April /10 CHAMFERING RINGS FOR. and. Available for
|
|
- Camron Farmer
- 6 years ago
- Views:
Transcription
1 1/10 CHAMFERING RINGS FOR Available for and
2 CHAMFERING RINGS FOR Available for and 2/10 FEATURES Compatible with DRIRUSH Available for TOPDRI and T-DRI with 3XD, 4XD Adjustable step length Minimized cycle time credit to drilling / chamfering as a single operation TaeguTec, the supplier of cost competitive high productivity indexible drill lines, now introduces chamfering rings to promote machining convenience for end-users in hole making applications. TaeguTec chamfering rings can be used to drill and chamfer in a single operation to minimize cycle time as well as inventory for improved economy. All chamfering rings are compatible with DRIRUSH, TOPDRI as well as T-DRI holders to control drilling depth. The TT9080 specially treated, multi-layered PVD coated CRNG inserts enable stable machining and long tool life.
3 Chamfering ring 3/10 D T Designation Dimension (mm) D T Chamfer Size Chamfer Insert Insert Screw Wrench Clamping Screw -Wrench CFR D100-A D105-A D110-A D115-A D120-A D125-A SH M4x0.7x12 (1) -W3 D130-A D135-A D140-A D145-A D150-A CRNG CD SO 25065I TD 7 D160-A D170-A D180-A D190-A D200-A D210-A SH M5x0.8x16 (2) -W4 D220-A D230-A D240-A D250-A * (1) Clamping torque : 4 [N m] * (2) Clamping torque : 6-7 [N m] Insert W Grade: TT9080 S 45 Designation W S CRNG CD
4 Assembly 4/10 (Available for TOPDRI & T-DRI in 3xD, 4xD) DRIRUSH TOPDRI & T-DRI Diameter range Chamfering ring description Diameter range Chamfering ring description CFR D100-A CFR D105-A CFR D110-A CFR D115-A CFR D120-A CFR D125-A CFR D125-A CFR D130-A CFR D130-A CFR D135-A CFR D135-A CFR D140-A CFR D140-A CFR D145-A CFR D145-A CFR D150-A CFR D150-A CFR D160-A CFR D160-A CFR D170-A CFR D170-A CFR D180-A CFR D180-A CFR D190-A CFR D190-A CFR D200-A CFR D200-A CFR D210-A CFR D210-A CFR D220-A CFR D220-A CFR D230-A CFR D230-A CFR D240-A CFR D240-A CFR D250-A CFR D250-A45
5 Assembly of chamfering ring 5/10 1. Insert the chamfering ring on to the drill body. The stopper must be inside the flute. 2. Slide the chamfering ring to the desired position. 3. Rotate the chamfering ring counterclockwise until stopper engages the flute edge. 4. Tighten the chamfering ring and clamp the drill head. When the chamfering ring is clamped correctly, the drill flute will be aligned with the chamfering ring flute.
6 Recommendations for stable machining 6/10 Recommend 3xD 5xD 1. If possible, always use a short holder. If not, reduce the cutting speed to minimize vibration. 2. Mount the chamfering ring as close as possible to the drill shank when drilling a through hole. 3. For better insert life, apply external and internal coolant to the insert. 4. When mounting the chamfering ring, please ensure that it does not block the coolant. More than 1mm
7 DRIRUSH 7/10 3D 5D 8D Designation CFR Designation min max TCD T3-3D CFR D130-A T3-3D CFR D135-A T3-3D CFR D140-A T3-3D CFR D145-A T3-3D CFR D150-A T3-3D CFR D160-A T3-3D CFR D170-A T2-3D CFR D180-A T2-3D CFR D190-A T2-3D CFR D200-A T2-3D CFR D210-A T2-3D CFR D220-A T2-3D CFR D230-A T2-3D CFR D240-A T2-3D CFR D250-A TCD T3-5D CFR D100-A T3-5D CFR D105-A T3-5D CFR D110-A T3-5D CFR D115-A T3-5D CFR D120-A T3-5D CFR D125-A T3-5D CFR D130-A T3-5D CFR D135-A T3-5D CFR D140-A T3-5D CFR D145-A T3-5D CFR D150-A T3-5D CFR D160-A T3-5D CFR D170-A T2-5D CFR D180-A T2-5D CFR D190-A T2-5D CFR D200-A T2-5D CFR D210-A T2-5D CFR D220-A T2-5D CFR D230-A T2-5D CFR D240-A T2-5D CFR D250-A TCD T3-8D CFR D100-A T3-8D CFR D105-A T3-8D CFR D110-A
8 DRIRUSH 8/10 8D 12D Designation CFR Designation min max TCD T3-8D CFR D115-A T3-8D CFR D120-A T3-8D CFR D125-A T3-8D CFR D130-A T3-8D CFR D135-A T3-8D CFR D140-A T3-8D CFR D145-A T3-8D CFR D150-A T3-8D CFR D160-A T3-8D CFR D170-A T2-8D CFR D180-A T2-8D CFR D190-A T2-8D CFR D200-A T2-8D CFR D210-A T2-8D CFR D220-A T2-8D CFR D230-A T2-8D CFR D240-A T2-8D CFR D250-A TCD T3-12D CFR D100-A T3-12D CFR D105-A T3-12D CFR D110-A T3-12D CFR D115-A T3-12D CFR D120-A T3-12D CFR D125-A T3-12D CFR D130-A T3-12D CFR D135-A T3-12D CFR D140-A T3-12D CFR D145-A T3-12D CFR D150-A T3-12D CFR D160-A T3-12D CFR D170-A T2-12D CFR D180-A T2-12D CFR D190-A T2-12D CFR D200-A T2-12D CFR D210-A T2-12D CFR D220-A T2-12D CFR D230-A T2-12D CFR D240-A T2-12D CFR D250-A
9 TOPDRI and T-DRI 9/10 3D 4D TOPDRI T-DRI CFR Designation min max TOP - TDR T2-05 CFR D125-A T2-05 CFR D130-A T2-05 CFR D135-A T T2-05 CFR D140-A T T2-05 CFR D145-A T T2-05 CFR D150-A T T2-06 CFR D160-A T T2-06 CFR D160-A T T2-06 CFR D170-A T T2-06 CFR D170-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D190-A T T2-06 CFR D190-A T T2-06 CFR D200-A T T2-06 CFR D200-A T T2-06 CFR D210-A T T2-07 CFR D210-A T T2-07 CFR D220-A T T2-07 CFR D220-A T T2-07 CFR D230-A T T2-07 CFR D230-A T T2-07 CFR D240-A T T2-07 CFR D240-A T T2-07 CFR D250-A TOP - TDR T2-05 CFR D125-A T2-05 CFR D130-A T2-05 CFR D135-A T T2-05 CFR D140-A T T2-05 CFR D145-A T T2-05 CFR D150-A T T2-06 CFR D160-A T T2-06 CFR D160-A T T2-06 CFR D170-A T T2-06 CFR D170-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D190-A T T2-06 CFR D190-A
10 TOPDRI and T-DRI 10/10 4D 5D TOPDRI T-DRI CFR Designation min max TOP T2-07 TDR T2-06 CFR D200-A T T2-06 CFR D200-A T T2-06 CFR D210-A T T2-07 CFR D210-A T T2-07 CFR D220-A T T2-07 CFR D220-A T T2-07 CFR D230-A T T2-07 CFR D230-A T T2-07 CFR D240-A T T2-07 CFR D240-A T T2-07 CFR D250-A TOP - TDR T2-05 CFR D125-A T2-05 CFR D130-A T2-05 CFR D135-A T T2-05 CFR D140-A T T2-05 CFR D145-A T T2-05 CFR D150-A T T2-06 CFR D160-A T T2-06 CFR D160-A T T2-06 CFR D170-A T T2-06 CFR D170-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D180-A T T2-06 CFR D190-A T T2-06 CFR D190-A T T2-06 CFR D200-A T T2-06 CFR D200-A T T2-06 CFR D210-A T T2-07 CFR D210-A T T2-07 CFR D220-A T T2-07 CFR D220-A T T2-07 CFR D230-A T T2-07 CFR D230-A T T2-07 CFR D240-A T T2-07 CFR D240-A T T2-07 CFR D250-A
January /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationCoromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationHIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS
HIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS T-Burst; T-Clamp Ultra Plus Series Swiss Type Holders.375".500.625 Traditional Holders.75 1.00 Widths 2mm (.079 ) 3mm (.118") 4mm (.157") 5mm
More informationITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW
TAPER 8 to 10 threads chamfered for easy thread starting in tough materia. PLUG BOTTOMING 3 to 5 threads chamfered for genera use when tapping to bottom of hoe is not critica. This is the most popuar tap
More information8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationNPA. Expansion of the SUMOCHAM Drill Line. New Product Announcement. Page 1 / 6
NPA Expansion of the SUMOCHAM Drill Line Page 1 / 6 Page 2 / 6 Following market demand, ISCAR is expanding the lower diameter range of the SUMOCHAM 8xD and the lower diameter range of the HCP and FCP drilling
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationBody Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
More informationSMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling
Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationSilver fox -New indexable drills for shallow holes
Silver fox -New indexable drills for shallow holes 1 Internal coolant hose connecter, which is used in lathe. 2 New tool body material with greatly improved tool rigidity. 3 Tool body with specially treated
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationSIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationSummer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts
Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationT-Clamp Ultra & T-Clamp Ultra Plus
T-Clamp Ultra & T-Clamp Ultra Plus FEATURE ADVANTAGE T-Clamp ULTRA T-Clamp ULTRA PLUS All Inserts fits in Holders, Blades & Bars Reduce Costs Turning, Profiling, Grooving & Cut Off ID Turning & Grooving
More informationTAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationNew High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationBoring. Reaming. Burnishing. Threading. Drilling. BT-A Drill. BTA-STS (Single Tube System) Machining. Specials
oring Reaming urnishing Threading rilling T- rill T-STS (Single System) Machining Specials T- rill T (STS) eep Hole Machining System iameter Range: 12.95mm - 47.80mm (0.5100-1.8820 ) Material jection with
More informationO-D TOOL & CUTTER INC. End Mill Catalog
O-D TOOL & CUTTER INC. End Mill Catalog O-D TOOL & CUTTER INC. 150 GILBERT STREET, MANSFIELD, MA 02048 Tel: (508) 339-7507 Fax: (508) 339-5667 Website: www.odtool.com CARBIDE 4 FLUTE WAVE MILLS WITH ALTIN
More informationEnd Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring. Remember to use COPASLIP anti-seize compound on all insert screws
End Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring Designation d³ d¹ d² l¹ l² tmax -0500-36.500.185.625 3.65 1.74 1.64 10 1-0500-44.500.185.625 4.40 2.49 2.39 10 1-0500-51.500.185.625
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationCUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32
JOBBER LENGTH NITRO DRILL BITS 135 SPLIT POINT MADE IN USA 10601 1/16 10623 13/32 10602 5/64 10624 27/64 10603 3/32 10625 10604 7/64 10626 29/64 10605 1/8 10627 15/32 10606 9/64 10628 31/64 10607 5/32
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationDrills for Industrial Maintenance and Repair Applications
Drills for Industrial Maintenance and Repair Applications Dormer Pramet is your one-stop manufacturer with a comprehensive program of rotary and indexable tooling with more than 150 years of industry experience.
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 31716 HONDA (For ipod ) FIT Issue Date MAR 2006 PARTS LIST Attachment Kit P/N 08A28-1H1-800 4 Cushion tapes Honda Music Link Kit P/N
More informationEZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
More information360 Tapping Machine. Description
Sizes: 2- to 6-inch Model 360B Bulletin No: 1000.004.08 Version: 06.2018 Cross Indexing No: n/a Supersedes: 1000.004.07 (12.2017) Description Tapping machines are used for making connections to pipelines,
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationA New T-BURST Holder for Swiss Turning Applications
1/15 A New T-BURST Holder or Swiss Turning Applications 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More information2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
More information360 Tapping Machine. Description. Features. The basic machine includes:
Sizes: 2- to 6-inch Model 360A and 360B Bulletin No: 1000.004.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.004.06 (05.2017) Description Tapping machines are used for making connections to
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationUpdated gear lash procedures for the compact gear train assembly have been added to the Series 60 Service Manual.
NUMBER: 14 60 03 S.M. REF.: 1.21 ENGINE: 60 DATE: November 2003 SUBJECT: GEAR TRAIN AND CAMSHAFT GEAR LASH PROCEDURES FOR THE COMPACT GEAR TRAIN ASSEMBLY INTRODUCTION Updated gear lash procedures for the
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationExpansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
More informationVolkswagen Transporter T4 syncro Chassis suspension lift Volkswagen Transporter T4 front drive Chassis suspension lift
Nummer: Stand: 11.2017 1011 0002 This installation guide applies to these part n /descriptions: 1011 0002 syncro 1011 0003 front drive As on: 11.2017 Page 1 of 6 SEIKEL GmbH Nummer: Stand: 11.2017 Important
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationCutting Tool. NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head)
1,166 167 168,169 170 170 173 173 174 174 174 NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head) EXTENTION ARBOR (For Standard Head)
More informationUniversal Pitch-Adjustable Wall Mount For Flat Panel Display PLP-91/D
INSTALLATION INSTRUCTIONS Universal Pitch-Adjustable Wall Mount For Flat Panel Display PLP-91/D Your new Wall Mount (PLP-91/D) is a quick disconnect mounting system with adjustability between 0 and 15
More informationTECHNICAL SERVICE BULLETIN
TECHNICAL SERVICE BULLETIN SUBJECT: NO.: 09-15-93 Camshaft Timing Belt Replacement/Adjustment GROUP: Engine Service Procedure DATE: Sep.17, 1993 This Bulletin Is Supplied As Technical Information Only
More informationWith over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationWeb :
02701133 9011001595 Email: info@manartools.com manartools@gmail.com Web : www.manartools.in, www.manartools.com, http://www.indiamart.com/manartools/ Introduction Our Products We are specialize in manufacturing
More information3IN1 SELF-CLOSING HINGE USER GUIDE
3IN1 SELF-CLOSING HINGE USER GUIDE (TOP, MIDDLE, BOTTOM) = (SS, HA, SA) For door < 260 pounds (120 kg) Before Hinge Adjustment The quality of door installation is super important and could affect the self-closing
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description BHP452 Cordless Percussion Driver Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Model BHP452 has been developed as a cost-competitive 18V
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationShown on engine 904.9
AR01.30-W-5800A Remove/install cylinder head 22.11.06 ENGINE 904.9 in MODEL 374, 375, 673, 674, 676, 958, 970, 972, 975, 976 ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976 ENGINE 906.9 in MODEL
More information1995 Mitsubishi Montero LS. Ensure timing marks are aligned. Mark timing belt direction of rotation.
TIMING BELT NOTE: Ensure timing marks are aligned. Mark timing belt direction of rotation. Removal 1. Disconnect negative battery cable. Drain engine coolant. Remove engine coolant reservoir tank, fan
More informationHSK-T TOOLING SYSTEMS for TURNING MILL. World standard ISO. for Turning Mill SET SCREW HOLDERS FOR ROUND SHANK INSERT HOLDERS FOR SQUARE-SHANK
HSK-T TOOING SYSTES for TURNING I SET SCREW HODERS FOR ROUND SHANK For through-spindle coolant CC type For nozzle-coolant CN type P. 71 World standard ISO for Turning ill INSERT HODERS FOR SUARE-SHANK
More informationHandle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationApril 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationE3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More information2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description SP6000 Plunge Cut Circular Saw 165mm (6-1/2") CONCEPT AND MAIN APPLICATIONS Model SP6000 is the first Makita plunge cut saw. Features great conveniences such
More information