SERVICE VALVES. Selecting the Correct Service Valves COMPRESSOR PARTS
|
|
|
- Thomasine Norton
- 5 years ago
- Views:
Transcription
1 COMPRESSOR SERVICE VALVES Table of Contents Selecting the Correct Service Valves 1. Determine Type of Fitting on Compressor Head: HEAD TYPES O Ring 3/4 x 7/8 Tube-O 1-14 Rotalock, or Flange 2. Determine Valve Needed: #8 Discharge (high side) #10 Suction (low side) 3. Determine Hose End Fitting Type: Beadlock Flare, or O Ring 4. Service Valve Port Locations and Type: R12 Port 1/4 (7/16-20 thread) R134a Port 13mm used on Suction (low side) R134a Port 16mm used on Discharge (high side) 5. Backseat Seat Type: Incorporates a valve which can be set at three different positions to control A/C system refrigerant flow. Open Mid-way, or Closed SERVICE VALVES SPECIFICATIONS CHART VISUAL ILLUSTRATIONS SECTION HEAD FITTING TYPES RELATED ITEMS Adapters Assortments (caps, cores, retrofit) A-6 Manifolds, Universal Compressor Gasket Kits Compressor Shaft Keys Drier Port Adapters Pressure Relief Valves RetroFit Adapters / Fittings and Weld-on Schrader Valve Cores Service Caps Shaft Seal Kits MEI Corporation
2 SERVICE VALVES COMPRESSOR HEAD FITTING TYPES T/CCI, YORK, BLISSFIELD/TECUMSEH STYLE Typical Examples: Typical Example: ROTALOCK Uses white teflon seal 1/2 (#8) x 5/8 (#10) FLANGE Uses paper gasket or square cut O Ring 1-14 TUBE-O RING Uses HNBR (green) O Ring #5576 #5673 seal kit #0015 TECH TIP 1-14 Tube-O Service Valves are interchangable, and can be used on both upright or rotary type compressors. ICE, SANDEN, SELTEC, TAMA Typical Examples: Typical Example: 3/4 x 7/8 O RING FITTING 1-14 TUBE-O RING FITTING #10 7/8-14 #8 3/ Vertical Uses: (1) #8 and (1) #10 O Ring #8 Discharge use O Ring #0013 #10 Suction use O Ring #0015 Horizontal Vertical Uses: (2) #10 O Rings Discharge use O Ring #0015 Suction use O Ring # MEI Corporation 331
3 COMPRESSOR SERVICE VALVES Service Valve Specifications NOTE: Also refer to AEROQUIP section for E-Z CLIP service valve types. COMPRESSOR HOSE END HOSE END FTG. PORT PORT PORT FITTING TYPE FITTING TYPE FITTING SIZE PART# TYPE DESCRIPTION LOCATION NOTES ROTALOCK HEAD w/teflon SEAL - CCI / YORK - TECUMSEH / BLISSFIELD COMPRESSORS ONLY Rotalock O Ring #8 3/ R12 1/4 (7/16-20) Back Rotalock O Ring #10 7/ R12 1/4 (7/16-20) Back Rotalock O Ring #8 3/ R134a 16mm (high side) Back Rotalock O Ring #10 7/ R134a 13mm (low side) Back 1-14 TUBE-O RING Tube-O Ring Beadlock #8-4522S R134a 16mm (high side) on tube 45 Tube-O Ring Beadlock # S R134a 13mm (low side) on tube 45 Tube-O Ring Beadlock #8-4524S R134a 16mm (high side) on tube 90 Tube-O Ring Beadlock # S R134a 13mm (low side) on tube 90 Tube-O Ring Beadlock #8-5432A R134a Discharge Tube-O Ring Beadlock #8-5432, R R134a 16mm (high side) Back Tube-O Ring Beadlock # A R134a Suction Tube-O Ring Beadlock # R134a 13mm (low side) Back Tube-O Ring Beadlock # R134a 13mm (low side) Back Tube-O Ring O Ring #8 3/ w/o port Tube-O Ring O Ring #10 7/ w/o port Tube-O Ring O Ring #8 3/ R12 1/4 (7/16-20) Top Backseat Tube-O Ring O Ring #8 3/ (2) R12 1/4 (7/16-20) Top-Back Tube-O Ring O Ring #10 7/ (2) R12 1/4 (7/16-20) Top-Back Tube-O Ring O Ring #8 3/ R134a 16mm (high side) Back Tube-O Ring O Ring #10 7/ R134a 13mm (low side) Back Tube-O Ring O Ring #8 3/ R134a 16mm (high side) Top Backseat Tube-O Ring O Ring #10 7/ R134a 13mm (low side) Top Backseat Tube-O Ring Beadlock # SR R134a 3/4 x 7/8 O RING TYPE - SANDEN - SELTEC/VALEO COMPRESSORS (non-rotalock, non-tube-o) # 8 O RING O Ring #8 3/ R12 1/4 (7/16-20) Back #10 O RING O Ring #10 7/ R12 1/4 (7/16-20) Back # 8 O RING O Ring #8 3/ R134a 16mm (high side) Back #10 O RING O Ring #10 7/ R134a 13mm (low side) Back # 8 O RING O Ring #8 3/ R134a 16mm (high side) Top In-line Adapter #10 O RING O Ring #10 7/ R134a 13mm (low side) Top In-line Adapter #8 O Ring O Ring #8 3/ No Port 90 Adapter #10 O Ring O Ring #10 7/ No Port 90 Adapter #10 O Ring O Ring #10 7/ R134a 16mm (high side) Back TM31HD only #12 O Ring O Ring #12 1-1/ R134a 13mm (low side) Side TM31HD only DENSO COMPRESSORS PAD - 10PA15C O Ring #8 3/4 4222WK No Port fits on manifold #5835 PAD - 10PA15C O Ring #10 7/8 4223WK No Port fits on manifold #5835 PAD - 10S15C O Ring #8 3/4 5566D No Port fits on plate #5938 PAD - 10S15C O Ring #10 7/8 5566S No Port fits on plate #5938 PAD - 6E171 O Ring #10 3/ R12 1/4 (7/16-20) PAD - 6E171 O Ring #8 7/ w/o port with PRV PAD - 10PA17C O Ring #8 & #10 3/4-7/ R134a 13mm with PRV PAD - 10PA15C O Ring #8 & #10 3/4-7/8 5437R R134a w/o port with PRV PAD TYPE COMPRESSORS - SD7B10 #8 MIO MIO #8 4228S R134a Discharge #10 MIO MIO # S R134a Suction MEI Corporation
4 Service Valve Specifications SERVICE VALVES COMPRESSOR NOTE: Also refer to AEROQUIP section for E-Z CLIP service valve types. COMPRESSOR HOSE END HOSE END PORT PORT PORT FITTING TYPE FITTING TYPE FITTING SIZE PART# TYPE DESCRIPTION LOCATION NOTES GM/J.Deere/CAT/A6/S6 COMPRESSORS #8 O RING O Ring #8 3/4 5542C R134a 16mm on tube #10 O RING O Ring #10 7/8 5543C R134a 13mm on tube #8 O RING O Ring #8 3/4 5542MP R12 1/4 (7/16-20), 16mm on tube #10 O RING O Ring #10 7/8 5543MP R12 1/4 (7/16-20), 13mm on tube PAD O Ring #8 3/4 5542S No Port PAD O Ring #10 7/8 5543S No Port PAD O Ring #12 7/8 5544S No Port Service Valves Denso - 10PA15C Drillable Flange and Weldable Fitting Kit Must drill flange to mount and aluminum-weld fitting. (fits onto manifold of #5835) 4222WK #8 MIO Discharge Side Thread Size 3/ WK #10 MIO Suction Side Thread Size 7/8 14 R134a Port 90 Beadlock STEEL #5473R #5835 R12 - Backseat O Ring Fitting 45 Port Angle SD7B10 Compressor Adapter Fitting PAD Type S #8 MIO Discharge 4229S #10 MIO Suction O RINGS PAD MIO SUCT...# #0015 DISCH...# #0013 Flange Compressor T/CCI (York Style) Standard Flow Ports Denso - 10S15C Pad Fitting (fits onto plate of #5938) Aluminum Std O ring 5566D #8 Discharge (uses #0162 o ring) 5566S #10 Suction (uses #0161 o ring) R134a Port Beadlock 4524S... std. 4524SR... Reduced Dia. #8 Beadlock Discharge w/16mm 4525S...std. 4525SR... Reduced Dia. #10 Beadlock Suction w/13mm 5418 #8 O Ring Discharge 5426 #10 MIO - Suction 13mm Port, Flange Type While Supplies Last Standard 5432R... Reduced Dia. #8 Beadlock Discharge w/16mm Standard 5433R... Reduced Dia. #10 Beadlock Suction w/13mm Standard 5434R... Reduced Dia. #12 Beadlock Suction w/13mm 5453R... Reduced Dia. #14 Beadlock Suction w/13mm R134a Port 45 Beadlock STEEL Beadlock w/o Port Tube-O Type T/CCI (York Style) Tecumseh, Sanden Compressors w/o Service Port Seltec TM31HD Compressor STD. Flow Ports 4522S...std. #8 Beadlock Discharge w/16mm 4523S...std. #10 Beadlock Suction w/13mm 5432A #8 Beadlock Discharge 5433A #10 Beadlock Suction 5525SR... Reduced Dia. #14 hose, Beadlock 5435 #8 MIO - Discharge 5436 #10 MIO - Suction 5438 Discharge - High Side #10 Hose Fitting 16mm Port Size uses #0115 o ring 2017 MEI Corporation 333
5 COMPRESSOR SERVICE VALVES Listed in ascending order by our part number (continued). Seltec TM31HD Compressor STD. Flow Ports Sanden, Seltec 90 O Ring Coupler Adapts to Male Insert O Ring w/o Port Rotalock Compressor R12 - Schrader O Ring Fitting Rotalock Compressor R134a Port O Ring Fitting (cap #5531) 5439 Suction - Low Side #12 Hose Fitting 13mm Port Size uses #0115 o ring 5444 #6 5/8-18 Female x 5/8-18 Male 5445 #8 3/4-16 Female x 3/4-16 Male 5446 #10 7/8-14 Female x 7/8-14 Male 5449 #8 O Ring Discharge 5450 #10 O Ring Suction 5511 #8 O Ring Discharge w/16mm 5512 #10 O Ring Suction w/13mm R134a Port O Ring Fitting R134a Port - Backseat O Ring Fitting O Ring Compressor R134a Port Adapter 90 O Ring Fitting R12 - Schrader O Ring Fitting (2 ports) (cap #5531) 5513 #8 O Ring Discharge w/16mm 5514 #10 O Ring Suction w/13mm O Ring #8, #10 R12 - Schrader (cap #5578) 5517 #8 O Ring Discharge w/16mm 5518 #10 O Ring Suction w/13mm O Ring Compressor Sanden, Seltec R134a Port Adapter (straight) TECH TIP: Use to add a R134a Service Port to a R12-R134a compressor conversions #8 O Ring Discharge w/16mm 5520 #10 O Ring Suction w/13mm 5521 #8 O Ring Discharge 5522 #10 O Ring Suction (cap #5531) 5523 #8 O Ring - Discharge 5524 #10 O Ring - Suction (cap #5531) TECH TIP: Use to add a R134a Service Port to a R12-R134a compressor conversions #8 O Ring Discharge w/16mm 5529 #10 O Ring Suction w/13mm 5540 Compressor Adapter Converts Tube-O to Rotalock (2 required per compressor) Rotalock Seal # Compressor Adapter Converts Rotalock to Tube-O (2 required per compressor) O ring #0015 A6/S6 Service Valve R134a Port STEEL (Caterpillar) #0121 O rings Suct/Disch A6/S6 Compressor Fitting STEEL (Caterpillar) #0121 O rings Suct/Disch R134a A6/S6 Compressor Fitting STEEL (Caterpillar) #0121 O rings Suct/Disch R134a A6/S6 Adapter Pad Fittings GM, CAT, J.Deere Std O ring #0121 O rings Suct/Disch R12 R C #8 w/16mm port 5543C #10 w/13mm port Caterpillar A6 Service Vlv 5542MP #8 w/16mm port and R12 switch port (side) 5543MP #10 w/13mm port and R12 switch port 5542S...#8 MIO (steel) 5543S...#10 MIO (steel) 5544S...#12 MIO (aluminum) GM A6, PAD Fittings Adapter MEI Corporation
6 Manifolds GM/HT6 Sealing Washer Style Manifold w/deep Insert Denso 10PA17C Manifold SERVICE VALVES COMPRESSOR Denso 10PA15C & 10PA17C Manifold Denso 10PA15C Manifold #10 # Add-on Manifold Fits GMC Delphi compr w/sealing washer head (uses #0140 sealing washers). #8 MIO x #10 MIO (requires #4249GK bolt kit) PA17C (J.DEERE) Top Manifold Discharge & Suction #8, #10 Female Fittings Fits compressors: #5830, #5832, #5833, # B 10PA17C (J.DEERE) Compressor Manifold (aluminum) #8, #10 Female Fittings (uses #0164 gasket) Fits compressors: #5831, #5834, #5836, # R 10PA15C (J.DEERE) Compressor Manifold, Female (alum) Manifold exits on right side of compressor (uses #0164 gasket) Fits compressor: #5835 OE# AL78780 Denso 6E171 Manifold Denso 6E171 Manifold #10 # E171 (J.DEERE) #10 Suction Manifold, R12 port, 7/16 thread. Fits compressors: #5845, #5849 Hold Down Kits E171 (J.DEERE) #8 Discharge Manifold M HPRV (uses #50800 PRV) Fits compressors: #5831, #5849 #10 # Universal Swivel Manifold #8 x #10 Male Insert O ring Fittings Aluminum; without ports Fits: Sanden, Seltec, A6 Compressors 5208 Universal Manifold #10 x #12 Male Insert O ring Fittings Aluminum; without ports Fits: Sanden, Seltec, A6 Compressors 5545S A6/S6 - Hold Down Bracket Kit GM / CAT / J.Deere Supplied with a standard and metric bolt. 5546S A6/S6 to Sanden Conversion GM / CAT / J.Deere Hold Down Bracket Kit (used with #5207) Compressor Pressure Relief Valves 5682M GM Compressors (Delphi) Brass, Metric M thread w/hnbr O ring. M Metric 5683 CCI/York Style,Tecumseh, and Ford FS6 Bleeds off excessive R12 pressure in excess of 400 p.s.i. 3/8-24 3/ (R12 & R134a) Universal Denso 10PA17C, Seltec, GM HT6 Bleeds off excessive refrigerant pressure in excess of 400 p.s.i Sanden - Old Style Bleeds off at p.s.i. 3/ A Sanden - New Style Aluminum Low Profile w/hnbr O ring. 3/8-24 M Metric 5687 DENSO 10PA15C / 17C - Metric M thread w/o O ring. M Metric DENSO 6E171 only - Metric M thread HNBR 2017 MEI Corporation 335
7 COMPRESSOR SERVICE PARTS Service Caps / /16 Plastic () 5578 Backseat Service Valve Cap Black Plastic () 8953 M9-1.0 Port Caps Off road applications Low Side - light blue () 8954 M Port Caps Off road applications High Side - light blue () 8956 Switch Port Caps M () R134a Service Caps Switch Port Caps M () Black Blue with L (Low) *Bridgeport Piedmont OEM R134a 13mm Port *Bridgeport Piedmont RetroFit 13mm Adapter *Refrigeration Sales R134a RetroFit 13mm Adapter Black Red with H (High) *Bridgeport Piedmont OEM R134a 16mm Port *Bridgeport Piedmont RetroFit 16mm Adapter *Refrigeration Sales R134a RetroFit 16mm Adapter Blue *Aeroquip OEM R134a 13mm Port *Aeroquip Piedmont RetroFit 13mm Adapter *Frig-C Low Side R134a RetroFit Adapter Red *Aeroquip OEM R134a 16mm Port *Aeroquip Piedmont RetroFit 16mm Adapter *Frig-C High Side R134a RetroFit Adapter Blue with L (Low) *Bridgeport Piedmont OEM R134a 13mm JRA Port Red with H (High) *Bridgeport Piedmont OEM R134a 16mm JRA Port Black *Eaton OEM SSV High Flow R134a 13mm Port *Refrigeration Sales CCI Service Valve w/eaton SSV High Flow 13mm Port Black *Eaton OEM SSV High Flow R134a 16mm Port *Refrigeration Sales CCI Service Valve w/eaton SSV High Flow 16mm Port *Bridgeport Piedmont (Schrader Bridgeport) OEM ports are typically found on some GM and Ford Vehicles. *Eaton OEM ports are typically found on some heavy duty trucks and equipment and some Ford vehicles. *Aeroquip OEM ports are typically found on Chrysler, Ford heavy duty trucks, Navistar, John Deere, some GM & Ford vehicles, and numerous import vehicles MEI Corporation
8 Assortments - Caps, Cores, and RetroFit Components SERVICE PARTS COMPRESSOR (10 per) (2 per) (2 per) (2 per) (2 per) (2 per) Universal Standard Flow Valve Core R12 / R134a High Flow JRA Valve Core R134a GM High Flow Large Bore Valve Core R12 / R134a Volvo M8 High Flow Schrader Valve Core Eaton 13MM SSV High Flow Valve Core R134a Eaton 16MM SSV High Flow Valve Core R134a 1/4 Low Side 3/16 High Side 5532 (5 ea.) 13mm Hex Blue (5 ea.) 16mm Hex Red (5 ea.) 16mm Round Black (5 ea.) 16mm Hex Red (5 ea.) 13mm Round Blue (5 ea.) 13mm Round Black R12/R134a Schrader Valve Core Kit 8977 Complete Charging Port Cap Kit for R12/R134a (3 ea.) (2 ea.) 5531 (5 ea.) 1/4 Low Side 5574 (5 ea.) 13MM Round Blue (3 ea.) (1 ea.) 8978 R134a Valve Core Repair Assortment Kit 8984 Small Port Cap Kit (5 ea.) 3/16 High Side (NSS) (NSS) 5563 (3 ea.) 5575 (5 ea.) 16MM Hex Red 5564 (3 ea.) 5565 (3 ea.) 5532 (NSS) (5 ea.) (NSS) (NSS) Multi-Refrigerant Schrader & Port Cap Kit A full assortment of schrader valves and charging caps (NSS) (NSS) R134a Aluminum RetroFit Service Kit Complete Kit includes everything needed to retrofit systems to R134a. Includes schrader core remover, port eliminator caps, aluminum retro charging adaptors and retrofit labels (NSS) EMPTY R134a RetroFit Starter Assortment Kit Complete steel fitting assortment, including retrofit labels, schrader cores and port eliminator caps R12/R134a - Service Cap Kit (5 ea.) 5580 (5 ea.) 5578 (5 ea.) 2017 MEI Corporation 337
9 COMPRESSOR SERVICE PARTS RetroFit Charging Adapters and Fittings Remove & Discard R12 Caps & Valve Cores Screw On New R134a Retro Fit Adapters R12 Service Ports R12 Service Ports When retrofitting R12 systems to R134a, these fittings attach directly over the old R12 charging ports. Includes threadlock to prevent removal and new R134a schrader valve. Cap Aluminum Aluminum 5550S Weld-on Switch Port M Primary Seal Fitting, 16mm Port Male Thread, M Base 5553 Low Side Primary Seal, 13mm Port Female Thread, 10mm-1.25 red cap 5555 (high side) 1/4 (7/16-20) to 16mm, red cap Includes Valve Core, Neoprene O Ring and Threadlock. blue cap (low side) /4 (7/16-20) to 13mm, blue cap Includes Valve Core, Neoprene O Ring and Threadlock. red cap 5557 (high side) 3/16 (3/8-24) to 16mm, red cap Includes Valve Core, Neoprene O Ring and Threadlock. (Notch in nut designates 3/8 ) red cap (high side) /4 (7/16-20) to16mm, red cap Includes Valve Core, Neoprene O Ring and Threadlock. blue cap (low side) /4 (7/16-20) to 13mm, blue cap Includes Valve Core, Neoprene O Ring and Threadlock. Aluminum Aluminum Aluminum red cap 5560 (high side) 3/16 (3/8-24) to 16mm, red cap Includes Valve Core, Neoprene O Ring and Threadlock. (Notch in nut designates 3/8 ) red cap (high side) 5563 GM Primary RetroFit Adapter 16mm Port, red cap Male Thread 12mm OEM High Flow Port 13mm Port x M Includes Valve Core and Cap 5565 OEM High Flow Port 16mm Port x M Includes Valve Core and Cap MEI Corporation
10 RetroFit Charging Adapters and Fittings (continued) SERVICE PARTS COMPRESSOR 5583 Weld-on RetroFit Fittings 13mm Port 5584 Weld-on RetroFit Fittings 16mm Port Drier Port Adapter Fittings (for Universal Drier see page 525.) DRIER SIDE /8 #6 Male O ring to 3/8 #6 Male Insert O ring Drier Adapter /16 Male O ring to 3/8 #6 Male Insert O ring Drier Adapter TO DRIER 4161 M x 3/8-24 Male Switch Port Adapter 4162 M x 3/8-24 Male Metric Adapter /8-24 to 13mm (low side) R134a Charge Port Adapter /8-24 to 16mm (high side) R134a Charge Port Adapter /16 Female Flare to M Male Switch Port Adapter 4168 M Female Flare to 7/16 R12 Male Flare Adapter # # #10 Male O ring to Flare Adapter # #8 Male O ring to Female Flare Adapter 5447FF 8 x 8 Flare Adapter 90 Female Flare to Female Flare (Carrier A/C) 5447FO 8 x 8 O ring Adapter 90 Female O ring to Female O ring (Carrier A/C) 5527A 3/8 #6 Male O ring to 3/8 #6 Female O ring R12 Inline Charge Fitting /8-24 Male threads to 7/16 Male Flare R12 Adapter 2017 MEI Corporation 339
11 COMPRESSOR SERVICE PARTS Shaft Seal Kits 5487 Sanden Compressor 5H14 & 7H15 Shaft Seal Kit 5489 GM V5 Compressor Shaft Seal Kit 5490 Tecumseh Compressor HG Model Shaft Seal Kit 5491 T/CCI, York Compressor Shaft Seal Kit Large Plate, 6 Bolts, 1/4 Heads 5492 Tecumseh/York Compressor Shaft Seal Kit Small Plate, 6 Bolts, 3/8 Heads 5493 GM A6 & R4 Compressor Shaft Seal Kit - Ceramic 5494 Ford FS6 Compressor Shaft Seal Kit 5495 Seltec/TAMA/ Valeo Compr. TM08-TM16 Shaft Seal Kit 5497 Sanden Compressor SD508 & SD510 Shaft Seal Kit SNAP RING KIT 5498 Sanden Compressor SD708 & SD709 Shaft Seal Kit TM31 SIGHT GLASS KIT 5486 York Style - Heavy, Standard Duty, and Mini Compressor Models All Refrigerant Capability Deluxe Shaft Seal Kit Kit includes: Centering tool for proper plate orientation, Felt ring for improved dust protection and oil wick control and Clutch coil replacement anti-vibration Super-Screws Clutch Snap Ring Kit - 7H TM31/VC31 Sight Glass (Set of 2) 2017 MEI Corporation
12 Compressor Shaft Keys SERVICE PARTS COMPRESSOR 5535 Seltec 5536 GM A6/R Sanden/Sankyo 5538 T/CCI, York-Tecumseh Compressor Gasket Kits 5670 Ford Nippondenso FS Sanden 505,507,508,510,5H Sanden 708,709,7H T/CCI, York 206,209, GM A GM R GM DA-6,HR Zexel CH Series Diesel Kiki 2017 MEI Corporation 341
13 COMPRESSOR SERVICE PARTS Compressor Conversion Brackets - Rotary To Upright 5501 Conversion Bracket - CUMMINS NTC & N14 Third Groove Drive Replace rotary style (round) A/C compressor to York style (upright) two cylinder on 1986 to present T Kenworth, Peterbilt COE & Conv., Freightliner Conv., and 1984 to present Volvo Class 8-9; all with Cummins NTC engine driving the compressor from the accessory drive third groove. Use clutch: #5044 std. duty #5144 heavy duty w/diode & weatherpak Conversion Bracket - DETROIT DIESEL SERIES 60 Replace rotary style (round) A/C compressor to York style (upright) two cylinder on most vehicles with Detroit Diesel Series 60 engines. The compressor is driven by the accessory drive belts which also drives the alternator. Use clutch: #5044 std. duty #5144 heavy duty w/diode & weatherpak. Replace the T/CCI, York Tube-O Compressor with a Sanden SD7H15 Model. See page 307 for details. Note: Other Add-on A/C Compressor Bracket Kits are Available for a Number of Specific Engines. Call for Information MEI Corporation
14 Compressor Conversion Brackets - Upright To Rotary SERVICE PARTS COMPRESSOR 5509 Universal Bracket Kit - Sanden or Seltec Requires welding for exact fit. Compressor Adapter Bracket - used for mounting compressors for different (not common) types of engine applications. 6-7/8 4-1/2 center 3-3/8 center 7-1/ Conversion Kit - T/CCI, York Style to Sanden/Seltec Adjustable compressor bracket fits most York style (upright) compressor mounts. Converts system to Sanden/Seltec standard mount compressors. 5623W Adapter Kit - T/CCI, York Style to Sanden/Seltec Weldable Bracket No slots on bottom of plate. Welds onto OE bracket. 4-1/2 center 1-1/2 4-1/2 center 3-3/8 center 4 3-3/8 center 5633 Conversion Kit - T/CCI, York Style to Sanden/Seltec Fixed compressor bracket fits most York style (upright) compressor mounts. Converts system to Sanden/Seltec standard mount compressors. Non-adjustable bracket. 5633H Conversion Kit - T/CCI, York Style to Sanden 4 High Rise Bracket Non-adjustable bracket MEI Corporation 343
Identification Tag (cannot be used for ordering purposes) Part Number Label (identifies mfg. part number of complete assy.)
Compressors - Seltec Section V: Illustrated Identification Tag (cannot be used for ordering purposes) (identifies specifications only) Type and Model Refrigerant Type Lubricant Type Seltec Body Number
TROUBLE SHOOTING CHART
Section V: Illustrated York Style, Blissfield/Tecumseh TROUBLE SHOOTING CHART PROBLEM DIAGNOSIS CAUSE AND REMEDY SYMPTOM AND INSPECTION REPAIR OR REPLACE IMPROPER COOLING - (No unusual compressor noise)
Tractor Supply Ltd. WE RE MORE THAN USED PARTS HY-CAPACITY. Air Conditioning. Quick Reference Guide.
Tractor Supply Ltd. WE RE MORE THAN USED PARTS HY-CAPACITY Air Conditioning Quick Reference Guide www.fawcett.cc www.fawcett.cc HY-CAPACITY All-Makes Air Conditioning can help your business Service multiple
75R SERIES BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES. CLUTCH SPECIFICATIONS Clutches are sorted by increasing size of Pulley Diameter [A]
![75R SERIES BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES. CLUTCH SPECIFICATIONS Clutches are sorted by increasing size of Pulley Diameter [A]](/thumbs/89/97694717.jpg "75R SERIES BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES. CLUTCH SPECIFICATIONS Clutches are sorted by increasing size of Pulley Diameter [A]")
BLISSFIELD (TECUMSEH), TCCI (YORK) COMPRESSOR CLUTCHES C B D A If part number on clutch being replaced cannot be read use following procedure to determine required clutch part number. 1. Determine if clutch
COMPRESSORS DENSO 10P13C 6E171 JOHN DEERE / NIPPONDENSO 7SBU16C / 7SEU17C / 7SEU17 10H20C 10PA15C 10PA17C JOHN DEERE 10PO8E KUBOTA COMPRESSORS
DENSO Listed in ascending order by model type then clutch grooves. Part No. Description Groove / Diameter / Make / OEM# / s 6E171 JOHN DEERE / NIPPONDENSO 5845, SR NEW 1 Groove 5.7 146mm 12v John Deere
A/C SALES and PRODUCT TRAINING
A/C SALES and PRODUCT TRAG 1 TECHNICAL OVERVIEW SYSTEM IDENTIFICATION 5 PART EXPANSION VALVE SYSTEM HOT HIGH PRESSURE GAS LOW PRESSURE GAS (SUCTION SIDE) COLD LOW PRESSURE GAS EXPANSION VALVE OUTSIDE AIR
Table of Contents Accumulators RECEIVER DRIERS
Table of Contents Accumulators RECEIVER DRIERS Basic Information Receiver Driers, Accumulators and In-Line Filters are canisters used to filter debris and remove moisture to protect the a/c system. Various
COMPRESSORS. Basic Compressor Information
Table of Contents Basic Compressor Information There are many different makes of compressors used in our marketplace. Regardless of manufacture and design, all compressors operate as the pump to keep the
RoadChoice.com HVAC CATALOG
RoadChoice.com HVAC CATALOG 2017 Table of Contents POPULAR TRUCK APPLICATIONS Freightliner...................................................... 3 Kenworth...5 Mack...7 Navistar...9 Peterbilt.......................................................
COMPRESSORS (03- ) Basic Compressor Information. BLISSFIELD (Tecumseh) see T/CCI
Section V: Table of Contents Compressors Basic Compressor Information There are many different makes of compressors used in our marketplace. Regardless of manufacture and design, all compressors operate
O-RING & GASKET IDENTIFICATION
O-RING & GASKET IDENTIFICATION R-12 & R-134a O-RINGS s s are actual are acutal size size 1..176 x.070 2..185 x.056 3. 4..220 x.070.237 x.103 24604 Capillary Tube 5. 6..239 x.064 24605 Nissan / Jaguar Import
13 HVAC. Application Table Blower Motors & Parts for Trucks, Trailers & Buses. Proven, reliable and always innovative.
Parts for Trucks, Trailers & Buses 13 Proven, reliable and always innovative. offers reliable aftermarket products that are designed and tested to exceed customers expectations regardless of the vehicle
Receiver Driers. Accessories
74R SERIES Receiver Driers Accessories Did You Know The primary function of a receiver drier is to remove moisture from the A/C system. Under normal operating conditions the drier canister should be warm
YEAR MODEL APPLICATION O.E.M. # PART NO. 38,48,49,58,59,69
Section I: Trucks Western Star BLOWER MOTORS YEAR 2011 2005 All... Main Unit (cw) w/oe#... RD58663-0... 01-1610 2004 1996 All... Main and Aux w/red Dot A/C (cw) w/oe#... RD38657-0... 01-1401 2003 1993
R134a Compressors SD 5 10 HD SD 7 H 15 HD
SANDEN Compressor Identification R12 Compressors Sanden Number of Cylinders Approx. Displacement (cu.in.) Heavy Duty Clutch R134a Compressors SD 5 10 HD SD 7 H 15 HD Sanden Number of Cylinders Port Location
Receiver Driers. Accessories
74R SERIES Receiver Driers Accessories Did You Know The primary function of a receiver drier is to remove moisture from the A/C system. Under normal operating conditions the drier canister should be warm
Receiver Driers. Accessories
Receiver Driers Accessories Did You Know The primary function of a receiver drier is to remove moisture from the A/C system. Under normal operating conditions the drier canister should be warm to the touch.
HEAVY DUTY HEATING & AIR CONDITIONING UNITS & ALL MAKES PARTS. ISSDistribution.com - Call (800)
HEAVY DUTY HEATING & AIR CONDITIONING UNITS & ALL MAKES PARTS 2011 74R SERIES Receiver Driers Accessories Did You Know The primary function of a receiver drier is to remove moisture from the A/C system.
O-RINGS, CAPS & CORES
CAN T FIND WHAT YOU RE LOOKING FOR? Email your enquiries to theteam@highgateair.com.au - we are here to help you! S, CAPS & CORES Visit www.highgateair.com.au for the latest and most complete list of O-Rings,
A/C LUBRICANT SPECIFICATION & REPLACEMENT GUIDELINES
A/C LUBRICANT SPECIFICATION & REPLACEMENT GUIDELINES When it comes to A/C compressors these days, you never know what to expect in terms of the type and amount of lubricant inside. Some A/C compressors
UNIVERSAL SANDEN MANUFACTURER # RANSHU NUMBER PRICE DESCRIPTION MANUFACTURER # RANSHU NUMBER PRICE DESCRIPTION
SANDEN MANUFACTURER # RANSHU NUMBER PRICE DESCRIPTION 4508 14-SD4508NC $630.00 SD5H14 10 GROOVE POLY V-ORING 4509 14-SD4509NC $630.00 SD5H14 5.25" 2 A GROOVE V-ORING 4510 14-SD4510NC $630.00 SDH14 5.25"
Basic Information EVAPORATORS EVAPORATORS. EvaporatorS Illustrations Specifications...352
Table of Contents Basic Information The A/C Evaporator is located on the low pressure side of the a/c system. It is usually mounted inside the cab under the dash panel. The evaporator receives the refrigerant
TOOLS & SERVICE ITEMS
TOOLS SERVICE ITEMS Table of Contents TOOLS & SERVICE ITEMS ACCESSORIES... 463 MASTERCOOL HOSE CRIMPER... 368 CHARGING ADAPTERS... 473 OIL TYPES - CHART... 228 CHARGING HOSES... 472 OIL INJECTORS... 474
Table of Contents. Basic Information (Cores)
Table of Contents Basic Information (Cores) The A/C CONDENSER Is located on the high pressure side of the a/c system. It is mounted directly in front of the radiator where it can receive air flow created
Compressor MODEL 05G $3.00
Compressor MODEL 0G -0 $.00 Service Parts List MODEL 0G COMPRESSOR CONTENTS INTRODUCTION... I ORDERING INSTRUCTIONS... I GENERAL NOTES... i. TOOLS / OILS / FITTINGS.... CRANKCASE AND SUCTION SERVICE VALVE....
ER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
Section V: Table of Contents
Section V: Table of Contents Basic Evaporator Information The A/C Evaporator is located on the low pressure side of the a/c system. It is usually mounted inside the cab under the dash panel. The evaporator
TOOLS & SERVICE ITEMS
Table of Contents SERVICE ITEMS TOOLS TOOLS & SERVICE ITEMS ACCESSORIES...572 NITROGEN PRESSURE TESTING Can Taps, Depressors, Goggles, Permagum, Tape, etc. Regulator Kit...577 CHARGING ADAPTERS...582 OIL
Automotive A/C Tools Catalog
Automotive A/C Tools Catalog 1401 Valley View Lane, Suite 100 Irving, Texas 75061 972-812-7000 888-286-6342 Fax 972-891-9705 www.omega-usa.com Table of Contents Chemicals...2 LOKTRACER...3-4 Hose Repair...5-7
HVAC Solutions. New refrigerant regulations you need to know. EVERYDAY DELIVERY TO: Eastern Iowa Western Illinois Southwest Wisconsin
HVAC Solutions New refrigerant regulations you need to know EVERYDAY DELIVERY TO: Eastern Iowa Western Illinois Southwest Wisconsin Mei SANDEN COMPRESSORS OE PART# OE# MACK 03-1200 2006RD51M MACK 03-1201
Mounting & Drive Kit Applications
KIT APPLICATIONS Air Conditioning & Heating Replacement Parts Mounting & Drive Engine Application Data... 6 Autocar Conventional Series...6 Chevrolet Tiltmaster...6 Chevrolet C Series Conventional...6
FILE / COMPRESSOR SANDEN USER GUIDE
26 June, 2018 FILE / COMPRESSOR SANDEN USER GUIDE Document Filetype: PDF 431 KB 0 FILE / COMPRESSOR SANDEN USER GUIDE AC Compressor Install Instructions By Sanden. ACMEAIRPARTS.COM "30 Years experience
Mobile Air Conditioning Components Catalog
Mobile Air Conditioning Components Catalog - 2007 - Summit Industries, Inc. 475 Dodson Lake Drive Arlington, Texas 76012 USA Ph. (817) 861-8144 Fax (817) 274-1156 sales@summitseal.com www.summitseal.com
Air Con Automotive Mobile A/C Catalogue 2015 Contact us today! Tel: 057 9125751 E: sales@airconautomotive Table of Contents 1.0: A/C Equipment. 1.1: Recovery Stations... 4 1.2: Tools and equipment....
SERVICE PARTS for MCC XCELSIOR SERIES T -367PL REV. 02/ Mobile Climate Control
T--367PL Manual SERVICE PARTS for MCC XCELSIOR SERIES 50-2104 T -367PL REV. 02/2015 PARAGRAPH NUMBER TABLE OF CONTENTS INTRODUCTION... II MODEL/SERIAL NUMBER PLATE LOCATION... II MODEL CHART... II ORDERING
Repair any problems or leaks before retrofitting. Affix labels to the vehicle showing conversion status. Observe all safety recommendations.
The use of R134a in mobile A/C systems designed for R-1 2 refrigerant causes higher discharge pressures (as much as 10-15%) and necessitates changing the compressor lubricant from mineral oil (5GS) to
Compressor Installation Procedures FAILURE TO FOLLOW THESE STEPS WHEN INSTALLING THE COMPRESSOR WILL VOID YOUR WARRANTY
Compressor Installation Procedures FAILURE TO FOLLOW THESE STEPS WHEN INSTALLING THE COMPRESSOR WILL VOID YOUR WARRANTY Procedimientos de Instalación de Compresores LA FALTA DE CUMPLIEMIENTO DE ESTOS PASOS
25 Off Use code: COUPON-RTACCOMP25 Valid March 1 31, Off Use code: COUPON-RTACCOND20 Valid March 1 31, 2019.
HVAC parts for all makes and models. Any Rig Tough Compressor $ 25 Off Use code: COUPON-RTACCOMP25 Valid March 1 31, 2019. Any Rig Tough Condenser $ 20 Off Use code: COUPON-RTACCOND20 Valid March 1 31,
To determine if an A/C clutch should be returned for Warranty Consideration:
Warranty is a growing concern for all partners in the distribution of A/C Components. Because of the growing number of warranty questions, please study the following pictures to familiarize yourself with
World Class Excellence. Engineered Replacement Components
MT9129-2009 World Class Excellence in Engineered Replacement Components Registered to ISO 9001 Global Supplier of Innovative Engineered Replacement Components Engineered Replacement Parts Leading Through
CONDENSERS BASIC INFORMATION CONDENSERS. CONDENSER Specifications Chart Visual Illustrations Section MULTI-FLOW RETROFIT CONDENSERS...
Table of Contents BASIC INFORMATION The A/C Condenser Is located on the high pressure side of the A/C system. It is mounted directly in front of the radiator where it can receive air flow created by the
2003 Mustang Workshop Manual
Page 1 of 6 SECTION 412-03: Air Conditioning 2003 Mustang Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/14/2002 Air Conditioning Printable View (225 KB) The A/C refrigerant system
L A U N A M E IC V R E S
SERVICE MANUAL n All cast iron wear surfaces (including permanent cast iron cylinder liners, cast iron piston rings, cast iron crankshaft and cast iron shaft seal plate). n High load ball bearings (no
SWITCHES. MISCELLANEOUS Air Control Switches Air Cylinders Louvers and Diffusers Switch Control Knobs
Table of Contents AIR, CYCLING, CUT-OFF, SENSORS, TEMPERATURE, and TRANSDUCERS Pressure Specifications Chart... 481 AIR OPERATED... 463 AIR SENSING... 464 APADS... 496 BINARY/TRINARY... 489 BLOWER - Rocker,
Omega Part No# DESCRIPTION Qty Available while Selling price GPD# FS
Omega Part No# DESCRIPTION Qty Available while Selling price GPD# FS supplies last 20-01024-AM COMP V5 PV6 123mm 01- RENAULT MEGANE SCENIC 66 $119.00 20-01222 COMP SD7V16 1222 PV6 120mm 12V 73 $199.00
Controls. Electrical & Refrigerant 71R SERIES. Did You Know The EXPANSION VALVE
71R SERIES 71R SERIES Controls Electrical & Refrigerant Did You Know The EXPANSION VALVE meters refrigerant based upon evaporator heat loads. As the refrigerant gas leaving the evaporator passes through
FLX. Compressor Series7. Delivering Excellence
FLX Compressor Series7 Delivering Excellence What is a FLX7? The FLX7 is Sanden s flexible compressor series. We started with the SD7H15 compressor known throughout the automotive and mobile HVAC industries
A/C Tools AC Line Disconnector AC AC AC AC-20013
AC-20009 A/C Spring Lock Coupling Tools Used for separating spring lock air conditioning coupling on 1981-current Ford vehicles, and 1994 and newer Chrysler and Jeep vehicles. They provide the only means
MCC SERVICE REPLACEMENT PARTS for
T- 0PL Manual MCC SERVICE REPLACEMENT PARTS for TRANSIT COMPRESSORS T- 0PL REV. 09/0 0 Mobile Climate Control TABLE OF CONTENTS SERVICE PARTS... INTRODUCTION... CONFIGURATION IDENTIFICATION... GENERAL
AIGN. ALLSTAR TRADING s.r.o. Okrajova 4c, Havirov Tel./Fax:
CAMP ALLSTAR TRADING s.r.o. Okrajova 4c, 736 01 Havirov Tel./Fax: +420 596 410 120 info@autoelektrika.cz www.autoelektrika.cz 1 Booster Cabel CAMP Electromagnetic Battery Switches Moulded brass charging
71R SERIES. Controls. Electrical & Refrigerant
71R SERIES Controls Electrical & Refrigerant Did You Know The expansion valve meters refrigerant based upon evaporator heat loads. As the refrigerant gas leaving the evaporator passes through the valve
Millennium TM. 100 thru 675 Tons (315 thru 2375 kw) renewal parts. Supersedes: RP1 (1099) Form RP1 (710) R-22 and R-134a 00202VIP
Millennium TM Rotary Screw Liquid Chillers renewal parts Supersedes: 160.80-RP1 (1099) Form 160.80-RP1 (710) Model YS BA CB S0 thru YS FA FB S5 (Style E) 100 thru 675 Tons (315 thru 2375 kw) 00202VIP R-22
DESCRIPTION AND OPERATION
412-03-1 Air Conditioning 412-03-1 DESCRIPTION AND OPERATION Air Conditioning Refrigerant flow into the evaporator core is metered The air conditioning system components are: by an evaporator core orifice
Pulleys, Hubs, and Coils in Stock
H12-7000 Ford FS10 Clutch Hub H12-7001 Leading Through Technology Ford FS10 Clutch Hub 21 Spline Long Shaft 23mm- Leaf Spring 21 Spline Short Shaft 17mm- Leaf Spring H12-7306 Ford FS10 Clutch Coil H12-7709
HEATER CORES. Basic Information
Table of Contents Basic Information The HEATER CORE is usually located inside the cab under the dash. It is connected to the engines heater hoses. As hot engine coolant flows through its coils or tubes;
PARTS CATALOG FOR SCHOOL BUSES AND MORE!
PARTS CATALOG FOR SCHOOL BUSES AND MORE! PARTS CATALOG FOR SCHOOL BUSES AND MORE! Thank you for choosing Blue Bird and Blue Bird parts! As a seller of the most recognized and trusted brand in student
MACHINES RECOVERY. 99 Washington Street Melrose, MA Phone Toll Free SYSTEMS SUPEREVAC
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com RECOVERY SUPEREVAC HOSES 29 RECOVERY HOSES 1/4" 4-IN-1 BALL VALVE TOOL For vacuum,
PUMP PARTS HYPRO PUMPS DIAPHRAGM MODELS: D50 & D50AP-A REPLACEMENT PARTS
PUMP PARTS HYPRO PUMPS MODELS: D50 & D50AP-A REPLACEMENT PARTS Code 4 A Stock No. Mfg. No. Parts Inc. Description Price Ea. HYK-25 9910-KIT1919 s O-Ring Kit $ 31.28 HYK-26 9910-KIT2111 l Diaph. Kit (Buna-N)
Parts Manual Cornelius - Energize 6
Parts Manual Cornelius - Energize 6 Page of 6006 COVER TOP ENERGIZE6 6000979 COVER REAR SERVICE WRAP ENERGIZE6 6000980 COVER REAR WRAP ENERGIZE 6 600098 WRAPPER WATER BATH 88 007 0088 LENS, ENERGIZE Page
LOKRING Automotive Service Connectors For the Automotive AC Field
Local Distributor: LOKRING Automotive Service Connectors For the Automotive AC Field American LOKRING Corporation 2525 Dundee Road Winter Haven, FL 33884 863-325-9262 www.lokringusa.com FX-863-324-8626
SERVICE PARTS LIST for
T-295PL Manual SERVICE PARTS LIST for MODEL GR-60 (N.A.O.) Rooftop Air Conditioning Unit T-295PL REV. 06/202 202 Mobile Climate Control TABLE OF CONTENTS PARAGRAPH NUMBER Page INTRODUCTION... i MODEL CHART...
Appendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
PART NO. SAL025 REVISED: 7/18/2013. Supplying All School Bus Manufacturers
SCHOOL BUS A/C CATALOG PART NO. SAL025 REVISED: 7/18/2013 Supplying All School Bus Manufacturers 1-800-831-6301 www.sunairusa.com WARRANTY STATEMENT Sunair Products warrants the products it offers, to
Tube Remover and Installer. and Installer Used for servicing Ford systems produced after Screen Extractor. Ford Aerostar Expansion
gauges A/C FLUSH KIT Easy-to-use system removes refrigerant oil, moisture contaminants from system components lines during retrofitting compressor replacement. Kit includes rubber-tipped flush gun, canister
Centrifugal Chiller PE046, PE047, PE048, PE050 PEH PF083, PF096, PF105, PF116 PH PHH PL
Centrifugal Chiller PE046, PE047, PE048, PE050 PEH046-050 PF083, PF096, PF105, PF116 PH046-050 PHH046-050 PL-906-49 Unit ASSY. - Labels / 1987 to Present Unit ASSY. - Labels / 1987 to Present No. Index
POWEREDGE. DIESEL AFTERTREATMENT Diesel Particulate Filters & Diesel Oxidation Catalysts
POWEREDGE DIESEL AFTERTREATMENT Diesel Particulate Filters & Diesel Oxidation Catalysts Distributed by DENSO Manufactured by AP Emissions Technologies Built to Exceed. For more than 30 years DENSO Commercial
Compressor Mount Kits
Compressor Mount Kits PAGE 237 NOTE: IMPORTANT - Minor modifications are occasionally necessary and are considered part of an installation. These kits are designed to fit vehicles with standard equipment.
Controls. Electrical & Refrigerant 71R SERIES
71R SERIES Controls Electrical & Refrigerant Did You Know The EXPANSION VALVE meters refrigerant based upon evaporator heat loads. As the refrigerant gas leaving the evaporator passes through the valve
A/C COMPRESSOR SERVICING Article Text 1991 Saab 9000 For Copyright 1997 Mitchell International Friday, October 15, :22PM
Article Text ARTICLE BEGINNING 1991 GENERAL SERVICING Compressor Service * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system, use only approved refrigerant recovery/recycling equipment.
Controls. Electrical & Refrigerant 71R SERIES. Did You Know. Service Tip 71R SERIES
71R SERIES Controls Electrical & Refrigerant Did You Know The EXPANSION VALVE meters refrigerant based upon evaporator heat loads. As the refrigerant gas leaving the evaporator passes through the valve
INCREASE SALES AND REDUCE COMEBACKS! EV06_VOL I
2018 A/C KIT GUIDE INCREASE SALES AND REDUCE COMEBACKS! EV06_VOL I WHAT S INSIDE HD KIT APPLICATIONS Don t risk your reputation and profitability by replacing just the compressor. Do the job right and
Controls. Electrical & Refrigerant 71R SERIES
71R SERIES Controls Electrical & Refrigerant Did You Know The EXPANSION VALVE meters refrigerant based upon evaporator heat loads. As the refrigerant gas leaving the evaporator passes through the valve
VALVES & VALVE ACCESSORIES
Passenger Rubber Snap-In Valve 211412 211413 211414 211415 211418 Prod. Code PASSENGER RUBBER Snapin Valve Packaging Rim hole dia. 211412 T/L VALVE each 11.3 33 - TR412 211413 T/L VALVE each 11.3 43 -
Service Manual. Climate Control Inc.
SECTION 2 Service - Clutch Servicing (Removal & Installation) - Shaft Seal Servicing (Removal & Installation) - Head & Valve Plate Servicing (Removal & Installation) - Baseplate Servicing (Removal & Installation)
9pcs A/C Fuel Line Disconnect Tool Set
AC A1 KA-6494N 4pcs A/C Spring Locking Coupling Tool Set Release spring lock connector on air conditioning line for separating spring lock air conditioning refrigerant pressure lines on 1981-current ford
SWITCHES SWITCHES SWITCHES. AIR, CYCLING, CUT-OFF, SENSORS, TEMPERATURE, and TRANSDUCERS Miscellaneous Specifications Chart
AIR, CYCLING, CUT-OFF, SENSORS, TEMPERATURE, and TRANSDUCERS Miscellaneous Specifications Chart... 567 ACTUATORS... 473, 556 AIR OPERATED... 548 AIR SENSING... 549 APADS... 588 MISCELLANEOUS Air Control
Save over 55% All-Makes Headlights BULLSEYE. Dorman Volvo Headlights. May 2017 EACH. Dealer price. our price
BULLSEYE May 2017 Save over 55% All-Makes Headlights Dorman Volvo Headlights Left PN: 888-5506 Right PN: 888-5505 Dealer price 437 our price FIND A BRANCH Near you: fleetpride.com. 800-967-6206 Why Pay
SWITCHES SWITCHES. Control Switches SWITCHES. Pressure Specifications Chart , 528
Air, Cycling, Cut-Off, SENSORS, temperature, and TRANSDUCERS Pressure Specifications Chart... 511, 528 Air operated Switches... 510 Air Sensing Switches... 545 Apads switches... 551 Binary/Trinary... 537,
Lankota, INC. LAN Installation Instructions
Lankota, INC. LAN - 84206 Converts 600 Series Platform Heads to 50 Series & Earlier Model Combines. Installation Instructions Kit LAN84206 Lankota is the trademark of Lankota, Inc. 1 LAN 84206 Parts break
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
CHECK VALVES. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
CHECK VLVES MUELLER CHECK VLVES DESIGN FETURES 1. Soft neoprene seat provides positive seal against reverse flow. 2. Four space tabs maintain washer/seat alignment and guide the seat disc for smooth operation.
Combustion Technologies By-Pass Filtration Instructions
Combustion Technologies By-Pass Filtration Instructions www.combustionusa.com Made in the USA Date Revision Jan 17 th, 2013 PLEASE READ AND UNDERSTAND ALL INSTALLATION INSTRUCTIONS PRIOR TO BEGINNING THE
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
77R SERIES. Condensers. Passive & Powered
77R SERIES Condensers Passive & Powered Did You Know The presence of dust, bugs and debris on the face of the condenser fin and tubes will create a thermo-barrier. In turn, the condenser s ability to dissipate
AIR CONDITIONING Accessories
Accessories Advantages : - Easy to install even in motor compartment - No measuring required - This fitting/hose combination tested according to SAE J2064 has the lowest permeation compared to the existing
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
Air Tools & Accessories
Air Tools & Accessories We stock a full line of Milton air accessories and air line equipment to keep your tools running and tires inflated. Also, check out our line of standard and titanium Ingersoll
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
Advanced compressor technology for the world B Group 300 Series Compressors
Advanced compressor technology for the world B Group 300 Series Compressors Unicla Cat. No. C1702 B Group 300 Series Compressors The Unicla 300 series compressors are the ideal choice for designers of
THE ULTIMATE FASTENER SYSTEM
THE ULTIMATE FASTENER SYSTEM Version A1 STEP 1 STEP 2 STEP 3 STEP 4 (98 DIFFERENT ITEMS) (108 DIFFERENT ITEMS) (104 DIFFERENT ITEMS) (103 DIFFERENT ITEMS) 4001 Plastic Fasteners 4023 Import Fasteners #1
2100 SIGNATURE SERIES
100 SIGNATURE SERIES MACHINE: 30011 PAGE 1 100 SIGNATURE SERIES MACHINE: 30011 9 6 1 1 10 11 1 7 0 13 8 1 19 OLD STYLE BATTERY BOX 15 3 18 17 16 6 3 5 5 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
Clutch Products Worldwide Leader in OE Clutch Manufacturing. Medium Duty Kits Picture Guide. Bringing OE to the Aftermarket
Part No. CAT-PAS2009 October 2009 2009-10 Worldwide Leader in OE Clutch Manufacturing Clutch Products Medium Duty Kits Picture Guide Valeo Transmissions 310 E Street Hampton, VA 23661 USA Valeo Hotline:
MODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
XV. Parts. Mobile Climate Control 303
XV. Parts Mobile Climate Control 303 MCC Reference Manual 2014 XV.1. Valves and O-Rings Heater Solenoids Valve 26-0348 26-0330 26-0194 Heater solenoid valve 24V 3/4 3 way 26-0348 Heater solenoid valve
Irontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. (319) FAX (319)
Parts & Instruction Manual Irontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. 1-800-423-3384 PO BOX 9877, (Main) Cedar Rapids, 1-800-821-7520 Iowa 52409 (EST) USA (319)
BLOWER MOTORS HA TruckAirParts
BLOWER MOTORS C500 SERIES 2006 1980 C500 w/bergstrom main unit w/double shaft mtr 203080BSM 01-2014 275154 20579P 2809-541-009 HB1035 HB1040 HB1050 K318-20-1 PF2646Q RD5-4942-0 RD5-6801-0 ZGG11645Q 2003
HYDRAULIC CATALOG COMPONENTS & KITS
HYDRAULIC CATALOG COMPONENTS & KITS REVISED 07/2018 TABLE OF CONTENTS Item Page Lift Cylinders 3 Lift Cylinder Bleeders 4 Lift Cylinder Connection Parts Pumps 5 Pump Components 6 Controlled Diverting Valves
& 76 CHEVROLET NOVA HEATER ONLY
specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic hi l PERFECT FIT IN-DASH HEAT/ COOL/ DEFROST 1969-74 & 76 CHEVROLET NOVA HEATER ONLY CONTROL & OPERATING INSTRUCTIONS The controls on
80c - Clutch - Flywheel Catalog
80c - Clutch - Flywheel Catalog SPITZ HEAVY DUTY PITTSBURGH TRUCK PARTS CASTLE TRUCK PARTS heavydutyusa.com Qbrand.com December 15, 2015 Printer Version Counter Sales (724) 382-5887 National Accounts 1-800-525-0988