Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
|
|
- Colin Lang
- 6 years ago
- Views:
Transcription
1 Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG
2 Husky 3275 Aluminum Pumps Technical Specifications Maximum fluid working pressure psi (8.4 bar, 0.84 MPa) Maximum free flow delivery* gpm (1,041 lpm) Maximum pump speed cpm Displacement per cycle** gallon (7.6 liter) Maximum suction lift (DK3666) ft (2.4 m) dry Maximum size pumpable solids in (9.4 mm) Maximum diaphragm operating temperature*** PTFE F (104.4 C) Santoprene F (82.2 C) TPE F (65.5 C) Geolast F (65.5 C) Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) 105 cpm dba Maximum air consumption scfm (9.1 m3/min) Air consumption at 70 psi (4.7 bar, 0.47 MPa)/100 gpm (379 lpm) scfm (1.26 m3/min) Air pressure operating range to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa) Air inlet size /4 npt(f) Fluid inlet & outlet size in (76.2 mm) ANSI 4 bolt flange/din 8-bolt flange internal thread is 3 npt or bspt Wetted parts varies by model, see instruction manual Weight lb (68 kg) Instruction manual * Flow rates are with muffler and do not vary based on diaphragm material ** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type *** Actual pump performance may be affected by prolonged usage at temperature Typical System Drawing Husky 3275 Above Ground Gravity Feed PROCESS EQUIPMENT CATALOG 51
3 Husky 3275 Aluminum Pumps Buy Graco Husky Diaphragm Pumps at Ordering Information D X X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks Diaphragms PUMP SIZE (AIR MOTOR TYPE AND MATERIAL) WETTED PARTS SEATS BALLS DIAPHRAGM K = 3 (76.2 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 1 = PTFE 1 = PTFE C = Aluminum (bsp) 5 = TPE 2 = Acetal 5 = TPE 6 = Santoprene G = Geolast 6 = Santoprene G = Geolast G = Geolast Accessories See page 76 for additional accessories. Performance Chart FLUID OUTLET PRESSURE psi (bar, MPa) 140 (9.8, 0.98) 120 (8.4, 0.84) 100 (7, 0.7) 80 (5.5, 0.55) 60 (4.1, 0.41) 40 (2.8, 0.28) 20 (1.4, 0.14) 0 gpm (lpm) 0 C D A B 30 (114) 60 (227) Husky 3275 Performance 90 (341) E 120 (454) E 150 (568) 180 (454) FLUID FLOW (Pump tested in water with inlet submerged D A B C 210 (795) 240 (908) 270 (1022) 350 (9.8) 300 (8.4) 250 (7.0) 200 (5.6) 150 (4.2) 100 (2.8) 50 (1.4) AIR CONSUMPTION scfm (m 3 /min AIR PRESSURE LEGEND A = at 120 psi (8.4 bar, 0.84 MPa) Air Consumption B = at 100 psi (7 bar, 0.7 MPa) Fluid Flow C = at 70 psi (4.8 bar, 0.48 MPa) D = at 40 psi (2.8 bar, 0.28 MPa) E = at 20 psi (1.4 bar, 0.14 MPa) 52 PROCESS EQUIPMENT CATALOG
4 Husky 3275 Aluminum Pumps Popular Models Part Number Part Number (NPT Ported) (BSP Ported) Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control* Aluminum DK3311 NA DKC311 NA Stainless Steel PTFE PTFE D0K DK3316 NA DKC316 NA Stainless Steel PTFE Santoprene D0K DK3366 NA DKC366 NA Stainless Steel Santoprene Santoprene D0K DK3515 NA DKC515 NA TPE PTFE TPE D0K DK3525 NA DKC525 NA TPE Acetal TPE D0K DK3565 NA DKC565 NA TPE Santoprene TPE D0K DK3611 NA DKC611 NA Santoprene PTFE PTFE D0K DK3616 NA DKC616 NA Santoprene PTFE Santoprene D0K DK3666 NA DKC666 NA Santoprene Santoprene Santoprene D0K DK3GG6 NA DKCGG6 NA Geolast Geolast Santoprene D0KGG DK3GGG NA DKCGGG NA Geolast Geolast Geolast D0KGGG * Air control includes air regulator and filter with gauge Dimensions 8.39 in (213 mm) Eight Holes 0.84 in (21.5 mm) (DIN) Four Holes 0.84 in (21.5 mm) (ANSI) Fluid Outlet (Top Manifold) Fluid Inlet (Bottom Manifold 3.25 in (83 mm) Diameter ID 4.75 in (121 mm) in (524.5 mm) Flanges are Flat Faced 28.6 in (727 mm) 20.3 in (516 mm) 24.5 in (622.5 mm) 4.1 in (104 mm) in (430 mm) Air Exhaust (muffler included): 1 npt(f) in (5 mm) 7.9 in (200 mm) OD 12 in (305 mm) 30.5 in (774 mm) 6.5 in (165 mm) 13 in (330 mm) 15 in (381 mm) PROCESS EQUIPMENT CATALOG 53
5 Pump Selection Key Wetted Parts Material Options Acetal Material used for seats, balls & wetted body parts Buna-N Material used for seats, balls and diaphragms Geolast Material used for seats, balls & diaphragms Aluminum Material used for air motor & wetted body parts TPE Material used for seats, balls & diaphragms Ductile Iron Material used for wetted body parts Santoprene Material used for seats, balls & diaphragms Hardened SST Material used for seats and balls PVDF Material used for wetted body parts & seats PTFE Material used for balls & diaphragms Polypropylene Material used for air motor, wetted body parts, seats & balls Fluoroelastomer Material used for seats, balls & diaphragms Stainless Steel Material used for air motor, wetted body parts, and seats and balls All other trademarks mentioned herein are the property of their respective owners. PROCESS EQUIPMENT CATALOG 9
6 Diaphragm Compatibility 31
7 Diaphragm Compatibility 32
8 Material Viscosity Considerations The Husky 205 can handle up to 500 cps material The Husky 3275 can handle up to 25,000 cps material 40
Husky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationProcess Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications
Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications PROVEN QUALITY. LEADING TECHNOLOGY. Table of Contents PROCESS EQUIPMENT AND ACCESSORIES TABLE OF CONTENTS Selection
More informationProcess Equipment Catalog Pumping Solutions for Process Industries
Process Equipment atalog Pumping Solutions for Process Industries Table of ontents Process Equipment uyer s Guide ontents New Products... 2 Pump Model Overviews... 3 Pump Selection Key for ODD Pumps...
More informationInk Manufacturing and Printing Solutions
Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality
More informationHusky 1050 Plastic Pumps Air-Operated Double Diaphragm
PRT NO. ONFIGURTION NO. SERIL NO. TE OE SERIES MX WPR PSI-bar ME IN Husky 15 Plastic Pumps ir-operated ouble iaphragm Husky 15 Selector Tool To order a Husky 15, use the online selector tool at www.graco.com/process
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
More informationHusky 515 / 716 Air-Operated Diaphragm Pumps
First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationInstructions Parts List
Instructions Parts List ALUMINUM AND STAINLESS STEEL Husky 040 Air-Operated Diaphragm Pumps Aluminum Model Shown 08479AL 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 0 psi (0.8 MPa, 8 bar) Maximum
More informationElectric Diaphragm Pumps
Electric Diaphragm Pumps 1" and 2" Electric Operated Double Diaphragm Pumps for industrial, food, beverages and cosmetic applications Not just an electric double diaphragm pump, it s much more! The only
More informationVersa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationInstructions Parts List
Instructions Parts List ALUMINUM AND STAINLESS STEEL Husky 590 Air-Operated Diaphragm Pumps 0844ZAB.5 inch AODD pump for fluid transfer applications. For professional use only. See Models on page for a
More informationHusky 3300 Air-Operated Diaphragm Pump
/ aximiliano Thous, 22. 46009, Valencia (spaña) Operation usky 3300 ir-operated iaphragm Pump 30410 N eavy-duty 3-inch pump with large flow paths for fluid transfer applications, including high-viscosity
More informationE8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationDP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
More information3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated Pumps for Process Industries Superior Pumping Technology 55 Gallon Drum Transfer and Supply Pump from your 55 gallon drums with our double diaphragm or piston evacuation
More informationADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.
ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points
More informationInstructions Parts List
Instructions Parts List ALUMINUM AND STAINLESS STEEL Husky 040 Air-Operated Diaphragm Pumps inch AODD pump for fluid transfer applications. For professional use only. See Models on page for a list of pump
More informationInstructions Parts List
Instructions Parts List ALUMINUM AND STAINLESS STEEL Husky 1040 Air-Operated Diaphragm Pumps Aluminum Model Shown 120 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 120 psi (0.8 MPa, 8 bar) Maximum
More informationAluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
More informationInstructions Parts List
Instructions Parts List ALUMINUM, STAINLESS, AND DUCTILE IRON Husky50 Air Operated Diaphragm Pumps 308368AM See Models on page for a list of pump models and descriptions. 0 psi (0.8 MPa, 8 bar) Maximum
More informationInstructions Parts List
Instructions Parts List POLYPROPYLENE AND PVDF Husky 50 Air-Operated Diaphragm Pumps 08550ZAC inch AODD pump for fluid transfer applications. For professional use only. Not approved to European explosive
More informationAir Operated Diaphragm Pumps
Instructions Air Operated Diaphragm Pumps 30898W 00 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 00 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure ACETAL, POLYPROPYLENE, AND PVDF Husky 55 Model
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco Husky 3300 Parts 3300A, Aluminum 3 3 5 1a see page 3 1 1 13 1b see page 30 1b 1a 11 1 13 1c 1 1d 3 1 1 15 0 see page 35 3 5 1 Not used on some models. ti1a 3A011H For
More informationOPERATOR S MANUAL
OPERATOR S MANUAL 164622 INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 12-24-13 REVISED: 1-26-18 (REV: D) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 164631, 164633, 164635, 164637 and 161586
More informationHusky 1040 Air-Operated Diaphragm Pumps
Instructions - Parts List ACETAL, POLYPROPYLENE, AND PVDF Husky 040 Air-Operated Diaphragm Pumps 308443ZAD EN inch AODD pump for fluid transfer applications. For professional use only. Not approved to
More informationLow shear, low pulsation performance delivers superior finish quality
TRITON 3:1 irculating Pumps TRITON 13HP 23375 & 233751 TRITON 38HP 23385 & 233816 Low shear, low pulsation performance delivers superior finish quality FETURES ND ENEFITS Low pulsation output provides
More informationFixed Ratio Hydra-Cat First choice when quality counts.
11/16/98 1:38 PM Page 1-41 Fixed Ratio Hydra-Cat First choice when quality counts. Severe Duty lowers for increased wear resistance and durability PACKAGES 1-41 thru 1-46 Two- and three-lower designs provide
More informationHusky 515 and 716. Air-Operated Double Diaphragm Pumps GRACO SEALANT AND ADHESIVE EQUIPMENT PUMPS AND PACKAGES. Features and Benefits
GRO SELNT N HESIVE EQUIPMENT PUMPS N PKGES Husky 55 and 76 Features and enefits No sliding seals to leak or fail Quiet running less than 85 da with easy-to-use remote muffler capability for even lower
More informationINDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
More informationProcess Equipment. Air-Operated Pumps and Accessories for Process Industries
Process Equipment Air-Operated Pumps and Accessories for Process Industries Superior Pumping Technology The Most Durable Piston and Diaphragm Pumps! At Graco, we provide durable pumping solutions for your
More informationWARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.
13966-100-BP SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
More informationHusky 1050 Air-Operated Diaphragm Pump
Operation Husky 1050 Air-Operated Diaphragm Pump 312877A 1-inch pump with modular air valve for fluid transfer applications 125 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure 125 psi (0.86 MPa,
More informationHusky 1050 Air-Operated Diaphragm Pump
Operation Husky 1050 Air-Operated Diaphragm Pump 312877F ENG 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 3 for model information, including approvals.
More informationInstructions Parts List
Instructions Parts List ACETAL, POLYPROPYLENE, AND PVDF Husky040 Air-Operated Diaphragm Pumps 308443Z Acetal Model Shown 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 0 psi (0.8 MPa, 8 bar) Maximum
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationOPERATOR S MANUAL
OPERATOR S MANUAL 1604622 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-24-13 REVISED: 3-03-14 (REV. B) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
More informationInstructions Parts List
Instructions Parts List ACETAL Husky 515 Air Operated Dual Inlet Diaphragm Pump Used to evacuate and transfer fluids. 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum
More informationHusky 1050 Air-Operated Diaphragm Pump
Operation Husky 1050 Air-Operated Diaphragm Pump 312877L EN 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 4 for model information, including approvals.
More informationHusky 1050 Air-Operated Diaphragm Pump
Repair/Parts Husky 1050 Air-Operated Diaphragm Pump 313435Z EN 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 4 for model information, including
More informationInstructions Parts List
Instructions Parts List ALUMINUM Husky375 Air Operated Diaphragm Pump 308639E rev.j 0 psi (0.8 MPa, 8 bar) Maximum Incoming Air Pressure 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure * Part No.
More informationHusky 715 Air-Operated Diaphragm Pumps
INSTRUCTIONS PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 308 444 Rev. R Supersedes Rev. P ACETAL AND
More informationInstructions Parts List
Instructions Parts List ACETAL, POLYPROPYLENE, AND KYNAR Husky040 Air-Operated Diaphragm Pumps 308443Y Acetal Model Shown 20 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 20 psi (0.8 MPa, 8 bar)
More informationOPERATOR S MANUAL A
OPERATOR S MANUAL 670144-A INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-18-15 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) (REV: A) 67 0144-A READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationHIGH PURITY PTFE AIR DIAPHRAGM PUMPS
HIGH PURITY PTFE AIR DIAPHRAGM PUMPS HIGH PURITY MACHINED PTFE PUMPS PTFE PUMPS Machined PTFE Design NPT/BSP or ANSI/DIN Flange Connections 1/4, 3/8, 1/2, 1, 1-1/2, 2 Inch Sizes Available Max Temperature
More informationHusky 1050 Air-Operated Diaphragm Pump
Repair/Parts Husky 1050 Air-Operated Diaphragm Pump 313435L ENG 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 3 for model information, including
More informationInstructions Parts List
Instructions Parts List POLYPROPYLENE AND PVDF Husky 50 Air-Operated Diaphragm Pumps 08550Z4 See Models on page for a list of pump models and descriptions. 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST A025-SQ*-****-*** BOX PLASTIC 16 PARTS LIST - BOX PLASTIC A025-SQ*-****-*** 1 LEFT MANIFOLD 1 A025-SQP-****-*** 10503-40 Polypropylene A025-SQY-****-*** 10503-46 Conductive
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationHusky Sanitary Series FDA-Compliant Diaphragm Pump
Instructions/Parts List Husky Sanitary Series FDA-Compliant Diaphragm Pump 30958K 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 0 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure Important Safety
More informationHusky 3300 Air-Operated Diaphragm Pump
Operation Husky 3300 Air-Operated iaphragm Pump 3A0410A EN Heavy-duty 3-inch pump with large flow paths for fluid transfer applications, including high-viscosity materials. For professional use only. See
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationIndustrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationAIR OPERATED DOUBLE DIAPHRAGM PUMP
DF5 Metallic pumps 3 For fluid transfer and distribution systems. 5 l/min, 14 US gpm 1/2 fluid port. Very robust construction, the pump is fully enclosed in an aluminum shield. Lubricants, waste oil, antifreeze,
More informationProcess Equipment. Pumping Solutions for Process Industries. Springer Pumps, LLC. Tel: Fax:
Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky 1050e Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency and
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationProcess Equipment. Pumping Solutions for Process Industries
Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky Electric Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationHusky 3300 Air-Operated Diaphragm Pump
Repair/Parts Husky 3300 Air-Operated Diaphragm Pump 3A04F EN Heavy-duty 3-inch pump with large flow paths for fluid transfer applications, including high-viscosity materials. For professional use only.
More informationSANITARY EQUIPMENT BUYER S GUIDE
SANITARY EQUIPMENT BUYER S GUIDE Sanitary equipment for unloading direct from original shipping containers PROCESS EQUIPMENT PROVEN QUALITY. LEADING TECHNOLOGY. Table of Contents Sanitary Pumps Selection
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationInstructions Parts List
Instructions Parts List POLYPROPYLENE AND POLY VINYLIDENE FLUORIDE Husky 50 Air-Operated Diaphragm Pumps 08550Z 0 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 0 psi (0.8 MPa, 8 bar) Maximum Air
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationherkules 338 Air Operated Diaphragm Pump
Instructions Parts List herkules 8 Air Operated Diaphragm Pump 00 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 00 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure 09668H Model No. 49 Acetal Pump,
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationBellows Pumps. The Newest Technology in Piston Pumps
Bellows Pumps The Newest Technology in Piston Pumps Merkur Bellows The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive
More informationD/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
More informationPUMP OPERATIONS & MAINTENANCE MANUAL
PUMP OPERATIONS & MAINTENANCE MANUAL A150-1-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX 4-6 SECTION 3 PRINCIPLES
More informationHusky 205 Air Operated Diaphragm Pumps
Instructions Parts List Husky 205 Air Operated Diaphragm Pumps 308652ZAC 00 psi (0.7 MPa, 7 bar) Maximum Incoming Air Pressure 00 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure Important Safety Instructions.
More informationHusky TM 2150 Air-Operated Diaphragm Pumps
Instructions Parts List ALUMINUM, STAINLESS, AND DUCTILE IRON Husky TM 50 Air-Operated Diaphragm Pumps 0868ZAM EN -inch AODD pump for fluid transfer applications. For professional use only. See Models
More informationWARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.
13966-300-BM SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
More informationG66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
More informationSERVICE KITS PUMP DATA INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: XX-XXX-C. Figure 1. RELEASED 13/Nov/ :24:02 GMT
OPERATOR S MANUAL 66610X-X-C INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 8-24-89 REVISED: 10-26-18 (REV: AK) 1 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationAir Operated Diaphragm Pumps
Instructions Air Operated Diaphragm Pumps 30898ZAC For fluid transfer applications. For professional use only. Only models marked with (*) are approved for use in European explosive atmosphere locations.
More information6-7/16" (164 mm) 6" (152 mm) Torque in. lbs. 4-7/8" (124 mm)
Gemini / Diaphragm Pumps Max. Flow Pump #88830 (SS), #8883 (Polypro), #88833 (Polypro), #88836 (Acetal), #88837 (Alum), #8883 (Acetal), #88834 (SS), #88835 (Polypro), #88838 (Alum) /" NPT (F) Fluid Outlet
More information3/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
OPERATOR S MANUAL PD07P-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 11-30-06 REVISED: (REV. 01) 3/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationAIR OPERATED OIL PUMPS AND KITS
PM 2 PumpMaster 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. Model 24 PumpMaster 2, : ratio stub
More informationThe industry standard in lubrication equipment for outstanding performance and reliability LUBRICATION PROVEN QUALITY. LEADING TECHNOLOGY.
FIRE-BALL PUMPS The industry standard in lubrication equipment for outstanding performance and reliability LUBRICATION PROVEN QUALITY. LEADING TECHNOLOGY. The Industry s Most Trusted Piston Pump Unmatched
More informationA measured step forward
A measured step forward Operations & Maintenance Manual TM AODD 1/2 Air Operated Double Diaphragm Pump 2 Phone: (585) 426-0990 www.lutzjescoamerica.com Fax: (585) 426-4025 Contents Cautions Read First!...4
More informationEXPERT SERIES AIR OPERATED DIAPHRAGM PUMPS 1/4 THROUGH 3 FLUID PORTS
EXPERT SERIES AIR OPERATED DIAPHRAGM PUMPS 1/4 THROUGH 3 FLUID PORTS ARO Air Operated Diaphragm Pumps With proven performance in the field and backed by an industry leading 5-year warranty, ARO air operated
More informationINSTRUCTIONS-PARTS LIST
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 308479 Rev. W ALUMINUM AND STAINLESS STEEL Husky
More informationHusky 1050 Air-Operated Diaphragm Pump
Repair/Parts Husky 1050 Air-Operated Diaphragm Pump 145A 1-inch pump with modular air valve for fluid transfer applications 15 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure 15 psi (0.86 MPa, 8.6
More informationH25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
More informationOPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED. A JDA Global Company
OPERATION MANUAL 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air
More informationOPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS
OPERATION MANUAL 3 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ
More informationHusky 205 Air-Operated Diaphragm Pumps
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 308652 Rev. H Husky 205 Air-Operated Diaphragm
More informationHusky 2150 Air Operated Diaphragm Pumps
Instructions Parts List ALUMINUM, STAINLESS, AND DUCTILE IRON Husky50 Air Operated Diaphragm Pumps 308368ZAC inch AODD pump for fluid transfer applications. For professional use only. See Models on page
More information3/4" DIAPHRAGM PUMP SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART PD07R - X A S - X X X
OPERATOR S MANUAL PD07X-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 2-20-07 REVISED: 5-21-10 (REV. 04) 3/4" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationInstructions Parts List
Instructions Parts List ACETAL AND POLYPROPYLENE Husky 307 Air Operated Diaphragm Pumps 00 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 00 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure 308553AB
More informationHusky 1050 Air-Operated Diaphragm Pump
Repair/Parts Husky 1050 Air-Operated Diaphragm Pump 313435E ENG 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 3 for model information, including
More informationSingle Component Pumps and Packages Applicators Accessories
Single Component Pumps and Packages Applicators Accessories Buyer s Guide and Specifications Sealant and Adhesive Solutions for Industrial and Automotive Applications PROVEN QUALITY. LEADING TECHNOLOGY.
More informationWarm Melt Supply Systems. For warm melt materials and temperature conditioning applications
Warm Melt Supply Systems For warm melt materials and temperature conditioning applications Advanced Technology with a Modular Approach Precision temperature control Designed specifically for warm melt
More information