MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP
|
|
- Meghan Lloyd
- 6 years ago
- Views:
Transcription
1 MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP Number of Plungers... 5 Maximum Rated Speed rpm Stroke Length inches 127 mm Maximum Rated Power hp 224 kw Maximum Rod Load 300M, 300L, 300H... 10,700 lbs kn 300M-HD, 300L-HD, 300H-HD... 12,125 lbs kn Weight 300M, 300M-HD...4,925 lbs. 300L...5,000 lbs. 300L-HD...5,050 lbs. ENGLISH UNITS MA-300M hp rpm MA-300M kw rpm
2 ENGLISH UNITS MA-300L hp rpm MA-300L kw rpm ENGLISH UNITS MA-300M-HD hp rpm MA-300M-HD kw rpm
3 ENGLISH UNITS MA-300L-HD hp rpm MA-300L-HD kw rpm ENGLISH UNITS MA-300H hp rpm MA-300H kw rpm ENGLISH UNITS MA-300H-HD hp rpm MA-300H-HD kw rpm *Displacement based on 100% Volumetric Efficiency Power based on 90% Mechanical Efficiency Ihp = Pump rpm = USGPM x (Discharge psig - 1/2 Suction psig) M 3 /HR x (Discharge Bar - 1/2 SuctionBar) IkW = USGPM Desired M 3 /HR Desired Pump rpm = USGPM per Revolution of Selected Plunger M 3 per Revolution of Selected Plunger
4 MA-300M and MA-300M-HD Quintuplex Pump (Measurements shown in inches) OIL PRESSURE SET VALVE 58-5/8 LUBE OIL FILTER OIL PRESSURE GAUGE 1-1/ /2 2-3/ /8 1-3/8 DIA. HOLE FOUR PLACES C L CRANKSHAFT 34 NOTE REQUIRED DIRECTION OF ROTATION 1x1x7 KEY Ø /2 MA-300 SERIES FOUNDATION PLAN 2-3/4 TYP. 5-1/2 DISCHARGE CONNECTIONS 3 ANSI 1500# LF 22-5/ /4 5-3/4 22-1/2 SUCTION CONNECTIONS 6 ANSI 150# FF 45 MA-300L and MA-300L-HD Quintuplex Pump (Measurements shown in inches) 60-3/8 OIL PRESSURE SET VALVE LUBE OIL FILTER OIL PRESSURE GAUGE 62-1/8 1x1x7 KEY NOTE REQUIRED DIRECTION OF ROTATION Ø DISCHARGE CONNECTIONS 4 ANSI 600# FF 22-7/8 10-1/4 12-1/2 4-1/2 22-1/2 SUCTION CONNECTIONS 8 ANSI 150# FF 45 All drawings and specifications subject to change without notice.
5 MA-300H and MA-300H-HD Quintuplex Pump (Measurements shown in inches) OIL PRESSURE SET VALVE OIL PRESSURE GAUGE Ø1.38 (1 3/8) 4 HOLES REQD. TO REMOVE OIL FILTER C L CRANKSHAFT TYP " x 1" x 7" KEY FOUNDATION PLAN Ø DISCHARGE CONNECTIONS 2" ANSI 2500#RF LUBE OIL FILTER (OPPOSITE SIDE) /4"NPTF CRADLE DRAIN SUCTION CONNECTIONS 6" ANSI 150#RF All drawings and specifications subject to change without notice.
6 ENGINEERING DATA MA-300M, MA-300L, MA-300H, MA-300M-HD, MA-300L-HD and MA-300H-HD Quintuplex Pump POWER END ENGINEERING DATA Maximum Input Speed 300M, 300L, 400 rpm 300M-HD, 300L-HD, 400 rpm Rated Continuous Plunger Load 300M, 300L... 10,700 lbs. 300M-HD, 300L-HD... 12,125 lbs. Maximum Rated Continuous Speed rpm Normal Continuous Speed Range to 400 rpm Minimum Speed rpm Oil Capacity...66 U.S. Qts Power End Oiling System... Pressure Lubrication System Power Frame, One-Piece...Cast Iron Crosshead, Full Cylindrical...Cast Iron Crosshead, Diameter x Length...5-3/4 x 6-3/16 in. Crankshaft...Ductile Iron Crankshaft Diameters: At Tapered Roller Bearings...4-3/4 in. At Crankpin Bearings, Diameter x Length...4-1/2 x 3-3/4 in. Crosshead (Wrist) Pin, Case-Hardened and Ground... AISI 8620 Main Bearings, Tapered Roller...Timken Crankpin Bearings, Precision Automotive...Steel Backed, Babbitt-Lined Extension (Pony) Rod, Integral with Plungers PH S.ST. Connecting Rod, Automotive Type...Ductile Iron Average Crosshead 450 rpm fpm Minimum Life Expectancy, Main Bearings, L ,000+ hr. LIQUID END ENGINEERING DATA Maximum Continuous Working Pressure 300M... 3,600 psi 300L... 1,480 psi 300H... 6,000 psi 300M-HD... 5,041 psi 300L-HD... 1,715 psi 300H-HD... 6,861 psi Hydrostatic Test 300M, 300M-HD... 5,558 psi 300L, 300L-HD... 2,220 psi Available Liquid End Materials, ASTM: Nickel Aluminum Bronze Casting...B148-C955 Carbon Steel Block... A105 Stainless Steel Block...Various Grades Plunger Type Rokide (Chromium Oxide-Coated) S.ST. Stuffing Boxes, Field-Removable and Replaceable...Nickel, Aluminum, Bronze; Optional Carbon Steel Packing Types Available: Gland-Loaded, Non-Adjustable...Style 838 Spring-Loaded, Braided PTFE Coating & Aramid Fiber...Style 140 Spring-Loaded, Cup-Type...Style 120X Spring-Loaded, Garlock... Style 8921K Valve Cover and Cylinder Head Plugs S.ST. Retainer Plates, Ductile Iron, ASTM...A Seals, Stuffing Boxes, Valve Covers, Cylinder Heads...Buna-N Disc Valve Types: Regularly Furnished, Acetal Resin... Acetal Optional, Hardened and Lapped PH S.ST. Valve Spring Material...Inconel Valve Seat, Liquid Passage Area 300M, 300M-HD sq. in. 300L, 300L-HD sq. in. 300H, 300H-HD sq. in. Average Liquid 400 rpm: Through Valves 300M, 300M-HD fps 300L, 300L-HD fps 300H, 300H-HD fps Through Suction Manifold 300M, 300M-HD fps 300L, 300L-HD fps 300H, 300H-HD fps Through Discharge Manifold 300M, 300M-HD fps 300L, 300L-HD fps 300H, 300H-HD fps All drawings and specifications subject to change without notice.
7 THIS PAGE INTENTIONALLY LEFT BLANK
8 1101 MYERS PARKWAY, 490 PINEBUSH ROAD, UNIT 4, ASHLAND, OHIO CAMBRIDGE, ONTARIO N1T 0A5 Inconel is a registered trademark of the Special Metals family of companies. Timken is a registered trademark of The Timken Company. Rokide is a registered trademark of Saint-Gobain Abrasives, Inc. Myers is a registered trademark of Pentair Ltd. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. MA /23/ Pentair plc All Rights Reserved.
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationMA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
More informationMODELS TRIPLEX PUMPS MA-95L, MA-95M, MA-120L, MA-120L-HD, MA-120M, MA-120M-HD, SC-170, SC-170L, SC-170H, AND SC-170DD INSTALLATION AND SERVICE MANUAL
MODELS MA-9L, MA-9M, MA-0L, MA-0L-HD, MA-0M, MA-0M-HD, SC-70, SC-70L, SC-70H, AND SC-70DD TRIPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual
More informationMA-45M, MA-75L, MA-75M, MA-75H, SC-80, SC-80H, SC-115L, SC-115, SC-115H
MODELS MA-M, MA-7L, MA-7M, MA-7H, SC-80, SC-80H, SC-L, SC-, SC-H QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 INSTALLATION AND SERVICE MANUAL
MODELS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, AND SC-300 INSTALLATION AND SERVICE MANUAL
MODELS MA-40L, MA-40L-HD, MA-40M, MA-40M-HD, MA-40K, SC-300L, AND SC-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationAppendix B Specifications for Vertical Single-Acting Models
Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections
More informationMODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL
MODELS CX0 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationMYERS MODELS 4RC AND 4RCX
3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids
More informationSC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL
SC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system.
More informationMODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL
MODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationModel T10 Triplex Power Pump
Weatherford s Model T10 is a single-acting triplex plunger pump rated at 10 HP in continuous duty service and up to 16 HP in intermittent duty. This versatile pump is offered with a variety of material
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationModel T5 Triplex Power Pump
Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous-duty service and up to 8 HP in intermittent duty. This versatile pump is offered with a variety of material and
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationCalle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationPUMPS & FLUID ENDS. THE UNx ADVANTAGE UP TO 15,000 PSI (1000 BAR) FEATURES AND BENEFITS
THE UNx ADVANTAGE FEATURES AND BENEFITS Through nearly twenty years of service, the Jetstream UNx Fluid End has remained the most efficient, easy-to-use, and versatile waterblast tool available. Standard
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationModel T25 Triplex Power Pump
weatherford Model t25 triplex power pump Model T25 Triplex Power Pump Pump and Fluid Systems Weatherford s Model T25 is a single-acting, triplex plunger pump rated at 23 HP in continuous duty service and
More informationNOTE! To the installer: Please make sure you provide this manual to the owner of the equipment or to the responsible party who maintains the system.
CMP SERIES CPM5-5B (25905F00) CPM5-5B-H/D (25905F0) CPM8-5B (25905F0) CPM8-5B-H/D (25905F0) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please make sure you
More informationseries2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION
TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger
More informationINSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST
CMP SERIES CPM15-15B (25905F300) CPM15-15B-H/D (25905F301) CPM18-15B (25905F303) CPM18-15B-H/D (25905F304) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please
More informationMYERS S Series 4" Submersible Pumps
The S Series 4 submersibles have been a successful entry in the Myers well pump line for many years and have a history of tremendous reliability. The all stainless steel construction is ideal for extreme
More informationCPM SERIES INDUSTRIAL PUMPS
MODELS CPM18-40 AND CPM24-30 CPM SERIES INDUSTRIAL PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationBARESHAFT PUMP. UNx FEATURES AND BENEFITS. Pump & Fluid Ends 40,000 PSI
UNx BARESHAFT PUMP FEATURES AND BENEFITS The Jetstream 40,000 psi UNx Bareshaft Pump provides unrivaled durability and strength. The pump is capable of power inputs up to 325 horsepower and, coupled with
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationFrame and Running Gear Data: CVIP. A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP. Stroke (in.) Rod Diameter (in.)
Frame and Running Gear Data: CVIP I. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 4C-VIP 5C-VIP 6C-VIP 1.0 General Stroke (in.) 4.0 5.0 6.0 Rod Diameter (in.) 2.0 2.0 2.0 Maximum
More informationA-C Fire Pump Systems FP 2.4 Page 1
ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi
More informationHD and HDL Single-Stage Non-Lube Gas Compressors
COMPRESSORS CB-324 2013/05 Ethylene Ethylene Oxide HCFC s Helium n-heptane n-hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene
More informationFMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.
FMC BEAN FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets. WATER esigned for continuous duty applications, the FMC Technologies Bean piston line increases drilling
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationMA-60M TRIPLEX. All drawings and specifications subject to change without notice.
1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA (CONTINUED)... 5 GENERAL ENGINEERING DATA... 5 PUMP NAME PLATE... 6 PUMP CROSS-SECTION...
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD
More informationRO-358L QUINTUPLEX REVISED
1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA (CONTINUED)... 5 GENERAL ENGINEERING DATA... 5 PUMP NAME PLATE... 6 PUMP CROSS-SECTION...
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationVIKING. Series LVP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA Section 445 Page Issue C
VIKING Section 445 Page 445.1 Issue C PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping
More informationD U P A G R O. C O M SC-45 TRIPLEX
Dupagro B.V. Ooststeeg 102 Phone +31 (0) 317840197 6708 AX Wageningen info@dupagro.com The Netherlands www.dupagro.com 1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA...
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationModel T5 Triplex Power Pump
weatherford Model t5 triplex power pump Pump and Fluid Systems Model T5 Triplex Power Pump Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous duty service and up
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationE SERIES RECIPROCATING PUMP INSTALLATION AND SERVICE MANUAL
E SERIES RECIPROCATING PUMP INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationFrame and Running Gear Data: MOS
Frame and Running Gear Data: MOS 1. STANDARD FRAME AND RUNNING GEAR ASSEMBLIES A. Performance Characteristics 5MOS 6MOS 7MOS 1.0 General - Stroke (in) 5.0 6.0 7.0 Rod Diameter (in) 2.25 2.25 2.25 Max.
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
More informationD-VIP. compressors. With several unique features, the D-VIP compressor is one of. the most versatile compressors. available today.
D D-VIP compressors With several unique features, the D-VIP compressor is one of the most versatile compressors available today. Dresser-Rand s D-VIP compressor uses unique design features of both the
More informationThe SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationD U P A G R O. C O M SC-65L TRIPLEX
Dupagro B.V. Ooststeeg 102 Phone +31 (0) 317840197 6708 AX Wageningen info@dupagro.com The Netherlands www.dupagro.com 1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA...
More informationCALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationHusky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationF-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationTABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More information5020 Series Injector
5.2018.9.k 1 5020 Series Injector 1 2 3 4 5 6 10 11 7 12 13 8 2 14 Parts List 15 16 17 Item # Part # # Reqd. Description Material Alternate Part # 1 A-1854 1 0-12 PSI Pressure Gauge A-1295SS 2 A-0022 1
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationModel T10 Triplex Power Pump
weatherford Model t10 triplex power pump Pump and Fluid Systems Model T10 Triplex Power Pump Weatherford s Model T10 is a single-acting, triplex plunger pump rated at 10 HP in continuous duty service and
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More informationYarway Hy-Drop Throttling valve
YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationDP SERIES INDUSTRIAL PUMP INSTALLATION AND SERVICE MANUAL
DP SERIES INDUSTRIAL PUMP INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system.
More informationST.E.P. Plus D Series 4" multi-stage submersible effluent pumps
The 4 sub mersible pump in 1, 2 and 3 GPM models dominate with superior draw-down capability, with reduced amp draw and with cooler and quieter operation. ORDERING INFORMATION Catalog Number HP Max. Load
More information