Cut-Off Tools. SumiGrip Jr. SumiGrip. SEC-Small Diameter Cut-off Tools SEC-Grooving / Cut-Off Tools
|
|
|
- Miles Cannon
- 6 years ago
- Views:
Transcription
1 Tools 33 to 46 Tools Tools SumiGrip Jr. SumiGrip SEC-Small Diameter Cut-off Tools SEC- / Tools SEC- Tool Series Selection Guide 34 Introduction of SumiGrip 35 STH Type 36 STS Type 37 WCH Type 38 WCS Type 39 SCT Type 40 GNDM Type 42 GNDL Type 44 GNDM Type / GNDML Type (Small Tool) 46 Indications and Symols mark: Standard stocked item mark: To e replaced y a ne item featured on te same page mark: To e replaced y ne item (Please confirm stock availaility) mark: Semi-standard stock (Please confirm stock availaility) mark: or planned stock (Please confirm stock availaility) No mark: Made-to-order item mark: We cannot produce 33
2 SEC-Cut-off Tool Series SELECTION GUIDE WCH32 Caride Holder Cut-off diametermm GNDL Small Tools GNDM Small Tools SCT STH32 Steel Holder WCH26Caride Holder STH26 Steel Holder STS Steel Holder WCS Caride-Steel Holder GNDL GNDM Widt of cutmm Tools Range of Tool Application (or Solid Workpieces) Application Small Tools Small to Medium Dia. Medium to Large Dia. SCT Series GNDM/ GNDL Small Tools GNDM/ GNDL STH/ STS SumiGrip Jr. WCH/ WCS SumiGrip Cut-off Tool Series Sape to 44 Insert Sape ( ): No. of corners (2) (2) (1) 36 to 37 (1) 38 to 39 ut-off diameter Widt* Caracteristics Sarp cutting edge it ground inserts Scre can e tigten from ot sides 2-cornered type Hig-rigidity design and outstanding cip control 2-cornered unground inserts availale in idts starting from 1.25mm Hig-rigidity ody, rigid clamping Outstanding cip control Unground 2-cornered inserts Large diameter macining up to ø100mm Economical steel sank 1-cornered self-grip type Large diameter macining up to ø100mm Hig-rigidity caride sank 1-cornered self-grip type SEC-Small Diameter Cut-off Tools SCT Type Our first recommendation for small lates Sarp cutting edge reduces cutting resistance and minimizes nip formation SEC-Cut-off Tools GND Type GNDM Type / GNDL Type SEC-Cut-off Tools SumiGrip Jr. Steel Sank SumiGrip Caride Sank Our first recommendation for small to medium diameters Hig rigidity ody and rigid clamping enale stale cut-off operations Our first recommendation for medium to large diameters Blade type is availale for cut-off diameters of up to ø140mm 34
3 SEC- Tools Caracteristics Caride and steel olders (SumiGrip Jr.) are availale. Applicale to interrupted cutting. or cut-off, grooving and camfering etc. Types Tool lock type Sank type Insert Small Wedge Angle Toololder Optimum Clamp Design Performance Insert Clamping orce Holder Overang Wear Resistance SumiGrip Jr. Comp. A (Widt 3mm) More tan doule of competitor's Insert Clamping orce (N) Good Holder Overang Limit (mm) SumiGrip SumiGrip Jr. Comp. A Work Sape Comp. A Breakage SumiGrip Jr eed Rate f (mm/rev) No. of s Work Material: S45C (ø50mm, HB250) Cutting Speed: vc=80m/min, Dry lank Wear Widt (mm) mm SumiGrip Work Material: S45C (Hex), Insert: Coated (3mm Widt) Cutting Speed: vc=150mm/min, f=0.15mm/rev Water-solule Cutting Oil Tools Tool Block Type Selection Guide SBN Type Tool lock (one unit) Applicale en te tool post of te macine is like son on te rigt. a a:a Center Heigt c Ex.SBN20 26 General-Purpose Late etc. Tool Post Turret Type Tool Post Tool Post SBU Type Tool lock (2 piece unit) a a a: Center Heigt Ex.SBU20 26 Applicale eter te tool post of te macine is like or son on te rigt. Large clamp design enale long older overangs it ide clamping area. c Tool lock Clamp from aove Spacer Tool lock Wedge Clamp from te side 35
4 SEC- Tools STH Type Cut-off Tools (Steel Holder/Tool Block Type) STH Mounting Inserts Hammer Insert Mount insert y ligtly knocking it in it a ooden or plastic ammer. (Ceck tat te insert cannot e pulled out y and.) Tere is no need to force te insert rigt ack on to te stopper. Please note tat excessive knocking on te insert may cause damage to ot insert and older. Spare Parts Tools 150 Holders Max. Cut-off 1 Diameter Applicale Insert Applicale Tool Block Spanner STH WC 2 STH WC 3 SBN STH WC 4 SBU STH WC 5 STH WC 2 SBN SL-4 STH WC 3 STH WC 4 STH WC 5 * Sape of STH32-2 is sligtly different from te aove figure. Tool Block (Integrated Unit) Spare Parts Tool Block (Separale Unit) SBN SBU SBU Spare Parts H a H a L a: Center Heigt 18 c a: L Center Heigt 18 c BCS15 BCS20 <SBN20 26> Clamp Doule Scre Spanner a c H L SBN SBN BWS30 WB8-20 LH040 SBN <SBU20 26> BCS25 Cap Clamp Scre Spanner a c H L SBU BCS15 SBU BCS20 BX0622 LH050 SBU BCS25 Inserts (Inserts are same as tose for te caride older SumiGrip Series.) Neutral (N) Rigt Hand (R) Left Hand (L) WC 2T : =0.15 WC General Steel WC 2T Small Dia. Lo orce WC A Exotic Metal, Lo eed WC B (Cast Iron, Non errous Metal Coated Caride Coated Caride Cermet Caride Caride AC830P AC225 T1500A T1200A A30 G10E G10E WC N2T 2 WC N2A 2 WC R2T 2 WC L2T 2 WC N3 3 WC N3A 3 WC N3B 3 WC R3 3 WC R3A 3 WC R3B 3 WC L3 3 WC L3A 3 WC L3B 3 WC N4 4 WC N4A 4 WC N4B 4 WC R4 4 WC R4A 4 WC R4B 4 WC L4 4 WC L4A 4 WC L4B 4 WC N5 5 WC N5A 5 WC N5B 5 WC R5 5 WC R5A 5 WC R5B 5 WC L5 5 WC L5A 5 WC L5B 5 Applicale Holder STH 26-2 STH 32-2 STH 26-3 STH 32-3 STH 26-4 STH 32-4 STH 26-5 STH 32-5 WC B type is similar in sape it WC type ut it smaller edge treatment. 36 mark : To e replaced y ne item (Please confirm stock availaility)
5 SEC- Tools STSType (Steel Holder/Sank Type) STS f Mounting Inserts Insert Mount insert y ligtly knocking it in it a ooden or plastic ammer. Hammer (Ceck tat te insert cannot e pulled out y and.) Tere is no need to force te insert rigt ack on to te stopper. L 3 Max. Cut-off Diameter Please note tat excessive knocking on te insert may cause damage to ot insert and older. Spare Parts Aove figures so rigt and tools. Holders Max. Cut-off R L f 1 L 3 Diameter STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L STS R/L Recommended Cutting Conditions Grade ACE-Coat AC830P or WC 2T ACE-Coat AC225* Cermet T1500A T1200A Caride A30 (*Cast Iron: G10E) Applicale Insert WC 2 WC 3 WC 4 WC 5 Spanner Cutting Speed v c (m/min) eed Rate f(mm/rev) P General Steel P Soft Steel P Die Steel M Stainless Steel K Cast Iron v c 100 to to to to 200 f 0.10 to to to to 0.25 v c 50 to to to to 200 f 0.03 to to to to 0.10 v c 80 to to to to 180 f 0.08 to to to to 0.20 v c 80 to to to to 180 f 0.03 to to to to 0.10 v c 50 to to to to to 120 f 0.05 to to to to to 0.20 Inserts (Inserts are same as tose for te caride older SumiGrip Series.) SL-4 * AC225: CVD coated caride grade for lo-speed, lo feed-rate cutting. Tools Neutral (N) Rigt Hand (R) Left Hand (L) WC 2T : =0.15 WC General Steel WC2T Small Dia. Lo orce WCA Exotic Metal, Lo eed WCB Cast Iron, Non errous Metal Applicale Holder Coated Caride Coated Caride Cermet Caride Caride AC830P AC225 T1500A T1200A A30 G10E G10E WC N2T 2 WC N2A 2 STS R/L1010-2,STS R/L2020-2, WC R2T 2 STS R/L WC L2T 2 STS R/L WC N3 3 WC N3A 3 WC N3B 3 STS R/L1616-3,STS R/L2525-3, WC R3 3 WC R3A 3 WC R3B 3 STS R/L WC L3 3 WC L3A 3 WC L3B 3 STS R/L WC N4 4 WC N4A 4 WC N4B 4 STS R/L WC R4 4 WC R4A 4 WC R4B 4 STS R/L WC L4 4 WC L4A 4 WC L4B 4 WC N5 5 WC N5A 5 WC N5B 5 STS R/L WC R5 5 WC R5A 5 WC R5B 5 WC L5 5 WC L5A 5 WC L5B 5 STS R/L WC B type is similar in sape it WC type ut it smaller edge treatment. mark : To e replaced y ne item (Please confirm stock availaility) 37
6 SEC- Tools WCH Type (Tool Block Type) WCH Mounting Inserts Hammer Insert Mount an insert y ligtly knocking it in it a ooden or plastic ammer. (Ceck tat te insert cannot e pulled out it a and.) Be aare tat excessively driving te insert may cause damage to te insert or older. Tools 150 Spare Parts Holders Aove figures so rigt and tools. Max. Cut-off 1 Diameter Applicale Insert Applicale Tool Block Spanner WCH WC 2 SL-2 WCH WC 3 SBN WCH WC 4 SBU SL-1 WCH WC 5 WCH WC 2 SBN SL-2 WCH WC 3 SBN WCH WC 4 SBU SL-1 WCH WC 5 SBU Tool Block (Integrated Unit) Spare Parts 20 (WCH32-2) Tool Block (Separale Unit) Spare Parts H a L a: Center Heigt 18 c H a L a: Center Heigt 18 c BCS15 BCS20 <SBN20 26> Clamp Doule Scre Spanner a c H L SBN SBN BWS30 WB8-20 LH040 SBN <SBU20 26> BCS25 Cap Clamp Scre Spanner a c H L SBU BCS15 SBU BCS20 BX0622 LH050 SBU BCS25 Inserts (Inserts are same as tose for te steel SumiGrip Jr. older.) Neutral (N) Rigt Hand (R) Left Hand (L) WC 2T : =0.15 WC General Steel WC2T Small Dia. Lo orce WCA Exotic Metal, Lo eed WCB Cast Iron, Non errous Metal Coated Caride Coated Caride Cermet Caride Caride AC830P AC225 T1500A T1200A A30 G10E G10E WC N2T 2 WC N2A 2 WC R2T 2 WC L2T 2 WC N3 3 WC N3A 3 WC N3B 3 WC R3 3 WC R3A 3 WC R3B 3 WC L3 3 WC L3A 3 WC L3B 3 WC N4 4 WC N4A 4 WC N4B 4 WC R4 4 WC R4A 4 WC R4B 4 WC L4 4 WC L4A 4 WC L4B 4 WC N5 5 WC N5A 5 WC N5B 5 WC R5 5 WC R5A 5 WC R5B 5 WC L5 5 WC L5A 5 WC L5B 5 Applicale Holder WCH 26-2 WCH 32-2 WCH 26-3 WCH 32-3 WCH 26-4 WCH 32-4 WCH 26-5 WCH 32-5 WC B type is similar in sape it WC type ut it smaller edge treatment. 38 mark : To e replaced y ne item (Please confirm stock availaility)
7 (Sank Type) WCS Brazed Type SEC- Tools WCS Type 26.5 Clamp Type Mounting Inserts Hammer Insert Mount an insert y ligtly knocking it in it a ooden or plastic ammer. (Ceck tat te insert cannot e pulled out it a and.) Be aare tat excessively driving te insert may cause damage to te insert or older. Spare Parts Holders Aove figures so rigt and tools. Series Brazed Type Clamp Type Blades Max. Applicale Applicale Cut-off R L f f 1 1 Diameter Blade Insert ig. Spanner WCS R/L WC 2 1 WCS R/L WC 2 1 SL-2 WCS R/L WC 2 2 WCS R/L WC 3 2 SL-1 WCS R/L WCH17-3 WC 3 3 WCS R/L WCH17-4 WC 4 3 WCS R/L WCH17-5 WC 5 3 WCS R/L WCH17-3 WC 3 4 SL-1 WCS R/L WCH17-4 WC 4 4 WCS R/L WCH17-5 WC 5 4 Spare Parts Blade is included it te older. Tools 17 f f1 f f1 46 Maximum Maximum Cut-off Diameter Cut-off Diameter 46 ig.1 ig.2 ig.3 46 ig.4 B B Applicale Holder WCH WCS R/L20-3,25-3 WCH WCS R/L20-4,25-4 WCH WCS R/L20-5,25-5 Cap Scre BX0622 Spanner LH050 Applicale Holder All Clamp Types Inserts (Inserts are same as tose for te steel SumiGrip Jr. older.) Neutral (N) Rigt Hand (R) Left Hand (L) WC 2T : =0.15 WC General Steel WC2T Small Dia. Lo orce WCA Exotic Metal, Lo eed WCB Cast Iron, Non errous Metal Applicale Holder Coated Caride Coated Caride Cermet Caride Caride AC830P AC225T1500AT1200A A30 G10E G10E WC N2T 2 WC N2A 2 WCS R/L WC R2T 2 WCS R/L WC L2T 2 WCS R/L WC N3 3 WC N3A 3 WC N3B 3 WCS R/L WC R3 3 WC R3A 3 WC R3B 3 WCS R/L20-3 WC L3 3 WC L3A 3 WC L3B 3 WCS R/L25-3 WC N4 4 WC N4A 4 WC N4B 4 WCS R/L20-4 WC R4 4 WC R4A 4 WC R4B 4 WCS R/L25-4 WC L4 4 WC L4A 4 WC L4B 4 WC N5 5 WC N5A 5 WC N5B 5 WCS R/L20-5 WC R5 5 WC R5A 5 WC R5B 5 WC L5 5 WC L5A 5 WC L5B 5 WCS R/L25-5 WC B type is similar in sape it WC type ut it smaller edge treatment. mark: To e replaced y ne item (Please confirm stock availaility) 39
8 SEC- Tools SCT Type SCT ig f ig f Spare Parts Tools Holders (Rigt Hand) 218 f 1 SCT R SCT R SCT R SCT R SCT R SCT R Holders (Left Hand) SCT L SCT L SCT L SCT L SCT L SCT L Aove figures so rigt and tools. Applicale Insert ig. Scre Spanner CT R05 CT R12 CT R16 CT L05 CT L12 CT L16 (-NB) (-NB) (-NB) (-NB) (-NB) (-NB) BTX0410T8L BTX0410T8R TRX08 TRX08 Caracteristics Ne clamping system Ne clamping system makes it possile to cange corners y only loosening te scre from te ack. Hig quality surface finis Excellent cip removal it good surface finis even at te centre of te end face. Design Ne scre it spanner ead at ot ends makes it possile to cange inserts from Sarp cutting edge it te ack arc-saped reaker minimises cutting force it good cip removal aility Ne clamping system makes it possile to cange comers y only loosening te scre Stale and long tool life PVD-coated grade AC530U provides staility and longer tool life. Maximum Cut-off Diameter ø5/ø12/ø16 Widt 0.5/1.0/1.5/2.0mm Corner R 0.05/0mm Lead Angle 0 /20 Ne PVD-coated grade ACZ530U provides longer and stale tool life CT Type Insert Insert tigtening direction indicator Sank Sizes 10/12/16mm SCT Type Holder Comparison Test Wear Resistance Surface inis Comparison Small Nip Large Nip Cutting Resistance (N) Principal orce eed orce 0 SCT Type Competitor's SCT Type Competitor's Work Material: S45C (ø10mm) Widt: 1.5mm vc=60m/min f=0.06mm/rev Wet Work Material: SUS430 (ø8mm) Widt: 1.0mm (anded) vc=45m/min f=0.02mm/rev Wet 40
9 SEC- Tools SCT Type Insert and Holder Variations (igures elo so inserts it cipreaker) Holder Style SCTR SCTL Insert Orientation =20 =20 =20 =20 Insert Sape and Dimensions = s =20 = s 55 =20 Inserts (or Rigt-anded Holders) Coated Caride Max. Cut-off AC530U Diameter R N L (mm) s CTR R/N/L CTR R/N/L 5 0 CTR R/N/L CTR R/N/L CTR R/N/L CTR R/N/L CTR R/N/L CTR R/N/L CTR R/N/6 1.0 CTR R/N/L CTR R/N/L CTR R/N/ CTR R/N/L CTR R/N/L CTR R/N/L-NB CTR R/N/L-NB CTR R/N/L-NB CTR R/N/L-NB CTR R/N/L-NB CTR R/N/L-NB CTR R/N/L-NB Inserts (or Left-anded Holders) Coated Caride Max. Cut-off AC530U Diameter R N L (mm) s CTL R/N/L CTL R/N/L 5 0 CT21005 R/N/L CT21505 R/N/L CT22005 R/N/L CT21000 R/N/L CT21500 R/N/L CT22000 R/N/L CT61005 R/N/6 1.0 CT61505 R/N/L CT62005 R/N/L CT61000 R/N/ CT61500 R/N/L CT62000 R/N/L CTL R/N/L-NB CT21000 R/N/L-NB CT21500 R/N/L-NB CT22000 R/N/L-NB CT61000 R/N/L-NB CT61500 R/N/L-NB CT62000 R/N/L-NB Cipreaker Yes No Cipreaker Yes No Applicale Toololder SCT R1010 SCT R1212 SCT R1616 SCT R SCT R SCT R SCT R1010 SCT R1212 SCT R1616 SCT R SCT R SCT R Applicale Toololder SCT L1010 SCT L1212 SCT L1616 SCT L SCT L SCT L SCT L1010 SCT L1212 SCT L1616 SCT L SCT L SCT L Tools 41
10 SEC- Tools GNDMType GNDM f Max. Cut-off Diameter a r Spare Parts Tools Holders Aove figures so rigt and tools. Widt Max. (mm) Cap Cut-off Dia. Applicale Insert f 1 a r (mm) Scre GNDM R/L2020K GCM 20- GNDM R/L2020K GCM 30- GNDM R/L2020K GCM 40- GNDM R/L2020K GCM N50- GNDM R/L2020K GCM N60- GNDM R/L2525M GCM 20- GNDM R/L2525M GCM 30- GNDM R/L2525M GCM 40- GNDM R/L2525M GCM N50- BX LH040 GNDM R/L2525M GCM N60- GNDM R/L3225P GCM 30- GNDM R/L3225P GCM 40- GNDM R/L3225P GCM N50- GNDM R/L3225P GCM N60- GNDM R/L3225P GCM N70- GNDM R/L3225P GCM N80- GNDM R/L3232P GCM 30- GNDM R/L3232P GCM 40- GNDM R/L3232P GCM N50- GNDM R/L3232P GCM N60- BX LH050 GNDM R/L3232P GCM N70- GNDM R/L3232P GCM N80- Select olders and inserts it te same grooving idts (). Te maximum cut-off diameter indicated aove is for inserts ere r= 0.2 mm. Recommended Tigtening Torque Spanner Nm 42
11 SEC- Tools GNDMType or GNDM Application / Application ig. 1 W Sape Appearance S GG Type GL Type G Type General Purpose Type Lo eed Type Lo cutting force Type Sape Appearance ig. 3 Draing sos a rigt and tool. CG Type 5 4- s General Purpose Type Select olders and inserts it te same grooving idts ( ). Coated Caride AC830P AC425K AC520U AC530U s Cutting idt Tolerance GCM N2002-GG 2.0 ± GCM N3002-GG 3.0 ± GCM N4002-GG 4.0 ± GCM N5002-GG 5.0 ± GCM N6002-GG 6.0 ± GCM N3004-GG 3.0 ± GCM N4004-GG 4.0 ± GCM N5004-GG 5.0 ± GCM N6004-GG 6.0 ± GCM N7004-GG 7.0 ± GCM N8004-GG 8.0 ± GCM N2002-GL 2.0 ± GCM N3002-GL 3.0 ± GCM N4002-GL 4.0 ± GCM N5002-GL 5.0 ± GCM N6002-GL 6.0 ± GCM N7004-GL 7.0 ± GCM N8004-GL 8.0 ± GCM N2002-G 2.0 ± GCM N3002-G 3.0 ± GCM N4002-G 4.0 ± GCM N5002-G 5.0 ± GCM N6002-G 6.0 ± Coated Caride AC830P AC425K AC520U AC530U s R L R L R L R L Cutting idt Tolerance GCM R/L2002-CG ± GCM R/L3002-CG ± GCM R/L4002-CG ± Pcs./ Pack ig. Pcs./ Pack ig. 5 3 Tools Recommended Cutting Conditions (GNDM) Work Material P Caron Steel / Alloy Steel M Stainless Steel K Cast Iron S Exotic Alloy Grade AC830P AC520U AC530U AC830P AC520U AC530U AC425K AC520U AC530U AC520U AC530U Cutting Speed v c (m/min) 80 to to to to to to to to to to to 60 / Breaker Widts (mm) eed Rate fmm/rev GG GL G CG to to to to to to to to to to to to to to to to to to to to to to 0.40 mark: Standard stocked item (expanded item) 43
12 SEC- Tools GNDLType GNDL Max. Cut-off Diameter f a r Spare Parts Tools Holders Aove figures so rigt and tools. Widt Max. (mm) Cap Cut-off Dia. Applicale Insert f 1 a r (mm) Scre GNDL R/L2020K GCM 20- GNDL R/L2020K GCM 30- GNDL R/L2020K GCM 40- GNDL R/L2020K GCM N50- GNDL R/L2020K GCM N60- GNDL R/L2525M GCM 20- GNDL R/L2525M GCM 30- GNDL R/L2525M GCM 40- GNDL R/L2525M GCM N50- BX LH040 GNDL R/L2525M GCM N60- GNDL R/L3225P GCM 30- GNDL R/L3225P GCM 40- GNDL R/L3225P GCM N50- GNDL R/L3225P GCM N60- GNDL R/L3225P GCM N70- GNDL R/L3225P GCM N80- GNDL R/L3232P GCM 30- GNDL R/L3232P GCM 40- GNDL R/L3232P GCM N50- GNDL R/L3232P GCM N60- BX LH050 GNDL R/L3232P GCM N70- GNDL R/L3232P GCM N80- Select olders and inserts it te same grooving idts (). Te maximum cut-off diameter indicated aove is for inserts ere r= 0.2 mm. Recommended Tigtening Torque Spanner Nm 44
13 SEC- Tools GNDLType or GNDL Application / Application ig. 1 W ig. 3 Sape Appearance S GGType GL Type G Type General Purpose Type Lo eed Type Lo cutting force Type Sape Appearance Draing sos a rigt and tool s CG Select olders and inserts it te same grooving idts (). Coated Caride AC830P AC425K AC520U AC530U s Cutting idt Tolerance GCM N2002-GG 2.0 ± GCM N3002-GG 3.0 ± GCM N4002-GG 4.0 ± GCM N5002-GG 5.0 ± GCM N6002-GG 6.0 ± GCM N3004-GG 3.0 ± GCM N4004-GG 4.0 ± GCM N5004-GG 5.0 ± GCM N6004-GG 6.0 ± GCM N7004-GG 7.0 ± GCM N8004-GG 8.0 ± GCM N2002-GL 2.0 ± GCM N3002-GL 3.0 ± GCM N4002-GL 4.0 ± GCM N5002-GL 5.0 ± GCM N6002-GL 6.0 ± GCM N7004-GL 7.0 ± GCM N8004-GL 8.0 ± GCM N2002-G 2.0 ± GCM N3002-G 3.0 ± GCM N4002-G 4.0 ± GCM N5002-G 5.0 ± GCM N6002-G 6.0 ± Coated Caride AC830P AC425K AC520U AC530U s R L R L R L R L Cutting idt Tolerance GCM R/L2002-CG ± GCM R/L3002-CG ± GCM R/L4002-CG ± Pcs./ Pack ig. Pcs./ Pack ig. 5 3 Tools Recommended Cutting Conditions (GNDL) Work Material P Caron Steel / Alloy Steel M Stainless Steel K Cast Iron S Exotic Alloy Grade AC830P AC520U AC530U AC830P AC520U AC530U AC425K AC520U AC530U AC520U AC530U Cutting Speedv c 80 to to to to to to to to to to to 60 / Breaker Widts (mm) eed Ratef GG GL G CG to to to to to to to to to to to to to to to to to to to to to to 0.40 mark: Standard stocked item (expanded item) 45
14 SEC- Tools (Small Tools) GNDM/GNDLType Zero Off-set GNDM (Small Tools) Max. Cut-off Diameter f e a r Spare Parts Cut-off Tools Holders Widt Max. (mm) Cap Cut-off Dia. Applicale Insert f 1 e (mm) Scre GNDM R/L1616JX (16) GCM N G GNDM R/L1616JX (16) GCM 20- BX LH040 GNDM R/L1616JX (16) GCM 30- Select olders and inserts it te same grooving idts (). GNDL (Small Tools) Aove figures so rigt and tools. Recommended Tigtening Torque Spanner Nm Spare Parts BTX0412N Holders BX0515 LH040 Widt Max. Recommended (mm) Insert Tigtening Cut-off Dia. ig. Applicale Insert Torque Spanner f 1 2 L 3 e (mm) Scre/ Nm GNDL R/L1010JX (10) GCM N G GNDL R/L1010JX (10) GCM N G 1 BTX0412N GNDL R/L1010JX (10) GCM LT15-10 GNDL R/L1010JX (10) GCM 30- GNDL R/L1212JX (12) GCM N G GNDL R/L1212JX (12) GCM N G 1 BTX0412N GNDL R/L1212JX (12) GCM LT15-10 GNDL R/L1212JX (12) GCM 30- GNDL R/L1616JX (16) GCM N G GNDL R/L1616JX (16) GCM 20- BX LH040 GNDL R/L1616JX (16) GCM 30- Select olders and inserts it te same grooving idts (). ig. 1 ig. 2 ar Max. Cut-off Diameter f e L 3 2 Max. Cut-off Diameter f e Aove figures so rigt and tools. ar LT15-10 GNDM Small Tools/ GNDL Small Tools Inserts Coated Caride Sape Type AC830P AC425K AC520U AC530U Cutting idt Tolerance s GCM N2002-GG 2.0 ± General Purpose Type GCM N3002-GG 3.0 ± ig. 1 GCM N3004-GG 3.0 ± Application / Application W ig. 3 5 S Pcs./ Pack. ig. Lo cutting force Type GCM N2002-GL 2.0 ± GCM N3002-GL 3.0 ± GCM N G 1.25 ± GCM N G 1.5 ± Lo cutting force Type GCM N2002-G 2.0 ± GCM N3002-G 3.0 ± Coated Caride Sape Type R L R L R L R L Cutting idt Tolerance s GCM R/L2002-CG ± General Purpose Type GCM R/L3002-CG ± Aove figures so rigt and tools. s Pcs./ Pack. ig. 5 3 Select olders and inserts it te same grooving idts (). RecommendedCutting Conditions mark: Standard stocked item (expanded item)
Grooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
Grooving / Cut-Off. Threading Tools F63
/ / 1 42 Triangular hallow Inserts (or External and Internal Grooves) External ace Internal Hardened teel Expanded Expanded Expanded EC- election Guide...2 GWC Type (or hallow Grooves)... 4 GWC Type (or
TAC J-Series Turning Toolholder for Small Lathes
AC J-Series urning oololder or Small Lates Selection Guides o J-series... 266 Speciications For General urning... 271 For Front & everse urning and Parting... 276 For Back urning... 277 For Grooving and
KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
ISCAR s Innovative Clamping System for Rough Turning
TURNING JANUARY Page 1 / 19 ISCAR s Innovative Clamping System or Roug Turning JANUARY Page 2 / 19 Higligts ISCAR as developed an innovative dovetail pocket combined wit a lever clamping mecanism. Te new
DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
Wide variety of tools drastically reduce set up time!
Tungaloy Report No. 344-E5 Ne grooving and parting off tools Extended version it ne items Wide variety of tools drastically reduce set up time! Featuresof My T series For aluminium GE-AL Widt: 2.0 ~ 4.0
High Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
High Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling
Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different
Drilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
SAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
New High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
C-Lube Linear Way MH Linear Way H MH LWH
-Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and
DURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
Crossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
EZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
NSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
A LH Series. LH Series A162. (2) Ball slide shape
Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination
Improved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
KFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
KGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
Reduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
A New T-BURST Holder for Swiss Turning Applications
1/15 A New T-BURST Holder or Swiss Turning Applications 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST
THE COMPLETE GROOVING SYSTEM. Part 2. Two cutting edge inserts in the width range mm. Toolholders for OD and ID machining
olid carbide coated wit PVD and CVD layer PCD MCD CBN THE COMPETE GROOVING SYSTEM Part 2 Two cutting edge inert in te widt range 2.0-6.0 mm Toololder for OD and ID macining Toololder for radial and axial
TR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
EXCLUSIVELY AVAILABLE AT KAR IN CANADA
XLUSIVLY VILL T R I PS Series Universal - Plain ack ounting Semi-Steel ody, 3-aw Self-entering s wit 2-Piece ard Reversible aws edium duty 3 pinion design ac cuck is provided wit: 1 set of ard master jaws
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
Solenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
No: LPD 12mm~ 13.5mm SPD 13mm~ 22mm NPD 23mm~ 60mm NPD Cartridge 61mm~ 100mm. Through Coolant System
No: 160-6 Features Excellent chip evacuation due to the specially designed flute - Special surface treatment of shank provides long durability - 4 cutting-edge using economical geometry of insert - Various
A SH Series. SH Series. 2. Ball slide shape
S Series -5-1.2 S Series 1. eatures (1) ower noise and gentler tone Incorporating a retaining piece and optimizing te circulation pat enables steel ball circulation stability and te prevention of ball
External Holders. C1 to C36. External. Holders. SEC-External Tool Holder Series... C2. SEC-External Tool Identification Table... C4.
1 to 36 E- ool Holder eries... 2 Insert N Applicale Insert N Applicale Insert -EX ool N Applicale Insert N Applicale Insert N Applicale Insert N Applicale Insert E- ool Identiication ale... 4 E-oule lamp
A LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
CERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
No: Features MGMN-G MGMN-M MRMN-M MRGN-A
No: 96-10 MGMN-G Features - Unique W shape strong clamping system ensures stability of machining - M.G.T Insert can be used at Internal operations as well as External operations - M.G.T Insert s M chip
Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.
These valves protect the hydraulic system from excessive pressure, and can e used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted y vent circuit. PRESSURE
KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System
KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers
KFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
3 Cutting Edges Use GBA for Grooving
CP188-E 3 Cutting Edges Use G for Grooving Wide Product Lineup PVD Coated for Steel / PR905 Smooth Chip evacuation due to no interference on the chip pocket External Grooving Internal Grooving G-MY New
T-holder Clamping System
T-older Clamping System Feruary 2014 1/15 Feruary 2014 2/15 T-older clamping system FEATURES Easy to mount insert on te older Enanced rigidity due to doule clamping orce design Staility and longer tool
HCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
TJD-01. number 10 25PL 12 25PL 8 12PL a p (mm) 16/ 18 35PL
Sank cutters wit (IA) tips 159 TJ-01 Catalogue = = = = z IA TJ01.010A 8 66 1 TJ01.028A 10 66 1 TJ01.029A 10 71 1 4, 4, 4, Catalogue = = = = z IA TJ01.010A 8 66 1 TJ01.028A 10 66 1 TJ01.029A 10 71 1 rice
Model KE-B. Product Name Model Application ELECTROMAGNETIC CHUCK CHUCKS CONTROLLERS MAGNETIC CHUCKS ELECTROMAGNETIC CHUCKS
ELECTRO CHUCK CONTROLLERS ELECTRO TOOL 69 Product Name Model Application Electromagnetic holder KE-BEDRKVM Used for automation of press machines and shearing robots. Permanent electromagnetic holder KEPKE-HA
Festoon systems for cables and hoses
Darwinstraat 10 N 6718 XR Ede Te Neterlands Flexile wit energy! Pone +31 (0)342 403900 Fax +31 (0)342 403912 email info@akapp.com UR www.akapp.com Festoon systems for cales and oses AKAPP Festoon installation
High Performance Drills & Endmills Threading, Grooving and Cutoff too. Metal Slash Mill. All Types of Inserts. Available Carbide, PCD, CBN & Ceramic!
All Types of Inserts Available Carbide, PCD, CBN & Ceramic! High Performance Drills & Endmills Threading, Grooving and Cutoff too. Metal Slash Mill Feed Rates Up to 0.078" IPT!!! 6X Length/Diameter stick
10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
TOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
KFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
TOOLS NEWS Update B194B. PVD coated Cermet grade for steel MP3025. Series Expansion. For excellent surface finishes and extended tool life.
Series Expansion TOOLS NEWS 2012.10 Update B194B PVD coated Cermet grade for steel For excellent surface finishes and extended tool life. PVD coated Cermet grade for steel Better tool life when machining
INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
A revolution in stainless steel turning
ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic
HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
External Holders D1 to D33
External olders 1 to 33 Selection Guide... 2 Overview... 4 Insert Grade Selection Guide... 6 Chipbreaker Selection Guide... 7 Special Tool olders For Small Parts SEC-Round Shanke olders SEC-Mini Tool Zero
T-Clamp Ultra & T-Clamp Ultra Plus
T-Clamp Ultra & T-Clamp Ultra Plus FEATURE ADVANTAGE T-Clamp ULTRA T-Clamp ULTRA PLUS All Inserts fits in Holders, Blades & Bars Reduce Costs Turning, Profiling, Grooving & Cut Off ID Turning & Grooving
Compatibility overview accessories for lathes
Compatibility overview accessories for lates Accessories items turning Item No TU 503 TU 2004 TU 2304 TU 2406 TU 2506 TU 2807 TU3008/V D 320 TU 3209 D 330 D 360 TU 360V D420 TU 420V TU 42 TU 420V TH 46
MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction
No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate
C-Lube Linear Roller Way Super MX Linear Roller Way Super X
-ube inear Roller ay uper inear Roller ay uper X 14 Aquamarine endplate for identification of -ube inear ay Identifi cation number and specifi cation Te specification of -ube inear Roller ay uper is identified
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
C-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System
KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers
T-nuts, jaw blanks 54 SMW-AUTOBLOK
T-nuts, jaw blanks 54 SMW-AUTOBLOK T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
A VH Series. VH Series. AComparison with NSK standard products
133-5-1.2 1. eatures (1) ig-performance end seals ig-performance end seals wit a multi-lip structure prevent te entry of various foreign matters. (2) lubrication unit (standard) Outstanding lubrication
Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).
igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30
Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
A gread variety of applications
P92 - Parting off, grooving and turning A gread variety of applications `` `` `` Grooving Turning Parting off 45 P92 - Parting off, grooving and turning A great variety of applications Cutting and turning
Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
TOOLS NEWS B225N. Cutting Off & Grooving System. GWSeries. New Product. Long Lasting, Easy to Use Cutting Off & Grooving System
TOOLS NEWS B225N & Grooving System Series New Product Long Lasting, Easy to Use & Grooving System Simplified Series Simplicity & convenience. Introducing a new kind of cutting off & grooving system that
A revolution in stainless steel turning
A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic deformation resistance. B201E ISO insert Series for Stainless
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
GStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
MANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
Head BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
Toyota CT26 Type Turbos
Type Turbos Dynamic & Carbon Seal Common Service Parts Oversize Service Parts Major Service Parts (Shaft & Wheels, Compressor Wheels) Turbine Housing Type Dynamic Seal Component Parts Common Dynamic Seal
New PVD grade for general purpose is added in multi-functional series
TurnLine www.tungaloy.com Tungaloy Report No. 391-E TUNGCUT New PVD grade for general purpose is added in multi-functional series ACCELERATED MACHINING TurnLine Multi-functional tool system for diverse
2 Finger, 3 Finger, 4 Finger Parallel Style Air Gripper. Series MHS. MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW MRHQ Misc.
1 inger, inger, inger arallel Style Air Gripper Series MH MH - --1 ightweight, compact design with reduced height ong stroke () introduced to upgraded series. Ideal for gripping workpieces of different
KFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
Features. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
Grooving, Cut-Off, and Turning
Grooving, Cut-Off, and Turning Grooving Application Guide..........................................................................D2 D3 WMT Grooving, Cut-Off, and Turning................................................................D4
SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
Goose-neck Holder. VB/VC Insert (Without Offset / With Offset) E30 VP Insert (Without Offset / With Offset) E32. External Sleeve Holder
1~48 ummary of Turning / Advice on one point Identification ystem 2~10 11 Toololders for ack Turning 12~19 TKF (ack Turning, Goose-neck Holder) 12 TKF-A (ack Turning, Goose-neck Holder) 16 A (ack Turning)
Seal It With GDS Oil Seal Gun Drill Bushings!
Seal It With GDS Oil Seal Gun Drill Bushings! Oil Seal Gun Drill Bushings GDS GUN DRILL OIL SEAL GDS O-Ring Sizes ANSI STANDARD TOLERANCES PART NO. O. D. F G H J K L R GDSR-64 1" 1-27/64 3/8 3/16 19/32
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 XL200 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE CALIPER 13-8
XL200 13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 TROUBLESHOOTING 13-2 BRAKE FLUID REPLACEMENT/ BLEEDING 13-3 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE 13-8 SERVICE INFORMATION GENERAL t A contaminated