Solid Carbide Performance Routers
|
|
- Cordelia Gardner
- 5 years ago
- Views:
Transcription
1 Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK
2 Solid Carbide 3 Flute Rippers Solid Carbide 3-Flute Slow Spiral Ripper 10º Helix - Mill End SP HP CP Dia Dia Part No Part No /8 3/8 1-1/8 3-1/ /2 1/2 1-1/8 3-1/ /2 1/2 1-5/ /8 5/8 1-5/ /8 5/8 2-1/ /4 3/4 1-5/ /4 3/4 2-1/ Solid Carbide 3-Flute High Spiral Ripper 30º Helix - Mill End SP HP CP Dia Dia Part No Part No /8 3/8 1-1/8 3-1/ /2 1/2 1-1/8 3-1/ /2 1/2 1-5/ /8 5/8 1-5/ /8 5/8 2-1/ /4 3/4 1-5/ /4 3/4 2-1/ Solid Carbide 3-Flute High Impact Spiral Ripper 30º Helix - Mill End SP HP CP Dia Dia Part No Part No 3/8 3/8 1-1/ /2 1/2 1-1/ /2 1/2 1-5/8 3-1/ /2 1/2 2-1/ Solid Carbide 3-Flute Spiral Router 30º Helix - Lock Mortise - Mill End Cutter Shank FL Reach OAL Dia Dia Part No /8 5/ /2 6-1/ Soft wood SP Soft plastic GF Glass Fibre Hard wood HP Hard plastic SS Solid surface Composite wood AC Acrylic A Aluminium Laminated wood CP Composite F Foam Tel: Fax: sales@merlintools.co.uk
3 Solid Carbide Compression Spiral Routers Solid Carbide 1-Flute Compression Router 30º Helix Compression Mortise Cutter Shank FL OAL Comp Mortise Dia Dia Flute Lgth Part No Part No Full Technical Catalogue on request Technical Support available 1/8 1/4 3/8 2-1/ /16 1/4 5/8 2-1/ /4 1/4 7/8 2-1/ /4 1/4 7/8 2-1/ /8 3/8 7/ /8 3/8 1-1/ /2 1/2 7/ /2 1/2 7/ LH 1/2 1/ /2 1/2 1-1/ /2 1/2 1-3/8 3-1/ /2 1/2 1-5/8 3-1/ /2 1/2 1-5/8 3-1/ /2 1/2 1-5/8 3-1/ LH 5/8 5/8 2-1/ /4 3/ Solid Carbide 2-Flute Compression & Mortise Router 30º Helix Compression Mortise Extremely Competitive Pricing Ex Stock Delivery on All Tools Cutter Shank FL OAL Comp Mortise Dia Dia Flute Lgth Part No Part No /4 1/4 7/8 2-1/ /4 1/4 7/8 2-1/ /4 1/4 7/8 2-1/ /8 3/8 7/ /8 1/ /8 1/ /8 3/8 1-1/ /8 3/8 1-1/ LH 3/8 1/2 1-1/ /8 3/8 1-1/ /8 3/8 1-1/ /2 1/2 7/ /2 1/ /2 1/2 1-1/ /2 1/2 1-1/ /2 1/2 1-5/ /2 1/2 1-3/8 3-1/ /2 1/2 1-3/8 3-1/ /2 1/2 1-5/8 3-1/ /2 1/2 1-5/ /2 1/2 1-5/ LH 5/8 5/8 2-1/ /4 3/4 1-7/ /4 3/4 2-1/ Specials & Modifications Service Tel: Fax: sales@merlintools.co.uk
4 Solid Carbide Compression Spiral Routers Solid Carbide 3-Flute Compression & Mortise Router 30º Helix Compression Mortise Cutter Shank FL OAL Comp Mortise Dia Dia Flute Lgth Part No Part No 3/8 3/8 7/ /8 3/8 1-1/ /2 1/2 7/ /2 1/2 1-1/ /2 1/2 1-3/8 3-1/ /2 1/2 1-5/8 3-1/ /4 3/ /4 3/ Solid Carbide 3-Flute High Wear Compression & Mortise Router 30º Helix Compression Cutter Shank FL OAL Comp Mortise Dia Dia Part No Part No 3/8 3/8 7/ /8 3/8 7/ Mortise 7202 Solid Carbide 4-Flute Combination Compression Router 30º Helix Cutter Shank FL OAL Part Dia Dia Flute Lgth Number 1/2 1/ /2 1/2 1-1/ /2 1/2 1-3/8 3-1/ /2 1/2 1-5/ /8 5/8 2-1/ /4 3/4 1-7/ /4 3/4 2-1/ Full Technical Catalogue on request Technical Support available Tel: Fax: sales@merlintools.co.uk
5 Solid Carbide Chipbreaker Finisher Solid Carbide 2-Flute Spiral Router Chipbreaker Finisher 30º Helix Dia Dia Part No Part No /8 3/8 1-1/ /2 1/2 1-1/ /2 1/2 1-5/8 3-1/ /2 1/2 1-7/8 3-1/ /2 1/2 2-1/ /8 5/8 2-1/ /4 3/4 2-1/ Solid Carbide 2-Flute Spiral Router High Impact - Chipbreaker Finisher 30º Helix Dia Dia Part No Part No 3/8 3/8 1-1/ /2 1/2 1-1/ /2 1/2 1-5/8 3-1/ /2 1/2 2-1/ Solid Carbide 3-Flute Spiral Router Chipbreaker Finisher 30º Helix Dia Dia Part No Part No /8 3/8 1-1/ /2 1/2 1-1/ /2 1/2 1-3/8 3-1/ /2 1/2 1-5/8 3-1/ /8 5/8 1-5/ /4 3/4 1-5/ /4 3/4 2-1/ /4 3/4 3-1/ Solid Carbide 4-Flute Combination Spiral Router 30º Helix Dia Dia Part No Part No 1/2 1/2 1-1/8 3-1/ /2 1/2 1-5/ /2 1/2 2-1/8 4-1/ /8 5/8 2-1/ /4 3/4 2-1/ Tel: Fax: sales@merlintools.co.uk
6 Solid Carbide 1-Flute Spiral Routers Solid Carbide Polished 1-Flute O-Flute Xtreme Router 25º Helix SP HP AC SS Extremely Competitive Pricing Ex Stock Delivery on All Tools Specials & Modifications Service A Dia Dia Part No Part No /16 1/8 1/ /8 1/8 1/ /8 1/4 1/ /8 1/8 1/ /8 1/4 1/ /32 1/4 9/ /16 3/16 3/ /16 3/16 5/ /16 1/4 3/ /16 1/4 1/ /16 1/4 5/ /32 1/4 3/4 2-1/ /4 1/4 5/ /4 1/4 3/4 2-1/ /4 1/4 1-1/ /8 3/8 1-1/ /2 1/ /2 1/ Solid Carbide 1-Flute Spiral Router 30º Helix Dia Dia Part No Part No 1/8 1/4 1/ /16 1/4 3/ /4 1/4 7/8 2-1/ /4 1/ / /16 5/16 1-1/ /8 3/8 1-1/ /2 1/2 1-1/ Solid Carbide 1-Flute Straight Router V-Flute Full Technical Catalogue on request Technical Support available Cutter Shank FL OAL Part Dia Dia Number 1/8 1/4 1/ /16 1/4 3/ /4 1/4 7/8 2-1/ /4 1/ / /16 5/16 1-1/ /8 3/8 1-1/ /2 1/2 1-1/ Tel: Fax: sales@merlintools.co.uk
7 Solid Carbide 2-Flute Fishtail Spiral Routers Solid Carbide 2-Flute Spiral Router 30º Helix - Fishtail End SP SS Dia Dia Part No Part No Extremely Competitive Pricing Ex Stock Delivery on All Tools Specials & Modifications Service 3/32 1/8 9/32 1-1/ /8 1/8 1/ /8 1/4 1/ /8 1/4 1/ LH LH 5/32 1/4 5/ /32 1/4 1/2 2-1/ /16 3/16 3/ /16 1/4 3/ /16 1/4 3/ LH LH 3/16 1/4 3/4 2-1/ /32 1/4 3/4 2-1/ /32 1/ / /4 1/4 7/8 2-1/ /4 1/ / /4 1/ / LH LH 1/4 1/4 1-1/ /32 5/ / /16 5/ / /16 5/16 1-1/ /16 5/16 1-1/ /16 1/2 1-1/ /16 1/2 1-1/ LH LH 5/16 5/16 1-3/ /8 3/ / /8 3/ /8 3/8 1-1/ /8 3/8 1-1/ /8 3/8 1-1/ LH LH 3/8 1/2 1-1/ /16 1/ /2 1/2 1-1/ /2 1/2 1-1/4 3-1/ /2 1/2 1-5/8 3-1/ /2 1/2 1-5/8 3-1/ LH LH 1/2 1/2 2-1/ /32 1/2 1-1/ /8 5/8 1-5/8 3-1/ /8 5/8 2-1/ /8 5/8 2-1/ LH LH 3/4 3/4 1-5/ /4 3/4 2-1/ /4 3/4 2-1/ LH LH Solid Carbide 2-Flute High Impact Spiral Router 30º Helix - Fishtail End Dia Dia Part No Part No 1/4 1/4 7/8 2-1/ /8 3/8 7/ /8 3/8 1-1/ /8 3/8 1-1/ /2 1/2 1-1/ Tel: Fax: sales@merlintools.co.uk
8 Specials, Regrinds and Modification At Merlin Tools we pride ourselves on understanding the needs of our clients. We know you expect quality and precision not only from our impressive range of ex stock tooling but also when you need something special. Merlin Tools provides a full service capability that is dedicated to providing you with the highest quality in precision manufactured cutting tools to meet the most demanding requirements. Our bespoke tool manufacturing service builds on this reputation and provides you with the exacting precision performance tool tailored for your specific needs. A Full Tool Rescue Service Our special Tool Rescue service offers the opportunity for us to Regrind, Recondition and Repair your existing tools. This service will breath new life into those tools that have worked so hard for you and produce a cost effective machining solution, returning tools to you as new. Original coating can be re-applied to tools on request. A Tool Rescue box is available upon request. Whenever you need to use the service give our sales team a call and we will arrange courier collection of your Tool Box for delivery to our technical department. Extremely Competitive Pricing Ex Stock Delivery on All Tools Specials & Modifications Service Call us now for your FREE 116 page Solid Carbide ROUTER Catalogue! Single Flute 2 Flute 3 Flute 4 Flute Routers Trimmers Engravers Grooving Rounding & Chamfering Tools ER Collets & Toolholders for the machining of Plastics, Foam, Soft Wood, Hard Wood, Glass Fibre, Aluminium, Laminates, Composites and Solid Surface.
Solid Carbide Performance Routers
Solid Carbide Routers Manufactured in Manufactured inthe theus US Distributed in Distributed inthe theuk UK Plastics crylic BS luminium PVC Nylon Polypropylene Polycarbonate Solid Carbide 1-Flute O-Flute
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationIndustrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
More informationINDUSTRIAL ROUTING CUTTING TOOLS
CUTTING TOOLS Technical Information UpCut, DownCut, Compression. What are the pros and cons of each of these chip flow styles? Below highlights some of the key considerations that should be taken into
More informationFine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
More informationWood- and board material. Plastic. Composite. Aluminium. CNC milling tools.
Wood- and board material Plastic Composite Aluminium CNC milling tools INTRODUCTION JHV Tools produce solid shank cutters for working of all materials. JHV Tools has particularly specialized in producing
More informationrouter tooling catalogue
router tooling catalogue 2018 19 Symbols Calibre profile Tool designed to drill blind holes in natural wood, chipboard panels, plywood etc. Tool designed to drill through holes in natural wood, chipboard
More informationPrice list 2018 Bits and Accessories
Series Universal M Solid Single Flute UNI for Aluminium, ACM, Brass, Plastics, Wood, MDF etc. D d l L FRCR0010304UM 3 1 4 38 FRCR001,50306UM 3 1,5 6 38 FRCR0020306UM 3 2 6 38 FRCR002,50306UM 3 2,5 6 38
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationContents. Milling. Solid end mills
UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect
More informationPCD REAMER PCD Reamers Catalogue. Wuxi Sundi Precision Tools Co.,Ltd. Content. Tel:
PCD REAMER 2016-2017 PCD Reamers Catalogue Email: info@sudicuttingtools.com Overview PCD Reamer Production Performance Content E1 E2 E3-E5 E5 E Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Quality Control
More informationO-D TOOL & CUTTER INC. End Mill Catalog
O-D TOOL & CUTTER INC. End Mill Catalog O-D TOOL & CUTTER INC. 150 GILBERT STREET, MANSFIELD, MA 02048 Tel: (508) 339-7507 Fax: (508) 339-5667 Website: www.odtool.com CARBIDE 4 FLUTE WAVE MILLS WITH ALTIN
More informationBody Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationMARINE MARINE & OFFSHORE DOORS
MARINE MARINE & OFFSHORE DOORS INTRODUCTION MML Marine are leading specialist fabricators and suppliers of offshore fire doors, marine fire doors, watertight doors, A60 doors, A60 windows, H120 and H60
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationPEGASUS 1313 ATC ROUTER
PEGASUS 1313 by OPUS CNC PERFECT FOR MDF Plywood Chipboard Plastic Acrylic Foamex Model Board Aluminium Polycarbonate Polypropylene DESCRIPTION Many More... From the amateur to the experienced user, the
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationPCD REAMER. Content PCD Reamers Catalogue. Overview PCD Reamer Production Performance Quality Control Sundi Standard
PCD REAMER 2015-2016 PCD Reamers Catalogue Content Email: info@sudicuttingtools.com Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Overview PCD Reamer Production Performance Quality Control Sundi Standard
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationCustomer Focused & Technology Driven
Micro Tools Customer Focused & Technology Driven With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladu surpasses its goal of providing
More informationHigh-performance milling cutter NB-NVD NEW X-GENERATION
High-performance milling cutter NB-NVD NEW X-GENERATION TITANIUM MID - RANGE STEELS STAINLESS STEELS MILD STEELS NICKEL ALLOYS Universal High-Performance with a double-groove and variable helix The NB-NVD
More informationEnglish 1/2015. The Profi le System
English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear
More information"ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria
"ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria Brick Composits Concrete Natural Masonry drill type Long Life, milled flutes, for percussion and rotary drilling of concrete, brick, natural stone etc.
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More informationUSI RIVET SHAVER KIT. Part No. Cutters Included Skirts Included US7387RSK 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, /16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4
172 MATERIAL REMOVAL TOOLS This 16-piece shave kit includes the tools necessary to work on all types and sizes of aluminum and steel rivets. USI RIVET SHAVER KIT Includes the US7387RS pistol grip rivet
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationCARMA TABLES. Retail Price List/Specification Guide
CARMA TABLES Retail List/Specification Guide Specification Guide is a sophisticated looking table range with die-cast aluminium polished legs. With the option of a glass top, really does add a touch of
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationTHECUTTIN MASONRY 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS PAGE
THECUTTIN MASONRY PAGE 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS 34 Alpha_PG_09.pdf 34 23/12/08 11:01:35 AM GEDGE PAGE 36 MASONRY DRILL BITS 38 COUNTERSINK DEPTH GAUGE 39 UNIDRE MASONRY STRAIGHT 39 UNIDRE
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationGroovers. TCT Groovers Light Duty 4 Wing. TCT Undercut Groovers 4 Wing. Premier Groovers 93 G407/LDTA
Groovers TCT Undercut Groovers 4 Wing UG TCT Groovers Light Duty 4 Wing G407/LDTA UG10 Groover can be used for fitting fire proof strip. Radiused groovers are made to order. Tips can be rounded over to
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationNewest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
More informationSovereign Interior LED Projectors Issue 2
Interior LED Projectors Issue 2 02 SLM LED Projector SLM LED Projector A high quality aesthetically pleasing LED projector, utilising the very latest high power Philips Fortimo SLM modules, offering exceptionally
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationApplicable for steel, stainless steel and cast iron Suitable for dry cutting
Best of 2009 E62-6/2009-GBP Valid to 21st DEC 2009 80 0 The new Black Panther - insert has arrived! Applicable for steel, stainless steel and cast iron Suitable for dry cutting The latest generation of
More informationSLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationVELCRO & ADHESIVE BACKED DISCS. Page FLAP DISCS & FLAP WHEELS CUTTING & GRINDING DISCS QUICK CHANGE DISCS. Pages ,173 POLISHING & LAPPING
200 ABRASIVE SHEETS & COILS Pages... 160,161 201 ABRASIVE SPONGES 202 FIBRE BACKED DISCS 203 VELCRO & ADHESIVE BACKED DISCS 204 SANDING BELTS 205 SANDING BANDS & CARTRIDGE ROLLS Page................. 161
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More information(WOOD, MDF, ACRYLIC, ACP, HARD WOOD, CORIAN,) Quotation for cnc router machine
(WOOD, MDF, ACRYLIC, ACP, HARD WOOD, CORIAN,) Quotation for cnc router machine Model: MTR1325-S (3AXIS CNC ROUTER) 3000 x 1500 mm 2500 mm 1300 mm 250 mm Linear motion Guide (hiwin Taiwan) 4.5 kw type Italian
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationNVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
More informationMachining modern composite materials
GÜHING HIGH-PEFOMANCE TOOLS FO MACHINING FIBE COMPOSITE MATEIALS without fraying of fibres and delamination for optimal component surface finish quality Machining modern composite materials GÜHIN GUHING
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.morrisflex.co.uk Introduction groupuk Morrisflex is an internationally renowned brand of high quality carbide burrs and forms a key part of ATA Group, a privately owned
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationMEET OUR TEAM. North American Tool Corporation 215 Elmwood Avenue, PO Box 116, South Beloit, IL CURTIS LANSBERY PRESIDENT & CEO
MEET OUR TEAM CURTIS LANSBERY PRESIDENT & CEO BRIAN KOBISCHKA VICE PRESIDENT & CFO PHIL SAMUELS DIRECTOR OF SALES & MARKETING JEFF SHERMAN DIRECTOR OF MANUFACTURING JON ANDERSON JOY BALDWIN BARB BISHOP
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationList Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationStandard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
More information.4 hp Die Grinders & Disc Sanders
.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationProduct Line Card 2018
Product Line Card 2018 Our Manufacturers Tel: 01444 243 452 The Custom Power Specialist www.gdrectifiers.co.uk Email: enquiries@gdrectifiers.co.uk About Us GD Rectifiers is a Global Manufacturer and Distributor
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More informationRoller Garage Doors. Brochure 2016/17
Roller Garage Doors Brochure 2016/17 At Rollerdor we specialise in the Manufacture of Bespoke double skinned, insulated, remote control, electric roller garage doors that can be supplied to your specifications
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationDrill and Boring Bits, Adapters
800-544-8436 www.guhdo.com rill and Boring Bits, Adapters Hinge Boring Bit T.C. Z2+V2 30103 25 65 8 30103-5-02500-R 30 65 8 30103-5-03000-R 35 65 8 30103-5-03500-R Two raker teeth, centre point and two
More informationPOWERGEAR. Miniature NEW. Actual Size. Impressively small and incredibly powerful.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWERGEAR Miniature NEW Impressively small and incredibly powerful. Actual Size The bevel gearbox with minimum size at maximum performance and precision The
More informationall around precision
all around precision PG Mini Small, universal, but above all absolutely precise: PG Mini, a new line of tools and accessories designed to meet every working need. Cutting, sanding, smoothing, drilling,
More informationWhy Designed by Roger Webb Associates Product Guide.
Why Designed by Roger Webb Associates Product Guide www. 2 Why Why Why is an ergonomically designed task chair with a distinctive, contemporary style. All Why chairs have a self-adjusting synchronised
More informationBT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2
/ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER
More informationmax. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More information