[15.2] .5 [12.7] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 1.62 [41.1] PART NUMBER
|
|
- Roxanne Wilkinson
- 5 years ago
- Views:
Transcription
1 LABEL PART PER SPEC A [15.2] 4X.56 ±.045 [14.2 ±1.14] NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETRES ALL DIMENSIONS ARE FOR REFERENCE ONLY (4) GROOVES ACCEPT SAE 1/2" BELTS M10 X 1.5-6H THRU 3.75 [95.3].50 [12.7] [154.4] DIA B DIA A.62 [15.7] TYP..76 [19.3] FOR DETROIT DIESEL SERIES 60 ENGINE XX DIM C APPROXIMATE WEIGHT: 35 LBS [231.6] (4) GROOVES ACCEPT SAE 1/2" BELTS 1/8-27NPTF (AIR CONNECTION).50 [12.7] 1.62 [41.1] PART NUMBER [67.6] 5.32 [135.1] DIA 6.17 [156.7] 8.00 [203.2] 1.56 [39.6] 1.50 [38.1] [177.8] 9.13 [231.9] 6.62 [168.1] [156.7] 9.12 [231.6] 5.50 [139.7] 32 LB.6 [15.2] M10 X 1.5-6H THRU.5 [12.7] A DIA 9.12 [231.6] [254.0] B 4X.56 ±.045 [14.2 ±1.14] DIM 5.67 [144.0] C WEIGHT 5.67 [144.0] 32 LB 35 LB 37 LB 3.75 [95.3] 6.08 [154.4] 1.56 [39.6] 7.00 [177.8] 1.50 [38.1] 1/8-27NPTF (AIR CONNECTION) FOR DETROIT DIESEL SERIES 60 ENGINE [15.7] TYP.76 [19.3].5 [12.7] 1.62 [41.1] 2.66 [67.6] 5.32 [135.1] 5.50 [139.7] 139
2 APPROXIMATE WEIGHT: 29 LB.6 [15.2] 4X.56 ±.045 [14.2 ±1.14] (4) GROOVES ACCEPT SAE 1/2" BELTS M10 X 1.5-6H THRU 3.75 [95.3].5 [12.7] 6.08 [154.4] 9.13 [231.9] 1.56 [39.6] 5.75 [146.1].62 [15.7] TYP..76[19.3] 5.18 [131.6] NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETERS (4) GROOVES ACCEPT SAE 1/2" BELTS.6 [15] 1/8-27NPTF (AIR CONNECTION).5 [12.7] 1.62 [41.1].50 [12.7] M10 X 1.5-6H THRU 2.66 [67.6] 5.32 [135.1] 4X.56 ±.045 [14.2 ±1.14] 1.50 [38.1] FOR DETROIT DIESEL SERIES 50 ENGINE [95.3] 6.08 [154.4] 9.00 [228.6] 7.00 [177.8] 1.56 [39.6] 1.5 [38] 1/8-27NPTF (AIR CONNECTION).62 [15.7] TYP..76 [19.3] 5.28 [134.1].50 [12.7] 1.62 [41.1] 2.66 [67.6] 5.32 [135.1] FOR DETROIT DIESEL SERIES 60 ENGINE
3 NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS..6 [15] 4X.56 ±.045 [14.2 ±1.14] M10 X 1.5-6H THRU (4) GROOVES ACCEPT SAE 1/2" BELTS.5 [13] 3.75 [95.3] 6.08 [154.4] 8.00 [203.2] 7.25 [184.2] FOR DETROIT DIESEL SERIES 60 ENGINE (4) GROOVES ACCEPT SAE 1/2" BELTS 8.00 [203.2] 2X.62 [15.7].76 [19.3] 6.77 [172.0] 1.62 [41.1] NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS [184.2].5 [13].6 [15.2] 1/8-27 NPTF (AIR CONNECTION).5 [12.7] 4X.56 ±.045 [14.2 ±1.14] 5.32 [135.1] 2.66 [67.6] M10 X 1.5-6H THRU 3.75 [95.3] 1.56 [39.6] 1.50 [38.1] 6.08 [154.4] 1.56 [39.6] 1.50 [38.1] 1/8-27 NPTF (AIR CONNECTION).62 [15.7].5 [12.7] 2.66 [67.6] FOR DETROIT DIESEL SERIES 60 ENGINE [19.3] 1.62 [41.1] 5.32 [135.1] 5.98 [151.9] 141
4 .6 [15] 4X.56 ±.045 [14.2 ±1.14] (4) GROOVES ACCEPT SAE 1/2" BELTS M10 X 1.5-6H THRU 3.75 [95.3].5 [13] 6.08 [154.4] 8.00 [203.2] 7.25 [184.2] 2X.62 [15.7] TYP..76[19.3] 6.57 [166.9] NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS (3) GROOVES ACCEPT SAE 1/2" BELTS.6 [15].5 [13] 4.2 [107] 1/8-27NPTF (AIR CONNECTION).5 [13] 1.62 [41.1] 2.66 [67.6] 5.32 [135.1] 4X.560 ±.045 [14.2 ± 1.14] M10 X 1.5-6H THRU 1.56 [39.6] 1.50 [38.1] FOR DETROIT DIESEL SERIES 60 ENGINE [95.3] 6.08 [154.4] 1.56 [39.6] 5.75 [ 146.1] 1.50 [38.1] 1/8-27 NPTF (AIR CONNECTION).5 [13] 2.38 [60.5] 2X.62 [15.7] 5.32 [135.1] 2.66 [67.6] FOR DETROIT DIESEL SERIES 60 ENGINE [131.6] END OF HUB 142
5 LABEL PART PER SPEC A [15.2] 4X.56 ±.045 [14.2 ±1.14] NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETRES FOR DETROIT DIESEL SERIES 60 ENGINE M10 X 1.5-6H THRU 3.75 [95.3] (4) GROOVES ACCEPT SAE 1/2" BELTS.50 [12.7] 6.08 [154.4] 6.17 [156.7] A DIA.62 [15.7] TYP..76 [19.3] 5.67 [144.0] (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT 1/8-27NPTF (AIR CONNECTION).50 [12.7] 1.62 [41.1] LABEL PART PER SPEC A [67.6] 5.32 [135.1] NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETRES 0.38 [9.7] 45 (4) SLOTS.49 [12.4] WIDE ON 4.5 [114.3] BOLT CIRCLE 1.56 [39.6] 1.50 [38.1] 0.5 [12.7] B 1.26 [32.0] FOR CUMMINS L-10 AND N-14 ENGINES XX PART NUMBER /8-27NPTF AIR SUPPLY DIA A 5.00 [127.0] 6.00 [152.4] 5.00 [127.0] 6.00 [152.4] B 3.29 [83.6] 3.29 [83.6] 3.70 [93.9] 3.70 [93.9] APPROXIMATE WEIGHT 10 LB. 11 LB. 11 LB. 12 LB [158.0] 3.61 [91.7] 13 LB
6 NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETERS. (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT (4) SLOTS.49 [12.4] WIDE ON 4.5 [114.3] BOLT CIRCLE LABEL PART PER SPEC A [158.8] [83.6] 1.26 [32.0] 0.5 [12.7] 0.38 [9.7] 45 1/8-27NPTF AIR SUPPLY FOR CUMMINS ISM ENGINE XX 144
7 FOR CAT 3406 ENGINE XX Cat 3406 Engine
8
9 outline not available A B C D XX 147
10 NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS. APPROXIMATE WEIGHT: 19 LBS 6X 3/8-16UNC-2B ON A 3.50 [88.9] BOLT CIRCLE 1.00 [25.4] FULL THREAD MINIMUM (1) GROOVE ACCEPTS SAE 1/2" BELT (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT.4 [10] [50.5] 7.50 [190.5] 7.75 [196.9] 5.00 [127.0] 2.00 [50.8] 4X M12 X H 7.75 [196.9] 7.50 [190.5] 1.99 [50.5] 1.16 [29.5] 2.32 [58.9] 1.00 [25.4] 3.00 [76.2].27 MAX [6.9] 1 GROOVE ACCEPTS SAE 1/2" BELT (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT 4.30 [109.2] END OF HUB.7 [18] 1.08 [27.4] 2.56 [65.0] FOR CAT 3176 ENGINE NOTE: DIMENSIONS IN [mm] ARE IN MILLIMETERS A 3.00 [76.2] 2.00 [50.8] 5.00 [127.0].27 [6.9] MAX 2.84 [72.1] [17.8] 1.08 [27.4] 1.00 [25.4] 1.16 [29.5] 2.32 [58.9] FOR CAT 3176 ENGINE M12 X H (4) PLACES [109.2] A 148
11 [65.07] [65.02] FEMALE PILOT 2.10 [53.3] CLEARANCE REQUIRED FOR NUT NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS. APPROXIMATE WEIGHT: 6X 3/8-16UNC-2B ON 3.50 [ON 88.9] BOLT CIRCLE 1.00 [25.4] MIN FULL THREAD 21 lbs. (1) GROOVE ACCEPTS SAE 1/2" BELT (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT 1/8-27NPTF (AIR CONNECTION).4 [10] [196.9] 7.50 [190.5] [127.0] 2.00 [50.8] 4X M12 X H FOR CAT 3176 ENGINE [29.5] 2.32 [58.9] 1.00 [25.4] 3.00 [76.2] 3.40 [86.4] END OF HUB.7 [18] 1.08 [27.4] 2.56 [65.02]
12 78.93 OVER.437 PINS END OF HUB OVER.098 PINS EFFECTIVE (1) GROOVES ACCEPT SAE 1/2" BELT.709±.098 KENWORTH FOR USE ON C10/12 ENGINE (8) GROOVES ACCEPT POLY "V" PK-SECTION BELT 150
13 A 6.08 [154.4] 7.64 [194.1] 1.50 [38.1] [135.1] 0.28 [7.1] R [68.8] /8-16UNC-2B.68 MINFULLTHREA DEPTH (6) HOLESEQUALLYSPACED ON 3.50 B.C [254.0] ±.001 [50.72 [±.02] FOR-01 ONLY (4) GROOVESACCEPT SAE1/2" BELTS. A 3.07 [78.0] VIEW M10 x 1.5 6H THRU 3.00 [76.2] 1.50 [38.1] 0.50 [12.7] A-A 8.00 [203.2].24 [6.1] FOR-01 ONLY 1/8-27NPTF GREASECONN. (PLUGGED) FORTHE-02 ONLY.6 [15.2] 2.561/2.562 [65.05/65.07] FEMALEPILOT,2.10 [53.3] CLEARANCEREQ'DFORNUT FORTHE-02 ONLY 1.62 [41.2] 2.38 [60.5] 5.66 [143.8] 3.00 [76.2] 3.62 [91.9] FOR DETROIT DIESEL SERIES-60 ENGINE
14 XX
15
16
17
18
19 XX XX 157
20
21
22 1.00 [25.4] 3.35 [85.1].7 [17.8] NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS APPROXIMATE WEIGHT: 23 LBS.53 THRU [13.5] 2 GROOVES ACCEPT SAE 7/8" BELTS.50 [12.7] x.19 [4.8] DIMPLE R 3.23 [82.0].56 [14.2] 7.72 [196.1] [178.6] 1.99 [50.5].27 [6.9] MAX 5.46 [138.7] 35 FOR CUMMINS N14 ENGINE A
23
24
25 4.20 [106.7] 1.96 [49.8] 4X.53 [13.5] NOTE: DIMENSIONS IN [mm] ARE IN MILLIMETERS. APPROXIMATE WEIGHT: 28 LBS 0.6 [15.2] (6) GROOVES ACCEPT POLY-V "K" SECTION BELT 1.34 [34.0] (10) GROOVES ACCEPT POLY-V "K" SECTION BELT 3.76 [95.5] 6.81 [173.0] 6.18 [157.0] 1.99 [50.5].27 [6.9] MAX. FOR NAVISTAR SERIES TRUCK WITH DD S-60 ENGINE a 5.36 [136.1] 1.56 [39.6] 2X.56 ±.045 [14.2 ±1.14] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 5.32 [135.1]
26 .49 [11.7] [149.9]
27 3.58 [90.9].91 [23.1] 1.32 [33.5].20 [5.1] 1.67 [42.4] DIMENSIONS IN [mm] ARE IN MILLIMETERS. APPROXIMATE WEIGHT: 34 lbs [141.0] 1.57 [39.9] 3X.53 [13.5] THRU M H.71 [18.0] MIN. FULL THREAD 1.22 [31.0].46 [11.7].67 [17.0] [50.72] 6.22 [158.0] 2.76 [70.1] 5.90 [149.9] (10 ) FOR NAVISTAR SERIES TRUCK WITH CUMMINS L-10 ENGINE a (4.24 [107.7]) APPROXIMATE ADJUSTMENT 4.00 [101.6] 2.00 [50.8] 8.52 [216.4] END OF HUB (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT
28 XX 166
29
30 (8) GROOVES ACCEPT "POLY-V" K-SECTION BELT 6.22 [158.0] 1.26 [32.0].5 [12.7] NOTE: DIMENSIONS IN [mm] ARE IN MILLIMETERS (4) SLOTS.51 [13.0] WIDE ON 4.50 [ON 114.3] BOLT CIRCLE R 2.67 [67.8] [132.8] 1/8-27NPTF (AIR CONNECTION) FOR CUMMINS M11 ENGINE A 168
31
32
33
34
35
36 [215.9] 8.50 [215.9] 6.72 [170.7] 6.31 [160.3] XX 174
37 NOTE: DIMENSIONS IN [XX] ARE IN MILLIMETERS.8 [20] 5.00 [127.0] (2) GROOVES ACCEPT SAE 1/2" BELTS 2.50 [63.5].50 [12.7].560 ±.045 [14.2 ± 1.14] 2.25 [57.2] M10 X 1.5-6H THRU (2) GROOVES ACCEPT SAE 11/16" BELTS 1.12 [28.4] (6) 3/8-16UNC THRU HOLES.37 [9.4] 8.00 [203.2] 1/8-27NPTF R CONNECTION [47.8] 4.50 [114.3] 6.13 [155.7] 9.00 [228.6].62 [15.7].66 [16.8].75 [19.1] 5.53 [140.5] END OF HUB 2.31 [58.7] 1.2 [30] 7.50 [190.5] AI
38 3/8-16UNC-2B (6) HOLES EQUALLY SPACED ON 3.50 [ON 88.9] BOLT CIRCLE 1.00 [25.4] MIN FULL THREAD.53 [13.5] 2 HOLES NOTE: DIMENSIONS IN [mm] ARE IN MILLIMETERS. APPROXIMATE WEIGHT: 25 LB.27 [6.9] MAX 5.18 [131.6] 4.20 [106.7] 1.96 [49.78] 5.32 [135.1] 2.16 [54.9] 5.32 [135.1].22 [5.6].56±.045 [14.2±1.1] 2 SLOTS 6.81 [173.0] 6.18 [157.0] 1.99 [±50.5] (10) GROOVES ACCEPT POLY-V "K" SECTION BELT (6) GROOVES ACCEPT POLY-V "K" SECTION BELT.6 FOR NAVISTAR SERIES TRUCK WITH DD S-60 ENGINE A
39
40
41
Eaton Char-Lynn Spool Valve Hydraulic Motors
B-5 Eaton Char-Lynn Spool Valve Hydraulic Motors Spool Valve: J, H, S, T, W Series B-1 B-3 B-4 Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i
More information50 Gear Drive - Shaft Output
Performance Ratings General Dimensions for Flanged Gear Drive Mounting (ordering option 'A') General Dimensions for Flanged Quick Eccentric Gear Drive Mounting (ordering option 'AQ') 5 11.00 (279,4). MOUNTING
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE High Performance in an Economical Package International BMG series motors are economical efficient compact units designed for medium duty applications requiring smooth control of shaft
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationS Series (103-) Highlights
S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationS Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationH Series. HECO Interchange Series Power Wheel. Planetary Gear Drive
H Series HECO Interchange Series Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Auburn Gear, Inc. versus HECO - Gear and Bearing Ratings Comparison 4-5 Model 6 Center Flange Shaft Output Drives
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationStatic O-Ring Reference
63 Static Reference Industrial Static Seal Glands Male Gland Female Gland 1/2 E 1/2 E B1 Dia. (B1 Min = A Max. 2L Max.) B Dia. C Dia. D Dia. A Dia. A1 Dia. (A1 Max. = B Min. 2 L Max.) (e) 0 5 (TYP.) 32
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More informationPERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationFAN CLUTCH GUIDE. Save Time & Money! With the Ultimate Fan Clutch Rebuild Kit POST-2001 SPRING ENGAGED. K Fan Pilot
18 Order NLINE www.midwestwheel.com CATALOG NUMBER FAN CLUTCH GUIDE POST-2001 SPRING ENGAGED Save Time & Money! With the Ultimate Fan Clutch Rebuild Kit Highest Torque Rating With over 5,000 inch-pounds
More informationModuflow Series IL2/RF2/CF2 Low Pressure Filters
IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available
More information7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationSAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationDOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
More informationWhite House Products Ltd
White House Products Ltd Issue 5 - Section 23 To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the
More information200 SERIES 220/280 SERIES. Planetary GEAR BOXES 500 SERIES CATALOG PGB SERIES 6000/10000 SERIES 2500/2520 SERIES
2 SERIES 22/28 SERIES Planetary GEAR BOXES 5 SERIES CATALOG PGB 616 SERIES 6/1 SERIES 25/252 SERIES PLANETARY GEAR BOXES INDEX SERIES MAXIMUM OUTPUT TORQUE LB-INCHES (N-M) CONTINUOUS/INTERMITTENT MAXIMUM
More informationMB-825 Flange Mounted
Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on 10.50 dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* 2.68 4.359 1/2-13 UNC-2A (4) on.250 dia.* 10.50 10.50 10.000.156.062
More informationP.O. Box 1388 West Sacramento, CA (916) Fax: (916)
P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 16 Installation Dimensions 30,000 in lbs Continuous Torque Output 5.2 to 1 Ratio 20,000 lb. Maximum Radial
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationCompressor Mount Kits
Compressor Mount Kits PAGE 237 NOTE: IMPORTANT - Minor modifications are occasionally necessary and are considered part of an installation. These kits are designed to fit vehicles with standard equipment.
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationSeries 615 through 640; High Bearing Life Design; Nm up to Nm 3-4. Series 645 through 560; High Bearing Life Design; Nm up to Nm 5-6
MACHINE SERVICE, INC. 1000 Ashwaubenon Street - P.O. Box 10265 Green Bay, WI 54307-0265 Phone (920) 339-3000 - Fax (920) 339-3001 ISO 9001:2008 Certified Table of Contents Series 615 through 640; High
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationMounting & Drive Kit Applications
KIT APPLICATIONS Air Conditioning & Heating Replacement Parts Mounting & Drive Engine Application Data... 6 Autocar Conventional Series...6 Chevrolet Tiltmaster...6 Chevrolet C Series Conventional...6
More informationMODEL B HYDRAULIC PUMP
< < SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More information12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationCH1900 Series Electronic Control Installation Manual... includes CP1200 Operator Panel MANIN1900 Revision 0
CH1900 Series Electronic Control Installation Manual... includes CP1200 Operator Panel MANIN1900 Revision 0 CH1900 Series Electronic Control Page 1 Notice to Boat Manufacturer, Installer, and Consumer
More informationDL1800A, DL2000A, DL2500A & DL3200A PULLING WINCHES. U.S. Patent Canadian Patent DL2500A
DL1800A, DL2000A, DL2500A & DL3200A PULLING WINCHES U.S. Patent 6116580 Canadian Patent 2378538 DL2500A Original Instructions ENGLISH WARNING READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE
More informationFA6B Series PTO PARTS LIST AND SERVICE MANUAL. Muncie Power Products, Inc.
FAB Series PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. FAB PTO EXPLODED VIEWS Detail A Detail B Detail F Detail C Detail E Detail D Detail A Output Shaft Assembly 5 9 5 8 0 Detail AA
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationModel 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
More informationPA S SI ONAT E COLLABORATIVE INNOVATIVE EMPOWERED. GT Exhaust and Silex Innovations are divisions of Nelson Global Products
PA S SI ONAT E COLLABORATIVE INNOVATIVE T R U S T E D EMPOWERED EN E R G IZ E D A C C E S S O R Y C ATA L O G & S P E C I F I C AT I O N S GT Exhaust and Silex Innovations are divisions of Nelson Global
More informationList Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationSAE Engine Mount. Selection For Pumping Application. Matching Pump End To Engine. Type B Centrifugal Pumps Close coupled pump ends.
Page 1 Selection For Pumping Application Pump End When delivering the required capacity (GPM) to the system piping, the pump must add the amount of Head required by the system at that capacity. The operating
More information12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
More informationFOR HEAVY DUTY APPLICATIONS
Air and Oil Filters FOR HEAVY DUTY APPLICATIONS With Nanofiber Technology Ideal For Extended Maintenance Intervals Superior In Prolonging Equipment Life Extended service filters Increase engine protection
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationHydraulics. Hydrostatic Steering Units HGA/HGB Series. HGA/HGB Series Features
Introduction HGA/HGB Series The HGA and HGB series Hydraguide steering units are designed for applications such as large agricultural equipment including tractors, combines and other self-propelled, specialized
More informationPARTS MANUAL. B-16, B-21, and TB-16 Scoot-Crete Power Buggies
PARTS MANUAL B-16, B-21, and TB-16 Scoot-Crete Power Buggies (Revised April, 2009) 1 Part #32107-01 GENERAL ARRANGEMENT 27 28 21 5 22 12 8 23 37 38 29 22 24 DANGER DO NOT OPERATE THIS MACHINE WITH YOUR
More informationMODEL B ELECTRIC HYDRAULIC PUMP
DIVISION UNEX CORPORATION 333 STATE ROUTE 7 NORTH MAHWAH, N.J. 07430- Tel: (0) -00 Fax: (0) -030 Parts List for: Form No. 0 HYTORCQAS- MODEL B ELECTRIC HYDRAULIC PUMP "A" "A", 4 7 3, 4 Motor Control Assemblies
More informationAccessory Catalog 2017 Revision: M-ACCS July 2017
www.maximsilencers.com Industrial Silencer, Heat Recovery and Catalytic Specialists Maxim Silencers Accessory Catalog 2017 July 2017 Prices are subject to change without notice. Prices are in U.S. dollars
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationForm No CE Parts List for:
Form No. 1000048CE Parts List for: PE55TWP-E110 PE55TWP-E220 MODEL B ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI 8 9 TORQUE SPOOL 110-120 IN. LBS. TORQUE NUT 15-20 IN. LBS. 5 3,4 1,2 VALVE DETAIL
More informationF3 Adjustable Tower Dual Stack Medical (With EVO Stack) F3ATM-E REV A
F3AT TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. (EVO STACK)/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationService Manual. #19 Gearmatic Winch
Allis Chalmers Service Manual #19 Gearmatic Winch Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS
More informationAustralian Transport Manufacturers Pty Ltd. Tooling Catalogue
AMT Australian Transport Manufacturers Pty Ltd Tooling Catalogue Australian Transport Manufacturers Pty Ltd. ABN: 87 140 887 501 TELEPHONE: (07) 3277 5111 FAX: (07) 3875 1945 WEB: www.austranman.com.au
More informationDIRECTIONAL COUPLERS FEATURES APPLICATIONS DIRECTIONAL COUPLERS
DIRECTIONAL COUPLERS DIRECTIONAL COUPLERS FEATURES igh power to 1000 watts CW Frequency ranges from 20 Mz to 18 Gz Low insertion loss and VSWR igh directivity Rugged packaging Directional and bidirectional
More information75R SERIES BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES. CLUTCH SPECIFICATIONS Clutches are sorted by increasing size of Pulley Diameter [A]
BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES C B D A If part number on clutch being replaced cannot be read use following procedure to determine required clutch part number. 1. Determine if clutch
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationSteering Control Units Series 40 Product Description and Features
Steering Control Units Series 40 Product Description and Features The Series 40 steering control unit includes two patented designs that make it even more responsive, reliable and cost effective. Symmetrical
More informationISO 5599/ Series Technical and Operating Data
ISO 5599/ Series...................................................................3-9 Technical and Operating Data......................................................................3- How to Order...................................................................................5-6
More informationPOWERFORCE PUMP POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY
POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY POWERFORCE Hard Iron Centrifugal Pump Parts Item Description Qty Part Number Reference
More informationInstallation Instructions
Installation Instructions GOOSENECK MOUNTING KIT Ford Super Duty F-250/F-350/ F-450 Part Numbers: 4494 WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationSNN SPLIT PLUMMER BLOCKS
SNN SPLIT PLUMMER BLOCKS SNN SPLIT PLUMMER BLOCKS FROM NSK The SNN split plummer block from NSK combines quality materials and design to maximize bearing performance. With features like serialized cap
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationVickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves 8mm valve Series 33 Function Port size Flow (Max) Individual mounting Series 3/ NC M3 0.08 C v Inline OPERATIONAL BENEFITS 1. 8mm valve direct solenoid
More information40, 45 & 47 SHAFTS ONL
DT (700) Series 28 2 7 8 2 27 24 9 9 23 22 2 20 8 3 30 3 29 2 40, 4 & 47 SHAFTS ONLY 4 30 32 33 3 3 29 34 2 4 34 ALL OTHER SHAFTS (800)24-97 NOTE: Some older model DT 2." bearing motors may use different
More informationIL8 Series. Medium Pressure Filters
Medium Pressure Filters 6 Applications for IL8 series filters Lube oil systems Power generation plants Test stands Primary metal equipment Pulp & paper equipment Offshore drilling and oil patch Flushing
More informationAir Motors up to 1 /2 hp, speeds from 500 to 10,000 rpm, max. pressure 100 psi (7 bar)
Air Motors up to 1 / hp, speeds from to 1, rpm, max. pressure 1 psi (7 bar) 1AM-NCC- ( Vanes, CCW Rotation) 1AM-NCW-1 ( Vanes, CW Rotation) 1AM-NRV-39A ( Vanes, Reversible) 1AM-NRV-3A Net wt. lbs. (,9
More informationRosedale Model HSS300 and HSS750 Single Cartridge Housings for Liquids
H S S S I N G L E C A R T R I D G E H O U S I N G S Rosedale Model HSS0 and HSS750 Single Cartridge Housings for Liquids Precision Machined Knife-Edge Seal The Rosedale Model HSS single element filter
More informationR5.0 STARTER APPLICATION GUIDE FOR CLASS-8 TRUCK, ON-ROAD & OFF-ROAD APPLICATIONS
R5.0 STARTER APPLICATION GUIDE FOR CLASS-8 TRUCK, ON-ROAD & OFF-ROAD APPLICATIONS 2014 WHY DENSO? OE Heritage DENSO is one of the world s largest automotive component suppliers with over $38 billion in
More informationVHO Vane Pumps ENGINEERING DATA. Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance
ENGINEERING DATA VHO Vane Pumps Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance www.fluidynefp.com Table of Contents Performance Data...2 Model
More informationIL8 Series. Medium Pressure Filters
Medium Pressure Filters Applications for IL8 series filters Lube oil systems Power generation plants Test stands Primary metal equipment Pulp & paper equipment Offshore drilling and oil patch Flushing
More informationSERVICE VALVES. Selecting the Correct Service Valves COMPRESSOR PARTS
COMPRESSOR SERVICE VALVES Table of Contents Selecting the Correct Service Valves 1. Determine Type of Fitting on Compressor Head: HEAD TYPES O Ring 3/4 x 7/8 Tube-O 1-14 Rotalock, or Flange 2. Determine
More information1. Axial Piston Pumps
Axial Piston Pumps 1. Axial Piston Pumps Series Model Maximum Operating Pressure Maximum Displacement Remarks Page PSI In 3 /rev PV & PVM & PVR Premier Worldcup Goldcup PV6 4500 0.88 PV10 4500 1.26 PV15
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationBulletin 1494V Variable Depth, Flange Operated Disconnect Switch Kits for 400 and 600 Amperes (Series A) Switches
Bulletin 494V Variable Depth, Flange Operated Disconnect Switch Kits for and Amperes (Series A) Switches ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
More informationGENERAL PURPOSE. Rotary Union Solutions. Series FLOW PASSAGE OPTIONS
GENERAL UROSE Rotary Union Solutions G Series FLOW ASSAGE OTIONS 2 8 3 4 6 10 12 Rotary Union Solutions G Contents About DSTI 3 What is a Rotary Union? 4 G Series Overview 5 How To Order 7 Specifi cations
More informationPRODUCT CATALOG VOLUME 17. Delano, MN USA. B /10
VOLUME 17 PRODUCT CATALOG Delano, MN USA www.arctic-fox.com B-500 05/10 TABLE of CONTENTS ALTERNATIVE FUEL WARMING PRODUCTS, NATURAL GAS AND PROPANE Natural Gas and Propane... 16 Biodiesel... 17 BATTERY
More informationF3CC-E CABLE CROSSOVER. Freeweight. Parts Diagram. Blue: KITS Red: PAINTED ITEMS.
F3AT-E TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. F3AT-E/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationService Bulletin No. 2848
MODEL TYPE SECTION/GROUP DATE 102 E / EL / E4500 Series Coaches Product Improvement 4--Brakes Dec. 20, 2002 SUBJECT CONDITIONS E--10P / 10PR SERVICE BRAKE VALVES Parts may be purchased from MCI Service
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationVickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
More informationVickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
More information