Multi-Lock Milling Chuck
|
|
- Jody Jefferson
- 6 years ago
- Views:
Transcription
1
2 Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting performance Wear of the bearing surface is only 1 ~ 2 microns even after heavy use over many years thanks to the extra needle rollers when compared to competitor products and the use of a special material and unique sub-zero treatment used in the manufacturing process by Nikken. The larger quantity of needle rollers results in a similar load with a smaller force and reduced damage on the bearing surface. This creates an increased chucking torque. Thanks to the internal slots, even if oil remains on the end mill shank, there is no reduction in chucking torque. Exacting Run-Out Accuracy Only Nikken s Multi-Lock Milling Chuck is capable of achieving a run-out accuracy within 5µm [T.I.R] at 100mm from the nose (C32 model) MULTI-LOCK CAPABILITIES & SPECIFICATIONS Order Code ØC1 ØD L l1 l2 Collet Weight (kg) C6-MDC KM16, CCK C6-MDC KM20, CCK C6-MDC KM25, CCK C6-MDC KM32, CCK Applicable spanners: MDC16=HC16, MDC20=HC22, MDC25=HC25, MDC32=HC32
3 Pro-End Mill Arbor KEY BENEFITS: Built-in Major Dream vibration dampening system Compatible with all Depo style cutters Nikken Pro-End Mill available Increased tool life Improved cutting performance PRO-END MILL ARBOR CAPABILITIES & SPECIFICATIONS Order Code ØD L1 Ød l l1 l2 G Cutter (ref) Insert C6-MDPE-M8-60, , M8 M8-MDPE16-30 AOMT12 C6-MDPE-M10-65, , M10 M10-MDPE20-30 AOMT12 C6-MDPE-M12-60, , M12 M12-MDPE25-35 AOMT18 C6-MDPE-M16-70, , M16 M16-MDPE32-40 AOMT18 Nikken MDPE is centre-through as standard. For further Nikken cutter details & insert options please see catalogue 2802E
4 Major Dream Slim Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Power of TiN Bearing Nut 8º taper for increased gripping torque & rigidity Increased tool life Improved cutting performance Exacting Run-Out Accuracy Only Nikken s C6 Slim Chuck is capable of achieving a run-out accuracy within 3µm [T.I.R] at 4 x D MAJOR DREAM SLIM CHUCK CAPABILITIES & SPECIFICATIONS Order Code ØC ØC1 ØD L l1 l2 Collet Weight (kg) C6-MDSK10-65, , , , 43 SK10-A 1.0, 1.3 C6-MDSK16-70, , , , 43 SK16-A 1.0, 1.5 C6-MDSK20-80, , SK20-A 1. Applicable spanners: MDSK10=GH10, MDSK16=GH16, MDSK20=GH20 PLEASE NOTE: Also available as a standard Slim Chuck for C6 Spindles - see opposite page
5 Standard Slim Chuck KEY BENEFITS: Power of TiN Bearing Nut 8º taper for increased gripping torque & rigidity Improved cutting performance Standard Nut & J Type Nut Power of TiN Bearing Nut STANDARD SLIM CHUCK CAPABILITIES & SPECIFICATIONS Order Code ØC ØD L Collet C6-SK6-60, , 0 SK6-* C6-SK10-60, 0, 120, , 0, 120, 150 SK10-* C6-SK16-60, 0, 120, , 0, 120, 150 SK16-* C6-SK20-70, , 0 SK20-* Applicable spanners: MDSK10=GH10, MDSK16=GH16, MDSK20=GH20
6 Q26 Boring Base Holder Q26 BORING BASE HOLDER CAPABILITIES & SPECIFICATIONS Order Code ØQ L C C1 H Boring Capability Weight (kg) C6-MDQ Ø Base holder is centre-through as standard. Please specify appropriate boring heads for centre-through C coolant supply MODULAR TYPE ZMAC BORING HEAD - Finishing ø16mm to ø70mm MODULAR TYPE ZMAC BORING HEAD CAPABILITIES & SPECIFICATIONS Set/Head Code No. Range Depth Coupling Spacer Head Remarks (Q)Q1-Min.D-L1/L D M Q Q-Q1-h Q1-Min.D-L h L1 Q1 C C1 Unit No Insert Fig. Q26-12-ZMAC SP ZMAC M2HZ-16 Q26-12-ZMAC SP ZMAC MP-C, B Q26--ZMAC SP ZMAC M2HZ Q26-12-ZMAC SP ZMAC M3HZ-25 Q26-16-ZMAC SP ZMAC M4HZ-32 4MP-C, B 3 1 Q26-20-ZMAC SP ZMAC M4HZ-42 RAC TYPE BALANCE -CUT BORING HEAD - Roughing ø25mm to ø70mm 6MP-C, B 26-ZMAC ZMAC M5HZ-55 2 G Grade insert supplied as standard for steel, stainless and cast iron. B Grade should be specified for hardened steel or high speed boring of cast iron. Items marked Fig 1 & Fig 3 include stepped spacer to allow connection to Nikken Q26 base holder. Centre through coolant is available as an option, please specify C at the end of the code (e.g. 26-ZMAC55-70C). Lightweight hardened aluminium head is also available for high speed applications, please add AA to end of the code (e.g. 26-ZMAC55-70AA). MODULAR TYPE RAC BALANCE-CUT BORING HEAD CAPABILITIES & SPECIFICATIONS Set/Head Code No. Range Depth Coupling Spacer Head Remarks Q-Q1-Min.D-L D M Q Q-Q1-h Q1-Min.D-L h L1 Q1 C C1 Cartridge Insert Fig. Q26-12-RAC SP RAC RCC-25 CC Q26-16-RAC SP RAC RCC-32 CC08 1 Q26-20-RAC SP RAC RCC RAC RCC-53 2 Standard cartridge is suitable for cast iron or mild steel. Cartridges & inserts for stainless / alloy steel (E), aluminium & cast iron (A) or for through hole (K) are also available (p5 - Cat 303F). Add E, A, or K to code (eg. Q26-12RAC25-55A). Items marked Fig 1 include stepped spacer to allow connection to Nikken Q26 base holder. Centre through coolant is available as an option, please specify C at the end of the code (eg. 26-RAC53-70-C). CN08
7 SPACERS FOR MODULAR BORING HEADS STRAIGHT EXTENSION SPACERS Code No. Coupling Diameter C C1 Coupling Q-Q1-L Q Q1 SP B1 SP B SP B12 STRAIGHT EXTENSION SPACERS Code No. Coupling Diameter C Coupling Q-Q1-L Q Q1 SP--30, 45 1 B1 SP , 45, B12 SP , 45, B16 SP B1 SP , B20 SP B12 SP , B26N SP , B16 SP26--30, 45 SP , B SP , 60, B16 1 B1 SP , 60, B20 FOR A1 TYPE SPACER Max L / D = 6 times Please specify the L length when ordering A1 type spacer (eg. SP A1 where Q1= & L=85) A1 EXTENDED STEPPED SPACERS Coupling Diameter Q Q1 C C1 Max. L DJ BORING HEAD WITH DJ BORING BITS - Fine Finishing ø3mm to ø50mm DJ BORING HEAD SET CAPABILITIES & SPECIFICATIONS DJ No. Code No. Boring Range Boring Depth Bit Hole Size Bit Stroke Q L C L1 Q No. - Min. D-L D M J S Bit Code No (standard accessories) Insert J DJ3 Q26-DJ DJ8 Q26-DJ8-44N J J J J J J J CC03-C 3MP-C 6MP-C 3MP-C 6MP-C Each set of DJ3 & DJ8 includes four pieces of DJ Noring Bits as shown above with additional accessories; inserts, insert clamp handle (T6, T8, [10S for DJ3]) and micro adjusting handle (M2.5). C Grade carbide inserts are supplied as standard. DJ Boring head without boring bits is also available (eg. Q26-DJ3-36-BD or Q26-DJ8-44-BD).
8 Nikken Kosakusho strives to offer performance and capabilities from our range of NC Tooling products that deliver a solid Return on Investment through ensurung increased tool and consumable life, decrease spindle wear and a vastly superior accuracy and finish for any job. Our products for machines equipped with C6 Spindles are enhanced by the inclusion of our Major Dream vibration dampening system to ensure organisations can fully maximise the performance capabilities afforded to them through their decision to purchase a C6 Spindle machine. Nikken Kosakusho Europe Ltd The Euro Centre - Precision House - Mangham Way - Rotherham - South Yorkshire - S61 4RL Tel: Fax: Web:
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationWSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74
WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationHead BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationLeading the Way... In CNC Tooling Technology in the 21 st Century
Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century We specialize in CNC tooling and workholding devices for horizontal and
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationWINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationRing Type. Lever Type. Straight Type. Torque Type. Long Type. 90 Mini Angle Type. 90 Mini Angle Type (Very Small Head) 90 Angle Type.
ULTRA-PRECISION HIGH TORQUE AIR GRINDER System Chart Model Price Attachment ispeed E0 E0 E00 E000 RE00 IR-0 9.00 RE0 IH-00 9.00 IG-00.00 RE0 HG-00 9.00,000 min - (rpm) Max. ( ) RE0 BMH-00 9.00 RE0 MFC-00S.00,000
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationDRILL CHUCKS AND ARBORS
DRILL CHUCKS AND ARBORS ABOUT US We are leading manufacturer of Geared Type Drill Chucks with s and Arbors since 1944 - manufacturing wide range of our products in various sizes. We manufacture them under
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationWORKHOLDING SYSTEMS
www.ptgworkholding.co.uk WORKHOLDING SYSTEMS INSTALLATION & PRE-LOADING INSTRUCTIONS INSTALLATION & PRE-LOADING INSTRUCTIONS Pre-load Flats Machine Drawbar M/C Spindle Pre-load Adjustment Screw Mandrel
More informationCOMPANY INTRODUCTION
COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationDRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm
DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationSG9MTS Cylinder Head Seat & Guide Machine
SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationHIGH EFFICIENCY VERTICAL MACHINING CENTER
HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationANGLE HEADS. Productivity Solutions.
ANGLE HEADS Productivity Solutions www.kuvamtechnologies.com Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the
More informationVP-1100/1500 Vertical Machining Center
VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring
More informationRM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
More informationVTC VERTICAL TURNING CENTRES
VTC VERTICAL TURNING CENTRES VTC VERTICAL TURNING CENTRES VERTICAL TURNING CENTRES precision VTC VERTICAL TURNING CENTRES DANOBATGROUP is one of the largest machine tools and production systems manufacturers
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationHIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationTradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
More informationPRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED
A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING
More informationE3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationU-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationTel
30 20 10 60 0 60 H B g ed e A H1 A1 VSC-5A SUIT FOR BS-0 OR HV-6, VUT-6, VU-150 VSC-6A SUIT FOR BS-1 OR HV-8, 10, VUT-6, VU-200 VSC-7A, 8A SUIT FOR BS-2 OR HV-10, 12, 14, VUT-10, 12 VSC-10A SUIT FOR HV-14,
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationEXCISION Piccolo Magnetic Base Drill
4.1 EXCISION Piccolo Magnetic Base Drill Core Drill Capacity: Up to 40mm Ø x 50mm Depth Extremely manoeuvrable & easy to carry. Only 10.6kg! Solid Brass Guides guarantees rigidity for increased cutter
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationRadial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationCTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet
SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More information