Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter

Transcription

1 AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite Groove Milling ( ) General Purpose Machines 1. f the machine is not designed to achieve the recommended spindle speed, please use the max. spindle speed available.. f cutting noise and vibration are present, please change the cutting conditions accordingly. h6 Body Stock Cutting diameter ASM 00DL DL DL DL DL ASM 080DL DL DL DL Grade: DL1000 Groove Milling (mm) (min -1 ) (mm/min) (min -1 ) (mm/min).0 8, , , , , , , , , , , , , , , , , , Standard Depth-of-cut a p a e SUMDA 107

2 AURORA ASM 4000DL Type 4 4 ing Corner Groove Finishing Face Milling Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite h6 Body Stock Cutting diameter ASM 400DL DL DL DL DL ASM 4080DL DL DL DL (4 ) Grade: DL1000 General Purpose Machines 1. f the machine is not designed to achieve the recommended spindle speed, please use the max. spindle speed available.. f cutting noise and vibration are present, please change the cutting conditions accordingly SUMDA min -1 mm/minmin mm/min.0 40,000 1,400 40, ,000,000 3,000 1, ,000,600 6,000 1, ,000,600 0,000 1, ,000,700 17,000 1, ,000,700 13,000 1, ,000,800 11,000, ,500,800 8,500, ,400,800 6,400,000 Standard a p Depth-of-cut a e a e 108

3 AURORA SNB 000DL Type ing Groove Milling Groove Finishing R-Groove Milling Profile Milling Tempered Die Hardened Ti Heat Resistant Cast ron Grhite LU ( portion for ø5 and below) h6 Body Stock Cutting diameter Cutting Edge Length LU SNB 00DL DL DL DL DL SNB 080DL DL DL DL Grade: DL100 General Purpose Machines 1. f the machine is not designed to achieve the recommended spindle speed, please use the max. spindle speed available.. f cutting noise and vibration are present, please change the cutting conditions accordingly. Milling mm min -1 mm/minmin mm/min ,000 1,500 48,000 1, ,000,100 38,000 1, ,000,800 31,000, ,000,800 4,000, ,000,800 0,000, ,000,800 15,000, ,000 3,000 13,000, ,000 3,000 10,000, ,700 3,000 7,700,100 Standard a p Depth-of-cut p f p f SUMDA 109

4 AURORA SNB Type ing Groove Finishing R-Groove Milling Profile Milling Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 For Electrodes DN LU Body Stock Cutting diameter Cutting Edge Length Head diameter LU DN SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL DL DL SNB DL DL DL Grade: DL100 SUMDA 110

5 AURORA SNB Type General Purpose Machines 1. For radius processing, reduce the feed to 1/ of the recommendation.. Non water soluble coolant is recommended. 3. Because of high spindle speeds, run-out of the endmill when mounted should be less than 10 μm. Spindle Speed (min -1 ) Feed Rate (mm/min) Standard Depth-of-cut (mm) SNB DL 0, DL -50, SNB DL DL 0,000-50, DL SNB DL DL 0, DL -50, DL SNB DL DL 0, DL -30, DL SNB DL 1, DL 0, DL -30, DL SNB DL 1, DL 1, DL 0,000-30,000 1, DL DL SNB DL 3, DL 3, DL 0,000-30,000, DL, DL 1, SNB DL 0,000 4, DL 0,000 3, DL 0,000, SNB DL 16,000 4, DL 16,000 3, DL 16,000 3, DL 1,000, DL 10,000 1, SNB DL 16,000 4, DL 16,000 3, DL 1,000 3, a p a e ae SUMDA 111