REPLACEABLE TIP DRILLS
|
|
- Andrew Arnold
- 5 years ago
- Views:
Transcription
1 REPLACEABLE TIP DRILLS Pages Pages Features & Benefits T-Drill Tips H 3XD Bodies H 5XD Bodies H 8XD Bodies H 12XD Bodies H 1.5XD Bodies & Tips
2 FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies that can accept multiple diameters Three styles of drill tips to maximize performance T-MTL - standard edge preparation for steel applications T-MEL - light edge preparation for super alloys, stainless steels, and cast irons T-MTL-C - chamfered edges to eliminate break out in cast iron T-MFS point angle flat edge tip carbide tips have Sumitomo s patented wear resistant DEX coatings TM Ground serrations on back of drill tip allow for precise assembly and superior repeatability Every drill tip is made with the famous Sumitomo Point Drill tips are capable of being reground Coolant through drill bodies Easy Assembly 1.) Confirm drill tip is compatible with drill body by checking diameter range listed on shank. 2.) Place replaceable carbide head on drill body so that the screw mounting holes line up. 3.) Insert assembly screws and tighten securely after screw mounting holes are lined up. Note: Mounting screws will only engage when the replaceable carbide head is in the correct position. Heads Toolholder(L/D) Applications ødc range (in/ mm) MType(3D) LType(5D) Genera DType(8D) Steel XD MType(3D) LType(5D) SUS SS DType(8D) FC XD T-MTL Type T-MEL Type T-C Type T- MFS Type Flat Head Tip Drill 1.5XD 5X Diameter 8X Diameter Structural Steel 180 flat edge 1.5X Diameter 3X Diameter 24.5 t o X Diameter Recommended Speeds and Feeds Speed: v (SFM) / Feed: f (IPR) 490 Material Drill Dia. (inch) ~.4688 ~.844 ~ v f v f v f MTL MTL MTL MTL MTL-C / MEL MEL MEL MEL Steels Prehard Die Steels Ductile Gray Titanium Inconel Stainless Steels Drill Tip cast Recommendations irons cast irons Steels* <HB250 HB HRC Steels * For difficult to machine stainless steels (316, 302, 304, 17-4ph, etc.) adjust speeds & feeds accordingly
3 Tip Drill Drill Tips Standard TIP SUPER ALLOY TIP Corner break TIP (T-MTL) (smdt-mel) (smdt-c) Inch & Metric Drill Tip Stock Drill Tip Stock Drill Tip Stock ød Body T04688MTL-ACX70 T04688MEL-ACX80 T04688MTL-C-ACX70 15/32 (0.4688) T1200MTL-ACX70 T1200MEL-ACX80 T1200MTL-C-ACX mm (0.4724) T1210MTL-ACX70 H T1210MEL-ACX80 H T1210MTL-C-ACX mm (0.4764) T1220MTL-ACX70 H T1220MEL-ACX80 H T1220MTL-C-ACX mm (0.4803) T1230MTL-ACX70 H T1230MEL-ACX80 H T1230MTL-C-ACX mm (0.4843) T04844MTL-ACX70 T04844MEL-ACX80 T04844MTL-C-ACX70 31/64 (0.4844) T1250MTL-ACX70 T1250MEL-ACX80 T1250MTL-C-ACX mm (0.4921) T1260MTL-ACX70 H T1260MEL-ACX80 H T1260MTL-C-ACX mm (0.4960) T05000MTL-ACX70 T05000MEL-ACX80 T05000MTL-C-ACX70 1/2 (0.5000) T1270MTL-ACX70 H T1270MEL-ACX80 H T1270MTL-C-ACX mm (0.5000) T1300MTL-ACX70 T1300MEL-ACX80 T1300MTL-C-ACX mm (0.5118) T05156MTL-ACX70 T05156MEL-ACX80 T05156MTL-C-ACX70 33/64 (0.5156) T1310MTL-ACX70 H T1310MEL-ACX80 H T1310MTL-C-ACX mm (0.5157) T05312MTL-ACX70 T05312MEL-ACX80 T05312MTL-C-ACX70 17/32 (0.5312) T1350MTL-ACX70 T1350MEL-ACX80 T1350MTL-C-ACX mm (0.5315) T1365MTL-ACX70 T1365MEL-ACX80 T1365MTL-C-ACX mm (0.5374) T05469MTL-ACX70 T05469MEL-ACX80 T05469MTL-C-ACX70 35/64 (0.5469) T1400MTL-ACX70 T1400MEL-ACX80 T1400MTL-C-ACX mm (0.5512) T1410MTL-ACX70 H T1410MEL-ACX80 H T1410MTL-C-ACX mm (0.5551) T1420MTL-ACX70 H T1420MEL-ACX80 H T1420MTL-C-ACX mm (0.5591) T05625MTL-ACX70 T05625MEL-ACX80 T05625MTL-C-ACX70 9/16 (0.5625) T1450MTL-ACX70 T1450MEL-ACX80 T1450MTL-C-ACX mm (0.5709) T05781MTL-ACX70 T05781MEL-ACX80 T05781MTL-C-ACX70 37/64 (0.5781) T1500MTL-ACX70 T1500MEL-ACX80 T1500MTL-C-ACX mm (0.5906) T05937MTL-ACX70 T05937MEL-ACX80 T05937MTL-C-ACX70 19/32 (0.5938) T06094MTL-ACX70 T06094MEL-ACX80 T06094MTL-C-ACX70 39/64 (0.6094) T1550MTL-ACX70 T1550MEL-ACX80 T1550MTL-C-ACX mm (0.6102) T1560MTL-ACX70 H T1560MEL-ACX80 T1560MTL-C-ACX mm (0.6142) T1570MTL-ACX70 H T1570MEL-ACX80 T1570MTL-C-ACX mm (0.6181) T06250MTL-ACX70 T06250MEL-ACX80 T06250MTL-C-ACX70 5/8 (0) T1600MTL-ACX70 T1600MEL-ACX80 T1600MTL-C-ACX mm (0.6300) T1608MTL-ACX70 T1608MEL-ACX80 T1608MTL-C-ACX mm (0.6331) T06406MTL-ACX70 T06406MEL-ACX80 T06406MTL-C-ACX70 41/64 (0.6406) T1630MTL-ACX70 T1630MEL-ACX80 T1630MTL-C-ACX mm (0.6417) T1650MTL-ACX70 T1650MEL-ACX80 T1650MTL-C-ACX mm (0.6496) T06562MTL-ACX70 T06562MEL-ACX80 T06562MTL-C-ACX70 21/32 (0.6563) T1700MTL-ACX70 T1700MEL-ACX80 T1700MTL-C-ACX mm (0.6693) T06719MTL-ACX70 T06719MEL-ACX80 T06719MTL-C-ACX70 43/64 (0.6719) T06875MTL-ACX70 T06875MEL-ACX80 T06875MTL-C-ACX70 11/16 (0.6875) T1750MTL-ACX70 T1750MEL-ACX80 T1750MTL-C-ACX mm (0.6890) T1760MTL-ACX70 T1760MEL-ACX80 T1760MTL-C-ACX mm (0.6929) T1770MTL-ACX70 H T1770MEL-ACX80 H T1770MTL-C-ACX mm (0.6969) T07031MTL-ACX70 T07031MEL-ACX80 T07031MTL-C-ACX70 45/64 (0.7031) T1800MTL-ACX70 T1800MEL-ACX80 T1800MTL-C-ACX mm (0.7087) T07187MTL-ACX70 T07187MEL-ACX80 T07187MTL-C-ACX70 23/32 (0.7188) T1850MTL-ACX70 T1850MEL-ACX80 T1850MTL-C-ACX mm (0.7283) T07344MTL-ACX70 T07344MEL-ACX80 T07344MTL-C-ACX70 47/64 (0.7344) T1900MTL-ACX70 T1900MEL-ACX80 T1900MTL-C-ACX mm (0.7480) T07500MTL-ACX70 T07500MEL-ACX80 T07500MTL-C-ACX70 3/4 (0) T1925MTL-ACX70 T1925MEL-ACX80 T1925MTL-C-ACX mm (0.7579) T07656MTL-ACX70 T07656MEL-ACX80 T07656MTL-C-ACX70 49/64 (0.7656) T1950MTL-ACX70 = USA Stocked item T1950MEL-ACX80 T1950MTL-C-ACX mm (0.7677) = Stock item H = Worldwide Warehouse item available in 10 business days Note: Special diameters available upon request H047 H049 H051 H055 H059 H063 H067 H071 H
4 Drill Tips Tip Drill Standard TIP super alloy TIP Corner break TIP (T-MTL) (smdt-mel) (smdt-c) Inch & Metric Drill Tip Stock Drill Tip Stock Drill Tip Stock ød Body T07812MTL-ACX70 T07812MEL-ACX80 T07812MTL-C-ACX70 25/32 (0.7813) T2000MTL-ACX70 T2000MEL-ACX80 T2000MTL-C-ACX mm (0.7874) T07969MTL-ACX70 T07969MEL-ACX80 T07969MTL-C-ACX70 51/64 (0.7969) H079 T2050MTL-ACX70 T2050MEL-ACX80 T2050MTL-C-ACX mm (0.8071) T08125MTL-ACX70 T08125MEL-ACX80 T08125MTL-C-ACX70 13/16 (0.8125) T2100MTL-ACX70 T2100MEL-ACX80 T2100MTL-C-ACX mm (0.8268) T2120MTL-ACX70 H T2120MEL-ACX80 H T2120MTL-C-ACX mm (0.8346) T08281MTL-ACX70 T08281MEL-ACX80 T08281MTL-C-ACX70 53/64 (0.8281) H083 T08437MTL-ACX70 T08437MEL-ACX80 T08437MTL-C-ACX70 27/32 (0.8438) T2150MTL-ACX70 T2150MEL-ACX80 T2150MTL-C-ACX mm (0.8465) T08594MTL-ACX70 T08594MEL-ACX80 T08594MTL-C-ACX70 55/64 (0.8594) T2200MTL-ACX70 T2200MEL-ACX80 T2200MTL-C-ACX mm (0.8661) T08750MTL-ACX70 T08750MEL-ACX80 T08750MTL-C-ACX70 7/8 (0.8750) T2245MTL-ACX70 T2245MEL-ACX80 T2245MTL-C-ACX mm (0.8839) H087 T2250MTL-ACX70 T2250MEL-ACX80 T2250MTL-C-ACX mm (0.8858) T08906MTL-ACX70 T08906MEL-ACX80 T08906MTL-C-ACX70 57/64 (0.8906) T2300MTL-ACX70 T2300MEL-ACX80 T2300MTL-C-ACX mm (0.9055) T09062MTL-ACX70 T09062MEL-ACX80 T09062MTL-C-ACX70 29/32 (0.9062) T09219MTL-ACX70 T09219MEL-ACX80 T09219MTL-C-ACX70 59/64 (0.9219) H091 T2350MTL-ACX70 T2350MEL-ACX80 T2350MTL-C-ACX mm (0.9252) T09375MTL-ACX70 T09375MEL-ACX80 T09375MTL-C-ACX70 15/16 (0.9375) T2400MTL-ACX70 T2400MEL-ACX80 T2400MTL-C-ACX mm (0.9449) T2410MTL-ACX70 H T2410MEL-ACX80 H T2410MTL-C-ACX mm (0.9488) H096 T09531MTL-ACX70 T09531MEL-ACX80 T09531MTL-C-ACX70 61/64 (0.9531) T2450MTL-ACX70 H T2450MEL-ACX80 T2450MTL-C-ACX mm (0.9646) T09687MTL-ACX70 T09687MEL-ACX80 T09687MTL-C-ACX70 31/32 (0.9687) T2500MTL-ACX70 T2500MEL-ACX80 T2500MTL-C-ACX mm (0.9843) T09844MTL-ACX70 T09844MEL-ACX80 T09844MTL-C-ACX70 63/64 (0.9844) T10000MTL-ACX70 T10000MEL-ACX80 T10000MTL-C-ACX70 1 (0) T2550MTL-ACX70 H T2550MEL-ACX80 T2550MTL-C-ACX mm (1.0039) H100 T2565MTL-ACX70 T2565MEL-ACX80 T2565MTL-C-ACX mm (1.0098) T10156MTL-ACX70 T10156MEL-ACX80 T10156MTL-C-ACX70 1-1/64 (1.0156) T2600MTL-ACX70 T2600MEL-ACX80 T2600MTL-C-ACX mm (1.0236) T10312MTL-ACX70 T10312MEL-ACX80 T10312MTL-C-ACX70 1-1/32 (1.0312) H104 T2650MTL-ACX70 H T2650MEL-ACX80 T2650MTL-C-ACX mm (1.0433) T10469MTL-ACX70 T10469MEL-ACX80 T10469MTL-C-ACX70 1-3/64 (1.0469) T10625MTL-ACX70 T10625MEL-ACX80 T10625MTL-C-ACX70 1-1/16 (1.0625) T2700MTL-ACX70 T2700MEL-ACX80 T2700MTL-C-ACX mm (1.0630) T10781MTL-ACX70 T10781MEL-ACX80 T10781MTL-C-ACX70 1-5/64 (1.0781) H107 T2750MTL-ACX70 H T2750MEL-ACX80 T2750MTL-C-ACX mm (1.0827) T10937MTL-ACX70 T10937MEL-ACX80 T10937MTL-C-ACX70 1-3/32 (1.0937) T2800MTL-ACX70 T2800MEL-ACX80 T2800MTL-C-ACX mm (1.1024) T11094MTL-ACX70 T11094MEL-ACX80 T11094MTL-C-ACX70 1-7/64 (1.1094) T2850MTL-ACX70 T2850MEL-ACX80 T2850MTL-C-ACX mm (1.1220) H112 T11250MTL-ACX70 T11250MEL-ACX80 T11250MTL-C-ACX70 1-1/8 (1.1250) T11406MTL-ACX70 T11406MEL-ACX80 T11406MTL-C-ACX70 1-9/64 (1.1406) T2900MTL-ACX70 T2900MEL-ACX80 T2900MTL-C-ACX mm (1.1417) T11562MTL-ACX70 T11562MEL-ACX80 T11562MTL-C-ACX70 1-5/32 (1.1562) H115 T2950MTL-ACX70 H T2950MEL-ACX80 T2950MTL-C-ACX mm (1.1614) T11719MTL-ACX70 T11719MEL-ACX80 T11719MTL-C-ACX /64 (1.1719) T3000MTL-ACX70 T3000MEL-ACX80 T3000MTL-C-ACX mm (1.1811) T11875MTL-ACX70 T11875MEL-ACX80 T11875MTL-C-ACX70 1-3/16 (1.1875) H118 T3050MTL-ACX70 T3050MEL-ACX80 T3050MTL-C-ACX mm (1.2008) 492 = USA Stocked item H = Worldwide Warehouse item available in 10 business days Note: Special diameters available upon request
5 Tip Drill Drill Tips Standard TIP SUPER ALLOY TIP Corner break TIP (T-MTL) (smdt-mel) (smdt-c) Inch & Metric Drill Tip Stock Drill Tip Stock Drill Tip Stock ød Body T3100MTL-ACX80 T3100MEL-ACX80 T3100MTL-C-ACX mm (1.2205) T12500MTL-ACX80 T12500MEL-ACX80 T12500MTL-C-ACX80 1 1/4 (0) H1250 T3200MTL-ACX80 T3200MEL-ACX80 T3200MTL-C-ACX mm (1.2598) T3300MTL-ACX80 T3300MEL-ACX80 T3300MTL-C-ACX mm (1.2992) T13125MTL-ACX80 T13125MEL-ACX80 T13125MTL-C-ACX80 1 5/16 (1.3125) H1319 T3400MTL-ACX80 «T3400MEL-ACX80 T3400MTL-C-ACX mm (1.3386) T3500MTL-ACX80 «T3500MEL-ACX80 T3500MTL-C-ACX mm (1.3780) H350 T3600MTL-ACX80 «T3600MEL-ACX80 T3600MTL-C-ACX mm (1.4173) H365 T3700MTL-ACX80 «T3700MEL-ACX80 T3700MTL-C-ACX mm (1.4567) T3750MTL-ACX80 «T3750MEL-ACX80 T3750MTL-C-ACX mm (1.4764) H380 T3800MTL-ACX80 «T3800MEL-ACX80 T3800MTL-C-ACX mm (1.4961) T3900MTL-ACX80 «T3900MEL-ACX80 T3900MTL-C-ACX mm (1.5354) H395 T4000MTL-ACX80 «T4000MEL-ACX80 T4000MTL-C-ACX mm (1.5748) T4050MTL-ACX80 «T4050MEL-ACX80 T4050MTL-C-ACX mm (1.5945) H410 T4100MTL-ACX80 «T4100MEL-ACX80 T4100MTL-C-ACX mm (1.6142) T4200MTL-ACX80 «T4200MEL-ACX80 T4200MTL-C-ACX mm (1.6535) H425 Cleaning instructions 1) Air Pressure Remove the used head and any debris from the serrated parts of the holder with an air blower. Attaching instructions 2) Brushing Use a wire or nylon brush to remove debris left behind by air blower. Recommended Tightening Torque Drill Head Size (in/mm) Screw Recommended Tightening Torque (in/lbs.) 6.6 to to to to to to 58.7 Caution! 1) Please wear safety gloves and glasses 2) Please remove from any adapator when replacing T Tip 3) If a new tip is lecft outside the box for long, it may be contaminated 1) Use caution when tightening the head screws. Make sure no excessive rattles. 2) Pre-tighten both left/ right screws until it stops lightly 3) Hold body and a wrench in straigh and tighten screws. Forcing out wrench may cause screw hole breakage. Serrations may contain some debris. Placing a tip without removing any foreign particles may cause loose screws and possibly lead to tip and body breakage. 493
6 3X DIAMETER 3X Diameter Tip Drill φdc h7 φds h6 Inch BODIEs (3X Diameter) Catalog Number H047M H049M H051M H055M H059M H063M H067M H071M H075M H079M H083M H087M H091M H096M H100M H104M H107M H112M H115M H118M H1250M H1319M Drill Tip Diameter ødc (inch/mm) Stock øds L mm mm 12.50mm mm 13.00mm mm 13.50mm mm 14.51mm mm 15.51mm mm 16.51mm mm 17.51mm mm 18.51mm mm 19.51mm mm 20.51mm mm 21.51mm mm 22.81mm mm 23.81mm mm 24.81mm mm 25.81mm mm 26.81mm mm 27.81mm mm 28.81mm mm 29.81mm mm 30.81mm mm mm mm max depth Screw Wrench Metric BODIEs (3X Diameter) 3X Diameter Body No. Drill Tip Diameter ødc (inch/mm) Stock øds L max depth Screw Wrench H120M mm mm H H125M mm mm H H130M mm mm H H140M mm mm H H150M mm mm H H160M mm mm H H170M mm mm H H180M mm mm H H190M mm mm H H200M mm mm H H210M mm mm H H220M mm mm H H230M mm mm H H240M mm mm H H250M mm mm H H260M mm mm H H270M mm mm H H280M mm mm H H290M mm mm H H300M mm mm H H320M mm mm H H335M mm mm H H350M mm mm H BX0515 HD040 H365M mm mm H BX0515 HD040 H380M mm mm H BX0515 HD040 H395M mm mm H BX0515 HD040 H410M mm mm H BX0515 HD040 H425M mm mm H BX0515 HD040 H = Worldwide Warehouse item available in 10 business days = USA Stocked item Note: Special diameters available upon request 494
7 Tip Drill 5X DIAMETER 5X Diameter φdc h7 φds h6 Inch BODIEs (5X Diameter) Catalog Number H047L H049L H051L H055L H059L H063L H067L H071L H075L H079L H083L H087L H091L H096L H100L H104L H107L H112L H115L H118L H1250L H1319L Drill Tip Diameter ødc (inch/mm) mm mm 12.50mm mm 13.00mm mm 13.50mm mm 14.51mm mm 15.51mm mm 16.51mm mm 17.51mm mm 18.51mm mm 19.51mm mm 20.51mm mm 21.51mm mm 22.81mm mm 23.81mm mm 24.81mm mm 25.81mm mm 26.81mm mm 27.81mm mm 28.81mm mm 29.81mm mm 30.81mm mm mm mm Stock øds L Screw Wrench max depth Metric BODIEs (5X Diameter) 5X Diameter Body No. Drill Tip Diameter ødc (inch/mm) Stock øds L max depth Screw Wrench H120L mm mm H H125L mm mm H H130L mm mm H H140L mm mm H H150L mm mm H H160L mm mm H H170L mm mm H H180L mm mm H H190L mm mm H H200L mm mm H H210L mm mm H H220L mm mm H H230L mm mm H H240L mm mm H H250L mm mm H H260L mm mm H H270L mm mm H H280L mm mm H H290L mm mm H H300L mm mm H H320L mm mm H H335L mm mm H H350L mm mm H BX0515 HD040 H365L mm mm H BX0515 HD040 H380L mm mm H BX0515 HD040 H395L mm mm H BX0515 HD040 H410L mm mm H BX0515 HD040 H425L mm mm H BX0515 HD040 H = Worldwide Warehouse item available in 10 business days = USA Stocked item Note: Special diameters available upon request 495
8 8X DIAMETER Tip Drill 8X Diameter φdc h7 φds h6 Inch BODIEs (8X Diameter) Catalog Number H055D H059D H063D H067D H071D H075D H079D H083D H087D H091D H096D H100D H104D H107D H112D H115D H118D Drill Tip Diameter ødc (inch/mm) mm mm 14.51mm mm 15.51mm mm 16.51mm mm 17.51mm mm 18.51mm mm 19.51mm mm 20.51mm mm 21.51mm mm 22.81mm mm 23.81mm mm 24.81mm mm 25.81mm mm 26.81mm mm 27.81mm mm 28.81mm mm 29.81mm mm Stock øds L max depth Screw Wrench 496 Metric BODIEs (8X Diameter) 8X Diameter Body No. Drill Tip Diameter ødc (inch / mm) Stock øds L max depth Screw Wrench H140D mm mm H H150D mm mm H H160D mm mm H H170D mm mm H H180D mm mm H H190D mm mm H H200D mm mm H H210D mm mm H H220D mm mm H H230D mm mm H H240D mm mm H H250D mm mm H H260D mm mm H H270D mm mm H H280D mm mm H H290D mm mm H H300D mm mm H H320D mm mm H H335D mm mm H H350D mm mm H BX0515 HD040 H365D mm mm H BX0515 HD040 H380D mm mm H BX0515 HD040 H395D mm mm H BX0515 HD040 H410D mm mm H BX0515 HD040 H425D mm mm H BX0515 HD040 H = Worldwide Warehouse item available in 10 business days = USA Stocked item Note: Special diameters available upon request
SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More informationSMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling
Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different
More informationSummer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts
Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More informationEZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More information2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationBody Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationSECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS
SECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS 335.25 DISC MILLING CUTTER Seco continues to meet and exceed customer demand with the addition of two new insert
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationApril /10 CHAMFERING RINGS FOR. and. Available for
1/10 CHAMFERING RINGS FOR Available for and CHAMFERING RINGS FOR Available for and 2/10 FEATURES Compatible with DRIRUSH Available for TOPDRI and T-DRI with 3XD, 4XD Adjustable step length Minimized cycle
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationMACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction
No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationKOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
More informationBoring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials
oring Reaming urnishing Threading rilling S 320 High Penetration Solid arbide Solutions Specials S 320 High Penetration Solid arbide rilling System iameter Range: 3.00mm - 20.00mm (0.1181-0.7874 ) eyond
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationCera-Notch Grooving and Threading System
Cera-Notch Grooving and Threading System Grooving Threading Face Grooving FC Program Inside Deep Grooving Grooving with Cermets Characteristics: Offer better surface finishes on carbon and alloy steel
More informationBurr-Rx Brushes. Introducing the most aggressive line of compliant brushing tools ever! New Filament Cuts 400% Faster For Minimum Cycle Times!
~Ceramic Filament Brochure.qxd 4/4/08 9:51 AM Page 1 Burr-Rx es Introducing the most aggressive line of compliant brushing tools ever! Mounts Directly onto Shell Mill Holder! New Filament Cuts 400% Faster
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationNewest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationNPA. Expansion of the SUMOCHAM Drill Line. New Product Announcement. Page 1 / 6
NPA Expansion of the SUMOCHAM Drill Line Page 1 / 6 Page 2 / 6 Following market demand, ISCAR is expanding the lower diameter range of the SUMOCHAM 8xD and the lower diameter range of the HCP and FCP drilling
More information2007 Product Catalog
2007 Product Catalog Get your money s worth and more. Power. Precision. Performance. Everything you need to make your operation more efficient, more productive and more profitable. It s all there, in every
More informationMP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
More informationYE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationImproved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationHIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS
HIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS T-Burst; T-Clamp Ultra Plus Series Swiss Type Holders.375".500.625 Traditional Holders.75 1.00 Widths 2mm (.079 ) 3mm (.118") 4mm (.157") 5mm
More informationSMART DAMPER. Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended Reach Milling A PRODUCT OF:
NEW! Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended each Milling A PODUCT OF: OVEVIEW Quick and excellent damping effect tool holder. esults From Vibration With ong
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationHY-PRO AERO-F Inch & Metric Plug (4P-5P)
HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605
More information