HY-PRO AERO-F Inch & Metric Plug (4P-5P)
|
|
- Austin Harris
- 5 years ago
- Views:
Transcription
1 HY-PRO AERO-F Inch & Metric Vol 7
2 List d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF UNC H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Square Square Plug Dia. Width (4P - 5P) HY-PRO AERO-F
3 List UNF UNC 1/4-20 UNC 1/4-28 UNF 5/16-18 UNC H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Square Square Plug Dia. Width (4P - 5P) List No. Work Material P M K N S H Carbon Stainless Aluminum Nickel Die Cast Titanium Hardened Low Med. High Iron PH Casting Inconel 6Al4V (30 ) SFM ~ good best HY-PRO AERO-F 3
4 List d k Lc Ln L lk 5/16-24 UNF 3/8-16 UNC 3/8-24 UNF 7/16-14 UNC 7/16-20 UNF 1/2-13 UNC H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Square Square Plug Dia. Width (4P - 5P) HY-PRO AERO-F
5 List /2-20 UNF 9/16-18 UNF 5/8-11 UNC 5/8-18 UNF 3/4-10 UNC 3/4-16 UNF 7/8-9 UNC 7/8-14 UNF 1-12 UNF H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Square Square Plug Dia. Width (4P - 5P) List No. Work Material P M K N S H Carbon Stainless Aluminum Nickel Die Cast Titanium Hardened Low Med. High Iron PH Casting Inconel 6Al4V (30 ) SFM ~ good best HY-PRO AERO-F 5
6 List d k Lc Ln L lk M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M8 x 1.0 Note: List metric taps are manufactured to H-limits rather than D-limits. H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Dia. Square Width Square Plug (4P - 5P) HY-PRO AERO-F
7 List (Continued) M10 x 1.5 M10 x 1.25 M12 x 1.75 M12 x 1.5 M12 x 1.25 M14 x 1.5 Note: List metric taps are manufactured to H-limits rather than D-limits. H5 H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Overall Neck Shank Dia. Square Width Square Plug (4P - 5P) List No. Work Material P M K N S H Carbon Stainless Aluminum Nickel Die Cast Titanium Hardened Low Med. High Iron PH Casting Inconel 6Al4V (30 ) SFM ~ good best HY-PRO AERO-F 7
8 Safe use of cutting tools Use safety cover, safety glasses and safety shoes during operation. Do not touch cutting edges with bare hands. Do not touch cutting chips with bare hands. Chips will be hot after cutting. Stop cutting when the tool becomes dull. Stop cutting operation immediately if you hear any abnormal cutting sounds. Do not modify tools. Please use appropriate tools for the operation. Check dimensions to ensure proper selection. TEXAS (National Headquarters) 1945 W. Walnut Hill Ln. Irving, TX 75038, USA Toll Free: Fax: ILLINOIS 676 East Fullerton Avenue Glendale Heights, IL 60139, USA Toll Free: Fax: CALIFORNIA 1921 Miraloma Ave. Suite B Placentia, CA 92870, USA Toll Free: Fax: OHIO 3611 Socialville Foster Rd. Ste 102 Mason, OH 45040, USA Phone: Fax: GEORGIA 5324 Highway 85 Ste 100 Forest Park, GA 30297, USA Toll Free: Fax: CANADA 538 King Forest Court Burlington, ON L7P 5C1, Canada Toll Free: Fax: MEXICO Avenida Central No. 186 Col. Nueva Industrial Vallejo Ciudad de Mexico, D.F., Mexico Phone: (52) Fax: (52) Copyright 2018 OSG USA, INC. All rights reserved. Printed in USA. EDP#800177CA-V7
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationCustomer Focused & Technology Driven
Micro Tools Customer Focused & Technology Driven With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladu surpasses its goal of providing
More informationVol. 2 HY-PRO SHRINK
Vol. 2 HY-PRO SHRINK Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the
More informationTechnical Information Cutting Speeds
Technical Information Cutting Speeds Speed, Feed & Power Please use the chart below as a guide only. Many variables contribute to the optimum parameters for each application. These variables include: particular
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationAtLite. Rival Series. Approved for New York City. Emergency Lighting
AtLite Approved for New York City Rival Emergency Lighting The AtLite Rival is a complete family of exit and emergency lighting fixtures that have been designed to offer both performance and value. All
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationSteel Pipe Nipples & Malleable Fittings
March 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Steel Pipe Nipples & Malleable Fittings b u i l d i n g c o n n e c t i o n s
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationPTTC Tube Cutter (Push Type Tube Cutter)
PTTC Tube Cutter (Push Type Tube Cutter) For Tube OD Range 3/8 and 5/8-2-1/2 Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationAIR BAGS SUSPENSION. Quality Tested Replacement Components
SUSPENSION AIR BAGS Quality Tested Replacement Components Looking for more suspension components? 360º product images, Rotatable 3D Truck Models, Shop by Schematics & seasonal specials available online
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationP and P Receptacle PCB Hole Patterns
Series 79 790-028P and 790-043P 790-028P and 790-043P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for
More informationBDF-1000 Barn Door Hardware BDF-Series 1000
BARN DOOR HARDWARE BDF-1000 Barn Door Hardware BDF-Series 1000 Type: Top Mount Single Wheel Material: Metal Construction Finish: Matte Black (powder-coated), Satin Nickel Designed for Wood Doors: 1-3/8
More informationMA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationTECHNICAL DATASHEET FLOWSEAL MS - Triple Offset Valves ASME/Imperial
brands you trust. TECHNICAL DATASHEET FLOWSEAL MS - Triple Offset Valves ASME/Imperial Index & Model Numbers for Gears with Hand Wheel Model Numbers for Gears with Hand Wheels...2 Figure Number System...3
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationSummer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts
Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid
More informationTrike. Instructions. Model Number: 72633
Trike Model Number: 72633 Instructions Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. (Tools
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationSPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
More informationBi-Metal Hole Saws Designed for the Professional
Bi-Metal Hole Saws Designed for the Professional New Improved Thicker, FLEX FREE backing plate for clean true holes and longer tool life Improved bi-metal construction for long life and durability Variable
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationPOWER FEED INSTALLATION Model M-2500 General Purpose Kit
POWER FEED INSTALLATION Model M-2500 General Purpose Kit REFERENCE DRAWINGS ENCLOSED NA-5444 Bevel Gear Installation NB-3438 Power Feed Installation ND-6292 Type 140 Servo Drive ND-6293 Type 150 Servo
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationNIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
More informationCylinder Liner and Piston Updates
ummins ISX/QSX ylinder Liner and Piston Updates INTERSTATE-MBEE, LL 5300 Lakeside Avenue leveland, Ohio 44114 USA 216-881-0015 Toll Free: 1-800-321-4234 Fax: 216-881-0805 www.interstate-mcbee.com E-mail:
More informationNewest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
More informationTable of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
More informationF L A C110 FLANGED FITTINGS CAST IRON & DUCTILE IRON 2007 Sigma Corporation, All Rights Reserved
F L A C110 & N GE D 2-54 / BASIC SPECIFICATIONS www.sigmaco.com / MATERIAL: Cast Iron: ASTM A48, Grade 25B (2-14 ) / Grade 30B (16-54 ) Ductile Iron ASTM A536 PRESSURE: 250 PSI Water Working Pressure for
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationBoring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials
oring Reaming urnishing Threading rilling S 320 High Penetration Solid arbide Solutions Specials S 320 High Penetration Solid arbide rilling System iameter Range: 3.00mm - 20.00mm (0.1181-0.7874 ) eyond
More informationTAKISAWA TAIWAN TURNING CENTERS Product Range
Established in 1972, Takisawa Taiwan offers a broad range of turning centers with advanced technological features providing customers with solutions that maximize productivity while still offering exceptional
More informationHAS Rear Air Suspension
HAS Rear Air Suspension LIT NO: SP-149 DATE: August 2016 REVISION: I CONTENTS DESCRIPTION Page Parts Lists HAS for Vehicles Equipped with Air Disc Brakes 21K 23K 40K 46K.... 2 HAS for Vehicles Equipped
More informationFilters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information
142.9 INLET 1.38 35 OUTLET Index 1.25 31.8 1. General 1.4 Tools Required for Maintenance 1.5 Torque Requirements 2. Maintenance 3. Changing the Element 4. Spare Parts List 5. Replacement Element Model
More informationSupply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationMA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationMS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationSERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
More informationTURBO DRIVE INSTALLATION MODEL 3700T TABLE FEED Sharp, Chevalier & Others
TURBO DRIVE INSTALLATION MODEL 3700T TABLE FEED Sharp, Chevalier & Others NOTE This Turbo Drive Table Feed is configured for mounting the feed on the right hand end of the table. The lead screw pitch is
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationSMALL DIAMETER WHEELS
SMALL DIAMETER WHEELS CUTTING & SNAGGING WHEELS FOR DIE GRINDERS Get the most demanding jobs done right and done fast. 800.835.9999 / weilerabrasives.com SELECTING THE RIGHT WHEEL MAX PERFORMANCE SUPERIOR
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationSELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES
SELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES The Building Blocks of Low Cost Drilling and Tapping Automation Table of Contents PAGE 1 FIG. 1 PNEUMATIC MK III WITH STANDARD 3/8 CAPACITY
More informationY83 Briquetting Press
Y83 Briquetting Press Y83-250 1450 860 2970 Y83-250 Scrap Briquetting Press Model: Y83-250 Power System (Motor) System Parameters Type: Y180M-4 Main Cyl. Force: 200 Ton Rated Power: 18.5 kw Auxiliary Cyl.
More informationProduct features and decoration may vary from the photograph above.
Action Sounds Trike B1480 Instructions Product features and decoration may vary from the photograph above. Please keep this instruction sheet for future reference, as it contains important information.
More informationManufactured Home Shipments by Product Mix ( )
Manufactured Home Shipments by Product Mix (1990-2014) Data Source: Institute for Building Technology and Safety (IBTS) * "Destination Pending" represents month-end finished home inventory at a plant.
More informationRT / RTE Rear Suspension
RT / RTE Rear Suspension LIT NO: SP-168 DATE: January 2017 REVISION: F CONTENTS DESCRIPTION Parts Lists Page RT/RTE 34K 40K 46K.... 2 RT/RTE 48K 52K.... 4 RT 65K 70K Heavy-duty... 6 DESCRIPTION Selection
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationTURBO DRIVE INSTALLATION MODEL 4380T KNEE FEED Sharp, Alliant & Others
TURBO DRIVE INSTALLATION MODEL 4380T KNEE FEED Sharp, Alliant & Others NOTE This Turbo Drive Knee Feed is configured for mounting the feed on the front of the knee with the keypad facing left. The lead
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
More informationLOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS
LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS Muncie Power Products, Inc. is a proud manufacturer of power take-offs and fluid power components for applications within the
More informationTO: AUTHORIZED Portable Electric Tool SERVICE STATIONS DATE: December 2006 factory SERVICE / SALES SUPPORT BRANCH CENTERS
TO: AUTHORIZED Portable Electric Tool SERVICE STATIONS DATE: December 2006 factory SERVICE / SALES SUPPORT BRANCH CENTERS TOOL(S) \ PRODUCT(S) AFFECTED: 48-11-1830 18.0V - V Li-Ion Battery Pack 48-11-2830
More informationR Rear Suspension R 48K 52K R 40K 46K R 65K R 85K 100K 120K CONTENTS. LIT NO: SP-167 DATE: January 2017 REVISION: D
R Rear Suspension LIT NO: SP-167 DATE: January 2017 REVISION: D CONTENTS DESCRIPTION Parts Lists PAGE R 40K 46K.... 2 R 48K 52K... 4 R 65K... 6 R 85K 100K 120K.... 8 DESCRIPTION PAGE Special Tools... 10
More information4 5 GPM 7 GPM 10 GPM 15 GPM 20 GPM 30 GPM 35 GPM 55 GPM 95 GPM
PRO SERIES STAINLESS STEEL SUBMERSIBLE S 4 5 GPM 7 GPM 0 GPM 5 GPM 20 GPM 30 GPM 35 GPM 55 GPM 95 GPM SPECIFICATIONS Capacity: 5 to 20 GPM Heads: Up to 200 Feet 3450 RPM - 60 HZ Recommended for Clean Water
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationWhat s New in This Catalog. Stainless Steel H
What s New in This Catalog S Stainless Steel H At The Heart Of What Drives Your World... Since 1892, HUB CITY has a reputation for producing tough, dependable driveline components for industry and agriculture
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More information2013 Migration Patterns traffic flow by state/province
Interstate and Cross-Border 2013 Migration Patterns traffic flow by state/province Based on 77,308 Interstate Household Goods Moves from January 1, 2013 through December 31, 2013 YUKON TERRITORY 0 0 BC
More informationTHREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationBOCA. Ingrade Low Voltage Lighting Products
BOCA Ingrade Low Voltage Lighting Products 1 BOCA 631 BOCA 631 4 Diameter Ingrade Drive Over 12V MR16 50W max. Temperature Reduction / Cool Lens Technology Recessed Mounting Optional Integral Transformer
More informationAHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-1201 TM AHEAD OF THE FLOW Butterfly Valves General Index Butterfly Valves WARRANTY..........................................4 BUTTERFLY VALVES..................................5-27 OPTIONS
More informationFeatures. Dimensions - Materials - & Parts & Parts List List
MOYGRO check valve Features Compact Design - Short face-to-face length enabling installation in restricted spaces not possible with conventional check valves. Spring Assisted Closure - Providing faster
More informationSide Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
More informationFuel Pickup Kit ( ) Installation Guide
Pacific Performance Engineering, Inc. PPEdiesel.com 2001-2005 Fuel Pickup Kit (113051000) Installation Guide Technical Support (714) 985-4825 Rev: 12/02/2016 v7 * Note: LEGAL IN CALIFORNIA ONLY FOR RACING
More informationFrom. McCROMETER, INC WEST STETSON AVENUE HEMET, CA Phone (951) Toll Free (800) Fax (951)
SPI Mag MODEL 282L SINGLE POINT INSERTION ELECTROMAGNETIC FLOW METER 2 SENSOR SUBMITTAL PACKAGE From McCROMETER, INC. 3255 WEST STETSON AVENUE HEMET, CA 92545 Phone (951) 652-6811 Toll Free (800) 220-2279
More informationMedium Voltage Motors
Medium Voltage Motors Toshiba Leading Innovation in Medium Voltage Motors Toshiba s new medium voltage totally-enclosed fan-cooled motor series, the Dura-Bull TX, is designed and made in Texas and offers
More information2016 Migration Patterns traffic flow by state/province
Interstate and Cross-Border 2016 Migration Patterns traffic flow by state/province Based on 75,427 Interstate Household Goods Moves from January 1, 2016 through December 15, 2016 NL 8 13 YUKON TERRITORY
More informationGrow-With-Me Trike. Instructions. Model Number: Keep these instructions for future reference, as they contain important information.
Grow-With-Me Trike Instructions Model Number: 72668 Keep these instructions for future reference, as they contain important information. Adult assembly is required. Tools needed for assembly: Hammer, Phillips
More information265 CONGRESS AVENUE SATURDAY SERVICE. Bus Schedule Effective December 2, B Bull Hill Lane 265R Bayshore via Jones Hill Rd 265S Savin Rock
SATURDAY SERVICE New Haven Campbell Avenue West Haven 1 2 3 4 5 9 10 8 6 7 Temple & Chapel 265 5:45 5:49 5:55 5:58 C6:03.......... 265B 6:05 6:09 6:15 6:18 6:23...... 6:28 6:34 265R 6:25 6:29 6:35 6:38
More information"XLS" Series 5 H.P. BRIGGS & STRATTON. Supplied with rings, circlips & lightweight wrist pin
5 H.P. BRIGGS & STRATTON "XLS" Series The same race winning design and manufacturing technology that is applied to Wiseco s NASCAR piston program has been incorporated into our "XLS" Series 5HP Briggs
More information