Solid Carbide Thread Milling
|
|
|
- Ross Mitchell
- 5 years ago
- Views:
Transcription
1 Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling
2 Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page - 3 UN American (Unified) Pitch and Fine Pitch & External Thread 60º Page - 4 BSW British Standard Whitworth Thread 55º Page - 5 BSP British Standard Pipe Thread 55º (gaspipe) Page - 5 BSPT British Standard Tapered Pipe Thread 55º Page - 6 NPTF National Tapered Pipe Thread 60º (Dryseal) Page - 6 PG Panzergewinde 80º (DIN 40430) Page - 7 Technical Section - Cutting Speed Selection, Feed Page - 8
3 INFORMATION Solid Carbide Thread Milling EXECUTION OF COMBIDEX THREAD MILLING - Multi Flute Thread Mills, Flutes - Thread Mill shanks are according to DIN 834-B0 with Weldon - Flat (upon shank ø 6mm) MICRO-GRAIN CARBIDE - Manufactured of the finest Micro-Grain Carbide with grainsize smaller than µm. - TiCN-coating available ORDER EXAMPLE Thread Mill of Solid Carbide 06 : D 059: D I : E : External EI : External / ISO 60º : TMSC I -.50 ISO UN 60º : TMSC E - 4 UN Pitch BSW 55º : TMSC 659- EI - 8 BSW Norm BSP 55º : TMSC EI - 28 BSP BSPT 55º : TMSC EI - 28 BSPT NPT 60º : TMSC EI - 27 NPT NPTF 60º: TMSC EI - 27 NPTF PG 80º : TMSC EI - 8 PG
4 Ordering Code Standard Fine D D L L Height T Height T Pitch/mm ISO 60 TMSC 0300-I-0.35 ISO M TMSC 0303-I-0.40 ISO M TMSC 0305-I-0.45 ISO M TMSC 0302-I-0.50 ISO M TMSC I-0.70 ISO M TMSC I-0.75 ISO M Standard ( I ) TMSC I-0.80 ISO M TMSC I-.00 ISO M TMSC I-.25 ISO M TMSC I-.50 ISO M TMSC I-.75 ISO M TMSC 0099-I-2.00 ISO M TMSC 29-I-2.50 ISO M TMSC 659-I-3.00 ISO M TMSC 659-I-3.50 ISO M 30* TMSC 659-I-4.00 ISO M 36* TMSC 2099-I-5.00 ISO M 48* TMSC 2099-I-6.00 ISO M 64* Ordering Code Standard Fine D D L L Height T Pitch/mm ISO 60 TMSC I-0.75 ISO - M 8 - M TMSC I-.00 ISO - M 2 - M TMSC 0099-I-.50 ISO - M 4 - M TMSC 29-I-.50 ISO - M 8 - M TMSC 29-I-2.00 ISO - M 8 - M Fine Pitch ( I ) TMSC 659-I-3.00 ISO M24 M 30 - M TMSC 659-I-4.00 ISO M 36* M 36 - M TMSC 2099-I-6.00 ISO M 64* M 70 - M *.5 x M > L HARRY HERSBACH TOOLS BV 2
5 Solid Carbide Thread Mills - Mini ISO 60 Standard Fine D D L L Height T Pitch/mm Ordering code M 3 M 4 - M TMSC E-0.50 ISO M 3 M4 - M TMSC E-0.50 ISO Fine & Normal Pitch External ( E ) M 4.5 M 6 - M TMSC E-0.75 ISO M 6 M 8 - M TMSC 0099-E-.00 ISO M 0 M 2 - M TMSC 29-E-.50 ISO M 4 M 8 - M TMSC 29-E-2.00 ISO M 24 M 30 - M TMSC 659-E-3.00 ISO M 36* M 36 - M TMSC 659-E-4.00 ISO M 64* M 70 - M TMSC 2099-E-6.00 ISO UN 60 Th r e a d ( I ) UN -UNC UNF D D L L Height T TPI Ordering code - Nº TMSC 0305-I-64 UN Nº 2 Nº TMSC 0305-I-56 UN Nº 3 Nº TMSC 0305-I-48 UN Nº TMSC 0302-I-44 UN Nº 4-5 Nº TMSC 0302-I-40 UN Nº TMSC I-36 UN Nº 8 Nº TMSC I-32 UN Nº TMSC I-28 UN Nº TMSC I-24 UN 7 - / TMSC I-20 UN TMSC I-8 UN TMSC I-6 UN TMSC I-4 UN / TMSC I-3 UN 9 - / TMSC 0099-I-2 UN TMSC 0099-I- UN TMSC 29-I-0 UN TMSC 659-I-9 UN TMSC 659-I-8 UN TMSC 659-I-7 UN 3 - / TMSC 2099-I-6 UN TMSC 2099-I-5 UN TMSC 2099-I-4.5 UN 3
6 Ordering Ordering code Code Standard Standard Fine Fine D D L T Height Pitch/mm D L L Height T TPI UN 60 TMSC I-32 UN TMSC I-28 UN / TMSC 0099-I-20 UN TMSC 29-I-8 UN TMSC 29-I-6 UN TMSC 659-I-2 UN TMSC 659-I-8 UN TMSC 2099-I-6 UN Standard & Fine Pitch ( I ) Ordering code Standard Fine D D L L Height T TPI UN 60 TMSC E-32 UN Nº 6 Nº TMSC E-28 UN - Nº 2 - / TMSC 0099-E-20 UN TMSC 0099-E-8 UN TMSC 29-E-6 UN TMSC 29-E-2 UN TMSC 659-E-8 UN TMSC 2099-E-6 UN Standard & Fine Pitch External ( E ) 4 6
7 BSW 55 Standard Fine D D L L Height T TPI Ordering code 3 / TMSC 0305-EI-48 BSW TMSC 0302-EI-40 BSW External & Thread ( EI ) 5 / TMSC EI-32 BSW TMSC EI-20 BSW TMSC EI-8 BSW TMSC EI-6 BSW TMSC EI-4 BSW / TMSC EI-2 BSW TMSC 0099-EI- BSW TMSC 29-EI-0 BSW TMSC 29-EI-9 BSW TMSC 659-EI-8 BSW TMSC 659-EI-7 BSW TMSC 659-EI-6 BSW TMSC 2099-EI-5 BSW TMSC 2099-EI-4.5 BSW BSP 55 Standard Fine D D L L Height T TPI Ordering code External & Th r e a d ( EI ) TMSC EI-28 BSP TMSC EI-9 BSP / TMSC 29-EI-4 BSP TMSC 659-EI- BSP 5
8 C/2 Ordering code Standard Fine D D L L Height T 47 TPI BSPT 55 TMSC EI-28 BSPT TMSC EI-9 BSPT TMSC 29-EI-4 BSPT / TMSC 659-EI- BSPT Conical = 6 External & ( EI ) C/2 Ordering code Standard Fine D D L L Height T 47 TPI NPT 60 TMSC EI-27 NPT TMSC EI-8 NPT / TMSC 29-EI-4 NPT / TMSC 659-EI-.5 NPT TMSC 659-EI-8 NPT 2 / TMSC 2099-EI-8 NPT 2 / External & Thread ( EI ) 6
9 NPTF 60 C/2 Standard Fine D D L L Height T 47 TPI Ordering code TMSC EI-27 NPTF External & Th r e a d ( EI ) TMSC EI-8 NPTF / TMSC 29-EI-4 NPTF TMSC 659-EI-.5 NPTF 2 / TMSC 659-EI-8 NPTF 2 / TMSC 2099-EI-8 NPTF PG 80 Standard Fine D D L L Height T TPI Ordering code External & Th r e a d ( EI ) TMSC EI-20 PG TMSC 0099-EI-8 PG TMSC 29-EI-6 PG 7
10 Technical Data Material Vc (m/min) Feed/Tooth GROUP. Steel < 500 N/mm 2 - Plain Carbon - Low Carbon GROUP 2. - Carbon Steel N/mm 2 - Low alloyed Steel GROUP 3. - Alloyed Steel N/mm 2 - Tool Steel - Cast Iron < 80 HB GROUP 4. - High alloyed Steel N/mm 2 - Tool Steel - Cast Iron > 80 HB GROUP 5. - Stainless Steel Austenitic/Martensitic GROUP 6. - Heat resistant Steel Titanium Alloys - Precipitation hardening Stainless Steel GROUP 7. - High alloyed Tool Steel Nickel Base Alloys GROUP 8. - Aluminium Aluminium Alloys GROUP 9. - Non Ferrous GROUP 0. - Duroplastics Thermoplastics 8
11
12 Ordering Code Standard Fine D D L L T Height Pitch/mm HARRY HERSBACH TOOLS BV specialist in machining tools HARRY HERSBACH TOOLS BV Nieuwe Waterwegstraat 5 35 HE Schiedam info@hhtools.nl 2
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
MINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
New Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
DRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
Rotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
Solid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-03 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Our products are sold through distributors
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-08 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
PRECISION THREADING TECHNOLOGY
PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
TAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
NHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
Drills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
hole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
QuadCut. External. For Thread Turning
QuadCut External For Thread Turning Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
Meticulous attention to detail combined with a wealth of experience from our people. Perfection. Innovation. Competence. Partnership.
PRODUCT CATALOGUE Meticulous attention to detail combined with a wealth of experience from our people. Perfection. Innovation. Competence. Partnership. 2 3 OUR CARBIDE GRADES AF K10 UF AF K20 CF AF K34
ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
For Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
Imperial thread inserts for metals
0101/12.02 American National Coarse Thread American National Fine Thread British Standard Whitworth Thread British Standard Fine Thread British Standard Pipe Thread ISO 228/1 Pipe Thread British Association
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
MGF Thread Milling Tools
MGF Thread Milling Tools Chamfering and hread milling righ from M2 Spiral flued solid carbide ools wih profile correcion and rear chamfer. Diameer range 2-20 mm This offers he following main advanages
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
NVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
PRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
Drilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
Product Catalogue 835. Smart Solutions on the Cutting Edge
Product Catalogue 835 Smart Solutions on the Cutting Edge 1 2 The World of WhizCut Smart Solutions on the Cutting Edge Demand on production for small parts around the world is continuously increasing.
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
Carbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
MFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
M.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
Lubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
CUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
BELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
INDEX. Wolferal Saw & Tool Selection Manual The Jones Tool Co Ltd Introduction. Our 58th YEAR
Wolferal Saw & Tool Selection Manual 2007 INDEX Our 58th YEAR Characteristics of Cutting Steels and Saw Tooth Forms 2-3 Wolferal Premium Quality Cutting-Off Saw Blades 4-14 Wolferal Cutting Performance
B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,