MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
|
|
- Alexina Tucker
- 5 years ago
- Views:
Transcription
1 MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed rpm Stroke length in. 4.3 mm Maximum rated power hp 5.5 kw Maximum rod load lbs kn Weight MA-155M lbs. MA-155L lbs. MA-155H lbs. ENGLISH UNITS MA-155M PLUNGER SIZE in. STUFFING BOX BORE in. MAX psi *GALLON PER/REV. 250 rpm US GPM 300 rpm US GPM 350 rpm US GPM 400 rpm US GPM 450 rpm US GPM hp rpm METRIC UNITS MA-155M PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR *LITER PER/REV. 250 rpm LPM 300 rpm LPM 350 rpm LPM 400 rpm LPM 450 rpm LPM kw rpm ENGLISH UNITS MA-155L PLUNGER SIZE in. STUFFING BOX BORE in. MAX psi *GALLON PER/REV. 250 rpm US GPM 300 rpm US GPM 350 rpm US GPM 400 rpm US GPM 450 rpm US GPM hp rpm
2 METRIC UNITS MA-155L PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR * LITER PER/REV. 250 rpm LPM 300 rpm LPM 350 rpm LPM 400 rpm LPM 450 rpm LPM kw rpm ENGLISH UNITS MA-155H PLUNGER SIZE IN. STUFFING BOX BORE IN. MAX psi. *GALLON PER/REV. 250 rpm US GPM 300 rpm US GPM 350 rpm US GPM 400 rpm US GPM 450 rpm US GPM hp rpm METRIC UNITS MA-155H PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR * LITER PER/REV. 250 rpm LPM 300 rpm LPM 350 rpm LPM 400 rpm LPM 450 rpm LPM kw rpm *Displacement based on 100% Volumetric Efficiency Power based on 90% Mechanical Efficiency Ihp = Pump rpm = USGPM x (Discharge psig - 1/2 Suction psig) M 3 /HR x (Discharge Bar - 1/2 SuctionBar) IkW = USGPM Desired M 3 /HR Desired Pump rpm = USGPM per Revolution of Selected Plunger M 3 per Revolution of Selected Plunger
3 MA-155M Triplex Pump 3/16 KEYWAY /4 2-7/8 2-3/8 43 PUMP CRANKSHAFT PUMP 12-1/ TYP. 1 x 1 x 7 KEY 2 TYP. 5-3/4 TYP /8 41-/16 2 ANSI 1500 FF /4 6-1/2 9-1/8 SUCTION CONNECTION 4 ANSI 150 FF 53-15/ /4 2 ANSI 1500 RF /8 9-7/8 5-1/8 SUCTION CONNECTION 4 ANSI 150 RF 33
4 MA-155L Triplex Pump 54-1/2 43 PUMP 1 x 1 x 7 KEY ANSI 600 FF 20-13/ /2 SUCTION CONNECTION 6 ANSI 150 FF 12-1/ ANSI 600 RF /2 SUCTION CONNECTION 6 ANSI 150 RF 36-1/8
5 MA-155H Triplex Pump 3/8 x 3/16 KEYWAY PUMP 1 x 1 x 7 KEY /8 2 API /8 6-1/8 SUCTION CONNECTION 4 ANSI 300 RTJ
6 All drawings and specifications subject to change without notice. ENGINEERING DATA POWER END ENGINEERING DATA Max. Input 450 rpm Rated Continuous Plunger Load...9,087 lbs. Normal Continuous Speed Range, 155M, 155L to 420 rpm 155H to 350 rpm Minimum Speed rpm Oil Capacity...22 U.S. Qts Power End Oiling System... Splash Power Frame, One-Piece...Cast Iron Crosshead, Full Cylindrical...Cast Iron Dia. x Length...5-3/4 x 6-3/16 in. Crankshaft...Ductile Iron Crankshaft Diameters: At Tapered Roller Bearings...4-3/4 in. At Crankpin Bearings, Dia. x Length...4-1/2 x 3-3/4 in. Crosshead (Wrist) Pin, Case-Hardened and Ground... AISI 8620 Wrist Pin Bushing, SAE 660, Dia. x Width 155H /16 x 2 in. Main Bearings, Tapered Roller... Timken Crankpin Bearings, Precision Automotive...Steel Backed, Babbitt-Lined Extension (Pony) Rod, Integral w/ Plungers 155M, 155L S.ST. 155H PH S.ST. Connecting Rod, Automotive Type...Ductile Iron Average Crosshead 450 rpm fpm Minimum Life Expectancy, Main Bearings, L ,000+ hr. LIQUID END ENGINEERING DATA Max. Continuous Working Pressure 155M... 3,600 psi 155L... 1,400 psi 155H... 5,000 psi Hydrostatic Test 155M... 5,400 psi 155L... 2,100 psi 155H... 7,500 psi Available Liquid End Materials, A.S.T.M. Stainless Steel Block 155M, 155L...Various Grades Stainless Steel Block 155H Duplex or 15-5 PH S.ST. Nickel Aluminum Bronze Casting 155M, 155L...B148-C955 Carbon Steel Block 155M... A105 Ductile Iron Casting 155L...A Plunger Type Rokide (Chromium Oxide-Coated) S.ST. Stuffing Boxes, Field-Removable and Replaceable Nickel Aluminum Bronze 155M, 155L...B148-C955 Carbon Steel 155M Packing Types Available Gland-Loaded, Non-Adjustable 155M, 155L...Style 838 Spring-Loaded, Braided PTFE Coating & Aramid Fiber 155M, 155L...Style 140 Spring-Loaded, Cup-Type 155M, 155L...Style 120X Spring-Loaded, Garlock 155L... Style 8921K Spring-Loaded, Chevron 155H...Style 120X Spring-Loaded, Aramid Fiber Compression 155H...Style 140 Valve Cover and Cyl. Head Plugs S.ST. Retainer Plates, Ductile Iron, A.S.T.M....A Seals, Stuffing Boxes, Valve Covers, Cyl. Heads...Buna-N Disc Valve Types: Regularly Furnished, Acetal Resin, 155M, 155L... Acetal Optional, Hardened and Lapped, 155M, 155L PH S.ST. Standard, Disc, Hardened and Lapped, 155H PH S.ST. Optional, Abrasion Resistant, Hardened 155H PH S.ST. Valve Spring Material...Inconel Valve Seat, Liquid Passage Areas Plate (disc) Valves, (Acetal or S.ST.) 155M sq.in. 155L sq.in. 155H sq.in. Avg. Liquid 450 rpm thru Valves 155M fps 155L fps 155H fps thru Suction Manifold 155M fps 155L fps 155H fps thru Discharge Manifold 155M fps 155L fps 155H fps
7 MA-155M Triplex Pump REQUIRED DIRECTION OF ROTATION 8-15/16 DISCHARGE # 80-3/4 9-1/8 22-1/4 SUCTION 4 150# DRIP PAN DRAIN 2 NPTF OPPOSITE SIDE 41-/ /2 90-1/2 12-3/16 LIFTING EYES AT FOUR CORNERS 34-1/2 6-1/ /16 50 ANCHOR HOLES FOUR PLACES MA-155L Triplex Pump REQUIRED DIRECTION OF ROTATION S 3 ANSI 600 FF 80-3/ /4 SUCTION CONNECTIONS 6 ANSI 150 FF 12-1/2 25 DRIP PAN DRAIN 2 NPTF OPPOSITE SIDE 90-1/2 LIFTING EYES AT FOUR CORNERS 50 REQUIRED DIRECTION OF ROTATION S 3 ANSI 600 RF 80-3/ SUCTION CONNECTIONS 6 ANSI 150 RF 21-1/4 36-1/8 DRIP PAN DRAIN 2 NPTF OPPOSITE SIDE 90-1/2 LIFTING EYES AT FOUR CORNERS 50
8 MA-155H Triplex Pump REQUIRED DIRECTION OF ROTATION S 2 API /4 8-7/8 21-7/8 SUCTION CONNECTIONS 4 ANSI 300 RTJ DRIP PAN DRAIN 2 NPTF OPPOSITE SIDE 41-/ /2 90-1/2 12-3/16 LIFTING EYES AT FOUR CORNERS 34-1/2 6-1/ /16 50 ANCHOR HOLES FOUR PLACES 01 MYERS PARKWAY, 490 PINEBUSH ROAD, UNIT 4, ASHLAND, OHIO CAMBRIDGE, ONTARIO N1T 0A5 Inconel is a registered trademark of the Special Metals family of companies. Timken is a registered trademark of The Timken Company. Rokide is a registered trademark of Saint-Gobain Abrasives, Inc. Myers is a registered trademark of Pentair. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. MA /27/ Pentair plc All Rights Reserved.
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationMA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP
MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP Number of Plungers... 5 Maximum Rated Speed...400 rpm Stroke Length...5.00 inches 127 mm Maximum Rated Power...300.0 hp 224 kw Maximum Rod Load 300M,
More informationMODELS TRIPLEX PUMPS MA-95L, MA-95M, MA-120L, MA-120L-HD, MA-120M, MA-120M-HD, SC-170, SC-170L, SC-170H, AND SC-170DD INSTALLATION AND SERVICE MANUAL
MODELS MA-9L, MA-9M, MA-0L, MA-0L-HD, MA-0M, MA-0M-HD, SC-70, SC-70L, SC-70H, AND SC-70DD TRIPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual
More informationMA-45M, MA-75L, MA-75M, MA-75H, SC-80, SC-80H, SC-115L, SC-115, SC-115H
MODELS MA-M, MA-7L, MA-7M, MA-7H, SC-80, SC-80H, SC-L, SC-, SC-H QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 INSTALLATION AND SERVICE MANUAL
MODELS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, AND SC-300 INSTALLATION AND SERVICE MANUAL
MODELS MA-40L, MA-40L-HD, MA-40M, MA-40M-HD, MA-40K, SC-300L, AND SC-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationAppendix B Specifications for Vertical Single-Acting Models
Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationMODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL
MODELS CX0 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationModel T25 Triplex Power Pump
weatherford Model t25 triplex power pump Model T25 Triplex Power Pump Pump and Fluid Systems Weatherford s Model T25 is a single-acting, triplex plunger pump rated at 23 HP in continuous duty service and
More informationSC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL
SC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system.
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More informationTABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
More informationModel T10 Triplex Power Pump
Weatherford s Model T10 is a single-acting triplex plunger pump rated at 10 HP in continuous duty service and up to 16 HP in intermittent duty. This versatile pump is offered with a variety of material
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationMYERS MODELS 4RC AND 4RCX
3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids
More informationseries2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION
TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger
More informationModel T5 Triplex Power Pump
Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous-duty service and up to 8 HP in intermittent duty. This versatile pump is offered with a variety of material and
More informationF-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
More informationMODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL
MODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationNOTE! To the installer: Please make sure you provide this manual to the owner of the equipment or to the responsible party who maintains the system.
CMP SERIES CPM5-5B (25905F00) CPM5-5B-H/D (25905F0) CPM8-5B (25905F0) CPM8-5B-H/D (25905F0) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please make sure you
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationFMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.
FMC BEAN FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets. WATER esigned for continuous duty applications, the FMC Technologies Bean piston line increases drilling
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationHusky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More informationBARESHAFT PUMP. UNx FEATURES AND BENEFITS. Pump & Fluid Ends 40,000 PSI
UNx BARESHAFT PUMP FEATURES AND BENEFITS The Jetstream 40,000 psi UNx Bareshaft Pump provides unrivaled durability and strength. The pump is capable of power inputs up to 325 horsepower and, coupled with
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationThe SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
More informationMud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD
More informationFMC Technologies Pumps are manufactured to ISO-9001 standards at its state-of-the-art facility in Stephenville, Texas.
FMC Technologies Pumps are manufactured to ISO-9001 standards at its state-of-the-art facility in Stephenville, Texas. FMC Technologies reciprocating pumps have provided exceptional performance and value
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationModel T10 Triplex Power Pump
weatherford Model t10 triplex power pump Pump and Fluid Systems Model T10 Triplex Power Pump Weatherford s Model T10 is a single-acting, triplex plunger pump rated at 10 HP in continuous duty service and
More informationModel T5 Triplex Power Pump
weatherford Model t5 triplex power pump Pump and Fluid Systems Model T5 Triplex Power Pump Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous duty service and up
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION A B D C E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD ISSUE 12/05 PAGE 6707
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationFrame and Running Gear Data: MOS
Frame and Running Gear Data: MOS 1. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 5MOS 6MOS 7MOS 1.0 General - Stroke (in) 5.0 6.0 7.0 Rod Diameter (in) 2.25 2.25 2.25 Max.
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationPUMPS & FLUID ENDS. THE UNx ADVANTAGE UP TO 15,000 PSI (1000 BAR) FEATURES AND BENEFITS
THE UNx ADVANTAGE FEATURES AND BENEFITS Through nearly twenty years of service, the Jetstream UNx Fluid End has remained the most efficient, easy-to-use, and versatile waterblast tool available. Standard
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationFrame and Running Gear Data: CVIP. A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP. Stroke (in.) Rod Diameter (in.)
Frame and Running Gear Data: CVIP I. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP 1.0 General Stroke (in.) 4.0 5.0 6.0 Rod Diameter (in.) 2.0 2.0 2.0 Maximum
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationMYERS S Series 4" Submersible Pumps
The S Series 4 submersibles have been a successful entry in the Myers well pump line for many years and have a history of tremendous reliability. The all stainless steel construction is ideal for extreme
More informationCPM SERIES INDUSTRIAL PUMPS
MODELS CPM18-40 AND CPM24-30 CPM SERIES INDUSTRIAL PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationVIKING. Series LVP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA Section 445 Page Issue C
VIKING Section 445 Page 445.1 Issue C PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping
More informationCalle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
More informationINSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST
CMP SERIES CPM15-15B (25905F300) CPM15-15B-H/D (25905F301) CPM18-15B (25905F303) CPM18-15B-H/D (25905F304) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationVIKING JACKETED ASPHALT PUMPS
VIKING ED ASPHALT PUMPS SERIES 34 AND 434 Section 430 Page 430.1 Issue G FEATURES 1 Pressure 1 Temperature 1 Viscosity 1 Flow To 100 PSI (6.9 Bar) -60 F. to +450 F. (-51 C. to +232 C.) 31 SSU to 250,000
More informationTechnical Specifications 11/2014. GE Oil & Gas. Series Texsteam* Electric Driven Injection Pump. GE Data Classification : Public
GE Oil & Gas Technical Specifications 11/2014 Series 2500 Texsteam* Electric n Injection Pump GE Data Classification : Public Contents Product Features...1 Options:...1 Model Designation...1 Gear Reducer
More informationMA-60M TRIPLEX. All drawings and specifications subject to change without notice.
1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA (CONTINUED)... 5 GENERAL ENGINEERING DATA... 5 PUMP NAME PLATE... 6 PUMP CROSS-SECTION...
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationModel GP5128. Triplex Ceramic Plunger Pump Operating Instructions / Manual
Model GP5128 Triplex Ceramic Plunger Pump Operating Instructions / Manual Updated 07/18 Contents: Installation Instructions: page 2 Pump Specifications: page 3 Exploded View: page 4 Parts List: page 5
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More information3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationBERMAD Waterworks. 800 Series. Technical Specifications Metric
Technical Specifications SI 800 Metric Series Patterns and Sizes "Y" Pattern DN40-500 Angle DN40-450 Connection Standard Flanged: ISO 7005-1(ISO 10, 16, 25 & 40) Water Temperature Up to 80ºC Working pressure
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More information