4 UNF 1-1/2 15/16 x 2-1/8 LSB060428B L0C LNS0BO60429B L0C /4 to 3/4 WHIT 3-1/4 15/16 x 2-1/8 LNS0B060420C L0C LNS0B060421C L0C /16 to 1-1/4 WHIT 2-1/2 15/16 x 2-1/8 LNS0B060422C L0C LNS0B060423C L0C /4 to 3/4 BSF 2-1/2 15/16 x 2-1/8 LNS0B060424D L0C LNS0B060425D L0C /16 to 1-1/4 BSF 2 15/16 x 2-1/8 LNS0B060430D L0C LNS0B060431D L0C to 18 mm METRIC COARSE 3-1/4 15/16 x 2-1/8 LNS0B060420E L0C LNS0B060421E LNS0C to 33 mm METRIC COARSE 2-1/2 15/16 x 2-1/8 LNS0B060422E L0C LNS0B060423E LNS0C to 18 mm METRIC FINE 2 15/16 x 2-1/8 LNS0B060435F L0C LNS0B060439F LNS0C to 33 mm METRIC FINE 1-1/2 15/16 x 2-1/8 LNS0B060428F L0C0O60181 LNS0B060429F LNS0C /8 to 3/8 TAPER PIPE 2 15/16 x 2-1/8 LSB60432G L0C LNS0B060433G LNS0C /8 to 1/2 TAPER PIPE 2 15/16 x 2-1/8 LNS0B060432G L0C /2 to 3/4 TAPER PIPE 1-1/4 15/16 x 2-1/8 LSB060434G L0C LNS0B060438G LNS0C /8 to 3/8 STR. PIPE 2 15/16 x 2-1/8 LNS0B060435H L0C LNS0B060439H LNS0C /2 to 3/4 STR. PIPE 1-1/4 15/16 x 2-1/8 LNS0B060436H L0C LNS0B060437H LNS0C " 8R LANCO Standard Chaser Holders 1/4 to 1 UNC 3 1-3/64 x 3 LSB060440A L0C LNS0B060441A L0C /4 to 1/2 UNF 2-1/2 1-3/64 x 3 LNS0B060442B L0C LNS0B060443B L0C /16 to 1 UNF 1-3/4 1-3/64 x 3 LNS0B060444B L0C LNS0B060445B L0C /4 to 1 WHIT 3 1-3/64 x 3 LNS0B060440C L0C LNS0B060441C L0C /4 to 1/2 BSF 2-3/4 1-3/64 x 3 LNS0B060446D L0C LNS0B060447D L0C /16 to 1 BSF 2-1/4 1-3/64 x 3 LNS0B060448D L0C LNS0B060449D L0C to 27 mm METRIC COARSE 3 1-3/64 x 3 LNS0B060440E L0C LNS0B060441E LNS0C to 27 mm METRIC FINE 1-3/4 1-3/64 x 3 LNS0B060444F L0C LNS0B060445F LNS0C /8 to 3/4 TAPER PIPE 1-3/4 1-3/64 x 3 LNS0B060450G L0C LNS0B060451G LNS0C TAPER PIPE 1 1-1/4 x 2-3/4 LNS014884G L0C LNS019844G LNS0C /8 to 3/4 STR. PIPE 1-3/4 1-3/64 x 3 LNS0B060444H LNS0C LNS0B060445H LNS0C STR. PIPE 1 1-3/64 x 3 LNS0B094331H LNS0C109608
3 2-1/2" 20R LANCO Standard Chaser Holders 1/2 to 1-1/2 UNC 2-1/2 1-3/64 or 1-7/64 x 4 LSB060469A L0C LNS0B060470A L0C /8 to 2-1/2 UNC 2 1-1/2 x 5 LSB060532A L0C LNS0B060533A L0C /2 UNF 2 1-3/64 x 4 LNS0B060471B L0C LNS0B060472B L0C /16 to 1 UNF 1-3/4 1-3/64 x 4 LNS0B060473B L0C LNS0B060474B L0C /8 to 1-1/2 UNF 1-1/4 1-3/64 x 4 LNS0B060475B L0C LNS0B060476B L0C /2 to 1-1/2 WHIT 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B060469C L0C LNS0B060470C L0C /8 to 2-1/2 WHIT 2 1-1/2 x 5 LNS0B060532C L0C LNS0BO60533C L0C /2 to 7/8 BSF 2-1/4 1-3/64 x 4 LNS0B060477D L0C LNS0B060478D L0C to 1-1/2 BSF 1-3/4 1-3/64 x 4 LNS0B060473D L0C LNS0B060474D L0C /8 x 2-1/2 BSF 1-1/2 1-3/64 or 1-7/64 x 4 LNS0B060479D L0C LNS0B060480D L0C to 39 mm METRIC COARSE 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B060469E L0C LNS0B060470E LNS0C to 64 mm METRIC COARSE 2 1-1/2 x 5 LNS0B060532E L0C LNS0B060533E LNS0C to 16 mm METRIC FINE 2-1/4 1-3/64 x 4 LNS0B060477F L0C LNS0B060478F LNS0C to 39 mm METRIC FINE 1-1/4 1-3/64 x 4 LNLS0B060475F L0C LNS0B060476F LNS0C to 64 mm METRIC FINE 1-1/4 1-3/64 or 1-7/64 x 4 LNS0B060544F L0C LNS0B060545F LNS0C /2" 12R LANCO Standard Chaser Holders 3/8 to 1-1/2 UNC 2-3/4 1-3/64 or 1-7/16 x 4 LSB060452A L0C LNS0B060453A L0C /8 to 1/2 UNF 2-1/4 1-3/64 x 4 LNS0B060454B L0C LNS0B060455B L0C /16 to 1 UNF 1-3/4 1-3/64 x 4 LSB060456B L0C LNS0B060457B L0C /8 to 1-1/2 UNF 1-1/4 1-3/64 x 4 LNS0B060458B L0C LNS0B060459B L0C /8 to 1-1/2 WHIT 2-3/4 1-3/64 or 1-7/64 x 4 LNS0B060452C L0C LNS0B060453C L0C /4 to 3/4 TAPER PIPE 1-3/4 1-3/64 x 4 LSB060481G L0C LNS0B060482G LNS0C /2 to 3/4 TAPER PIPE 1-3/4 1-3/64 x 4 LNS0B060481G L0C to 2 TAPER PIPE 1 1-1/4 x 5 LSB060483G L0C LNS0B060484G LNS0C /2 TAPER PIPE 3/4 1-1/2 x 5 LNS019268G L0C /2 to 3 TAPER PIPE 3/4º 1-1/2 x 5 LNS019268G2 L0C /4 to 3/4 STR. PIPE 1-3/4 1-3/64 x 4 LNS0B060473H L0C LNS0B060474H LNS0C to 2 STR. PIPE 1 1-3/64 x 4 LNS0B096389H L0C LNS0B095693H LNS0C /2 to 3 STR. PIPE 3/4 1-3/64 x 4 LNS0B095030H L0D /8 to 7/8 BSF 2-1/2 1-3/64 x 4 LNS0B060460D L0C LNS0B060461D L0C to 1-1/2 BSF 1-3/4 1-3/64 x 4 LNS0B060456D L0C LNS0B060457D L0C to 39 mm METRIC COARSE 2-3/4 1-3/64 or 1-7/64 x 4 LNS0B060452E L0C LNS0B060453E L0C to 14 mm METRIC FINE 1-3/4 1-3/64 x 4 LNS0B060456F L0C LNS0B060457F L0C to 39 mm METRIC FINE 1-1/4 1-3/64 x 4 LNS0B060458F L0C LNS0B060459F L0C /8 to 3/4 TAPER PIPE 1-3/4 1-3/64 x 4 LSB060462G L0C LNS0B060463G LNS0C /2 to 3/4 TAPER PIPE 1-3/4 1-3/64 x 4 LNS0B060462G L0C to 1-1/2 TAPER PIPE 1 1-1/4 x 4 LSB060465G L0C LNS0B060466G LNS0C to 2 TAPER PIPE 1 1-1/4 x 4 LNS0B060465G2 L0C /8 to 3/4 STR. PIPE 1-3/4 1-3/64 x 4 LNS0B060456H L0C LNS0B060457H LNS0C to 1-1/2 STR. PIPE 1 1-3/64 x 4 LNS0B094821H L0C LNS0B096662H LNS0C to 2 STR. PIPE 1 1-3/64 x 4 LNS0B094821H2 L0C060349
4 R & RX Lanco Specifications 4" R 6" R Range Inches 1 to 4 2-1/2 to 6 Range mm 24 to to 153 Range Pipe Sizes 1 to 4 2-1/2 to 6 Coarsest Pitch-Thds. per in.* 3 3 Coarsest Pitch mm* Weight Lbs /4 505 Weight Kgms * Coarser pitch threads can be produced dependent on thread form, material, etc. Write for details enclosing print of workpiece. 4" 32R LANCO Standard Chaser Holders 1 to 1-1/2 UNC 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B042378A L0C LNS0B048614A LNS0C /8 to 2-1/2 UNC 2 1-1/2 x 5 LNS0B042381A L0C LNS0B047679A L0C /8 to 4 UNC 1-1/2 1-1/2 x 5 LNS0B042382A L0C LNS0B047680A L0C /2 UNF 2 1-3/64 x 4 LNS0B052352B L0C LNS0B052355B LNS0C /16 to 1 UNF 1-3/4 1-3/64 x 4 LNS0B052353B L0C LNS0B052356B LNS0C /8 to 1-1/2 UNF 1-1/4 1-3/64 x 4 LNS0B052354B L0C LNS0B052357B LNS0C to 1-1/2 WHIT 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B042378C L0C LNS0B048614C LNS0C /8 to 3-1/2 WHIT 2 1-1/2 x 5 LNS0B042381C L0C LNS0B047679C L0C /4 to 4 WHIT 1-3/4 2-1/4 x 5 LNS0B123020C LNS0C LNS0B060700C LNS0C to 1-1/2 BSF 1-3/4 1-3/64 x 4 LNS0B052353D L0C LNS0B052356D LNS0C /8 to 2-3/4 BSF 1-1/2 1-3/64 or 1-7/64 x 4 LNS0B106566D LNS0C LNS0B096022D LNS0C to 4 BSF 1-1/4 1-1/2 x 5 LNS0B095788D L0C LNS0B096002D L0C to 39 mm METRIC COARSE 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B042378E LNS0C LNS0B048614E LNS0C to 64 mm METRIC COARSE 2 1-1/2 x 5 LNS0B042381E LNS0C LNS0B047679E LNS0C to 100 mm METRIC COARSE 1-1/2 1-1/2 x 5 LNS0B042382E LNS0C LNS0B047680E LNS0C /2 to 3/4 TAPER PIPE 1-1/2 1-3/64 x 4 LNS0B111969G LNS0E to 2 TAPER PIPE 1 1-1/4 x 4 LNS0B042380G L0C /2 to 4 TAPER PIPE 2/3 2-1/4 x 5 LNS0B042383G L0C /2 to 3/4 STR. PIPE 1-1/2 1-3/64 x 4 LNS0B106566H LNS0C LNS0B096022H 1 to 2 STR. PIPE 1 1-3/64 x 4 LNS0B052221H LNS0C LNS0B105886H LNS0C /2 to 4 STR. PIPE NPSM 3/4 3/4 1-3/64 x 4 LNS0B052222H L0C LNS0B096058H 2-1/2 to 4 STR. PIPE BSPP 1/2 1-3/64 x 4 LNS0B042379H L0C LNS0B052837H Dimensions 4" R 6" R Dimensions Inches mm Inches mm A 15-1/ / B* 18-5/ / C* 12-15/ / D 4-13/ E F 3/ / G 9-3/ / H 5/8 U.NC /8 U.N.C J 15/ / L 9-19/ / M 1-1/ / P12-7/ / R 2-19/ / * B and C Dimensions are based upon the use of standard, maximum range U.N.C. Chaser Holders. For correct dimension when using oversize or any other holder set, please contact Landis Engineering Department. 6" 48R LANCO Standard Chaser Holders Six Chasers Per Set 2-1/2 to 2-3/4 UNC 1-3/4 1-1/2 x 5 LNS0B042006A LNS0C LNS0B050301A LNS0C /8 to 4 UNC 1-1/2 1-1/2 x 5 LNS0B039793A LNS0C LNS0B040931A LNS0C /2 to 3-1/2 WHIT 2 1-1/2 x 5 LNS0B052500C LNS0C LNS0B054066C LNS0C /4 to 4 WHIT 1-3/4 2-1/4 x 5 LNS0B044049C LNS0C LNS0B054005C LNS0C to 104 mm METRIC COARSE 1-1/2 1-1/2 x 5 LNS0B039793E LNS0C LNS0B040931E LNS0C to 133 mm METRIC COARSE 1 1-1/2 x 5 LNS0B039791E LNS0C LNS0B040932E LNS0C to 168 mm METRIC COARSE 3/4 1-1/2 x 5 LNS0B039792E LNS0C LNS0B053753E LNS0C /2 to 3 TAPER PIPE 3/4 2-1/4 x 5 LNS0B039484G L0C /2 to 4 TAPER PIPE 1/2 2-1/4 x 5 LNS0B039482G L0C /2 to 6 TAPER PIPE 1/2 2-1/4 x 5 LNS0B039481G L0C /2 to 3 STR. PIPE 3/4 1-3/64 x 4 LNS0B052498H LNS0C /2 to 4 STR. PIPE 1/2 1-3/64 x 4 LNS0B052496H LNS0C /2 to 6 STR. PIPE 1/2 1-3/64 x 4 LNS0B052497H LNS0C052293
5 40 RX LANCO Specifications Weight Lbs. 133 Weight Kgms RX LANCO Chaser Holders Range Coarsest Pitch Thrds. Per In. (mm) Maximum Thread Length Inch (mm) Chaser Size Inch (mm) 1-7/8 to 2-1/2 (47 to 64 mm) 15/16 x 2-1/8 8 (3 mm) 7-1/2 (190.5 mm) 2-1/2 to 3-1/2 (64 to 89 mm) 15/16 x 2-1/8 8 (3 mm) 7-1/2 (190.5 mm) 3-9/16 to 4-1/2 (90 to 114 mm) 15/16 x 2-1/8 8 (3 mm) 7-1/2 (190.5 mm) 4-9/16 to 5-1/2*** (116 to 128 mm) 15/16 x 2-1/8 8 (3 mm) 7-7/8 (200 mm) 5 to 6 (128 to 152 mm) 15/16 x 2-1/8 or 1-1/4 x 2-3/4 8 (3 mm) 2-1/8 to 4-1/2* (54 to 114 mm*) 6 to 7** (153 to 178 mm**) 15/16 x 2-1/8 8 (3 mm) 1 to 4-1/2* (25.4 or 114 mm*) 7-1/8 to 7-3/4** (181 to 197 mm**) 15/16 x 2-1/8 8 (3 mm) 1-3/8 to 3* (35 to 76 mm*) 7-5/8 to 8-1/4** (194 to 209 mm**) 15/16 x 2-1/8 8 (3 mm) 1-3/8 to 3-1/4* (38 or 83 mm*) 8-1/8 to 8-5/8** (206 to 219 mm**) 15/16 x 2-1/8 8 (3 mm) 1-1/2 to 3-1/16* (38 to 78 mm*) 8-3/4 to 9-1/4** (222 to 235 mm**) 15/16 x 2-1/8 8 (3 mm) 1-3/8 to 2-5/8* (35 or 67 mm*) 13/16 to 9/16 (11 to 14 mm ) 1-1/2 x 4 6 (4 mm) 5/8 to 2-1/4 (16 to 179 mm ) 1-1/2 x 4 5 (5 mm) * Requires special built-up chaser holders. ** Recommended for non-ferrous materials only. *** 5-1/2" diameter limited to 1-3/8" maximum thread length. Note 40 RX chaser holders are furnished against order to thread specific diameter and pitch combinations within these limitations. Often, more than one diameter and pitch combination can be threaded with a particular set of holders depending upon the helix angles involved. Please refer complete information on diameter and pitch combinations for engineering review. Special holders for pipe wrench jaw threading. 40 RX LANCO Dimensions Dimensions Inches mm A B C** 9-11/ D-Standard* 3-1/ E F 7/ G 7-1/ H 5/8 U.NC. L 7-7/ ** C Dimension based upon the use of standard, maximum range Chaser Holders. For correct dimension when using oversize or any other, please contact Landis Engineering Department. * Maximum bore - 5-1/8" B Dimension depends on application of Chaser Holders, For exact dimension, specify holders used and contact the Landis Engineering Department. R LANCO Oversize Chaser Holders Range Coarsest Pitch Maximum Thread Length Inch (mm) Chaser Size Thrds. Per In. (mm) Inch (mm) 3/4 6R 13/16 to 1-1/4 (20 to 33 mm) 15/16 x 2-1/8 10 (2.5 mm) 1-3/8 (33 mm) 1-5/16 to 2 (33 to 52 mm) 15/16 x 2-1/8 12 (2.0 mm) 1-3/16 to 2-7/8* - (30 to 73 mm*) 2-1/8 to 2-3/4 (52 to 72 mm) 15/16 x 2-1/8 12 (2.0 mm) 1-3/16 to 2-5/8* - (30 to 67 mm*) 1" 8R 1-1/8 to 2-1/8 (28 to 54 mm) 1-3/64 x 3 8 (3 mm) 1-7/16 to 2-3/16* - (36 to 55 mm*) 2-1/4 to 3 (58 to 76 mm) 1-3/64 x 3 8 (3 mm) 2-3/8* - (60 mm*) 1-1/2" 12R 1-5/8 to 2-5/8 (42 to 68 mm) 1-3/64 x 4 7 (3.5 mm) 1-5/8 to 4-1/8* - (41 to 104 mm*) 2-3/4 to 3-3/4 (72 to 96 mm) 1-3/64 x 4 7 (3.5 mm) 1-1/2 to 2-5/16 (38 to 59 mm*) 2-1/2" 20R 2-1/8 to 3-1/8 (56 to 80 mm) 1-3/64 x 4 7 (3.5 mm) 1-7/8 or 3-1/4* - (47 or 82 mm*) 3-1/4 to 4-1/4 (82 to 108 mm) 1-3/64 x 4 7 (3.5 mm) 2 or 2-3/4* - (51 or 70 mm*) 4" 32R* 6" 48R* * Requires special built-up chaser holders. ** Contact Landis Engineering Department for information. Note Oversize chaser holders are furnished against order to thread specific diameter and pitch combinations. Often more than one diameter and pitch combination can be threaded with a particular set of oversize chaser holders depending upon the helix angles involved. Also, the thread must be within the coarsest pitch and maximum thread length limitations of the chaser holders. Please refer complete information on diameter and pitch combinations for engineering review.
Specifications F & A Landmatics
For applications where the part rotates and the threading tool is stationary For straight threading, large diameter, and tapered thread applications from #4 to 6-1/2 maximum oversize (3 to 165 mm) Self-opening,
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
Lubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
Lubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
LEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
Gauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
VTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
Threading 4.1. Pipe Capacity (in.) No. of Models. Type
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
Geared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
EB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
Pistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
EB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
PROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
SPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Great Plains. Parts Manual. Manufacturing, Inc. Simba ST-Bar.
Manual Simba ST-Bar Great Plains Manufacturing, Inc. www.greatplainsmfg.com Read the operators manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
Type TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
4.1. No. of Models. Pipe Capacity (in.)
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
Our History Index 1/4" -28 Tapered Thread Fittings 1/4" NPT Fittings
R FITTINGS GREASE GREASE FITTINGS & TRADING CO., INC. 63 AUSTIN BLVD COMMACK NY 11725 TEL: (631)543-4490 FAX (631)543-4496 TOLL FREE: 1-800-669-3962 www.dynatronindustries.com Our History When A&M Trading
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
COMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
Parallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
Power TOOLS. Power Threading Machine / Model 535. Power Threading / Model Model 300 Compact Threading Machine
Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor.
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
MINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
SPECIFICATIONS. General Specifications. Dimensions
General s Engine RPM Setting Spark Plug TX 420 22306 Ser #200000100-200000999 / CH20S-64637 Ser #210000100-240000999 / CH20S-64656 Ser #250000100-270000999 / CH20S-64725 Ser #280000100-280000999 / CH20S-64762
Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
TOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
GRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
THREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
ADVANCED. Grips & Attachments.
www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and
» SCREW-HOLE PUNCHES
» SCREW-HOLE PUNCHES Screw-hole Cuts holes in thin materials quickly, easily, cleanly and without burrs in a few simple operations. Three-point cut gives improved contact and thus less deformation of the
igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective
igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The
(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
370/230/UNF 370/330/UNF 370/460/UNF 370/36/UNF 2 370/23/UNF 2 370/16/UNF 2 380/230/UNF 2 380/330/UNF 2 380/460/UNF 2 380/36/UNF 2 380/23/UNF 2
Angle Wheels Buffout Wheels Continued 370/230/UNF 3 8 ⅜ UNF. 24 tpi 230 6 Angle Wheel 8 Angle Wheel 370/330/UNF 370/460/UNF 3 8 ⅜ UNF. 24 tpi 330 3 8 ⅜ UNF. 24 tpi 460 110/230/60 6 60mm 230 110/330/60
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
For All Your Air Starting Needs
For All Your Air Starting Needs Air Starters Repair Kits Relay Valves Lubricators Filters Mufflers Pilot Valves Soloniod Valves Performance Reliability Quality MARADYNE CORPORATION 4540 West 160th. Street
POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
Slide-Rite & Slide-Rite CR Gearbox
Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES
Multimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
STAINLESS STEEL PARTS - GENERAL STOCK LIST
STAINLESS STEEL PARTS - GENERAL STOCK LIST MOLNAR PRECISION LTD. PO BOX 1208, PRESTON, LANCASHIRE, PR2 0HG, ENGLAND PHONE 01772 700700 FAX 01772 705075 Web Site: www.manx.co.uk Email: sales@manx.co.uk
DRIVE COUPLINGS DRIVE COUPLINGS
DRIVE COUPLINGS Fenner shaft couplings range from highly resilient to totally rigid and are all precision manufactured using high quality ferrous materials and the latest polymer technology. Fenaflex tyre
SERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Induction Coil Design and Theory. United Induction Heating Machine Limited.
Induction Coil Design and Theory United Induction Heating Machine Limited United Machine Limited http://www.uihm.com/ 2 Basic Points to consider: Success is directly dependant on proper design of the Inductors
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical
UPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
POWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel
Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel ENGLISH Mineral insulated Type T Thermocouple 316 stainless steel Highly flexible,
BELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
Cal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for
FULL COLOR TAB #12 BTP
FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage