2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
|
|
- Johnathan Reed
- 6 years ago
- Views:
Transcription
1 Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels Cast Iron Aluminum Alloys ~ 55HRC ~ 0HRC ~ 70HRC Grhite Copper Plastics Glass Filled Plastics Titanium Alloys Heat Resistant Alloys Cemented Carbide Hard Brittle (Non-Metallic) Materials Features Recommend deep rib milling using an under cut design. The shank ter angle shown is not an exact value and to avoid contact with the work piece, we recommend the user controls the precise value of this angle. Shank ter angle should not make contact with the work piece. Inclined Angle Actual Effective Length 10 Total 138 models Unit Outside Effective Length Neck Shank Ter Overall Shank Price Effective Length by Inclined Angles Diameter Length of Cut Diameter Angle Length Diameter ( ) φd l 1 l φd 1 Bta L φd 30' ' 3 C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , Next Page
2 Flutes Unit Outside Effective Length Neck Shank Ter Overall Shank Price Effective Length by Inclined Angles Diameter Length of Cut Diameter Angle Length Diameter ( ) φd l 1 l φd 1 Bta L φd 30' ' 3 C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference Next Page 11
3 Flutes UTCOAT 1 Unit Outside Effective Length Neck Shank Ter Overall Shank Price Effective Length by Inclined Angles Diameter Length of Cut Diameter Angle Length Diameter ( ) φd l 1 l φd 1 Bta L φd 30' ' 3 C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference C-CER , No Interference No Interference Next Page
4 Flutes Unit Outside Effective Length Neck Shank Ter Overall Shank Price Effective Length by Inclined Angles Diameter Length of Cut Diameter Angle Length Diameter ( ) φd l 1 l φd 1 Bta L φd 30' ' 3 C-CER , C-CER , C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference C-CER , C-CER , No Interference C-CER , No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference No Interference C-CER , No Interference No Interference No Interference No Interference C-CER , No Interference No Interference No Interference No Interference C-CER , No Interference No Interference No Interference No Interference C-CER , No Interference No Interference No Interference No Interference C-CER ,000 No Interference No Interference No Interference No Interference No Interference C-CER ,40 No Interference No Interference No Interference No Interference No Interference C-CER ,90 No Interference No Interference No Interference No Interference No Interference C-CER ,800 No Interference No Interference No Interference No Interference No Interference C-CER ,440 No Interference No Interference No Interference No Interference No Interference 13
5 Flutes UTCOAT (~5HB) (5~35HB) PRE SKD11 / 1 / SKT Velocity Vc=50~5m/min Vc=50~5m/min Vc=40~55m/min Vc=30~50m/min Vc=30~40m/min Outside Effective Diameter Length , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.01 5, ~ , ~ , ~ , ~ , ~0.01 4, ~ , ~ , ~0.007, ~0.00 4, ~ , ~ , ~ , ~ , ~ , ~ , ~0.00 4,000 1, ~0.03 4, ~ , ~0.07 3, ~0.01 1, ~ , ~ , ~ , ~0.01 7, ~0.01 0, ~ , ~ , ~0.009, ~ , ~0.00 0, ~ , ~ , ~ , ~ , ~0.00 1, ~ , ~ , ~ , ~ , ~ , ~ ,000 1, ~ , ~ , ~ , ~ , ~ ,000 1, ~ , ~ , ~ , ~0.0 18, ~ , ~ , ~0.0 9, ~ , ~ , ~0.01 7, ~ , ~0.011, ~ , ~ , ~ , ~0.011, ~ , ~ , ~0.00 1, ~ , ~ , ~ , ~ , ~ , ~ ,000 1, ~ , ~ , ~0.04 4, ~ , ~0.0 31, ~ , ~0.03 5, ~0.0 0, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.01 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~
6 Flutes (~5HB) (5~35HB) PRE SKD11 / 1 / SKT Velocity Vc=50~5m/min Vc=50~5m/min Vc=40~55m/min Vc=30~50m/min Vc=30~40m/min Outside Effective Diameter Length ,000 1, ~ , ~0.048, ~ , ~ , ~0.04 7, ~0.09 7, ~0.04, ~0.0 18, ~ , ~ , ~0.01 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ ,000 1, ~0.00 8, ~0.05 3, ~ , ~ , ~0.05 4, ~ , ~0.05 0, ~0.03 1, ~ , ~ , ~ , ~0.05 0, ~0.03 1, ~ , ~ , ~ , ~ , ~0.01 1, ~ , ~ , ~ , ~ , ~0.01 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.00 8, ~ , ~ , ~ ,000 1, ~0.07 3, ~0.0 0, ~ , ~ , ~ , ~0.03 0, ~0.03 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.00 9, ~ , ~ ,000 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.05 8, ~ , ~ , ~ , ~ , ~0.05 8, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ ,000 1, ~ , ~ , ~0.08 1, ~0.05 8, ~ , ~0.04 1, ~ , ~ , ~0.0 8, ~ , ~0.04 1, ~ , ~ , ~0.0 8, ~ , ~0.04 1, ~ , ~ , ~0.0 8, ~ , ~0.05 1, ~ , ~ , ~ , ~ , ~0.0 10, ~ , ~0.01 8, ~0.01 7, ~ , ~0.0 10, ~ , ~0.01 8, ~0.01 7, ~ , ~ , ~ , ~ , ~0.00, ~
7 Flutes UTCOAT (~5HB) (5~35HB) PRE SKD11 / 1 / SKT Velocity Vc=50~5m/min Vc=50~5m/min Vc=40~55m/min Vc=30~50m/min Vc=30~40m/min Outside Effective Diameter Length 17,000 1, ~ , ~ , ~ , ~0.05 7, ~ ,000 1, ~ , ~ , ~ , ~0.05 7, ~ , ~ , ~0.04 1, ~ , ~0.08 7, ~ , ~ , ~0.04 1, ~ , ~0.08 7, ~ , ~0.0 11, ~0.0 9, ~0.0 7, ~ , ~ , ~0.0 11, ~0.0 9, ~0.0 7, ~ , ~ , ~0.03 9, ~ , ~ , ~ , ~ , ~0.03 9, ~ , ~ , ~ , ~ , ~ , ~ , ~0.008, ~0.00, ~ ,000 1, ~ , ~ , ~ , ~ , ~ ,000 1, ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~0.03, ~ , ~ , ~ , ~ , ~0.03, ~ , ~ , ~ , ~ , ~0.03, ~ , ~ , ~0.05 8, ~0.0 7, ~0.017, ~ , ~ , ~0.05 8, ~0.0 7, ~0.017, ~ , ~0.04 8, ~0.0 7, ~0.018, ~0.014, ~ , ~0.01 7, ~0.01, ~0.009, ~ , ~ ,000 1, ~ , ~ , ~ , ~0.08, ~ ,000 1, ~ , ~ , ~ , ~0.01, ~ ,000 1, ~ , ~ , ~ , ~0.01, ~ , ~ , ~ , ~0.04 8, ~0.031, ~ , ~ , ~ , ~0.04 8, ~0.031, ~ , ~ , ~ , ~0.04 8, ~0.031, ~ , ~0.09 9, ~0.04 7, ~0.0, ~0.017, ~ , ~0.09 9, ~0.04 7, ~0.0, ~0.017, ~ , ~0.05 7, ~0.01, ~0.018, ~ , ~ , ~0.01 7, ~0.01 5, ~ , ~ , ~
8 Flutes (~5HB) (5~35HB) PRE SKD11 / 1 / SKT Velocity Vc=50~5m/min Vc=50~5m/min Vc=40~55m/min Vc=30~50m/min Vc=30~40m/min Outside Effective Diameter Length 8 10,800 1, ~ ,800 1,10 0.0~0.11 9, ~ , ~ , ~ ,800 1, ~ ,800 1,10 0.0~0.11 9, ~ , ~ , ~ ,800 1, ~ ,800 1,10 0.0~0.11 9, ~ , ~ , ~ ,500 1, ~0.07 9, ~0.05 8, ~0.05, ~ , ~ ,500 1, ~0.07 9, ~0.05 8, ~0.05, ~ , ~ ,500 1, ~0.07 9, ~0.05 8, ~0.05, ~ , ~ ,500 1, ~0.07 9, ~0.05 8, ~0.05, ~ , ~ , ~0.03 7, ~0.03, ~0.07 5, ~0.01 4, ~ , ~0.09, ~0.04 5, ~0.0 4, ~ , ~ ,700 1, ~0.17 8,700 1, ~ , ~0.13 5, ~0.09 4, ~ ,700 1, ~ ,700 1, ~0.13 7, ~ , ~0.09 4, ~ ,700 1, ~ ,700 1, ~0.13 7, ~ , ~0.09 4, ~ ,700 1, ~ ,700 1, ~0.13 7, ~ , ~0.09 4, ~ ,00 1, ~ , ~0.07, ~0.0 5, ~ , ~ ,00 1, ~ , ~0.07, ~0.0 5, ~ , ~ ,00 1, ~ , ~0.07, ~0.0 5, ~ , ~ , ~0.043, ~0.03 5, ~ , ~0.05 3, ~ , ~0.043, ~0.03 5, ~ , ~0.05 3, ~ , ~ , ~0.09 4, ~0.0 4, ~0.0 3, ~ , ~ , ~0.01 3, ~0.01 3, ~ , ~ ,100 1, ~ ,100 1, ~0.154, ~ , ~ , ~ ,100 1, ~ ,100 1, ~0.154, ~ , ~ , ~ ,100 1, ~ ,100 1, ~0.154, ~ , ~ , ~ , ~0.08, ~0.07 5, ~0.05 4, ~0.05 3, ~0.03 5, ~0.08, ~0.07 5, ~0.05 4, ~0.05 3, ~ , ~ , ~0.04 4, ~ , ~0.03 3, ~ , ~ , ~0.04 4, ~ , ~0.03 3, ~
9 Flutes UTCOAT (~5HB) (5~35HB) PRE SKD11 / 1 / SKT Velocity Vc=50~5m/min Vc=50~5m/min Vc=40~55m/min Vc=30~50m/min Vc=30~40m/min Outside Effective Diameter Length 1,000 1, ~0.0, ~0.18 5, ~ , ~0.117, ~ ,000 1, ~0.181, ~ , ~0.13 3, ~0.105, ~ ,000 1, ~0.181, ~ , ~0.13 3, ~0.105, ~ , ~ , ~0.07 4, ~0.09 3, ~0.053, ~ , ~ , ~0.07 4, ~0.09 3, ~0.053, ~ , ~ , ~0.04 3, ~0.037, ~0.09, ~ , ~ , ~0.04 3, ~0.037, ~0.09, ~ , ~ , ~0.031, ~0.08, ~0.01, ~ , ~ , ~0.031, ~0.08, ~0.01, ~ , ~0.7 4, ~ , ~0.17, ~0.13 1, ~ , ~0.7 4, ~ , ~0.17, ~0.13 1, ~ , ~0.7 4, ~ , ~0.17, ~0.13 1, ~ , ~ , ~0.09 3, ~0.08, ~0.07 1, ~ , ~ , ~0.09 3, ~0.08, ~0.07 1, ~ , ~ , ~0.09 3, ~0.08, ~0.03 1, ~ , ~0.0, ~0.05, ~ , ~0.03 1, ~ , ~0.7 3, ~0.189, ~0.17, ~0.13 1, ~ , ~0.7 3, ~0.189, ~0.17, ~0.13 1, ~ , ~0.115, ~0.09, ~0.08 1, ~0.07 1, ~ , ~0.0, ~0.05 1, ~ , ~0.03 1, ~0.0 0, ~0.0, ~0.05 1, ~ , ~0.03 1, ~0.0 Slotting D :Outside Diamater : Note: Decrease both spindle speed and feed rate proportionally when the milling parameters exceed the machine's maximum spindle speed. Recommend water soluble or oil coolant. Recommend oil coolant for Titanium Alloys and Heat Resistant Alloys. 18
SAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationTOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationEZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationMACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction
No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationCoated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationProduct Catalog. GREENTOOL Co.,Ltd. Carbide End Mill GT Series. Flute shape corresponding to work Materials!! Coating excellent in durability!!
GREENTOOL Co.,Ltd. Product Catalog Carbide End Mill GT Series Point 1 Point 2 Point 3 Flute shape corresponding to work Materials!! Coating excellent in durability!! Possible change order of specification!!
More informationNo: LPD 12mm~ 13.5mm SPD 13mm~ 22mm NPD 23mm~ 60mm NPD Cartridge 61mm~ 100mm. Through Coolant System
No: 160-6 Features Excellent chip evacuation due to the specially designed flute - Special surface treatment of shank provides long durability - 4 cutting-edge using economical geometry of insert - Various
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationMASTER CATALOG SOLID END MILL PORTFOLIO.
MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationDrills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationThreading Inserts Identification System
THEADING Turning Tools Threading Inserts Identification ystem 16 E 1.50 IO - TC 1 2 3 4 5 6 1 Insert ize 2 Thread tyle 3 Hand of Insert L (mm) E=External =ight 11 6.35 I=Internal L=Left 16 9.525 22 12.7
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationNVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationCrazyDrill TM Cool XL
CrazyDrill TM Cool XL NEW Extra long High Performance Drills 2 1 shot = 1 hole CrazyDrill Cool XL for deep hole drilling With the new CrazyDrill Cool XL, the engineers from Mikron Tool have developed a
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationCarbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationANGLE JET (Angle Head Holder)
ANGE JET (Angle Head Holder) BT -AGCT-RSC - D HSA -AGCT-RSC - D With the new mechanism "the coolant unit ", the thru-the-coolant from the spindle can be supplied directly to the cutting edge. FEATURES
More informationstructure and components
HSP 643 WAVE structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic
More informationEPDBE. High-Precision Ball End Mills for Deep Machining FEATURES. Improved compound neck design for reduced chatter and increased strength
High-Precisio Ball Ed Mills for Deep Machiig FEATURES Improved compoud eck desig for reduced chatter ad icreased stregth New flute shape icreases resistace to breakage Stroger R flute helix agle improves
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationSection S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationYE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
More informationWith over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More information