ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加

Size: px
Start display at page:

Download "ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加"

Transcription

1 超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ mm 60サイズ追加 ADF-2D expanded with small diameter φ mm in 60 sizes.

2 Carbide Flat Drill Multi-Purpose! ADFO New oil hole type for stainless steel applications!! Double margin allows high precision straight cutting Sharp gash angle produces chips with fine curl Cutting edge geometry with the perfect balance between rigidity and sharpness 20 20helical grooves with high rigidity ADF-2DADFS-2D / ADFO-3D Application Guide ADF-2DADFS-2D ADFO-3D Non Oil Hole with Oil Hole General purpose Suitable up to 2D Suitable for a wide variety of applications Suitable up to 3D Suitable for stainless steel Breaks chips into small, manageable pieces See p.5 for details Watch it in action ADFO-3D 1 SUS304 Work Material : SUS304

3 One Drill Does it All Designed for a Wide Variety of Applications Applicable for a multitude of drilling applications such as inclined surface, curved surface, flat-bottom hole, eccentric hole, and more. Standard lineup for thread forming of pre-drilled holes under M6. Inclined Surface Counterboring in Curved Surface Counterboring in Intricate Position Counterboring Guide Hole Inclined Exit Surface Curved Exit Surface Burrless Burrless View from top Cross-Hole Through-Hole in Curved Surface Thin Plate Correction of Eccentric Hole Half-Hole Overlapped-Holes Blind Hole for Threading Radial cutting is not recommended. etc... See p.24 for machining tips Coating 2 < 2 I IchAda coating with excellent surface smoothness The excellent smoothness in conjunction with high abrasion resistance and heat resistance enable small diameter tools to achieve long tool life chada Coating Previous Technology Surface of Coating NEW New Technology 10μm 10μm IchAda is a registered trademark of OSG Corporation. 2 2 EgiAs coating with high toughness and wear resistance characteristics Constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life Coating Structure Coating Wear-Resistant ayer Nano Periodical ayer Name of Coating Coating Color Coating Structure GPa Hardness Oxidation Temperature Heat Resistance Adhesion Strength Surface roughness Wear Resistance Welding Resistance Toughness IchAda Black Gray Cr Cr Series Single ayer 39 1,100 EgiAs Interference Color CrSi Nano Periodical ayer (Fair) (Best) 40 1,100 EgiAs is a registered trademark of OSG Corporation. 2

4 Non Oil Hole Small diameter flat surface processing Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine ADF-2D 0.2 Flat Surface SUS304 25m/min 38,788min -1 58mm/min mm/rev 0.4mm (Blind) Water-Soluble HSK E25 Vertical Machining Center ADF-2D 0 Number of Holes 500 1, Holes Corner Chipping 100 Comparison after processing 100 holes After processing 100 Holes ADF-2D Tangled of chips Corner Chipping 1,500 Non Oil Hole Inclined Surface Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine ADF-2D Inclined Surface SCM44030HRC 60m/min 1,910min mm/min 0.1mm/rev 20mm (Blind) Water-Soluble BT40 Horizontal Machining Center Shift length in hole position mm ADF-2D ADF-2D Number of Holes Holes Max Ave Min 800 Corner Chipping 1, Holes Corner Chipping 1.7 times Non Oil Hole Half-Hole Tool ADF-2D 12 Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine Flat Surface S50C 37m/min 982min mm/min 0.16mm/rev 24mm (Blind) Water-Soluble BT40 Horizontal Machining Center 6mm 12 1mm Fallen amount (based on the value of 1 mm from hole entry) mm ADF-2D Conventional Carbide Drill 10mm 10mm from hole entry 20mm 20mm from hole entry 3

5 Non Oil Hole Flat Surface Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine ADF-2D 10 Flat Surface S50C 75m/min 2,387min mm/min 0.18mm/rev 20mm (Through) Water-Soluble BT40 Horizontal Machining Center Oversize mm ADF-2D Max Ave Min Number of Holes 0 1,000 2,000 3,000 ADF-2D 2,052 Holes Still Running 972 Holes Corner Chipping times Non Oil Hole Drilling before tapping process Machining Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine Drilling ADF-2D 8.5 's General Carbide Drill 30 Flat SurfaceInclined Surface 50m/min 1,873min -1 SS mm/min 0.17mm/rev 20mm (Through) Water-Soluble Horizontal Synchronized Machining Center Tapping A-POTM m/min 955min -1 Damage comparison based on drill type used prior to threading State of Damage Drilling Hole Exit Hole Exit Tapping 200 Wear on cutting edge after tapping 200 holes ADF Drilled by ADF Still Running Drilled by 's General Carbide Drill Chipping With the use of a competitor's carbide general-purpose drill, large burrs were left resulting in instability of the after tapping process. With the ADF, on the other hand, stable tapping performance can be achieved. 4

6 with Oil Hole Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine Superior performance even in stainless steel ADFO-3D 10 Flat Surface SUS304 50m/min 1,592min mm/min 0.15mm/rev 30mm (Through) Water-Soluble BT40 Horizontal Machining Center Hole expansion comparison mm ADFO-3D A B ADFO-3D ADFO-3D with minimal hole expansion variation Max Ave Min Watch it in action Cutting Resistance Waveform ADFO-3D A B 3,300 2,200 3,300 2,200 3,300 2,200 1,100 1,100 1, Time (sec) Time (sec) Time (sec) Stable thrust and torque (rigidity supported by the 20helical grooves) Good chip evacuation (with no clogging of chips inside hole) Chips ADFO-3D A B Only the ADFO-3D was capable of breaking chips into small, manageable pieces Durability ADFO-3D ADFO-3D mcutting length m 150 Holes Chipping in hook region A 0.15m 5 Holes Tangled of chips Chipping A B 0.15m 5 Holes Tangled of chips B Tangling of chips Only the ADFO-3D demonstrated durability over 100 holes 5 5 State of cutting edge after machining 5 holes

7 with Oil Hole Tool Machined Surface Work Material Cutting Feed Depth of Hole Coolant Machine Stable processing of stainless steel even in small diameter ADFO-3D 3 Flat Surface SUS304 50m/min 5,305min mm/min 0.045mm/rev 9mm (Through) Water-Soluble BT40 Horizontal Machining Center ADFO-3D demonstrated controlled hole expansion and excellent durability Oversize mm ADFO-3D A ADFO-3D A B mcutting length Max Ave Min m 4 Holes 1.8m 200 Holes Tangled of chips Still Running B 0.036m 4 Holes Tangled of chips with Oil Hole Tool Burrs suppressed by proprietary cutting edge geometry ADFO-3D 16 Machined Surface Work Material Flat SurfaceFlat Surface 30 Flat SurfaceInclined Surface SS400 Comparison of exit burrs Hole Exit Flat Surface ADFO-3D A B Cutting 100m/min 1,989min -1 Feed 636mm/min 0.32mm/rev 318mm/min 0.16mm/rev Depth of Hole Coolant 10mm (Through) Water-Soluble 16.5mm (Through) 30 Angled Surface Machine BT50 Horizontal Machining Center Burrs suppressed Guide for Icons Tool Materials Surface Treatment Tolerance for Drill Diameter CARBIDE Tungsten Carbide EgiAs EgiAs Coating IchAda Coating h8 Tolerance for drill diameter Helix Angle Shrink Cutting Conditions 20 ABOUT 20 Helix angle of flute for drills SHRINK FIT Suitable for the shrink holder system SPEED FEED Indicates page number for cutting conditions 6

8 Carbide Flat Drill NEW SIZE ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 7 No B 6, B 6, B 6, B 6, B 6, B 6, B 5, B 6, B 5, B 6, B 5, B 7, B 7, B 7, B 6, B 5, B 7, B 6, B 7, B 5, B 7, B 7, B 6, B 5, B 6, B 5,450 See p.6 for explanation of icons. No. 2 :mmunit:mm B 6, B 6, B 5, B 6, B 6, B 6, B 6, B 6, B 5, B 6, B 5, B 6, B 6, B 6, B 6, B 6, B 5, B 6, B 6, B 6, B 6, B 6, B 6, B 5, B 5, B 6,250 B=Standard stock item =ed by specific distributors. Contact us for price & availability. =2019 =Available from Spring 2019

9 No B 5, B 6, B 6, B 6, B 6, B 6, B 5, B 6, B 5, B 5, B 5, No. 2 :mmunit:mm B 5, B 5, B 5, B 5, B 5, B 5, B 5, B 5, B=Standard stock item =ed by specific distributors. Contact us for price & availability. =2019 =Available from Spring

10 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 5, B 5, B 5, B 5, See p.6 for explanation of icons. No. 2 :mmunit:mm B 5, B 5, B 5, B 5, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 9

11 No B 5, B 5, B 5, B 5, No. 2 :mmunit:mm B 5, B 6, B 6, B 6, B 6, B 6, B 6, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 10

12 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 6, B 6, B 6, See p.6 for explanation of icons. No. 2 :mmunit:mm B 6, B 6, B 6, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 11

13 No B 6, B 6, B 7, B 7, B 7, B 7, B 7,070 No. 2 :mmunit:mm B 7, B 7, B 7, B 7, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 12

14 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 7, B 7, B 7, See p.6 for explanation of icons. No. 2 :mmunit:mm B 7, B 7, B 7, B 7, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 13

15 No B 7, B 7, B 7, B 7, No. 2 :mmunit:mm B 7, B 7, B 7, B 7, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 14

16 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 7, B 7, B 7, B 8,320 See p.6 for explanation of icons. No. 2 :mmunit:mm B 8, B 8, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 15

17 No B 8, B 8, B 8, B 8, B 8, No. 2 :mmunit:mm B 8, B 8, B 8, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 16

18 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 8, B 9, B 9, See p.6 for explanation of icons. No. 2 :mmunit:mm B 9, B 9, B 9, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 17

19 No B 9, B 9, B 9, B 9, No. 2 :mmunit:mm B 9, B 9, B 10, B 10, B 10, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 18

20 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 10, B 10, See p.6 for explanation of icons. No. 2 :mmunit:mm B 10, B 10, B 10, B 10, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 19

21 No B 10, B 10, B 10, No. 2 :mmunit:mm B 11, B 11, B 11, B 11, B=Standard stock item =ed by specific distributors. Contact us for price & availability. 20

22 Carbide Flat Drill ADF-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 2 < <2 20 ABOUT 20 SHRINK FIT SPEED FEED P28 No B 11, B 11, B 11, B 11, B 11, B 11, B 11, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 13, B 13,200 See p.6 for explanation of icons. No. 2 :mmunit:mm B 13, B 13, B 13, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 18, B 18, B 18, B 18, B 18, B 18, B 18, B 18, B 18, B 18, B 20, B 20,800 B=Standard stock item =ed by specific distributors. Contact us for price & availability. 21

23 No B 20, B 20, B 20, B 20, B 20, B 20, B 20, B 20, B 23, B 23, B 23, B 23, B 23, B 23, B 23, B 23, B 23, B 23, B 32, B 32, No. 2 :mmunit:mm B 33, B 33, B 36, B 36, B 41, B 41,200 B=Standard stock item =ed by specific distributors. Contact us for price & availability. 22

24 Carbide Flat Drill (ong Shank) ADFS-2D 1 Drills may have some discoloration, but it does not cause any performance problems. 2 3 CARBIDE EgiAs h8 20 ABOUT 20 SHRINK FIT SPEED FEED P29 No B 7, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 9, B 9, B 9, B 9, B 9, B 10,200 See p.6 for explanation of icons. No. 2 :mmunit:mm B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 11, B 11, B 11, B 12, B 13, B 13, B 13, B 14, B 14, B 14, B 16, B 17,900 B=Standard stock item 23

25 No B 17, B 17, B 18, B 19, B 19, B 22, B 22, B 22, B 25, B 26,700 No. 2 :mmunit:mm B 31, B 32, B 37, B 49, B 49, B 55, B 75, B 75, B 82, B 82,700 B=Standard stock item Machining Tips Tap and drill combination Carbide Drill AD-2D 5 Spiral Fluted Tap A-SFT M61 (2.5P) Carbide Flat Drill ADF-2D 5 Spiral Fluted Tap A-SFT M61 (1P) Carbide Flat Drill ADF-2D 5 Thread Mill AT P1 Even deeper Greater tapping depth can be achieved based on combination. Product Pickup AT-1 A-TAP ADADO 24

26 Carbide Flat Drill (with oil hole) ADFO-3D 1 NEW Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE EgiAs h8 20 ABOUT 20 SHRINK FIT SPEED FEED P30 No B 7, B 7, B 7, B 7, B 7, B 7, B 7, B 7, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8, B 8,590 See p.6 for explanation of icons. No. 2 :mmunit:mm B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 9, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10,200 B=Standard stock item 25

27 No B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 10, B 11, B 11, B 11, B 11, B 11, B 11, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 12, B 13, B 13, B 13, B 13, B 13, B 13, B 14, B 14,100 No. 2 :mmunit:mm B 14, B 14, B 14, B 14, B 14, B 14, B 14, B 14, B 14, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 15, B 16, B 16, B 16, B 16, B 16, B 16, B 17, B 17, B 17, B 17, B 17, B 20, B 20, B 20, B 20, B 20,100 B=Standard stock item =20191 =Available from January

28 Carbide Flat Drill (with oil hole) ADFO-3D 1 NEW Drills may have some discoloration, but it does not cause any performance problems. 2 CARBIDE No. EgiAs h8 20 ABOUT 20 SHRINK FIT B 20, B 20, B 20, B 20, B 20, B 20, B 24, B 24, B 24, B 24, B 24, B 24, B 24, B 24, B 24, B 24, B 27, B 27, B 27, B 27, B 27, B 27,000 See p.6 for explanation of icons. SPEED FEED P30 No. 2 :mmunit:mm B 27, B 27, B 27, B 27, B 30, B 30, B 30, B 30, B 30, B 30, B 30, B 30, B 30, B 30, B 41, B 41, B 43, B 43, B 47, B 47, B 53, B 53,500 B=Standard stock item =20191 =Available from January

29 Cutting Condition ADF-2D Work Material Cutting Drill Dia. (mm) ow Carbon SteelMild SteelAlloy Steel C<0.3% SS400SCM 710N/mm 2 Carbon Steel S35CS50C 210HB 710N/mm 2 Alloy Steel SCMSCrSNCM 28 35HRC 900 1,100N/mm 2 Plastic Mold Steel NAK80 40HRC Stainless Steel SUS N/mm m/min m/min 30 90m/min 20 40m/min 10 30m/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Work Material Cutting Drill Dia. (mm) Special Alloy SteelHardened Steel Prehardened Steel 45HRC Cast Iron FC N/mm 2 Ductile Cast Iron FCD N/mm 2 Aluminum A5052A N/mm 2 Aluminum Alloy AC4CADC N/mm m/min m/min 30 80m/min m/min m/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Water-soluble coolant may be applied as noted in the above table only under the premise that the work surface has been flattened by milling. 2. When using non-water-soluble or water-soluble coolant (over 20 times dilution), reduce cutting speed by 30%. 3. Use a rigid and precise machine and holder. 4. Please minimize overhang length as much as possible during machining. 5. Adjust the rotational speed and the feed in accordance with conditions such as the machining shape, machine rigidity, or work holding. 6. Please set up the drill so that the runout of the cutting edge is under 0.01 mm. 7. When machining an inclined plane, adjust the rotational speed and the feed in accordance with the angle of the incline (). When the machining incline angle () is less than 30, please reduce the feed to 40-60%. When the machining incline angle () is over 30, please reduce the speed to 60-80%, the feed to 40-60%. 8. Please use step drilling in pre-drilled holes to improve cutting chip separation. 9. If it is necessary to ensure the locating precision of the hole to be machined, adjust the rotational speed and the feed as indicated above (in accordance with the machining precision requirement). 10. For sizes under5, please use a machine with good spindle rotation accuracy. 11. If the machine in use cannot meet the specified values above, please set the rotation speed as high as possible. In this case, please note that durability may decrease. 28

30 Cutting Condition ADFS-2D Work Material Cutting Drill Dia. (mm) ow Carbon SteelMild SteelAlloy Steel C<0.3% SS400SCM 710N/mm 2 Carbon Steel S35CS50C 210HB 710N/mm 2 Alloy Steel SCMSCrSNCM 28 35HRC 900 1,100N/mm 2 Plastic Mold Steel NAK80 40HRC m/min m/min 30 90m/min 20 40m/min 3 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Work Material Special Alloy SteelHardened Steel Prehardened Steel 45HRC Cast Iron FC N/mm 2 Ductile Cast Iron FCD N/mm 2 Aluminum A5052A N/mm 2 Aluminum Alloy AC4CADC N/mm 2 Cutting 20 30m/min m/min 50 80m/min m/min m/min Drill Dia. (mm) 3 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , To process flat surfaces, prior center-drilling with a larger diameter is required. 2. Water-soluble coolant may be applied as noted in the above table only under the premise that the work surface has been flattened by milling. 3. When using non-water-soluble or water-soluble coolant (over 20 times dilution), reduce cutting speed by 30%. 4. Use a rigid and precise machine and holder. 5. Please minimize overhang length as much as possible during machining. 6. Adjust the rotational speed and the feed in accordance with conditions such as the machining shape, machine rigidity, or work holding. 7. Please set up the drill so that the runout of the cutting edge is under 0.01 mm. 8. When machining an inclined plane, adjust the rotational speed and the feed in accordance with the angle of the incline (). When the machining incline angle () is less than 30, please reduce the feed to 40-60%. When the machining incline angle () is over 30, please reduce the speed to 60-80%, the feed to 40-60%. 9. Please use step drilling in pre-drilled holes to improve cutting chip separation. 10. If it is necessary to ensure the locating precision of the hole to be machined, adjust the rotational speed and the feed as indicated above (in accordance with the machining precision requirement). 29

AQUA DRILL EX FLAT SERIES

AQUA DRILL EX FLAT SERIES AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,

More information

AQUA Drill EX FLAT Series New Drilling Technology

AQUA Drill EX FLAT Series New Drilling Technology AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long

More information

High Efficiency Drilling in Various Types of Machining

High Efficiency Drilling in Various Types of Machining TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling

More information

MHS TOOLS NEWS B137G. Drills for die & mould machining

MHS TOOLS NEWS B137G. Drills for die & mould machining TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need

More information

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different

More information

TDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL

TDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features

More information

AquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry

AquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize

More information

AQUA DRILL EX OIL-HOLE LONG

AQUA DRILL EX OIL-HOLE LONG AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient

More information

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12. Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G

TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.

More information

KGD for Automatic Lathe

KGD for Automatic Lathe Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535

More information

Drilling Depth ( L / D) Content

Drilling Depth ( L / D) Content Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole

More information

2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features

2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels

More information

MHS. Drills for die & mold machining B137A

MHS. Drills for die & mold machining B137A 2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the

More information

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with

More information

S-TAW. Changeable Carbide Insert Type Drill

S-TAW. Changeable Carbide Insert Type Drill News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54

More information

SC series(twist drill) for machining of cast iron, Al alloy

SC series(twist drill) for machining of cast iron, Al alloy C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200

More information

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips

More information

EZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison

EZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder

More information

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened

More information

Reduced Chip Biting Issues when Grooving Small Parts

Reduced Chip Biting Issues when Grooving Small Parts Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application

More information

High Efficiency Drilling in Various Types of Machining

High Efficiency Drilling in Various Types of Machining TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling

More information

TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.

TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill. TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter

More information

NHD - Improved Solid Carbide Drill

NHD - Improved Solid Carbide Drill February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills

More information

SAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol

SAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless

More information

MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE

MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with

More information

TR4D. High Feed Radius Mill. New Product News No. H1901A

TR4D. High Feed Radius Mill. New Product News No. H1901A TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel

More information

Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified

Solid Carbide Tools. Drilling Solutions. New Expanded Offering.   ISO 9001 Certified Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling

More information

Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium

Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for

More information

WDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D

WDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking

More information

WDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D

WDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking

More information

Specializing In High Performance Solid Carbide Cutting Tools

Specializing In High Performance Solid Carbide Cutting Tools Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for

More information

M.A.FORD Where high performance is the standard.

M.A.FORD Where high performance is the standard. For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,

More information

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated

More information

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information

Threading tools to JIS standard

Threading tools to JIS standard Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket

More information

MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction

MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate

More information

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high

More information

PRODUCT CATALOG MAIN INDEX

PRODUCT CATALOG MAIN INDEX PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre

More information

CTR Counterboring Tools

CTR Counterboring Tools CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land

More information

Drills Jobber, R40 UNI

Drills Jobber, R40 UNI Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87

More information

Grooving Tool Holders GND Type

Grooving Tool Holders GND Type TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving

More information

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing

More information

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies

More information

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr

More information

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating

More information

GStype/HGStype/WGStype

GStype/HGStype/WGStype Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing

More information

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even

More information

Heat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.

Heat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia. SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.

More information

No: LPD 12mm~ 13.5mm SPD 13mm~ 22mm NPD 23mm~ 60mm NPD Cartridge 61mm~ 100mm. Through Coolant System

No: LPD 12mm~ 13.5mm SPD 13mm~ 22mm NPD 23mm~ 60mm NPD Cartridge 61mm~ 100mm. Through Coolant System No: 160-6 Features Excellent chip evacuation due to the specially designed flute - Special surface treatment of shank provides long durability - 4 cutting-edge using economical geometry of insert - Various

More information

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert! TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.

More information

Extremely small dimensions, extremely high precision.

Extremely small dimensions, extremely high precision. Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance

More information

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened

More information

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...

More information

Info Overview - solid carbide twist drills (I) Drilling Tools

Info Overview - solid carbide twist drills (I) Drilling Tools Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number

More information

Features. May 1, No. 204-M-02

Features. May 1, No. 204-M-02 May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges

More information

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change

More information

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than

More information

3 Cutting Edges Use GBA for Grooving

3 Cutting Edges Use GBA for Grooving CP188-E 3 Cutting Edges Use G for Grooving Wide Product Lineup PVD Coated for Steel / PR905 Smooth Chip evacuation due to no interference on the chip pocket External Grooving Internal Grooving G-MY New

More information

MFH-RAPT R High Feed Milling Cutter

MFH-RAPT R High Feed Milling Cutter MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

CERATIZIT designation system

CERATIZIT designation system C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,

More information

Table of Contents. Standard Taps

Table of Contents. Standard Taps Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw

More information

CoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant

CoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV

More information

TOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.

TOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes. TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank

More information

M.A.FORD Where high performance is the standard.

M.A.FORD Where high performance is the standard. Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid

More information

Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).

Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch). igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes

More information

Machining Intelligently

Machining Intelligently ISCAR s Solutions for Manufacturing Turbochargers Machining Intelligently ISCAR HIGH Q LINES www.iscar.com Turbocharger Industries Turbine Housing Compressor Housing Turbine Wheel Bearing Housing In today

More information

Standard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.

Standard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade. The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER

More information

Improved Grooving Performance with Expansive Tooling System Lineup

Improved Grooving Performance with Expansive Tooling System Lineup KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD

More information

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2

More information

A revolution in stainless steel turning

A revolution in stainless steel turning ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic

More information

AD-2D NEW Drilling Solid carbide 2xD

AD-2D NEW Drilling Solid carbide 2xD l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:

More information

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) ** System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole

More information

Silver fox -New indexable drills for shallow holes

Silver fox -New indexable drills for shallow holes Silver fox -New indexable drills for shallow holes 1 Internal coolant hose connecter, which is used in lathe. 2 New tool body material with greatly improved tool rigidity. 3 Tool body with specially treated

More information

DRILL INSERTS & HOLDERS

DRILL INSERTS & HOLDERS DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts

More information

Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.

Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM

More information

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page... group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

2017 NORTH AMERICA TAPS EDITION

2017 NORTH AMERICA TAPS EDITION 2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

Solid carbide Twist Drills Overview

Solid carbide Twist Drills Overview Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ

More information

TAPER AND DEBURRING COUNTERSINKERS

TAPER AND DEBURRING COUNTERSINKERS TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because

More information

Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.

Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS. KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS

More information

Vol. 2 HY-PRO SHRINK

Vol. 2 HY-PRO SHRINK Vol. 2 HY-PRO SHRINK Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the

More information

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06

More information

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch). igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30

More information

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance

More information

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent ) SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the

More information

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form. MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING

More information

No. of Holes. Drill Dia. (in.)

No. of Holes. Drill Dia. (in.) UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast

More information

Special drills 88 PRECISION TOOLS

Special drills 88 PRECISION TOOLS SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information