MA-40M(L)(H) TRIPLEX PLUNGER PUMP
|
|
- Patience Griffin
- 6 years ago
- Views:
Transcription
1 MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed rpm Stroke Length in mm Maximum Rated Power hp 29.8 kw Maximum Rod Load lbs kn Weight MA-40M lbs. MA-40L lbs. MA-40H lbs. ENGLISH UNITS MA-40M PLUNGER SIZE in. STUFFING BOX BORE in. MAX psi *GALLON PER/REV. 200 rpm US GPM 250 rpm US GPM 350 rpm US GPM 450 rpm US GPM 550 rpm US GPM hp rpm METRIC UNITS PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR *LITER PER/REV. 200 rpm LPM 250 rpm LPM 350 rpm LPM 450 rpm LPM 550 rpm LPM kw rpm ENGLISH UNITS MA-40M PLUNGER SIZE in. STUFFING BOX BORE in. MAX psi *GALLON PER/REV. 200 rpm US GPM 250 rpm US GPM 350 rpm US GPM 450 rpm US GPM 550 rpm US GPM hp rpm METRIC UNITS PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR * LITER PER/REV. 200 rpm LPM 250 rpm LPM 350 rpm LPM 450 rpm LPM 550 rpm LPM kw rpm MA-40L MA-40L
2 ENGLISH UNITS PLUNGER SIZE IN. STUFFING BOX BORE IN. MAX psi. *GALLON PER/REV. 200 rpm US GPM 250 rpm US GPM 350 rpm US GPM 450 rpm US GPM 550 rpm US GPM hp rpm METRIC UNITS PLUNGER SIZE mm STUFFING BOX BORE mm MAX PRESS. BAR * LITER PER/REV. 250 rpm LPM 250 rpm LPM 350 rpm LPM 450 rpm LPM 550 rpm LPM kw rpm MA-40H MA-40H *Displacement based on 100% Volumetric Efficiency Power based on 90% Mechanical Efficiency Ihp = Pump rpm = USGPM x (Discharge psig - 1/2 Suction psig) M 3 /HR x (Discharge Bar - 1/2 SuctionBar) IkW = USGPM Desired M 3 /HR Desired Pump rpm = USGPM per Revolution of Selected Plunger M 3 per Revolution of Selected Plunger
3 MA-40M Triplex Pump /4 16-1/4 6-1/4 R.H. DRIVE SHOWN 5/8 x 5/8 x 5-1/2 KEY DIA. 36-3/4 11/16 DIA. HOLE FOUR PLACES /4 CRANKSHAFT /4 1-1/2 3 3 DISCHARGE CONNECTIONS (3) FOUNDATION PLAN 2 TYP. 3/4 TYP. 7-3/4 7-3/4 6-1/2 14-1/4 3/8 NPT 1/4 SUCTION CONNECTION 2-1/2 NPT 36-3/4 DISCHARGE CONNECTIONS 7-3/4 7-3/4 6-1/2 8-3/4 2-1/8 SUCTION CONNECTIONS 2 NPT 36-3/4 DISCHARGE CONNECTIONS 1-1/2 ANSI 600# RF 22-1/2 6-1/2 1-3/8 8-3/4 2-1/8 SUCTION CONNECTION 2-1/2 ANSI 150# RF 22-1/2
4 MA-40L Triplex Pump DIA ACCESSORY DRIVE EXTENSION 6-1/4 16-1/4 28-1/4 12 R.H. DRIVE SHOWN /8 x 5/8 x 5-1/2 KEY DIA. 1-1/4 5-1/4 35-5/8 25-7/8 16-3/4 15-1/ /2 11 9/ /4 24-3/4 3/8 PLUG 3/4 TYP. 1-1/4 NPT AT CENTER 10-15/16 6-3/4 37-1/4 25-7/8 2 NPT 16-3/4-3/16 1-3/16 2-1/8 2-1/2 3 NPT
5 MA-40H Triplex Pump 5/8 x 5/8 x 5-1/2 KEY DIA. 35-1/4 6-7/8 2-3/4 1 NPT 6-7/ /4 24-3/4 3/8 PLUG 35-1/4 3/4 TYP. 1-1/4 NPT AT CENTER 3-1/8 2-3/4 24-1/2 14-5/8 3-1/ /8 16-1/4 6-1/4 3-1/4 28-1/ /8 4 22
6 ENGINEERING DATA MA-40M, MA-40L and MA-40H Triplex Pumps POWER END ENGINEERING DATA Max. Input Speed 40M rpm 40L, 40H rpm Rated Continuous Plunger Load... 3,456 lbs. Max. Rated Continuous Speed rpm Normal Continuous Speed Range 40M, 40H to 500 rpm Normal Continuous Speed Range 40L to 450 rpm Minimum Speed rpm Oil Capacity 40M...5 U.S. Qts 40L, 40H...8 U.S. Qts Power End Oiling System... Splash & Scoop Power Frame, One-Piece...Cast Iron Crosshead, Full Cylindrical...Cast Iron Dia. x Length...4 x 4-1/2 in. Crankshaft...Ductile Iron Crankshaft Diameters: At Tapered Roller Bearings 40M in. 40L /2 in. 40H /4 in. At Crankpin Bearings, Dia. x Length...2-3/4 x 2 in. Crosshead (Wrist) Pin, Case-Hardened and Ground...AISI 8620 Wrist Pin Bushing, SAE 660, Dia. x Width...1-5/16 x 2 in. Main Bearings, Tapered Roller...Timken Crankpin Bearings, Precision Automotive...Steel Backed, Babbitt-Lined Extension (Pony) Rod, Integral w/ Plungers S.ST. Connecting Rod, Automotive Type...Ductile Iron Average Crosshead 550 rpm fpm Minimum Life Expectancy, Main Bearings, L ,000+ hr. LIQUID END ENGINEERING DATA Max. Continuous Working Pressure 40M... 3,000 psi 40L psi 40H... 5,000 psi Hydrostatic Test 40M... 4,500 psi 40L... 1,0 psi 40H... 7,500 psi Available Liquid End Materials, A.S.T.M. Nickel Aluminum Bronze Casting...B148-C955 Carbon Steel Block 40M, 40L... A516 Gr. 70 or A105 Stainless Steel Block 40M, 40L...Various Grades Ductile Iron Casting 40M, 40L...A Stainless Steel Block 40H PH Forged Steel Block 40H or A105 Plunger Type Rokide (Chromium Oxide-Coated) S.ST. Stuffing Boxes, Field-Removable and Replaceable Carbon Steel 40L, 40H Stainless Steel, Hardened 40H PH Stuffing Boxes, Field-Removable and Replaceable... Stainless Steel Packing Types Available Gland-Loaded, Non-Adjustable 40M, 40L...Style 838 Spring-Loaded, Braided PTFE Coating & Aramid Fiber...Style 140 Spring-Loaded, Cup-Type...Style 120X Spring-Loaded, Garlock 40M, 40L...Style 8921K Valve Cover and Cyl. Head Plugs 40M S.ST. 40H S.ST. Retainer Plates, Ductile Iron, A.S.T.M. 40M, 40L...A H...A36 Seals, Stuffing Boxes, Valve Covers, Cyl. Heads...Buna-N Valve Types Standard, Acetal Resin 40M, 40L... Acetal Optional, Hardened and Lapped 40M, 40L...-4 PH S.ST. Dual Stem Guided 40M, 40L...-4 PH S.ST. Disc Valves 40H PH Valve Spring Material...Inconel Valve Seat, Liquid Passage Areas Plate (Disc) Valves, (Acetal or S.ST.) 40M sq.in. 40L sq.in. 40H sq.in. Dual Stem Guided Valves 40M sq.in. Avg. Liquid 550 rpm through Disc Valves 40M fps 40L fps 40H fps through Dual Stem Guided Valves 40M fps 40L fps through Suction Manifold 40M fps 40L fps 40H fps through Discharge Manifold 40M fps 40L fps 40H fps All drawings and specifications subject to change without notice.
7 MA-40M Triplex Pump 43 APPROX. S (3) 15-1/2 ACCESSORY DRIVE EXTENSION /2 14-3/8 1-1/4 NPT -1/4 LC / /2 2-1/2 NPT 51 APPROX. 1-1/2 DIA. TACHOMETER HOLE DISCHARGE CONNECTIONS 1-1/2 ANSI 600# RF 22-1/2 DISCHARGE LC 8-3/4 LC SUCTION 18-1/2 SUCTION CONNECTIONS 2-1/2 ANSI 150# RF 1-1/4 NPT 14-1/8 20-3/8 40-1/4 50-1/2 3-3/8-1/4 22-1/2 28 MA-40L Triplex Pump 43-1/4 15-1/4 7/8 14-3/8 5/8 DRILL FOUR HOLES BOTTOM FLANGES 31-1/ / /2 DIA. TACHOMETER HOLE 25-7/8 2 NPT 3 NPT -1/ LC LC All drawings and specifications subject to change without notice /16 9-1/8 ACCESSORY DRIVE EXTENSION
8 MA-40H Triplex Pump 43 APPROX. 1 NPT ACCESSORY DRIVE EXTENSION 14-1/2 7/8 14-3/8 5/8 DRILL FOUR HOLES BOTTOM FLANGES 31-1/ /4 43-7/8 1-1/2 DIA. TACHOMETER HOLE 1-1/4 NPT -1/4 LC /4 11-3/16 43 APPROX. 1-1/2 DIA. TACHOMETER HOLE 1 ANSI 2500# RF 15-1/2 7-1/4 ACCESSORY DRIVE EXTENSION 14-1/2 1-1/2 ANSI 150# RF 11-3/16 7/8 14-3/8 5/8 DRILL FOUR HOLES BOTTOM FLANGES 31-1/ /4 44-1/4 1-1/4 NPT -1/ LC 1101 MYERS PARKWAY, 490 PINEBUSH ROAD, UNIT 4, ASHLAND, OHIO CAMBRIDGE, ONTARIO N1T 0A5 Inconel is a registered trademark of the Special Metals family of companies. Timken is a registered trademark of The Timken Company. Rokide is a registered trademark of Saint-Gobain Abrasives, Inc. Myers is a registered trademark of Pentair. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. MA /21/ 20 Pentair plc All Rights Reserved.
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
More informationMA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP
MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP Number of Plungers... 5 Maximum Rated Speed...400 rpm Stroke Length...5.00 inches 127 mm Maximum Rated Power...300.0 hp 224 kw Maximum Rod Load 300M,
More informationMA-45M, MA-75L, MA-75M, MA-75H, SC-80, SC-80H, SC-115L, SC-115, SC-115H
MODELS MA-M, MA-7L, MA-7M, MA-7H, SC-80, SC-80H, SC-L, SC-, SC-H QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip
More informationMODELS TRIPLEX PUMPS MA-95L, MA-95M, MA-120L, MA-120L-HD, MA-120M, MA-120M-HD, SC-170, SC-170L, SC-170H, AND SC-170DD INSTALLATION AND SERVICE MANUAL
MODELS MA-9L, MA-9M, MA-0L, MA-0L-HD, MA-0M, MA-0M-HD, SC-70, SC-70L, SC-70H, AND SC-70DD TRIPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 INSTALLATION AND SERVICE MANUAL
MODELS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, SC-300, RO-358L AND RO-358 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this
More informationMODELS QUINTUPLEX PUMPS MA-240L, MA-240L-HD, MA-240M, MA-240M-HD, MA-240K, SC-300L, AND SC-300 INSTALLATION AND SERVICE MANUAL
MODELS MA-40L, MA-40L-HD, MA-40M, MA-40M-HD, MA-40K, SC-300L, AND SC-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationAppendix B Specifications for Vertical Single-Acting Models
Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationMODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL
MODELS CX0 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationModel T10 Triplex Power Pump
Weatherford s Model T10 is a single-acting triplex plunger pump rated at 10 HP in continuous duty service and up to 16 HP in intermittent duty. This versatile pump is offered with a variety of material
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationTABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationModel T25 Triplex Power Pump
weatherford Model t25 triplex power pump Model T25 Triplex Power Pump Pump and Fluid Systems Weatherford s Model T25 is a single-acting, triplex plunger pump rated at 23 HP in continuous duty service and
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationModel T5 Triplex Power Pump
Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous-duty service and up to 8 HP in intermittent duty. This versatile pump is offered with a variety of material and
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationMYERS MODELS 4RC AND 4RCX
3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationFMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.
FMC BEAN FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets. WATER esigned for continuous duty applications, the FMC Technologies Bean piston line increases drilling
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationSC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL
SC-35 TRIPLEX PUMP INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system.
More informationBARESHAFT PUMP. UNx FEATURES AND BENEFITS. Pump & Fluid Ends 40,000 PSI
UNx BARESHAFT PUMP FEATURES AND BENEFITS The Jetstream 40,000 psi UNx Bareshaft Pump provides unrivaled durability and strength. The pump is capable of power inputs up to 325 horsepower and, coupled with
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationHusky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationF-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
More informationNOTE! To the installer: Please make sure you provide this manual to the owner of the equipment or to the responsible party who maintains the system.
CMP SERIES CPM5-5B (25905F00) CPM5-5B-H/D (25905F0) CPM8-5B (25905F0) CPM8-5B-H/D (25905F0) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please make sure you
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationMYERS S Series 4" Submersible Pumps
The S Series 4 submersibles have been a successful entry in the Myers well pump line for many years and have a history of tremendous reliability. The all stainless steel construction is ideal for extreme
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationPOMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO
POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO DIAPHRAGM PUMP Hydra-Cell Features Heavy-duty industrial construction Quiet, smooth operation Hydraulically balanced diaphragms Runs dry without damage Positive
More informationMODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL
MODEL MA-300 QUINTUPLEX PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationFMC Technologies Pumps are manufactured to ISO-9001 standards at its state-of-the-art facility in Stephenville, Texas.
FMC Technologies Pumps are manufactured to ISO-9001 standards at its state-of-the-art facility in Stephenville, Texas. FMC Technologies reciprocating pumps have provided exceptional performance and value
More information2016 Catalog PUMPS ACCESSORIES CUSTOM UNITS. Performance Under Pressure
2016 Catalog PUMPS ACCESSORIES CUSTOM UNITS Performance Under Pressure Giant Pumps TABLE OF CONTENTS Page Pump Quick Reference Chart...4-5 Consumer Pumps (GXR, GX2525)...6-7 P200 Series...9-13 P300 Series...14-18
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationModel T10 Triplex Power Pump
weatherford Model t10 triplex power pump Pump and Fluid Systems Model T10 Triplex Power Pump Weatherford s Model T10 is a single-acting, triplex plunger pump rated at 10 HP in continuous duty service and
More informationPUMPS & FLUID ENDS. THE UNx ADVANTAGE UP TO 15,000 PSI (1000 BAR) FEATURES AND BENEFITS
THE UNx ADVANTAGE FEATURES AND BENEFITS Through nearly twenty years of service, the Jetstream UNx Fluid End has remained the most efficient, easy-to-use, and versatile waterblast tool available. Standard
More informationModel T5 Triplex Power Pump
weatherford Model t5 triplex power pump Pump and Fluid Systems Model T5 Triplex Power Pump Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous duty service and up
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More informationseries2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION
TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationMud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
More information3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationCompressor Recording Data Book
Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com
More informationCalle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationVIKING. Series LVP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA Section 445 Page Issue C
VIKING Section 445 Page 445.1 Issue C PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationCPM SERIES INDUSTRIAL PUMPS
MODELS CPM18-40 AND CPM24-30 CPM SERIES INDUSTRIAL PUMPS INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationGoulds High-Pressure Multi-Stage Pumps
Goulds 3311 High-Pressure Multi-Stage Pumps Goulds Model 3311 Multistage Pumps Designed for a Wide Range of High Pressure Services Goulds Model 3311 is a radial split, segmented ring multistage pump...
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationYarway Hy-Drop Throttling valve
YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationHD and HDL Single-Stage Non-Lube Gas Compressors
COMPRESSORS CB-324 2013/05 Ethylene Ethylene Oxide HCFC s Helium n-heptane n-hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationMA-60M TRIPLEX. All drawings and specifications subject to change without notice.
1 Table of Contents POWER END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA... 4 LIQUID END ENGINEERING DATA (CONTINUED)... 5 GENERAL ENGINEERING DATA... 5 PUMP NAME PLATE... 6 PUMP CROSS-SECTION...
More informationBERMAD Waterworks. 800 Series. Technical Specifications Metric
Technical Specifications SI 800 Metric Series Patterns and Sizes "Y" Pattern DN40-500 Angle DN40-450 Connection Standard Flanged: ISO 7005-1(ISO 10, 16, 25 & 40) Water Temperature Up to 80ºC Working pressure
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationquincy qsg series QuincyCompressor.com Made in the U.S.A. Performance You Demand. Reliability You Trust. options & Accessories Applications
QUINCY qsg SERIES rotary screw gas compressor quincy qrng series reciprocating gas compressor natural gas compressors quincy qsg series rotary screw gas compressor durable design Quincy QSG rotary gas
More informationPOMPE À ENGRENAGES GEAR PUMP ASYBCO
POMPE À ENGRENAGES GEAR PUMP ASYBCO GEAR PUMP Series 5 Canadian General Purpose Designed and engineered to serve petroleum, chemical, process and manufacturing industries. GPM (289 L/m) PSI (690 kpa) /2
More informationMGP/MGPS Series SPECIFICATIONS
The MGP/MGPS Booster Pumps are the most durable booster pump available. The proven SignaSeal floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings,
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationVersatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More information