Table of Contents. Standard Taps

Transcription

1 Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw Sizes--Tap Sets... 8 Standard Taps--High Speed Steel Fractional Sizes--Tap Sets... 9 Standard Taps--High Speed Steel Metric Sizes Straight Flute Standard Taps--High Speed Steel Metric Spiral Point, Plug Style Standard Taps--High Speed Steel Metric Tap Sets Standard Taps--High Speed Steel Spiral Point, Plug Style Standard Taps--High Speed Steel Spiral Point, Bottom Style Standard Taps--Spiral Point Extensions--6 Overall Length, H3, Plug Style Standard Taps--High Speed Steel Spiral Point, Fluteless, GH3, Plug Style Standard Taps--High Speed Steel Pulley Taps Standard Taps--High Speed Steel Nut Taps Standard Taps--High Speed Steel Spiral Fluted, Fast (approx 50 degree) Standard Taps--High Speed Steel Spiral Fluted, Regular (approx 30 degree) Standard Taps--High Speed Steel Metric Spiral Fluted Standard Taps--Jarflos (forming taps), Bottoming Style Standard Taps--Jarflos (forming taps), Plug Style Standard Taps--Metric Jarflos Jarflo Nucon Drills Standard Taps--Pipe Taps, Tapered Standard Taps--Pipe Taps, Tapered, Interrupted Standard Taps--Pipe Taps, Tapered, Small Shank Standard Taps--Pipe Taps, Tapered Small Shank, Interrupted Standard Taps--Pipe Taps, Straight Standard Taps--Pipe Taps, Straight, Small Shank Standard Taps--Screw Thread Insert (STI) Taps, Straight Flute Standard Taps--Screw Thread Insert (STI) Taps, Spiral Point Special Taps Special Taps--Application Data Sheet Special Taps Right or Left Hand from Straight Fluted Blanks Special Taps Jarflos (forming taps) Special Taps-Stub Jarflos for in-die tapping Special Taps Spiral fluted Slow (Regular Spiral), Plug or Bottom and Fast Spiral, Bottom Special Taps Pipe Taper and Straight; Special Projections and Pitch Diameters Special Taps Coolant through Right hand and Left hand Special Taps J80 s Special Taps-Special VHP Jarteks Special Taps--Standard VHP Jarteks Special Taps--Jarhooks, Jartuffs, and Jartaniums--for exotic materials...37 Special Taps--National Extra Fine (NEF)--Plug, Bottom and Taper Special Taps--Left Hand--Plug, Bottom and Taper Special Taps Oversize Straight Flute--Plug, Bottom, Taper Special Taps Oversize Spiral Point--Plug Special Taps--Combination Drill and Tap Twist Drills Nucon 77--MD 31--High Speed Steel MD31 Nucon Sets with Holders... 42

2 Table of Contents (continued) Rotary Files and Burrs Rotary Files--Carbide and High Speed Steel--Precision Machine Ground High Speed Steel--Straight Cylindrical-- Shank High Speed Steel--Cylindrical with Radius End-- Shank High Speed Steel--Ball-- Shank High Speed Steel--Oval-- Shank High Speed Steel--Tree Radius End-- Shank High Speed Steel--Tree Pointed End-- Shank High Speed Steel--Cone-- Shank Carbide--Cylindrical-- Shank Carbide--Cylindrical Radius End-- Shank Carbide--Ball-- Shank Carbide--Oval-- Shank Carbide--Tree Radius End-- Shank Carbide--Cone-- Shank Carbide--Chamfer-- Shank Carbide--Inverted Cone-- Shank Carbide--Flame-- Shank Carbide--Tree Pointed End-- Shank Carbide--Cone Radius End--14 degree angle-- Shank Carbide--1/8 Shank x 1 overall length Carbide-- heads on 1/8 steel shanks Carbide-- heads on 3/16 steel shanks Carbide-- Shank x 2 overall length Carbide--3/32 shanks--1 overall length Carbide--5/32 and 3/16 heads on 1/8 steel shanks Rotary Files--Recommended Speeds Technical / Engineering Information Standard Tap Blank Dimensions Tap Recommendations for Classes 2B and 3B Tap Recommendations for Class 6H Tap Drill Sizes for Unified Inch Screw Threads Tap Drill Sizes for Metric Screw Threads Tap Drill Sizes for JARFLOS (coldforming taps) Tap Drill Sizes for Metric JARFLOS (coldforming taps) Screw Threads Tap Drill Sizes for Screw Thread Insert (STI) Taps Taper Pipe Taps, Thread Limits, Ground Thread Pipe Tap Blank Dimensions Straight Pipe Taps--NPS, Thread Limits, Ground Thread Straight Pipe Taps--NPSF, Thread Limits, Ground Thread Straight Pipe Taps--NPSI, Thread Limits, Ground Thread Tapping Speed Chart Suggested Tap Cutting Speeds... 73

3 Standard Taps--High Speed Steel Machine Screw Sizes Machine screw taps are basically the same as hand taps and can be used wherever hand taps are applicable. The major difference between the two is the method of designation. Machine screw taps are identified by size using numbers #0 through #12 instead of fractions. Each number starting with #0 increases the nominal diameter inches to the next consecutive size. The term hand tap is typically used to denote a fractional tap size. Although the name implies a hand operation, it is found in common use on all production machines. Taps with a taper chamfer are useful in starting a tapped thread square with the part. The plug chamfered tap, however, is the most widely used tap in both hand and production tapping. Tap Description Plug Bottom Taper Price 0 80 H1 2FL H2 2FL H1 2FL H2 2FL H1 2FL H2 2FL H1 2FL H2 2FL H1 3FL H2 3FL H2 3FL H2 2FL H1 3FL H2 3FL H1 3FL H2 3FL H1 2FL H2 2FL H3 2FL H1 3FL H2 3FL H1 3FL H2 3FL H2 2FL H1 3FL H2 3FL H2 3FL H1 2FL H2 2FL H3 2FL H1 3FL H2 3FL H3 3FL H7 3FL /7/2005

4 Standard Taps--High Speed Steel Machine Screw Sizes Tap Description Plug Bottom Taper Price 6 40 H2 2FL H1 3FL H2 3FL H1 2FL H2 2FL H3 2FL H2 3FL H3 3FL H7 3FL H1 4FL H2 4FL H3 4FL H7 4FL H1 4FL H2 4FL H2 2FL H3 2FL H2 3FL H3 3FL H7 3FL H1 4FL H2 4FL H3 4FL H7 4FL H1 2FL H2 2FL H3 2FL H2 3FL H3 3FL H7 3FL H1 4FL H2 4FL H3 4FL H7 4FL H3 4FL H1 4FL H3 4FL /7/2005

5 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes) Tap Description Plug Bottom Taper Price 1/4 20 H2 2FL /4 20 H3 2FL /4 20 H1 3FL /4 20 H2 3FL /4 20 H3 3FL /4 20 H5 3FL /4 20 H1 4FL /4 20 H2 4FL /4 20 H3 4FL /4 20 H5 4FL /4 28 H2 2FL /4 28 H3 2FL /4 28 H1 3FL /4 28 H3 3FL /4 28 H1 4FL /4 28 H2 4FL /4 28 H3 4FL /4 28 H4 4FL /16 18 H3 2FL /16 18 H3 3FL /16 18 H5 3FL /16 18 H1 4FL /16 18 H2 4FL /16 18 H3 4FL /16 18 H5 4FL /16 24 H3 3FL /16 24 H1 4FL /16 24 H2 4FL /16 24 H3 4FL /16 24 H4 4FL /8 16 H1 3FL /8 16 H2 3FL /8 16 H3 3FL /8 16 H5 3FL /8 16 H1 4FL /8 16 H2 4FL /8 16 H3 4FL /8 16 H5 4FL /8 24 H3 3FL /8 24 H1 4FL /8 24 H2 4FL /8 24 H3 4FL /8 24 H4 4FL /7/2005

6 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes) Tap Description Plug Bottom Taper Price 7/16 14 H3 3FL /16 14 H1 4FL /16 14 H2 4FL /16 14 H3 4FL /16 14 H5 4FL /16 20 H3 3FL /16 20 H1 4FL /16 20 H3 4FL /16 20 H5 4FL /2 13 H2 3FL /2 13 H3 3FL /2 13 H1 4FL /2 13 H2 4FL /2 13 H3 4FL /2 13 H5 4FL /2 20 H3 3FL /2 20 H1 4FL /2 20 H2 4FL /2 20 H3 4FL /2 20 H5 4FL /16 12 H3 4FL /16 12 H5 4FL /16 18 H2 4FL /16 18 H3 4FL /16 18 H5 4FL /8 11 H2 4FL /8 11 H3 4FL /8 11 H5 4FL /8 18 H2 4FL /8 18 H3 4FL /8 18 H5 4FL /16 11 H3 4FL /16 16 H3 4FL /4 10 H1 4FL /4 10 H2 4FL /4 10 H3 4FL /4 10 H5 4FL /7/2005

7 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes) Tap Description Plug Bottom Taper Price 3/4 16 H1 4FL /4 16 H2 4FL /4 16 H3 4FL /4 16 H4 4FL /4 16 H5 4FL /8 9 H2 4FL /8 9 H4 4FL /8 9 H6 4FL /8 14 H2 4FL /8 14 H4 4FL /8 14 H6 4FL H4 4FL H6 4FL H4 4FL H2 4FL H4 4FL /8 7 H4 4FL /8 12 H4 4FL /4 7 H4 4FL /4 12 H4 6FL /8 6 H4 4FL /8 12 H4 6FL /2 6 H4 4FL /2 12 H4 6FL /7/2005

8 Standard Taps--High Speed Steel Machine Screw Sizes--Tap Sets Tap Description Part Number Price 0 80 H1 2FL H1 2FL H1 2FL H1 3FL H2 3FL H2 3FL H2 3FL H2 3FL H1 3FL H2 3FL H2 3FL H1 3FL H2 3FL H1 3FL H2 3FL H3 3FL H2 3FL H1 4FL H2 4FL H3 4FL H2 4FL H1 4FL H2 4FL H3 4FL H1 4FL H2 4FL H3 4FL H3 4FL H3 4FL /7/2005

9 Standard Taps--High Speed Steel Fractional Sizes--Tap Sets Tap Description Part Number Price 1/4 20 H1 4FL /4 20 H2 4FL /4 20 H3 4FL /4 28 H2 4FL /4 28 H3 4FL /16 18 H2 4FL /16 18 H3 4FL /16 24 H2 4FL /16 24 H3 4FL /8 16 H1 4FL /8 16 H2 4FL /8 16 H3 4FL /8 24 H2 4FL /8 24 H3 4FL /16 14 H3 4FL /16 20 H3 4FL /2 13 H3 4FL /2 20 H3 4FL /16 12 H3 4FL /16 18 H3 4FL Tap Description Part Number Price 5/8 11 H3 4FL /8 18 H3 4FL /16 11 H3 4FL /16 16 H3 4FL /4 10 H3 4FL /4 16 H3 4FL /8 9 H4 4FL /8 14 H4 4FL H4 4FL H4 4FL H4 4FL /8 7 H4 4FL /8 12 H4 4FL /4 7 H4 4FL /4 12 H4 6FL /8 16 H4 4FL /8 12 H4 6FL /2 6 H4 4FL /2 12 H4 6FL /7/2005

10 Standard Taps--High Speed Steel Metric Sizes Straight Flute Tap Description Plug Bottom Taper Price M1.6 X 0.35 D3 2FL M2.0 X 0.40 D3 3FL M2.2 X 0.45 D3 3FL M2.5 X 0.45 D3 3FL M3.0 X 0.50 D3 3FL M3.5 X 0.60 D4 3FL M4.0 X 0.70 D4 4FL M4.5 X 0.75 D4 4FL M5.0 X 0.80 D4 4FL M6.0 X 1.00 D5 4FL M7.0 X 1.00 D5 4FL M8.0 X 1.25 D5 4FL M9.0 X 1.25 D5 4FL M10 X 1.50 D6 4FL M11 X 1.50 D6 4FL M12 X 1.75 D6 4FL M14 X 2.00 D7 4FL M16 X 2.00 D7 4FL M18 X 2.50 D7 4FL M20 X 2.50 D7 4FL M22 X 2.50 D7 4FL M24 X 3.00 D8 4FL M27 X 3.00 D8 4FL M30 X 3.50 D9 4FL M33 X 3.50 D9 4FL M36 X 4.00 D9 4FL /7/2005

11 Standard Taps--High Speed Steel Metric Spiral Point, Plug Style Tap Description Part Number Price M1.6 X 0.35 D3 2FL M2.0 X 0.40 D3 2FL M2.5 X 0.45 D3 2FL M3.0 X 0.50 D3 2FL M3.5 X 0.60 D4 2FL M4.0 X 0.70 D4 2FL M5.0 X 0.80 D4 2FL M6.0 X 1.00 D5 2FL M7.0 X 1.00 D5 2FL M8.0 X 1.25 D5 2FL M10 X 1.50 D6 3FL M12 X 1.75 D6 3FL M14 X 2.00 D7 3FL M16 X 2.00 D7 3FL M18 X 2.50 D7 3FL M20 X 2.50 D7 3FL Standard Taps--High Speed Steel Metric Tap Sets Tap Description Part Number Price M1.6 X 0.35 D3 2FL M2.0 X 0.40 D3 3FL M2.5 X 0.45 D3 3FL M3.0 X 0.50 D3 3FL M3.5 X 0.60 D4 3FL M4.0 X 0.70 D4 4FL M5.0 X 0.80 D4 4FL M6.0 X 1.00 D5 4FL M8.0 X 1.25 D5 4FL M10 X 1.50 D6 4FL M12 X 1.75 D6 4FL M14 X 2.00 D7 4FL M16 X 2.00 D7 4FL M20 X 2.50 D7 4FL M24 X 3.00 D8 4FL M30 X 3.50 D9 4FL M36 X 4.00 D9 4FL /7/2005

12 Standard Taps--High Speed Steel Spiral Point, Plug Style Spiral pointed taps are recommended for machine tapping of through or open holes and for blind holes with sufficient chip-room below the full threads required. As a result of the spiral point grind, the chips are forced ahead of the tap with the least amount of resistance to the thrust. This feature makes it possible to build additional strength into the tap and allows a better flow of lubricant to the cutting edges. The use of the spiral pointed tap prevents chips from packing in the flutes or wedging between the flanks and the work, a major cause of breakage particularly in the small size taps. Generally, spiral pointed taps can be run at higher speeds as they require less torque to drive and are recommended for all materials except the abrasive group such as cast-iron and plastics. Bottoming spiral pointed taps are similar to the plug spiral pointed tap except for the style of chamfer. This style of tap tends to form a tightly curled broken chip, thus making chip removal easier. Bottoming spiral pointed taps can be used for blind hole tapping where sufficient space can be provided at the bottom of the hole to accommodate chips. Tap Description Part Number Price 0 80 H1 2FL H2 2FL H1 2FL H2 2FL H1 2FL H2 2FL H1 2FL H2 2FL H5 2FL H1 2FL H2 2FL H1 2FL H2 2FL H1 2FL H2 2FL H2 2FL H1 2FL H2 2FL H3 2FL H5 2FL H1 2FL H2 2FL H1 2FL H2 2FL H3 2FL H2 2FL /7/2005

13 Standard Taps--High Speed Steel Spiral Point, Plug Style Tap Description Part Number Price 6 32 H1 2FL H2 2FL H3 2FL H5 2FL H7 2FL H1 2FL H2 2FL H1 2FL H2 2FL H3 2FL H5 2FL H7 2FL H1 2FL H2 2FL H1 2FL H2 2FL H3 2FL H5 2FL H7 2FL H1 2FL H2 2FL H3 2FL H5 2FL H7 2FL H1 2FL H3 2FL H3 2FL /7/2005

14 Standard Taps--High Speed Steel Spiral Point, Plug Style Tap Description Part Number Price 1/4 20 H1 2FL /4 20 H2 2FL /4 20 H3 2FL /4 20 H5 2FL /4 20 H3 3FL /4 20 H5 3FL /4 28 H1 2FL /4 28 H2 2FL /4 28 H3 2FL /4 28 H4 2FL /4 28 H2 3FL /4 28 H3 3FL /4 28 H4 3FL /16 18 H1 2FL /16 18 H2 2FL /16 18 H3 2FL /16 18 H5 2FL /16 18 H3 3FL /16 18 H5 3FL /16 24 H1 2FL /16 24 H2 2FL /16 24 H3 2FL /16 24 H4 2FL /16 24 H2 3FL /16 24 H4 3FL /8 16 H1 3FL /8 16 H2 3FL /8 16 H3 3FL /8 16 H5 3FL /8 24 H1 3FL /8 24 H2 3FL /8 24 H3 3FL /8 24 H4 3FL /7/2005

15 Standard Taps--High Speed Steel Spiral Point, Plug Style Tap Description Part Number Price 7/16 14 H2 3FL /16 14 H3 3FL /16 14 H5 3FL /16 20 H2 3FL /16 20 H3 3FL /16 20 H5 3FL /2 13 H1 3FL /2 13 H2 3FL /2 13 H3 3FL /2 13 H5 3FL /2 20 H1 3FL /2 20 H2 3FL /2 20 H3 3FL /2 20 H5 3FL /16 18 H3 3FL /8 11 H2 3FL /8 11 H3 3FL /8 11 H5 3FL /8 18 H3 3FL /4 10 H3 3FL /4 10 H5 3FL /8 9 H3 3FL H3 3FL /7/2005

16 Standard Taps--High Speed Steel Spiral Point, Bottom Style Tap Description Part Number Price 0 80 H1 2FL H2 2FL H2 2FL H2 2FL H1 2FL H2 2FL H2 2FL H2 2FL H2 2FL H1 2FL H2 2FL H2 2FL H2 2FL H1 2FL H2 2FL H3 2FL H7 2FL H2 2FL H1 2FL H2 2FL H3 2FL H7 2FL H2 2FL H1 2FL H2 2FL H3 2FL H1 2FL H2 2FL H3 2FL H3 2FL /4 20 H3 2FL /4 28 H3 2FL /16 18 H3 2FL /16 24 H3 2FL /8 16 H3 3FL /8 24 H3 3FL /16 14 H3 3FL /16 20 H3 3FL /2 13 H3 3FL /2 20 H3 3FL /7/2005

17 Standard Taps--High Speed Steel Spiral Point, Fluteless, GH3, Plug Fluteless spiral pointed taps are recommended for production tapping of through holes in thin sections not greater than one diameter in thickness. The fluteless spiral pointed tap was developed to produce a tap of maximum strength it has spiral points only; the tap body is threaded without flutes. This design of tap offers maximum rigidity required to minimize breakage caused by misalignment. These taps have proven very successful in the tapping of sheet metal. Tap Description Part Number Price 4 40 H H H H H H H /4 20 H /16 18 H3 2/sppt /16 18 H3 3/sppt /8 16 H /16 14 H /2 13 H Standard Taps--Spiral Point Extensions--6 Overall Length, H3, Plug Style High Speed Steel Tap Description Part Number Price 6 32 H3 2FL H3 2FL H3 2FL /4 20 H3 2FL /16 18 H3 2FL /8 16 H3 3FL /7/2005

18 Standard Taps--High Speed Steel Pulley Taps Pulley taps, as the name implies, were originally designed for tapping oil and set screw holes in the hubs of pulleys which could not be reached with ordinary hand taps. Today, these taps are primarily used as an extension tap. The major and pitch diameters are the same as hand taps but feature longer shanks which are of the same major diameter as the threaded section. Tap Description EDP Number Price 1/4 20 H3 4FL 6"OAL /4 20 H3 4FL 8"OAL /16 18 H3 4FL 6"OAL /16 18 H3 4FL 8" OAL /8 16 H3 4FL 6" OAL /8 16 H3 4FL 8" OAL /8 16 H3 4FL 10" OAL /16 14 H3 4FL 6" OAL /16 14 H3 4FL 8" OAL /2 13 H3 4FL 6" OAL /2 13 H3 4FL 8" OAL /2 13 H3 4FL 10" OAL /2 13 H3 4FL 12" OAL /8 11 H3 4FL 6" OAL /8 11 H3 4FL 8" OAL /8 11 H3 4FL 10" OAL /8 11 H3 4FL 12" OAL /4 10 H3 4FL 10" OAL /4 10 H3 4FL 12" OAL Standard Taps--High Speed Steel Nut Taps Nut taps are generally used by nut manufacturers for production tapping on nut tapping machines. Their long small diameter shanks permit the tapped nuts to accumulate on the shank without reversing the tap. These taps are provided with long chamfers to distribute the cutting action efficiently for this type of operation. Tap Description EDP Number Price 1/4 20 H3 5" OAL /16 18 H3 5 1/2" OAL /8 16 H3 6" OAL /2 13 H3 7" OAL /7/2005

19 Standard Taps--High Speed Steel Spiral Fluted, Fast (approx 50 degree) Spiral fluted taps are made with the flutes ground helically along the entire thread length with the same hand as the threads. Recommended for machine tapping deep blind holes, the cutting action forces the chips out of the hole similar to a drill. This cutting action minimizes friction and prevents chips from packing in the flutes at the bottom of the hole. Spiral fluted taps are also commonly used when tapping a hole that has an interrupted face as produced by a keyway or spline so that the helical lands of the tap will span or bridge the interruptions. Tap Description Plug Bottom Price 3 48 H2 2FL H2 2FL H2 2FL H1 2FL H2 2FL H3 2FL H2 3FL H3 3FL H1 3FL H3 3FL H1 3FL H2 3FL H3 3FL H3 3FL /4 20 H2 3FL /4 20 H3 3FL /4 20 H5 3FL /4 28 H3 3FL /4 28 H4 3FL /16 18 H2 3FL /16 18 H3 3FL /16 18 H5 3FL /16 24 H3 3FL /16 24 H4 3FL /8 16 H2 3FL /8 16 H3 3FL /8 16 H5 3FL /8 24 H1 3FL /8 24 H3 3FL /8 24 H4 3FL /16 14 H2 3FL /16 14 H3 3FL /16 14 H5 3FL /16 20 H3 3FL /16 20 H5 3FL /2 13 H2 3FL /2 13 H3 3FL /2 13 H5 3FL /2 20 H1 3FL /2 20 H3 3FL /2 20 H5 3FL /8 11 H3 4FL /4 10 H3 4FL /7/2005

20 Standard Taps--High Speed Steel Spiral Fluted, Regular (approx 30 degree) Tap Description Plug Bottom Price 4 40 H2 2FL H2 2FL H3 2FL H3 2FL H3 2FL H3 2FL /4 20 H3 2FL /4 20 H3 3FL /4 28 H3 2FL /4 28 H3 3FL /16 18 H3 3FL /16 24 H3 3FL /8 16 H3 3FL /8 24 H3 3FL /16 14 H3 3FL /16 20 H3 3FL /2 13 H3 3FL /2 20 H3 3FL Standard Taps--High Speed Steel Metric Spiral Fluted Tap Description Plug Bottom Price M2.0 X 0.40 D3 2FL M2.5 X 0.45 D3 2FL M3.0 X 0.50 D3 2FL M3.5 X 0.60 D4 3FL M4.0 X 0.70 D4 3FL M5.0 X 0.80 D4 3FL M6.0 X 1.00 D5 3FL M7.0 X 1.00 D5 3FL M8.0 X 1.25 D5 3FL M10 X 1.50 D6 3FL M12 X 1.75 D6 3FL M14 X 2.00 D7 3FL M16 X 2.00 D7 3FL M18 X 2.50 D7 3FL /7/2005

21 Standard Taps--Jarflos (forming taps), Bottoming Style Jarflo is the premier name in the expanding world of form tapping. It has been the vanguard of innovation for the past 40 years. Cold form tapping is an evolving technology. Jarflos provide consistently higher production rates, longer tool life and lower torque. That is why Jarflo has remained the leading name in cold form tapping. Tap Size H2 H3 H4 H5 H6 H7 H8 H9 H10 Price / / / / / / / / / / / / / / / / /7/2005

22 Standard Taps--Jarflos (forming taps), Plug Style Tap Size H3 H4 H5 H6 H7 H8 H9 H10 Price / / / / / / / / / / / / / / / / Standard Taps--Metric Jarflos Tap Description Bottom Plug Price M2.0 X 0.40 D M2.5 X 0.45 D M3.0 X 0.50 D M3.5 X 0.60 D M4.0 X 0.70 D M5.0 X 0.80 D M6.0 X 1.00 D M8.0 X 1.25 D M10 X 1.50 D M12 X 1.75 D /7/2005

23 Jarflo Nucon Drills Size for 65% to 75% thread Tap PD Drill Part Overall Flute Unit Unit Price Size Limits Diameter Number Length Length Price with TiN 2 56 H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ H /2 7/ /4 20 H /2 1 3/ /4 28 H /2 1 3/ /16 18 H /2 1 3/ /16 24 H /2 1 3/ /8 16 H /2 1 3/ /8 24 H /2 1 3/ /16 14 H /2 1 3/ /16 20 H /2 1 3/ /2 13 H /2 1 3/ /2 20 H /2 1 3/ Metric Sizes M3 X 0.5 D /2 7/ M3.5 X 0.6 D /2 7/ M4 X 0.7 D /2 7/ M5 X 0.8 D /2 1 3/ M6 X 1.0 D /2 1 3/ M7 X 1.0 D /2 1 3/ M8 X 1.25 D /2 1 3/ M10 X 1.5 D /2 1 3/ M12 X 1.5 D /2 1 3/ M12 X 1.75 D /2 1 3/ Reasons for using Jarflo Nucons: Eliminates the need for center drilling. Special point geometry prevents the drill from walking Eliminates the need for reaming in many applications. The unique geometry prevents the drill from cutting oversized holes. These close tolerance drills are ideal for the critical demands of using Jarflos. Drill is specifically designed for ductile material. Aggressive flute for rapid chip removal. Off the shelf delivery available. Inventory is maintained for all sizes listed above. Other sizes available upon request. Highly specialized drill at standard drill pricing. 23 9/7/2005

24 Standard Taps--Pipe Taps, Tapered Taper pipe taps are used principally for tapping pipe fittings to produce a tight threaded joint preventing the escape of a gas or liquid. These taps are thread ground on a taper at the rate of 3/4" per foot. Dryseal pipe taps are used to produce pressure tight joints for liquids and gases without the use of a sealing compound. They have the same general thread dimensions as the N.P.T. threads, but differ in the amount of truncation at the crest and root. The amount of truncation is designed to produce a metal to metal contact or interference at the crests and roots of the mating parts. When the joint is completely made up, the flanks and flats produce a leak proof assembly. Straight pipe taps are similar in design to taper pipe taps except for their straight thread. Straight pipe taps are used mainly for tapping low pressure fittings, electrical parts and locknuts. Tap Size NPT NPTF Price 1/ / / / / / / /4 11 1/ /2 11 1/ / Standard Taps--Pipe Taps, Tapered, Interrupted Tap Size NPT NPTF Price 1/ / / / / / /4 11 1/ /2 11 1/ / /7/2005

25 Standard Taps--Pipe Taps, Tapered, Small Shank For many years pipe taps have been manufactured with standard stub shanks. These shanks in many instances make it difficult to correctly chuck these pipe taps in tapping attachments. To overcome this problem, Jarvis furnishes pipe taps with small shanks (hand tap shank dimensions) in various American Standard Pipe forms. Tap Size NPT NPTF Price 1/ / / / Standard Taps--Pipe Taps, Tapered Small Shank, Interrupted Tap Size NPT NPTF Price 1/ / / / /7/2005

26 Standard Taps--Pipe Taps, Straight Tap Size NPS NPSF Price 1/ / / / / / Standard Taps--Pipe Taps, Straight, Small Shank Tap Size NPS NPSF Price 1/ / / / /7/2005

27 Standard Taps--Screw Thread Insert (STI) Taps, Straight Flute STI (screw thread insert) taps are oversize so that the thread they produce will accept a helical wire screw thread insert fo the same size and pitch. Tap Description Plug Bottom Price 4 40 H1 3FL H2 3FL H1 3FL H2 3FL H2 3FL H3 3FL H1 3FL H2 3FL H2 3FL H3 3FL H2 3FL H3 3FL H2 3FL H3 3FL H2 3FL H3 3FL /4 20 H2 3FL /4 20 H3 3FL /4 28 H2 3FL /4 28 H3 3FL /16 18 H3 4FL /16 18 H4 4FL /16 24 H2 4FL /16 24 H4 4FL /8 16 H3 4FL /8 16 H4 4FL /8 24 H2 4FL /8 24 H3 4FL /16 14 H3 4FL /16 14 H4 4FL /16 20 H3 4FL /16 20 H4 4FL /2 13 H3 4FL /2 13 H4 4FL /2 20 H3 4FL /2 20 H4 4FL /7/2005

28 Standard Taps--Screw Thread Insert (STI) Taps, Spiral Point Tap Description Plug Price 4 40 H1 2FL H2 2FL H1 2FL H2 2FL H2 2FL H3 2FL H1 2FL H2 2FL H2 2FL H3 2FL H2 2FL H3 2FL H2 2FL H3 2FL H2 2FL H3 2FL /4 20 H2 2FL /4 20 H3 2FL /4 28 H2 2FL /4 28 H3 2FL /16 18 H3 3FL /16 18 H4 3FL /16 24 H2 3FL /16 24 H3 3FL /8 16 H3 3FL /8 16 H4 3FL /8 24 H2 3FL /8 24 H3 3FL /7/2005

29 Special Taps--Application Data Sheet Please provide as much information as possible when ordering Special Taps In order that Jarvis may render an intelligent and efficient service to you, it is important that complete information be furnished. All requests for Special Taps should state purchase order number and quantity, and include information pertaining to that specific application. If it is a repeat order, please refer to the previous order number. When ordering special taps, the following information should be given. 1. Type of Tap (Hand, Pipe, Pulley, etc.) 2. Direction of cut (Right or Left Hand) 3. General Dimensions of Tap (a) Overall Length (b) Thread Length (c) Shank Diameter (d) Chamfer Length NOTE: If no general dimensions are given for special taps having American National Thread Form, they will be made to dimensions shown in Table 302, except fine pitch taps over 1" which qualify for Table Flutes: (a) Number of Flutes (b) Straight or Helical (c) If Helical, state hand of helix 5. Threads: (a) Form (American National, American Standard Straight Pipe, etc.) (b) Nominal Size (c) Threads per Inch (d) Single or Multiple Lead 6. Projection (for Taper Pipe Taps) 7. Pitch Diameter Limits of Tap or Class of Fit Required 8. Pitch Diameter Limits of Gage (a) Go (b) No Go 9. Material to be tapped (a) Material (b) Hardness (c) Annealed or Heat Treated (d) Specification Number 10. Hole: (a) Blind or Through (For blind holes, give clearance beyond the thread depth.) (b) Depth (c) Wall thickness of part, if less than 1/2 inch 11. Part print, if available 12. Type of Tapping Machine and Coolant used. ACME AND MODIFIED SQUARE THREAD TAPS For design and quotation purposes the following information is essential: 1. Sketch or Part Print 2. Type of thread (General Purpose Acme; Centralizing Acme; Stub Acme; or Modified Square 3. Size and Pitch (Basic major diameter and threads per inch.) 4. Right and Left Hand Thread 5. Lead, if other than single 6. Pitch diameter of Go and No Go gages 7. Class of thread: 2G (Class 2G furnished unless otherwise specified), 3G, or 4G for General Purpose Acme; 2C, 3C, 4C, 5C or 6C for Centralizing Acme 8. Material to be tapped 9. Type of tapped hole: (a) Through Hole-Give overall thickness of part and length of thread (b) Counterbored Hole Give overall thickness of part, length of threaded portion, and advise which end tap will enter. (c) Blind Hole Give length of thread and length of clearance at bottom of hole 10. Bore Size (Minor diameter of tapped hole) FOR PRICING, CALL THE FACTORY 29

30 Special Taps Right or Left Hand from Straight Fluted Blanks 1 inch diameter and smaller including metric sizes Max Size Min Sppt Size Pitch (mm) Pitch Add M M M M M M M M M /4 80 M /16 80 M7, M /8 80 M9, M /16 80 M /2 80 M /16 64 M /8 64 M /16 64 M / /16 64 M /8 64 M /16 64 M " 64 M When Ordering Special Taps Please refer to a previous order or give the Jarvis part number to speed up processing. For new items or first time buys, please provide a complete description of the tap size and threads per inch, right hand or left hand, tap dimensions, number of flutes, pitch diameter limits or class of fit or gage limits, material to be tapped, hole specifications (blind or through, depth, thread depth), provide tap and/or part prints when available. 30 9/7/2005

31 Special Taps Right or Left Hand from Straight Fluted Blanks Larger than 1 inch diameter including metric sizes Max Size Min Size Pitch (mm) Pitch Blank /16 13 M Long /16 55 M Short /8 13 Long /8 55 Short /16 13 M Long /16 55 M Short /4 13 Long /4 55 Short /16 13 M Long /16 55 M Short /8 13 Long /8 55 Short /16 13 M Long /16 55 M Short /2 13 M Long /2 55 M Short /8 9 M Long /8 55 M Short /4 9 M Long /4 55 M Short /8 9 M Long /8 55 M Short M Long M Short /8 9 Long /8 47 Short /4 9 M Long /4 47 M Short /8 9 Long /8 47 Short /2 9 Long /2 47 Short /8 9 M Long /8 47 M Short /4 9 Long /4 47 Short /8 9 M Long /8 47 M Short Long Short /7/2005

32 Special Taps Jarflos (forming taps) Max Size Min Size Pitch (mm) Pitch M M M M M M M M M /4 80 M /16 80 M /8 80 M /16 80 M /2 80 M /16 64 M /8 64 M /16 64 M / /16 64 M /8 64 M /16 64 M " 64 M /16 13 M Long 5 1/8 overall length 1 1/16 55 M Short 4 overall length 1 1/ Long 5 7/16 overall length 1 1/ Short 4 overall length 1 3/16 13 M Long 5 7/16 overall length 1 3/16 55 M Short 4 overall length 1 1/ Long 5 overall length 1 1/ Short 4 overall length 1 5/16 13 M Long 5 overall length 1 5/16 55 M Short 4 overall length 1 3/ Long 6 1/16 overall length 1 3/ Short 4 overall length 1 7/16 13 M Long 6 1/16 overall length 1 7/16 55 M Short 4 overall length 1 1/2 13 M Long 6 3/8 overall length 1 1/2 55 M Short 4 overall length 32 9/7/2005

33 Special Taps-Stub Jarflos for in-die tapping Tap Jarvis Part Unit Size Number Price 2-56 H H H5 (2B) H H H H5 (2B) H H H5 (2B) H H H H6 (2B) H H H H /4-20 H /4-28 H /16-18 H Tap Jarvis Part Unit Size Number Price M2 X 0.4 D M2.5 X 0.45 D M3 X 0.5 D M3 X 0.5 D5 (6H) M3 X 0.5 D M3.5 X 0.6 D6 (6H) M3.5 X 0.6 D M4 X 0.7 D M4 X 0.7 D M4 X 0.7 D6 (6H) M5 X 0.8 D M6 X 1.0 D M8 X 1.25 D Special Stub Jarflos Quantities #2 (M2) thru (M6) and #12 (M5) 5/16 (M8) /7/2005

34 Special Taps Spiral fluted Slow (Regular Spiral), Plug or Bottom and Fast Spiral, Bottom Max Size Min Size Pitch (mm) Pitch M M M M M M /4 80 M /16 80 M /8 80 M /16 80 M /2 80 M /16 64 M /8 64 M /16 64 M / /8 64 M " 64 M Special Taps Pipe Taper and Straight; Special Projections and Pitch Diameters made from Fluted Blanks Tap Size Std Proj Min Proj / / / / / / / /4 11 1/ /2 11 1/ / /7/2005

35 Special Taps Coolant through Right hand and Left hand Tap Max Metric Min Size Pitch Size Pitch /4 80 M /16 80 M /8 80 M / /2 80 M /16 64 M /8 64 M / /8 48 M M / / / Special Taps J80 s Tap Size Semi Bottom Bottom Price 1/4 20 NC H5 4FL /4 20 NC H3 3FL /4 28 NF H4 4FL /4 28 NF H3 3FL /16 18 NC H5 4FL /16 18 NC H3 3FL /16 24 NF H4 4FL /16 24 NF H3 3FL /8 16 NC H5 4FL /8 16 NC H3 3FL /8 24 NF H4 4FL /8 24 NF H3 3FL /16 14 NC H5 4FL /16 20 NF H3 4FL /2 13 NC H5 4FL /2 20 NF H3 4FL /16 12 NC H5 4FL /16 18 NF H3 4FL /8 11 NC H5 4FL /8 18 NF H4 4FL /4 10 NC H5 4FL /4 16 NF H4 4FL /7/2005

36 Special Taps--Standard VHP Jarteks Spiral Pointed and Spiral Fluted stocked with TiN Coating Tap Size H2 H3 H4 H5 H6 H7 H8 H9 Price FL FL FL FL FL FL FL /4 20 3FL /4 28 3FL / FL / FL /8 16 3FL /8 24 3FL / FL / FL /2 13 3FL /2 20 3FL / FL /8 11 3FL /8 18 3FL /4 10 3FL /4 16 3FL Spiral Fluted SPFL SPFL /4 20 3SPFL /4 28 3SPFL / SPFL / SPFL /8 16 3SPFL /8 24 3SPFL Special Taps-Special VHP Jarteks Tap Metric Size Equiv M M M M /4 M /16 M /8 M / /2 M /16 M /8 M / /7/2005

37 Special Taps--JARHOOK for Soft A286, Aluminum, Stainless Steel--Spiral Point Plugs for Through Holes Tap Unit Size Pitch Flutes H3 H4 H5 H6 H7 H8 H9 H10 Price / / / / / / / / Special Taps--JARTUFF for Inconel, Waspaloy, Hard A286--Spiral Point Plugs for Through Holes Tap Unit Size Pitch Flutes H3 H4 H5 H6 H7 H8 H9 H10 Price / / / / / / / / Special Taps--JARTANIUM for Titanium Alloys--Spiral Point Plugs for Through Holes Tap Unit Size Pitch Flutes H3 H4 H5 H6 H7 H8 H9 H10 Price / / / / / / / / /7/2005

38 Special Taps--Left Hand--Plug, Bottom and Taper Tap Size Flutes Plug Bottom Taper Unit Price 6-32 H H H H /4-20 H /4-28 H /16-18 H /16-24 H /8-16 H /8-24 H /16-14 H /16-20 H /2-13 H /2-20 H /16-12 H /16-18 H /8-11 H /18 18 H /4-10 H /4-16 H /8-9 H /8-14 H H H H Special Taps--National Extra Fine (NEF)--Plug, Bottom and Taper Tap Size Flutes Plug Bottom Taper Unit Price H /4-32 H /16-32 H /8-32 H /16-28 H /2-28 H /16-24 H /8-24 H /16-24 H /4-20 H /16-20 H /8-20 H /16-20 H H /7/2005

39 Special Taps Oversize Straight Flute--Plug, Bottom, Taper Tap Size Flutes Plug Bottom Taper Unit Price / / / / / / / / / / / / / / / / Special Taps Oversize Spiral Point--Plug Tap Size Flutes Plug Unit Price / / / / / / / / / / / / /7/2005

40 Special Taps--Combination Drill and Tap Tap Part Overall Thread Drill Size Number Length Length Length Price /8 9/16 1/ /16 5/ /8 3/4 3/ /8 7/8 13/ /8 7/8 13/ /8 7/8 15/ /8 7/8 15/ / /2 15/16 17/ / /2 15/16 17/ / /8 11/ / /8 11/ / /2 1 1/4 13/ / /2 1 1/4 13/ / /8 1 7/ / /8 1 7/ / /4 1 21/32 1 1/ / /4 1 21/32 1 1/ Metrics M3 X /16 3/4 5/ M4 X /8 3/4 3/ M5 X /8 7/8 13/ M6 X /2 15/16 17/ M8 X /8 11/ M10 X /2 3 1/2 1 1/ M12 X /4 1 21/32 1 1/ /7/2005

41 Nucon 77--MD 31--High Speed Steel 2 overall length--118 helical point This is Jarvis revolutionary drill design for numerical controlled drilling. The drill features one overall length across the size range for easy programming. More importantly, this short length construction with the high helix flute can eliminate a reaming operation in many applications. It is made from premium M7 high speed steel for longer tool life. The self-centering, helical point eliminates the need for spot centering. With immediate off-theshelf delivery, Nucon 77 means lower production costs! MD31 Nucons Fractions Drill Dec Size Equiv EDP# Price 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / MD31 Nucons Letters Drill Dec Size Equiv EDP# Price A B C D E F G H I J K L M N O P Q R S T U V W X Y Z /7/2005

42 Nucon 77--MD 31--High Speed Steel 2 overall length--118 helical point MD31 Nucons Wire Sizes Drill Dec Part Size Equiv Number Price MD31 Nucons Wire Sizes Drill Dec Part Size Equiv Number Price MD31 Nucon Sets with Holders EDP# Description Price Fractional 3/32 to 1/ Wire 1 to 43 Inclusive Letter A to Z Inclusive Complete Set All Sizes /7/2005

43 Rotary Files--Carbide and High Speed Steel--Precision Machine Ground Jarvis Ground-from-the-Solid carbide rotary files are without question considered the most durable in lasting qualities of production and are particularly popular in the fields of mold making, tool room and die ship use along with general production. Repeated tests have proved Jarvis carbide rotary files to outlast ordinary files many times over. Their versatility of application ranges from use for any machinable or grindable materials whether plastics or hardened steel. By consistent excellent performance and the usual economy of Jarvis tools, they have become firmly established among those who appreciate quality. Jarvis rotary files can be reground innumerable times without loss of operating efficiency. Our regrinding service is prompt and thorough and enables users of our products to keep their costs at an unusually low level. Standard fluting will be supplied unless otherwise specified. Finer or coarser flutings can be furnished. Diamond fluting is designed for tough and hardened steel dies, forgings, etc., and will powder the chips. Herringbone fluting is used only where superior finishes are required. Diamond, herringbone and chipbreaker flutings may be furnished in fine, standard and coarse. Various carbide burr sets available. 43

44 Rotary Files High Speed Steel--Straight Cylindrical-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2501-A 1/ B 3/ A 5/ / S 3/ File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2502-B 7/ A /7/2005

45 Rotary Files High Speed Steel--Cylindrical with Radius End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2506-A 1/ B 3/ A 5/ / File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2507-S 3/ A 7/ A /7/2005

46 Rotary Files High Speed Steel--Ball-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price /8 1/ /16 3/ /16 5/ /8 3/ Rotary Files High Speed Steel--Oval-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price /16 5/ / A 5/ /8 9/ /7/2005

47 Rotary Files High Speed Steel--Tree Radius End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2526-A 1/8 7/ C 3/ E / A 3/8 7/ B 3/ B 3/8 1 1/ File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price 2528-A / / B POA 2529-A POA 2529-C 1 1/ POA 47 9/7/2005

48 Rotary Files High Speed Steel--Cone-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price A B C E 5/ / / A / Rotary Files High Speed Steel--Tree Pointed End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price / / / /7/2005

49 Rotary Files Carbide--Cylindrical-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-01A 1/ TC-01G 5/ TC-01B 3/ TC TC-02A 5/ TC-02 3/ TC-02B 7/ TC File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC TC-04G TC-04A TC-04B TC Metrics listed are standard cut. 49 9/7/2005

50 Rotary Files Carbide--Cylindrical Radius End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-06A 1/ TC-06G 5/ TC-06B 3/ TC TC-07A 5/ TC-07 3/ TC-07B 7/ TC TC TC-09A Rotary Files Carbide--Ball-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-10 1/8 1/ TC-11 3/16 3/ TC TC-13 5/16 5/ TC-14 3/8 3/ TC-14A 7/16 7/ TC TC TC TC Metrics listed are standard cut. 50 9/7/2005

51 Rotary Files Carbide--Oval-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-21 3/ TC-22 3/ TC-23A 7/ TC TC Metrics listed are standard cut. 51 9/7/2005

52 Rotary Files Carbide--Tree Radius End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-26A 1/ TC-26E TC-27A 3/ TC-27B 7/ TC-28A TC File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-28C TC-29B TC-29A TC-29D Metrics listed are standard cut. 52 9/7/2005

53 Rotary Files Carbide--Cone-- Shank File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC TC-35A TC-35B TC / TC / TC-37A Metrics listed are standard cut. 53 9/7/2005

54 Rotary Files Carbide--Chamfer-- Shank Shape T 60 degree included angle File Head Diameter Standard Cut Coarse Cut Fine Cut Unit Price TC-34T TC-35T 3/ TC-36T TC-37T TC-38T TC-39T Shape W 82 degree included angle File Head Diameter Standard Cut Coarse Cut Fine Cut Unit Price TC-34W TC-35W 3/ TC-36W TC-37W TC-38W TC-39W Shape S 90 degree included angle File Head Diameter Standard Cut Coarse Cut Fine Cut Unit Price TC-34S TC-35S 3/ TC-36S TC-37S TC-38S TC-39T /7/2005

55 Rotary Files Carbide--Inverted Cone-- Shank File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price TC / TC TC TC Rotary Files Carbide--Flame-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price TC-52 5/ TC TC / TC /7/2005

56 Rotary Files Carbide--Tree Pointed End-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC TC-62A 5/ TC-64 3/ TC TC TC TC TC-69A Rotary Files Carbide--Cone Radius End--14 degree angle-- Shank File Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price TC-74A TC-74 5/16 7/ TC-75 3/8 1 1/ TC / TC / TC /7/2005

57 Rotary Files Carbide--1/8 Shank x 1 overall length File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price JA-1* 1/8 9/ JA-2* 3/32 7/ JA-8 1/ JB-1 1/ JC-1* 1/8 9/ JC-2 3/32 7/ JD-1* 1/ JD-2 3/ File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price JE-1* 1/8 7/ JH-1* 1/ JH-2* 1/ JK-1* 1/ JK-2 1/8 5/ JK-6 1/8 3/ JL /8 3/ JL /8 7/ File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price JL-3* 7 1/ JM / JP-1* 1/ JR / JS-1* 10 1/8 3/ JS /32 1/ JU-4* 8 1/8 3/ JU-5 8 1/ J1 Set * Files in the set /7/2005

58 Rotary Files Carbide-- heads on 1/8 steel shanks File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Unit Price JA JB-51 3/ JC JD JE-51 3/ JH JK JL JS J-2 Set Rotary Files Carbide-- heads on 3/16 steel shanks File Included Angle Head Diameter Head Length Standard Cut Fine Cut Unit Price JA JB-55 3/ JC JD-52 7/ JE-52 3/ JH JK JL JS J-3 Set /7/2005

59 Rotary Files Carbide-- Shank x 2 overall length File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-01B 3/ TC TC-06B 3/ TC TC-11 3/ TC File Included Angle Head Diameter Head Length Standard Cut Coarse Cut Fine Cut Metric Unit Price TC-21 3/ TC-26E TC TC-35A TC TC / J-4 Set /7/2005