4-rolls FOMP /16
|
|
- Britton Cobb
- 6 years ago
- Views:
Transcription
1 4-rolls FOMP /16 Length mm 4000 Central roll diameter mm 460 Lateral rolls diameter mm 380 Bending thickness mm 20 Pre-bending thickness mm 16 This machine is available equipped with: - Hydraulic translation - Hydraulic rotation - Analogical displays - Electro-hydraulic controls from mobile centralized panel 4-rolls DUCCI /5 Length mm Central roll diameter mm 220 Lower roll diameter mm 250 Lateral rolls diameter mm 200 Bending thickness mm 5 Pre-bending thickness mm 5 This machine is available equipped with: - Hydraulic translation - Hydraulic rotation - Analogical displays - Electro hydraulic 1
2 3-rolls FOMP /2 Max plate length mm Central roll diameter mm 230 Lateral roll diameter mm 210 Max bending thickness mm 3 Max pre-bending thickness mm 2 The machine is available equipped with: - Upper roll inclination - Profile dies at the end of the rolls 4-rolls SCHIAVI /8 Roll length mm 3100 Upper roll diameter mm 280 Side roll diameter mm 220 Bending thickness mm 10 Pre-bending thickness mm 8 The machine is available equipped with: - hydraulic movement of the rolls - hydraulic rotation - electro-hydraulic controls centralised on fix panel 2
3 3-rolls SERTOM no pre-bending Roll length mm 4150 Upper roll diameter mm 165 Side roll diameter mm 140 The machine is available equipped with: - Hydraulic movement - Hydraulic rotation - Electro-hydraulic controls centralised on mobile panel 3-rolls no pre-bending Rolls Diameter: - Upper Roll:600mm - Lower Rolls:500mm - Roll Length: 3100mm Weight: 55 Ton Bending Capacity: - Thickness: 65mm - Diameter: 4000mm - Width: 3000mm The machine is available equipped with: - Electrical equipment and mobile control panel completely revamped in
4 2-rolls FW Useful length mm 1000 Rotation speed m/l 5 Max. pre-bending thickness mm 3,5 The machine is available equipped with: - Special lower roll lifting system for parallelism and constant pressure against top roll - Motorized lower roll - Centralized electro-hydraulic controls - Hydraulic top roll release controlled from console - Automatic bending cycle for base machine - Forced grease lubrication system. - Spindle pipe support and central ferrule support - Automatic ferrule ejector + unloading system. - Driven adjustment of the lower roll pressure. 2-rolls FACCIN Useful length mm 1500 Rotation speed m/l 5.5 Max. pre-bending thickness mm 0,9 The machine is available equipped with: - Special lower roll lifting system for parallelism and constant pressure against top roll - Motorized lower roll - Centralized electro-hydraulic controls - Hydraulic top roll release controlled from console - Automatic bending cycle for base machine - Forced grease lubrication system. 4
5 Shearing FW BF 3/10 - Max cutting thickness with material having R=37 kg/mm2 mm 10 - Max cutting thickness with material having R=70 kg/mm2 mm 6 - Blades with diameter mm Gap mm Cutting diameter: mm min 600; mm max Cutting speed m/min Installed power HP 20 - Approx weight of the machine kg The price includes: - electrical motor 380V-50HZ-threephase - adjustment key - handbook 3-rolls VERRINA 4 / 120 Max table length: 4080 mm Max bending sheet length: 4000 mm Upper roll diameter: 1100 mm Lower rolls diameter: 650 mm Overall dimensions: - Total height: 7925 mm - Total length: mm - Total width: 5200 mm - Weight approx: 380 ton. Completely refurbished. 5
6 FLANGING MACHINE BF 15/4 Max. flanging thickness mm 15 Max. diameter of head mm Min. head diameter (without extension) mm 800 Max. Knuckle radius mm 300 Min. Knuckle Radius mm 30 Main power consumption Hp 70 Machine approx. weight Kg Machine overall dimensions m 4,5x1,3x3,2 Bottom carriage cylinder underground mm 350 Hydraulic unit overall dimensions m 1,2x1x0,8 Manufacturer FACCIN Manufacturing year
7 MANIPULATOR FOR DISHING PRESS MODEL MA 50 Max. blank Diameter mm Min. blank Diameter mm Max. capacity kg Total power installed HP 25 Blank rotation speed m/min. 25 Up-down speed for support arms m/min. 12 Voltage V 380 Frequency Hz 50 Phases No 3 Electronic control equipment for automatic working cycle. Electronic digital display for support arms stroke. Possibility for synchronized or independent support arms movement. N. 2 motorized rolls for plate rotation. Preset counter for rotation angle. Preset counter for number of pressings in the different positions. MANIPULATOR FOR DISHING PRESS MODEL MA 80 Max. blank Diameter mm Min. blank Diameter mm Max. capacity kg Total power installed HP 50 Blank rotation speed m/min. 25 Up-down speed for support arms m/min. 4 Voltage V 380 Frequency Hz 50 Phases No 3 Electronic control equipment for automatic working cycle. Electronic digital display for support arms stroke. Possibility for synchronized or independent support arms movement. N. 2 motorized rolls for plate rotation. Preset counter for rotation angle. Preset counter for number of pressings in the different positions. 7
8 HYDRAULIC DISHING PRESS SERIES PPM-150/2,5 Pressing power Ton 150 Distance between the uprights mm Fix lower die holder mm 900x900 Mobile upper die holder mm 750x450 Cylinder stroke mm 800 Quick forward speed m/min 8 Compression speed mm/min Quick return speed m/min. 8 Power consumption HP 18 OVERALL DIMENSIONS: Length mm Width mm Total height mm Approx. weight ton 11 Manufacturer FACCIN Manufacturing year 2001 Automatic working cycle Lower die holder with grooves to fix the dies Upper die holder on working cylinder Preparation for automatic manipulator to be fitted later Centralized control console Safety devices for immediate stop of every movement ACCESSORIE INCLUDED - Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm
9 HYDRAULIC DISHING PRESS SERIES PPM-300/3,5 Pressing power Ton 300 Distance between the uprights mm Fix lower die holder mm 900x900 Mobile upper die holder mm 500x500 Cylinder stroke mm 750 Quick forward speed m/min 8 Compression speed mm/min Quick return speed m/min. 8 Power consumption HP 75 OVERALL DIMENSIONS: Length mm Width mm Total height mm Approx. weight ton 28 Manufacturing year 2006 Italy by FW Automatic working cycle Lower die holder with grooves to fix the dies Upper die holder on working cylinder Preparation for automatic manipulator to be fitted later Centralized control console Safety devices for immediate stop of every movement ACCESSORIE INCLUDED - Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm 550 9
10 HYDRAULIC DISHING PRESS SERIES PPM-500/5,5 Pressing power Ton 500 Distance between the uprights mm Fix lower die holder mm 1.200x1.200 Mobile upper die holder mm 950x650 Cylinder stroke mm 800 Quick forward speed m/min 8 Compression speed mm/min Quick return speed m/min. 8 Power consumption HP 100 OVERALL DIMENSIONS: Length mm Width mm Total height mm Approx. weight ton 52 Manufacturer FACCIN Automatic working cycle Lower die holder with grooves to fix the dies Upper die holder on working cylinder Preparation for automatic manipulator to be fitted later Centralized control console Safety devices for immediate stop of every movement ACCESSORIE INCLUDED - Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm Set of dies Radius mm
11 4-rolls FACCIN 3 / Max plate length mm Distance between uprights mm Number of rolls FOUR Upper central roll diameter mm 530 Side rolls diameter mm 430 Installed power HP 100 Rotation speed m/1' 2-4 Hydraulic front bearing tilting speed mm/1 450 Hydraulic tilting of top roll mm/1 250 Machine weight Kg GUARANTEED PERFORMANCES : Maximum bending thickness (full length) mm 48 Maximum pre-bending thickness (full length) mm 42 Rolling radius mm 1400 Material yield strength N/mm2 280 Maximum bending thickness (full length) mm 40 Maximum pre-bending thickness (full length) mm 36 Rolling radius mm 500 Material yield strength N/mm2 280 The machine is equipped with: Electronic conical bending device from mobile control console Rolls normalized, induction hardened, stress relieved and polished Top central ferrule support (single axes) with special design to support cones Side Support Numerical Control series CNC/PGS 11
12 BEVELLING MACHINE Main features of the bevelling machine mod Italy Max dimensions of the finished part, mm: length mm width mm height 200 mm Number of hydraulic sheet holders N.14 Number of manual sheet holders N.3 Number of tool holding carriages N.2 Set of forwarding tool holding carriages for a whole stroke of the carriage itself, mm Set of carriage speed with tool holding carriages (adjustment in continuous), m/min 4-40 Max torque on the driving gear of the carriage kn 60 Overall dimensions of the machine 7814, mm: length mm width mm height mm Weight of the machine kg 12
FOR GLOBAL SALES AND SERVICE, PLEASE CONTACT US
FOR GLOBAL SALES AND SERVICE, PLEASE CONTACT US 3901 W DALLAS ST. BROKEN ARROW, OKLAHOMA 74012 U.S.A. E-mail: sales@sigmafab.com Phone: +1-918-230-6157 Skype: globalman122 Co. Me. srl Under the trade name
More informationJTW-SERIES MACHINE SCREW JACK
J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jactonjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com SERIES MACHINE
More informationBASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) 91-97802-00007, 9315-11111 info@basantgroup.com www.basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS
More informationPressing forces - Table Air bending/bottoming
Press Brakes GP Tool Systems Bending tools in combination with a high-precision metal forming machine are the backbone of sheet metal bending part production. Weinbrenner tools deliver machining quality
More informationSeries SSG - Compressing & stretching device for the Use in the workshop and construction zone
Compressing and stretching devices Series SSG - Compressing & stretching device for the Use in the workshop and construction zone To manufacture wheel arches, window frames, rain profiles or door edges
More informationMechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines
Mechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines About us The 64 years of history and know-how have turned us on an recognized presses manufacturer supported
More informationUKB-System L. Type LVD
UKB-Sstem L Tpe LVD..... Explanation punches/top-tools and dies. 2 3 Punches/top-tools Punches/top-tools. 1 26 Punch/top-tool. 1 Holder for changeable 86 /84 /28 blades. Holder for radius-tools R 7,0-0,0.
More informationPPED SERIES. Hydraulic press brakes LVDGROUP.COM ACCURATE, ECONOMICAL BENDING
Hydraulic press brakes PPED SERIES ACCURATE, ECONOMICAL BENDING LVDGROUP.COM 2 # PPED SERIES PPED SERIES ACCURATE, ECONOMICAL BENDING Practical and easy to use, PPED press brakes are ideal for a wide range
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationNUMOREX NXB ESAB CUTTING SYSTEMS. Flexibility, Durability, Reliability ESAB,YOUR PARTNER IN WELDING AND CUTTING. Machines
ESAB CUTTING SYSTEMS NUMOREX NXB Flexibility, Durability, Reliability Machines Processes Numerical Controls Programming Environment ESAB,YOUR PARTNER IN WELDING AND CUTTING. ESAB NUMOREX NXB The NUMOREX
More informationPRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES
PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES A Tradition of Quality and Value since 1899 DREIS & KRB MP
More informationAccessories Catalogue
Accessories Catalogue GEKA ACCESSORIES Since 1919, GEKA Group has been manufacturing Ironworkers for angle work, flats and profiles - for black iron, metal workshops, metal constructions, telecommunication
More information20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line
20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line GENERAL SPECIFICATIONS: Coil weight: 20,000 lbs. maximum Coil width: 24" - 48" Coil O.D.: 60" maximum Material type: Electro-Galvanized
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationBridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
More informationPLATE ROLLS. It s difficult to compete in today s world with yesterday s technology. We have solutions.
PLATE ROLLS It s difficult to compete in today s world with yesterday s technology. We have solutions. JMT machines are built by the largest volume fabrication machine tool producer and the most respected
More informationK Used overhauled. FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm;
grinding technologies SPECIAL OFFERS June 2018 K250 2100 FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm; PLC; Angular divisor +/-90 : Inversion
More informationTechnical Information TI-B10 Safety Brakes type KSP. 2 Function. Contents
Technical Information SITEMA - Safety Brakes English translation of German original TI-B0-EN-0/0 Technical Information TI-B0 Safety Brakes type KSP High holding force by self-intensifying clamping Secure
More informationGROTNES ROTARY ROLL FORMING MACHINE TOOLS
GROTNES ROTARY ROLL FORMING MACHINE TOOLS 2 1965 GROTNES MACHINE WORKS, INC. The forming rolls (tooling) are mounted on parallel spindles powered by a hydrostatic drive. In general the upper spindle (A)
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears Sheet Metal. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More information40T 1-PILLAR SWAGER TALURIT SYSTEM. Handy Swager with lots of power in a compact format!
40T 1-PILLAR SWAGER TALURIT SYSTEM Handy Swager with lots of power in a compact format! Portable Powerful Economical Versatile Reliable User friendly Short process cycle time Automatic shut down Environmentally
More informationAdding performance to the industry. Widest Range of Machines installed with proven performance AN ISO 9001:2000 CERTIFIED COMPANY.
Adding performance to the industry We at Energy Mission believe to deliver high quality products at competitive price supported by best service support. To achieve this mission, we have developed inhouse
More informationSALVAGNINI TOOLING AFAB MACHINERY AND TOOLS LTD
SALVAGNINI TOOLING AFAB MACHINERY AND TOOLS LTD CLAMPS SHAPE ANGLE DIRECTION SHAPE POSITION AT SHEET METAL FROM TOP OF MACHINE SHAPE ANAGLE AT 0 SHAPE ANAGLE AT 90 PUNCH TIP TYPE Whisper Rooftop Inverted
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationFASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030
SERIES 5025 6030 7530 10030 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes &
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationGRINDING TECHNOLOGIES
GRINDING TECHNOLOGIES SPECIAL OFFERS July 2018 SX80 Robust cast-iron main machine housing; All gears housed in an oil bath (10 kg). Vibration-free band saw movement; Sensitive controls for high precision
More informationThe Winning Force HRB SERIES. Plate Roll Bending MRB & MRB-S SERIES. Motorised Plate Roll Bending. Strong Precise Efficient Fast High Repeatability
The Winning Force HRB SERIES Plate Roll Bending MRB & MRB-S SERIES Motorised Plate Roll Bending Strong Precise Efficient Fast High Repeatability 1 2 The Winning Force As a total supplier for sheet metal
More informationproduct catalog 800 FORM911 ( ) durmausa.com DURMA
product catalog Better Parts Better profits 800 FORM911 (367-4911) durmausa.com HD-F/l Series lasers standard equipment Siemens 840D CNC Controller Laser source (Resonator) High pressure cutting option
More informationBending, punching, shearing & plasma cutting
Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices
More informationBending, punching, shearing & plasma cutting
Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices
More informationMADE IN ITALY. Automatic bridge saws. Champion 50&60
MADE IN ITALY Automatic bridge saws Champion 50&60 Champion 50&60 Champion 50 & 60 bridge saws Following the success of Prussiani Engineering CHAMPION bridge saws, the only patented ones, to meet the needs
More informationSTANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching
More informationRODLESS MECHANICAL CYLINDERS
RODLESS MECHANICAL CYLINDERS RODLESS MECHANICAL CYLINDRES WITH BALL-SCREW DRIVE, CMH CMH: A rodless cylinder whose carriage is positioned by the movement of nuts attached to a baliscrew. Each carriage
More informationCenterless Grinders. ECG series
Centerless Grinders ECG series COMPANY PROFILE GRINDING APPLICATIONS e-tech Machinery is a world class machine tool builder that strives to produce and service various kinds of grinding machines, with
More informationHYDRAULIC. IRONWORKERS SW-Series
HYDRAULIC IRONWORKERS SW-Series IRONWORKERS Every Machine Has 5-Station Versatility Built In Station Baileigh Industrial offers the highest quality Ironworkers on the market today. Our 50 ton, 62 ton,
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationTS / TSX. TS / TS(X) Hydraulic guillotine shears. For Impressive Performances
TS / TSX TS / TS(X) Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 AUTO BLADE GAP HYDRAULICS AND RAKE ANGLE All HACO shears are recognised for being well-built, accurate and costeffective,
More informationTRUMPF TRUBEND CNC press brake. Modell TRUBEND 5230 Year of manufacture 2010 Control TRUMPF TASC 6000
TRUMPF TRUBEND 5230 CNC press brake Manufacturer TRUMPF Modell TRUBEND 5230 Year of manufacture 2010 Control TRUMPF TASC 6000 Machine number Press force Length of bend B0507A0231 2.300 kn 3.230 mm KISTNER
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationPoints of strength. 63F, availability of two drilling heads, with possibility fo horizontal and vertical drilling devices.
CNC GIOTTO 1 Points of strength Technology EASY USE, easy to use and simple to MOUNT TOOLS Machine ready for use and complete with standard tool support store and CAD station Suction cups made of aluminium
More informationself locking jack screw driven scissor mechanism
self locking jack screw, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore Custom material handling and lifting solutions with hydraulically,
More informationFAMUP LINEARMILL 600 EM. 5-axis universal machining center
FAMUP LINEARMILL 600 EM 5-axis universal machining center The machine The technology Machine layouts With 5 sided-machining into the future Technical data LINEARMILL 600 EM Working range Positioning stroke
More informationCoated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationMatrite Rolla-V ROLLERI ROLLA-V ONYX DIES. Prisme abkant cu umeri rabatabili Rolleri ROLLA-V. Content Explanation Model
Prisme abkant cu umeri rabatabili Rolleri ROLLA-V ROLLERI Content Explanation 202-203 Model 1 204 Model 2 205 Model 2.5 205 Model 3 206 Model 4 206 Adjustable Dies 207 Hemming and Joggle Tools 207 Matrite
More informationServo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationSheet Metal Forming Presses
Sheet Metal Forming Presses October 15th, 2014 Hyunok Kim, EWI Forming Center Taylan Altan, OSU - Center for Precision Forming (CPF) 1 Outline Introduction Classification of presses Mechanical press Hydraulic
More informationCover Plate Closures. Gaskets for Self-Sealing Cover Plate Closures. Graphite Cover Plate Gaskets. Double-Cone Gaskets.
Gaskets for Self-Sealing Cover Plate Closures Graphite Cover Plate Gaskets Double-Cone Gaskets Delta-Gaskets Gaskets for Self-Sealing Cover Plate Closures Gaskets for Self-Sealing Cover Plate Closures
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationTS / TSX. TS / TS(X) Hydraulic guillotine shears Sheet Metal. For Impressive Performances
TS / TSX TS / TS(X) Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 All HACO shears are recognised for being well-built, accurate and costeffective, meeting the demand
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationRepair Manual and Spare Parts List
Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents. Technical Information
Technical Information SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure TI-P1-EN-0/016 English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould
More informationCMT ELECTRO-HYDRAULIC SYNCHRONIZED CNC PRESSBRAKE PBH SERIES
PBH SERIES PBH Series Electro-hydraulic Synchronized CNC Pressbrake Streamlined design, high speed, high precision, high rigidity CNC sheet metal pressbrake Electro hydraulic servo system, full loop controlling
More informationMOTORIZED SLIP BENDING ROLLS 134 / 136
MOTORIZED SLIP BENDING ROLLS 134 / 136 The motorized slip bending rolls 134 and 136 Prerolling and final rolling in one machine - thanks to its special roll concept, wide range of accessories and robust
More informationKS Back from exhibition
grinding technologies SPECIAL OFFERS April 2018 KS250-1500 FEATURES: PLC Siemens touchscreen; Rotating magnetic chuck +/-90 ; Grinding motor 7,5 kw (10 HP); Segment holding ring Ø250; Quick change of the
More informationK Used FEATURES:
grinding technologies SPECIAL OFFERS November 2017 K250 3100 Used FEATURES: Rotating magnetic chuck width 150mm from 0 to 90 ; Angular divisor for magnetic chuck; Grinding motor 7,5 kw (10 HP); Segment
More informationCNC HYDRAULIC PRESS BRAKE HPS SERIES OPTIMUM ACCURACY MACHINE CONFIGURATION TABLE CROWNING SYSTEM
HPS SERIES CNC HYDRAULIC PRESS BRAKE OPTIMUM ACCURACY Linear encoder for ram position measuring CONTROL TECHNOLOGY Two linear encoder (Y1-Y2) are mounted on two sides of machine, they measure the exact
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationDYNA-PRESS SERIES. Electric press brakes LVDGROUP.COM FAST, ACCURATE AND FLEXIBLE BENDING
Electric press brakes DYNA-PRESS SERIES FAST, ACCURATE AND FLEXIBLE BENDING LVDGROUP.COM The Dyna-Press is your perfect bending partner. 24 ton DYNA-PRESS SERIES FAST, ACCURATE AND FLEXIBLE BENDING The
More informationDie changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
More informationAD-SERVO HYBRID PRESS BRAKES
AD-SERVO HYBRID PRESS BRAKES It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT machines
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationProduct Brochure For K058. Description. Features. Auckland: (09)
HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears SANDFELD A/S BIRKEGÅRDSVEJ HERNING
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationReference. Supplier of results. Pole forming technology
Reference Supplier of results Pole forming technology Machines Supplier of results STREET POLES Machinery ROUNDED CONICAL POLYGONAL Tridem / Quadro No Foundation! No Special transport! Fast Time for installation!
More informationTooth thickness Dedendum. Addendum. Centre distance Nominal
FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationThe Winning Force HRB SERIES. Plate Roll Bending MRB & MRB-S SERIES. Motorised Plate Roll Bending. Strong Precise Efficient Fast High Repeatability
The Winning Force HRB SERIES Plate Roll Bending MRB & MRB-S SERIES Motorised Plate Roll Bending Strong Precise Efficient Fast High Repeatability 1 The Winning Force As a total supplier for sheet metal
More informationGEZE PERKEO AND LINEAR GUIDES
CONTENTS GEZE PERKEO door systems PERKEO 75 sizes 1, 2, 3 4 Standard installation 5 PERKEO 75 sizes 1, 2, 3 Ordering information 6 PERKEO 75 Type 14/ Type 14a 7 PERKEO sizes 1, 2, 4 8 Standard installation
More informationAD-S SERIES PRESS BRAKES DURMA
AD-S SERIES PRESS BRAKES BETTER PARTS BETTER PROFITS Durma press brakes guarantee precision, low maintenance and operating costs, as well as long-term reliability. These features along with large investments
More informationPBT. CleanBend RESPECT SUPPORT INSPIRE CLEANBEND FORMING TECHNOLOGY. European Precision Style Wila Trumpf Style American Precision Style
PBT PN CleanBend RESPECT SUPPORT INSPIRE CLEANBEND FORMING TECHNOLOGY European Precision Style Wila Trumpf Style American Precision Style 2 TABLE OF CONTENTS Mate CleanBend Forming Technology Helpful CleanBend
More informationCUBIC SCREW JACKS. Features & Benefits. Specifications
CUBIC SCREW JACKS Features & Benefits Versatile Mounting - Unit can me mounted upright or inverted Clean surface - Easy to maintain in dirty environments Contemporary design for improved aesthetics Fast
More informationTotal sheet metal working.
202 Total sheet metal working. There is barely any field of application for which FEIN power cutting tools do not offer the perfect solution. They cut through metal, metal alloys, non-ferrous metals and
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationHACO Q-SERIES FOR IMPRESSIVE PERFORMANCES. Q5, Q4, Q3 CNC Punching Machines Sheet Metal. For Impressive Performances
HACO FOR IMPRESSIVE PERFORMANCES Q-SERIES Q5, Q4, Q3 CNC Punching Machines Sheet Metal WWW.HACO.COM For Impressive Performances 1 Q5: SO MUCH MORE THAN JUST A PUNCH PRESS With its 22 or 30 ton high -speed
More informationAutomated Welding Systems KOREAWELD
www.koreaweld.com Automated Welding Systems KOREAWELD 2 Automated Welding... PRODUCT LIST. 4 5 6 7 8 9 10 11 12 13 14 15 16 KW-FF1 FILLET WELDER, FLOOR DRIVING, ONE TORCH, STITCH & CONTINOUS KW-FF1B FILLET
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationGEZE DOOR TECHNOLOGY GEZE PERKEO AND LINEAR GUIDES THE BALL BEARING SLIDING DOOR SYSTEM FOR EXTREMELY DURABLE, PRECISE GUIDES BEWEGUNG MIT SYSTEM
GEZE DOOR TECHNOLOGY THE BALL BEARING SLIDING DOOR SYSTEM FOR EXTREMELY DURABLE, PRECISE GUIDES BEWEGUNG MIT SYSTEM CONTENTS GEZE PERKEO door systems PERKEO 75 sizes 1, 2, 3 4 Standard installation 5
More informationBEVELLING MACHINES WELDING CARRIAGES
BEVELLING MACHINES WELDING CARRIAGES 2013 CATALOGUE www.trademastertools.com 1 BEVELLING MACHINES page 4 BM21 PORTABLE BEVELLER BM21S STAINLESS STEEL BEVELLER Single milling head with 10 indexable inserts
More informationHACO Q-SERIES FOR IMPRESSIVE PERFORMANCES. Q5, Q4, Q3 CNC Punching Machines Sheet Metal. For Impressive Performances
HACO FOR IMPRESSIVE PERFORMANCES Q-SERIES Q5, Q4, Q3 CNC Punching Machines Sheet Metal For Impressive Performances 1 Q5: SO MUCH MORE THAN JUST A PUNCH PRESS With its 22 or 30 ton high -speed hybrid servo
More informationMODERN TECHNOLOGY IN PUNCHING AND SHEARING
MODERN TECHNOLOGY IN PUNCHING AND SHEARING SOLUTION The GEKA HYDRACROP range of hydraulic steelworkers have been designed by highly experienced engineers with the support of powerful CAD equipment, culminating
More information7440 w. 100th Pl. Bridgeview, IL Phone (708) FAX # (708) th Edition
7440 w. 100th Pl. Bridgeview, IL. 60455 Phone (708) 430-0795 FAX # (708) 430-0978 WWW.RITEWAYBRAKEDIES.COM 4th Edition Air Craft Tooling...33, 34 30 Punches & Dies...6 90 Punches & Dies...3, 4, 5 Adapters...24,
More informationTechnical Features. MEC-80x440x800 CNC
Technical Features MEC-80x440x800 CNC Technical features 2 AUTOMATIC AXES AND 1 MANUAL. Thanks to the electronic control systems of last generation that have been incorporated in this model for two of
More informationBending table FIGURE 01
TOOLING CATALOGUE Bending table FIGURE 01 V = die-opening B = minimum of the leg for a bending angle α = 90 Ri = internal radius of the bend F = required bending force in tonnage per meter bending S =
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationSection X STEERING DATA AND SPECIFICATIONS. 21 degrees 45 minutes -f- or 1 degree (inner wheel when outer wheel is 20 degrees)
76 Section X DATA AND SPECIFICATIONS MODELS MC-1 MG-2 MC-3 MY-1 Steering Type Manual Power Worm and Three Tooth Roller None None None Rack and Gear Sector, Recirculating Ball Nut Ratio Manual 20.4... Power
More informationQ-SERIES. Q5, Q4, Q3 CNC Punching Machines Sheet Metal. For Impressive Performances
Q-SERIES Q5, Q4, Q3 CNC Punching Machines Sheet Metal WWW.HACO.COM For Impressive Performances 1 Q5: SO MUCH MORE THAN JUST A PUNCH PRESS With its 22 or 30 ton high -speed hybrid servo hydraulic punching
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1352 DESIGN OF TRANSMISSION SYSTEMS Year/Sem: III / VI UNIT-I (Design of transmission systems for flexible
More information