Specifications F & A Landmatics
|
|
|
- Tracy Ryan
- 5 years ago
- Views:
Transcription
1 For applications where the part rotates and the threading tool is stationary For straight threading, large diameter, and tapered thread applications from #4 to 6-1/2 maximum oversize (3 to 165 mm) Self-opening, manually, or cam closed operations available Generally applied to turret lathes, automatics, hand screw, and similar machines Manually closed, but can be optionally equipped with an overtravel feature allowing use with machines having a cam or automatic closing device Specifications 5/8 5F 7/8 7F 1-1/4 10F 2 16F 3 24A 4 32A Range Inches #4 to 5/8 #4 to 7/8 1/4 to 1-1/4 3/8 to 2 3/4 to 3 1 to 4 Range mm 3 to 16 3 to 22 6 to 33** 9 to 52** 18 to to 100 Range Pipe Sizes 1/8 and 1/4 1/8 to 1/2 1/8 to 3/4 1/4 to 2 1/2 to 3 1 to 4 Coarsest Pitch-Thds. per in.* /2 4 4 Coarsest Pitch mm* Maximum Thread Length In. (With Solid Shank) 2-3/4 3-3/8 4-1/2 5-1/8 6-13/ /32 Maximum Thread Length mm (With Solid Shank) Weight Lbs. 4-3/4 10-1/2 23-1/2 51-1/ Weight Kgms *Coarser pitch threads can be produced dependent on thread form, materials, etc. Write for details enclosing print of workpiece. **On the 1-1/4 and 2 F Heads, there is approximately 1/64 clearance between the I.D. of the bore and the largest Metric size O.D. listed. Dimensions 5/8 5F 7/8 7F 1-1/4 10F 2 16F 3 24A 4 32A Dimensions Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm A 2-15/ / / / / / B* 3-11/ / / / / / C Std. Hollow / / / / / C Std. Solid 5/ / / C Min. Hollow 7/ / / / / / C Min. Solid 1/ / / / / D / / / E 21/ / / / / /16** 77.8** F 2-3/ / / / / / Special shanks furnished upon order. **The bore of the 4 LANDMATIC Head is 4-13/16 (122.2 mm) which allows a maximum workpiece O.D. of 4-3/4 (120.6 mm) to be threaded 7-3/4 (196.8 mm) in length. Longer length workpieces can be threaded if their O.D. is within the 3-1/6 I.D. (77.8 mm) of the hollow shank. * B Dimension based upon the use of standard, maximum range U.N.C. Chaser Holders. For correct dimension when using oversize or other holders, please contact Landis Engineering Department.
2 5/8" 5F LANDMATIC Standard Chaser Holders No. 4 to No. 12 UNC 4-1/4 5/8 x 1-1/8 LNS0B051962A L0D LNS0B051963A LNS0D /16 to 5/8 UNC 3-1/2 5/8 x 1-1/8 LSB060069A L0C LNS0B060070A L0C No. 4 to No. 12 UNF 3-1/2 5/8 x 1-1/8 LNS0B060069B L0D LNS0B060070B LNS0D /4 to 5/8 UNF 2-1/3 5/8 x 1-1/8 LSB060071B L0C LNS0B060072B L0C to 7/32 WHIT 4-1/4 5/8 x 1-1/8 LNS0B051962C L0D LNS0B051963C LNS0D /16 to 5/8 WHIT 3-1/2 5/8 x 1-1/8 LNS0B060069C L0C LNS0B060070C L0C /4 to 5/8 BSF 2-3/4 5/8 x 1-1/8 LNS0B060073D L0C LNS0B060074D LNS0C to 16 mm METRIC COARSE 3-1/2 5/8 x 1-1/8 LNS0B060069E L0C LNS0B060070E LNS0C to 16 mm METRIC FINE 2 5/8 x 1-1/8 LNS0B060075F L0C LNSB060154F LNS0C /8 to 1/4 PIPE 2 5/8 x 1-1/8 LNS0B060075I L0C LNS0B060154I LNS0C /8" 7F LANDMATIC Standard Chaser Holders No. 4 to No. 12 UNC 4-1/4 3/4 x 1-5/8 LNS0B090842A L0D LNS0B090915A L0D /4 to 7/8 UNC 3-1/4 3/4 x 1-5/8 LSB060124A L0D LNS0B060125A L0D No. 4 to No. 12 UNF 3-1/2 3/4 x 1-5/8 LNS0B090839B L0D LNS0B090912B L0D /4 to 7/8 UNF 2-1/4 3/4 x 1-5/8 LSB060126B L0D LNS0B060127B L0D /8 to 7/32 WHIT 4-1/4 3/4 x 1-5/8 LNS0B090842C L0D LNS0B090915C L0D /4 to 7/8 WHIT 3-1/4 3/4 x 1-5/8 LNS0B060124C L0D LNS0B060125C L0D /4 to 7/8 BSF 2-1/2 3/4 x 1-5/8 LNS0B060128D L0D LNS0B060129D L0D to 22 mm METRIC COARSE 3-1/4 3/4 x 1-5/8 LNS0B060124E L0D LNS0B060125E LNS0D to 22 mm METRIC FINE 1-3/4 3/4 x 1-5/8 LNS0B060130F L0D LNS0B060131F LNS0D /8 to 1/2 PIPE 1-3/4 3/4 x 1-5/8 LSB060130I L0D LNS0BO60131I LNS0D060123
3 2" 16F LANDMATIC Standard Chaser Holders 3/8 to 1-1/4 UNC 2-3/4 15/16 x 2-1/8 LSX015534A L LNS105984A L /4 to 1-1/4* UNC 2-3/4 15/16 x 2-1/8 LNS015534A* L /8 to 2 UNC 2-1/4 1-1/4 x 2-3/4 LSX015905A L LNS015970A LNS /2 to 5/8 UNF 2 15/16 x 2-1/8 LNS016903B L LNS019141B L /4 to 1-1/4 UNF 1-1/2 15/16 x 2-1/8 LSX016904B L LNS019226B L /8 to 1-1/2 UNF 1-1/4 15/16 x 2-1/8 LSX016905B L LNS019707B LNS /8 to 1-1/4 WHIT 2-3/4 15/16 x 2-1/8 LNS015534C L LNS015984C L /8 to 2 WHIT 2-1/4 1-1/4 x 2-3/4 LNS015905C L LNS015970C L /2 to 5/8 BSF 2-1/4 15/16 x 2-1/8 LNS017077D L LNS017078D L /4 to 1-1/4 BSF 2 15/16 x 2-1/8 LNS016903D L LNS019141D L /8 to 2 BSF 1-3/4 15/16 x 2-1/8 LNS019250D L LNS050704D LNS to 33 mm METRIC COARSE 2-3/4 15/16 x 2-1/8 LNS015534E L LNS015984E LNS to 52 mm METRIC COARSE 2-1/4 1-1/4 x 2-3/4 LNS015905E L0D LNS015970E LNS to 14 mm METRIC FINE 2 15/16 x 2-1/8 LNS016903F L LNS019141F LNS to 33 mm METRIC FINE 1-1/2 15/16 x 2-1/8 LNS016904F L LNS019226F LNS to 52 mm METRIC FINE 3/4 15/16 x 2-1/8 LNS015535F LNS LNS015474F LNS0C /4" 10F LANDMATIC Standard Chaser Holders 1/4 to 3/4 UNC 3-1/4 15/16 x 2-1/8 LSB060420A L0C LNS0B060421A L0C /16 to 1-1/4 UNC 2-1/2 15/16 x 2-1/8 LSB060422A L0C LNS0B060423A L0C /4 to 7/16 UNF 2-1/2 15/16 x 2-1/8 LNS0B060424B L0C LNS0B060425B L0C /2 to 3/4 UNF 1-3/4 15/16 x 2-1/8 LSB060426B L0C LNS0B060427B L0C /8 to 1-1/4 UNF 1-1/2 15/16 x 2-1/8 LSB60428B L0CO60179 LNS0B060429B L0C /4 to 3/4 WHIT 3-1/4 15/16 x 2-1/8 LNS0B060420C L0C LNS0B060421C L0C /16 to 1-1/4 WHIT 2-1/2 15/16 x 2-1/8 LNS0B060422C L0C LNS0B060423C L0C /8 to 3/4 TAPER PIPE 1-3/4 15/16 x 2-1/8 LNS015579G1 L /2 to 3/4 TAPER PIPE 1-3/4 15/16 x 2-1/8 LNS015579G L /4 to 3/4 TAPER PIPE 1-3/4 15/16 x 2-1/8 LSX015579G L LNS019728G LNS to 2 TAPER PIPE 1 1-1/4 x 2-3/4 LSX015580G L LNS019102G LNS /8 to 3/4 STR. PIPE 1-3/4 15/16 x 2-1/8 LNS019737H1 L0D /2 to 3/4 STR. PIPE 1-3/4 15/16 x 2-1/8 LNS019737H2 L0D /4 to 3/4 STR. PIPE 1-3/4 15/16 x 2-1/8 LNS019737H L0D LNS019760H LNS0D to 2 STR. PIPE 1 15/16 x 2-1/8 LSB091657H L0D LNS0C091826H LNS0D *For 16 JNB Die Head 1/4 to 3/4 BSF 2-1/2 15/16 x 2-1/8 LNS0B060424D L0C LNS0B060425D L0C /16 to 1-1/4 BSF 2 15/16 x 2-1/8 LNS0B060430D L0C LNS0B060431D L0C to 18 mm METRIC COARSE 3-1/4 15/16 x 2-1/8 LNS0B060420E L0C LNS0B060421E LNS0C to 33 mm METRIC COARSE 2-1/2 15/16 x 2-1/8 LNS0B060422E L0C LNS0B060423E LNS0C to 18 mm METRIC FINE 2 15/16 x 2-1/8 LNS0B060435F L0C LNS0B060439F LNS0C to 33 mm METRIC FINE 1-1/2 15/16 x 2-1/8 LNS0B060428F L0C LNS0B060429F LNS0C /8 to 3/8 TAPER PIPE 2 15/16 x 2-1/8 LSB060432G L0C LNS0B060433G LNS0C /8 to 1/2 TAPER PIPE 2 15/16 x 2-1/8 LNS0B060432G1 L0C /2 to 3/4 TAPER PIPE 1-1/4 15/16 x 2-1/8 LSB060434G L0C LNS0B060438G LNS0C /8 to 3/8 STR. PIPE 2 15/16 x 2-1/8 LNS0B060435H L0C LNS0B060439H LNS0C /2 to 3/4 STR. PIPE 1-1/4 15/16 x 2-1/8 LNS0B060436H L0C LNS0B060437H LNS0C060184
4 3" 24A LANDMATIC Standard Chaser Holders 3/4 to 1-1/2 UNC 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B049448A L0C LNS0B050707A LNS0C /8 to 3 UNC 2º 1-1/2 x 4 LNS0B055782A L0C LNS0B055914A LNS0C /4 to 1-1/4 UNF 1-1/2º 1-3/64 x 4 LNS0B053530B L0C LNS0B053534B LNS0C /8 to 1-1/2 UNF 1-1/4º 1-3/64 x 4 LNS0B053531B L0C LNS0B053535B LNS0C /4 to 1-1/2 WHIT 2-1/2º 1-3/64 or 1-7/64 x 4 LNS0B049448C L0C LNS0B050707C LNS0C /8 to 3 WHIT 2º 1-1/2 x 4 LNS0B055782C L0C LNS0B055914C LNS0C /4 to 1-1/2 BSF 1-3/4º 1-3/64 x 4 LNS0B053532D L0C /8 to 2-3/4 BSF 1-1/4º 1-3/64 or 1-7/64 x 4 LNS0B53533D L0C to 39 mm METRIC COARSE 2-1/2º 1-3/64 or 1-7/64 x 4 LNS0B049498E LNS0C LNS0B050707E LNS0C to 76 mm METRIC COARSE 2º 1-1/2 x 4 LNS0B055782E LNS0C LNS0B055914E LNS0C /2 to 3-1/4 TAPER PIPE 1-3/4º 1-3/64 x 4 LNS0B050705G LNS0C LNS0B050709G LNS0C to 2 TAPER PIPE 1º 1-1/4 x 4 LNS0B050706G LNS0C LNS0B050710G LNS0C /2 to 3 TAPER PIPE 3/4º 1-7/8 x 4 LNS0B049447G LNS0C LNS0B050711G LNS0C /2 to 3/4 STR Pipe 1-3/4º 1-3/64 x 4 LNS0B053532H LNS0C to 2 STR Pipe 1º 1-3/64 x 4 LNS0B054076H LNS0C /2 to 3 STR Pipe 3/4º 1-3/64 x 4 LNS0B054077H LNS0C " 32A LANDMATIC Standard Chaser Holders 1 to 1-1/2 UNC 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B049446A L0C LNS0B050802A LNS0C /8 to 3 UNC 2 1-1/2 x 4 LNS0B055780A L0C LNS0BO55915A LNS0C /4 to 4 UNC 1-1/4 1-1/2 x 4 LNS0B055781A L0C LNS0B055916A LNS0C to 1-1/2 UNF 1-1/4 1-3/64 x 4 LNS0B093197B L0C to 1-1/2 WHIT 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B049446C L0C LNS0B050802C LNS0C /8 to 3 WHIT 2 1-1/2 x 4 LNS0B055780C L0C LNS0B055915C LNS0C /4 to 4 WHIT 1-3/4 1-7/8 x 4 LNS0B050721C LNS0C LNS0B050804C LNS0C to 1-1/2 BSF 1-3/4 1-3/64 x 4 LNS0B093199D L0C /8 to 2-3/4 BSF 1-1/4 1-3/64 or 1-7/64 x 4 LNS0B050795D L0C to 4 BSF 1-1/4 1-1/2 x 4 LNS0B055781D L0C to 38 mm METRIC COARSE 2-1/2 1-3/64 or 1-7/64 x 4 LNS0B049446E LNS0C LNS0B050802E LNS0C to 76 mm METRIC COARSE 2 1-1/2 x 4 LNS0B055780E LNS0C LNS0B055915E LNS0C /2 TO 3/4 TAPER PIPE 1-3/4 1-3/64 X 4 LNS0B050789G LNS0C LNS0B050228G LNS0C TO 2 TAPER PIPE 1 1-1/4 X 4 LNS0B050790G LNS0C LNS0B050806G LNS0C /2 TO 4 TAPER PIPE 1/2 1-7/8 X 4 LNS0B050791G LNS0C LNS0B050807G LNS0C to 2 STR. PIPE 1 1-3/64 x 4 LNS0B052237H LNS0C /2 to 4 STR. PIPE 3/4 1-3/64 x 4 LNS0B052238H LNS0C052244
5 Oversize Chaser Holders Range Chaser Size Coarsest Pitch Thrds. Per In. (mm) Maximum Thread Length** Inch (mm) Inch (mm) 5/8" 5F 3/4 to 1 (18 to 24 mm) 5/8 x 1-1/8 14 (1.75 mm) 7/8 (22 mm) 1 to 1-1/4 (24 to 34 mm) 5/8 x 1-1/8 14 (1.75 mm) 1-5/16 (33 mm) 7/8" 7F 15/16 to1-1/2 (24 to 39 mm) 3/4 x 1-5/8 14 (1.75 mm) 1-1/8 (28 mm) 1-9/16 to 2 (42 to 52 mm) 3/4 x 1-5/8 14 (1.75 mm) 2* - (51 mm*) 1-1/4" 10F 1-5/16 to2 (33 to 52 mm) 15/16 x 2-1/8 12 (2 mm) 1-3/16 or 2-7/8* - (30 or 73 mm*) 2-1/8 to 2-3/4 (52 to 72 mm) 15/16 x 2-1/8 8 (3 mm) 1-3/16 or 2-5/8* - (30 or 67 mm*) 2" - 16F 2-1/8 to 3 (54 to 76 mm) 15/16 x 2-1/8 8 (3 mm) 1-5/16 or 2-1/8* (33 or 81 mm* ) 3-1/8 to 3-3/4 (80 to 96 m) 15/16 x 2-1/8 8 (3 mm) 1-5/16 or 2-3/16* (33 or 56 mm* ) 3" 24A 3-1/8 to 4-1/4 (78 to 108 mm) 1-3/64 or 1-7/64 x 4" 6 (4 mm) 1-1/2 or 3-1/16* - (38 or 78 mm*) 1-1/4 x 4 or 1-1/2 x 4 6 (4 mm) 4-3/8 to 5-1/2 (112 to 140 mm) 1-3/64 or 1-7/64 x 4 6 (4 mm) 1-7/8 (48 mm) 4" 32A 4-1/8 to 4-3/4* (104 to 121 mm) 1-3/64 or 1-7/64 x 4 6 (4 mm) 2-5/16 (59 mm) 5 to 6-1/2 (125 to 165 mm) 1-3/64 or 1-7/64 x 4 6 (4 mm) 1-7/8 or 4-1/4* - (48 or 108 mm*) or 1-1/4 x 4 6 (4 mm) *Requires Special Built-Up Holders. **Important Total thread length allowing 1/8 clearance. 2-3/16 (56 mm) on 2-1/8 to 2-3/4 diameters and 1-15/16 (49 mm) on 2-7/8 and 3 diameters. Note: Oversized chaser holders are furnished against order to thread specific diameter and pitch combinations. Often, more than one diameter and pitch combination can be threaded with a particular set of oversize chaser holders depending upon the helix angles involved. Also, the thread must be within the coarsest pitch and maximum thread length limitations of the chaser holders. Please refer complete information on diameter and pitch combinations for engineering review.
Specifications R & RX Lanco
Lanco die heads are revolving tools designed for hand-operated, semi-automatic, and automatic threading machines Wide range coverage for threading diameters 1/4 to 9-1/4 (6 to 235 mm) Heads available for
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
370/230/UNF 370/330/UNF 370/460/UNF 370/36/UNF 2 370/23/UNF 2 370/16/UNF 2 380/230/UNF 2 380/330/UNF 2 380/460/UNF 2 380/36/UNF 2 380/23/UNF 2
Angle Wheels Buffout Wheels Continued 370/230/UNF 3 8 ⅜ UNF. 24 tpi 230 6 Angle Wheel 8 Angle Wheel 370/330/UNF 370/460/UNF 3 8 ⅜ UNF. 24 tpi 330 3 8 ⅜ UNF. 24 tpi 460 110/230/60 6 60mm 230 110/330/60
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
FP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
Lubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
SPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
THREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for
ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
Gauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
EB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
Disc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
HY-PRO AERO-F Inch & Metric Plug (4P-5P)
HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
Pneumatic & hydraulic drive options available. Chucking system can be removed to allow the flange facer to be facemounted.
FF8200 FLANGE FACER A HEAVY - DUTY FLANGE FACER WITH FACING AND MILLING CAPABILITIES Rugged Machine Design Large, heavy duty construction-grade bearings provide powerful, rigid performance throughout the
Disc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
Air-Cooled Engine Technology
Air-Cooled Engine Technology Air-Cooled Engine Technology Test #1 Review 80 Questions Covers Chapters 1, 2, 4, 5, 22 Careers & Professionalism Tools & Safety Engine Basic Theory &Operation 2 Stroke & 4
LEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
TOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
SERVICING SPECIFICATIONS (1) ENGINE BODY
SERVICING SPECIFICATIONS (1) ENGINE BODY (1/14) Lubricating oil capacity Oil pan depth 124 mm (4.88 in.) 7.0 L 1.85 U.S.gals. 1.54 lmp.gals. 9.5 L 2.51 U.S.gals. 2.09 lmp.gals. Oil pan depth 90 mm (3.54
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
Lubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
MINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
GMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
Contents Section E. Section E Contents. Series
Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts...
Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available.
Overview Logan Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures
EB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Multimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
CONTINUOUS FLIGHT AUGERS AND BITS
Mobile Standard Construction and HEX-COR augers have been tested in the field and independently tested in the laboratory and are proven to be equal to or stronger than any other auger in the industry.
Disc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
MF7. Hydraulic Lift Pumps and Related Components
Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
CONTINENTAL ENGINE PARTS Tel: Fax: CONTINENTAL ENGINE PARTS: F226/F227
CONTINENTAL ENGINE PARTS Tel: 713-864-7084 Fax: 713-864-5190 CONTINENTAL ENGINE PARTS: F226/F227 BORE: 3.3125" 6 Cyl Gas NOTES: Flat Head Engine / Listing Also Includes F6226, PF226 Engine Models APPLICATION:
Contents. AMADA Quality Tooling
Contents AMADA Quality As the global market leader in the manufacture of, AMADA can call upon 40 years of experience. With over 30,000 Machines in operation worldwide, the co-operation and feedback between
COMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
LIGHT-DUTY PUNCHING UNITS
LIGHT-DUTY PUNCHING UNITS For punching channel, angles, extrusions and flat stock up to 10 gauge UNITTOOL Punch & Die Company Inc. 20 Norris St. Buffalo, New York 14207 Phone: 1-716-873-8453 Fax: (USA
Bend Pulleys. Instruction Manual PL-333 June Rev 2.2
Bend Pulleys Instruction Manual PL-333 June 1998 33453330 Rev 2.2 T hank-you for purchasing Milltronics' products. We are committed to satisfying our customers' needs with innovative equipment that is
9-0 CYLINDER/PISTON 9. CYLINDER/PISTON. MXU 500i DX
9 CYLINDER/PISTON SCHEMATIC DRAWING ------------------------------------------------- 9-1 SERVICE INFORMATION------------------------------------------------ 9-2 TROUBLESHOOTING-----------------------------------------------------
Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the
Refer to procedure. Note: Engine; Tightening torque. Service and Repair; Disassembly and Assembly. 25 Nm. Note: Engine.
Engine Cylinder head Refer to procedure Note: Engine; Service and Repair; Disassembly and Assembly Refer to procedure Note: Engine; Service and Repair; Disassembly and Assembly Head bolt reuse/replace
DART Aluminum FORD 351 Small Block Technical Notes
DART Aluminum FORD 351 Small Block Technical Notes Deck Height 9.200 Cleveland 9.500 Windsor Bore 4.00 or 4.125 unfinished Main Bearing Size Cleveland 2.749 Weight. 9.200 91 lb / 9.500 93 lb Maximum bore
PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
Hollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
STAINLESS STEEL PARTS - GENERAL STOCK LIST
STAINLESS STEEL PARTS - GENERAL STOCK LIST MOLNAR PRECISION LTD. PO BOX 1208, PRESTON, LANCASHIRE, PR2 0HG, ENGLAND PHONE 01772 700700 FAX 01772 705075 Web Site: www.manx.co.uk Email: sales@manx.co.uk
CONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
MODEL B HYDRAULIC PUMP
< < SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
Technical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
CX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
Connecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
Link-Belt Cylindrical Roller Bearings
Link-Belt Cylindrical Roller s These bearings require minimum space and provide maximum rated capacity. Link-Belt Cylindrical Roller s Features & Benefits - 1 Link Belt Cylindrical Roller s Features and
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
With over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
Induction Coil Design and Theory. United Induction Heating Machine Limited.
Induction Coil Design and Theory United Induction Heating Machine Limited United Machine Limited http://www.uihm.com/ 2 Basic Points to consider: Success is directly dependant on proper design of the Inductors
Mobile 44 (0) Phone 44 (0) CHAPTER THREE Pipe Beveling Series
CHAPTER THREE Series MiniLathe power STaNDarD capacity* STD. LocKINg range* FeeD STroKe TorQUe MiniLathe Recommended for 2,2 kw 72 356,0 mm 72 348,0 mm 50 mm choice of three 3,0 hp 2,8 14,0 2,8 13,7 2
Combination Clutch/Brake Packages
Packaged CB Performance Series Clutch Products / Brakes Combination Clutch/Brake Packages CB Series clutch/brake combinations are designed for applications requiring a continuous rotational input being