Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).

Size: px
Start display at page:

Download "Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch)."

Transcription

1 igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30 (BIG-LUS TM ) integrated arbor types are available. alloys Other non-ferrous metal ot suitable for cast iron or steel. Characteristics Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch). igh Feed, igh-efficiency with edge Design Conventional Tool f z =0.08mm/t FF12080R f z =0.16mm/t 2,880mm/min 3.4 Times Machining Efficiency 9,800mm/min igh Feed / Light s igh-speed Case (Frame ) ToolFF12080R-25.4ø80 10 Flutes Conventional ø80 6Flutes Reduces burrs by using a double-chamfered cutting edge. Drastically reduces burrs by Conv. Edge preventing the plastic deformation that causes burrs. A6061Blanks Cutting Conditionsv c =3,142m/min, f z =0.10mm/t a p =0.5mm, Dry 0 2,500 5,000 7,500 10,000 v f (mm/min) Maximum Allowable Spindle Speed and Feed Rate Enables Easy Run-Out Correction m 6.0 FJ Do not exceed the maximum allowable spindle speed (n max) specified for each cutter diameter. (*See the table on the upper right.) Reduces running costs by significantly increasing the insert regrinding amount (to 1.8mm). Assuming the amount of regrinding to be 0.2mm, an edge can be used up to 10 times. * Given the condition of normal wear with ap of 1.4mm or less 0.416mm Burrs are formed. Double-Chamfered Edge Main Chamfer Sub Chamfer The wedge clamp with anti-scattering mechanism ensures safety and operability. When Clamping Anti-scattering Stopper W When Unclamping Cutter Diameter n max v c f z Max. o. of Teeth v f (mm) (min -1 ) ø80 ø100 ø125 11,000 9,500 7,500 Anti-scattering Stopper (m/min) (mm/t) (Edges) (mm/min) 2,763 2,983 2,944 to 0.2 to 0.2 to to 22,000 to 22,800 to 22, mm Max. Regrinding Amount o Burrs Regrinding ortion The regrinding amount has been significantly increased compared to conventional screw-lock types. Improved chip evacuation with internal coolant (FF type and FF-BBT30 type) The effect of internal coolant controls chip blockages and packing in the work material and improves tool life. (Use an arbor that supports internal coolant.) *1 BIG-LUS TM is a trademark of BIG DAWA SEIKI CO., LTD. *2 Can also be used with BT30 spindle machines. 128

2 Expansion igh Efficiency Cutter for F Type Chipbreaker Selection Type L G GX W Insert ure FA15 Edge treatment Characteristics Low cutting force Standard Long Edge Strong Edge Reduction of Back Force General purpose Roughing Emphasis on Fracture Resistance Wiper * Max. Depth of Cut Only GX type is 9.0mm Edge Length (*) 6.0mm 6.0mm 9.0mm 6.0mm Chipbreaker Map Low Toughness L Reduction of Back Force General purpose Standard G Strong Cutting edge GX Roughing Emphasis on Fracture Resistance Large Structure of F Type The axial set screw and balance adjustment screw hole have been embedded with a special material. A screwdriver or Allen key cannot be inserted into the hole. Clamp FW Clamp Bolt WB6-13T Adjustment screw FJ Insert F-LDE Amount of Gap W 0.55mm Insert Mounting Direction Loosen the screw by one turn before removing the insert. Take note that if the insert is forcibly removed in a wrong direction, the tool may be damaged mm reset Wiper Gap 1.0mm L G GX igh Feed Examples / Light s igh-speed Automotive Component Sumitomo Engine Component Sumitomo Body Insert Cat. o. o. of Teeth v c (m/min) n(min -1 ) v f (mm/min) f z (mm/t) a p (mm) FF12100R-25.4 F-LDE12T3ZDTR- 12 Teeth 1,884 6,000 3, Body Insert Cat. o. o. of Teeth v c (m/min) n(min -1 ) v f (mm/min) f z (mm/t) a p (mm) FF12125R F-LDE12T3ZDFR-G 15 Teeth 2,945 7,500 6, Coolant Wet (Internal coolant) Coolant Wet (Internal coolant) Results Double the tool life of conventional external coolant type for 3,600 units. Good machined surface. Results 1.7x the tool life of conventional external coolant type for 17,000 units. Breaks chips into even finer chips. 129

3 igh Efficiency Cutter for FM 12000RS / R Type Rake Angle M Stainless K on-ferrous Metal S Exotic ardened 1 SFMS 2 SFMS 3 B B SFMS B Expansion D2 BodyFine itch2 Flutes / Metric Cat. o. Stock Diameter Max. Diameter Boss Total Length ole Size Grooving Width Grooving Depth Mounting Depth Bolt Bolt o. of Weight SFMS B D2 Teeth (kg) FM 12080RS RS RS RS RS FM 12080R R R R R R Dimensions (mm) igh Feed / Light s igh-speed Inserts igh Speed/Light General Roughing Unitsmm Cat. o. Length Unique wiper edge F-LDE 12T3ZDFR-L 6.0 Straight General purpose 4 12T3ZDFR-G 6.0 Arc General purpose 4 12T3ZDTR- 6.0 Arc Strong edge 4 12T3ZDFR-GX 9.0 Arc Long Edge 5 12T3ZDFR-W Arc Wiper 6 arts Clamp Clamp Bolt Adjustment Screw Adjusting Wrench Wrench Assembling Wrench m FW WB6-13T 6.0 FJ TTX20 RFT FVT m Recommended Tightening Torque ( m) M Stainless K on-ferrous Metal S Exotic ardened ardness F M R S -22 (2) M: Fine itch (3) Insert Size Cutter Diameter (5) Direction (6) Metric Bore Oil ole ote

4 Rake Angle M K S Stainless on-ferrous Metal Exotic ardened igh Efficiency Cutter for FF 12000RS / R Type 1 SFMS 2 SFMS 3 B B SFMS B Expansion BodyExtra-Fine itch3 Flutes / Metric D2 Cat. o. Stock Diameter Max. Diameter Boss Total Length ole Size Grooving Width Grooving Depth Mounting Depth Bolt Bolt o. of Weight SFMS B D2 Teeth (kg) FF 12080RS RS RS RS RS FF 12080R R R R R R Dimensions (mm) Inserts igh Speed/Light General Roughing Unit(mm) Cat. o. Length Unique wiper edge F-LDE 12T3ZDFR-L 6.0 Straight General purpose 4 12T3ZDFR-G 6.0 Arc General purpose 4 12T3ZDTR- 6.0 Arc Strong edge 4 12T3ZDFR-GX 9.0 Arc Long Edge 5 12T3ZDFR-W Arc Wiper 6 arts Clamp late Clamp Bolt Adjustment Screw Adjusting Wrench Wrench Assembling Wrench m FW WB6-13T 6.0 FJ TTX20 RFT FVT m Recommended Tightening Torque ( m) M Stainless K on-ferrous Metal S Exotic ardened igh Feed / Light s igh-speed ardness F F R S -22 (2) (3) F: Extra-Fine itch Insert Size Cutter Diameter (5) Direction (6) Metric Bore Oil ole ote

5 igh Efficiency Cutter for FF 12000RS / R Type Rake Angle M Stainless K on-ferrous Metal S Exotic ardened igh Feed / Light s igh-speed 6 1 SFMS 2 SFMS 3 SFMS B B B D2 Dimensions (mm) Cat. o. Stock Diameter Max. Diameter Boss Total Length ole Size Grooving Width Grooving Depth Mounting Depth Bolt Bolt o. of Weight SFMS B D2 Teeth (kg) 12125RS M Stainless K on-ferrous Metal S Exotic ardened BodyExtra-Fine itch3 Flutes / W/ Oil ole Metric FF 12080RS RS RS RS FF 12080R R R R R R Inserts igh Speed/Light General Roughing Unit(mm) Unique Cat. o. Length wiper edge F-LDE 12T3ZDFR-L 6.0 Straight General purpose 4 12T3ZDFR-G 6.0 Arc General purpose 4 12T3ZDTR- 6.0 Arc Strong edge 4 12T3ZDFR-GX 9.0 Arc Long Edge 5 12T3ZDFR-W Arc Wiper 6 arts Clamp late Clamp Bolt Adjustment Screw Adjusting Wrench Wrench Assembling Wrench m FW WB6-13T 6.0 FJ TTX20 RFT FVT m Recommended Tightening Torque ( m) ardness F F R S -22 (2) (3) F: Extra-Fine itch With Oil oles Insert Size (5) Cutter Diameter (6) Direction Metric Bore (8) Oil ole ote

6 Rake Angle M Stainless K on-ferrous Metal S Exotic ardened igh Efficiency Cutter for FF 12000R-BBT30 Type Inserts igh Speed/Light General Roughing Unit(mm) Cat. o. Length Unique wiper edge F-LDE 12T3ZDFR-L 6.0 Straight general purpose 1 12T3ZDFR-G 6.0 Arc general purpose 1 12T3ZDTR- 6.0 Arc Strong edge 1 12T3ZDFR-GX 9.0 Arc Long Edge 2 12T3ZDFR-W Arc Wiper 3 M Stainless K on-ferrous Metal S Exotic ardened BBT BodyExtra-Fine itch3 Flutes / W/ Oil ole Dimensions (mm) Cat. o. Stock Diameter Max. Diameter o. of Weight Teeth (kg) FF 12080R-BBT R-BBT R-BBT arts Clamp late Clamp Bolt Adjustment Screw Adjusting Wrench Wrench Assembling Wrench m FW WB6-13T 6.0 FJ TTX20 RFT FVT m Recommended Tightening Torque ( m) igh Feed / Light s igh-speed ardness ote F F R-BBT30 (2) (3) Extra-Fine itch With Oil oles Insert Size (5) (6) Cutter Diameter Direction Compatible Arbor Symbol *1 BIG-LUS TM is a trademark of BIG DAWA SEIKI CO., LTD. *2 Can also be used with BT30 spindle machines. 133

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch). igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30

More information

WFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill

WFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries

More information

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

Machining Intelligently

Machining Intelligently ISCAR s Solutions for Manufacturing Turbochargers Machining Intelligently ISCAR HIGH Q LINES www.iscar.com Turbocharger Industries Turbine Housing Compressor Housing Turbine Wheel Bearing Housing In today

More information

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...

More information

KGD for Automatic Lathe

KGD for Automatic Lathe Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535

More information

8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332

8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332 8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d

More information

GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker

GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges

More information

High Efficiency Drilling in Various Types of Machining

High Efficiency Drilling in Various Types of Machining TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling

More information

AQUA DRILL EX FLAT SERIES

AQUA DRILL EX FLAT SERIES AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,

More information

Features. May 1, No. 204-M-02

Features. May 1, No. 204-M-02 May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges

More information

Breaker. Sensation of high speed aluminum machining. Feature

Breaker. Sensation of high speed aluminum machining. Feature VF Sensation of high speed aluminum machining Breaker Feature - Multi-dimension clamping system : strong clamping force in high speed operation. - Buffed top face : Decreasing built-up edge & excellent

More information

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &

More information

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert! TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.

More information

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &

More information

Grooving Tool Holders GND Type

Grooving Tool Holders GND Type TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving

More information

Specializing In High Performance Solid Carbide Cutting Tools

Specializing In High Performance Solid Carbide Cutting Tools Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for

More information

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions

VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS

More information

Reduced Chip Biting Issues when Grooving Small Parts

Reduced Chip Biting Issues when Grooving Small Parts Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application

More information

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry

More information

Body Length (mm) New Tool Ref Length (mm)

Body Length (mm) New Tool Ref Length (mm) 3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *

More information

PCD & CBN TANGENTIAL MILLING

PCD & CBN TANGENTIAL MILLING & TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS

More information

Improved Grooving Performance with Expansive Tooling System Lineup

Improved Grooving Performance with Expansive Tooling System Lineup KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD

More information

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change

More information

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even

More information

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance

More information

MFH-RAPT R High Feed Milling Cutter

MFH-RAPT R High Feed Milling Cutter MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information

AQUA Drill EX FLAT Series New Drilling Technology

AQUA Drill EX FLAT Series New Drilling Technology AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long

More information

TR4D. High Feed Radius Mill. New Product News No. H1901A

TR4D. High Feed Radius Mill. New Product News No. H1901A TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel

More information

B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS

B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN

More information

ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加

ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加 超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm

More information

VFX for High Efficiency Milling of Titanium Alloys

VFX for High Efficiency Milling of Titanium Alloys TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection

More information

Indexable Milling. Indexable Milling Introduction... E2 E19. Face Mills...F1 F Shoulder Mills...G1 G61. Helical Mills...

Indexable Milling. Indexable Milling Introduction... E2 E19. Face Mills...F1 F Shoulder Mills...G1 G61. Helical Mills... Indexable Milling Indexable Milling Introduction... E2E19 Face Mills...F1F60 90 Shoulder Mills...G1G61 elical Mills...111 Slotting Mills...I1I19 Copy Mills... J1J98 E1 EW PRODUCTS Our latest metalcutting

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

Excellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering

Excellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed

More information

New Tool Ref Length (mm) Body Length (mm)

New Tool Ref Length (mm) Body Length (mm) 4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill

More information

CTR Counterboring Tools

CTR Counterboring Tools CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land

More information

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW!

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW! Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%

More information

Drilling Depth ( L / D) Content

Drilling Depth ( L / D) Content Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole

More information

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

More information

3 Cutting Edges Use GBA for Grooving

3 Cutting Edges Use GBA for Grooving CP188-E 3 Cutting Edges Use G for Grooving Wide Product Lineup PVD Coated for Steel / PR905 Smooth Chip evacuation due to no interference on the chip pocket External Grooving Internal Grooving G-MY New

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number *Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose

More information

Extremely small dimensions, extremely high precision.

Extremely small dimensions, extremely high precision. Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance

More information

WIDIA Victory Shoulder Mills VSM Series ADVANCES 2015 Metric

WIDIA Victory Shoulder Mills VSM Series ADVANCES 2015 Metric WIDIA Victory Shoulder Mills VSM490-15 Series ADVANCES 2015 Metric Double-Sided Shoulder Mill VSM490-15 WIDIA Victory shoulder milling series (VSM series) is especially engineered to achieve excellent

More information

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies

More information

Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.

Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A. TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter

More information

Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter

Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (

More information

CONTENTS Adaptors Technical Information Brazed Cutters Cutting Parameters Services 62

CONTENTS Adaptors Technical Information Brazed Cutters Cutting Parameters Services 62 CONTENTS 4-19 20-35 Adaptors Technical Information Brazed Cutters Cutting Parameters 36-41 42-53 54-59 60-61 Services 62 Modern machining operations need to rely on the optimization of the production processes:

More information

New Mini Tools Inch 2016

New Mini Tools Inch 2016 TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer

More information

Preview Edition: M370 ADVANCES 2014

Preview Edition: M370 ADVANCES 2014 Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides

More information

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened

More information

Mill 16. kennametal.com

Mill 16. kennametal.com kennametal.com ill 16 2017 ill 16 Face ills for Cast Iron achining. crew-on Clamping Wedge Clamping Features 16 effective cutting edges per insert. Ap1 max = 5,5mm. Coarse, medium and fine pitch cutters.

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

IT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters

IT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral

More information

MHS. Drills for die & mold machining B137A

MHS. Drills for die & mold machining B137A 2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the

More information

S-TAW. Changeable Carbide Insert Type Drill

S-TAW. Changeable Carbide Insert Type Drill News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54

More information

M.A.FORD Where high performance is the standard.

M.A.FORD Where high performance is the standard. For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,

More information

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable

More information

Threading tools to JIS standard

Threading tools to JIS standard Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating

More information

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by

More information

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with

More information

ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL

ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL 90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low

More information

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck

More information

IT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters

IT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral

More information

HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH

HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG

More information

Mill - Thread Inserts and Kits

Mill - Thread Inserts and Kits Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand

More information

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated

More information

A revolution in stainless steel turning

A revolution in stainless steel turning ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic

More information

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr

More information

No: Features Multi-dimensional clamping system : strong clamping force in high speed operation

No: Features Multi-dimensional clamping system : strong clamping force in high speed operation No: 184 Features Multidimensional clamping system : strong clamping force in high speed operation The buffed mirror face of ProX Mill insert demonstrates outstanding chip control and prevents builtup edge.

More information

With over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws

With over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50

More information

HIGH EFFICIENCY VERTICAL MACHINING CENTER

HIGH EFFICIENCY VERTICAL MACHINING CENTER HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and

More information

TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.

TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill. TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter

More information

MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction

MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate

More information

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12. Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.

More information

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened

More information

Burrs.

Burrs. g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &

More information

CERATIZIT designation system

CERATIZIT designation system C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,

More information

January /9. New Cutter with Strong Insert

January /9. New Cutter with Strong Insert 1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed

More information

Contents. Milling. Solid end mills

Contents. Milling. Solid end mills UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect

More information

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173 T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,

More information

Drills Jobber, R40 UNI

Drills Jobber, R40 UNI Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87

More information

VP-1100/1500 Vertical Machining Center

VP-1100/1500 Vertical Machining Center VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring

More information

-treme thread cutting. New. Swiss-Line. Inch

-treme thread cutting. New. Swiss-Line. Inch New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing

More information

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting

More information

MHS TOOLS NEWS B137G. Drills for die & mould machining

MHS TOOLS NEWS B137G. Drills for die & mould machining TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need

More information

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips

More information

max. 1, Ø Plate Kerf Bore Z Hook Ground

max. 1, Ø Plate Kerf Bore Z Hook Ground 11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee

More information

ThreadMill. For Thread Milling

ThreadMill. For Thread Milling ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting

More information

High-performance milling cutter NVDS For up to 15 times faster penetration

High-performance milling cutter NVDS For up to 15 times faster penetration passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range

More information

PCD REAMER. Content PCD Reamers Catalogue. Overview PCD Reamer Production Performance Quality Control Sundi Standard

PCD REAMER. Content PCD Reamers Catalogue. Overview PCD Reamer Production Performance Quality Control Sundi Standard PCD REAMER 2015-2016 PCD Reamers Catalogue Content Email: info@sudicuttingtools.com Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Overview PCD Reamer Production Performance Quality Control Sundi Standard

More information