Solid carbide Twist Drills Overview

Transcription

1 Solid carbide Twist Drills Overview Manufacturer ß DIN similar to Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ Item number Material VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM Diameters mm 0,5 -, N N N N N N N N N UNI UNI UNI UNI Point angle Coating TiN TiAlN TiN TiAlN TiN TiAlN TiAlN TiAlN TiAlN Page in catalogue Suitability W = suitable X = partially suitable Aluminium < 0% Si W W W W W W W W W W W W W Aluminium > 0% Si W W W W W W W W W W W W W Copper W W W W W W W W W W W W Brass Steel < 520N W W W W W W W W W W W W Steel < 750N W W W W W W W W W W W W Steel < 900N W W W W W W W W W W W W Steel < 00N W W W W W W W W W W W W Steel < 200N W W W W W W W W W W W W Steel < 400N W W W W W W W W W W W W VA-steel < 900N W W W W W W W W W W W VA-steel > 900N W W W W W W W W W GG W W W W W W W W W W W W GGG W W W W W W W W W W W W Titanium X W X W W W W Titanium alloys X W X W W W W Nickel W W W < 55HRC < 60HRC < 67HRC Plastice X X X X X X Manufacturer T T T 0 0 ß ß DIN works norm works norm works norm works norm works norm works norm works norm works norm works norm works norm 5 x D, IKZ 5 x D, IKZ 8 x D, IKZ 8 x D, IKZ 2 x D, IKZ 20 x D, IKZ 25 x D, IKZ 30 x D, IKZ 5 x D, IKZ 8 x D, IKZ hard hard Item number Material VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM VHM Diameters mm ,5-20 2,5-20 2, UNI UNI UNI UNI UNI Deep hole Deep hole Alu-Cut Alu-Cut Alu-Cut H H Point angle Coating TiAlN TiAlN TiAlN TiAlN TiAlN TiAlN TiAlN TiAlN Alu-CC Alu-CC TiAlN TiAlN Page in catalogue Suitability W = suitable X = partially suitable Aluminium < 0% Si W W W W W W W Aluminium > 0% Si W W W W W W W Copper W W W W W W W Brass W W Steel < 520N W W W W W W W W Steel < 750N W W W W W W W W Steel < 900N W W W W W W W W Steel < 00N W W W W W W W W Steel < 200N W W W W W W W W Steel < 400N W W W W W VA-steel < 900N W W W W W W W W VA-steel > 900N W W W W W W W W GG W W W W W W W W GGG W W W W W W W W Titanium W W W W Titanium alloys W W W W Nickel < 55HRC W W < 60HRC W W < 67HRC W Plastics

2 Solid carbide micro drill Solid carbide twist drill 05 Solid carbide micro drill ß High-performance miniature drill with extra long spiral. Shank Ø h6 for shrinking. High true-running accuracy and precision ground for the usage with HPC. Shank Ø,0 mm up to a drilling Ø 0,79 mm, Shank Ø,5 mm up to drilling Ø,49 mm, Shank Ø 2,0 mm starting at drilling Ø,50 mm. Tolerance drilling Ø +0,004. Multi-purpose use, even for difficult to machine materials with a strength of up to 400 N/mm 2. Solid carbide ähnl.din 899 HPC 05 Solid carbide d l 05 mm mm 0,5,0 0 0,6,0 02 0,7,0 03 0,8,0 04 0,9,0 05 0,20 2,0 06 0,2 2,0 07 0,22 2,0 08 0,23 2,0 09 0,24 2,0 0 0,25 2,0 0,26 2,5 2 0,27 2,5 3 0,28 2,5 4 0,29 2,5 5 0,30 2,5 6 0,3 3,0 7 0,32 3,0 8 0,33 3,0 9 0,34 3,0 20 0,35 4,0 2 0,36 4,0 22 0,37 4,0 23 0,38 4,0 24 0,39 4,0 25 0,40 4,0 26 0,4 4,0 27 0,42 4,0 28 0,43 4,0 29 0,44 4,0 30 0,45 6,0 3 0,47 6,0 33 0,48 6,0 34 0,49 6,0 35 0,50 6,0 36 0,5 6,0 37 0,52 6,0 38 0,53 6,0 39 0,55 6,0 4 0,56 6,0 42 0,57 6,0 43 0,58 6,0 44 0,59 6,0 45 0,60 6,0 46 Solid carbide d l 05 mm mm 0,6 6,0 47 0,62 6,0 48 0,63 6,0 49 0,64 6,0 50 0,65 7,0 5 0,66 7,0 52 0,67 7,0 53 0,68 7,0 54 0,69 7,0 55 0,70 7,0 56 0,7 7,0 57 0,72 7,0 58 0,73 7,0 59 0,75 8,0 6 0,76 8,0 62 0,77 8,0 63 0,79 8,0 65 0,80 8,0 66 0,8 8,0 67 0,82 8,0 68 0,83 8,0 69 0,84 8,0 70 0,85 8,0 7 0,87 8,0 73 0,88 8,0 74 0,90 8,0 76 0,9 8,0 77 0,92 8,0 78 0,93 8,0 79 0,95 0,0 8 0,96 0,0 82 0,98 0,0 84,00 0,0 86,05 0,0 87,0 0,0 88,5 2,0 89,20 2,0 90,25 2,0 9,30 2,0 92,35 2,0 93,40 2,0 94,45 2,0 95,83 2,

3 ß flutes, with straight shank, right-hand cut, point angle 8, four-surface grind. 020 For drilling steel with a strength of up to 400 N/mm 2, cast iron, cast steel, copper, aluminium, thermosetting plastics, glass-fibre and carbon reinforced plastics and laminated paper. Carbide, K0/K20. Solid carbide twist drills 02 Carbide, K0/K20 TiN-coated. 022 Also suitable for difficult to machine and hardened steel with a hardness of up to 45 HRC. Carbide, K0/K20 TiAlN-coated. DIN Cutting Solid carbide Solid carbide/tin Solid carbide/tialn d h8 l 2 l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Solid carbide Solid carbide/tin Solid carbide/tialn d h8 l 2 l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

4 Solid carbide twist drill Solid carbide countersinking cutters Extra short solid carbide twist drill 0 2 flutes, with straight shank, right-hand cut, point angle 8, special deep hole profile. For drilling steel with a strength of up to 400 N/mm 2, cast iron, cast steel, copper, aluminium, thermosetting plastics, glass-fibre and carbon reinforced plastics and laminated paper. 033 Also suitable for difficult to machine steel with a hardness of up to 45 HRC. TiAlN-coated. DIN TiN-coated Solid carbide Solid carbide/tin Solid carbide/tiain d h6 l 2 l , , 7 28, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Solid carbide Solid carbide/tin Solid carbide/tiain d h6 l 2 l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

5 ß Solid carbide countersinking cutters DIN 6539 Z flutes with straight shank. Tolerance zone H7. Web-thinning: up to the centre of the drill, Profil shape: 3 flutes with rounded heels, core thickness: reinforced, surface: polished For drilling grey cast iron, short-chipping brass, long-chipping Al alloys with high Si-content, thermosetting plastics. Boreholes with high grade of measurement and positioning accuracy are produced on modern machine tools. 040 Carbide-K0/K TiN-coated. For increased service life. Cutting Solid carbide Solid carbide/tin d h7 l 2 l , , , , , , , , , , , , , , , , , Solid carbide Solid carbide/tin d h7 l 2 l , , , , , , , , , , , , , , , , Performance requires quality. ATORN s taps: ATORN s high-quality drilling tools.

6 Solid carbide twist drills 3 x D 0 Short version, 2 flutes, with reinforced core and heavy-duty ground centre point and special webthinning. 049 With smooth shank in compliance with DIN 6535 HA. 050 With clamping surface in compliance with DIN 6535 HE Solid carbide twist drill Solid carbide high-performance oil feed drills d d 2 l 2 l DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

7 ß Short type, especially web-thinned, with reinforced core and heavy-duty ground centre point, right-hand cut. Point angle approx. 40. Multi-purpose carbide fine grit/tialn pluscoated. Drilling tools with internal cooling are of higher performance with coolant pressure of minimum 30 Solid carbide high-performance oil feed drills 3 x D bar. The higher the pressure, the higher the performance. Regrinding of heavy-duty drills possible on any tool grinding machine. 059 With smooth shank in compliance with DIN 6535 HA. 060 With clamping surface in compliance with DIN 6535 HE. HPC Cutting DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

8 Solid carbide high-performance oil feed drills Solid carbide high-performance oil feed drills 5 x D 0 Long version, spiral flutes, relieved cone grind with secondary free surface. Multi-purpose carbide fine grit/tialn pluscoated. Drilling tools with internal cooling are of higher performance with coolant pressure of minimum 30 bar. The higher the pressure, the higher the performance. Regrinding of heavy-duty drills possible on 064 With smooth shank in compliance with DIN 6535 HA. 065 With clamping surface in compliance with DIN 6535 HE. any tool grinding machine. DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , HPC.8

9 ß Extra long version, spiral flutes, relieved cone grind with secondary free surface. Multi-purpose carbide fine grit/tialn pluscoated. Drilling tools with internal cooling are of higher performance with coolant pressure of minimum 30 bar. The higher the pressure, the higher the performance. Regrinding of heavy-duty drills possible on any tool grinding machine. Solid carbide high-performance oil feed drills 8 x D 066 With smooth shank in compliance with DIN 6535 HA. 067 With clamping surface in compliance with DIN 6535 HE. HPC Cutting d d 2 l 2 l DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 3,0 30, , 30, ,2 30, ,3 30, ,4 35, ,5 35, ,6 35, ,7 35, ,8 37, ,9 37, ,0 37, , 37, ,2 37, ,3 45, ,4 45, ,5 45, ,6 45, ,7 45, ,8 50, ,9 50, ,0 50, , 50, ,2 50, ,3 50, ,4 57, ,5 57, ,7 57, ,8 57, ,9 57, ,0 57, ,2 66, ,3 66, ,5 66, ,6 66, ,7 66, ,8 66, ,9 76, ,0 76, , 76, ,2 76, ,5 76, ,6 76, ,7 76, ,8 76, ,0 76, DIN 6535 HA DIN 6535 HE d m7 l 2 l d 2 h mm 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

10 Solid carbide high-performance oil feed drills Solid carbide deep hole drills Solid carbide high-performance oil feed drills 2 x D With reinforced straight shank in compliance with DIN 6535 HA. Reinforced core with special web-thinning for high centring accuracy. Very high accuracy of fit and stabilisation by means of 4 guiding lands. The flat rake, the rounding of the edges and the flute shape result in short chips. Total length of the drill is usable without raising it. Very high surface quality. Solid carbide finest grit/tialn plus-coated. d HPC l 2 l d Drilling tools with internal cooling are of higher performance with coolant pressure of minimum 30 bar. The higher the pressure, the higher the performance. Regrinding of heavy-duty drills possible on any tool grinding machine. DIN 6535 HA d h7 l 2 l d 2 h5 072 mm 3, , , , , , , , , , , , , , , , DIN 6535 HA d h7 l 2 l d 2 h5 072 mm 7, , , , , , , , , , , , , , , For shrinking machines and liquid coolant cooling units see page 2.24 cont..0

11 ß Solid carbide deep hole drills 20/25/30 x D HPC T Spiral flutes, optimised flute cross-section, head coated for easy chip transport, maximum coolant bore diameter. Solid carbide/tiain-coated. Cutting Minimum coolant pressure 40 bar. Before the deep hole drilling, drill pilot (min. xd). Enter the pilot drilling with approx. 300 rpm at f=500 mm/min. Adjust the coolant lubrication pressure and suitable rpm. Continuous drilling all the way to the bottom of the borehole without chip removal cycle. For through-holes with slanted exit, reduce the feed speed Vf by 60 % approx. mm before breakthrough. After reaching the boring depth, switch off rpm and coolant - Remove in rapid feed. All deep hole drills must be guided at the beginning. Deep hole drills must never be moved around with full speed. 20 x D d h7 d 2 h6 l l 2 l mm mm 3, , , , , , , , , , , , , , , , x D d h7 d 2 h6 l l 2 l 3 08 mm mm 3, , , , , , , , , , , , , , , x D d h7 d 2 h6 l l 2 l mm mm 3, , , , , , , , , , , , , ,

12 Solid carbide high-performance twist drills Solid carbide twist drill Solid carbide high-performance twist drills ALUSPEED 5 x D / 8 x D 0 With 6-x guiding land. Polished chip compartment for perfect chip removal. Aluminium coating for longest service life. Safe machining even in series production. Solid carbide/aluminium-cc-coated HPC Minimum coolant pressure 25 bar. Drilling tools with internal coolant feed operate more efficiently, when the coolant pressure is 30 bar or higher. The higher the pressure, the better the performance. 5 x D d m7 l 2 l d 2 h6 085 mm 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , x D d m7 l 2 l d 2 h6 086 mm 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Alu Alu Alu Cu Cu Cu CuNi CuNi Brass Brass Bronze Bronze unalloyed wrought alloy wrought alloy Al< 6%Si Al<2%Si Al>2%Si unalloyed wrought alloy notwrought alloy Alloys alloys long-chippingshort-chippinglong-chippingshort-chipping cured cured cured cured long-chipping

13 ß 07 ß With smooth straight shank Dimensions in compliance with works norm. Solid carbide finest grit/tiain-coated Solid carbide twist drill 60 HRC HPC Cutting Solid carbide/tialn d l l2 d2 07 mm 2, , , , , , , , , , , , , , , , , , , , , , , , , Solid carbide/tialn d l l2 d2 07 mm 7, , , , , , , , , , , , , , , , , , , , , , , , , ß With smooth straight shank, straight flute. Solid carbide finest grit/tialn-coated. Solid carbide high-performance twist drills 67 HRC HPC 67 HRC VHM/TiAlN d m7 d 2 h6 l l mm,0, ,5, ,0 2, ,5 2, ,7 2, ,0 3, ,3 3, ,5 3, ,0 4, ,2 4, ,5 4, ,0 5, VHM/TiAlN d m7 d 2 h7 l l mm 5,5 5, ,0 6, ,5 6, ,8 6, ,0 7, ,0 8, ,5 8, ,0 0, ,2 0, ,0 2, ,0 4,

14 069 Solid carbide thread boring tools ß With straight shank, self-centring. For removing broken HSS and HSS-E taps. Solid carbide micro finest grit/tin-coated. This tool must only be used with rigid clamping. Do NOT use with column drilling machines or similar tools. 069 Solid carbide thread boring tools Carbide twist drills Reversible cutting insert mount d h9 l 2 l d 2 h6 069 mm 3, , , , , d h9 l 2 l d 2 h6 069 mm 0, , , , , Carbide twist drills With straight shank, ground flute, with carbide blades. For drilling steel N/mm 2, cast steel above 700N/mm 2, grey, chilled, malleable cast iron and gun metal, brass, bronze etc. Carbide-tipped blades K20. d DIN l 2 l d h8 l 2 l 070 3, , , , , , , , , , , d h8 l 2 l 070 8, , , , , , , , , , , Carbide twist drills With morse taper shank, with carbide blades in compliance with DIN 800. For drilling steel N/mm 2, cast steel above 700N/mm 2, grey, chilled, malleable cast iron and gun metal, brass, bronze etc. Carbide-tipped blades K0/20. d DIN l 2 l d l 2 l Shank 20 MT d l 2 l Shank 20 MT

15 ß ß Right-hand cut. Ø 8,0 -,5 mm with straight shank in compliance with DIN 835 HA, Ø 2,0-40,0 mm with straight shank in compliance with DIN 835 HB. With polished chip compartments for perfect chip removal. Cutting blades not included. For drilling of precise boreholes in /0 mm increments. Reversible cutting insert mount 3 x D / 5 x D Made of high-strength, heat-resistant powder metal. Cutting blades not included. Reversible cutting inserts see cat.-no x D Ø Dh 7 for RCI shank-ø L L2 L3 30 mm up to Ø mm d h6 mm 8,0 8,4 0, ,5 8,9 0, ,0 9,4 0, ,5 9,9 2, ,0 0,4 2, ,5 0,9 2, ,0,4 2, ,5,9 2, ,0 2,4 6, ,5 2,9 6, ,0 3,4 6, ,5 3,9 6, ,0 4,4 6, ,5 4,9 20, ,0 5,4 20, ,5 5,9 20, ,0 6,4 20, ,5 6,9 20, ,0 7,4 20, ,5 7,9 20, ,0 8,4 20, ,5 8,9 20, ,0 9,4 20, ,5 9,9 20, ,0 20,4 25, ,5 20,9 25, ,0 2,4 25, ,5 2,9 25, ,0 22,4 25, ,5 22,9 25, ,0 23,4 25, ,5 23,9 25, ,0 24,4 32, PM Cutting x D Ø Dh 7 for RCI shank-ø L L2 L3 30 mm up to Ø mm d h6 mm 24,5 24,9 32, ,0 25,4 32, ,5 25,9 32, ,0 26,4 32, ,5 26,9 32, ,0 27,4 32, ,5 27,9 32, ,0 28,4 32, ,5 28,9 32, ,0 29,4 32, ,5 29,9 32, ,0 30,4 32, ,5 30,9 32, ,0 3,4 32, ,5 3,9 32, ,0 32,4 32, ,5 32,9 32, ,0 33,4 32, ,5 33,9 32, ,0 34,4 40, ,5 34,9 40, ,0 35,4 40, ,5 35,9 40, ,0 36,4 40, ,5 36,9 40, ,0 37,4 40, ,5 37,9 40, ,0 38,4 40, ,5 38,9 40, ,0 39,4 40, ,5 39,9 40, ,0 40,4 40, HA HB 5 x D Ø D for RCI shank Ø L L2 L3 3 mm up to Ø mm d h6 mm 8,0 8,4 0, ,5 8,9 0, ,0 9,4 0, ,5 9,9 2, ,0 0,4 2, ,5 0,9 2, ,0,4 2, ,5,9 2, ,0 2,4 6, ,5 2,9 6, ,0 3,4 6, ,5 3,9 6, ,0 4,4 6, ,5 4,9 20, ,0 5,4 20, ,5 5,9 20, ,0 6,4 20, ,5 6,9 20, ,0 7,4 20, ,5 7,9 20, ,0 8,4 20, ,5 8,9 20, ,0 9,4 20, ,5 9,9 20, ,0 20,4 25, x D Ø D for RCI shank Ø L L2 L3 3 mm up to Ø mm d h6 mm 20,5 20,9 25, ,0 2,4 25, ,5 2,9 25, ,0 22,4 25, ,5 22,9 25, ,0 23,4 25, ,5 23,9 25, ,0 24,4 32, ,5 24,9 32, ,0 25,4 32, ,5 25,9 32, ,0 26,4 32, ,5 26,9 32, ,0 27,4 32, ,5 27,9 32, ,0 28,4 32, ,5 28,9 32, ,0 29,4 32, ,5 29,9 32, ,0 30,4 32, ,5 30,9 32, ,0 3,4 32, ,5 3,9 32, ,0 32,4 32, ,5 32,9 32, continuation.

16 Reversible cutting insert mount Reversible cutting inserts ß Right-hand cut. Ø 8,0 -,5 mm with straight shank in compliance with DIN 835 HA, Ø 2,0-40,0 mm with straight shank in compliance with DIN 835 HB. With polished chip compartments for perfect chip removal. Cutting blades not included. For drilling of precise boreholes in /0 mm increments. Reversible cutting insert mount 5 x D / 7 x D Made of high-strength, heat-resistant powder metal. Cutting blades not included. Reversible cutting inserts see cat.-no. 35. PM HA HB x D Ø D for RCI shank Ø L L2 L3 3 mm up to Ø mm d h6 mm 33,0 33,4 32, ,5 33,9 32, ,0 34,4 40, ,5 34,9 40, ,0 35,4 40, ,5 35,9 40, ,0 36,4 40, ,5 36,9 40, x D Ø D for RCI shank Ø L L2 L3 32 mm up to Ø mm d h6 mm 8,0 8,4 0, ,5 8,9 0, ,0 9,4 0, ,5 9,9 2, ,0 0,4 2, ,5 0,9 2, ,0,4 2, ,5,9 2, ,0 2,4 6, ,5 2,9 6, ,0 3,4 6, ,5 3,9 6, ,0 4,4 6, ,5 4,9 20, ,0 5,4 20, ,5 5,9 20, ,0 6,4 20, ,5 6,9 20, ,0 7,4 20, ,5 7,9 20, ,0 8,4 20, ,5 8,9 20, ,0 9,4 20, ,5 9,9 20, ,0 20,4 25, ,5 20,9 25, ,0 2,4 25, ,5 2,9 25, ,0 22,4 25, ,5 22,9 25, ,0 23,4 25, ,5 23,9 25, ,0 24,4 32, x D Ø D for RCI shank Ø L L2 L3 3 mm up to Ø mm d h6 mm 37,0 37,4 40, ,5 37,9 40, ,0 38,4 40, ,5 38,9 40, ,0 39,4 40, ,5 39,9 40, ,0 40,4 40, x D Ø D for RCI shank Ø L L2 L3 32 mm up to Ø mm d h6 mm 24,5 24,9 32, ,0 25,4 32, ,5 25,9 32, ,0 26,4 32, ,5 26,9 32, ,0 27,4 32, ,5 27,9 32, ,0 28,4 32, ,5 28,9 32, ,0 29,4 32, ,5 29,9 32, ,0 30,4 32, ,5 30,9 32, ,0 3,4 32, ,5 3,9 32, ,0 32,4 32, ,5 32,9 32, ,0 33,4 32, ,5 33,9 32, ,0 34,4 40, ,5 34,9 40, ,0 35,4 40, ,5 35,9 40, ,0 36,4 40, ,5 36,9 40, ,0 37,4 40, ,5 37,9 40, ,0 38,4 40, ,5 38,9 40, ,0 39,4 40, ,5 39,9 40, ,0 40,4 40, Performance requires quality. Solid carbide milling cutters by ATORN: ATORN s high-quality milling tools..6

17 ß 35 ß For mounting in reversible cutting insert mount cat.- no For drilling precise boreholes in steel, cast iron, and Al alloys. Solid Carbide/TiAlN-coated. Reversible cutting inserts solid carbide/tialn Insert a new clamping screw with every substitution of inserts (included). Cutting HPC 45 VA 35 Solid carbide/tiain Ø 35 mm 8, , , , , , , ,0 00 0,2 02 0,5 05 0,8 08,0 0,2 2,5 5,8 8 2,0 20 2,5 25 2,8 28 3,0 30 3, 3 3,5 35 3,8 38 4,0 40 4,5 45 4,8 48 5,0 50 5, 5 5,5 55 5,8 58 6,0 60 6,5 65 6,8 68 7,0 70 7,5 75 Solid carbide/tiain Ø 35 mm 7,8 78 8,0 80 8,5 85 8,8 88 9,0 90 9,5 95 9, , , , ,0 20 2,5 25 2, , , , , , , , , , , , , , , , , , , , , ,7 287 Solid carbide/tiain Ø 35 mm 29, , , , , , ,0 30 3,5 35 3, , , , , , , , , , , , , , , , , , , , , , , , , , Spare Clamping Screws For reversible cutting insert mount cat.-no for drill size hexagon 37 Ø mm size 8,0 -,5 M 2,5 x 3,3 0 2,0-9,5 M 3 x 5, ,0-27,5 M 4 x 6 2, ,0-3,5 M 5 x 8 2, ,0-40,0 M 6 x 2 3,0 05

18 Twist drill for reversible cutting inserts Carbide reversible cutting inserts 50 Twist drill for reversible cutting inserts 3 x D ß Right-hand cut, with straight shank, two-fluted, with internal coolant feed. Cutting blades not included. Horizontal use, rotating or standing-up in machine tools For reversible cutting inserts SPMT/SPET, see cat.- no For reversible cutting inserts NPET/NPMT, see cat.- no Cutting inserts see cat.-no. 52, spare screw see cat.-no. 54. E HPC Ø D D 2 L L 2 L 3 cutting inserts 50 mm mm Description SPMT SPMT SPMT SPMT SPMT SPMT SPMT SPMT SPMT SPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT NPMT Technical information on twist drills with reversible cutting inserts cat.-no. 50 Required driving power coolant pressure driving power (KW) coolant pressure l/min drill Ø mm drill Ø mm Slant Semicircle Core drilling Overlap drilling Stack drilling Feed must be reduced by % for these applications!.8

19 ß 52 ß Positive, with sintered-in chip deflection step. For twist drills with reversible cutting inserts cat.- no.50. Carbide reversible cutting inserts SPMT/SPET/NPET/NPMT 52 0 Cutting ISO Carbide l d s d 52 description quality mm a SPMT DM H42 5,3 5,3 2,4 2,3 0 pcs. 0 SPMT DS H55 5,3 5,3 2,4 2,3 0 pcs. 02 SPET AL H2 5,3 5,3 2,4 2,3 0 pcs. 03 SPMT DM H42 6,2 6,2 2,5 2,5 0 pcs. 05 SPMT DS H55 6,2 6,2 2,5 2,5 0 pcs. 06 SPET AL H2 6,2 6,2 2,5 2,5 0 pcs. 07 SPMT DM H42 7,2 7,2 2,5 2,8 0 pcs. 09 SPMT DS H55 7,2 7,2 2,5 2,8 0 pcs. 0 SPET AL H2 7,2 7,2 2,5 2,8 0 pcs. NPET AL H2 8,3 8,2 2,5 2,8 0 pcs. 5 NPMT DM H42 8,3 8,2 2,5 2,8 0 pcs. 3 NPMT DS H55 8,3 8,2 2,5 2,8 0 pcs. 4 NPET AL H2 9,3 8,2 3,3 3,4 0 pcs. 9 NPMT DM H42 9,3 8,2 3,3 3,4 0 pcs. 7 NPMT DS H55 9,3 8,2 3,3 3,4 0 pcs. 8 NPET AL H2 0,3 0,2 3,3 3,4 0 pcs. 23 NPMT DM H42 0,3 0,2 3,3 3,4 0 pcs. 2 NPMT DS H55 0,3 0,2 3,3 3,4 0 pcs. 22 NPET AL H2 3,0 2,9 3,97 4,0 0 pcs. 27 NPMT DM H42 3,0 2,9 3,97 4,0 0 pcs. 25 NPMT DS H55 3,0 2,9 3,97 4,0 0 pcs Spare Clamping Screws For twist drills with reversible cutting inserts cat.-no for drill size Torx 54 Ø mm size a 3-5 M 2 x 4,2 T 6 0 pcs M 2,2 x 5,6 T 7 0 pcs M 2,5 x 6,5 T 7 0 pcs M 3 x 7,2 T 9 0 pcs M 3,5 x 8,4 T 5 0 pcs. 05 The HHW colour-coding system 900N VA-steel>900N Al<0%Si Al>0%Si Cu St<520N St<750N St<900N St<00N St<200N St<400N <45HRC <55HRC <60HRC <67HRC VA-steel<900N VA-steel>900N Ti GG(G) plastics carbide/ coated coated The HHW colour-coding system enables you to see at once which tool is suitable for which material. In most sections of the catalogue, HHW provides you with additional information and data for the respective tool. The HHW colour-coding system is structured logically and in accordance with the steel key system. This means, you can choose your tools before the start of the project and therefore you will save time and money. = Sales are restricted to the packaging units mentioned in the catalogue.. a Purchase orders must be in units.

20 Solid drilling tool with reversible cutting inserts Solid drilling tool with reversible cutting inserts KUB Trigon with ABS connection ; Performance stabilising geometry thanks to special positioned cutting blades for true direction drilling. Spiral fluted, spacy chip channels allow easy chip removal. Internal coolant flow at the flutes (coolant pressure: 3-0 bar). With ABS connection, right-hand cut. With clamping screw and screwdriver, without reversible cutting inserts (see cat.-no ). For use as steady and rotating tool. Universal use in all materials. Axle-displaced drilling depending on diameter up to,5 mm. A disc drops off when drill removes. Risk of injury due to rotating effect on turning workpieces. Please use safety devices. Further types, e.g. for bore depths 2 x D, 4 x D, other diameters etc., available on request. *V = max. adjusting distance from spindle centre to bore diameter enlargement. 220 For drilling into solid material for boring depths of up to 3 x D. 22 For drilling into solid material for boring depths of up to 4 x D. HPC x D D by adjusting ABS N L Insert 220 mm max. Ø mm d Description 4,0 5, W ,0 6, W ,0 7, W ,0 8, W ,5 8, W ,0 9, W ,5 9, W ,0 20, W ,5 20, W ,0 2, W ,0 22, W ,0 23, W ,5 23, W ,0 24, W ,0 25, W ,5 25, W ,0 26, W ,0 28, W ,0 30, W ,0 3, W ,0 32, W ,5 32, W ,0 32, W ,0 33, W ,0 34, W ,0 34, W ,0 35, W ,0 36, W ,0 37, W ,0 40, W ,0 4, W ,0 42, W ,5 42, W ,0 43, W ,0 44, W ,0 45, W ,0 45, W ,0 45, W x D D by adjusting ABS N L Insert 22 mm max. Ø mm d Description 4,0 5, W ,0 6, W ,0 7, W ,0 8, W ,5 8, W ,0 9, W ,5 9, W ,0 20, W ,5 20, W ,0 2, W ,0 22, W ,0 23, W ,5 23, W ,0 24, W ,0 25, W ,5 25, W ,0 26, W ,0 28, W ,0 30, W ,0 3, W ,0 32, W ,5 32, W ,0 32, W ,0 33, W ,0 34, W ,0 34, W ,0 35, W ,0 36, W ,0 37, W ,0 40, W ,0 4, W ,0 42, W ,5 42, W ,0 43, W ,0 44, W ,0 45, W ,0 45, W ,0 45, W Performance requires quality. A-Cut recessing systems by ATORN: ATORN s high-quality turning tools..20

21 ß ; Performance stabilising geometry thanks to special positioned cutting blades for true direction drilling. Spiral fluted, spacy chip channels allow easy chip removal. Internal coolant flow at the flutes (coolant pressure: 3-0 bar). Combination shank in compliance with DIN 6535 HE (similar to 835 E) and 6595, right-hand cut. With clamping screw and screwdriver, without reversible cutting inserts (see cat.-no ). For use as steady and rotating tool. Universal use in all materials. Axle-displaced drilling depending on diameter up to,5 mm. Cutting Solid drilling tool with reversible cutting inserts KUB Trigon with combination shank A disc drops off when drill removes. Risk of injury due to rotating effect on turning workpieces. Please use safety devices. Other type, e.g. for boring depths of 2 x D, other diameters etc. available on request. 225 For drilling into solid material for boring depths of up to 3 x D. 226 For drilling into solid material for boring depths of up to 4 x D. d I HPC L N D + - 0, 3 x D D by by adjusting d x l N L inserts 225 mm max. Ø mm Description 4,0 5,0 25 x W ,0 6,0 25 x W ,0 7,0 25 x W ,0 8,0 25 x W ,5 8,5 25 x W ,0 9,0 25 x W ,5 9,5 25 x W ,0 20,0 25 x W ,5 20,0 25 x W ,0 2,0 25 x W ,0 22,0 25 x W ,0 23,0 25 x W ,5 23,5 25 x W ,0 24,0 25 x W ,0 25,0 25 x W ,5 25,5 25 x W ,0 26,0 25 x W ,0 28,0 32 x W ,0 30,0 32 x W ,0 3,0 32 x W ,0 32,0 32 x W ,0 32,5 32 x W ,0 33,5 32 x W ,0 34,0 32 x W ,0 34,0 32 x W ,0 35,0 32 x W ,0 36,0 32 x W ,0 37,0 32 x W ,0 40,0 32 x W ,0 4,0 32 x W ,0 42,0 32 x W ,0 43,0 32 x W x D D by by adjusting d x l N L inserts 226 mm max. Ø mm Description 4,0 5,0 20 x W ,0 6,0 20 x W ,0 7,0 20 x W ,0 8,0 20 x W ,0 9,0 20 x W ,0 9,5 20 x W ,0 2,0 25 x W ,0 22,0 25 x W ,0 23,0 25 x W ,0 24,0 25 x W ,0 25,0 25 x W ,5 25,5 25 x W ,0 26,0 25 x W ,0 28,0 32 x W ,0 30,0 32 x W ,0 3,0 32 x W ,0 32,0 32 x W ,0 32,5 32 x W ,0 33,5 32 x W ,0 34,0 32 x W ,0 34,0 32 x W ,0 35,0 32 x W ,0 36,0 32 x W ,0 37,0 32 x W Performance requires quality. Multiple clamps by ATORN: ATORN s high-quality clamping tools.

22 Carbide reversible cutting inserts Solid drilling tool with reversible cutting inserts ; 230 Reinforced, sintered-in double chip breaker, cutting edge bevelled and rounded. Due to the bevelling and rounding, the cutting edge is crack-resistant. 240 Reinforced, high positive chip defelection step, minimum rounded cutting edges. 245 Reinforced, high positive chip defelection step, rounded cutting edges. Carbide reversible cutting inserts for KUB Trigon P 25 M, P 40: multi-purpose use in steel materials. K 0 G: for cast iron and aluminium, highly wear-resistant. BK 62: for cast iron (GG, GGG) highly wear-resistant. BK 72: for alloyed steel, cast steel. BK 7930: solution (also suitable VA-steel). BK 8425: multi-purpose cutting tool (external and internal). K 0 A: for aluminium and non-ferrous metals, wearresistant. BK 77: for aluminium and non-ferrous metals, highly wear-resistant. BK 8425: for corrosion and acid-resistant steel and long-chipping difficult-to-machine materials P 40 K 0 G BK 62 BK 72 BK 7930 BK 8425 P 25 M Size a W pcs W pcs W pcs W pcs K 0 A BK 77 Size a W pcs W pcs W pcs W pcs. 0 BK 8425 Size 245 a W pcs. 06 W pcs. 2 W pcs. 8 W pcs. 24 Dimensions d s l e r Size mm mm W ,00 2,30 3,20 2,73 0,40 W ,35 3,8 4,0 3,48 0,40 W ,00 3,80 5,30 4,40 0,40 W ,00 3,80 6,60 5,5 0,40 d r f I S 250 ; For solid drilling tools for RCI cat.-no Spare Clamping Screws 250 for drill size Torx Plus 250 Ø mm size 4,0-9,5 M 2,0 x 4,3 6 ip 0 20,0-24,5 M 2,2 x 5,5 6 ip 02 25,0-36,0 M 2,5 x 7,2 8 ip 03 37,0-44,0 M 3,5 x 7,3 0 ip = Sales are restricted to the packaging units mentioned in the catalogue.. a Purchase orders must be in units.

23 ß 260 ; Upright and rotating use. No jamming of chips or wear of the basic body thanks to special surface treatment. Optimised coolant feed allows for an unimpeded chip removal. Point angle 74 for an almost flat bore hole bottom. With ABS connection, right-hand cut. With clamping screw and screwdriver, without reversible cutting inserts (see cat.-no. 268). Solid drilling tool with reversible cutting inserts KUB Quatron with ABS connection For difficult conditions such as slants, rolling skin or interrupted cuts. HPC Cutting x D D by adjusting ABS N L Insert 260 mm max. Ø mm d Description 4,0 4, SOEX ,0 5, SOEX ,5 6, SOEX ,0 6, SOEX ,0 7, SOEX ,5 8, SOEX ,0 8, SOEX ,5 9, SOEX ,0 9, SOEX ,5 20, SOEX ,0 20, SOEX ,5 2, SOEX ,0 2, SOEX ,0 22, SOEX 07T ,5 23, SOEX 07T ,0 23, SOEX 07T ,0 24, SOEX 07T ,5 25, SOEX 07T ,0 25, SOEX 07T ,0 26, SOEX 07T ,5 27, SOEX 07T ,0 27, SOEX 07T ,0 28, SOEX ,5 29, SOEX ,0 29, SOEX ,5 30, ,5 25 SOEX ,0 30, SOEX ,0 3, SOEX ,5 32, SOEX ,0 32, SOEX ,0 33, SOEX ,0 34, SOEX ,0 35, SOEX ,0 36, SOEX ,0 37, SOEX , SOEX ,0 38, SOEX ,0 39, SOEX ,5 40, SOEX ,0 40, SOEX ,0 4, SOEX ,0 42, SOEX ,0 43, SOEX ,0 44, SOEX Performance requires quality. Digital slide callipers by ATORN: ATORN s high-quality measuring tools.

24 Solid drilling tool with reversible cutting inserts Carbide reversible cutting inserts 265 Solid drilling tool with reversible cutting inserts KUB Quatron with combination shank ; Upright and rotating use. No jamming of chips or wear of the basic body thanks to special surface treatment. Optimised coolant feed allows for an unimpeded chip removal. Point angle 74 for an almost flat bore hole bottom. With combination shank, right-hand cut. With clamping screw and screwdriver, without reversible cutting inserts (see cat.-no. 268). For difficult conditions such as slants, rolling skin or interrupted cuts. 3 x D D by adjusting straight shank N L cutting inserts 265 mm max. Ø mm d x l mm mm Description 4,0 4,5 20 x SOEX ,0 5,5 20 x SOEX ,5 6,0 20 x SOEX ,0 6,5 20 x SOEX ,0 7,5 20 x SOEX ,5 8,0 25 x SOEX ,0 8,5 25 x SOEX ,5 9,0 25 x SOEX ,0 9,5 25 x SOEX ,5 20,0 25 x SOEX ,0 20,5 25 x SOEX ,5 2,0 25 x SOEX ,0 2,5 25 x SOEX ,0 22,5 25 x SOEX 07T ,5 23,0 25 x SOEX 07T ,0 23,5 25 x SOEX 07T ,0 24,0 32 x SOEX 07T ,5 24,5 32 x SOEX 07T ,0 25,5 32 x SOEX 07T ,0 26,5 32 x SOEX 07T ,5 27,0 32 x SOEX 07T ,0 27,5 32 x SOEX 07T ,0 28,5 32 x SOEX ,5 29,0 32 x SOEX ,0 29,5 32 x SOEX ,5 30,0 32 x 60 88,5 4 SOEX ,0 30,5 32 x SOEX ,0 3,5 32 x SOEX ,5 32,0 32 x SOEX ,0 32,5 32 x SOEX ,0 33,4 32 x SOEX ,0 34,5 32 x SOEX ,0 35,5 32 x SOEX ,0 36,5 32 x SOEX ,0 37,5 32 x SOEX ,5 38,0 32 x SOEX ,0 38,5 32 x SOEX ,0 39,5 32 x SOEX ,5 40,0 32 x SOEX ,0 40,5 32 x SOEX ,0 4,5 32 x SOEX ,0 42,5 32 x SOEX ,0 43,5 32 x SOEX ,0 44,5 32 x SOEX HPC 265. Cutting rates USB flash drive Order now! The cutting rates USB flash drive contains all relevant cutting data and will be updated regularly when it is used with a PC with an internet connection.there will also be a link to the online shop, which facilitates reordering. The flash drive provides an additional 2 GB memory space for your data. Cat.-no

25 ß 268 ; Universal use, wear-resistant reversible cutting inserts for inside and outside cutting. Sintered-in chip breaker, cutting edge rounded. Carbide-Tipped Cutting Tools with Reversible Cutting Inserts SOEX For solid drilling tool for RCI KUB Quatron see cat.- no Perfect for all roughing jobs, where an reversibility accurateness of the cutting inserts is not required. Suitable for medium and hard steel materials and grey cast iron. Cutting 268 BK BK 79 BK 8425 BK 2730 BK 770 BK 6 ISO description a SOEX pcs SOEX pcs SOEX pcs SOEX BM2 0 pcs. 0 SOEX pcs. 2 SOEX 07T pcs SOEX 07T pcs. 8 9 SOEX pcs SOEX pcs SOX pcs SOEX pcs Size d s r SOEX 05 5,56 2,38 0,4 SOEX 06 6,35 3,8 0,6 SOEX 07 7,94 3,35 0,8 SOEX 09 9,525 4,76 0,8 SOEX 2 2,7 5,6 0, Spare Clamping Screws For twist drills for reversible cutting inserts KUB Quatron cat.-no for drill Ø size Torx Plus 270 mm size 4,0-7,5 M 2,0 x 4,3 6 ip 0 8,0-2,0 M 2,2 x 5,5 6 ip 02 22,0-27,0 M 2,5 x 6,3 8 ip 03 28,0-33,0 S ip 04 34,0-44,0 S ip 05 Performance requires quality. Swivel bases by ATORN: ATORN s high-quality turning tools. = Sales are restricted to the packaging units mentioned in the catalogue.. a Purchase orders must be in units.

26 Carbide Multi-Purpose Drills Carbide-tipped masonry drills Solid impact drills Drill Mount : 400 Multi-Construction Special multi-purpose cutting edge angle. Centring geometry for exact spot drilling on hard surfaces. For operation in drilling machines and electric impact drills. Drilling in masonry, tiles (up to hardness 8 between the tiles), wood, chipboard, metals, plastics, concrete. Perfect for non-chipping, precise drilling in tiles. Carbide Multi-Purpose Drills Diamond-ground carbide blades. For most efficient drilling results, please make sure that the cutting blades are always in sharpened condition. Re-grinding of multi-purpose drills with silicium or diamond grinding wheels. 400 d l 2 l 400 4, , , L 6, d l 2 l 400 8, L 8, , , : 420 Basis ISO 5468, with straight shank, shank Ø max. 2,7 mm. Extremely robust impact drill for heavy-duty applications. Very high drilling capacity and service life thanks to hammer drilling head design. In sheet steel case. In electric impact drills. For concrete, masonry, granite, natural stone. Carbide Masonry Drill (Hammer Drill) Set Diamond-ground carbide blades, fully imbedded. 420 Ø 420 mm 7-part 4 / 5 / 6 / 8 / 0 / : Basis ISO 5468, with straight shank, shank Ø max. 2,7 mm. Extremely robust impact drill for heavy-duty applications. Very high drilling capacity and service life thanks to hammer drilling head design. In electric impact drills. For concrete, masonry, granite, natural stone. Carbide Masonry Drills (Hammer Drills) Diamond-ground carbide blades, up to Ø 4 mm fully imbedded. 425 d l 2 l 425 3, , , , , , L 6, , , , L 8, d l 2 l 425 9, , , , , , , , , ,

27 ß : spirals, S4-spiral with large capacity for bore dust for best removal performance. With SDS-plus shank (Ø 0 mm). Highest stability thanks to core reinforcement. Environmental-friendly surface treatment technology. In impact drills with SDS-Plus chuck and 2-slot chuck Hilti-TE For drilling masonry, concrete, Carbide Impact Drills SDS-plus natural and artificial stone. Ductile and sharp carbide. Starting at Ø 2 mm, with centring point for precise spot drills and guides. End-numbers. 45, 53, 6, 65 and 67 in helix design, one spiral. d l2 l Cutting 436 d l 2 l L L L L L L L L L L L L d l 2 l 436 L L L L L L L L L L L L L L L d l 2 l 436 L L L L L L L L L L L : 440 Slim 4-cutting blade drill head with x-shaped carbide cutting blade geometry. This enables the drill to quickly penetrate the hardest concrete. 2-spiral helix with large capacity for quickest bore dust removal. No jamming, no breakage when reinforcement is hit. Exact holes. Carbide Impact Drills SDS-max In impact drills with SDS-max chuck and Hilti impact drills TE For drilling concrete, masonry, natural stone. d l 2 l 440 d l 2 l L L L L : 44 Drill Mount For mounting SDS-plus drills in machines with SDS-max chuck. d l 2 l 440 L L L L d l 2 l 440 L L L Length 44 mm

28 62-62 Hammer-Proof Drill Bits for Socket Outlets : 62 Drill Bits for Socket Outlets 6 teeth, max. boring depth 55 mm, internal thread M 6 for mounting clamping shanks cat.-no. 68 and 69. Clamping shank and centre drill not included. In electric impact drills with hexagonal, in impact drills with SDS-plus/SDS-top clamping shank. For concrete and masonry. Carbide teeth in impact drill quality. Required machine performance min. 800 W. 69 Clamping stem SDS-plus shank, length 05 mm, inside thread M6. For mounting drill bits for socket outlets cat.-no. 62 and centre drill cat.-no Centre drill With clamping surface, 8 x 20 mm for clamping shanks cat.-no. 68 and Hammer-Proof Drill Bits for Socket Outlets Countersink 68 Clamping stem Length 78 mm, hexagon shank, wrench size 2, inside thread M6. 62 For mounting drill bits for socket outlets cat.-no. 62 and centre drill cat.-no. 62. Drill bit for socket outlets Shank hexagonal Shank SDS-plus Pilot drill d l mm mm Performance requires quality. Swivel bases by ATORN: This is but one example of ATORN s high-quality turning tools..28