"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
|
|
- Henry Griffin
- 5 years ago
- Views:
Transcription
1 "IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC SIZE Manufactured from micrograin carbide with 10% cobalt. The 4-flute design increases core thickness and tool strength which reduces tool deflection and increases size accuracy. The reduced chip load provides improved surface finishes. Recommended for use on cast iron, tool steel, stainless steel & PH Series. Item No. Code Cutter Shank Flute Overall Price No. Dia. Dia. Length Length (pc) XL XL XL XL XL XL XL XL XL RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-2 "IMCO" SOLID CARBIDE END MILLS 2 FLUTE SQUARE END, METRIC SIZE Manufactured from micrograin carbide with 10% cobalt. The 2-flute design gives more flute volume which reduces flute packing at higher feed rates. Recommended for milling cast iron, non-ferrous metals, low alloyed steels, plastics and other easily machined materials. Item No. Code Cutter Shank Flute Overall Price No. Dia. Dia. Length Length (pc)
2 "IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix NO. S 97-3 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE BALL END, METRIC SIZE Manufactured from micrograin carbide with 10% cobalt. The 4-flute design increases core thickness and tool strength which reduces tool deflection and increases size accuracy. The reduced chip load provides improved surface finishes. Recommended for use on cast iron, tool steel, stainless steel & PH Series. Slotting Profile Milling Pocket (Ball) (Ball) Cavity Item No. Code Cutter Shank Flute Overall Price No. Dia. Dia. Length Length (pc) From roughing to finishing in Harden Tool Steels Heat-treated Steels Hastalloy-C Stainless Steels (15-5, 17-4, 440C) Waspalloy Rene-41 Titanium Inconel Monel NO. S 97-4 "IMCO" TITANIUM ALUMINUM NITRIDE (TiALN) COATED SOLID CARBIDE END MILLS 6 FLUTE WITH CORNER RADIUS (OMEGA-6), METRIC SIZE Manufactured from micrograin carbide with TiAIN coating. Ideal for cutting surfaces from roughing to finishing in hardened tool steels, stainless steel, titanium, inconel and monel. Item No. Code Cutter Shank Flute Overall Corner Price No. Dia. Dia. Length Length Radius (pc) (mm) Slotting (Corner Radius) Side Milling (Shoulder with Corner Radius) 274
3 BURR SELECTION GUIDE Standard cut has right-hand spiral flutes only and is intended for general purpose use on cast iron, steel, copper alloys, brass alloys and other ferrous materials. Right and left-hand flutes combine to produce a chisel type cutting edge. The chisel edge permits faster penetration and stock removal. NO. S 98-1 "IMCO" CARBIDE BURRS - CYLINDER SHAPE PLAIN END (SA) Cylinder Shape - Plain End (SA Series) SA SA-42M SA SA-43M SA SA-52M SA SA-51M SA SA-1M SA SA-2M SA SA-3M SA SA-4M SA SA-5M SA SA-6M SA SA-7M SA SA-9M D3025SA SA-42M D303SA SA-43M D304SA SA-52M D3063SA SA-51M D606SA SA-1M D608SA SA-2M D6095SA SA-3M D6127SA SA-5M D616SA SA-6M D619SA SA-7M D6254SA SA-9M Cylinder Shape - End Cut (SB Series) NO. S 98-2 "IMCO" CARBIDE BURRS - CYLINDER SHAPE END CUT (SB) SB SB-43M SB SB-51M SB SB-1M SB SB-2M SB SB-3M SB SB-5M SB SB-6M D303SB SB-43M D3063SB SB-51M D606SB SB-1M D608SB SB-2M D6095SB SB-3M D6127SB SB-5M D616SB SB-6M
4 NO. S 98-3 "IMCO" CARBIDE BURRS - CYLINDER SHAPE RADIUS END (SC) Cylinder Shape - Radius End (SC Series) SC SC-42M SC SC-51M SC SC-1M SC SC-2M SC SC-3M SC SC-5M SC SC-6M D303SC SC-42M D3063SC SC-51M D606SC SC-1M D608SC SC-2M D6095SC SC-3M D6127SC SC-5M D616SC SC-6M (inch) (inch) (inch) (inch) F606SC SC-1A /4 1/ FD606SC SC-1AM /4 1/4 1 2 NO. S 98-4 "IMCO" CARBIDE BURRS - BALL SHAPE (SD) Ball Shape (SD Series) d2 d1 l2 l SD SD-42M SD SD-53M SD SD-51M SD SD-1M SD SD-2M SD SD-3M SD SD-5M SD SD-6M D303SD SD-42M D3047SD SD-53M D3063SD SD-51M D606SD SD-1M D608SD SD-2M D6095SD SD-3M D6127SD SD-5M D616SD SD-6M
5 NO. S 98-5 "IMCO" CARBIDE BURRS - OVAL SHAPE (SE) SE SE-41M SE SE-51M SE SE-1M SE SE-3M SE SE-5M SE SE-6M Oval Shape (SE Series) D303SE SE-41M D3063SE SE-51M D606SE SE-1M D6095SE SE-3M D6127SE SE-5M D616SE SE-6M NO. S 98-6 "IMCO" CARBIDE BURRS - TREE SHAPE RADIUS END (SF) Tree Shape - Radius End (SF Series) SF SF-42M SF SF-51M SF SF-1M SF SF-3M SF SF-5M SF SF-6M D303SF SF-42M D3063SF SF-51M D606SF SF-1M D6095SF SF-3M D6127SF SF-5M D616SF SF-6M
6 NO. S 98-7 "IMCO" CARBIDE BURRS - TREE SHAPE POINTED END (SG) SG SG-44M SG SG-51M SG SG-1M SG SG-2M SG SG-3M SG SG-5M SG SG-6M Tree Shape - Pointed End (SG Series) D303SG SG-44M D3063SG SG-51M D606SG SG-1M D608SG SG-2M D6095SG SG-3M D6127SG SG-5M D616SG SG-6M NO. S 98-8 "IMCO" CARBIDE BURRS - FLAME SHAPE (SH) Flame Shape (SH Series) SH SH-41M SH SH-53M SH SH-2M SH SH-5M D606SH SH-1M D608SH SH-2M D6127SH SH-5M NO. S 98-9 "IMCO" CARBIDE BURRS - 60 CONE SHAPE (SJ) SJ SJ-1M * SJ SJ-3M SJ SJ-5M Cone Shape (SJ Series) * double end D606SJ SJ-1M * D6095SJ SJ-3M D6127SJ SJ-5M
7 NO. S "IMCO" CARBIDE BURRS - 90 CONE SHAPE (SK) SK SK-1M * SK SK-3M SK SK-5M Cone Shape (SK Series) * double end D606SK SK-1M * D6095SK SK-3M D6127SK SK-5M * comes in double end NO. S "IMCO" CARBIDE BURRS - TAPER SHAPE RADIUS END (SL) Item No. Model Code Shank Cutter Cutter Overall Included Price No. No. Dia. Dia. Length Length Angle (pc) SL SL-42M SL SL-1M SL SL-2M SL SL-3M SL SL-4M & 14 Taper Shape - Radius End (SL Series) D303SL SL-42M D606SL SL-1M D608SL SL-2M D6095SL SL-3M D6127SL SL-4M NO. S "IMCO" CARBIDE BURRS - CONE SHAPE (SM) Item No. Model Code Shank Cutter Cutter Overall Included Price No. No. Dia. Dia. Length Length Angle (pc) SM SM-42M SM SM-51M SM SM-2M SM SM-4M SM SM-5M & 28 Cone Shape (SM Series) D303SM SM-42M D3063SM SM-51M D606SM SM-2M D6095SM SM-4M D6127SM SM-5M
Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
More informationAUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.morrisflex.co.uk Introduction groupuk Morrisflex is an internationally renowned brand of high quality carbide burrs and forms a key part of ATA Group, a privately owned
More informationCUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32
JOBBER LENGTH NITRO DRILL BITS 135 SPLIT POINT MADE IN USA 10601 1/16 10623 13/32 10602 5/64 10624 27/64 10603 3/32 10625 10604 7/64 10626 29/64 10605 1/8 10627 15/32 10606 9/64 10628 31/64 10607 5/32
More informationCarbide Burrs. Welcome CUTTING TOOLS. Integrity Industrial Supply Ltd. Dear Customer,
Welcome DOUBLE & SINGLE T5S CUT 2H5 1/4 Shank Dear Customer, Integrity Industrial offers Canada s Finest, with the best individual packaging available. Our burrs are balanced with the finest carbide available
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCARBIDE ROTARY BURRS
YE-RT10 CARBIDE ROTARY BURRS FRÄSSTIFTE AUS HARTMETALL - For removal sharp corners, Burrs and fins etc. - Micro grain carbide, Form A, B, C, D, E, F, G, H, J, K, L, M, N with YG-1 Unique design technology,
More informationCARBIDE ROTARY BURRS
Being the best through innovation F R Ä S S T I F T E A U S H A R T M E T A L L - For General Steels and Non-ferrous Metals etc. (mm & mm Shank Diameter) - Für normale Stähle und Nichteisenmetalle usw.
More informationCarbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More information2007 Product Catalog
2007 Product Catalog Get your money s worth and more. Power. Precision. Performance. Everything you need to make your operation more efficient, more productive and more profitable. It s all there, in every
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationALWAYS A WINNING HAND
ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationCOATING SELECTION CHART
On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationSIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationSelf Contained Dual Shaft Body Less Valve Gate Nozzle System, Single Application
DSB-500 Self Contained Dual Shaft Body Less Valve Gate Nozzle System, Single Application NOZZLE DESCRIPTION: The "DSB-500 Nozzle Assembly is furnished with a heated radius cap and locating ring (Ø3.990)
More informationALL TERRAIN CRANE AR-5500M
ALL TERRAIN CRANE AR AR-5500M (ESP Boom and Fully Automatic Luffiing Jib) JAPANESE SPECIFICATIONS These specifications are for the optional ESP boom and fully automatic luffing jib for the AR-5500M type
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationMASTER CATALOG SOLID END MILL PORTFOLIO.
MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationIndustrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationFine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationTOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationNVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationSAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationRotary Cutting Tools Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools 200 Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. TABLE OF CONTENTS CATEGORY PAGE # Endmill Data 2 Terms & Conditions 3 Materials Index 3 Milling Procedures
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationRotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationYour guide to the right drill bit
Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool
More informationH T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2
More informationBody Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationSolid End Milling High-Performance Solid Carbide End Mills
Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationThe HSS drill bit range
Bosch Metal Drilling The HSS drill bit range www.bosch-professional.co.uk HSS Drill Bits range overview HSS PointTeQ HSS Ground HSS Impact HSS Cobalt Lifetime Speed Precision Features Fast Drilling in
More informationCONTINUOUS IMPROVEMENT IN QUALITY AND SERVICE SINCE 1942
CONTINUOUS IMPROVEMENT IN QUALITY AND SERVICE SINCE 1942 For over 65 years Fullerton Tool Company has built a reputation of exceptional quality and service in the manufacturing of advanced performance
More informationSECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS
SECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS 335.25 DISC MILLING CUTTER Seco continues to meet and exceed customer demand with the addition of two new insert
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationNVS The new standard in universal machining. passion for precision
NVS The new standard in universal machining passion for precision NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard in universal
More informationMilling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
More informationRotary Cutting Tools. Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. Table of Contents Category Page # Terms & Conditions 3 Coatings 3 Endmills: 4 32 Endmill Data 4 5 Endmills
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationCarbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationHigh-performance milling cutter NX-NVD NEW
High-performance milling cutter NX-NVD NEW Universal high performance with a double groove and variable helix [ 2 ] The NX-NVD high-performance milling cutter with patented double groove geometry and variable
More informationDrills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationTAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More information