NVS The new standard in universal machining
|
|
|
- Ira Henderson
- 5 years ago
- Views:
Transcription
1 passion for precision NVS The new standard in universal machining [ 1 ]
![NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard in universal machining.](/docs-images/88/114714851/images/2-0.jpg "NB-NVS is an easy-cut tool and as such, suitable for soft and stainless steels, hardened steels, titanium, annealed tool steels, non-ferrous metals and cast iron.")
2 NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard in universal machining. NB-NVS is an easy-cut tool and as such, suitable for soft and stainless steels, hardened steels, titanium, annealed tool steels, non-ferrous metals and cast iron. Applications range from HC milling through small lateral infeed to slot milling. The penetration edge allows extra-large angles during penetration using helical interpolation or ramping. This combination of application options is new and unique! The extensive range of diameters from 1/8 to 1 in inch and 2 to 20 mm completes the universal NVS technology. NB-NVS tools are reconditioned by FRAISA ToolService (ReTool ) so that they are as good as new. This saves on raw materials and improves overall cost effectiveness. Metric NB-NVS are made of a combination of carbides (HM). While the cutting part of the tool is made of virgin carbide, the shaft section comprises recycled MG10 carbide. The 15 cutting angle, cutting-edge reconditioning, and variable helix angle facilitate this universality. The reconditioning of the edges strengthens the sharp cutting blade, which in turn improves tool life, performance and process reliability. The new NVS standard features the FRAISA high-performance penetration edge and a short shank to further enhance machining options and productivity. Thanks to ReTool and the combination of carbides by metric versions, the environmental friendliness and economics of NVS technology are further improved upon. Maximum overall cost effectiveness is obtained through the use of suitable cutting data and machining strategies. The necessary information is available under ToolExpert and ToolExpert. The advantages: Simplification of stockkeeping and reduction of tool costs through the extremely high level of universality of NVS technology Improved tool life, performance and process reliability thanks to edge reconditioning and variable helix angle Extreme productivity increase during penetration Short shanks for a wider range of applications Greater sustainability, improved green credentials and a better price/ performance ratio by using carbide resources more sparingly and tapping the benefits of ReTool tool reconditioning Greater flexibility thanks to a large range of diameters from 1/8 to 1 and 2 to 20 mm Advancement compared with U5840 and U5940
3 NVS The new universal technology NVS Vario Smaller corner radius The cylindrical tool has a smaller corner radius that strengthens the cutting edge Higher thermal and mechanical resistance for more performance Milling tool with edge reconditioning Reconditioning of the main cutting edge for greater cutting-edge stability Increased mechanical and thermal loading of the cutting edge Overall lengthening of tool life Vario Milling tool with variable helix angle Minimization of oscillation and vibration Increased material removal rate and tool life High-performance penetration edge Easy-cut, high-performance penetration edge for high penetration angles Better performance, longer tool life and greater process reliability during penetration [ 3 ] High functionality with ToolExpert cutting data Shank material made of high-quality recycled carbide only in metric version Ecological contribution for preserving valuable carbide resources Even more cost-effective in combination with ReTool Tools with a short shank Tools with release feature from the end of the cutting edge to the shaft neck Enables repositioning for deeper infeeds beyond the length of the cutting edge Expansion of the tool s range of applications NB-NVS tools with a cutting angle of 15 are ideally suitable for use in soft and hardened steels, in stainless steels, nonferrous metals, annealed tool steel, cast iron and titanium. < Inox Stainless Ti Titanium GG(G) Copper Tool
4 Application Material d1 Flutes Speed FT RDOC RM Feed MRR Z A [in] [ft/min] [in] [in] [in] [min -1 ] [in/min] [in 3 /min] [ ] [ ] RDOC < 850 N/mm 2 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Z N/mm 2 Stainless steel [Cr-Ni/1.4301] Heat resistant steel Duplex steel [1.4462] [17-4 H] Application Material d1 Flutes Speed FT RDOC RM Feed MRR R LR [in] [ft/min] [in] [in] [in] [min -1 ] [in/min] [in 3 /min] [ ] [in] [ 4 ] R LR < 850 N/mm N/mm 2 Stainless steel [Cr-Ni/1.4301] Heat resistant steel Duplex steel [1.4462] [17-4 H] 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / More cutting data and materials can be found under ToolExpert.
5 Cylindrical end mills NB-NVS Smooth-edged, normal version with short neck High-performance penetration edge HSSB Favora Base-X X-Generation HM MG new! r d 2 d 1 l 1 d 3 l 2 l 3 Roughing Finishing < Inox Stainless Ti Titanium GG(G) Copper Tool OLYCHROM Article-N * * * * d1 e8 d2 h6 d3 l1 l2 l3 r fl 1/8 1/ /4 1/4 3/ º 4 3/16 1/ /4 3/8 5/ º 4 1/4 1/ /4 1/2 3/ /16 5/ /2 5/8 1 1/ /8 3/ /4 3/4 1 1/ /2 1/ / / /8 5/ /2 1 1/8 1 9/ /4 3/ /8 1 7/ / $ [ 5 ] * without clamping flat only
6 Application Material d1 Flutes Speed FT RDOC RM Feed MRR Z A [mm] [m/min] [mm] [mm] [mm] [min -1 ] [mm/min] [cm 3 /min] [ ] [ ] RDOC < 850 N/mm Z N/mm 2 Stainless steel [Cr-Ni/1.4301] Heat resistant steel Duplex steel [1.4462] [17-4 H] Application Material d1 Flutes Speed FT RDOC RM Feed MRR R LR [mm] [m/min] [mm] [mm] [mm] [min -1 ] [mm/min] [cm 3 /min] [ ] [mm] [ 6 ] R LR < 850 N/mm N/mm Stainless steel [Cr-Ni/1.4301] Heat resistant steel Duplex steel [1.4462] [17-4 H] More cutting data and materials can be found under ToolExpert.
7 Cylindrical end mills NB-NVS Smooth-edged, normal version with short neck High-performance penetration edge HSSB Favora Base-X X-Generation HM MG r d 2 d 1 l 1 d 3 l 2 l 3 Roughing Finishing < Inox Stainless Ti Titanium GG(G) Copper Tool Example: Order-N. OLYCHROM Coating Article-N. ø-code {8404 { { ø Code * * * d1 e8 d2 h6 d3 l1 l2 l3 fl r $ [ 7 ] * without clamping flat only If you have any question, please send an to info@fraisausa.com You may also directly contact our local customer consultant. Where is it possible to ask questions concerning the product? The FRAISA application engineers will be happy to advise you. For further information, please refer to fraisa.com.
8 Here, you will be provided with further information on the FRAISA Group. The fastest way to our E-Shop can be found here. Fraisa USA, Inc th Street SW, Suite 1 I New Brighton, MN hone: (651) I Fax: (651) mail: info@fraisausa.com I fraisa.com I You also find us at: facebook.com/fraisagroup youtube.com/fraisagroup passion for precision
NVS The new standard in universal machining. passion for precision
NVS The new standard in universal machining passion for precision NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard in universal
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
Universal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
High-performance milling cutter NX-NVD NEW
High-performance milling cutter NX-NVD NEW Universal high performance with a double groove and variable helix [ 2 ] The NX-NVD high-performance milling cutter with patented double groove geometry and variable
High-performance milling cutter NB-NVD NEW X-GENERATION
High-performance milling cutter NB-NVD NEW X-GENERATION TITANIUM MID - RANGE STEELS STAINLESS STEELS MILD STEELS NICKEL ALLOYS Universal High-Performance with a double-groove and variable helix The NB-NVD
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
NHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
High-performance milling tools New tools 2017
passion for precision High-performance miing toos New toos 2017 New cutting data cacuator TooExpert MFC End miing toos for stee, stainess stee, titanium and nicke Cyindrica Smooth-edged, norma version
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
Burrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
M.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
Preview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Milling. Widia s New M1200 Face Mill Program. Introducing... NEW!
Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%
Drills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
TAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
Milling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
Drilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
Standard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.
The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
Machining modern composite materials
GÜHING HIGH-PEFOMANCE TOOLS FO MACHINING FIBE COMPOSITE MATEIALS without fraying of fibres and delamination for optimal component surface finish quality Machining modern composite materials GÜHIN GUHING
Solid End Milling High-Performance Solid Carbide End Mills
Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
High feed-rate machining, combined with a low axial engagement, reduces production times while utilizing existing machinery.
V555 & V556 High Feed Milling System Save time and reduce production costs with high productivity milling cutters. High feed-rate machining, combined with a low axial engagement, reduces production times
ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
PRODUCT CATALOG MAIN INDEX
ROUCT CATAOG MAIN INEX Contents ages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide rills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 SS Tool Bits, End Mills & Centre rills
220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
Features. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
MASTER CATALOG SOLID END MILL PORTFOLIO.
MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades
A + Endmill. Endmill Series for Aluminum Machining. Optimized Solutions for Each Application Type. Higher Machining Efficiency
Endmill Series for Machining Endmills for rough, medium to finish cutting of aluminum Optimized Solutions for Each Application Type A wide selection of tools provided for various machining processes Higher
Shoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 90 Shoulder Milling Cutters..............................................P2 P13 Mill 1-10, 90 Helical
Wood- and board material. Plastic. Composite. Aluminium. CNC milling tools.
Wood- and board material Plastic Composite Aluminium CNC milling tools INTRODUCTION JHV Tools produce solid shank cutters for working of all materials. JHV Tools has particularly specialized in producing
Solid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
PCD REAMER PCD Reamers Catalogue. Wuxi Sundi Precision Tools Co.,Ltd. Content. Tel:
PCD REAMER 2016-2017 PCD Reamers Catalogue Email: info@sudicuttingtools.com Overview PCD Reamer Production Performance Content E1 E2 E3-E5 E5 E Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Quality Control
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
On Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
and 2013 Beyond Inserts
INNOVATIONS Innovations MASTER Master Catalogue CATALOGUE A4 CUTTING Tooling TOOLS and 2013 Beyond Inserts 2013 A4 Tooling and Beyond Inserts for All Your O.D. and I.D. Applications Primary Application
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
Drills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
Rotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
Drills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
AQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
IND ENERGY. Sustainable Solutions. Manufacturing and Farming Wind Energy for a New Generation
IND ENERGY Sustainable Solutions Manufacturing and Farming Wind Energy for a New Generation Wind Energy >> WIND INDUSTRIES >> 02/03 Wind energy Kennametal leads the way with innovation, engineering, and
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Xtra-tec. High Performance Cutter F4030
Xtra-tec High Performance Cutter F4030 Table of Content Product description Results from lab and customer Program range Application areas & Target groups Benefits for the customer Typical work pieces 2
SAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
Special drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
MFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
Heat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
2007 Product Catalog
2007 Product Catalog Get your money s worth and more. Power. Precision. Performance. Everything you need to make your operation more efficient, more productive and more profitable. It s all there, in every