List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
|
|
|
- Henry Copeland
- 5 years ago
- Views:
Transcription
1 List Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d / / / , / / , / , 5, / / , / / Available SS (D 0.055) and WXS (D 0.064) only. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Cast CoCr EXOCARB
2 List Miniature, Helical Flute P450 Size Pitch Cutter Dia. Overall Neck Shank Dia. No. of D L Lc L1 d M M M M M1.7, M M M2.5, M M M M Available SS (D 0.055) and WXS (D 0.064) only. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Cast CoCr EXOCARB
3 List UNC/UNF/UNEF/UNS, Regular & Long, Helical Flute Threads Per Inch Available EXO coating only. Cutter Overall Neck Shank No. of Size UNC UNF UNEF UNS D L Lc L1 d / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Cast CoCr EXOCARB
4 List Regular & Long, Helical Flute Available EXO coating only. Cutter Overall Neck Shank No. of Size Pitch D L Lc L1 d M M M M M M M M M M M M M M M M M M M M M M M M M M M Type 1 Type Cast CoCr EXOCARB
5 List Coolant-through, Long, Helical Flute Cutter Overall Neck Shank No. of Size Pitch D L Lc L1 d M M M M M M M M M M M M M M M Available EXO coating only. Type 1 Type Cast CoCr EXOCARB
6 List NPT, Helical Flute Thread Form TPI Tip Overall Neck Shank Dia. No. of D1 L Lc L1 d 1/ / / / /4 or 3/ / /2 or 3/ / thru / / Available EXO coating only. Type EDP Number List NPTF, Helical Flute Thread Form TPI Tip Overall Neck Shank Dia. No. of D1 L Lc L1 d 1/ / / / /4 or 3/ / / / / / or 1-1/4 11-1/ /2 or / / Available EXO coating only. Type 3 Type 4 Type EDP Number Cast CoCr EXOCARB
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
HY-PRO AERO-F Inch & Metric Plug (4P-5P)
HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
With over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
OMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
TWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length
C SERIES HREADMIING hreadmilling Insert Nomenclature Chart I 15 N 8 UN I threadmilling insert insert length type of insert N P 75.750 (19.05) 1 1.000 (25.40) 1.5 1.500 (38.10) hreadmilling Cutter Nomenclature
Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
370/230/UNF 370/330/UNF 370/460/UNF 370/36/UNF 2 370/23/UNF 2 370/16/UNF 2 380/230/UNF 2 380/330/UNF 2 380/460/UNF 2 380/36/UNF 2 380/23/UNF 2
Angle Wheels Buffout Wheels Continued 370/230/UNF 3 8 ⅜ UNF. 24 tpi 230 6 Angle Wheel 8 Angle Wheel 370/330/UNF 370/460/UNF 3 8 ⅜ UNF. 24 tpi 330 3 8 ⅜ UNF. 24 tpi 460 110/230/60 6 60mm 230 110/330/60
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
ADVANCED. Grips & Attachments.
www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
New Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
LEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
Blank Size AEW BEW CEW DEW AA A B C D E AAL AL BL CL AE BE CE DE HA HB HC HD /4-20, 10-24, /4-20, 5/ /8-16 LA LB LC LD LE
Telephone: 800-8-784 Fax: 704-927-279 WING NUTS Effective 02/0/0 Product Blank s Wing Spread Overall Lbs/M Washer Base 232 300 232 400 232 500 232 600 AEW BEW CEW DEW /4-20,, 0-24, 0-32 /4-20, -6, 5/6-8
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
TAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
A Resource for Semiconductor Manufacturers Illustrated Parts Guide for Axcelis GSD 200E² 160V
Illustrated Parts Guide for Axcelis GSD 00E² 0V GSD Water Cooled & Non-Water Cooled Bushing and Liner Flange Upgrades Pgs. - Source Body Components Non-Vaporizer / Vaporizer Pgs. -0 Extraction Electrode
POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
Power TOOLS. Power Threading Machine / Model 535. Power Threading / Model Model 300 Compact Threading Machine
Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor.
~ MHDG-CCP MHDG Impulse Enterprise, Inc. MINIATURE HIGH DENSITY SERIES STAINLESS STEEL .56 DELRIN WASHER 1.51
MHDG.. DIA. MHDG-CCP NEOPRENE/ DELRIN WASHER.. MHDG-CCP-RA NAVAL BRONZE MHDG-CCP. 00-H MHDG-CCR ALIGNMENT KEY -0 (SEE DETAIL A)....00 DIA -0.0-0 MHDG-BCR.. HEX - /- UNF-A DETAIL A Technical Bulletin 0-00--0
VIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
Lubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
POWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
Features. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
FIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
Disc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
35 & 35D. P.O. Box 1388 West Sacramento, CA (916) Fax: (916)
35 & 35D P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 35 Installation Dimensions Model 35CF2-66-1 (Illustrated with Code 2 Flanged Output Shaft) 1.10
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
[15.2] .5 [12.7] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 1.62 [41.1] PART NUMBER
![[15.2] .5 [12.7] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 1.62 [41.1] PART NUMBER](/thumbs/84/90869900.jpg "[15.2] .5 [12.7] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 1.62 [41.1] PART NUMBER")
LABEL PART PER SPEC A-34473 1-16 96.6 [15.2] 4X.56 ±.045 [14.2 ±1.14] NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETRES ALL DIMENSIONS ARE FOR REFERENCE ONLY (4) GROOVES ACCEPT SAE 1/2" BELTS M10 X 1.5-6H THRU
Threading 4.1. Pipe Capacity (in.) No. of Models. Type
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES
FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
NEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Bimetal Thermowells Threaded
Bimetal Threaded Stepped Shank P P EXTERNAL THREAD [7] 2 1 / 2 only.75.75 [19] Lagging fl.50 Ø.50 [13] 1/2 P EXTERNAL THREAD P EXTERNAL THREAD [7] P P EXTERNAL THREAD THREAD.260 Ø.260 [7] [7].40.40 [10]
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
Vol. 2 HY-PRO SHRINK
Vol. 2 HY-PRO SHRINK Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the
SECTION FIVE INDUSTRIAL LUBRICATIONFITTINGS
INDUSTRIAL LUBRICATIONFITTINGS Threaded/Drive Carbon Steel/Monel/Stainless Steel Standard/Metric Specialty Vents/Breathers Couplers Accessories 82 Alemite Product Catalog As the inventor of the Zerk fitting,
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
Contents Section E. Section E Contents. Series
Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts...
HYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
MODEL B HYDRAULIC PUMP
< < SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
Disc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
Spring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
Solid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
hydroline filters and accessories
hydroline filters and accessories 12 Hydroline Filters and Accessories SECTION 12 Prices Suction Strainer Filters Inline Spin on Filter Tank Immersed Gauge Indicators Level Gauge Sight Level Gauge Threaded
accessories Hydroline Filters and Accessories hydroline filters & 14 hydroline filters & accessories Filters Inline Spin on
hydroline filters & accessories Hydroline Filters and Accessories hydroline filters & accessories Prices Sec:2 Suction Strainer Sec:4 Filters Inline Spin on Sec:5 Filter Tank Top Sec:9 Gauge Indicators
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
Product Catalogue 835. Smart Solutions on the Cutting Edge
Product Catalogue 835 Smart Solutions on the Cutting Edge 1 2 The World of WhizCut Smart Solutions on the Cutting Edge Demand on production for small parts around the world is continuously increasing.
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
Disc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
Lubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for