Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6

Transcription

1 tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page ircle cutters T-A Insert drilling system system GEN3SYS From page Solid drilling tool SARA-RI Solid drill bits for ISO inserts and turning tool SARA-UT From page Press-polish tools Page Hand taps Machine tap Threading die From page ountersinks, deburring countersinks, piloted counterbores, reverse countersinks Indexable countersink inserts rill hole deburring tools Adjustable precision boring bars Reamers From page ANREA MH- Modular tool system From page

2 Suary of icons used for drilling and boring tools utting HSS HSS-E HSS-o PM Solid carbide (VHM) arbide (HM) e.g. HSS-o5 = High-performance, high-speed steel with 5% cobalt Type Type N Type VA Type W Type N* Type NV Type H Type TP N W NV TP VA N * H standard drill for universal applications Twist drill for universal applications in soft, long-chipping s standard drill with reinforced core and increased heat resistance Twist drill with deep hole section for advancement of the chip removal in the case of deep drill holes Twist drill for VA machining Type N with three cutting edges and wider grooves Twist drill for hardened steels Standard IN ISO specification of standard that the tool meets, e.g. IN 338, Werksnorm = ompany standard Jaw quantity Number of cutting edges Shank design e.g. straight, with whistle notch clamping surface, Morse taper, SS Point angle for drills, counterbores, countersinks etc. Spiral angle 40 for drills, reamers, etc. e.g. 40 right-hand twist ountersink angle for centring drills, e.g. 60 Thread M MF G UNF BSW NPT UN e.g. MF = metric fine thread e.g. 60 thread angle Tolerance H7 ISO 2 6H e.g. ISO 2 6H = Metric ISO thread, application class 2, medium tolerance 6H Version for manufacturing blind-hole threads or through-hole threads version with internal coolant supply Information Vc/fz You can find further information such as cutting data recoendations in the Sartorius Engineering Handbook no or at Usage recoendations image (example) If various cutting s or coatings are offered, the usage recoendation in that specific case relates to the higher-quality version. < 700 N/ 2 steel hardened steel stainless steel cast iron titanium superalloys Fe/Nio base aluminium copper graphite < 1000 N/ 2 < 1400 N/ 2 < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-2

3 entring drill form A short, long and extra-long IN 333 or company standard Type A Shank version: cylindrical S = point angle 118 ountersink angle 60 utting HSS, HSS/o5 TiAlN-coated Plain type for centre holes without protected centre according to IN and 0.8, one cutting edge Fig. form A short, IN h8 1 HSS HSS o5 TiAlN 0,5 3, ,6-0, ,8 3, ,0-1, ,0 3,15 31,5 1,3-1, ,25 3,15 31,5 1,6-2, ,6 4 35,5 2,0-2, , ,5-3, ,5 6,3 45 3,1-3, , ,9-4, , ,0-5, ,0 12,5 63 6,3-7, , ,0-8, , ,1-11, , ,8-13, entring drill set, HSS, short, IN333A ontents 3 Piece 1.6 x 4.0, 3 pcs x pcs. 2.0 x 5.0 ; 2 pcs. 4.0 x pcs. 2.5 x 6.3 ; 1 pcs. 5.0 x 12.5 HSS long, company standard 1 h8 1 HSS o5 0, ,0-1, , ,3-1, , ,0-2, , ,5-3, , ,1-3, , ,9-4, , ,0-5, , ,3-7, overlong, company standard 1 h8 1 HSS o5 2, ,5-3, , ,1-3, , ,9-4, , ,0-5, steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-3

4 entring drill form B Type B Shank version: cylindrical, S = point angle 118, ountersink angles 60 /120º utting HSS for bell-shaped centre holes 60 and 120 with protected centre Application of the workpiece to the centre point over a large surface area with the advantages of a bell-type countersink Suitable for workpieces on which deformation tensions occur during machining 1 h8 1 1, ,3-1, Fig. form B 1, ,6-2, , ,0-2, , ,5-3, , ,1-3, , ,9-4, , ,0-5, , ,3-7, , ,0-8, steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Radius centring drill form R Form R Shank version: cylindrical, S = point angle 118, ountersink angle 60 utting HSS entring bores with radius combine an annular application of the workpiece at the centre point with the advantages of a bell-type countersink Suitable for workpieces on which deformation tensions occur during machining 1 h8 R 1 1, ,0-3, , ,3-3, , ,2-4, , ,0-5, , ,3-6, , ,0-8, , ,0-10, , ,5-13, , ,0-16, steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Fig. form R Solid carbide centring drill form A Type A Shank version: cylindrical, S = point angle 120, ountersink angle 60 utting solid carbide K10 with application of the workpiece to the centre point over a large surface area suitable for heavy workpieces when using revolving centre points 1 h8 1 1, ,3-1, Fig. form A 1, ,6-2, , ,0-2, , ,5-3, , ,1-3, , ,9-4, , ,0-5, , ,3-7, steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-4

5 N spot drill HSS/o S = point angle 90 or 120, Shank version: cylindrical Precision point geometry with slender chisel edge High stability due to short chip fl utes utting HSS o5, HSS/o5 TiN-coated For fast drilling on N/N machines and machining centres at precise positions short TiN-coated TiN-coated TiN-coated long steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite alloys < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide N spot drill S = point angle 90 or 120 Shank version: cylindrical helically fl uted utting solid carbide K10 For fast drilling on N/N machines and machining centres at precise positions , , , , , , , , steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide N spot drill, coated S = point angle 90 and 142 Straight shank with diameter up to 5.0 and clamping surface starting from 6.0 diameter in accordance with IN6535-HB utting, solid carbide superfine grain TiAlN-ultra-coated Spot drilling and countersinking on N and N machines esign with point angle of 142 for spot drilling , , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite steelhardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-5

6 Twist drill IN 338 Sorted by IN brand Roll-milled Ground bare AU eep-hole section eep-hole section eep-hole section eep-hole section VA diameter range / 1.0 to to to to to to to to to to to to to 12.0 type N N N W N TP TP TP TP VA NV N point angle cutting HSS HSS HSS HSS HSS/o HSS HSS/o HSS/o HSS/o HSS/o HSS/o HSS-E-PM Solid carbide coating vap. TiAlN TiN vap. TiN catalogue page 10-8/9 10-8/9 10-8/ / / / / / groups Usage recoendations steel < 700 N/ 2 steel < 1000 N/ 2 steel < 1400 N/ 2 hardened steel < 55 HRc hardened steel < 60 HRc hardened steel 60 HRc stainless steel ferritic / martensitic stainless steel austenitic stainless steel duplex cast iron GG/GTS cast iron GGG titanium alloys superalloys Fe/Nio base < 30 HRc superalloys Fe/Nio base 30 HRc aluminium < 8 % Si aluminium 8 % Si copper u-alloy graphite GRP/FP/thermoset Hardox 450 Twist drill IN 338 IN 340 IN 341 IN 343 IN 344 IN 345 IN 1869 Sorted by IN brand VA eep-hole section ore drill ore drill Series 1 to 3 diameter range / 1.0 to to to to to to to to to to to to 10.0 type N N VA TP N N N N N N N TP point angle cutting Solid carbide Solid carbide HSS/o HSS HSS HSS HSS HSS HSS/o HSS HSS HSS coating TiN TiAlN TiN vap. vap. vap catalogue page groups Usage recoendations steel < 700 N/ 2 steel < 1000 N/ 2 steel < 1400 N/ 2 hardened steel < 55 HRc hardened steel < 60 HRc hardened steel 60 HRc stainless steel ferritic / martensitic stainless steel austenitic stainless steel duplex cast iron GG/GTS cast iron GGG titanium alloys superalloys Fe/Nio base < 30 HRc superalloys Fe/Nio base 30 HRc aluminium < 8 % Si aluminium 8 % Si copper u-alloy graphite GRP/FP/thermoset 10-6

7 IN 1897 IN 1898A IN 1899 IN 6535K IN 6537 IN 6539 eep-hole section eep-hole section From 0.05 S-lass Up to 3x / 5x 8x Up to 3x Up to 3x, I Up to 5x, I 1.0 to to to to to to to to to to to to to to to to 16.0 N TP N N Ultra-M INOX-RI N N N N N HSS/o HSS/o HSS HSS/o HSS/o HSS-E-PM HSS HSS-E-PM Solid carbide K10F Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide vap. vap. TiN X-Alr TiN AlTiN TiAlN-Ultra-M TiAlN TiAlNplus TiAlNplus TiAlNplus TiN to / / / Usage recoendations IN 6539 IN 8037 ompany standard ountersink/counterbore ountersink/counterbore arbide-fitted Shank diameter 12.7 GS / GR GS / GR TX Micro-drill Hard drill Up to 7x, I Up to 7x, I Up to 12x, I Up to 10x, I Up to 5x / 8x 1.0 to to to to bis to to to to to to to to to to 20.0 N N*) N*) N N EX-SUS NEXUS H N N TP to Solid carbide Solid carbide Solid carbide Solid carbide K10 HSS HSS-E-V3 HSS HSS/o Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide TiAlN TiN vap. TiN WI TM WX TiAlN TiAlN TiAlN TiAlN TiAlN TiAlN aluminium / Usage recoendations All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-7

8 Twist drill HSS 118 Shank version: cylindrical utting HSS roller-milled with bare surface for production profi le ground, from Ø 2.3 vaporised, point thinning from Ø >1 Roll-milled Bare surface vaporized h8 1 Roll-milled Bare surface vaporized 0, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 Roll-milled Bare surface vaporized 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

9 h8 1 Roll-milled Bare surface vaporized 12, , , , , , , , , , , , , h steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset 1 Roll-milled Bare surface vaporized 15, , , , , , , , , , , , , Twist drill HSS 130 without accurate centring Shank version: cylindrical S = point angle 130 utting HSS, HSS/o5, HSS/o5 TiN, HSS/o5 TiAIN Type N, HSS/o5 Type TP, HSS HSS/o5, TiAlN Type TP, HSS/ o5 HSS/o5,TiN h8 1 Type N, HSS/o5 Type TP, HSS HSS/o5, TiAlN Type TP, HSS/ o5 HSS/o5,TiN 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-9

10 h8 1 Type N, HSS/o5 Type TP, HSS HSS/o5, TiAlN Type TP, HSS/ o5 HSS/o5,TiN 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

11 Alu INOX Type W, HSS Type VA, HSS/o5 Especially for AU and INOX machining h8 1 Type W, HSS Type VA, HSS/o5 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Type N, HSS/o5 Type TP, HSS HSS/o5, TiAlN Type TP, HSS/ o5 HSS/o5,TiN Type W, HSS Type VA, HSS/o5 h8 1 Type W, HSS Type VA, HSS/o5 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-11

12 Twist drill HSS 135 without accurate centring IN 338 Shank version: cylindrical S = point angle 135 utting HSS/o8 vap. h8 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 7, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flew precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools

13 Twist drill solid carbide 118 IN 338 S = point angle 118 utting solid carbide, solid carbide TiN, solid carbide TiAlN h8 1 Solid carbide, uncoated VHM TiN VHM TiAlN 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Solid carbide, uncoated VHM TiN VHM TiAlN h8 1 Solid carbide, uncoated VHM TiN VHM TiAlN 5, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-13

14 Twist drill sets IN338 type N Kits in cartridges Shank version: cylindrical S = point angle 130 conical jacket bevel Ø tolerance h8 utting HSS, HSS/o Profi le ground, from Ø 2.3 vaporised, point thinning from Ø >1 Especially suited for mounting work since the twist drills do not get mixed up when the cartridge is closed Number of drills HSS Roll-milled HSS Bare surface HSS Profile ground HSS/o5 Profile ground Empty cartridge 1.0 Up to 5.9 Ø - increasing by Up to 10.0 Ø - increasing by Up to 10.0 Ø - increasing by Up to 13.0 Ø - increasing by Up to 10.5 Ø - increasing by 0.5 with the following additional dimensions for threaded holes: Ø steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset HSS Roll-milled HSS/o5 Profi le ground Twist drill IN1897 Type N S = point angle 118 or 130 (self-centring) shank design: Straight utting HSS vap., HSS/o5 vap. HSS Point angle 118 HSS/o5 point angle 130 h8 1 HSS vap. 118 HSS/o5 vap , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 HSS vap. 118 HSS/o5 vap , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

15 h8 HSS vap. 118 HSS/o5 vap HSS vap. 118 HSS/o5 vap , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset 1 HSS vap. 118 HSS/o5 vap , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Twist drill for Hardox machining S = point angle 135 (self-centring) Shank version: cylindrical Reduction of the cutting edge wear due to Alr-coating utting HSS/o5, X-Alr-coated Registered trademark of SSAB Hardox 450 h8 1 2, , , , , , , , , , All prices in euro, VAT excluded h8 1 6, , , , , , , , , , h8 1 10, , , , , , , , , , Prices in bold print = delivery ex stock 10-15

16 Twist drill IN1897 Type TP Shank version: cylindrical S = point angle 130 (self-centring) utting HSS o5, HSS/o5 TiN HSS/o5 Type TP HSS/o TiN h8 1 HSS/o5 Type TP HSS/o5 TiN 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , HSS/o5 Type TP HSS/o5 TiN h8 1 HSS/o5 Type TP HSS/o5 TiN 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Superalloys Fe/Nio-based Aluminium opper Graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset

17 Twist drill HSS IN1869 TP IN 1869 Shank version: cylindrical S = point angle 130 utting HSS h8 1 Series 2, , , , , , , , , , , , h8 1 Series 5, , , , , , , , , , , , h8 1 Series 7, , , , , , , , , , , , Superalloys Fe/Nio-based Aluminium opper Graphite steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset Miniature twist drill IN 1899 Shank version: cylindrical S = point angle 118 utting HSS-E-PM from Ø 0.05 h , ,4 1, , ,5 1, , ,7 1, , ,0 1, , ,8 1, , ,2 1, , ,2 1, , ,8 1, , ,6 1, , ,6 1, , ,0 1, h , ,5 1, , ,5 1, , ,0 1, , ,6 1, , ,6 1, , ,3 1, , ,3 1, , ,1 1, , ,1 1, , ,0 1, , ,0 1, h , ,6 1, , ,0 1, , ,5 1, , ,0 1, , ,2 1, , ,5 1, , ,5 1, , , , steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium 1104 opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset Twist drill HSS WN 118, offset shank ompany standard Shank version: cylindrical S = point angle 118 utting HSS vap. h , , , , , , , , , , , , , , h , , , , , , , , , , , , , , with offset shank h , , , , , , , , , , steel hardened steel stainless steel cast irontitanium Superalloys Fe/Nio-based Aluminium opper Graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-17

18 Pin hole drill HSS IN1898A 118 utting edges with conical gradient and chip-breaking fl utes Used to drill conical drill holes 1:50 for taper pins in compliance with ISO 2339 (IN 1) and ISO 8736 (IN 7978) in one work step. Important: drill using a low feed rate utting HSS further sizes available on request min. max. 1 1 e9 1,5 1,4 2, , ,0 1,9 2, , ,5 2,4 3, , ,0 2,9 4, , ,0 3,9 5, , min. max. 1 1 e9 5,0 4,9 6, , ,0 5,9 8, , ,0 7,9 10, , ,0 9,9 13, , ,0 11,8 16, , Superalloys Fe/Nio-based Aluminium opper Graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/Thermoset High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flow precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools

19 Twist drill solid carbide IN6539N IN 6539 Shank version: cylindrical S = point angle 118 utting solid carbide, solid carbide TiN, solid carbide TiAIN Solid carbide, uncoated VHM TiN VHM TiAlN h8 1 Solid carbide, uncoated VHM TiN VHM TiAlN 0, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Solid carbide, uncoated VHM TiN VHM TiAlN h8 1 Solid carbide, uncoated VHM TiN VHM TiAlN 5, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-19

20 3-edged drill ompany standard 3 cutting edges, with wider fl utes Shank version: cylindrical S = point angle 150 uttingm aterial solidc arbide, solid carbide/tin uncoated TiN-coated h8 1 Solid carbide, uncoated Solid carbide TiN-coated 3, , , , , , , , , , , , , , , , Solid carbide, uncoated Solid carbide TiN-coated h8 < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 1 Solid carbide, uncoated Solid carbide TiN-coated 7, , , , , , , , , , , , , , , , Twist drill HSS IN340N 118 IN 340 Shank version: cylindrical S = point angle 118 utting HSS vap. h8 1 0, , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 6, , , , , , , , , , , , , , , , , , , , , , , , , , , ,

21 h8 1 9, , , , , , , , h8 1 9, , , , w , , , , h8 1 12, , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Twist drill HSS/o IN Shank version: cylindrical S = point angle 130 utting HSS TiN, HSS/o5 eep-hole section INOX h8 1 Type TP, HSS.TiN-coated Type VA, HSS/o5 1,0 56,0 33, ,1 60,0 37, ,2 65,0 41, ,3 65,0 41, ,4 70,0 45, ,5 70,0 45, ,6 76,0 50, ,7 76,0 50, ,8 80,0 53, ,9 80,0 53, ,0 85,0 56, ,1 85,0 56, ,2 90,0 59, ,3 90,0 59, ,4 95,0 62, ,5 95,0 62, ,6 95,0 62, ,7 100,0 66, ,8 100,0 66, ,9 100,0 66, ,0 100,0 66, ,1 106,0 69, ,2 106,0 69, ,3 106,0 69, ,4 112,0 73, ,5 112,0 73, ,6 112,0 73, ,7 112,0 73, ,8 119,0 78, ,9 119,0 78, ,0 119,0 78, ,1 119,0 78, ,2 119,0 78, ,3 126,0 82, ,4 126,0 82, ,5 126,0 82, ,7 126,0 82, ,8 132,0 87, Type TP, HSS.TiN-coated Type VA, HSS/o5 h8 1 Type TP, HSS.TiN-coated Type VA, HSS/o5 4,9 132,0 87, ,0 132,0 87, ,1 132,0 87, ,2 132,0 87, ,3 132,0 87, ,4 139,0 91, ,5 139,0 91, ,6 139,0 91, ,7 139,0 91, ,8 139,0 91, ,9 139,0 91, ,0 139,0 91, ,1 148,0 97, ,2 148,0 97, ,3 148,0 97, ,4 148,0 97, ,5 148,0 97, ,6 148,0 97, ,7 156,0 102, ,8 156,0 102, ,0 156,0 102, ,5 156,0 102, ,7 165,0 109, ,8 165,0 109, ,0 165,0 109, ,1 165,0 109, ,2 165,0 109, ,4 165,0 109, ,5 165,0 109, ,0 175,0 115, ,5 175,0 115, ,8 184,0 121, ,0 184,0 121, ,2 184,0 121, ,5 184,0 121, ,0 195,0 128, ,5 195,0 128, ,0 205,0 134, superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-21

22 Twist drill HSS, HSS/o, vaporised IN345N 118 IN 345 Shank version: MT S = point angle 118 utting HSS, HSS vap., HSS/o5 vap. HSS, roll-milled HSS, vaporised HSS/o5, vaporised h8 1 Shank design HSS HSS, vaporised HSS/o5, vaporised 5, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK HSS HSS, vaporised HSS/o5, vaporised h8 1 Shank design HSS HSS, vaporised HSS/o5, vaporised 22, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

23 Twist drill HSS IN341N 118 IN 341 Shank version: MT S = point angle 118 utting HSS h8 1 Shank design 10, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK h8 1 Shank design 24, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset ore drill HSS IN344N Shank version: cylindrical 3 cutting edges Straight shank with driving pin lug in accordance with IN 1809 for use in collets utting HSS for drilling pre-drilled, pre-cast or pre-punched holes The stable design as well as the 3 cutting edges cause alignment inaccuracies and unroundness of the prefabricated holes to be corrected. h8 1 Pre-drill min. Ø 1 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-23

24 ore drill HSS IN343N Shank version: MT 3 cutting edges Morse taper shank with driving pin lugs in accordance with IN228 Robust drill with strong core for optimum guidance in the bore hole utting HSS for drilling pre-drilled, pre-cast or pre-punched holes The stable design as well as the 3 cutting edges cause alignment inaccuracies and unroundness of the prefabricated holes to be corrected. h8 1 Pre-drill min. Ø Shank design 7, ,6 MK , ,6 MK , ,3 MK , ,0 MK , ,0 MK , ,7 MK , ,7 MK , ,4 MK , ,4 MK , ,1 MK , ,1 MK , ,8 MK , ,8 MK , ,5 MK , ,5 MK , ,2 MK , ,2 MK , ,9 MK , ,9 MK , ,6 MK , ,6 MK , ,3 MK , ,3 MK , ,0 MK , ,0 MK , ,6 MK , ,6 MK h8 1 Pre-drill min. Ø Shank design 21, ,3 MK , ,3 MK , ,0 MK , ,0 MK , ,6 MK , ,6 MK , ,3 MK , ,3 MK , ,0 MK , ,0 MK , ,6 MK , ,3 MK , ,3 MK , ,0 MK , ,5 MK , ,5 MK , ,0 MK , ,0 MK , ,0 MK , ,0 MK , ,0 MK , ,0 MK , ,5 MK , ,5 MK , ,0 MK , ,0 MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flow precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools

25 High-speed drill TX HSS/o WN 120 Shank version: cylindrical S = point angle 120 Flat fl ute for increased chip space New chip fl ute structure for enhanced chip removal, polished groove with wave forms Newly developed point thinning for a lower torque, axial force and friction New heat and wear-resistant WX coating with a very low friction coeffi cient utting HSS/o, WX-coated Use with water-soluble emulsion recoended depth 15 x and 20 x without internal cooling Pilot hole recoended hip fl ute form 15 x 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , x 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-25

26 Automated high-speed short-chip drill HSS-E PM IN S = point angle 130 (self-centring) ow wear on the cutting edges Especially resistant to high temperatures Extended service life Excellent chip removal Short chips utting HSS-E-PM, TiN-coated h8 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 7, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us 10-26

27 High-speed short-chip drill HSS-E PM IN S = point angle 130 (self-centring) ow wear on the cutting edges Especially resistant to high temperatures Extended service life Excellent chip removal Short chips utting HSS-E-PM, TiN-coated h8 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 1 7, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 1106 All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-27

28 Twist drill EX-SUS-GS large chip spaces, high toughness Reduced heat development Shank version: cylindrical from Ø 12.1 with driving plane according to IN1835B S = point angle: < Ø 2 = 140, Ø 4 = 130, > Ø 4 = 120 utting HSS-E-V3, TiN-coated entre geometry: up to Ø 13 S-design, from Ø 13.5 N-design available on request: Intermediate sizes from Ø 0.5 to Ø 6 (in 0.01 increments) h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-28

29 Twist drill EX-SUS-GR large chip spaces, high toughness Reduced heat development Shank version: cylindrical from Ø 12.1 with driving plane according to IN1835B S = point angle: Ø 4 = 130, > Ø 4 = 120 utting HSS-E-V3, TiN-coated entre geometry: up to Ø 13 S-design, from Ø 13.5 N-design available on request: Intermediate sizes from Ø 2.0 to Ø 6 (in 0.01 increments) h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-29

30 High-speed drill NEXUS Spiral angle with a strong twist (35-40 ) and unique fl ute forms reduce the cutting forces and the heat generated during machining Short breakage chips even with tough s such as INOX or copper Shank version: cylindrical S = point angle: < Ø 2 = 140, Ø 4 = 130, > Ø 4 = 120 utting : high-quality vanadium-alloy HSS-WI -coated, new multi-layer coating, wear-resistant, suited for a broad range of s aption GS, short h8 S 1 1 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 S 1 1 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h8 S 1 1 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , GR, long h8 S 1 1 2, , , , , , , , , , , h8 S 1 1 4, , , , , , , , , , , h8 S 1 1 8, , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

31 Twist drill carbide-fitted IN S = point angle 118 Shank version: ylindrical, with driving pin according to IN 1809 for use collets utting of cutting element: Solid carbide K10 Solid carbide cutting edge with four-facet ground tip Intermediate sizes are available on request h , , , , , , , , h , , , , , , , , h , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Twist drill solid carbide Sigma-rill-Hard ompany standard Shank version: cylindrical S = point angle 140 Spiral angle 15 utting solid carbide, superfine grain, Z-TiAlN-coated 5x for hardened s up to 70 HRc excellent wear-resistance and tensile strength properties Special point thinning of the chisel edge for hardened s, preventing chunking in the centre additional corner radius, which prevents chunking at the outer cutting edge h7 1 1 h6 2, , , , , , , , , , h7 1 1 h6 2, , , , , , , , , , h7 1 1 h6 6, , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded h7 Prices in bold print = delivery ex stock 1 1 h

32 N O U VEAU N UEVO Micro-high-speed drill, solid carbide, WN 118/130 NEW NUOVO NY S = point angle 130, 118 bis Ø 0.35 Straight shank in accordance with IN 6535 HA Spiral angle 30 utting, solid carbide superfine grain TiAlN Tolerance = h6 1 0,10 3,0 38 1, ,15 3,0 38 2, ,20 3,0 38 2, ,25 3,0 38 4, ,30 3,0 38 5, ,35 3,0 38 5, ,40 3,0 38 6, ,45 3,0 38 6, ,50 3,0 38 6, ,55 3,0 38 8, ,60 3,0 38 8, ,65 3,0 38 8, ,70 3,0 38 8, ,75 3,0 38 8, ,80 3,0 38 8, ,85 3,0 38 8, ,90 3,0 38 8, ,95 3,0 38 8, ,97 3,0 38 8, ,98 3,0 38 8, ,99 3,0 38 8, ,00 3, , ,01 3, , ,02 3, , ,03 3, , ,05 3, , ,10 3, , ,15 3, , ,20 3, , ,25 3, , ,30 3, , ,35 3, , ,40 3, , ,45 3, , ,47 3, , ,48 3, , ,49 3, , ,50 3, , ,51 3, , ,52 3, , ,53 3, , ,55 3, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 1 h6 1 1,60 3, , ,65 3, , ,70 3, , ,75 3, , ,80 3, , ,85 3, , ,90 3, , ,95 3, , ,97 3, , ,98 3, , ,99 3, , ,00 3, , ,01 3, , ,02 3, , ,03 3, , ,05 3, , ,10 3, , ,15 3, , ,20 3, , ,25 3, , ,30 3, , ,35 3, , ,40 3, , ,45 3, , ,50 3, , ,51 3, , ,52 3, , ,53 3, , ,55 3, , ,60 3, , ,65 3, , ,70 3, , ,75 3, , ,80 3, , ,85 3, , ,90 3, , ,95 3, , ,96 3, , ,97 3, , ,98 3, , ,99 3, , ,00 3, , High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flew precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools

33 Twist drill, solid carbide IN6535K 145 S-lass IN 6535K Shank version: cylindrical Reinforced shank according to IN 6535 HA S = point angle = usable length utting, solid carbide superfine grain AlTiN-coated Shank diameter tolerance constricted for fi tting into hydraulic expansion chucks double guide chamfers for a high degree of stability and enhanced coolant supply Regrinding on conventional grinding machines possible in stainless steels, low-alloy steels, high-alloy steel, Inconel, titanium and grey cast iron Material: 42rMo4 example Ø 10 : Vc = 140 m/min Vf = 1600 /min Tapping hole 3, , , , M4 (4x0.7) , , , , M4.5 (4.5x0.75) , , , , , M5 (5x0.8) , , , , , , , , M6(6x1) , , , , , , , , , , , M7 (7x1) , , , , , , , , , M8 (8x1.25) , , x , , , , , , , , M9 (9x1.25) , , , , , Tapping hole 8, , M10 (10x1.5) , , , M10x , , , , , , , M11x , , , , , , , M12 (12x1.75) , , , , , , M12x , , , , , , , , , , , , , M14 (14x2) , M14x , , , , M16(16x2) , M16x , , M18(18x2.5) , , M18x , , M20 (20x2.5) , , M20x , , M22 (22x2.5) , superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-33

34 N O U VEAU N UEVO High-speed drill, solid carbide IN6537 Ultra-M NEW NUOVO NY IN 6537 K and Special geometry, facet ground, maximum bit life distance, high process safety Shank version: HA with coolant bore, smooth straight shank, IN 6535 HA HE with coolant bore, straight shank, IN 6535 HE S = point angle 140 utting solid carbide, TiAlN-Ultra-M-coated True running accuracy of the tool when clamped max Especially suitable for Inox and superalloys 3 x 1 h6 1 HA with coolant bore HE with coolant bore 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h6 1 HA with coolant bore HE with coolant bore 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

35 N O U VEAU N UEVO NEW NUOVO NY 5 x 1 h6 1 HA with coolant bore HE with coolant bore 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h6 1 HA with coolant bore HE with coolant bore 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-35

36 Solid carbide high-speed drill INOX-RI Short breakage chips Shank version: cylindrical For accoodation in power chucks, hydraulic expansion chucks and shrink fi t holders S = point angle 140 utting, solid carbide ultra-fine grain, TiAlN-coated Special flute shape for excellent chip removal 8 x m7 1 h6 1 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , m7 1 h6 1 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , m7 1 h6 1 9, , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. Short chucks by ATORN: high-strength s perfect concentricity accuracy large clamping range high clamping force This is but one example of ATORN s high-quality clamping tools

37 High-speed drill solid carbide IN6537 type N 140, 3x IN 6537 Shank design: HE straight shank IN 6535 HE HE with coolant bore, straight shank IN 6535 HE HA with coolant bore, smooth straight shank, IN 6535 HA with optimized diameter tolerance of the shank for admission in power chucks and hydraulic expansion chucks up to 3 x, with and without coolant bore, short S = point angle 140 utting, solid carbide superfine grain TiAlNplus-coated 2-facet ground True running accuracy of the tool when clamped max without coolant bore HE with coolant bore HA with coolant bore m7 1 h6 1 3 HE without coolant bore HE with coolant bore HA with coolant bore 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-37

38 m7 1 h6 1 3 HE without coolant bore HE with coolant bore HA with coolant bore 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , without coolant bore HE with coolant bore HA with coolant bore < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-38

39 High-speed drill solid carbide IN6537 type N 140, 5x HE with coolant bore, straight shank IN 6535 HE HA with coolant bore, smooth straight shank, IN 6535 HA with optimized diameter tolerance of the shank for admission in power chucks and hydraulic expansion chucks up to 5 x, with coolant bore utting, solid carbide superfine grain TiAlNplus-coated m7 1 h6 1 3 HE with coolant bore HA with coolant bore True running accuracy of the tool when clamped max , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , m7 1 h6 1 3 HE with coolant bore HA with coolant bore 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-39

40 High-speed drill solid carbide IN6537 type N 140, 7x Shank design: HE with coolant bore, straight shank IN 6535 HE HA with coolant bore, smooth straight shank, IN 6535 HA with optimized diameter tolerance of the shank for admission in power chucks and hydraulic expansion chucks up to 7 x, with coolant bore S = point angle 140 utting, solid carbide superfine grain TiAlNplus-coated Good self-centring properties and generation of short chips Use on powerful machines with low-play spindles, tool holding fi xture with exact alignment True running accuracy of the tool when clamped max HA with coolant bore HE with coolant bore m7 1 h6 1 HA with coolant bore HE with coolant bore 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , m7 1 h6 1 HA with coolant bore HE with coolant bore 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-40

41 High-speed drill solid carbide IN6537 type N 140, 12x Shank version: HA with coolant bore, smooth straight shank, IN 6535 HA with optimized diameter tolerance of the shank for admission in power chucks and hydraulic expansion chucks up to 12 x, with coolant bore 2 facet ground, S = point angle 140 utting, solid carbide ultra-fine grain TiAlN-coated Also for tough and long-chipping cutting reliable chip fl ow due to adapted drill profi le and large chip chambers four guide chamfers for exactly aligned bores with good surface qualities True running accuracy of the tool when clamped max Pilot hole recoended m7 1 h6 1 4, , , , , , , , m7 1 h6 1 10, , , , , , , , , , , , , , , , , superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flow precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools. All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-41

42 Solid carbide high-speed drill FTO-GX Shank design: HA with coolant bore, smooth straight shank, IN 6535 HA optimized diameter tolerance of the shank, shrink fi t holder suited as holding fi xture up to 10 x, with coolant bore S = point angle 140 utting solid carbide, TiAlN-coated Powerful drill for the cost-effi cient manufacture of deep bores optimum chip removal due to special cutting geometry and large chip spaces True running accuracy of the tool when clamped max Pilot hole recoended Versions 15 x, 20 x and 30 x available on request! 1 1 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-42

43 Solid carbide high-speed drill AUSPEE Shank version: ylindrical, IN 6535HA twisted coolant bore S = point angle 135 Spiral angle 15 6-fold guide chamfer ensures very high alignment precision and stabilization of the drill utting solid carbide, superfine grain, aluminium -coated depth 5 x and 8 x Enables cutting data of up to Vc = 330 m/min. with maximum service life and process stability Absolute positioning precision with six margins Extremely low-friction aluminium coating Product video on Internal cooling 15º helix angle for process-safe chip removal 5 x m7 1 h6 1 2, , , , , , , , , , , , , , m7 1 h6 1 6, , , , , , , , , , , , , , m7 1 h6 1 11, , , , , , , , , , , , x m7 1 h6 1 2, , , , , , , , , , , , , m7 1 h6 1 6, , , , , , , , , , , , , m7 1 h6 1 11, , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-43

44 Step drill Straight shank conical jacket bevel Normal point angle (118 ) Point thinning according to IN 1412 form A ateral rake angle, centre thickness, centre rise and fl ute form normal Ø tolerance h8, other design features according to IN 1414 Note: The cutting speed depends on the large diameter, the feed rate, however, on the small diameter. HSS 90 IN 8378 For tapping holes according to IN 336, Part 1, and 90º countersinking in through-holes according to IN/ISO 273 (economic manufacture) for thread h9 2 h8 5 1 ountersink angle 90 M 3 3, M 4 4, M 5 5, M 6 6, M 8 9, M 10 11, HSS 90 IN 8374 for through-holes, ounterbore fine for producing through-holes according to IN/ISO 273 and screw head counterbores 90º, forms A and B according to IN 74, Part 1, for screws according to IN 963 and IN 964 for thread h9 2 h8 5 1 ountersink angle 90 M 3 6, M 4 8, M 5 10, M 6 11, M 8 15, M 10 19, HSS 180 IN 8376 for through-holes, ounterbore medium for producing through-holes according to IN/ISO 273 and screw head counterbores 180º more economically, forms H, J and K according to IN 74, Part 2, for screws according to IN 84, IN 912, IN 7513 and IN 7984 for thread h9 2 h8 5 1 ountersink angle 180 M 3 6, M 4 8, M 5 10, M 6 11, M 8 15, M 10 18, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-44

45 Solid carbide short step drill Straight shank according to IN 6535-HA Right hand cutting Point angle 140 Ø tolerance h8 utting solid carbide K40F, TiAlN-coated For the economic manufacture of bores and countersinks in one work step Tight circular true concentricity tolerance for exact alignment especially suited for N machines and automatic units Note: The cutting speed depends on the large diameter, the feed rate, however, on the small diameter. VHM 90 for core hole drilling Step length according to IN 8378 For screw through-holes IN-ISO 273 and countersinks according to IN 74-1 ountersunk bolts in compliance with ISO and IN for thread h8 2 h ountersink angle 90 M 3 3, M 4 4, M 5 5, M 6 6, M M M 12 13, VHM 180 for through-holes, Step length according to IN 8376 For screw through-holes according to IN-ISO 273 and countersinks according to IN 74, Bl.2 Form H, J and K, medium design; for screws according to IN 912, 6912 and 7984, ISO 1207 (IN 84) for thread h8 2 h ountersink angle 180 M 3 6, M 4 8, M 5 10, M 6 11, M 8 15, M 10 18, M 12 20, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-45

46 Precision cone drill bit Point angle 118 Total angle 20 Right hand cutting ylindrically ground / milled chip fl ute for absolutely smooth running and high cutting power utting HSS, HSS TiN Burr-free drilling and boring of sheet metal, pipes and sections No. 0 No. 1 No. 2 No. 3 No. 4 No. 6 No. 1 HSS HSS TiN-coated 0 3,0-14, ,0-20, ,0-30, ,0-40, ,0-50, ,0-30, Kits ontents HSS TiN-coated one drill bit no. 0,1,2 1 Tin of cutting paste < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Universal step drills and deburring in one work step two cutting edges and fi xed centring point twisted chip fl ute The exact bore diameter results from the cylindrical graduation, the polished section of the next stage deburs the next smaller bore diameter, point thinning according to IN 1412 utting HSS, HSS TiN especially suited for use on hand drills when drilling thin s; no need for pre-drilling or centre punching even with curved surfaces No. 1 No. 2 No. 3 Kits No. Number of steps 1 HSS HSS-TiN oated 1 4,0-12, ,0-20, ,0-30, ontents HSS HSS-TiN oated Each 1 step drill no < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-46

47 arbide masonry drill Robust masonry and concrete drill very high drilling performance and service life due to rotary haer drill head design ow-stress soldering method at 1100 Straight shank U-shaped fl ute utting made of hardened and tempered special steel with carbide cutting edge for use primarily in haer drills for drilling in concrete and masonry 1 3, , , , , , , , , Kit in plastic cartridge 1 10, , , , , , , , , ontents 5-piece 4,0 / 5,0 / 6,0 / 8,0 / 10, arbide haer drill bit SS-Plus mounting shank 4fold helix for optimum removal of bore hole cuttings entring point Utmost stability by core reinforcement utting, tough carbide metal for rotary haers with SS-Plus mounting shank and dual-groove holding fi xture Hilti TE for drilling in concrete, masonry or natural granite 1 4, , , , , , , , , , , , , , , , , , , , ,0 Kits in metal cartridge , , , , , , , , , , , , , , , , , , , , , ontents 7-piece 5x50 / 6x50 / 6x100 / 8x50 / 8x100 / 10x100 / 12x All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-47

48 Twist drill bits Type 6.3 hexagon drive extension 6.35 (1/4 ) utting HSS Individual twist drill bits Ø Total length Spiral length 1, , , , , , , , , , , , , , , , , , , , , , part kit 1126 ontents In plastic box: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 / 4,0 / 4,5 / 5,0 / 5,5 / 6,0 / 6,5 / 7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 9,5 / 10, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Single operation tapping bits Type 6.3 hexagon drive extension 6.35 (1/4 ) utting HSS Individual single operation tapping bits Total length Spiral length M M M M M M part kit ontents In plastic box: M part kit, with twist drill bits ontents In plastic box M , twist drill bits: 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5, 1 bit adapter < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

49 90 countersink bits Type 6.3 hexagon drive extension 6.35 (1/4 ) utting HSS 3 cutting edges Individual countersink bits Ø Total length 6, , , , , , part kit ontents In plastic box: 6,3 / 8,3 /10,4 / 12,4 / 16,5 / 20, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset ombination drill bits Type 6.3 hexagon drive extension 6.35 (1/4 ) utting HSS for cutting of tapping hole, threading and deburring in one work step for through-holes up to max. 1 x Individual combination drill bits 7-part kit Matevery Ø Total length M 3 2, M 4 3, M 5 4, M 6 5, M 8 6, M10 8, ontents In plastic box: M , 1 bit adapter < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Universal circle cutters Model range 2000, Ø Base body, cross-arm 50 (2050-5) for Ø-range of from can be extended up to Ø 250 through the use of longer cross-arms Twist drill 5 Ø, 1 blade (5A10), for thickness up to 10 Setting gauge, hollow hexagon wrench, completely in case further shank designs available on request Fig. shows Morse taper shank All prices in euro, VAT excluded model escription Similar to straight 10 Ø Similar to straight 13 Ø MK2 MK2 With tangs MK3 MK3 With tangs Prices in bold print = delivery ex stock 10-49

50 Model range 3000, Ø Base body, cross-arm 70 (3070-5) for Ø-range of can be extended up to Ø 300 through the use of longer cross-arms Twist drill 5 Ø, 1 blade (5A10), for thickness up to 10 Setting gauge, hollow hexagon wrench, completely in case further shank designs available on request model escription 3000-W20 WEON 20 Ø MK3 MK3 With tangs Fig. shows Morse taper shank ross-arm, 14 x 14 for model range 2000 model suitable blade type ross-arm, 22 x 22 for model range 3000 model suitable blade type HSS/o cutting edge for drilling holes model for thickness max. 5A A A V5A V5A V5A HSS/o cutting edge for making washers model for thickness max. 5I I I V5I V5I V5I ircle-cutter accessories and spare parts model escription suitable for model 2060 Twist drill 5, standard 2000 / Twist drill 5, long 2000 / huck key huck key Setting gauge 2000 / ircle cutter sets, Ø range ontents model 1 ircle-cutter model with cylindrical holder Ø 13, 1 cross-arm 50, 2 twist drills Ø 5, 6 blades 5A10 for thicknesses max. 10, setting gauge, hollow hexagon wrench 1 cross-arm 90 1 ircle-cutter model 2000-MK2 with holder MK2, 1 cross-arm 50, 2 twist drills Ø 5, 6blades 5A10 for thicknesses max. 10, setting gauge, hollow hexagon wrench 1 cross-arm MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-50

51 The T-A insert drilling system The most flexible drilling system in the world diameter range 9.5 to 114 depths up to 30 x Precise insert drilling system with new cutting inserts an be used for drilling depths of up to 30x (carbide inserts up to 8 x ) Novel AM200 coating and patented 'notch-point' geometry Improved stability and drilling straightness Excellent surface and reduced feed pressure iameter range from 9.5 to engths available from extra-short to 3X Impressive cutting speeds of over 150 m/min Excellent chip removal and low cutting pressure Base substrate made of HSS super cobalt or carbide metal 1 K35 Improved chip control thanks to curved cutting edge Bohren and boring Guaranteed application Use the request form (a master copy for photocopying is in the rear cover of the catalogue) to describe your machining problem to us. We will work with the manufacturer to present you with an offer to use suitable tools. Allied Maxcut provides the feasibility guarantee! Full range The most flexible drilling system in the world! You can find an informational cross-section of the drilling tools on offer on the following pages. In addition to the cutting quality grades specified here, other quality grades can also be supplied: Standard catalogue range: Additional quality grades in the general 'Allied Maxcut' catalogue: The general 'Allied Maxcut' catalogue also contains other diameter ranges and other coatings. 1-K35 carbide HSS super cobalt HSS premium cobalt 2-K20 carbide K10 carbide K20 carbide P40 carbide We will be glad to send you the general catalogue on request. Two TORX Plus screws make secure clamping easier Precision-ground recess For optimum insert seating New patented coating AM 200 for long service lives Fully-fledged helix-sanded side cutting edge For a better surface finish and improved chip control oncave main cutting edge Improves chip collection and removal Helix-sanded guide rail Reduces friction resistance and improves stability Protective chamfer on the exterior diameter for a longer tool service life Notch point geometry Improves stability, improves positioning precision and reduces cutting pressure The electronic product selector The electronic product selector was developed to demonstrate the versatility of the T-A drilling system. The use of the product selector provides you with not only the correct choice of holders, cutting inserts and possibly any accessories you may need, but also with the right cutting data for a certain application. The necessary drive power and specified machine and workpiece stability also flow into the cutting data recoendation. The product selector contains a selection of over 3,000 s. It can be used to fulfil around 90% of all drilling tasks. The software is available for download from our website: Preisangaben All Artikel prices mit in fettgedruckten euro, in Euro, VAT excluded zzgl Preisen MwSt. = agerware Artikel mit Prices fettgedruckten Preisangaben in bold print Preisen in = Euro, delivery = zzgl agerware ex MwSt. stock

52 Series Y T-A drilling system Internal coolant supply * Holders also have a 1/8 coolant supply connection on the side Series Y holder with straight shank hip space design Tool length linear fl uted Extra short 9,5-11, , , ,0 A1 B linear fl uted short 9,5-11, ,1 63,5 111, ,0 1/8 A1 B helically fl uted Standard 9,5-11, ,7 92,1 139, ,0 1/8 A1 B helically fl uted extra-long 9,5-11, ,5 142,9 190, ,0 1/8 A1 B linear fl uted X 9,5-11, ,7 254,1 301, ,0 1/8 A1 B linear fl uted 3X 9,5-11, ,9 322,3 369, ,0 1/8 A1 B Series Y holder with Morse taper shanks 1 4 Thread hip space design Tool length Series Z T-A drilling system Shank RA Thread linear fl uted short 9,5-11, , ,3 MK 2 2SRM 1/16 A1 B helically fl uted Standard 9,5-11, ,2 116,7 188,9 MK 2 2SRM 1/16 A1 B helically fl uted extra-long 9,5-11, ,9 167,4 239,7 MK 2 2SRM 1/16 A1 B Series Y cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 HM 1 K35 AM200 9, , , , , , Spare parts Screw TORX-Plus A B Internal coolant supply * Holders also have a 1/8 coolant supply connection on the side Series Z holders with straight shank hip space design Tool length linear fl uted Extra short 11,10-12,95 19,1 45, , ,0 1/16 * A1 B linear fl uted short 11,10-12,95 32,0 61,1 63,5 111, ,0 1/8 A1 B helically fl uted Standard 11,10-12,95 60,0 89,7 92,1 139, ,0 1/8 A1 B helically fl uted extra-long 11,10-12,95 111,0 140,5 142,9 190, ,0 1/8 A1 B linear fl uted X 11,10-12,95 222,3 251,7 254,1 301, ,0 1/8 A1 B linear fl uted 3X 11,10-12,95 290,5 319,9 322,3 369, ,0 1/8 A1 B Series Z holder with Morse taper shanks hip space design Tool length Thread Shank RA Thread linear fl uted short 11,10-12, , ,3 MK 2 2SRM 1/16 A1 B helically fl uted Standard 11,10-12, ,2 116,7 188,9 MK 2 2SRM 1/16 A1 B helically fl uted extra-long 11,10-12, ,9 167,4 239,7 MK 2 2SRM 1/16 A1 B Series Z cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 HM 1 K35 AM200 11, , , HSS Super Kobalt HM 1 K35 AM Spare parts Screw TORX-Plus A ,40 B < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

53 Series 0 T-A drilling system Internal coolant supply * Holders also have a 1/8 coolant supply connection on the side Series 0 holder with straight shank hip space design Tool length linear fl uted Extra short 12,98-17,65 22,0 47,6 50,4 97, ,0 1/8 * A1 B linear fl uted Extra short 15,50-17,65 22,0 47,6 50,4 97, ,0 1/8 A2 B linear fl uted short 12,98-17, ,5 66,3 113, ,0 1/8 A1 B linear fl uted short 15,50-17, ,5 66,3 113, ,0 1/8 A2 B helically fl uted Standard 12,98-17,65 64,0 92,1 94,9 142, ,0 1/8 A1 B helically fl uted Standard 15,50-17,65 64,0 92,1 94,9 142, ,0 1/8 A2 B helically fl uted extra-long 12,98-17,65 114,0 142,9 145,7 192, ,0 1/8 A1 B helically fl uted extra-long 15,50-17,65 114,0 142,9 145,7 192, ,0 1/8 A2 B helically fl uted Extremely long 12,98-17,65 177,0 206,4 209,1 256, ,0 1/8 A1 B helically fl uted Extremely long 15,50-17,65 177,0 206,4 209,1 256, ,0 1/8 A2 B linear fl uted X 12,98-17,65 295,0 323,9 326,7 373, ,0 1/8 A1 B linear fl uted 3X 12,98-17,65 387, ,8 466, ,0 1/8 A1 B Thread Series 0 holder with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 12,98-17, ,5 92,4 164,3 MK 2 2SRM 1/16 A1 B linear fl uted short 15,50-17, ,5 92,4 164,3 MK 2 2SRM 1/16 A2 B helically fl uted Standard 12,98-17, , ,9 MK 2 2SRM 1/16 A1 B helically fl uted Standard 15,50-17, , ,9 MK 2 2SRM 1/16 A2 B helically fl uted extra-long 12,98-17, ,8 243,7 MK 2 2SRM 1/16 A1 B helically fl uted extra-long 15,50-17, ,8 243,7 MK 2 2SRM 1/16 A2 B helically fl uted Extremely long 12,98-17, ,5 235,3 307,2 MK 2 2SRM 1/16 A1 B helically fl uted Extremely long 15,50-17, ,5 235,3 307,2 MK 2 2SRM 1/16 A2 B Series 0 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. HSS Super Kobalt S HM 1 K35 AM200 AM200 13, , , , , , , , , , Spare parts Screw TORX-Plus A B A < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset HSS Super Kobalt HM 1 K35 AM200 All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-53

54 Series 1 T-A drilling system Internal coolant supply * Holders also have a 1/8 coolant supply connection on the side Series 1 holder with straight shank hip space design Tool length linear fl uted Extra short 17,53-24, ,8 79,4 131, ,0 1/8 * A1 B linear fl uted Extra short 22,00-24, ,5 92,1 144, ,0 1/8 * A2 B linear fl uted short 17,53-24, ,2 110,7 163, ,0 1/8 A1 B linear fl uted short 22,00-24, ,2 110,7 163, ,0 1/8 A2 B helically fl uted Medium-length 17,53-24, ,8 158,4 210, ,0 1/8 A1 B helically fl uted Medium-length 22,00-24, ,8 158,4 210, ,0 1/8 A2 B helically fl uted Standard 17,53-24, ,6 209,2 261, ,0 1/8 A1 B helically fl uted Standard 22,00-24, ,6 209,2 261, ,0 1/8 A2 B helically fl uted extra-long 17,53-24, ,2 310,8 363, ,0 1/8 A1 B helically fl uted extra-long 22,00-24, ,2 310,8 363, ,0 1/8 A2 B linear fl uted X 17,53-24, ,5 498,1 225, ,0 1/8 A1 B linear fl uted 3X 17,53-24, ,5 606,1 658, ,0 1/8 A1 B Thread Series 1 holder with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 17,53-24, ,4 142,5 232,5 MK 3 3SRM 1/8 A1 B linear fl uted short 22,00-24, ,4 142,5 232,5 MK 3 3SRM 1/8 A2 B helically fl uted Medium-length 17,53-24, ,2 193,3 283,3 MK 3 3SRM 1/8 A1 B helically fl uted Medium-length 22,00-24, ,2 193,3 283,3 MK 3 3SRM 1/8 A2 B helically fl uted Standard 17,53-24, ,1 334,2 MK 3 3SRM 1/8 A1 B helically fl uted Standard 22,00-24, ,1 334,2 MK 3 3SRM 1/8 A2 B helically fl uted extra-long 17,53-24, ,6 345,7 435,8 MK 3 3SRM 1/8 A1 B helically fl uted extra-long 22,00-24, ,6 345,7 435,8 MK 3 3SRM 1/8 A2 B Series 1 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 HM 1 K35 AM200 18, , , , , , , , , , , , , Spare parts Screw TORX-Plus A B A < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset HSS Super Kobalt HM 1 K35 AM

55 Series 2 T-A drilling system Internal coolant supply * Holders also have a 1/8 coolant supply connection on the side Series 2 holder with straight shank hip space design Tool length linear fl uted Extra short 24,41-35, ,5 92,1 148, ,0 1/4 * A1 B linear fl uted Extra short 30,00-35, , , ,0 1/4 * A1 B linear fl uted short 24,41-35, ,6 132,2 188, ,0 1/4 A1 B linear fl uted short 30,00-35, ,6 132,2 188, ,0 1/4 A1 B helically fl uted Medium-length 24,41-35, , , ,0 1/4 A1 B helically fl uted Medium-length 30,00-35, , , ,0 1/4 A1 B helically fl uted Standard 24,41-35, ,2 233,8 290, ,0 1/4 A1 B helically fl uted Standard 30,00-35, ,2 233,8 290, ,0 1/4 A1 B helically fl uted extra-long 24,41-35, ,8 335,4 391, ,0 1/4 A1 B helically fl uted extra-long 30,00-35, ,8 335,4 391, ,0 1/4 A1 B linear fl uted X 24,41-35, ,1 557,7 614, ,0 1/4 A1 B linear fl uted 3X 24,41-35, ,1 738,7 795, ,0 1/4 A1 B Series 2 holder with Morse taper shank hip space design Tool length Thread Shank RA Thread linear fl uted short 24,41-35, ,3 160,4 273,8 MK 4 3SRM 1/8 A1 B linear fl uted short 30,00-35, ,3 167,6 281,0 MK 4 4SRM 1/4 A1 B helically fl uted Medium-length 24,41-35, ,1 211,2 324,6 MK 4 3SRM 1/8 A1 B helically fl uted Medium-length 30,00-35, ,1 218,4 331,8 MK 4 4SRM 1/4 A1 B helically fl uted Standard 24,41-35, , ,4 MK 4 3SRM 1/8 A1 B helically fl uted Standard 30,00-35, ,9 269,2 382,6 MK 4 4SRM 1/4 A1 B helically fl uted extra-long 24,41-35, ,5 363,6 477,0 MK 4 3SRM 1/8 A1 B helically fl uted extra-long 30,00-35, ,5 370,8 484,2 MK 4 4SRM 1/4 A1 B Series 2 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 HM 1 K35 AM200 24, , , , , , , , , , , , , , , , , , , , , , Spare parts Screw TORX-Plus A B < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset HSS Super Kobalt HM 1 K35 AM200 All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-55

56 Series 3 T-A drilling system Internal coolant supply * Holders also have a 1/4 coolant supply connection on the side Series 3 holder with straight shank hip space design Tool length linear fl uted Extra short 34,37-47,80 76, ,8 195, /4 * A1 B linear fl uted short 34,37-47,80 121, ,8 243, /4 A1 B helically fl uted Medium-length 34,37-47,80 165,0 217,5 222,3 287, /4 A1 B helically fl uted Standard 34,37-47,80 210,0 261,9 266,7 331, /4 A1 B linear fl uted extra-long 34,37-47,80 349,3 401,6 406,4 471, /4 A1 B linear fl uted X 34,37-47,80 558,8 611,1 615,9 681, /4 A1 B linear fl uted 3X 34,37-47,80 787,4 839,7 844,5 909, /4 A1 B Thread Series 3 holder with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 34,37-47, ,4 206,4 319,1 MK 4 4SRM 1/4 A1 B helically fl uted Medium-length 34,37-47, ,9 250,9 363,6 MK 4 4SRM 1/4 A1 B helically fl uted Standard 34,37-47, ,3 295,3 408 MK 4 4SRM 1/4 A1 B linear fl uted extra-long 34,37-47, MK 4 4SRM 1/4 A1 B linear fl uted X 34,37-47,80 558,8 590,6 644,6 757,2 MK 4 4SRM 1/4 A1 B linear fl uted 3X 34,37-47,80 787,4 819,2 873,2 985,8 MK 4 4SRM 1/4 A1 B Series 3 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 36, , , , , , , , , , , , Spare parts Screw TORX-Plus A B < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-56

57 Series 4 T-A drilling system Internal coolant supply Series 4 holder with straight shank hip space design Tool length linear fl uted short 46,99-65, ,4 184,2 249, /4 A1 B helically fl uted Standard 46,99-65, ,8 351, /4 A1 B linear fl uted extra-long 46,99-65, ,5 476,3 541, /4 A1 B linear fl uted X 46,99-65, ,7 679,5 744, /4 A1 B linear fl uted 3X 46,99-65, ,7 933,5 998, /4 A1 B Thread Series 4 holder with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 46,99-65, ,1 219,1 363,5 MK 5 5SRM 1/4 A1 B helically fl uted Standard 46,99-65, ,7 320,7 465,1 MK 5 5SRM 1/4 A1 B linear fl uted extra-long 46,99-65, ,2 655,6 MK 5 5SRM 1/4 A1 B linear fl uted X 46,99-65, ,4 714,4 858,8 MK 5 5SRM 1/4 A1 B linear fl uted 3X 46,99-65, ,4 968,4 1112,8 MK 5 5SRM 1/4 A1 B Series 4 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 48, , , , , , , , , , , , , , , , , , Spare parts Screw TORX-Plus A B < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-57

58 Series 5/6 and 7/8 T-A drilling system Internal coolant supply Holder series 5/6 with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 62,38-89, ,9 287,3 430,2 MK 5 6SRM 1/2 A1 B helically fl uted Standard 62,38-89, ,5 388,9 531,8 MK 5 6SRM 1/2 A1 B linear fl uted extra-long 62,38-89, ,4 722,3 MK 5 6SRM 1/2 A1 B linear fl uted X 62,38-89, ,8 776,2 919,1 MK 5 6SRM 1/2 A1 B linear fl uted 3X 62,38-89, ,4 1004,8 1147,7 MK 5 6SRM 1/2 A1 B Holder series 7/8 with Morse taper shank hip space design Tool length Shank RA Thread linear fl uted short 87,76-114, ,4 296,8 MK 5 6SRM 1/2 A1 B helically fl uted Standard 87,76-114, ,5 MK 5 6SRM 1/2 A1 B linear fl uted extra-long 87,76-114, MK 5 6SRM 1/2 A1 B linear fl uted X 87,76-114, ,7 811,2 MK 5 6SRM 1/2 A1 B linear fl uted 3X 87,76-114, ,7 1065,2 MK 5 6SRM 1/2 A1 B Series 5 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 64, , , , , , ,00 Series 6 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 78, , , , , ,00 Series 7 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM200 90, , , , , ,00 Series 8 cutting inserts Other quality grades and other diameters, some of which are in storage, are available on request. S HSS Super Kobalt AM , , , , , , , Spare parts 1142 Screw TORX-Plus A B < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-58

59 Accessories oolant adapter oolant ring, 2 O-ring seals, 2 retaining rings, 2 thrust washers Holding fi xtures 1 2 E RA esignation MK 2 19,05 44,45 22,23 M 8 1/8 2SRM MK ,97 28,57 M 8 1/8 3SRM MK 4 31, ,92 M10 1/4 4SRM MK 5 44, ,92 M10 1/4 5SRM MK 5 57,15 95,27 44,45 M12 1/2 6SRM ISO SK take-up with coolant supply IN 2080 oolant pressure max. 40 bar, speed max min-1, suitable for holders of series Y to 2 Shank design 2 2 esignation Interior Ø SK , SRM SK , SRM SK , SRM SK , SRM SK , ,27 6SRM oolant pipe extension / support rod RA esignation 1/ T-2SRM / T-3SRM / T-4SRM / T-5SRM / T-6SRM Support rod, solid 4 esignation M T-2SRM M T-3SRM M T-4SRM M T-5SRM M T-6SRM Quick coupling RA Hose connector Ø esignation 1/ T-2SRM / T-3SRM / T-4SRM / T-5SRM / T-6SRM All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-59

60 High-speed drilling system GEN3SYS Solid holders with internal coolant supply Holders 3x, 5x, 7x excellent chip control up to 20 % higher speeds High-precision centring of the drill bits in the holder for absolute repeatability Newly patented TiAlN-coating AM200 and AM300, for up to 25 % longer service lives High drilling accuracy, surface fi nish quality and concentricity Partially helix-sanded guide rail for maximum stability Universally applicable for the major part of the s Innovative new cutting edge geometry Holder 3x with straight shank hip space design lamping surface 6 12,00-12,99 linear fl uted 20 41,9 39 yes 68,6 66,6 108,5 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 39 yes 68,6 66,6 108,5 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 39 no 68,6 66,6 108,5 1/8 A1 B ,00-13,99 linear fl uted 20 41,9 42 yes 71,5 69,2 111,2 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 42 yes 71,5 69,2 111,2 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 42 no 71,5 69,2 111,2 1/8 A1 B ,00-14,99 linear fl uted 20 41,9 45 yes 75,0 72,4 114,3 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 45 yes 75,0 72,4 114,3 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 45 no 75,0 72,4 114,3 1/8 A1 B ,00-15,99 linear fl uted 20 41,9 48 yes 77,6 75,1 117,0 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 48 yes 77,6 75,1 117,0 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 48 no 77,6 75,1 117,0 1/8 A1 B ,00-16,99 linear fl uted 20 41,9 51 yes 84,2 81,3 123,2 1/8 A2 B ,00-16,99 helically fl uted 20 41,9 51 yes 84,2 81,3 123,2 1/8 A2 B ,00-16,99 helically fl uted 20 41,9 51 no 84,2 81,3 123,2 1/8 A2 B ,00-17,99 linear fl uted 20 41,9 54 yes 87,0 84,1 126,0 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 54 yes 87,0 84,1 126,0 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 54 no 87,0 84,1 126,0 1/8 A3 B ,00-19,99 linear fl uted 25 53,0 60 yes 96,8 94,0 147,1 1/8 A4 B ,00-19,99 helically fl uted 25 53,0 60 yes 96,8 94,0 147,1 1/8 A4 B ,00-19,99 linear fl uted 25 53,0 60 no 96,8 94,0 147,1 1/8 A4 B ,00-21,99 helically fl uted 25 53,0 66 yes 102,9 100,1 153,2 1/8 A4 B ,00-21,99 linear fl uted 25 53,0 66 no 102,9 100,1 153,2 1/8 A4 B ,00-23,99 helically fl uted 25 53,0 72 yes 108,3 105,3 158,4 1/8 A4 B ,00-23,99 linear fl uted 25 53,0 72 no 108,3 105,3 158,4 1/8 A4 B ,00-25,99 helically fl uted 25 53,0 78 yes 116,8 113,8 164,0 1/8 A5 B ,00-25,99 linear fl uted 25 53,0 78 no 116,8 113,8 164,0 1/8 A5 B ,00-28,99 helically fl uted 32 58,0 87 yes 130,9 128,1 186,0 1/8 A6 B ,00-28,99 linear fl uted 32 58,0 87 no 130,9 128,1 186,0 1/8 A6 B ,00-32,00 helically fl uted 32 58,0 96 yes 139,1 136,2 194,1 1/8 A6 B ,00-32,00 linear fl uted 32 58,0 96 no 139,1 136,2 194,1 1/8 A6 B Thread Holder 5x with straight shank hip space design lamping surface 6 12,00-12,99 linear fl uted 20 41,9 64,9 yes 94,8 134,5 92,6 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 64,9 yes 94,8 134,5 92,6 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 64,9 no 94,8 134,5 92,6 1/8 A1 B ,00-13,99 linear fl uted 20 41,9 70 yes 99,5 139,2 97,3 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 70 yes 99,5 139,2 97,3 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 70 no 99,5 139,2 97,3 1/8 A1 B ,00-14,99 linear fl uted 20 41,9 75 yes 104,9 144,3 102,4 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 75 yes 104,9 144,3 102,4 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 75 no 104,9 144,3 102,4 1/8 A1 B ,00-15,99 linear fl uted 20 41,9 80 yes 109,6 148,9 107,0 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 80 yes 109,6 148,9 107,0 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 80 no 109,6 148,9 107,0 1/8 A1 B ,00-16,99 linear fl uted 20 41,9 84,9 yes 118,2 157,2 115,3 1/8 A2 B ,00-16,99 helically fl uted 20 41,9 84,9 yes 118,2 157,2 115,3 1/8 A2 B All prices in euro, VAT excluded Prices in bold print = delivery ex stock 2 Thread

61 hip space design lamping surface 6 16,00-16,99 helically fl uted 20 41,9 84,9 no 118,2 157,2 115,3 1/8 A2 B ,00-17,99 linear fl uted 20 41,9 89,9 yes 122,9 162,0 120,0 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 89,9 yes 122,9 162,0 120,0 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 89,9 no 122,9 162,0 120,0 1/8 A3 B ,00-19,99 linear fl uted 25 53,0 99,9 yes 136,8 187,1 134,0 1/8 A4 B ,00-19,99 helically fl uted 25 53,0 99,9 yes 136,8 187,1 134,0 1/8 A4 B ,00-19,99 helically fl uted 25 53,0 99,9 no 136,8 187,1 134,0 1/8 A4 B ,00-21,99 linear fl uted 25 53,0 110 yes 146,9 197,2 144,1 1/8 A4 B ,00-21,99 helically fl uted 25 53,0 110 yes 146,9 197,2 144,1 1/8 A4 B ,00-21,99 helically fl uted 25 53,0 110 no 146,9 197,2 144,1 1/8 A4 B ,00-23,99 linear fl uted 25 53,0 120 yes 156,2 206,4 153,3 1/8 A4 B ,00-23,99 helically fl uted 25 53,0 120 yes 156,2 206,4 153,3 1/8 A4 B ,00-23,99 helically fl uted 25 53,0 120 no 156,2 206,4 153,3 1/8 A4 B ,00-25,99 linear fl uted 25 53,0 130 yes 168,7 216,0 165,8 1/8 A5 B ,00-25,99 helically fl uted 25 53,0 130 yes 168,7 216,0 165,8 1/8 A5 B ,00-25,99 helically fl uted 25 53,0 130 no 168,7 216,0 165,8 1/8 A5 B ,00-28,99 linear fl uted 32 58,0 145 yes 188,8 244,0 186,0 1/8 A6 B ,00-28,99 helically fl uted 32 58,0 145 yes 188,8 244,0 186,0 1/8 A6 B ,00-28,99 helically fl uted 32 58,0 145 no 188,8 244,0 186,0 1/8 A6 B ,00-32,00 linear fl uted 32 58,0 160 yes 203,1 258,0 200,1 1/8 A6 B ,00-32,00 helically fl uted 32 58,0 160 yes 203,1 258,0 200,1 1/8 A6 B ,00-32,00 helically fl uted 32 58,0 160 no 203,1 258,0 200,1 1/8 A6 B Thread Holder 7x with straight shank hip space design lamping surface 6 12,00-12,99 linear fl uted 20 41,9 90,9 yes 120,8 118,5 160,5 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 111,9 yes 141,6 139,0 180,9 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 90,9 yes 120,8 118,5 160,5 1/8 A1 B ,00-12,99 helically fl uted 20 41,9 90,9 no 120,8 118,5 160,5 1/8 A1 B ,00-13,99 linear fl uted 20 41,9 97,9 yes 127,5 125,3 167,2 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 97,9 yes 127,5 125,3 167,2 1/8 A1 B ,00-13,99 helically fl uted 20 41,9 97,9 no 127,5 125,3 167,2 1/8 A1 B ,00-14,99 linear fl uted 20 41,9 104,9 yes 134,9 132,4 190,5 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 104,9 yes 134,9 123,4 190,5 1/8 A1 B ,00-14,99 helically fl uted 20 41,9 104,9 no 134,9 123,4 190,5 1/8 A1 B ,00-15,99 linear fl uted 20 41,9 111,9 yes 141,6 139,0 180,9 1/8 A1 B ,00-15,99 helically fl uted 20 41,9 111,9 no 141,6 139,0 180,9 1/8 A1 B ,00-16,99 linear fl uted 20 41,9 118,9 yes 152,2 149,3 191,2 1/8 A2 B ,00-16,99 helically fl uted 20 41,9 118,9 yes 152,2 149,3 191,2 1/8 A2 B ,00-16,99 helically fl uted 20 41,9 118,9 no 152,2 149,3 191,2 1/8 A2 B ,00-17,99 linear fl uted 20 41,9 125,9 yes 158,9 156,0 197,9 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 125,9 yes 158,9 156,0 197,9 1/8 A3 B ,00-17,99 helically fl uted 20 41,9 125,9 no 158,9 156,0 197,9 1/8 A3 B ,00-19,99 linear fl uted 25 53,0 139,9 yes 176,8 174,0 227,1 1/8 A4 B ,00-19,99 helically fl uted 25 53,0 139,9 no 176,8 174,0 227,1 1/8 A4 B ,00-19,99 helically fl uted 25 53,0 139,9 yes 176,8 174,0 227,1 1/8 A4 B ,00-21,99 linear fl uted 25 53,0 153,9 yes 190,9 188,1 241,1 1/8 A4 B ,00-21,99 helically fl uted 25 53,0 153,9 yes 190,9 188,1 241,1 1/8 A4 B ,00-21,99 helically fl uted 25 53,0 153,9 no 190,9 188,1 241,1 1/8 A4 B ,00-23,99 linear fl uted 25 53,0 168,0 yes 204,2 201,3 254,4 1/8 A4 B ,00-23,99 helically fl uted 25 53,0 168,0 yes 204,2 201,3 254,4 1/8 A4 B ,00-23,99 helically fl uted 25 53,0 168,0 no 204,2 201,3 254,4 1/8 A4 B ,00-25,99 linear fl uted 25 53,0 182,0 yes 220,7 217,8 267,9 1/8 A5 B ,00-25,99 helically fl uted 25 53,0 182,0 yes 220,7 217,8 267,9 1/8 A5 B ,00-25,99 helically fl uted 25 53,0 182,0 no 220,7 217,8 267,9 1/8 A5 B ,00-28,99 linear fl uted 32 58,0 203,0 yes 246,8 244,0 302,0 1/8 A6 B ,00-28,99 helically fl uted 32 58,0 203,0 yes 246,8 244,0 302,0 1/8 A6 B ,00-28,99 helically fl uted 32 58,0 203,0-246,8 244,0 302,0 1/8 A6 B ,00-32,00 linear fl uted 32 58,0 224,0. 267,1 264,1 322,0 1/8 A6 B ,00-32,00 helically fl uted 32 58,0 224,0. 267,1 264,1 322,0 1/8 A6 B ,00-32,00 helically fl uted 32 58,0 224,0-267,1 264,1 322,0 1/8 A6 B All Prices prices in bold in euro, print VAT = delivery excluded ex stock 2 Thread Prices in All bold prices print = euro, delivery VAT excluded stock 10-61

62 arbide cutting inserts S K35 (1) AM200 K20 (2) AM200 K20 (I) AM200 K35 (AS) AM300 12, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Spare parts Screw TORX-Plus A B A B A B A B A A < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset K35 (1) AM200 K20 (2) AM200 K20 (I) AM200 K35 (AS) AM300 Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us All prices in euro, VAT excluded Prices in bold print = delivery ex stock

63 Solid drilling tools SARA-RI Machining of bore holes from 49 to 270 Ø on machines with low drive power low-vibration machining that is gentle to the machine with drive power that is reduced by up to 50 % in a single work step without centring and pre-drilling planing of the front face not required ost-effi cient boring system, since diff erences in diameter of up to 30 can be machined with one boring head by changing the cutting edges Variable drilling depths of up to 15 x due to holding fi xture system with pluggable extensions Internal coolant supply directly to the cutting edge, no high-pressure pump required for rotating tools, the coolant is supplied via a coolant ring Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores Also used on vertically operating machines ow tooling costs since wear only on the cutting edges and on the centre bit Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fi xture or the tool grinding machine utting : cutting edges ASP30, ASP30 TiN centre bit HSS Use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power aution: Not for boring already existing bores! Boring head esignation Working area A A B E F G H I Boring bar with Morse taper holding fi xture for boring head Shank design A1/A MK B MK MK MK E MK F MK G MK H MK I MK Extension 150 and 300 for boring head A1/A B E F G H I All Prices prices in bold in euro, print VAT = delivery excluded ex stock Prices in All bold prices print = euro, delivery VAT excluded stock 10-63

64 HM guide for use with extremely deep dill holes for boring head Working area B B / E-150 / F G-210 / H-240 / I entre bit for boring head Working area A1-55 to E-150 to I oolant ring ompl. with coupling, grip bar and circlip for boring head Working area Shank design A1-55 to MK to G MK H-240 to I MK Replacement shims for boring heads (prices per kit = 2 heads) for boring head A A B E F G H I High quality for great performance. ial indicators by ATORN: best manufacturing quality maximum precision long service life This is but one example of ATORN s high-quality measuring tools All prices in euro, VAT excluded Prices in bold print = delivery ex stock

65 utting edge SARA- RI for SARA-RI solid drilling tools The cutting edges are delivered in pairs, i.e. 1 roughing blade and 1 fi nishing blade. Note for machining blind holes: for machining intermediate sizes, the fi nishing blade can be adjusted in the range of from 3 to 10, depending on the size of the boring head.(not permissible for machining through-holes!) aution: The cutting edges may only be replaced in pairs, otherwise risk of breakage! Prices per pair (1 roughing blade and 1 fi nishing blade) 1 = Finishing blade 2 = entre bit 3 = Roughing blade for boring head ASP 30 ASP 30 TiN-coated 49 A A A A A A A1-55,A A A A A A A A A A A2-65,B B B B B B B B B B B B B B B B- 80, Grinding fixture for cutting edges for boring head Working area A E-150-I for boring head ASP 30 ASP 30 TiN-coated , E E E E E E E F F F F F F-180,G G G G-210,H H H H-240,I I I I ASP 30 ASP 30 TiN-coated < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All Prices prices in bold in euro, print VAT = delivery excluded ex stock Prices in All bold prices print = euro, delivery VAT excluded stock 10-65

66 Solid drill bits for ISO indexable cutting inserts Tool holder made of high-strength hardened and tempered tool steel (surface nitrided) two clamping surfaces staggered by 180 on the shank or VI 30 and VI 40 holding fi xtures Formal insert seat in the Ø range of from ISO-indexable inserts in the Ø range of optimum chip space geometry (scaled) Broad application range due to available tool lengths of 2 x, 3 x and 4 x better utilization of the length of your N lathe since there is no tool holder (with VI direct tool holder) extensive fi eld of application and cost saving due to the use of ISO indexable cutting inserts more eff ective chip removal elivery of special sizes within 4 weeks with additional charge Progressive dies with max. two gradings (chamfers etc.) possible Reduction of the machining times due to higher cutting speeds Reduction of the auxiliary processing times due to simple and fast replacement of cutting element ow-cost carrier Saving of tooling costs due to ISO indexable insert and simultaneous increase in productivity with internal coolant supply Very large adjusting range with tool holding fixture no Solid drill bits 2 x, straight shank suitable indexable inserts Number of index. inserts 15, PMT A , PMT A , PMT A , MT A , MT A3 B , MT A3 B , MT A3 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B , MT 09T3.. 4 A5 B Solid cartridge drills available on request! of different diameters by using different outer cartridges! All prices in euro, VAT excluded Prices in bold print = delivery ex stock 1

67 Solid drill bits 3 x, straight shank suitable indexable inserts Number of index. inserts 14, PGT A , PMT A , PMT A , PMT A , PMT A , MT A3 B , MT A3 B , MT A3 B , MT A3 B , MT A3 B , MT A3 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT A4 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT 09T3.. 2 A5 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT A6 B , MT09T3.. 4 A5 B , MT09T3.. 4 A5 B , MT09T3.. 4 A5 B Solid drill bits 4 x, straight shank suitable indexable inserts Number of index. inserts PMT A PMT A PMT A MT A3 B MT A3 B MT A3 B MT A4 B MT A4 B MT A4 B MT A4 B MT A4 B MT A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A4 B MT 09T3.. 2 A6 B MT 09T3.. 2 A6 B MT A6 B MT A6 B MT A6 B MT A6 B All Prices prices in bold in euro, print VAT = delivery excluded ex stock Prices in All bold prices print = euro, delivery VAT excluded stock

68 Solid drill bit 2 x, VI suitable indexable inserts Number of index. inserts MT A6 B MT A6 B MT A6 B MT A6 B MT A6 B MT09T3.. 4 A5 B MT09T3.. 4 A5 B MT09T3.. 4 A5 B Solid drill bit 3 x, VI suitable indexable inserts Number of index. inserts MT A5 B MT A5 B MT A5 B MT A5 B MT A5 B MT A5 B MT 09T3.. 4 A5 B MT 09T3.. 4 A5 B MT 09T3.. 4 A5 B MT 09T3.. 4 A5 B Indexable inserts ISO range: P30-40 M30-40 K ISO ISO designation EN 300 PGT 04T104-A PMT A MT A MT B MT MT A MT B MT MT 09T308-A MT 09T308-B MT 09T MT A MT B Spare parts Screw Grub screws Keys A B A B A A A A MT..-A MT..-B MT All prices in euro, VAT excluded Prices in bold print = delivery ex stock

69 and turning tool SARA-UT and turning with one tool into solid matter with a level base of the drill hole (drawing 1) Turning of internal contours (drawing 2) Turning of fl at contours (drawing 3) Turning of external contours (drawing 4)) (Note change of turning direction) Reduced stock-keeping of tools and indexable inserts Reduced prograing eff ort and expense Reduced tooling times Problem solver in the case of missing mould plates Reduction of the tooling costs with internal coolant supply, including spare screw for closing the front, head-end coolant bore Indexable inserts including one clamping screw x Right , A1 B , A2 B A3 B A4 B eft 2,5 x Right , A1 B , A2 B A3 B A4 B eft Indexable inserts ISO range: P30-40 M30-40 K30-40 Type ISO suitable for MX MB MX MB MX 09T308-MB MX MB Spare parts Screw Keys A B A B A B A MT..-B High quality for great performance. Swivel bases by ATORN: high-quality s longest service life several different chip geometries This is but one example of ATORN s high-quality turning tools. All Prices prices in bold in euro, print VAT = delivery excluded ex stock Prices in All bold prices print = euro, delivery VAT excluded stock 10-69

70 High quality for great performance. ATORN s taps: highest cutting speeds precision-ground for safest machining ISO colour codes for easy identifi cation of the correct tool This is but one example of ATORN s high-quality drilling tools.

71 Overview of threading taps and forming taps Hand tap metric thread from page metric fine thread page Whitworth page UN thread page UNF thread from page Bohren Machine threading taps and forming taps metric thread from page metric fine thread page Whitworth pipe thread from page UN thread page UNF thread from page NPT thread page Panzergewinde thread page The tap range With a new database-oriented system of tool design in the research disciplines of high-speed steel, heat treatment, surface treatment and hard coatings, the ATORN tap range meets the higher demands of the key industries of engineering and machine construction, automotive, fittings and screw joints, medical technology and aerospace. The following properties are of particular interest in the new ATORN tap range: The technology used in manufacturing the ATORN tap range ifferent high-alloy high-speed steels, PM steels and newly developed carbide types as a base substrate. Optimised heat and surface treatment and cutting edge formation for process safety in use. The latest developments in hard substance coating for the relevant field of use. Tool/geometry combinations (up to 138 specific characteristics) for each tap version available 'online' from a production database and ensuring the high standard of the product. Strict tolerances in tool production and increased SP expense with 'tool quality management'. The use of state-of-the-art precision machinery and equipment in tool production to ensure 100% reproducibility of the versatile tool design in the ATORN range. The advantages of using the ATORN tap range iversity in products to cover all noteworthy requirements in metalworking. Faster machining speeds, in part thanks to new cutting s, tool geometries and coating technologies. Increased service life thanks to the optimum combination of cutting, heat and surface treatment, geometric data and coating technology. Reduction in retooling times. Increasing the range of uses of the relevant tool group. The use of the ATORN tap range therefore increases process safety for every user in production, reduces tool costs and optimising the workpiece cutting results. This means that this tool development sets new standards both technical and coercial. The ISO colour ring system for threading taps and forming taps ATORN taps are colour-coded with rings using the ISO coding system based on their main field of use. The relevant secondary uses are specified in the catalogue. steels up to 1000 N/ 2 stainless steels GG, GGG aluminium and copper alloys, long-chipping s titanium and nickel alloys hard steels up to 62 HRc steels up to 1400 N/ 2 steels stainless steels Preisangaben All Artikel prices mit in fettgedruckten euro, in Euro, VAT excluded zzgl Preisen MwSt. = agerware Artikel mit Prices fettgedruckten Preisangaben in bold print Preisen in = Euro, delivery = zzgl agerware ex MwSt. stock 10-71

72 Hand tap metric ISO thread IN 13 utting HSS and HSS-E for through-hole threads and blind-hole threads 3-part Kit, consisting of taper tap, second tap and bottom tap (VS, MS and FS) Taper tap Form A Second tap Form Bottom tap Form Taper tap, second tap and bottom tap, individual part Kit SARA HSS 3-part ATORN set HSS ATORN HSS VS ATORN HSS MS ATORN HSS FS M 1 0, ,5 2,5 2, M 1.2 0, ,5 2,5 2, M 1.4 0, ,5 2, M 1.6 0, ,5 2, M 1.7 0, ,5 2, M 1.8 0, ,5 2, M 2 0, ,8 2, M 2.2 0, ,8 2, M 2.3 0, ,8 2, M 2,5 0, ,8 2, M 2.6 0, ,8 2, M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 4.5 0, ,5 3, M 5 0, , M , M , M 8 1, , M 9 1, , M 10 1, , M 11 1, , M 12 1, M M M 18 2, M 20 2, M 22 2, , M , M M 30 3, M 33 3, M M M 42 4, M 45 4, M M HSS-E ATORN HSS-E VS ATORN HSS-E MS ATORN HSS-E FS M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, , M 12 1, M M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset ATORN HSS-E VS 3-part Kit SARA HSS 3-part ATORN set HSS 10-72

73 Hand tap, left-handed thread Metric ISO left-handed thread IN 13 3-part Kit, consisting of taper tap, second tap and bottom tap utting HSS for through-hole threads and blind-hole threads 1 1 M 4 0, ,5 3, Taper tap Form A Second tap M 5 0, , Form Bottom tap Form M , M 8 1, , M 10 1, , M 12 1, M M M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset M-H Hand tap metric ISO thread IN 13 utting HSS-E vaporized, HSS-E nitrified, HSS-PM nitrided for through-hole threads and blind-hole threads 3-part Kit, consisting of taper tap, second tap and bottom tap (VS, MS and FS) up to M12 taper tap with pilot pin Taper tap Form A Second tap Form Bottom tap Form Taper tap, second tap and bottom tap, individual 1 1 Set SARA HSS-E, vaporised ATORN set HSS-E, nitrided M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, , M 12 1, M M VS MS FS 1 1 ATORN set HSS-PM, nitrided M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset ATORN set HSS-PM, Set SARA HSS-E, ATORN set HSS-E, nitrided VS MS FS All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-73

74 Hand tap metric ISO 6H fine thread IN 13 2-part Kit, consisting of taper tap and bottom tap utting HSS for through-hole threads and blind-hole threads Individual taps are available on request Taper tap Form Bottom tap Form 1 1 SARA ATORN M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 5 0, , M 6 0, , M 6 0, , M 7 0, , M , M 8 0, , M 8 0, , M , M 10 1, , M , M 10 0, , M , M 12 1, M 12 1, M M 12 0, M 14 1, M 14 1, M M 15 1, M M 16 1, M 16 1, M M 18 1, M M 20 1, M M 22 1, , M , M , M 24 1, , M , M 25 1, , M 26 1, , M M 27 1, M M 28 1, M M 30 1, M 32 1, M M M 36 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset SARA ATORN 10-74

75 Hand tap UN UN (unified national coarse) 3-part Kit, consisting of taper tap, second tap and bottom tap utting HSS for through-hole threads and blind-hole threads Taper tap Form A Second tap Form Size UN Gang/Zoll , ,8 2, Bottom tap Form , ,5 2, , ,5 2, , ,0 3, , ,5 3, , ,0 4, / , ,0 4, / , ,0 4, / , ,0 5, / , ,0 6, / , ,0 7, / , ,0 9, / , ,0 11, / , ,0 14, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Hand tap UNF UNF thread (unified national fine thread) 2-part Kit, consisting of taper tap and bottom tap utting HSS for through-hole threads and blind-hole threads Taper tap Form Bottom tap Form Size UNF Gang/Zoll , ,5 2, , ,0 3, , ,5 3, , ,0 4, , ,0 4, / , ,0 4, / , ,0 4, / , ,0 5, / , ,0 6, / , ,0 7, / , ,0 9, / , ,0 9, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset a forza necessita di qualità. I maschiatori ATORN: massima velocità di taglio rettifica di precisione per la massima sicurezza nel processo codifica con anelli colorati a norma ISO per una semplice identificazione Un esempio di qualità degli utensili di perforazione ATORN. All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-75

76 Hand tap BSW Withworth IN 11 3-part Kit, consisting of taper tap, second tap and bottom tap utting HSS for through-hole threads and blind-hole threads Individual taps are available on request Note: For Whitworth threads in accordance with BSI standard BS 84 in medium tolerance fi eld. Taper tap Form A Second tap Form Bottom tap Form Gang/Zoll 1 1 SARA ATORN W 3/ ,8 2, W 1/ ,5 2, W 5/ ,5 3, W 3/ ,5 4, W 7/ , W 1/ , W 5/ , W 3/ , W 7/ , W 1/ W 9/ W 5/ W 3/ W 7/ , W < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset SARA ATORN Hand tap G British Standard Withworth, IN part Kit, consisting of taper tap and bottom tap utting HSS for through-hole threads and blind-hole threads Individual taps are available on request Note: For cylindrical pipe threads IN-ISO 228/1 Taper tap Form Bottom tap Form Gang/Zoll 1 1 SARA ATORN G 1/ , G 1/ G 3/ G 1/ G 5/ , G 3/ G 7/ G G 1 1/ G 1 1/ G 1 3/ G 1 1/ G 1 3/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset SARA ATORN 10-76

77 Machine tap, short model NEW NUOVO NY metric ISO 6H thread linear fluted, with spiral point, Form B, thread chamfer IN 352 utting HSS-E for through-hole threads The spiral point ensures chip removal to the front possible depth of thread 3 x N O U VEAU N UEVO 1 1 M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, ,0 4, M 6 1, ,0 4, M 8 1, ,0 4, M 10 1, ,0 5, M 12 2, ,0 7, M 16 2, ,0 9, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-77

78 Machine tap metric ISO 6H thread, right and left linear fl uted, with spiral point, Form B, thread chamfer IN 371 = to M 10, IN 376 = from M12 utting HSS-E, HSS-E TiN, HSS-E TiN for through-hole threads the spiral point ensures strong chip removal to the front possible depth of thread 3 x Right 1 1 TiN-coated TiN oated M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 5 0, , M 6 1, , M 7 1, , M 8 1, , M 10 1, M 12 1, M 14 2, M 16 2, M 18 2, M 20 2, M 22 2, , M 24 3, , M 27 3, M 30 3, eft 1 1 M 4-H 0, ,5 3, M 5-H 0, , M 6-H 1, , M 8-H 1, , M 10-H 1, M 12-H 1, M 14-H 2, M 16-H 2, M 20-H 2, right, long design (company standard) 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 14 2, , M 16 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-78

79 Machine tap POT metric ISO 6H thread linear fl uted, with spiral point Type, 2-3 thread chamfer for through-hole threads utting HSS-E V3 on request also available with TiN-coating IN Tapping hole Ø IN 371 M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3,0 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, IN Tapping hole Ø IN 376 M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 1, ,5 3,4 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 10, M 14 2, ,0 9,0 12, M 16 2, ,0 9,0 14, M 18 2, ,0 11,0 15, M 20 2, ,0 12,0 17, M 22 2, ,0 14,5 19, M 24 3, ,0 14,5 21, M 27 3, ,0 16,0 24, M 30 3, ,0 18,0 26, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap Extra long, metric ISO 6H thread inear fl uted, with extra-long shank approx. 20 thread chamfer utting HSS-E for through-hole threads possible depth of thread 3 x 1 1 M 3 0, , M 4 0, ,8 2, M 5 0, ,5 2, M ,5 3, M 8 1, ,0 4, M 10 1, ,0 5, M 12 1, ,0 7, M ,0 9, M 20 2, ,0 12, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-79

80 Machine tap metric ISO 6H thread linear fl uted, with spiral point, Form B, thread chamfer IN 371 = up to M10, IN 376 = from M12 utting HSS-E for through-hole threads with enlarged chip space the spiral point ensures strong chip removal to the front Possible depths of thread 3 x Aluminium 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, ,0 4, M 6 1, ,0 4, M 8 1, ,0 6, M 10 1, ,0 8, M 12 1, ,0 7, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread linear fl uted with spiral point, Form B, thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E, vaporised, HSS-E TiN-coated for through-hole threads possible depth of thread 3 x INOX 1 1 vaporized TiN-coated M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, , M 12 1, , M 16 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-80

81 Machine tap VA-POT metric ISO 6H thread and ISO 6G thread linear fl uted, with spiral point Form B, 4 thread chamfer for through-hole threads utting HSS-E V3 vaporised ISO-6H; IN Tapping hole Ø ISO-6H M 2 0, ,8 2,1 1, M 2.2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, ISO-6G; IN Tapping hole Ø ISO-6G M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, ISO-6H; IN Tapping hole Ø ISO-6H IN 376 M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 1, ,5 3,4 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 10, M 14 2, ,0 9,0 12, M 16 2, ,0 9,0 14, M 18 2, ,0 11,0 15, M 20 2, ,0 12,0 17, M 22 2, ,0 14,5 19, M 24 3, ,0 14,5 21, M 27 3, ,0 16,0 24, M 30 3, ,0 18,0 26, M 36 4, ,0 22,0 32, ISO-6G; IN Tapping hole Ø ISO-6G IN 376 M 12 1, ,0 7,0 10, M 14 2, ,0 9,0 12, M 16 2, ,0 9,0 14, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-81

82 Machine tap metric ISO 6H thread linear fl uted with spiral point, Form B, thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E, HSS-E TiN-coated for through-hole threads possible depth of thread 3 x up to 1400 N/² 1 1 TiN oated M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, , M 12 1, , M 16 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Universal machine tap NEW NUOVO NY metric ISO 6H thread linear fluted with spiral point Type B, thread chamfer onstructional dimensions IN 371 = up to M 10, IN 376 = from M12 utting HSS-E TiN-coated, HSS-E PM TiN-coated for through-hole threads possible depth of thread 3 x Suitable for conventional and N machining using synchronised tap chucks N O U VEAU N UEVO 1 1 HSS-E TiN-coated HSS-PM-TiN-coated M 2 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, , M 12 1, , M 14 2, , M 16 2, , M 18 2, , M 20 2, , M 24 3, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-82

83 Machine tap metric ISO 6H thread linear fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM TiN-coated for through-hole threads possible depth of thread 3 x Optimally suited for steel and INOX 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap Z-POT metric ISO 6H thread linear fl uted, with spiral point Form B, 4 thread chamfer for through-hole threads Version with coolant bores available on request utting PM powder coating (o5 + V5) TiN-coated (V) IN Tapping hole Ø IN 371 M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, IN Tapping hole Ø M 12 1, , M 14 2, , M 16 2, , M 18 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-83

84 Machine tap Metric ISO 6HX thread linear fl uted, with spiral point, Type, 2 thread chamfer IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM- TiN- coated for through-hole threads the spiral point ensures strong chip removal to the front Possible depths of thread 2 x Titan and superalloys 1 1 M 2 0, ,8 2, M 3 0, ,5 2, M 3.5 0, , M 4 0, ,5 3, M 5 0, ,0 4, M 6 1, ,0 4, M 8 1, ,0 6, M 10 1, ,0 8, M 12 1, ,0 7, M 16 2, ,0 9, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread linear fl uted, with exposed thread ridges Type B, thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E for through-hole threads, in s that tend to jam Thin-walled parts and pipes, possible depth of thread 3 x 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread inear fl uted, form, 2-3 thread chamfer utting HSS-E For blind-hole and through-hole threads possible depth of thread 1.5 x 1 1 M 4 0,7 63 7,5 2,8 2, M 5 0,8 70 8,5 3,5 2, M ,5 3, M 8 1, , M 10 1, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-84

85 Machine tap metric ISO 6H thread linear fl uted Type, 2-3 thread chamfer IN 371 = up to M10, IN 376 = from M12 utting HSS-E For blind-hole and through-hole threads, possible depth of thread 1.5 x 1 1 M 2 0,4 45 4,5 2,8 2, M 2,5 0, ,0 2,8 2, M 3 0,5 56 6,0 3,5 2, M 4 0,7 63 7,5 4,5 3, M 5 0,8 70 8,5 6 4, M 6 1, , M 8 1, , M 10 1, M 12 1, , M 14 2, M 16 2, M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap V-XPM-HT metric ISO 6H thread linear fl uted, with spiral point Type, 2.5 thread chamfer For blind-hole and through-hole threads utting XPM powder coating (o10 + V5) TiN-coated (V) 1 1 Tapping hole Ø M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 10, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide machine tap metric ISO 6H thread Type, thread chamfer, for blind-hole and through-hole threads Similar to IN 371, possible depth of thread 1.5 x utting solid carbide, superfine grain TiN-coated Hard machining 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset TiN All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-85

86 Machine tap Metric ISO 6HX thread linear fl uted Type, 2-3 thread chamfer IN 371 = up to M10, IN 376 = from M12 utting HSS-E, nitrided For blind-hole and through-hole threads, possible depth of thread 3 x ast iron 1 1 nitrified M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, M 18 2, M 20 2, M 24 3, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide machine tap VX-OT metric ISO 6H thread linear fl uted, with spiral point Type, 2.5 thread chamfer For blind-hole and through-hole threads utting, solid carbide, superfine grain TiN-coated (V) Tapping hole Ø M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 10, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap, short model NEW NUOVO NY metric ISO 6H thread Form, 2-3 thread chamfer, for blind-hole threads IN 352 utting HSS-E possible depth of thread 2.5 x N O U VEAU N UEVO 1 1 M 3 0, ,5 2, M 4 0,7 45 7,5 3,4 3, M 5 0,8 50 8,5 4,9 4, M 6 1, ,9 4, M 8 1, ,9 4, M 10 1, ,5 5, M 12 1, ,5 7,0 7, M 16 2, ,0 9, M 20 2, ,0 12, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-86

87 Machine tap NEW NUOVO NY Metric ISO-6 H thread Form, thread chamfer IN 371 = up to M10, IN 376 = from M12 utting HSS-E for through-hole threads suitable for use with multiple spindles possible depth of thread 3 x N O U VEAU N UEVO 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, , M 12 1, , M 14 2, , M 16 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread Form, 2-3 thread chamfer, for blind-hole threads IN 371 = up to M10, IN 376 = from M12 utting HSS-E, HSS-E TiN, HSS-E TiN suitable for use with multiple spindles possible depth of thread 2.5 x 1 1 TiN-coated TiN oated M 2 0, ,8 2, M 2.3 0, ,8 2, M 2,5 0, ,8 2, M 2.6 0, ,8 2, M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 5 0, , M 6 1, , M 7 1, , M 8 1, , M 10 1, M 12 1, M 14 2, M 16 2, M 18 2, M 20 2, M 24 3, , M 30 3, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-87

88 Machine tap metric ISO 6H thread Form, 2-3 thread chamfer, 15, helically fl uted IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM for blind-hole threads, easy chip removal to the rear possible depth of thread 2.5 x Titan and superalloys 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, , M 12 1, , M 16 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. Short chucks by ATORN: high-strength s perfect concentricity accuracy large clamping range high clamping force This is but one example of ATORN s high-quality clamping tools

89 Machine tap metric ISO 6H thread, right and left 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E, HSS-E TiN, HSS-E TiN for blind-hole threads strong chip removal to the rear for long-chipping s minimum thread-relief grinding possible depth of thread 2.5 x Right 1 1 TiN-coated TiN oated M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, M 12 1, M M M 18 2, M 20 2, M , M 30 3, eft 1 1 M 3-H 0, ,5 2, M 4-H 0, ,5 3, M 5-H 0, , M 6-H , M 8-H 1, , M 10-H 1, M 12-H 1, M 16-H M 20-H 2, right, long design (company standard) 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, M 12 1, M M M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-89

90 Machine tap SFT metric ISO 6H thread 40 helically fl uted, with spiral point Type, 2.5 thread chamfer for blind-hole threads utting HSS-E V3 on request also available with TIN-coating IN Tapping hole Ø IN 371 M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3,0 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, IN Tapping hole Ø IN 376 M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 1, ,5 3,4 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 10, M 14 2, ,0 9,0 12, M 16 2, ,0 9,0 14, M 18 2, ,0 11,0 15, M 20 2, ,0 12,0 17, M 22 2, ,0 14,5 21, M 24 3, ,0 14,5 21, M 27 3, ,0 16,0 24, M 30 3, ,0 18,0 26, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap NEW NUOVO NY metric ISO 6H thread Form, 2 3 thread chamfer, 15, helically fl uted with exposed ridges IN 371 = up to M10, IN 376 = from M12 utting HSS-E for blind-hole threads, easy chip removal to the rear possible depth of thread 2 x N O U VEAU N UEVO 1 1 M 3 0,5 56 6,0 3,5 2, M 4 0,7 63 7,5 4,5 3, M 5 0,8 70 8,5 6 4, M 6 1, ,0 6 4, M 8 1, ,0 8 6, M 10 1, ,0 10 8, M 12 1, ,5 9 7, M 16 2, ,0 12 9, M 20 2, , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-90

91 Machine tap SUS-SFT metric ISO 6H thread 40 helically fl uted, with spiral point Type, 2.5 thread chamfer for blind-hole threads ue to its special cutting edge geometry, this tap produces very small, controlled chips, which ensures optimum chip removal. utting HSS-E V3 vaporised ISO-6H; IN Tapping hole Ø M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M10 1, ,0 8,0 8, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap -SFT Metric ISO 6HX thread for s that are difficult to machine ontrollable chips for better thread surfaces low machining temperature improved service life for blind-hole threads up to 3 x 45 helically fl uted Type, 2.5 thread chamfer Material: HSS-E V3, rn-coated Tap for UN, UNF and British Standard Withworth threads available on request hips from the -SFT hips from a conventional tap ISO-6HX; IN Tapping hole Ø IN 371 M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, ISO-6HX; IN Tapping hole Ø IN 376 M 12 1, , M 14 2, M 16 2, M 18 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-91

92 Machine tap metric ISO 6H thread Form, 2-3 thread chamfer, 45, helically fl uted IN 371 = up to M10, IN 376 = from M12 utting HSS-E for blind-hole threads, with enlarged chip space, possible depth of thread 2.5 x 1 1 Aluminium M 2 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, M 12 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap A-SFT metric ISO 6H thread 45 helically fl uted, with spiral point Type, 2.5 thread chamfer, for blind-hole threads utting HSS-E V3 Aluminium 1 1 Tapping hole Ø M 1.6 0, ,5 2,1 1, M 2 0, ,8 2,1 1, M 2.2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3,0 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread 45 helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM TiN-coated for deep blind-hole thread easy chip removal to the rear, possible depth of thread 3 x Optimally suited for steel and INOX 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-92

93 Machine tap metric ISO 6H thread 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E vaporised, HSS-E TiN-coated For blind-hole threads, minimum thread relief grinding possible depth of thread 2.5 x INOX 1 1 vaporized TiN-coated M 2 0, ,8 2, M 2,5 0, ,8 2, M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap Z-SFT metric ISO 6H thread 50 helically fl uted, with spiral point Type, 2.5 thread chamfer for blind-hole threads Version with coolant bores available on request utting PM powder coating (o5 + V5) TiN-coated (V) IN Tapping hole Ø IN 371 M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, IN Tapping hole Ø IN 376 M 12 1, , M 14 2, , M 16 2, , M 18 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-93

94 Machine tap VA-SFT metric ISO 6H thread and ISO 6G thread 40 helically fl uted, with spiral point Type, 2.5 thread chamfer for blind-hole threads utting HSS-E V3 vaporised ISO-6H; IN Tapping hole Ø M 2 0, ,8 2,1 1, M 2.2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3,0 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8,0 8, ISO-6G; IN Tapping hole Ø M 2 0, ,8 2,1 1, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 6, M 10 1, ,0 8 8, ISO-6H; IN Tapping hole Ø M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 1, ,5 3,4 5, M 8 1, ,0 4,9 6, M 10 1, ,0 5,5 8, M 12 1, ,0 7 10, M 14 2, ,0 9 12, M 16 2, ,0 9 14, M 18 2, , , M 20 2, ,0 12,0 17, M 22 2, ,0 14,5 19, M 24 3, ,0 14,5 21, M 27 3, ,0 16,0 24, M 30 3, ,0 18,0 26, M 33 3, , , M 36 4, , , ISO-6G; IN Tapping hole Ø M 12 1, , M 14 2, , M 16 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 10-94

95 Machine tap up to 1400 N/² metric ISO 6H thread 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E, HSS-E TiN-coated for blind-hole threads possible depth of thread 2.5 x 1 1 uncoated TiN oated M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, M 16 2, M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H thread 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM for blind-hole threads Shortened threaded part, larger relief grindings, narrow cutting inserts possible depth of thread 2.5 x 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, M 12 1, M M M 20 2, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. ATORN s taps: highest cutting speeds precision-ground for safest machining ISO colour codes for easy identification of the correct tool All prices in euro, VAT excluded This is but one example of ATORN s high-quality drilling tools. Prices in bold print = delivery ex stock 10-95

96 Synchronised machine tap NEW NUOVO NY Metric ISO 6HX thread 50, helically fluted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM, PM powder coating TiN-coated for blind-hole threads possible depth of thread 2.5 x Minimum-sized guide piece and extremely large clearance angle Shank tolerance = h6 for synchronised tap chuck N O U VEAU N UEVO 1 TiN-coated M 4 0,7 63 3, M 5 0,8 70 4, M 6 1,0 80 5, M 8 1, , M 10 1, , M 12 1, , M 14 2, , M 16 2, , M 20 2, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Universal machine tap NEW NUOVO NY metric ISO 6H thread 40 helically fluted ( HSS-E ), 50 helically fluted ( HSS-E-PM ) Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E TiN, HSS-E PM TiAlN for blind-hole threads minimum thread-relief grinding possible depth of thread 2.5 x Suitable for N machining centres using synchronised chucks N O U VEAU N UEVO 1 1 HSS-E TiN HSS-E PM TiN oated M 3 0, ,5 2, M 4 0,7 63 7,5 4,5 3, M 5 0,8 70 8,5 6 4, M 6 1, , M 8 1, , M 10 1, M 12 1, , M 14 2, M 16 2, M 18 2, M 20 2, M 24 3, , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Starting on page Safety goggles Starting on page Breathing protection apparatus Starting on page

97 Machine tap NEW NUOVO NY metric ISO 6H thread 40, helically fl uted Form E, thread chamfer onstructional dimensions IN 371 utting HSS-E for blind-hole threads, possible depth of thread 2.5 x N O U VEAU N UEVO 1 1 M 3 0, ,5 2, M 4 0,7 63 7,5 4,5 3, M 5 0,8 70 8,5 6,0 4, M 6 1, ,0 4, M 8 1, ,0 6, M 10 1, ,0 8, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tapping set in plastic box HSS-E tap for metric ISO-6H threads, right-hand 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to M10, IN 376 = from M12 for blind-hole threads strong chip removal to the rear for long-chipping s minimum thread-relief grinding, possible depth of thread 2.5 x HSS/o twist drill type GS 130 point angle ontents Tap no M3, M4, M5, M6, M8, M10, M12 Twist drill no Ø < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine forming tap Metric ISO 6HX thread Type, 2-3 thread chamfer with oil grooves onstructional dimensions IN 2174 utting HSS-E TiN, HSS-E TiAlN coated For blind-hole and through-hole threads for s with good cold-forming properties and a min. expansion of 8 % possible depth of thread 3 x 1 1 TiN-coated TiAIN oated M 3 0, ,5 2, M 3.5 0, M 4 0, ,5 3, M 5 0, , M , M 8 1, , M 10 1, M 12 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-97

98 Machine forming tap Metric ISO 6HX thread Type, 2-3 thread chamfer, with oil grooves onstructional dimensions IN 371 = up to M10, IN 376 = from M12 utting HSS-E-PM TiN-coated For blind-hole and through-hole threads For steel, hardened and tempered steels and chemically stable steels, possible depth of thread 2 x Optimally suited for steel and INOX 1 1 M 3 0, ,5 2, M 4 0, ,5 3, M 5 0, , M 6 1, , M 8 1, , M 10 1, M 12 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide machine forming tap NEW NUOVO NY Metric ISO 6HX thread Type, 2-3 thread chamfer, with oil grooves onstructional dimensions IN 2174, Shank tolerance h6 utting solid carbide, superfine grain TiAlN coated For blind-hole and through-hole threads, possible depth of thread 3 x for s with good cold-forming properties and a min. expansion of 8 % with internal coolant supply Suitable for seating in shrink fit holders: Shank 1 = h6 N O U VEAU N UEVO 1 1 M 3 0, , M 4 0, , M 5 0, , M , M 8 1, , M 10 1, M 12 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine forming tap NEW NUOVO NY Metric ISO 6HX thread Type, 2-3 thread chamfer without oil grooves onstructional dimensions IN 2174 utting HSS-E TiN For blind-hole and through-hole threads, Expandable thread depth 1 x for s with good cold-forming properties and min 8 % 1 1 N O U VEAU M 2 0,4 45 8,0 2,8 2, M 2,5 0, ,0 2,8 2, M 3 0, ,0 3,5 2, M 3.5 0, ,0 4 3, M 4 0, ,0 4,5 3, M 5 0, ,0 6 4, M 6 1, ,0 6 4, M 8 1, ,0 8 6, M 10 1, ,0 10 8, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset N UEVO

99 Machine forming tap V-NRT-B Metric ISO 6HX thread with spiral point, Form, 2 thread chamfer for blind-hole threads utting HSS-E o8 TiN-coated 1 1 Tapping hole Ø M 2 0, ,8 2,1 1, M 2.2 0, ,8 2,1 2, M 2,5 0, ,8 2,1 2, M 3 0, ,5 2,7 2, M 3.5 0, ,0 3,0 3, M 4 0, ,5 3,4 3, M 5 0, ,0 4,9 4, M 6 1, ,0 4,9 5, M 8 1, ,0 6,2 7, M 10 1, ,0 8,0 9, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap NEW NUOVO NY metric ISO 6H fine thread linear fl uted, with spiral point, Form B, thread chamfer utting HSS-E, HSS-E TiN-coated for through-hole threads the spiral point ensures strong chip removal to the front possible depth of thread 3 x N O U VEAU N UEVO 1 1 TiN-coated M 3 0, , M 4 0, ,8 2, M 5 0, ,5 2, M 6 0, ,5 3, M 6 0, ,5 3, M 7 0, ,5 4, M 8 0, , M 8 0, , M , M , M 10 0, , M , M 10 1, , M , M M 12 1, M 12 1, M M 14 1, M 14 1, M M 15 1, M M 16 1, TiN-coated M M 18 1, M M M 20 1, M M , M 22 1, , M , M , M 24 1, , M , M 26 1, , M 27 1, M M 30 1, M M 32 1, M 33 1, M 35 1, M 36 1, M 38 1, M 40 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock 10-99

100 Machine tap NEW NUOVO NY metric ISO 6H fine thread linear fl uted Type, 2-3 thread chamfer utting HSS-E For blind-hole and through-hole threads possible depth of thread 1.5 x N O U VEAU N UEVO 1 1 M 3 0, ,2 2, M 4 0, ,8 2, M 5 0, ,5 2, M 6 0, ,5 3, M 6 0, ,5 3, M 8 0, , M 8 0, , M , M , M 10 0, , M , M 10 1, , M M 12 1, M 12 1, M M 14 1, M 14 1, M M M 16 1, M M 18 1, M M M 22 1, , M , M 24 1, , M , M 26 1, , M 27 1, M M 30 1, M M 36 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap VA-POT metric ISO 6H fine thread inear fl uted, with spiral point, Form B, 4 thread chamfer for through-hole threads utting HSS-E V3 vaporised 1 1 Tapping hole Ø M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 0, ,5 3,4 5, M 6 0, ,5 3,4 5, M 8 0, ,0 4,9 7, M 8 1, ,0 4,9 7, M 10 1, ,0 5,5 9, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 11, M 12 1, ,0 7,0 10, M 14 1, ,0 9,0 12, M 16 1, ,0 9,0 14, M 18 1, ,0 11,0 16, M 20 1, ,0 12,0 18, M 22 1, ,0 14,5 20, M 24 1, ,0 14,5 22, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

101 Machine tap metric ISO 6H fine thread 15, RH, helically fl uted Type, 2-3 thread chamfer utting HSS-E, vaporised for blind-hole threads easy chip removal to the rear suitable for use with multiple spindles possible depth of thread 1.5 x 1 1 M 5 0, ,5 2, M 6 0, ,5 3, M 8 0, ,0 4, M ,0 4, M ,0 5, M 10 1, ,0 5, M ,0 7, M 12 1, ,0 7, M 12 1, ,0 7, M ,0 9, M 14 1, ,0 9, M ,0 9, M 16 1, ,0 9, M 18 1, ,0 11, M 20 1, ,0 12, M 22 1, ,0 14, M 24 1, ,0 14, M ,0 14, M 26 1, ,0 14, M 27 1, ,0 16, M ,0 16, M 28 1, ,0 16, M 30 1, ,0 18, M ,0 18, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap metric ISO 6H fine thread 40, helically fl uted Type, 2-3 thread chamfer utting HSS-E, vaporised, HSS-E TiN-coated for blind-hole threads strong chip removal to the rear minimum thread-relief grinding possible depth of thread 3 x 1 1 TiN-coated M 6 0, ,5 3, M , M , M 10 1, , M 12 1, M 12 1, M 14 1, M 16 1, M 18 1, M 20 1, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

102 Machine tap VA-SFT metric ISO 6H fine thread 40 helically fl uted, with spiral point, Form, 2.5 thread chamfer, for blind-hole threads utting HSS-E V3 vaporised 1 1 Tapping hole Ø M 3 0, ,2-2, M 4 0, ,8 2,1 3, M 5 0, ,5 2,7 4, M 6 0, ,5 3,4 5, M 6 0, ,5 3,4 5, M 8 0, ,0 4,9 7, M 8 1, ,0 4,9 7, M 10 1, ,0 5,5 9, M 10 1, ,0 5,5 8, M 12 1, ,0 7,0 11, M 12 1, ,0 7,0 10, M 14 1, ,0 9,0 12, M 16 1, ,0 9,0 14, M 18 1, ,0 11,0 16, M 20 1, ,0 12,0 18, M 22 1, ,0 14,5 20, M 24 1, ,0 14,5 22, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap British Standard Withworth, 55 linear fl uted, Type, 2-3 thread chamfer utting HSS-E For blind-hole and through-hole threads, possible depth of thread 3 x Suitable for N machining centres with synchronised chucks for higher quantities Note: For cylindrical pipe threads IN-ISO 228/1 Gang/Zoll 1 1 G 1/ , G 1/ G 3/ G 1/ G 3/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap British Standard Withworth, 55 linear fl uted, with spiral point, Reduced shank, form, 2-3 thread chamfer utting HSS-E for through-hole threads, possible depth of thread 1.5 x Suitable for conventional machining using quick-action drill chuck Note: For cylindrical pipe threads IN-ISO 228/1 Gang/Zoll 1 1 G 1/ , G 1/ G 3/ G 1/ G 3/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

103 Machine tap British Standard Withworth, 55 15, RH, helically fl uted Type, 2-3 thread chamfer utting HSS-E for blind-hole threads easy chip removal to the rear suitable for use with multiple spindles, possible depth of thread 3 x Suitable for conventional machining using quick-action drill chuck Note: For cylindrical pipe threads IN-ISO 228/1 Gang/Zoll 1 1 G 1/ , G 1/ G 3/ G 1/ G 3/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap British Standard Withworth, 55 40, helically fl uted Type, 2-3 thread chamfer utting HSS-E, vaporised for blind-hole threads strong chip removal to the rear for long-chipping s minimum thread-relief grinding possible depth of thread 3 x Suitable for conventional machining using quick-action drill chuck Note: For cylindrical pipe threads IN-ISO 228/1 Gang/Zoll 1 1 G 1/ , G 1/ G 3/ G 1/ G 3/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap VA-SFT British Standard Withworth, 55, ISO helically fl uted, with spiral point Type, 2.5 thread chamfer, for blind-hole threads utting HSS-E V3 vaporised 1 1 Tapping hole Ø G 1/ ,5 8, G 1/ ,0 11, G 3/ ,0 15, G 1/ ,0 19, G 5/ ,5 21, G 3/ ,0 24, G 7/ ,0 28, G ,0 31, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

104 Machine tap UN, unified national coarse Type B, thread chamfer onstructional dimensions IN 371 = up to 3/8, IN 376 = from 7/16 utting HSS-E, vaporised for through-hole threads Suitable for conventional machining using quick-action drill chuck, possible depth of thread 3 x Gang/Zoll 1 1 1/ , / , / / , / / / / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap UN, unified national coarse 40, helically fl uted, Type, 2-3 thread chamfer onstructional dimensions IN 371 = up to 3/8, IN 376 = from 7/16 utting HSS-E, vaporised for blind-hole threads, Suitable for conventional machining using quick-action drill chuck possible depth of thread 3 x Gang/Zoll 1 1 1/ , / , / / , / / / / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap UNF thread, unified national fine thread linear fl uted, with spiral point Tolerance: 2B Type B, thread chamfer onstructional dimensions IN 374 utting HSS-E, vaporised for through-hole threads Suitable for conventional machining using quick-action drill chuck, possible depth of thread 3 x Gang/Zoll 1 1 1/ ,5 3, / , / , / , / / / / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

105 Machine tap UNF thread, unified national fine thread 40, helically fl uted Type, 2-3 thread chamfer onstructional dimensions IN 374 utting HSS-E, vaporised for blind-hole threads possible depth of thread 2.5 x Gang/Zoll 1 1 1/ ,5 3, / , / , / , / / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap American conical pipe thread NPT-60 linear fl uted Type, 2-3 thread chamfer utting HSS-E For blind-hole and through-hole threads conical, sealing pitch 1:16 possible depth of thread 1.5 x Gang/Zoll 1 1 NPT 1/ , NPT 1/ , NPT 1/ NPT 3/ NPT 1/ NPT 3/ NPT 1 11, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine tap NEW NUOVO NY PG Reinforced straight pipe thread 80 linear fl uted Type B, thread chamfer utting HSS-E for through-hole threads possible depth of thread 3 x N O U VEAU N UEVO Gang/Zoll 1 1 PG PG PG PG PG , PG PG < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

106 Solid carbide drill for broken-off tap rill bit for broken-off tap in bolt hole for drilling stellites and heat-treated steels (58 68 HRc) Straight shank with hexagon utting solid carbide 1 1 2, , , , , , , , , , , , , , part kit ontents Each 1 solid carbide reamer Ø < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. ATORN s taps: highest cutting speeds precision-ground for safest machining ISO colour codes for easy identification of the correct tool This is but one example of ATORN s high-quality drilling tools

107 Thread repair kits ontents: for each coil thread: 1 drill 1 coil tap 1 hand installer 1 stud breaker thread inserts Individual taps are available on request Single repair kits for coil thread Kit compilations Twist drill Ø Number of inserts M 3 x 0.5 3, M 4 x 0.7 4, M 5 x 0.8 5, M 6 x 1.0 6, M 8 x , M 10 x , M 12 x , for coil thread Twist drill Ø Number of inserts M 5 x 0.8 / M 6 x 1.0 / M 8 x 1.25 / M 10 x 1.5 / M 12 x ,2 / 6,3 / 8,3 / 10,4 / 12,4 25 except M 12x1.75 = M 6 x 1.0 / M 8 x 1.25 / M 10 x 1.5 6,3 / 8,3 / 10, Thread inserts 1.5 x Standard type, passing through freely of stainless steel IN 8140, tolerance ISO 2 (6H) for coil thread M 3 x M 4 x M 5 x M 6 x M 8 x M 10 x M 12 x Application Repair of damaged or worn thread. Thread reinforcement of s with low shear strength, for example aluminium and magnesium alloys, in mechanical engineering, in automotive, electrical and medical engineering, and in aviation and astronautics. 1 1 rill Use a twist drill to ream the damaged thread. 2 heck heck that the taps and threaded bolts have the same thread and pitch. 2 3 Thread Use a special coil tap to cut the supporting thread into the drilled hole. The use of cutting fluid is recoended. 3 4 Fit thread insert Place the insert on the tool and ensure that the tang is seated in the groove opening. Adjust to the correct position using the adjusting ring. Apply light pressure to rotate the thread set to the thread position. o not turn against the direction of movement, or the tang may break off. 5 Breaking the tang Once fitted, take out the rotation tool and remove the tang using the tang breaker All prices in euro, VAT excluded Prices in bold print = delivery ex stock

108 Threading die for metric ISO threads IN 13 closed, pre-slotted shape from M3 with two-sided spiral point for clean and easy chip removal in cutting direction Tolerance fi eld 6g utting HSS, HSS-E (lapped, from M3 nitrifi ed) Right-handed thread 1 H N HSS HSS-E M 2 0, M 2,5 0, M 2.6 0, M 3 0, M 3.5 0, M 4 0, M 4.5 0, M 5 0, M 6 1, M 7 1, M 8 1, M 9 1, M 10 1, M 11 1, M 12 1, M 14 2, M 16 2, M 18 2, M 20 2, M 22 2, M 24 3, M 27 3, M 30 3, M 33 3, M 36 4, eft-handed thread 1 M 10 1, M 12 1, M 14 2, M 16 2, M 20 2, M 3 0, M 4 0, M 5 0, M 6 1, M 8 1, H N HSS 7-part kit for metric ISO threads IN 13 in steel plate cartridge utting HSS-E ontents HSS-E Each 1 threading die M < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset HSS HSS-E

109 Threading die for metric ISO fine threads IN 13 closed, pre-slotted shape from M3 with two-sided spiral point for clean and easy chip removal in cutting direction Tolerance fi eld 6g, M2 is 6h and without spiral point utting HSS, HSS-E (lapped) * without spiral point Right-handed thread 1 H N HSS HSS-E M 2* 0, M 3 0, M 4 0, M 5 0, M 6 0, M 6 0, M 7 0, M 8 0, M 8 0, M 8 1, M 9 1, M 10 0, M 10 1, M 10 1, M 11 1, M 12 1, M 12 1, M 12 1, M 14 1, M 14 1, M 14 1, M 15 1, M 16 1, M 16 1, M 18 1, M 18 1, H N HSS HSS-E M 20 1, M 20 1, M 20 2, M 22 1, M 22 1, M 22 2, M 24 1, M 24 1, M 24 2, M 25 1, M 26 1, M 27 2, M 28 1, M 30 1, M 30 2, M 32 1, M 33 2, M 34 1, M 35 1, M 36 1, M 36 2, M 36 3, M 40 1, M 42 1, M 45 1, M 50 1, eft-handed thread 1 H N M 8-H 0, M 8-H 1, M 10-H 1, M 12-H 1, HSS 1 H N M 14-H 1, M 16-H 1, M 20-H 1, HSS HSS HSS-E < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

110 Threading die for Whitworth threads BS 84 or British Standard Withworth IN/EN/ISO 228/Part 1 closed, pre-slotted shape from 1/8 with two-sided spiral point for clean and easy chip removal in cutting direction utting HSS Whitworth thread BS 84, tolerance field medium Gang/Zoll 1 BSW 1/ BSW 5/ BSW 7/ BSW 1/ BSW 5/ BSW 3/ BSW 1/ BSW 5/ Whitworth pipe thread, IN/EN/ISO 228/part 1 in tolerance field A Gang/Zoll 1 H H N N G 1/ G 1/ G 3/ G 1/ G 3/ G G 11/ G < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Threading die for UNF (unified national fine) threads closed, pre-slotted shape from no. 5 with two-sided spiral point for clean and easy chip removal in cutting direction utting HSS Note: For cutting true-to-gauge threads within the 2A tolerance fi eld * without spiral point 1 H Gang/Zoll N UNF no. 4* UNF no UNF no UNF no UNF no UNF 1/ UNF 5/ UNF 3/ UNF 7/ UNF 1/ UNF 9/ UNF 5/ < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

111 Thread cutting tool set in steel plate cartridge ontents: 1 set of hand taps IN 352, M , set with 3 taps each 1 threading die IN 223/EN each, M adjustable tap wrench size each 1 threading die holder IN 225 each: 20x5, 20x7, 25x9, 30x11, 38x14 1 tapping hole drill bit Ø 2.5; 3.3; 4.2; 5.0; 6.8; 8.5; 10.2 each 1 tool holder with ratchet size 1 + pitch gauge + screwdriver utting HSS ontents M3 - M < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Thread cutting tool set in steel plate cartridge ontents: Each: 1 set of hand taps IN 352, M , set with 3 taps 1 threading die IN 223/EN 22568, M adjustable tap wrench sizes threading die holder: 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14, 45 x 18 1 tool holder with ratchet sizes 1 + 3, pitch gauge + screwdriver utting HSS ontents M3 - M < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Hand tap set for metric threads M3-M12 with adjustable tap wrench and tool holder in plastic box utting HSS ontents Each 1 set of hand taps IN 352, M , 1 tap wrench size 1 1/2, 1 tool holder size < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

112 Single operation tapping set for metric threads M3-M12 Single operation taps (chamfer form B with spiral point) tapping hole twist drill Tap wrench and tool holder in plastic box utting HSS-E ontents Each 1 single operation tap IN 352: M , 1 tap wrench IN 1814 size 11/2 adjustable, 1 tool holder size 1, each 1 twist drill IN 338 profi le-ground: < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Extension for hand taps adjustable Two-jaw chuck with square holding fi xture No. 1 = appropriate for M3-M10 No. 2 = appropriate for M5-M12 No. for quadratic for tap M for tap Ww , ,4-3,8-4,3-4,9-5,5 M 3 - M 10 1/8-3/ ,9-5,5-6,2-7 M 5 - M 12 3/16-1/ Extension for hand taps For extending taps and other tools with square end according to IN 10 galvanized for quadratic for tap M 3 2,1 1-2, , , ,0 3, , , , ,9 4, , , , , for quadratic for tap M 3 9, , , , , , , , , , , Tool holder with ratchet Two-jaw chuck with square holding fi xture All-steel design, chrome-plated especially suited for threading at points diffi cult to access long design (0250 und 0300) long design for quadratic for tap M 85 2,0-5,0 M 3 - M ,0-5,0 M 3 - M ,5-8,0 M 5 - M ,5-8,0 M 5 - M

113 Extensions for machine taps Threading in workpieces with extremely deep internal threads or for threading directly along cast walls, edges, interfering edges of equipment etc. The front end of the extension is designed as a collet. Tightening a knurled clamping nut clamps the collet / the tap. The torque is transferred via the square end. The rear end of the extension complies with IN so that the tap extensions can be clamped in quick-change inserts just like taps or other thread-cutting equipment. Special dimensions available on request for being used on N machines and traditional threading attachment no cost-intensive taps with special lengths spare parts not required the combination of extension and standard tap is precise and easy to handle an be supplied upon request with shank tolerance h6 for hydraulic expansion and shrink fi t holder Standard version and design with internal coolant supply Type 1 for quadratic TE1 / TE1IK 2,8 2, ,9 6, TE1 2,8 2, ,9 6, TE2 / TE2IK 3,5 2, ,9 7, TE2 3,5 2, ,9 7, TE3 / TE3IK 4,5 3, ,9 8, TE3 4,5 3, ,9 8, TE4 / TE4IK 6,0 4, ,5 12, TE4 / TE4IK 6,0 4, ,5 12, TE5 / TE5IK 7,0 5, ,5 12, TE5 / TE5IK 7,0 5, ,5 12, TE6 / TE6IK 8,0 6, , TE6 / TE6IK 8,0 6, , TE7 / TE7IK 9,0 7, , TE7 / TE7IK 9,0 7, , TE8 / TE8IK 10,0 8, , TE8 / TE8IK 10,0 8, , TE9 / TE9IK 11,0 9, , TE9 / TE9IK 11,0 9, , TE10 / TE10IK 12,0 9, , TE10 / TE10IK 12,0 9, , TE11 / TE11IK 14,0 11, ,0 22, TE11 / TE11IK 14,0 11, ,0 22, TE12 / TE12IK 16,0 12, ,0 22, TE12 / TE12IK 16,0 12, ,0 22, TE13 / TE13IK 18,0 14, ,5 26, TE13 / TE13IK 18,0 14, ,5 26, IK High quality for great performance. igital slide callipers by ATORN: high-quality s maximum precision quick and reliable measuring results waterproof and with best resilience This is but one example of ATORN s high-quality measuring tools. All prices in euro, VAT excluded Prices in bold print = delivery ex stock

114 Tap wrench, adjustable Housing no. 0-5 high-purity zinc die casting Z410 Housing no. 6 made of steel ST37, welded structure Jaws case-hardened and phosphatised Steel grips galvanized, one handle can be screwed off For accoodation of hand taps IN 352 and hand reamers IN 206 via square end No. for quadratic 0 2,0-5, ,0-6, /2 2,0-8, ,0-9, ,9-12, ,5-16, ,0-20, ,0-25, Mini-tap wrench, adjustable Hardened steel jaws For small threads ight and handy For delicate and exact work for quadratic for tap M for tap Ww 40 max. 2.4 M 1 - M 2.6 1/16-3/ Threading die holder Housing Ø high-purity zinc die casting Z410 Housing from Ø 75 made of steel ST37, welded structure lamping screws phosphated Steel grips galvanized, from Ø 45, handles can be screwed off For holding threading dies IN 223/EN H suitable for threading die 16 5 M M 3; M M M M M M 22; M 22; 25 (fi ne) M 27; 30; 33; M 39; M 45; 48;

115 eburring countersink 60 3 cutting edges utting HSS, HSS TiN-coated Straight shank IN HSS TiN-coated 6,3 1, , ,0 2, ,5 3, , , ,0 6, Morse taper shank IN Shank design 25,0 6,3 MK ,5 10,0 MK ,0 12,5 MK ,0 16,0 MK ,0 20,0 MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide deburring countersink 60 3 cutting edges, relief-ground radially Shank tolerance h9 Straight shank utting solid carbide Version: Ø 8 in solid carbide, Ø10 - Ø25 solid carbide head, shank soldered We recoend the carbide version for machining solid steels. Smooth countersinks ong service life 5 1 8,0 2,0 6, ,0 2,5 8, ,5 3,2 8, ,0 4,0 10, ,0 5,0 10, ,0 6,3 10, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset eburring countersink 75 3 cutting edges, straight shank Form utting HSS eburring countersinks also available with morse taper shank and other countersink angles on request! 8,0 2, ,0 2, ,5 2, ,0 3, ,0 3, ,0 3, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

116 eburring countersink 90 ENORMplus utting HSS/o Application: especially for s diffi cult to machine such as Hardox 400, reusabro, Inconel, Nimonic, Hastelloy, Monel, titanium and titanium alloys Straight shank ,4 4,0 6, ,4 4,0 8, ,5 4,5 10, ,5 5,0 10, ,0 5,5 10, ,0 6,0 12, Z Morse taper shank 5 Shank design Z 31,0 6,0 MK ,0 10,0 MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset eburring countersink 90 With cross-hole and straight shank hip removal due to slant drill hole in shank direction, light spiral point utting HSS-E, HSS-E TiN-coated 5-part kit for Ø 1 uncoated TiN-coated ontents HSS-E TiN-coated : 10 / 14 / 21 / / 28 + paste long design for Ø extra-long design for Ø < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

117 eburring countersink 90 3 cutting edges Relief-ground radially utting HSS, HSS-E, HSS TiN, HSS TiAlN For countersinking and deburring ountersunk Ø match the respective countersunk IN screw heads (IN 963, 964, 965, 966, 7991) min. HSS HSS TiN-coated HSS TiAlN-coated HSS-E 4,3 1, ,0 1, ,3 1, ,8 1, ,0 1, ,3 1, ,0 1, ,3 1, ,0 2, ,3 2, ,4 2, ,0 2, ,4 2, ,5 2, ,4 2, ,4 2, ,0 3, ,5 3, ,0 3, ,5 3, ,0 3, ,0 3, ,0 4, ,0 4, ,0 4, ,0 10, Kits ontents HSS HSS TiN-coated HSS TiAlN-coated HSS-E Each 1 piece 6.3 / 8.3 / 10.4 / 12.4 / 16.5 / Each 1 piece 10.4 / 16.5 / 20.5 / Each 1 piece 8.0 / 10.0 / 11.5 / extra-long shank, similar to IN = shank length iameters 40, 50 and 63 available on request = = = 250 6,3 1, ,3 2, ,4 2, ,4 2, ,0 3, ,5 3, ,5 3, ,0 3, ,0 4, Kits, extra long shank, similar to IN 335 ontents HSS 4 = 100 HSS 4 = 150 Each 1 piece 6.3 / 8.3 / 10.4 / 12.4 / 16.5 / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

118 Solid carbide deburring countersink 90 3 cutting edges, relief-ground radially Shank tolerance h9 utting solid carbide Version: Ø in solid carbide, Ø10 31 solid carbide head, shank soldered ountersunk Ø match the respective countersunk IN screw heads (IN 963, 964, 965, 966, 7991) 5 1 6,0 2,0 5, ,3 2,0 5, ,0 2,0 6, ,3 2,0 6, ,0 2,5 8, ,4 2,5 8, ,5 2,8 8, ,4 2,8 8, ,0 3,2 10, ,5 3,2 10, ,5 3,5 10, ,0 3,8 10, ,0 4,2 12, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset eburring countersink 90 3 cutting edges Morse taper shank utting HSS hatter-free countersinking and deburring 5 Shank design 20,5 3,5 MK ,0 3,8 MK ,0 4,0 MK ,0 4,2 MK ,0 4,2 MK ,0 4,5 MK Shank design 37,0 4,8 MK ,0 10,0 MK ,0 14,0 MK ,0 16,0 MK ,0 22,0 MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset eburring countersink 90 with one cutting edge, large chip chamber, form A axial-radial cone-shaped shell relief grinding Straight shank, from Ø 15 with off set shank utting HSS-E superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

119 ombination counterbore Only 3 holder sizes cover a counterbore range of from 7-66 (on request up to 84 ). ountersink and pilot pin can be combined as desired within one holder size. Tight tolerances of bores and shanks ensure a high degree of true running accuracy. ountersink and pin are moved fast and securely with only one screw. An additional stud safety catch prevents that the countersinks are twisted. The manufacture of countersinks for IN screws as well as for the manufacture of stepped bores or counter bores outside the standard are possible by combination 4 cutting edges ombination counterbore holder model 1 Shank design ountersink area 3 8 Hole H7 0 10x , MK , MK , x , MK , MK , MK , MK , ounterbore model 0 ounterbore range utting edge length 19 Shank Ø 10 7, , , , , , , , , , , , , , , , , , , , ounterbore model 1 ounterbore range utting edge length 22 Shank Ø 14 14, , , , , , , , , , , , , , , , , , , , , , , , , , , , ounterbore model 2 ounterbore range utting edge length 27 Shank Ø 22 24, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , All prices in euro, VAT excluded Prices in bold print = delivery ex stock

120 Pilot pin, hardened and ground, model 0 Pilot pin, attached Overall length 59 Shank Ø 4 4, , , , , , , , , , , , , , , , Pilot pin, hardened and ground, model 1 Pilot pin, attached Overall length 79 Shank Ø 6 7, , , , , , , , , , , , , , , , , , , , , , , Pilot pin, hardened and ground, model 2 Pilot pin, attached (*= rotating pilot pin) Overall length 105 Shank Ø 10 11, , , , , , , , , , , , , , , , , , , , , , , ,0* ,0* ,0* ,0* ombination counterbore sets model ontents, piloted counterbore ontents, pilot pin Holder OP M4-M8 8,0 / 9,0 / 10,0 / 11,0 / 12,0 / 13,0 / 14,0 / 15,0 4,5 / 5,0 / 5,5 / 6,0 / 6,5 / 6,6 / 7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 10,0 Model 0 MK OP M8-M14 14,0 / 15,0 / 16,0 / 18,0 / 20,0 / 22,0 / 24,0 8,0 / 8,5 / 9,5 / 10,0 / 10,5 / 11,0 / 11,5 / 12,0 / 12,5 / 13,0 / 13,5 / 14,0 / 14,5 / 15,0 / 15,5 / 16,0 Model 1 MK OP M14-M24 24,0 / 26,0 / 28,0 / 30,0 / 32,0 / 33,0 / 34,0 / 36,0 / 40,0 13,0 / 14,0 / 15,0 / 16,0 / 17,0 / 18,0 / 19,0 / 20,0 / 23,0 / 24,0 / 25,0 / 26,0 Model 2 MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

121 ounterbore 3 cutting edges helically fl uted with straight shank fast pilot pin for counterbores according to IN 74, sheet 2, form H,J,K, for screws according to IN 912, IN 6912, IN 6984 and IN 84 utting HSS, HSS-E with pin for through-holes, grade fine 6 for screws 1 HSS Fine grade HSS-E Fine grade 6,5 3,2 M3 5, ,0 4,3 M4 5, ,0 5,3 M5 8, ,0 6,4 M6 8, ,0 8,4 M8 12, ,0 10,5 M10 12, ,0 13,0 M12 12, with pin for through-holes, grade medium 6 for screws 1 HSS Medium grade HSS-E Medium grade 6,5 3,4 M3 5, ,0 4,5 M4 5, ,0 5,5 M5 8, ,0 6,6 M6 8, ,0 9,0 M8 12, ,0 11,0 M10 12, ,0 13,5 M12 12, with pin for tapping holes 6 for screws 1 HSS HSS-E 6,5 2,5 M3 5, ,0 3,3 M4 5, ,0 4,2 M5 8, ,0 5,0 M6 8, ,0 6,8 M8 12, ,0 8,5 M10 12, ,0 10,2 M12 12, Kits ontents: 1 unit each ounterbore for screws M3-M10 = 6-part escription HSS HSS-E Through-hole, fi ne grade Through-hole, medium grade Tapping hole < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Hand-held deburring tool 90 Right hand cutting 12, , , , All prices in euro, VAT excluded Prices in bold print = delivery ex stock

122 rill hole deburring tool S-edge rill hole deburring on both sides in one go Spindle stop not required eburring at inaccessible places, e.g. hollow parts Economisation of a second clamping Simple and stable construction especially suited for series production Suited for any machine and almost any workpiece Very short machining times Other dimensions and TiN-coated designs available on request utting HSS 1 1,0-1,1 0, ,1-1,2 1, ,2-1,3 1, ,3-1,4 1, ,4-1,5 1, ,5-1,6 1, ,6-1,7 1, ,7-1,8 1, ,8-1,9 1, ,9-2,0 1, ,0-2,2 1, ,2-2,4 2, ,4-2,6 2, ,6-2,8 2, ,8-3,18 2,75 101, ,17-3,55 3,15 101, ,55-3,96 3,58 101, ,96-4,36 3,94 101, ,36-4,74 4,34 101, ,74-5,15 4,72 101, ,15-5,56 5,13 101, ,56-5,94 5,54 101, ,94-6,35 5,92 101, ,35-6,75 6,32 101, ,75-7,13 6,73 101, ,13-7,54 7,11 101, ,54-7,95 7,52 101, ,95-8,33 7,92 101, ,33-8,71 8,31 101, ,71-9,11 8,69 101, ,11-9,52 9,09 101, ,52-9,90 9,50 112, ,90-10,31 9,88 112, ,31-10,72 10,29 112, ,71-11,13 10,67 112, ,10-11,51 11,07 139, ,51-11,91 11,48 139, ,89-12,29 11,86 139, ,29-12,70 12,27 139, ,70-13,11 12,67 177, ,08-13,49 13,05 177, ,49-13,89 13,46 177, ,89-14,30 13,84 177, ,30-14,68 14,27 190, ,68-15,09 14,65 190, ,09-15,47 15,06 190, ,47-15,88 15,44 190, ,88-16,28 15,84 212, superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Precision boring bar, adjustable Nickel-plated design Adjusting range, from 2-5 for ISO indexable cutting inserts MT and GT cost-effi cient alternative to spindle tools The cost-efficient alternative to spindle tools d min. max. suitable indexable inserts suitable regulation screw suitable lock screw RE1 B 0 B1 A RE1 B 1 B1 A RE2 B 2 B1 A RE3 B 3 B1 A T3.. RE4 B 4 B2 A T3.. RE5 B 5 B2 A T3.. RE6 B 6 B2 A T3.. RE7 B 7 B2 A T3.. RE8 B10 B2 A Spare parts Keys Screws B A B A

123 Indexable-insert core and countersink drill with internal cooling for countersinking and boring The diameter oft he pre/drilled hole must not be smaller than dimension A! Bore tolerances: Indexable insert radius 0.2 = / Indexable insert radius 0.4 = / Single-blade boring bar with internal cooling 1 h6 A 1 for indexable inserts M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B ual-edge boring bar with internal cooling 1 h6 A 1 for indexable inserts M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M A1 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B M. 09T3.. A2 B All prices in euro, VAT excluded Spare parts Screws Keys A B A B Prices in bold print = delivery ex stock

124 Reverse countersinks 180 for rotating use with stationary workpieces for ISO indexable cutting inserts (PMT or M and G) with internal cooling, cylindrical shank with clamping surface (whistle notch) Ø15 and Ø18 without internal cooling 1. positioning: note position of the cutting edges! 2. to move E out of the centre opposed to the cutting edge. 3. Move eccentrically through the drill hole. 4. Move back into the centre. 5. ountersink backward with speed N and feed rate F. 6. Move out of the centre by E opposed to the cutting edge and retract from the drill hole. 5 max. min. 1 3 E 5 = Max. achievable diameter for indexable inserts lamping screw 15 8, , PMT05T1.. M2.2 x 6 T7 A1 B , , M2.5 x 6 T8 A2 B , , M2.5 x 6 T8 A2 B , , M2.5 x 6 T8 A2 B , , M2.5 x 6 T8 A2 B , , M2.5 x 6 T8 A2 B , , T3.. M4 x 8 T15 A3 B , , T3.. M4 x 8 T15 A3 B , , T3.. M4 x 8 T15 A3 B , , T3.. M4 x 8 T15 A3 B , , T3.. M4 x 8 T15 A3 B ,0 40 / 9, / M5 x 11 T20 A3 B ,0 40 / 9, / M5 x 11 T20 A3 B ,0 50 / 11, / M5 x 11 T20 A3 B Spare parts 52,0 50 / 12, / M5 x 11 T20 A3 B Screws Keys A ,95 B A B A B Wrench dimension ISO indexable cutting insertspmt.. Unit prices when purchased in PU (packaging units) = 10 units per size and quality ISO designation oated H 4635 PMT 05T ISO For further ISO indexable inserts, please refer to the turning section High quality for great performance. Swivel bases by ATORN: high-quality s longest service life several different chip geometries This is but one example of ATORN s high-quality turning tools

125 Hand reamers Form B for fit H7 Right-hand cutting, manufacturing tolerances according to IN1420 Helically fl uted, long tap chamfer along 1/4 of the cutting edge length Even number of teeth with irregular teeth pitch for chatter-free reaming of the bore Straight shank and square end utting HSS for reaming through-holes H7 1 1 Z 1,5 1, , ,0 2, , ,5 2, , ,0 3, , ,5 3, , ,0 4, , ,5 4, , ,0 5, , ,5 5, , ,0 6, , ,0 7, , ,0 8, , ,0 9, , ,0 10, , ,0 11, , ,0 12, , ,0 13, , ,0 14, , H7 1 1 Z 15,0 15, , ,0 16, , ,0 17, , ,0 18, , ,0 19, , ,0 20, , ,0 22, , ,0 24, , ,0 25, , ,0 26, , ,0 28, , ,0 30, , ,0 32, , ,0 34, , ,0 35, , ,0 36, , ,0 38, , ,0 40, , superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Hand reamers, adjustable Right-hand cutting, 4 cutting edges Straight shank and square end arge adjusting range, fi ne adjustment with ring gauges or micrometre utting HSS for repair work that does not require narrow fi t tolerances for intermediate sizes model 1 Spare blade set 0 8,0-9, , ,0-10, , ,0-11, , ,0-12, , ,0-13, , ,5-15, ,5-18, ,0-21, ,0-24, ,0-27, ,5-31, , ,5-37, ,0-45, ,0-55, ,0-65, steel hardened steel stainless steel cast irontitanium alloys Set available on request superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

126 Hand taper reamers 1:50 taper for taper pins Form A linear fl uted Form B helically fl uted 7-8 left-handed twist Shank version: ylindrical with square end For taper pins according to IN EN 22339, IN 258, IN EN and IN EN For output bores, we recoend the conical drill bit for pin holes no recoended Ø 13 and Ø 14, not IN * These dimensions are not included in the standard Type A min. max. 1 Z Type A Type B 1,50 1,40 2, ,60* 1,50 2, ,00 1,90 2, ,50 2,40 3, ,00 2,90 4, ,50* 3,40 4, ,00 3,90 5, ,50* 4,40 6, ,00 4,90 6, ,50* 5,40 7, ,00 5,90 8, ,50* 6,40 8, ,00* 6,90 9, ,00 7,90 10, ,00* 8,90 12, ,00 9,90 13, ,00 11,80 16, ,00* 12,86 16, ,00* 13,86 17, ,00 15,80 20, ,00 19,80 24, ,00 24,70 30, ,00 29,70 36, ,00 39,70 46, ,00 49,70 56, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset onical quick-helix reamers 1:50 taper for taper pins Shank version: ylindrical with driving pin lug according to IN 1809 For taper pins according to IN EN 22339, IN 258, IN EN and IN EN helically fl uted, left-handed twist for through-holes, For output bores, we recoend the conical drill bit for pin holes no recoended requires extensive chip removal (the pre-drilled hole must not be excessive) utting HSS Ø 6.5; 13; 14; 16 and Ø 20, not IN min. max ,0 1,90 2, , ,5 2,40 3, , ,0 2,90 4, , ,0 3,90 5, , ,0 4,90 6, , ,0 5,90 8, , ,5 6,40 8, , Z < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset min. max. 1 1 Z 8,0 7,90 10, , ,0 9,90 13, , ,0 11,80 16, , ,0 12,86 17, , ,0 13,86 17, , ,0 15,84 21, , ,0 19,80 25, ,

127 Ship-plate reamers Right hand cutting utting edge lengths 1/3 conical, 2/3 cylindrical Shank version: MT 25 helically fl uted, left-handed twist utting HSS Used for reaming bores that are too small or off set Used for reaming bores that are too small or offset Shank design Z 6, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK Shank design Z 21, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us All prices in euro, VAT excluded Prices in bold print = delivery ex stock

128 Machine reamers Form B, helically fluted with continuous shank up to Ø 2.9 Form, helically fluted with offset shank up to Ø 3.0 for fit H7 Right-hand cutting, straight shank, Manufacturing tolerances according to IN 1420 hip-space ground design utting HSS-E For reaming through-holes, from 3.8, also adequate for blind bores Standard design available on request: Ø 0.65 to Ø 12.05, increasing by 0.01 H7 1 1 Z Standard 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , long design, company standard 1 Z extra-long H7 1 1 Z long alloys 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , overlong design, company standard H H7 < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset 1 1 Z Standard

129 Machine reamer sets Right hand cutting for fit H7 eft-handed twist 7-8 Straight shank in plastic cartridge utting HSS-E, HSS-E TiN-coated escription TiN Set, consisting of 1 reamer each Ø 3 / 4 / 5 / 6 / 8 / 10 / < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset N hundredth machine reamer sets right-hand cutting, left-handed twist 7-8, ground chip space Straight shank Manufacturing tolerances: Nominal dimensions = 0/ Form B to Ø 2.03 with end-to-end shank and centring point on both sides Form from Ø 2.98 with off set shank in plastic cartridge utting HSS-E ontents per set Number of reamers Ø 3.00 / 4.00 / 5.00 / 6.00 / 8.00 / / Ø 2.98 / 3.00 / 3.01 / 3.02 / 3.98 / 4.00 / 4.01 / 4.02 / 4.98 / 5.00 / 5.01 / 5.02 / 5.98 / 6.00 / 6.01 / 6.02 / / 8.00 / 8.01 / 8.02 / 9.98 / / / Ø 0.98 / 0.99 / 1.00 / 1.01 / 1.02 / 1.98 / 1.99 / 2.00 / 2.01 / 2.02 / 2.98 / 3.00 / 3.01 / 3.02 / 3.98 / 3.99 / / 4.01 / 4.02 / 4.98 / 4.99 / 5.00 / 5.01 / 5.02 Ø 5.98 / 5.99 / 6.00 / 6.01 / 6.02 / 6.98 / 6.99 / 7.00 / 7.01 / 7.02 / 7.98 / 7.99 / 8.00 / 8.01/ 8.02 / 8.98 / 8.99 / 9.00 / 9.01 / 9.02 / 9.98 / 9.99 / / / steel hardened steel stainless steel cast irontitanium Super-eg. Fe aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit. austenitic duplex GG GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GFK Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atbreathing protection appar Starting on page Starting on page Starting on page us All prices in euro, VAT excluded Prices in bold print = delivery ex stock

130 N machine reamers for fit H7 Right hand cutting Straight shank without square end Type : helically fl uted with off set shank For utmost true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with straight shank diameters utting HSS-E for reaming through-holes also suited for blind bores H7 1 h6 1 4 Z 3, , , , , , , ,5 6, , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Machine quick-helix reamers for fit H7 Right hand cutting 45 left-handed twist, form E Straight shank with tapered chamfer along approx 1/6 of the cutting edge length for through-holes odd number of teeth, clean, chatter-free surface Broad chip spaces for high cutting speeds and up to 100 % higher feed rates utting HSS-E for reaming through-holes H7 1 h6 1 4 Z 2,0 2, ,5 2, ,0 3, ,2 3, ,5 3, ,0 4, ,5 4, ,0 5, ,0 5, ,0 7, ,0 8, ,0 9, H7 1 h6 1 4 Z 10,0 10, ,0 10, ,0 10, ,0 10, ,0 12, ,0 12, ,0 12, ,0 14, ,0 14, ,0 16, ,0 16, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset

131 Machine reamers Form B for fit H7 Right hand cutting Morse taper helically fl uted, short 45 tap chamfer Even number of teeth with irregular teeth pitch for chatter-free reaming of the bore utting HSS-E For reaming through-holes, chip transport in cutting direction, short tap chamfer permit use for blind bores Standard design, IN 208 eft-handed twist 7 H7 1 Shank design Z Standard 3, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK long 21,0 design, company 62 standard 232 same pitch, 10 left-handed twist MK H7 1 Shank design Z long 14, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK H7 1 Shank design Z Standard 22, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK overlong 50,0 design, 86 company 344 standard MK 4 same pitch, 10 left-handed twist H7 1 Shank design Z extra-long 12, MK , MK , MK , MK , MK , MK , MK , MK , MK , MK superalloys Fe/Nio-based aluminium copper graphite alloys steel hardened steel stainless steel cast irontitanium < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide machine reamers similar to IN 212/8093 for fit H7 Straight shank, from Ø 7.0 steel shank with inner centring according to IN 332 Type B eft-hand flute, form B, 45 chamfer, up to Ø 2.8 with external line-up clamp, from Ø 3.0 with inner centring utting solid carbide K10 for reaming cast iron, white iron, malleable cast iron, cast steel, steel, non-ferrous metal and plastics for through-holes H7 1 h9 1 4 Z 1,5 1, ,0 2, ,5 2, ,0 3, ,5 3, ,0 4, ,5 4, H7 1 h9 1 4 Z 5,0 5, ,0 5, ,0 7, ,0 8, ,0 10, ,0 10, < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset All prices in euro, VAT excluded Prices in bold print = delivery ex stock

132 Solid carbide N machine reamers for fit H7 N shank for accoodation in hydraulic expansion chucks and high-precision collet chucks tight tolerance h6 of the tool shanks for high true running accuracy Type Straight shank, helically fl uted, right-hand cutting utting up to Ø 8 solid carbide K10, > Ø 8 steel shank with solid carbide head for reaming through-holes also suited for blind bores H7 1 h6 1 Z 1, , , , , , , , , , , , , , , , , H7 1 h6 1 Z 6, , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset Solid carbide machine reamers Form B, form from Ø left-handed twist, right-hand cutting, straight shank 1/100 pitchtolerances: Ø 0.70 to / Ø 3.01 to / Ø 6.01 to / utting solid carbide K15F (Ø > 7.55 with carbide head) for through-holes, Specify nominal dimension in, four digits e.g = 0072, 5.14 = 0514, = = = = = = = = = = = = = = , , ,0 6 Z steelhardened steel stainless steel cast irontitanium superalloys Fe/Nio-based aluminium copper graphite < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset , , , , , , , , , Z

133 Solid carbide high-speed machine reamers Right-hand cutting, with internal cooling Suitable for HP machining TiAlN ultra-coated N shank for direct accoodation in hydraulic expansion chucks and high-precision collet chucks Adapter or special holding fi xtures unnecessary tight tolerance h6 of the tool shanks for high true running accuracy Version with linear fl utes, coolant exits on the face side, for blind holes esign with 7 left-hand fl ute, lateral coolant exit, for through-holes Manufacturing tolerances: H7 in accordance with IN 1420 Uncoated versions available on request 1 h6 1 Z For clearance For blind hole 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , h6 1 Z For clearance For blind hole 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , < 700 N/² < 1000 N/² < 1400 N/² < 55 HRc < 60 HRc 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc 30 HRc < 8 % Si 8 % Si u-alloy GRP/FP/thermoset High quality for great performance. Solid carbide high-performance twist drills by ATORN: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flew precision-ground for safest machining This is but one example of ATORN s high-quality drilling tools. All prices in euro, VAT excluded Prices in bold print = delivery ex stock

134 MH Modular tool system Bohren Modular tool system for line boring, milling, drilling, thread cutting Rigid high-precision system, developed and manufactured with state-of-the-art design engineering and production resources based on decades of experience A system of extreme flexibility and simplicity for machine tools, machining centres and flexible production facilities. For machining with very strict tolerance values and with a high-grade surface finish Patented cylindrical/conical coupling and radial expansion bolts to ensure maximum rigidity and concentricity during boring and milling work Internal coolant supply in all elements Available in eight sizes that enables full replaceability Type 1 M1 S Nm MH MH MH MH MH MH MH MH Preisangaben in Euro, zzgl MwSt. Artikel mit fettgedruckten Preisen = agerware

135 MH base holders ase-hardened steel, hardened and ground to tolerance AT3. one ISO 40 recoended exclusively for size MH-50 For heavy milling work and bores with a depth of more than 250 and more than 125 in Ø, a base holder size MH-80 shall be used. Special base holder models are available on request. IN A, ISO 7388/1 Shank design Type MH d1 1 Weight kg ISO 40 IN69871-A40 MH , ISO 40 IN69871-A40 MH , ISO 50 IN69871-A50 MH , ISO 50 IN69871-A50 MH , ISO 50 IN69871-A50 MH , IN B Shank design Type MH d1 1 Weight kg ISO B40 MH , ISO B40 MH , MAS 403 BT Shank design Type MH d1 1 Weight kg ISO 30 MAS403-BT30 MH , ISO 40 MAS403-BT40 MH , ISO 40 MAS403-BT40 MH , ISO 50 MAS403-BT50 MH , IN 2080-A, OTT Shank design Type MH d1 1 M Weight kg ISO 40 IN2080-A40 MH ,5 M16 0, ISO 50 IN2080-A50 MH M24 2, ISO 50 IN2080-A50 MH M24 2, ISO 50 IN2080-A50 MH M24 3, IN A, HSK Type MH d1 1 Weight kg HSK-A63 MH , All prices in euro, VAT excluded Prices in bold print = delivery ex stock

136 Solid carbide MH base holder, cyl. BM ue to the use of solid carbide MH base holders, diff erent machining depth can be achieved. ine boring up to 10x! Type MH d MH extensions PR Weight kg BM 16/ , BM 16/ , BM 16/ , BM 20/ , BM 20/ , BM 20/ , Type MH d Weight kg BM 25/ , BM 25/ , BM 25/ , BM 32/ , BM 32/ , BM 32/ , ue to the use of MH extensions, diff erent machining depth can be achieved; various extensions are available for any MH size Type MH d1 Weight kg PR , PR , PR , PR , PR , PR , PR , PR , PR , MH reducers R Type MH d1 Weight kg PR , PR , PR , PR , PR , PR , PR , PR , The reductions permit the use of elements of smaller MH sizes. In this way, the MH system can be used even more fl exibly. A greater stiff ness is achieved by using smaller MH tools in larger fi xtures. Type MH d1 MH d2 1 MH reducers RAV Weight kg R 20/ , R 25/ , R 25/ , R 32/ , R 32/ , R 32/ , R 40/ , R 40/ , R 40/ , R 40/ , R 50/ , Type MH d1 MH d2 1 Weight kg R 50/ , R 50/ , R 50/ , R 50/ , R 50/ , R 50/ , R 50/ , R 50/ , R 50/ , R 63/ , R 80/ , low-vibration Type MH d1 MH d2 3 1 Weight kg RAV 50/ , RAV 50/ , RAV 50/ , RAV 50/ , Type MH d1 MH d2 3 1 Weight kg RAV 50/ , RAV 63/ , RAV 80/ ,

137 MH two-flute boring bars TS Rigid design, spline surfaces between the insert holders onstant distance between insert holder clamping screw and cutting edge Note: when using only one insert holder, the protective plug PT should be fi tted (optional) hamfer rings (AS) are available on request TS Ø Type MH d1 2 1 S... for exchangeable plates for exchangeable S plates for exchangeable T plates Weight kg TS 16/ S...16 yes 0, TS 20/ S...20 yes 0, TS 25/ S...25 yes 0, TS 32/32 35, S yes yes 0, TS 40/ S yes yes 0, TS 50/ S...50 yes yes 1, TS 50/ S...63 yes yes yes 2, TS 63/ S...63 yes yes yes 3, TS 80/ S...80 S...90 yes yes yes 5, MH insert holder SS / SM / SSS for dual-edge boring bars Insert holders type SST available on request SS Type 6 5 for indexable inserts Screw Wrench size SS TS25 T SS TS25 T SS TS25 T SS TS25 T SS T3.. TS4 T SS T3.. TS4 T SS TS5 T SS TS5 T SS , TS5 T SS , TS5 T SS TS5 T SM Type 6 5 for indexable inserts Screw Wrench size SM TS25 T SM TS25 T SM T3.. TS4 T SM T3.. TS4 T SM TS5 T SM TS5 T SM , TS5 T SM , TS5 T SM TS5 T SSS Type 6 5 for indexable inserts Screw Wrench size SSS ,5 S.. 09T3.. TS4 T SSS S.. 09T3.. TS4 T SSS S TS5 T SSS ,5 S TS5 T SSS ,5 S TS5 T SSS S TS5 T All prices in euro, VAT excluded Prices in bold print = delivery ex stock

138 MH micrometric bore bar system The boring heads TRM and micrometric boring bars ensure a tolerance of IT6 with an optimum surface fi nish quality. The setting with a radial correction of 1μm can easily be read off the vernier scale and executed directly on the machine. High-precision boring head TRM 50/50 Ø 6-84 Type SF.. Weight kg TRM 50/ , Boring bar for high-precision boring head TRM 50/50 and TRM 50HS Type 1 for indexable inserts Screw Wrench size B WGT TS 21 T B WGT TS 21 T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T Boring bar, low-vibration for high-precision boring head TRM 50/50 and TRM 50HS Type for indexable inserts Screw Wrench size B WGT TS21 T B WGT TS21 T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T Solid carbide boring bar (approx. 8 x ) for high-precision boring head TRM 50/50 and TRM 50HS Type for indexable inserts Screw Wrench size B WGT TS21 T B WGT TS21 T B TPGX S250T T B TPGX S250T T B TPGX S250T T B TPGX S250T T Base holder P Type suitable for Weight kg P SFTP 25 and SFTP 32 0,

139 Reducing bushes, cylindrical for high-precision boring head TRM 50/50 and TRM 50HS Type H6 1 g High-precision boring head TRM Ø Type MH d1 7 SF.. for exchangeable S plates for exchangeable T plates Weight kg TRM 16/ yes 0, TRM 20/ yes 0, TRM 25/ yes yes 0, TRM 32/32 35, yes yes 0, TRM 40/ yes yes 0, High-precision boring head TRM Ø Type MH d1 1 TRM 50/ TRM 63/ TRM 50/ TRM 80/ TRM 80/ , , , , PS Weight kg 1,7 1, ,0 2, ,6 2, ,1 3, ,2 8,1 9, , SFTP insert holder for high-precision boring head TRM Type 6 5 for indexable inserts Screw Wrench size SFTP ,5 TPGX S250T T SFTP 32 35, ,5 TPGX S250T T SFTP TPGX S300890T T SFTP TPGX S300890T T SF insert holder for high-precision boring head TRM Type 6 5 for indexable inserts Screw Wrench size SF TS25 T SF TS25 T SF , TS25 T SF 32 35, ,5.. 09T3.. TS4 T SF T3.. TS4 T SF T3.. TS4 T All prices in euro, VAT excluded Prices in bold print = delivery ex stock

140 MH base holder Base holder PS for high-precision boring heads TRM (for SF insert holder 50) Type 5 6 Weight kg PS , , PS , PS , PS , PS , PS , PS , PS , Base holder P Type Base holder P Type 1 1 suitable for boring bars 2 Weight kg P , 08, 11, 16, 22 0, Weight kg P , P , P , P , P , P , ounterweight W 32 Type W Kit K01, TRM 50/50 Modular tool system Ø ontents 1 TRM 50/50: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22, 1 P25.63 Each 1 SFTP25 / SFTP32 / SFTP50, 1 PS 31.24, 5 TPGX090202, 1 TPGX110302, 2 WGT020102, 1 W

141 Modular tool system Sets K01, TRM 50/63 and TRM 63/63 Ø ontents 1 TRM 50/63: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22, Each 1 P20.30 / P02.30 / P03.30, 1 PS 11.30, Each 1 SFTP25 / SFTP32/ SFTP50, 5 TPGX090202, 1 TPGX110302, 2 WGT TRM 63/63: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22, Each 1 P20.30 / P02.30 / P03.30, 1 PS 11.30, Each 1 SFTP25 / SFTP32/ SFTP50, 5 TPGX090202, 1 TPGX110302, 2 WGT Modular tool system Sets K01, TRM 50/80 and TRM 80/80 Ø ontents 1 TRM 50/80: Each 1 B3.06 / B3.08 / B3.11/ B3.16 / B3.22, Each 1 P20.30 / P02.30, Each 1 P03.30 / P04.30, Each 1 PS / PS13.30, Each 1 SFTP25 / SFTP32 / SFTP50, 5 TPGX090202, 1 TPGX110302, 2 WGT TRM 80/80: Each 1 B3.06 / B3.08 / B3.11/ B3.16 / B3.22, Each 1 P20.30 / P02.30, Each 1 P03.30 / P04.30, Each 1 PS / PS13.30, Each 1 SFTP25 / SFTP32 / SFTP50, 5 TPGX090202,1 TPGX110302, 2 WGT All prices in euro, VAT excluded Prices in bold print = delivery ex stock