BELL, SCOTT & CO. LTD.
|
|
|
- Magnus Foster
- 6 years ago
- Views:
Transcription
1 Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable for drilling of materials that are difficult to drill and for highest loading. Applications: for steel and alloyed cast steel over 900 N/² strength, grey cast, malleable cast, high-alloyed chromium steel such as stainless and acid resistant steel Point cut: helical point Helix angle: 20-30º Packing unit: from Ø 3.0 Ø 1.0 up to 10.2 in plastic box of 10 with split point Surface: golden brown Ø 10.5 up to 16.0 in plastic box of 5 DIN 1412 C Point angle: 130º R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 1
2 Twist drills DIN 338 type N HSS ground, with split point Highly efficient standard drill suitable for all usual drilling work in all normal materials. High rotational precision. Point cut: helical point Helix angle: 20-30º Packing unit: from Ø 3.0 Ø 0.30 up to in plastic box of 10 with split point Surface: bright Ø 10.5 up to 16.0 in plastic box of 5 DIN 1412 C Point angle: 118º R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 2
3 Twist drills DIN 338 type N HSS ground, with split point Highly efficient standard drill suitable for all usual drilling work in all normal materials. High rotational precision. Point cut: helical point Helix angle: 20-30º Packing unit: from Ø 3.0 Ø 0.30 up to in plastic box of 10 with split point Surface: bright Ø 10.5 up to 16.0 in plastic box of 5 DIN 1412 C Point angle: 118º R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Jobber type N HSS ground, with split point in fractional sizes Point cut: helical point from Ø 1/8 inch with split point DIN 1412 C Highly efficient standard drill suitable for all usual drilling work in all normal Point angle: 118 materials. High rotational precision. Helix angle: Surface: bright Applications: for steel and cast-steel alloyed and unalloyed up to 800 N/² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass. Ø in inch 3/32 2 1/4 1 1/4 R /64 3 7/8 2 5/8 R /64 2 5/8 1 1/2 R / /4 R /8 2 3/4 1 5/8 R /16 4 1/2 3 3/16 R /64 3 1/8 2 R /32 4 3/4 3 7/16 R /64 3 1/4 2 1/8 R / /8 R /16 3 1/2 2 5/16 R /32 5 1/4 3 7/8 R May 2007 Page 3
4 Twist drills DIN 338 type N HSS rolled Highly efficient standard drill suitable for all usual drilling work in all normal materials. High security against fracture. Point cut: helical point Packing unit: Ø 0.30 up to in plastic box of 10 Point angle: 118º Ø 10.5 up to 16.0 in plastic box of 5 Helix angle: 20-30º Ø 16.5 up to 16.0 in plastic box of 1 Surface: black, vacuum, metalized R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 4
5 Twist drills DIN 338 type N HSS rolled Highly efficient standard drill suitable for all usual drilling work in all normal materials. High security against fracture. Point cut: helical point Packing unit: Ø 0.30 up to in plastic box of 10 Point angle: 118º Ø 10.5 up to 16.0 in plastic box of 5 Helix angle: 20-30º Ø 16.5 up to 16.0 in plastic box of 1 Surface: black, vacuum, metalized R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 5
6 Twist drills DIN 338 type N HSS rolled Highly efficient standard drill suitable for all usual drilling work in all normal materials. High security against fracture. Point cut: helical point Point angle: 118º Packing unit: in plastic Packing bags Unit: in plastic bags Helix angle: 20-30º Surface: black, vacuum metalized Total Flute Total Flute Cont. pcs Cont. pcs R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Twist drills DIN 338 type N HSS rolled with reduced shank Highly efficient standard drill suitable for all usual drilling work in all normal materials. High security against fracture. Ideally suitable for drilling largish drilling diameters on all coonly used drilling machines with a clamping chuck up to 13. Point cut: helical point Point angle: 118º Packing Unit: in plastic bags Helix angle: 20-30º Further sizes available on request Surface: black, vacuum metalized Total Shank Total Shank Shank Ø Cont. Shank Ø Cont. pcs pcs R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 6
7 Twist drills DIN 1897 type N HSS rolled - short Short and stable standard drill, ideally suitable for assembly work in thin-walled materials such as sheet steels, flat steels and profile steels. High security against fracture. For use in all hand held drilling machines. Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short chipping aluminium alloys, bronze and brass. Point cut: helical point Packing unit: Point angle: 118º Ø 0.20 up to 10.0 in plastic box of 10 Helix angle: 20-30º Surface: black, vacuum metalized R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Centre drills DIN 333 A HSS Applications: for making centre holes according to DIN 332, Shape A Centre angle: 60 Packing unit: Point angle 120 Ø 1.0 up to 6.5 Ø tolerance: h9 in individual plastic pack Total Shank Ø Total Shank Ø R R R R R R R R May 2007 Page 7
8 Spot drills HSS ground, extra short, with split point Extra short and stable standard drill. Shorter than DIN Ideally suitable for assembly work in thin-walled materials such as sheet steels, flat steels and profile steels. High security against fracture. For use in all hand-held drilling machines. Advantages DIN 1412 C: good centring, little pressure required. Chip distribution improves chip removal. Applications: for steel and cast steel alloyed and unalloyed up to approx 900 N/² strength, grey cast, malleable cast iron, die-cast metal, Point cut: helical point Surface: bright Packing unit: from Ø 3.0 with split point DIN 1412C Point angle: 135º Ø 2.50 up to 6.50 in plastic box of R R R R R R R R R R R R R R R R R R R R R R R Twist drills DIN 1869 TL 3000 HSS ground, extra long, with split point Stable special drill. Ideally suitable for deep holes under difficult conditions, e.g. work for bad chipping materials. Suitable for all usual drilling work in all normal materials. High rotational precision. For drilling dep holes please use small feed and deaerate chips often. Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/² strength, grey cast, malleable cast iron, die-cast metal, Point cut: helical point Surface: bright/black from Ø 3.0 with split point DIN 1412C Packing unit: in plastic bags of 1 Point angle: 130º Helix angle: 40º R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 8
9 Twist drills DIN 340 type N HSS ground Highly efficient standard drillin long version. Suitable for deep hole drillings in all normal materials. High security against fracture. For deep hole drillings small forward feeds and frequent chip removal are necessary. Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass. Point cut: helical point Surface: bright Packing unit: Point angle: 118º Ø 2.5 up to 10.0 in plastic box of 10 Helix angle: 20-30º Ø 10.5 up to 13.0 in plastic box of R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R May 2007 Page 9
10 Twist drills DIN 345 type N HSS Highly efficient standard drill with morse taper usable for all drilling work in all normal materials. High security against fracture. Point cut: helical with split point Surface: bright/ground Point angle: 118º Packing Unit: in plastic tubes of 1 Helix angle: 20-30º Total Flute Morse taper no R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Total Flute Morse taper no. May 2007 Page 10
11 Twist drill sets in bench stand Description Consisting of 91 twist drills DIN 338 type N HSS rolled Ø 1.0 up to 10.0 in increments of 0.1 R Consisting of 91 twist drills DIN338 type N HSS ground Ø 1.0 up to 10.0 in increments of 0.1 R Consisting of 91 twist drills DIN 338 type N HSS Co5 ground Ø 1.0 up to 10.0 in increments of 0.1 R Twist drill sets in bench stand Description Consisting of 170 twist drills DIN 338 type N HSS ground 10 pcs Ø in increments of pcs Ø in increments of 0.5 R Consisting of 170 twist drills DIN 338 type N HSS Co 5 ground 10 pcs Ø in increments of 0.5 5pcs Ø in increments of 0.5 R Drill cabinet Description Drill cabinet empty 1-13 x L Drill cabinet empty 1-13 x 0.5 Drill cabinet consisting of 645 twist drills DIN 338 type N HSS rolled contents list see below Drill cabinet consisting of 645 twist drills DIN 338 type N HSS ground contents list see below Drill cabinet consisting of 645 twist drills DIN 338 type N HSS Co5 ground contents list see below L Contents List x pcs x pcs x pcs x pcs x pcs 1.0 x x x x x x x x x x x x x x x x x x x x x x x x x 10 May 2007 Page 11
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
Solid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
Drills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
Drills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
Cutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
Drills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
hole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
Drilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
The HSS drill bit range
Bosch Metal Drilling The HSS drill bit range www.bosch-professional.co.uk HSS Drill Bits range overview HSS PointTeQ HSS Ground HSS Impact HSS Cobalt Lifetime Speed Precision Features Fast Drilling in
121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Rotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
TWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
Standard program. Drilling tools. ...convincing solutions. Measuring tools, Cutting blades
Standard program Drilling tools Measuring tools, Cutting blades...convincing solutions Twist drills Twist drills DIN 338/HSS type N point angle 118, spiral angle 25-35, Ø-tolerance h 8, of HSS, for drilling
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
Compatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
Special drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
Drilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
Cut cooler, faster and longer. only the best
Cut cooler, faster and longer only the best To drill more holes faster! Innovation is part of our daily activity and as a result most of our drill bits present unique features and benefits that will help
METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
Locks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Handwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
P: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
TAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
MHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
TABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
PRECISION THREADING TECHNOLOGY
PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
Standard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.
The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER
GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
Selection guide for drills
CAT_BOSCH_2011-02_EN_bosch_production-tools_catalogus_Pneumatic-Tools-for-Industry_Boormachines pagina 1 van 9 6 Drills and rotary hammer Air Tools for Industry Selection guide for drills Choosing a drill
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
Compatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
COOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
GFS - Backspotfacing System RSQ for small-lot production
GFS - for small-lot production The GFS back spotfacing system, type RSQ, is a heavy-duty, simple tool with rapid payback and extremely inexpensive owing to the interchangeability of the proven GFS cutters
PRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
Your guide to the right drill bit
Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES 02 10 SMOOTHING BROACHES 02 13 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires,
Glass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
For Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
Air vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
Taper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
Unit 3 Lesson 2 Electric Current. Copyright Houghton Mifflin Harcourt Publishing Company
Current Events What is an electric current? Electrical energy is the energy of electric charges. In most devices that use electrical energy, the electric charges flow through wires. The rate of flow of
NHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
Milling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -