DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts

Size: px
Start display at page:

Download "DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts"

Transcription

1 CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts

2 DFC Mill Features & Benefits High toughness insert design enales stale cutting and high efficiency machining with high feed rate Optimized machining accuracy y separating the insert contact areas and the cutting edges Large lineup for DFC availale from 1 through 8 in standard, fine pitch and extra-fine pitch styles Insert Characteristics Precise repositioning of inserts due to thick supporting area wear wear Optimized cutting edge yields excellent machining accuracy Squareness Performance XNMU side view conventional insert side view Work material : 1049 steel Cutting Conditions: vc=650 SFM fz=.0039 IPT Dc= 63mm ap=.197" x 3 pass, ae=.197" Wear Resistance Chart µm Cutting Edge Strength Feed Per Tooth (in/t) DFC Comp A damage Comp B damage Work material: 1049 steel Cutting Conditions: vc=650 SFM fz=.0079 IPT Dc= 100mm cutter ap=.118", ae=3.346" Surface Finish Graph Work material: 1049 steel with holes Cutting Conditions: vc=650 SFM fz=.0079 IPT Dc= 100mm cutter ap=.118", ae=2.047" x 3 pass Cutting Force Comp A Work material: 1049 steel Cutting Conditions: vc=650 SFM fz=.0079 IPT Dc= 100mm cutter ap=.118", ae=3.346" Comp A Work material: 1049 steel Cutting Conditions: vc=650 SFM fz=.0079 IPT Dc= 100mm cutter ap=.118", ae=2.953"

3 Good Cutting Edge Sharpness Inserts L Light Cutting General Purpose G Shoulder Milling GS Cutting Edge Strength Heavy Cutting H Good XNMU Inserts Insert Catalog Numer Max. Depth of Cut: 6mm (.236 ) 11.2 P 11.3 K ACP100 ACK200 ACK300 ACM200 ACM300 Radius XNMU060604PNER-L.016 XNMU060608PNER-L.031 XNMU060604PNER-G.016 XNMU060608PNER-G.031 XNMU060612PNER-G.047 XNMU060616PNER-G.063 XNMU060608PNER-H.031 XNMU060612PNER-H.047 XNMU060616PNER-H.063 XNMU060604PNER-LS.016 XNMU060608PNER-LS.031 XNMU060604PNER-GS.016 XNMU060608PNER-GS.031 XNMU060612PNER-GS.047 XNMU060616PNER-GS.063 = USA Stocked Item = World Wide Warehouse Item 3.2 M S 6 Application Range P Steel M Stainless Steel Cast Iron K Stainless Steel M Exotic S P10/M10/C7 P20/M20/C6 P30/M30/C5A P40/M40/C5 ACP100 K01 K10 K20 K30 ACK200 ACM200 ACK300 Wear Resistance Fracture Resistance ACM300 L G GS H Chipreakers Cutting Edge Corner Radius.016, ,.031,.047, ,.031,.047, ,.047,.063 Application Light Cut, Low Rigidity Milling Low-Burr Design Face Milling, General - Interrupted Milling Shoulder Milling Heavy Cut, Heavy Interrupted Machining Hardened Steel Running Conditions ISO Work Hardness Cutting Speed (SFM) Min. - Optimum - Max. Feed Rate (in./t) Min. - Optimum - Max. D.O.C. (in.) Grade General Steel 180 ~ 280HB <0.236 P Soft Steel <180HB , < Die Steel 200 ~ 220HB < M PH Stainless Steel >220HB <0.196 ACM200 Austenitic Stainless <250HB <0.236 ACM300 K Cast Iron 250HB <0.236 ACK200 ACK300

4 DFC Shell Mill Inch Lineup ød Figure 1 ød ød a Figure 2 ød ød a Figure 3 ød a Figure 4 ød ød a Body (Standard Pitch) - Inch Cat. No. Stock ød2 ø0.71 ød2 Dimensions (in.) No. of Teeth Weight (ls) ød Lf ød a l ød2 DFC22000R DFC22500R DFC23000R DFC24000R DFC24000R DFC25000R DFC26000R DFC28000R Body (Fine Pitch) - Inch DFCM22000R DFCM22500R DFCM23000R DFCM24000R DFCM24000R DFCM25000R DFCM26000R DFCM28000R Body (Extra-Fine Pitch) - Inch DFCF22000R DFCF22500R DFCF23000R DFCF24000R DFCF24000R DFCF25000R DFCF26000R DFCF28000R Fig. USA stocked item DFC Endmill Inch Lineup Body (Shank Type) Dimensions (in.) No. of Cat. No. Stock øds Lf ls L Teeth DFC21000EW DFC21250EW DFC21500EW DFC22000EW DFC22500EW DFCM21500EW DFCM22000EW DFCM22500EW Hardware øds Insert Screw Insert Wrench Coolant Through Bolts Lf L ls BFTX03512IP TRDR15IP Torque: 3.0 N m Catalog Numer Cutter Size BFXH 3/8 x " BFXH 1/2 x 1 1/4 2.50" BFXH 1/2 x 1 1/4 3.00" BFXH 5/8 x 1 1/4 4.00" BFXH 3/4 x

5 DFC Shell Mill Metric Lineup ød Figure 1 ød ød a Figure 2 ød ød a Figure 3 ød a Figure 4 ød ød a Body (Standard Pitch) - Metric Cat. No. Stock Dimensions (mm) No. of Teeth Weight (kg) ød Lf ød a l ød2 DFC09050RS « DFC09063RS « DFC09080RS « DFC09100RS « DFC09125RS « DFC09160RS « DFC09080R « DFC09100R « DFC09125R « DFC09160R « Body (Fine Pitch) - Metric DFCM09050RS « DFCM09063RS « DFCM09080RS « DFCM09100RS « DFCM09125RS « DFCM09160RS « DFCM09080R « DFCM09100R « DFCM09125R « DFCM09160R « Body (Extra-Fine Pitch) - Metric DFCF09050RS « DFCF09063RS « DFCF09080RS « DFCF09100RS « DFCF09125RS « DFCF09160RS « DFCF09080R « DFCF09100R « DFCF09125R « DFCF09160R « DFC Endmill Metric Lineup Lf L ød2 «worldwide warehouse item ls ø18mm ød2 øds Fig. Body (Shank Type) Cat. No. Stock Dimensions (mm) No. of øds Lf ls L Teeth DFC09025E « DFC09032E « DFC09040E « DFC09050E « DFC09050E-42 « DFC09063E « DFC09063E-42 « DFC09080E « DFC09080E-42 « DFCM09032E « DFCM09040E « DFCM09050E « DFCM09050E-42 « DFCM09063E « DFCM09063E-42 « DFCM09080E « DFCM09080E-42 « «worldwide warehouse item

6 For a wide range of applications Face Milling Shoulder Milling Slot Milling Side Face Milling G / GS Chipreakers Not Applicale Helical Milling Ramping G Chipreaker Application Examples Part : 4140 DFC Comp. Ring Part Tool DFCM22000R Doule Sided 6-corners Grade - Chipreaker GS - Diameter 2.000" 2.000" # of Teeth 5 5 Vc (sfm) V f (in. /min) 44" 44" f z (in. /t) 0.010" 0.010" a p (in.) 0.100" 0.100" a e (in.) 1.181" 1.181" Coolant Dry Dry Results: Achieving 6x longer tool life without re-cutting and 160% higher efficiency Part : A128 DFC Comp. Block Tool DFC26000R Doule Sided 8-corner Simultaneous Cutting Grade - Chipreaker G - Diameter 6.000" 6.000" # of Teeth 8 12 Vc (sfm) V f (in./min.) 20" 20" f z (in./t) 0.008" 0.006" a p (in.) 0.040" 0.020" a e (in.) 4.000" 4.000" Coolant Wet Wet Results: Achieving 300% longer tool life and 200% higher efficiency Part : 1049 DFC Comp. Automotive Component Tool DFC09080RS Single Sided 4-corner Grade - Chipreaker G - Diameter GS Chipreaker 3.000" (80mm) 3.000" (80mm) # of Teeth 5 5 Vc (sfm) V f (in. /min) 50" 31" f z (in. /t) 0.011" 0.008" a p (in.) 0.080" 0.080" a e (in.) 0.197" 0.197" Coolant Wet Wet Results: Achieving 160% higher efficiency GS Chipreaker Part : 1045 DFC Comp. Machine Vice DFC- Tool Single Sided M22000EW 2-corner Grade - Chipreaker GS - Diameter 2.000" 2.000" # of Teeth 5 5 Vc (sfm) Vf (in./min.) 47" 31" fz (in./t) 0.008" 0.005" ap (in.) 0.200" 0.200" ae (in.) 0.512" 0.512" Coolant Air Air Results: Achieving 150% higher efficiency Part : 1049 DFC Comp. Construction Tool DFC09063RS Single Sided 2-Corner Component Grade - Chipreaker G - Diameter 2.500" (63mm) 2.500" (63mm) # of Teeth 4 5 Vc (sfm) V f (in./min.) 43" 36" f z (in./t) 0.012" 0.008" a p (in.) 0.080" 0.080" a e (in.) 2.000" 2.000" Coolant Dry Dry Results: Achieving 120% higher efficiency Part : DFC Comp. Pump Part Tool DFCF24000R Doule Sided 6-corner Grade ACK300 - Chipreaker G - Diameter 4.000" 4.000" # of Teeth 11 8 Vc (sfm) 1,100 1,100 Vf (in./min.) 72" 72" fz (in./t) 0.006" 0.008" ap (in.) 0.080" 0.080" ae (in.) 2.950" 2.950" Coolant Dry Dry Results: Achieving 150% longer tool life

7 In addition to drastic economic advantage from DFC, doule-sided 90 milling cutter, Sumitomo Electric Caride, Inc. also provides a wide variety of high performance 90 milling cutters to fulfill your needs in any application! WEX s Serie WFX s Serie Low Cutting Force 90 Shoulder Shoulder Mill 90 Shoulder Shoulder Mill 90 Mill 90 Mill End/Shell Mills End/Shell Mills TSX s Serie 4-cornered inserts 4-cornered inserts WRX s Serie Deep 90 Shoulder Mill Shoulder Mill Tangentially Mounted Inserts uses same inserts as WEX

8 Headquarters 1001 Business Center Drive Mount Prospect, IL P.O. Box 545, Mt. Prospect, IL Phone: (800) Phone: (847) Fax: (847) Detroit Branch Sheldon Road #230 Plymouth, MI Phone: (800) Phone: (734) Fax: (734) Sumitomo Electric Tool Engineering Center 5637 S. Westridge Drive New Berlin, Wi Phone: (800) Huntsville Branch 6700 Odyssey Drive Suite 211 Huntsville, AL Phone: (256) Fax: (256) Indiana Branch 595 S. Emerson Avenue Suite 100 Greenwood, IN Phone: (800) Sumitomo Sumicaride Hardmetal Canada, Inc. Mexico (SHMM) 150 Research Lane Av. Unit Agauascalientes #210 Sur #2625 Fracc. Guelph, Jardines Ontario de N1G las Fuentes 4T2 Aguascalientes, Canada AGS Mexico C.P. Phone: (519) Phone: (844) Fax: Torrance Branch South Western Avenue Suite 120 Torrance, CA Phone: (800) Fax: (310) CAT.DFCBROCHURE.12/15

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts

DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &

More information

Sumitomo Electric Carbide, Inc. DFC Milling Cutter Series

Sumitomo Electric Carbide, Inc. DFC Milling Cutter Series CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts

More information

Summer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts

Summer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid

More information

TR4D. High Feed Radius Mill. New Product News No. H1901A

TR4D. High Feed Radius Mill. New Product News No. H1901A TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel

More information

MFH-RAPT R High Feed Milling Cutter

MFH-RAPT R High Feed Milling Cutter MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase

More information

WFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless.

WFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless. High Performnce Milling ystems eries our-cornered shoulder mill for steel, stinless steel, nd cst iron mchining teel tinless teel Cst Iron Grdes The type is the first series to offer the newly developed

More information

VFX for High Efficiency Milling of Titanium Alloys

VFX for High Efficiency Milling of Titanium Alloys TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection

More information

Features. May 1, No. 204-M-02

Features. May 1, No. 204-M-02 May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges

More information

Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.

Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A. TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter

More information

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!

TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert! TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.

More information

Excellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering

Excellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed

More information

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER

B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits

INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...

More information

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies

More information

M.A.FORD Where high performance is the standard.

M.A.FORD Where high performance is the standard. For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,

More information

Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter

Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (

More information

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money

RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even

More information

Drilling Depth ( L / D) Content

Drilling Depth ( L / D) Content Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole

More information

WAX Endmill Series. High speed, high efficiency shoulder mill for non-ferrous materials. Non-ferrous Metal

WAX Endmill Series. High speed, high efficiency shoulder mill for non-ferrous materials. Non-ferrous Metal HighPerformnce Performnce Turning ystems High Milling ystems WAX Endmill eries High speed, high efficiency shoulder mill for non-ferrous mterils Non-ferrous Metl Fetures & Benefits WAX WveMill cutters

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).

Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch). igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes

More information

Breaker. Sensation of high speed aluminum machining. Feature

Breaker. Sensation of high speed aluminum machining. Feature VF Sensation of high speed aluminum machining Breaker Feature - Multi-dimension clamping system : strong clamping force in high speed operation. - Buffed top face : Decreasing built-up edge & excellent

More information

MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING

MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that

More information

REPLACEABLE TIP DRILLS

REPLACEABLE TIP DRILLS REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467

More information

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW!

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW! Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%

More information

Mill - Thread Inserts and Kits

Mill - Thread Inserts and Kits Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand

More information

Burrs.

Burrs. g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &

More information

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different

More information

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...

Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series... Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2

More information

A + Endmill. Endmill Series for Aluminum Machining. Optimized Solutions for Each Application Type. Higher Machining Efficiency

A + Endmill. Endmill Series for Aluminum Machining. Optimized Solutions for Each Application Type. Higher Machining Efficiency Endmill Series for Machining Endmills for rough, medium to finish cutting of aluminum Optimized Solutions for Each Application Type A wide selection of tools provided for various machining processes Higher

More information

MASTER CATALOG SOLID END MILL PORTFOLIO.

MASTER CATALOG SOLID END MILL PORTFOLIO. MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades

More information

MHS. Drills for die & mold machining B137A

MHS. Drills for die & mold machining B137A 2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the

More information

WFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill

WFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries

More information

M.A.FORD Where high performance is the standard.

M.A.FORD Where high performance is the standard. Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid

More information

B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS

B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN

More information

Preview Edition: M370 ADVANCES 2014

Preview Edition: M370 ADVANCES 2014 Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides

More information

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).

Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch). igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30

More information

UPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)

UPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)

More information

TOOL NEWS. Heptagonal double sided insert. Economical 14 cutting edge inserts. General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series

TOOL NEWS. Heptagonal double sided insert. Economical 14 cutting edge inserts. General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series TOOL NEWS General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series 2016.6 Update B195A Series Expansion Heptagonal double sided insert. Economical 14 cutting edge inserts. AHX440S for Machining

More information

ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL

ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL 90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low

More information

AQUA Drill EX FLAT Series New Drilling Technology

AQUA Drill EX FLAT Series New Drilling Technology AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long

More information

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12. Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.

More information

AQUA DRILL EX FLAT SERIES

AQUA DRILL EX FLAT SERIES AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,

More information

Extremely small dimensions, extremely high precision.

Extremely small dimensions, extremely high precision. Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance

More information

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened

More information

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2

More information

NIAGARA CUTTER THREAD MILLING THREAD MILLS

NIAGARA CUTTER THREAD MILLING THREAD MILLS NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD

More information

January /9. New Cutter with Strong Insert

January /9. New Cutter with Strong Insert 1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed

More information

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06

More information

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

More information

Grooving Tool Holders GND Type

Grooving Tool Holders GND Type TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving

More information

SR-SAF Ball nose roughing endmill

SR-SAF Ball nose roughing endmill / BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.

More information

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable

More information

S-TAW. Changeable Carbide Insert Type Drill

S-TAW. Changeable Carbide Insert Type Drill News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54

More information

High Efficiency Drilling in Various Types of Machining

High Efficiency Drilling in Various Types of Machining TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling

More information

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated

More information

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry

More information

A revolution in stainless steel turning

A revolution in stainless steel turning A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic deformation resistance. B201E ISO insert Series for Stainless

More information

PCD & CBN TANGENTIAL MILLING

PCD & CBN TANGENTIAL MILLING & TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS

More information

Machining Intelligently

Machining Intelligently ISCAR s Solutions for Manufacturing Turbochargers Machining Intelligently ISCAR HIGH Q LINES www.iscar.com Turbocharger Industries Turbine Housing Compressor Housing Turbine Wheel Bearing Housing In today

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip

More information

Improved Grooving Performance with Expansive Tooling System Lineup

Improved Grooving Performance with Expansive Tooling System Lineup KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD

More information

Reduced Chip Biting Issues when Grooving Small Parts

Reduced Chip Biting Issues when Grooving Small Parts Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application

More information

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high

More information

TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G

TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.

More information

CTR Counterboring Tools

CTR Counterboring Tools CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land

More information

MHS TOOLS NEWS B137G. Drills for die & mould machining

MHS TOOLS NEWS B137G. Drills for die & mould machining TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need

More information

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened

More information

PDL025. DLC Coating. High Quality and Long Tool Life for Machining Aluminum

PDL025. DLC Coating. High Quality and Long Tool Life for Machining Aluminum High Quality and Long Tool Life for Machining Aluminum Achieves Long Tool Life with Hardness Close to that of Diamond Excellent with Aluminum Welding Resistance Large Lineup for Turning, Milling, and Cut-Off

More information

GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker

GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges

More information

High-performance milling cutter NVDS For up to 15 times faster penetration

High-performance milling cutter NVDS For up to 15 times faster penetration passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range

More information

High Efficiency Drilling in Various Types of Machining

High Efficiency Drilling in Various Types of Machining TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1 Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank

More information

EKGT. Eco KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Optimized Economical Grooving Tool

EKGT. Eco KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Optimized Economical Grooving Tool Eco KORLOY Grooving Tool Multifunctional Machining with Strong Clamping System Optimized Economical Grooving Tool Strong Clamping System Strong clamping system ensures stable and accurate machining Wide

More information

Multi-Lock Milling Chuck

Multi-Lock Milling Chuck Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting

More information

circular saw blades side milling cutters

circular saw blades side milling cutters edition 04 / 2018 circular saw lades side milling cutters cutting-off, sawing, milling Overview Information aout the catalogue 2 Tools 4 Circular knives 34 Special tools 36 Technical information 38 1 Grüezi

More information

Solid End Milling High-Performance Solid Carbide End Mills

Solid End Milling High-Performance Solid Carbide End Mills Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid

More information

KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System

KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers

More information

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability. The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data

More information

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs

More information

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1 Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank

More information

High feed-rate machining, combined with a low axial engagement, reduces production times while utilizing existing machinery.

High feed-rate machining, combined with a low axial engagement, reduces production times while utilizing existing machinery. V555 & V556 High Feed Milling System Save time and reduce production costs with high productivity milling cutters. High feed-rate machining, combined with a low axial engagement, reduces production times

More information

KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System

KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers

More information

GEAR GENERATION GEAR FORMING. Vipin K. Sharma

GEAR GENERATION GEAR FORMING. Vipin K. Sharma GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.

More information

Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium

Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for

More information

THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances

THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System

More information

A revolution in stainless steel turning

A revolution in stainless steel turning ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic

More information

CMT Vertical Mill-Thread

CMT Vertical Mill-Thread CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground

More information

HY-PRO AERO-F Inch & Metric Plug (4P-5P)

HY-PRO AERO-F Inch & Metric Plug (4P-5P) HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605

More information

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance

SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance

More information

Damping Pro. Special designed unique Anti-vibration system

Damping Pro. Special designed unique Anti-vibration system KORLOY AntiVibration Tool Special designed unique Antivibration system Application of special design provides excellent AntiVibration effect and optimized for Overhang work Capable to elevate Feed comparing

More information

KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip

More information

CERATIZIT designation system

CERATIZIT designation system C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information

No: Features Multi-dimensional clamping system : strong clamping force in high speed operation

No: Features Multi-dimensional clamping system : strong clamping force in high speed operation No: 184 Features Multidimensional clamping system : strong clamping force in high speed operation The buffed mirror face of ProX Mill insert demonstrates outstanding chip control and prevents builtup edge.

More information

HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH

HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information