A New T-BURST Holder for Swiss Turning Applications
|
|
- Peregrine Manning
- 5 years ago
- Views:
Transcription
1 1/15 A New T-BURST Holder or Swiss Turning Applications
2 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST older or swiss turning applications, as wit te current T-BURST older, applies ig pressure coolant rom dual oles directly etween te metal cip and te insert s rake ace or optimum cip control, extended tool lie as well as increased productivity troug iger cutting speeds and eed rates. It is capale o andling coolant pressure up to 140 [ar] maximum and is designed to macine miniature products generally ound in te automotive, medical and aerospace sectors. Te new T-BURST older is ideally suited or macining diicult-to-cut materials suc as stainless steel, titanium, inconel and oter eat resistant alloys. For added convenience, a simple coupling (one-touc excange) system as een introduced. Te ose connecting te macine to te older can e easily and quickly attaced or detaced or replacement. Te coupling system s oses are availale in two lengts: 200 mm and 300 mm depending on te macine s speciications. Features Excellent cip control Increased tool lie under te same cutting conditions Better productivity in iger cutting conditions ecause ot te cutting speed and eed rate are increased Simpliied ose set coupling system or quick older set-up
3 3/15 Swiss turn T-BURST older components Coupling ose Coupling Hole locking screw Plug Housing mounting screw Nozzle tue Unit nozzle ousing Waser Hole locking screw Frontal coolant ole
4 4/15 T-BURST vs normal pressure tool lie test results Tool lie (min.) Normal pressure T-BURST Workpiece material Operation Test coolant pressure Stainless steel Ext, Wet 69 ar V(m/min.) T-BURST vs normal pressure cip reaking test results V=200m/min. ap (mm) Normal pressure T-BURST (mm/rev)
5 5/15 SCACR/L-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 1 4 Fig. 90 SCACR/L 1212 K09-SH-TB CC...T 09T K09-SH-TB Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SCACR/L...TB SO 35080I S-CU-TB PLG 5/16 UNF SS M3x0.5x3-NL T 15 L-W 5/32
6 6/15 SCLCR/L-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 1 4 Fig. 95 SCLCR/L 1212 K09-SH-TB CC...T 09T K09-SH-TB Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SCLCR/L...TB SO 35080I S-CU-TB PLG 5/16 UNF SS M3x0.5x3-NL T 15 L-W 5/32
7 27 max. August /15 SDJCR/L-SH-TB T-BURST older 1 93 Approac angle l1 l SDJCR/L 1212 K11-SH-TB DC...T 11T K11-SH-TB max. Screw Oil-supply unit Plug1 Plug2 Plug3 Wrenc1 Wrenc2 SDJCR/L...TB SO 35080I S-CU-TB PLG 5/16 UNF SS M4x0.7x4-NL SS M3x0.5x3-NL T 15 L-W 5/32
8 60 max. 60 max. August /15 SDNCN-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 4 Fig SDNCN 1212 K11-SH-TB DC...T 11T K11-SH-TB max Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SDNCN...TB SO 35080I S-CU-TB PLG 5/16 UNF SS M2.5x0.45x2.5 SH-TB T 15 L-W 5/32
9 9/15 STGCR/L-SH-TB T-BURST older 91 Approac angle l1 l2 91 STGCR/L 1212 K11-SH-TB TC...T K11-SH-TB Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 STGCR/L...TB SO 25065I S-CU-TB PLG 5/16 UNF SS M3x0.5x3-NL T 7 L-W 5/32
10 44 max. August max. 10/15 SVJBR/L-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 1 Fig. 93 SVJBR/L 1212 K11-SH-TB VB...T K11-SH-TB max. 93 Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SVJBR/L...TB SO 25065I S-CU-TB PLG 5/16 UNF SS M3X0.5X3-NL T 7 L-W 5/32
11 11/15 SVJCR/L-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 1 Fig. 93 SVJCR/L 1212 K11-SH-TB VC...T K11-SH-TB max. 93 Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SVJCR/L...TB SO 25065I S-CU-TB PLG 5/16 UNF SS M3X0.5X3-NL T 7 L-W 5/32
12 70 max. 70 max. August /15 SVVBN-SH-TB T-BURST older Fig.1 Fig.2 Approac angle l1 l2 4 Fig SVVBN 1212 K11-SH-TB VB...T K11-SH-TB max Screw Oil-supply unit Plug1 Plug2 Wrenc1 Wrenc2 SVVBN...TB SO 25065I S-CU-TB PLG 5/16 UNF SS M2.5X0.45X2.5 SH-TB T 7 L-W 5/32
13 13/15 Components Hose BS Fig.1 T L T1 BB Fig.2 L Dimension L(mm) T T1 Max.pressure(Bar) Fig. TB HOSE G1/8-7/16-200BS 200 G1/8"-28 BSPP 7/16"-20 UNF (Flare 37 ) G1/8-7/16-250BS 250 G1/8"-28 BSPP 7/16"-20 UNF (Flare 37 ) G1/8-G1/8-200BB 200 G1/8"-28 BSPP G1/8"-28 BSPP G1/8-G1/8-250BB 250 G1/8"-28 BSPP G1/8"-28 BSPP /16-7/16-200BS 200 5/16"-24 UNF 7/16"-20 UNF (Flare 37 ) /16-G1/8-200BS 200 5/16"-24 UNF G1/8"-28 BSPP Hose is ordered separately Adapter HEX 9/16" G1/8"-28 BSPP 7/16"-20UNF (Flare 37º) 37º Ø4 Ø Adapter is ordered separately Seal waser TB NIPPLE G1/8-7/16 UNF D d w D d w TB COPPER SEAL 1/8" SEAL 5/16" Seal waser is ordered separately
14 14/15 Components Connector "-24UNF SW G1/8"-28 BSPP Ø4 Ø11 25 D D SW TB CONECTOR 5/16"-G1/8" /16"-G1/8" Connector is ordered separately Coupling system L PT 1/8 Hose Connector 5/16-24 UNF Hose Ø5 Ø2.5 T Hose set 19.5 Connector Ø9 Components Dimension L (mm) T Maximum Pressure (Bar) Hose set S-TB HOSE R1/8-COUPLE R1/8-COUPLE R1/8-COUPLE Hose TB HOSE R1/8-COUPLE R1/8-COUPLE Connector TB CONNECTOR 5/16-COUPLE - 5/16"-24 UNF - G1/8-COUPLE - G1/8"-28 BSPP - R1/8-COUPLE - PT 1/8" - Hose set, ose and connector are ordered separately
15 15/15 How to connect coupling system 1. Coupling connection Use wrenc to asten te coupling securely 2. Connection etween ose and coupling Coupling Hose Wile pulling ack tis part o te ose, connect te coupling 3. Connection completed * To disconnect rom te older, proceed in te reverse order as sown aove.
High Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
More informationHigh Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
More informationNew High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
More informationHIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS
HIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS T-Burst; T-Clamp Ultra Plus Series Swiss Type Holders.375".500.625 Traditional Holders.75 1.00 Widths 2mm (.079 ) 3mm (.118") 4mm (.157") 5mm
More informationISCAR s Innovative Clamping System for Rough Turning
TURNING JANUARY Page 1 / 19 ISCAR s Innovative Clamping System or Roug Turning JANUARY Page 2 / 19 Higligts ISCAR as developed an innovative dovetail pocket combined wit a lever clamping mecanism. Te new
More informationT-holder Clamping System
T-older Clamping System Feruary 2014 1/15 Feruary 2014 2/15 T-older clamping system FEATURES Easy to mount insert on te older Enanced rigidity due to doule clamping orce design Staility and longer tool
More informationMANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
More informationChapter Composition of TAC Internal Toolholders
Cast lron Superalloys Stainless Nonerrous Wit cipbreaker Capter Composition o Products are arranged by te series as ollows: Stream Jet Bars General purpose TAC boring toololders In te same series, tey
More informationFestoon systems for cables and hoses
Darwinstraat 10 N 6718 XR Ede Te Neterlands Flexile wit energy! Pone +31 (0)342 403900 Fax +31 (0)342 403912 email info@akapp.com UR www.akapp.com Festoon systems for cales and oses AKAPP Festoon installation
More informationMANN+HUMMEL Filters for Liquids
MANN+HUMML Filters for Liquids MANN+HUMML Industrial Filters Te MANN+HUMML Group is an international company wit its eadquarters in Ludwigsburg, Germany. Te group employs approx. 9500 people worldwide
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationSTERILE CONTAINER SYSTEMS
BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID TK3-1010 TK3-1011 TK3-1012 TK3-1013 540 x 250 =35 mm 540 x 250 =55 mm 540 x 250 =75 mm 540 x 250 =105 mm TK3-1020 TK3-1021 TK3-1022 TK3-1023
More informationinst d u Building materials Approvals Qualities
No. Name 5 3 / 4 1 2 Material 1 Stud Zinc plated steel / A4 ( ) 2 Expansion sleeve A2 / A4 ( ) 3 Waser DIN 125A Zinc plated steel / A4 ( ) T inst t d fix f d u do SW l G No. Name l d nom ef Material 4
More informationA LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
More informationM Tube Fitting Design Standards & Codes
25 M Tube Fitting esign Standards & Codes Make-up 1 1/4 turns advance NUT by 1.25 pitces from finger-tigt position. n 20 TPI, 1.25 pitces travel 1/16 in. (1.5875 mm) make-up distance for Gaugeability M
More informationC-Lube Linear Way MH Linear Way H MH LWH
-Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and
More informationA SH Series. SH Series. 2. Ball slide shape
S Series -5-1.2 S Series 1. eatures (1) ower noise and gentler tone Incorporating a retaining piece and optimizing te circulation pat enables steel ball circulation stability and te prevention of ball
More informationTecnodinAntivibrationMounts
TecnoinAntivibrationMounts Page Page 105 110 105 111 106 111 106 111 107 112 107 112 107 112 108 108 109 109 110 www.tecnoin.com 4 1 0 1 R A P I O A N T I - V I B R A T I O N M O U N T Coe e C Ce e 410108012
More informationA LH Series. LH Series A162. (2) Ball slide shape
Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationNR/NRS. LM Guide B-93. A Technical Descriptions of the Products (Separate) B Product Specifications
R/RS Guide Product Specifications Dimensional Drawing, Dimensional Table s R-R and R-R... s RS-R and RS-R... s R-A and R-A... s RS-A and RS-A... s R- and R-... s RS- and RS-... Standard engt and aximum
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationNew wiper insert series for advanced turning operations
TurnLine Tungaloy Report No. 434-US New wiper insert series or advanced turning operations FW & SW 2 FW & SW TurnLine Only al te surace rougness even at doubled eed rate compared to regular ISO insert
More informationCut-Off Tools. SumiGrip Jr. SumiGrip. SEC-Small Diameter Cut-off Tools SEC-Grooving / Cut-Off Tools
Tools 33 to 46 Tools Tools SumiGrip Jr. SumiGrip SEC-Small Diameter Cut-off Tools SEC- / Tools SEC- Tool Series Selection Guide 34 Introduction of SumiGrip 35 STH Type 36 STS Type 37 WCH Type 38 WCS Type
More informationEXCLUSIVELY AVAILABLE AT KAR IN CANADA
XLUSIVLY VILL T R I PS Series Universal - Plain ack ounting Semi-Steel ody, 3-aw Self-entering s wit 2-Piece ard Reversible aws edium duty 3 pinion design ac cuck is provided wit: 1 set of ard master jaws
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationSTERILE CONTAINER SYSTEMS BASKETS
Meeting Point For Surgery BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID K3-1010 540 x 250 =35 mm K3-1011 540 x 250 =55 mm K3-1012 540 x 250 =75 mm K3-1013 540 x 250 =105 mm K3-1020 480
More informationNSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
More informationOVER 16,500 PRODUCTS.
OVER 16,500 PRODUCTS www.essentracomponents.com WELCOME TO ESSENTRA LOCATED IN 33 COUNTRIES We are global manufacturers and distributors of vital component parts for undreds of markets and tousands of
More informationTest Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
More information2,300 4,266 / 5,605. pneumatic ,580 1,604 2,500 1,395 1,224. Some of the photos may include optional equipment.
Dimension Specification Identification 1.1 Manufacturer Hyundai Hyundai Hyundai 1.2 Manufacturer s type designation 1.3 Drive: electric (attery or mains),diesel,petrol,fuel gas,manual DIESEL DIESEL DIESEL
More informationForklift Trucks Environmentally - Friendly 50/60/70DS-7E
m m Dimension Specification Identification I 1 I 2 1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 Weigts Manufacturer Manufacturer s type designation Drive: electric (attery or mains),diesel,petrol,fuel gas,manual Type
More informationC-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
More informationTorque screwdrivers cn m cn m 181. Torque wrenches N m Nm/ N m 182
Torque tools, Torque testers Overview of torqueing tools Wat type of tool do you need? To ensure safety and productivity, TAHWIE torqueing tools offer you a ig degree of convenience, accurate setting and
More informationATAK Technology Co, LTD.
ATAK Tecnology o, T. recision inear Guieway Stanar Type GA Series Miniature Type GN&G Series atents 1. reface A linear guieway allows a type of linear motion tat utilizes rolling elements suc as balls
More informationFLOTAX FC 1. TABLE OF CONTENT FLOTAX FC. Installation & Maintenance Manual ATEX UNIT SHIPPED WITHOUT OIL
ATEX UNIT SHIPPED WITHOUT OIL 1. TABLE OF CONTENT 1. Table of content... 1 2. Scope... 2 3. Sipping... 2 4. Maintenance... 2 5. Installation... 2 5.1. Mounting position... 2 5.2. Torque arm assembly...
More informationAxial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
More informationHighly Rigid Internal Toolholders with Excellent Chip Evacuation
Keeping te Customer First Tungaloy Report No. 357-E2 TAC Boring Bars Extended Version Higly Rigid Internal Toololders wit Excellent Cip Evacuation TUNGALOY Extensive simulation analysis as enabled Tungaloy
More informationT-nuts, jaw blanks 54 SMW-AUTOBLOK
T-nuts, jaw blanks 54 SMW-AUTOBLOK T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC
More informationApril /10 CHAMFERING RINGS FOR. and. Available for
1/10 CHAMFERING RINGS FOR Available for and CHAMFERING RINGS FOR Available for and 2/10 FEATURES Compatible with DRIRUSH Available for TOPDRI and T-DRI with 3XD, 4XD Adjustable step length Minimized cycle
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationrefix Pressure vessels The choice of professionals
refix Pressure vessels Te coice of professionals refix Most durable material, outstanding German workmansip Like all Reflex products, refix pressure vessels are designed to serve in a wide range of applications
More informationCrossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
More informationEDGE PCD. Indexable Inserts. Issue 11
Issue 11 EDGE PCD Indexable Inserts EDGE PCD inserts are widely used to machine practically all non-ferrous metals, ranging from soft aluminum through cemented tungsten carbide. They are also used to machine
More informationsupertorc Actuators and Controls
supertorc Actuators and Controls Contents supertorc Actuators 4 5 6 7 7 7 8 8 8 Basic actuator Module system Scotc-Yoke principle Manual actuator Electric actuator Cylinder actuator Sub-sea actuator Spring
More informationINDEX CLS LUXO 3 RGB SAFETY INFORMATION CONTENT. Manual V2.3 - August Index 2. Luxo 3 ceiling units 4. Safety information 2
DRIVER DRIVER EXCLUDED EXTERNAL Wall Ceiling 360º 30º 10 cm 100 cm 172 gr 50.000 40º 60º 120º 3 x Luxeon IP40 IP52 CLS LUXO 3 RGB Manual V2.3 - August 2018 DEX Index 2 Safety information 2 Content 2 Tecnical
More informationC-Lube Linear Roller Way Super MX Linear Roller Way Super X
-ube inear Roller ay uper inear Roller ay uper X 14 Aquamarine endplate for identification of -ube inear ay Identifi cation number and specifi cation Te specification of -ube inear Roller ay uper is identified
More informationSTAUFF. Test. Local solutions for individual customers worldwide
STAUFF Test ocal solutions for individual customers worldwide Walter Stauffenberg mbh & Co. K P.O.Box 745 58777 Werdol ermany Im Erenfeld 4 5879 Werdol ermany Telepone: + 49 2392 96-0 Facsimile: + 49 2392
More informationAnti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
More informationIndustrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
More informationCUTTING - BENDING - NOTCHING - NICK GRINDING
D i e r o o m E q u i p m e n t www.dieroom.com CUTTING - - NOTCHING - NICK GRINDING UC-04 CUTTING Straigt and double miter (Lipper) cutting macine. 3-4 pt Cutting eigt 23,8-50 mm Miter angle 54 (54+9
More informationExpansion valves - 2 of 2
Expansion valves - 2 of 2 Contents Page Thermostatic expansion valves, type T 2 and TE 2 Introduction... 3 Features... 3 Technical data... 3 Superheat... 3 Ordering: Components with flare flare connection...
More information13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 XL200 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE CALIPER 13-8
XL200 13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 TROUBLESHOOTING 13-2 BRAKE FLUID REPLACEMENT/ BLEEDING 13-3 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE 13-8 SERVICE INFORMATION GENERAL t A contaminated
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationCUTTING - BENDING - NOTCHING - NICK GRINDING
D i e r o o m E q u i p m e n t www.dieroom.com CUTTING - - NOTCHING - NICK GRINDING UC-04 CUTTING Straigt and double miter (Lipper) 3-4 pt Cutting eigt 23,8-50 mm Miter angle 54 (54+9 double angle and
More informationTOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
More informationKEEP IT LEVEL.
KEEP IT LEVEL Ideal for macinery and conveyor belts, our range of Pressed Bolt own Feet includes an asymmetrical base sape to improve clearance wen situating feet close to walls or walkways. For easy eigt
More informationIndustrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
More informationFIXTURE PINS. Machine Tool Components D-11 E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN MI (586) (586) FAX
FIXTURE PINS D-11 Tolerance Data & Standard Specifications MATERIAL TOLERANCE EAT TREAT ARDENED & ROUND 8620 PIN DIA =.001 ELOW NOMINAL +.0000 -.0005 1/2 DIA OR LESS RC 50-52.025-.035 DEEP 9/16 DIA AND
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationIndex 2. Safety information 2. Content 2. Technical 3. Specifications 3. Installation 4. Make sure all connectors are connected properly
RGB 700 ma Wall Ceiling 360º 30º 10 cm 100 cm 172 gr 50.000 25º 40º 60º 120º 3 x Luxeon IP40 7 Watt Excluded CLS LUXO 3 RGB Manual Version 2.1 April 2017 DEX Index 2 Safety information 2 Content 2 Tecnical
More informationFS/LS MS/RS. The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing.
TOOL NEW IO Turning Inserts for Difficult-to-cut Materials 2018.6 Update B214G Item Expansion The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing. MP9005 MP9015 MT9005
More informationLocal solutions for individual customers worldwide STAUFF TWIN FERRULE TUBE CONNECTORS.
ocal solutions for iniviual customers worlwie SUFF WN FERRUE UE CONNECORS www.stauff.co.uk 1 well establise prouct in major inustries an applications e Stauff SUPEROK range alreay as many approvals an
More informationFFM04 Industrial grade high accuracy turbine flow meter
FFM0 Industrial grade ig accuracy turbine flow meter New Higly Sensitive Metal SUS Ceramics Core Bearings ow loss power & pressure Power Microflow amount Precision Measurement SUS ( VS / VH ) mm ow 0 bar
More informationNew wiper insert series for advanced turning operations
TurnLine Tungaloy Report No. 434-G FW & SW New wiper insert series or advanced turning operations 2 FW & SW TurnLine Only al te surace rougness even at doubled eed rate compared to regular ISO insert witout
More information5 TORQUE TOOLS, TORQUE TESTERS
TOQUE TOO, TOQUE TETE TOQUE CEWDIVE PAGE 79 TOQUE WENCHE, MECHANICA PAGE 80 ANGE-CONTOED TOQUE WENCHE, EECTONIC PAGE 94 ACCEOIE TOQUE WENCHE PAGE 208 INET/HE TOO PAGE 209 TOQUE MUTIPIE MUTIPOWE PAGE 28
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationEvaluation of Turnability of Tracked Vehicle
JARQ 3, 249-253 1996) Evaluation of Turnability of Tracked Veicle Nobutaka ITO Department of Bioproduction and Macinery, Faculty of Bioresources, Mie University Tsu, Mie, 514 Japan) Abstract Rice combine
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationApplication Idea. A Solis High Power LED Installed on the Epi Illuminator of a Cerna Modular Microscope. SOLIS 1A Cold White LED, 3.
S O L I S H I G H P O W E R L E D S F O R M I C R O SCOPY HigPower LEDs Designed for Microscopy pplications Typical Collimated Output Powers from 1.0 to 3.6 W Compatible wit Torlabs Lampouse Port dapters
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationCompatibility overview accessories for lathes
Compatibility overview accessories for lates Accessories items turning Item No TU 503 TU 2004 TU 2304 TU 2406 TU 2506 TU 2807 TU3008/V D 320 TU 3209 D 330 D 360 TU 360V D420 TU 420V TU 42 TU 420V TH 46
More informationHIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
More informationCatalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
More informationBERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
More informationHydropuls Shock Absorber Test Machines Type MSP
Hyropuls Sock Absorber Test Macines Type MSP Hyropuls Sock Absorber Test Macines One, Two, Four or Six - Test as Many Sock Absorbers as You Wis Rie comfort an safety are amongst te most important criteria
More informationProduces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
More informationEjector, Series EBS Thread connection pneumatic control, T-design with silencer
Type Ejector Ambient temperature min./max. +0 C / + C Medium temperature min./max. +0 C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
More informationTABLE 1 - PRODUCT FEATURES 2 1/16 2K,3K,5K 2 9/16 2K,3K,5K 3 1/8 2K,3K,5K 4 1/16 2K,3K,5K 5 1/8 2K,3K,5K -75 F (-60 C) THRU 250 F (121 C)
VALVES M SERIES OVERVIEW Te Valveworks USA M series consists of a lineup of gate valves wit reliable, proven designs tat are engineered and manufactured to meet te requirements of API 6A. Tis series of
More informationPyxis & Corvus. Launch brochure
Pyxis & Corvus Launc brocure Roblon Pyxis and Roblon Corvus downligts acieve uncompromising ligt quality tat is based on exceptional LED ligting tecnology. Pyxis and Corvus downligts are ideal for use
More informationIn-Ex Agribooms 6m and 8m (Leaflet Issue 5, October 2015)
In-Ex Agribooms 6m and 8m (Leaflet 2400-0910 Issue 5, October 2015) SAFETY PRECAUTIONS In-Ex Agribooms 6m and 8m AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF In-Ex ATTACHMENTS/ACCESSORIES Be warned of
More informationDesign and Performance Evaluation of an Air-Blast Atomizer
Design and Performance Evaluation of an Air-Blast Atomizer Dr. Olusegun Adefonabi Adefuye Department of Mecanical Engineering, Lagos State University, Lagos, Nigeria Bennet Ifenna Okoli Centre for Space
More informationPLUMBING TOOLS 8. PLUMBING TOOLS PLUMBING TOOLS PLUMBING TOOLS
. PUMBING TOOS PUMBING TOOS PUMBING TOOS PUMBING TOOS 321 PUMBING TOOS PUMBING TOOS. PUMBING TOOS PUMBING TOOS CAUTION Ratchet pipe cutters, Miniature ratchet tube cutter, Tube cutter, Flex pipe cutter,
More information100% 100% 100% RECYCLABLE CUSTOM DUTCH DESIGN
% DUTCH DESIGN Our stainless steel Superline planter is a classic for public areas, offices, airports an oter places were timeless esign an urable, low-maintenance solutions for interior an exterior plants
More informationSAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationElectric Pallet Truck with Lithium Battery
Electric Pallet Truck wit Litium Battery : CBD12W 48V large capacity maintenance-free litium battery, long working time around 6ours. Te carging time only needs 3 ours. 10 seconds replacement of te battery(two
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationZ Tube O.D. Slze. Min
S Fittgs kok S Straigt Og Seal Fittgs are of positionable feature and provide connection tube to straigt tread boss. Furter tis as an advantage of elimatg weldg and brazg process wen used as bulkead fittg
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationDIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
More informationNEW NEXT GENERATION HYDRAULIC PUMP DRIVES FEATURING DYNAGEAR
NEXT GENERATION YDRAULI PUMP DRIVES EATURING MODULAR DESIGN SIMPLER TO SERVIE WET SPLINE DROP-IN REPLAEMENT WIT OTER BRANDS QUIETER OPERATION OMPETITIVE PRIING LASS 10 GEARS NEW NEW EATURES and BENEITS
More informationA Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
A Finite Element Termo-Mecanical Stress Analysis of IC Engine Piston Manis Kumar M.Tec., Dept. of Mecanical Engineering HBTI Kanpur, India ---------------------------------------------------------------------***---------------------------------------------------------------------
More informationA VH Series. VH Series. AComparison with NSK standard products
133-5-1.2 1. eatures (1) ig-performance end seals ig-performance end seals wit a multi-lip structure prevent te entry of various foreign matters. (2) lubrication unit (standard) Outstanding lubrication
More informationSECTIONS FOR MINE ROADWAY SUPPORTS AND TUNNELS
SECTIONS FOR MINE ROADWAY SUPPORTS AND TUNNELS 1 Success is a journe, not a destination. Ben Sweetland 2 COMPANY PROFILE KOCAER GROUP commenced its operations in te iron and steel sector in te earl 1960s
More information15T Low Headroom Hoist TNC 15/3 LHR DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 700kg Weight D01-AHT33 REV0
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Scale not to scale Designed By Title of Part Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of Project
More informationOptimized Radius of Roller Large End Face in Tapered Roller Bearings
NTN TECHNICAL REVIEW No.77 29 Tecnical Paper Optimized Radius of Roller Large End Face in Tapered Roller Bearings Hiroki FUJIWARA Takasi TSUJIMOTO Kazuto YAMAUCHI Tapered roller bearings can support eavy
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More information