MB-825 Flange Mounted

Size: px
Start display at page:

Download "MB-825 Flange Mounted"

Transcription

1 Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* /2-13 UNC-2A (4) on.250 dia.* Min dia. (2) holes 180 apart. Installation * Mounting holes are within.006 of true position Drive End See Note D NEMA Frame Sizes 16 Dim. D 213C & 215C or TC C & 256C or TC Min Shaft Size Static Torque 80 lb. ft. Maximum Speed 4,000 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. U L Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Warner Electric ( ) QRO (442)

2 Normal Duty Drawing I-2552 Motor Brake MB-825 Flange Mounted Item Description Part Number Qty. 1 Cover Bushing* 1 1/2" to 1-5/8" Bore to Armature Hub Armature Magnet - 90 Volt Terminal Accessory Adapter Mounting Accessory Drive Pin and Retainer Mounting Accessory Spring Accessory How to Order: 1. MB-825 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 213 C, 215 C, 254 UC and 256 UC. 2. Specify Bore Size for Item 2. (Frame size determines bore). 3. See Controls Section. Example: MB-825 Motor Brake per I Volt, /8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 1 QRO (442)

3 Motor Brake Heavy Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) holes equally spaced on dia. and within.004 of true position. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* /2-13 UNC-2A (4) on.250 dia * Min /2-14 NPSM Am. Std. straight pipe tap (2) holes 180 apart. Installation 4.18 * Mounting holes are within.006 of true position Drive End See Note D NEMA Frame Sizes Dim. D 213C & 215C or TC C & 256C or TC Min Shaft Size Static Torque Maximum Speed 80 lb. ft. 4,000 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. U L Information on inertia and weights begins on page 239. Coil data is on pages 250 and Warner Electric ( ) QRO (442)

4 Heavy Duty Drawing I (Shipped Assembled) Motor Brake MB-825 Flange Mounted Item Description Part Number Qty. 1 Cover Bushing* 1 1/2" to 1-1/2" Bore to Armature Hub Armature Assembly Armature Splined Adapter Autogap Accessory Screw Locknut Magnet Terminal Accessory Adapter Mounting Accessory Mounting Accessory How to Order: 1. MB-825 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 213 C, 215 C, 254 UC and 256 UC. 2. Specify Bore Size for Item 4. (Frame size determines bore). 3. See Controls Section. Example: MB-825 Motor Brake per I Volt, /8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 19 QRO (442)

5 Motor Brake Normal Duty MB-1000 Flange Mounted 1/4-20 UNC-3B (4) on dia. 5/16-18 UNC-3B (8) on dia.* /2-13 UNC-2A (4) on dia.* Min /8 dia. (2) holes 180 apart. Installation 4.50 * Mounting holes are within.006 of true position Drive End See Note Min. 4 Shaft Size Static Torque 160 lb. ft. Maximum Speed 3,600 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. U L Information on inertia and weights begins on page 239. Coil data is on pages 250 and Warner Electric ( ) QRO (442)

6 Normal Duty Drawing I Motor Brake MB-1000 Flange Mounted Item Description Part Number Qty. 1 Cover Bushing* 1 1/2" to 2-1/2" Bore to Armature Hub Armature Magnet - 90 Volt Terminal Accessory Adapter Mounting Accessory Drive Pin and Retainer Mounting Accessory Spring Accessory How to Order: 1. MB-1000 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 284 UC and 286 UC. 2. Specify Bore Size for Item 2. (Frame size determines bore). 3. See Controls Section. Example: MB-1000 Motor Brake per I Volt, 1-3/8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 181 QRO (442)

7 Motor Brake Heavy Duty MB-1000 Flange Mounted 1/4-20 UNC-3B (4) holes equally spaced on dia. and within.004 of true position. 5/16-18 UNC-3B (8) on dia.* /2-13 UNC-2A (4) holes equally spaced on dia.* Min Pilot 1/2-14 NPSM Am. Std. straight pipe tap (2) holes 180 apart. Position hub to this dimension 3.50/3.625 Installation 4.50 * Mounting holes are within.006 of true position Drive End See Note Min. 4 Shaft Size Static Torque 160 lb. ft. Maximum Speed 3,600 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. U L Information on inertia and weights begins on page 239. Coil data is on pages 250 and Warner Electric ( ) QRO (442)

8 Heavy Duty Drawing I Motor Brake MB-1000 Flange Mounted 4 (Shipped Assembled) Item Description Part Number Qty. 1 Cover Bushing* 1 3/4" to 2-11/16" Bore to Armature Hub Armature Assembly Armature Splined Adapter Autogap Accessory Screw Locknut Magnet Terminal Accessory Adapter Mounting Accessory Mounting Accessory How to Order: 1. MB-1000 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 284 UC and 286 UC. 2. Specify Bore Size for Item 4. (Frame size determines bore). 3. See Controls Section. Example: MB-1000 Motor Brake per I Volt, 1-3/8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 183 QRO (442)

9 Motor Brake Normal Duty MB-1225 Flange Mounted 1/4-20 UNC-3B (4) holes equally spaced on dia. 5/16-18 UNC- 3B (8) holes equally spaced on dia.* /2-13 UNC-2A (4) on dia.* 5/16-18 UNC-3B (4) on dia.* Min Pilot /8 dia. (2) holes 180 apart. Installation 4.93 * Mounting holes are within.006 of true position..843 Drive End See Note 6.85 D 184 U L NEMA Frame Sizes Dim. D 284C & 286C or TC 324C & 326C or TC 8 364C & 365C or TC Min Shaft Size Static Torque 260 lb. ft. Maximum Speed 3,000 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Warner Electric ( ) QRO (442)

10 Normal Duty Drawing I Motor Brake MB-1225 Flange Mounted Item Description Part Number Qty. 1 Cover Bushing* 1 1/2" to 2-1/2" Bore to Armature Hub Armature Magnet - 90 Volt Terminal Accessory Adapter Mounting Accessory Drive Pin and Retainer Mounting Accessory Spring Accessory How to Order: 1. MB-1225 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 284, 284 UC, 324 UC, 326 UC, 364 UC and 365 UC. 2. Specify Bore Size for Item 2. (Frame size determines bore). 3. See Controls Section. Example: MB-1225 Motor Brake per I Volt, 1-5/8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 185 QRO (442)

11 Motor Brake Heavy Duty MB-1225 Flange Mounted 1/4-20 UNC-3B (4) holes equally spaced on dia. and within.004 of true position. 5/16-18 UNC-3B (8) on dia.* /2-13 UNC-2A (4) on dia.* /8-16 UNC-2A (4) on dia.* Min Pilot Pilot 1/2-14 NPSM Am. Std. straight pipe tap (2) holes 180 apart. Installation Drive End See Note 6.85 D NEMA Frame Sizes 186 Dim. D 284C & 286C or TC 324C & 326C or TC 8 364C & 365C or TC Min Shaft Size Static Torque Maximum Speed 260 lb. ft. 3,000 rpm Standard Voltage D.C. 90 All dimensions are nominal unless otherwise noted. U L Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. QRO (442) Warner Electric ( )

12 Heavy Duty Drawing I (Shipped Assembled) Motor Brake MB-1225 Flange Mounted Item Description Part Number Qty. 1 Cover Bushing* 1 3/4" to 2-11/16" Bore to Armature Hub Armature Assembly Armature Splined Adapter Autogap Accessory Screw Locknut Magnet Terminal Accessory Adapter Mounting Accessory Mounting Accessory How to Order: 1. MB-1225 Adapts to NEMA C Face, Double Shaft Motors, Frame Sizes 284, 284 UC, 324 UC, 326 UC, 364 UC and 365 UC. 2. Specify Bore Size for Item 2. (Frame size determines bore). 3. See Controls Section. Example: MB-1225 Motor Brake per I Volt, 1-5/8" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file # These units are CSA certified under file #LR *See page 252 for specific part numbers. Refer to Service Manual P-208. Warner Electric ( ) 18 QRO (442)

Clutch Coupling. PCC-500 Normal Duty HUB VIEW COLLECTOR RING VIEW. Customer Shall Maintain: Warner Electric ( )

Clutch Coupling. PCC-500 Normal Duty HUB VIEW COLLECTOR RING VIEW. Customer Shall Maintain: Warner Electric ( ) Clutch Coupling PCC-00 Normal Duty See page 22 for.171.7 HUB VIEW.97 1/2-1 NPSM Am. std. straight pipe tap. 1.0 1. 1.0 See page 22 for details on Bushings..062 Min. running clearance..062 when new 1.17

More information

Installation Instructions

Installation Instructions Primary Brake Pin Drive Armature PB-825, PB-1000, PB-1225, PB-1525 Motor Brake and Spline Drive MB-825, MB-1000, MB-1225 Pin Drive P-208 819-036 Installation Instructions Contents Installation Instructions

More information

Installation Instructions

Installation Instructions Primary Clutch, Pin Drive Armature, Spline Drive Armature PC-825, PC-1000, PC-1225, PC-1525 Primary Clutch Coupling, Spline Drive Armature PCC-825, PCC-1000, PCC-1225, PCC-1525 P-206 819-0519 Installation

More information

Primary Clutch/Brake Pin Drive, Spline Drive PCB-825, PCB-1000, PCB-1225 Primary Clutch/Brake Coupling PCBC-825, PCBC-1000, PCBC-1225

Primary Clutch/Brake Pin Drive, Spline Drive PCB-825, PCB-1000, PCB-1225 Primary Clutch/Brake Coupling PCBC-825, PCBC-1000, PCBC-1225 Primary Clutch/Brake Pin Drive, Spline Drive PCB-825, PCB-1000, PCB-1225 Primary Clutch/Brake Coupling PCBC-825, PCBC-1000, PCBC-1225 P-205 819-0474 Installation Instructions Contents Installation Instructions

More information

Primary Brake Spline Drive Armature PB-825, PB-1000, PB-1225, PB-1525

Primary Brake Spline Drive Armature PB-825, PB-1000, PB-1225, PB-1525 Primary Brake Spline Drive Armature PB-825, PB-1000, PB-1225, PB-1525 P-209-WE 819-0517 Installation Instructions Contents Installation Instructions PB-825 PB-1000 PB-1225 PB-1525... 3 Coil Data... 5 Burnishing

More information

Installation Instructions

Installation Instructions P-214 819-0518 PCB-1225/1000, PCB-1525/1225 Clutch-Brake, Pin Drive, Spline Drive PCBC-1225/1000, PCBC-1525/1225 Clutch-Brake/Coupling Installation Instructions Contents Installation Instructions PCB-1225/1000

More information

MCS-203 Dancer Control

MCS-203 Dancer Control lectric rakes Tel: (O11) 4222-5040 ax: (011) 4201-2478. System eatures ull roll to core control Consistent tension, even during flying splices, rapid starts and emergency stops liminates web flutter to

More information

MCS-203 Dancer Control

MCS-203 Dancer Control lectric rakes System eatures n ull roll to core control n Consistent tension, even during flying splices, rapid starts and emergency stops n liminates web flutter to allow better registration control n

More information

PC-500 Clutch, PCC-500 Clutch Coupling, PCBC-500 Clutch/Brake Coupling P-203-WE

PC-500 Clutch, PCC-500 Clutch Coupling, PCBC-500 Clutch/Brake Coupling P-203-WE PC-500 Clutch, PCC-500 Clutch Coupling, PCBC-500 Clutch/Brake Coupling P-203-WE 819-0484 Installation Instructions Contents Installation Instructions PC-500 Pin Drive.... 3 PCC-500 Spline Drive... 7 PCC-500

More information

TB Series Brakes Tension Control System

TB Series Brakes Tension Control System TB Series Brakes Tension Control System P-235-WE Service & Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions...3 Coil Data...4 Maintenance...5 Control Connections...5

More information

SF-120, SF-170, SF-250, SF-400 Bearing Mounted, Flange Mounted, SFC-120, SFC-170, SFC-250, SFC-400 Bearing Mounted, Flange Mounted

SF-120, SF-170, SF-250, SF-400 Bearing Mounted, Flange Mounted, SFC-120, SFC-170, SFC-250, SFC-400 Bearing Mounted, Flange Mounted SF-120, SF-170, SF-250, SF-400 Bearing Mounted, Flange Mounted, SFC-120, SFC-170, SFC-250, SFC-400 Bearing Mounted, Flange Mounted P-0200-WE 819-0481 Installation Instructions An Altra Industrial Motion

More information

SFC-825, SFC-1000, SFC-1225, SFC-1525 Heavy Duty Clutch Coupling and SFC-1525 High Torque Heavy Duty Clutch Coupling

SFC-825, SFC-1000, SFC-1225, SFC-1525 Heavy Duty Clutch Coupling and SFC-1525 High Torque Heavy Duty Clutch Coupling SFC-825, SFC-1000, SFC-1225, SFC-1525 Heavy Duty Clutch Coupling and SFC-1525 High Torque Heavy Duty Clutch Coupling Installation Instructions P-207 819-0516 Contents Installation Instructions.......................3

More information

PB-500 Pin Drive, PB-500 Spline Drive PB-650 Pin Drive

PB-500 Pin Drive, PB-500 Spline Drive PB-650 Pin Drive PB-500 Pin Drive, PB-500 Spline Drive PB-650 Pin Drive P-204 819-0485 Installation Instructions Contents Installation Instructions PB-500 Pin Drive.......................3 PB-500 Spline Drive....................6

More information

Electro-Brake 375, 475, 650, 825, 1000, 1225

Electro-Brake 375, 475, 650, 825, 1000, 1225 Electro-Brake 375, 475, 650, 825, 1000, 1225 P-211-WE 819-0043 Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions.... 2 Electrical Coil Data.... 5 Burnishing

More information

Electrically Released Brakes

Electrically Released Brakes ER Series Electrically Released Brakes Specifications Inertia lb.ft. Weight lbs. Total Model Bore Size Voltage DC Static Torque lb. ft. Max. RPM Drive Arm. & Carrier Hub Arm. & Carrier Hub Weight lbs.

More information

Primary Brakes PB-120, PB-170, PB-250, PB-400

Primary Brakes PB-120, PB-170, PB-250, PB-400 Primary Brakes PB-120, PB-170, PB-250, PB-400 P-201-WE 819-0480 Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions PB-120 PB-170 PB-250 PB-400... 2-9 Electrical

More information

Electro-Packs EP-170, 250, 400, 500, 825, 1000, 1525

Electro-Packs EP-170, 250, 400, 500, 825, 1000, 1525 Electro-Packs EP-170, 250, 400, 500, 825, 1000, 1525 P-212 819-0078 Installation Instructions An Altra Industrial Motion ompany ontents Features............................. 2 Selection.............................

More information

For Dynamic Stopping and Cycling Applications

For Dynamic Stopping and Cycling Applications Electrically Released Brakes For Dynamic Stopping and Cycling Applications Warner Electric s modular design brakes and clutch/brake units offer material handling system users a high performance alternative

More information

Electrically Released Brakes FB-375, 475, 650

Electrically Released Brakes FB-375, 475, 650 P-237 819-0289 Electrically Released Brakes FB-375, 475, 650 Installation Instructions Contents Introduction............................ 3 Installing the Brake...................... 4 Power Supplies and

More information

ATC / ATB Series AT Clutches and Brakes

ATC / ATB Series AT Clutches and Brakes ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole

More information

Introduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on)

Introduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on) Introduction to Armature Actuated Brakes (AAB) The Armature Actuated Brakes are spring-set, electrically released, friction devices, which develop holding and braking torque in the absence of electrical

More information

ATC / ATB Series AT Clutches and Brakes

ATC / ATB Series AT Clutches and Brakes ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole

More information

EC / EB Series Electro Clutches and Brakes

EC / EB Series Electro Clutches and Brakes EC / EB Series Electro Clutches and Brakes Shaft Mounted Clutches and Brakes Shaft Mounted Clutches EC Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any

More information

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 P-273-4 819-0528 Installation Instructions Vented Enclosed Version Optional An Altra Industrial Motion Company Contents Mounting to a C-Face Motor........3

More information

EB Series Electro Brake

EB Series Electro Brake Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other

More information

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 P-273-4-WE 819-0528 Service & Installation Instructions Vented Enclosed Version Optional An Altra Industrial Motion Company Contents Mounting to a C-Face

More information

UM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180

UM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180 re-assembled, C-face Clutches and Brakes UniModules offer the ultimate in Clutch/ Brake performance and convenience. UniModules offer the same performance as EM s without the assembly required. Completely

More information

Preassembled Clutch/Electrically Released Brake Module

Preassembled Clutch/Electrically Released Brake Module P-273-2 819-0346 Preassembled Clutch/Electrically Released Brake Module Installation Instructions Contents For These UM Combinations Use These Installation Steps: Introduction...........................

More information

AC Motor Brakes. General Information. Features. Add-On Brakes. Spring Applied Power-Off Operation. Motor Brake Coil Current. Mounting.

AC Motor Brakes. General Information. Features. Add-On Brakes. Spring Applied Power-Off Operation. Motor Brake Coil Current. Mounting. Spring Applied Power-Off Operation Power-Off Operation Inertia Dynamics AC-style, spring applied motor brakes are designed to decelerate or park inertial loads when the voltage is turned off, either intentionally

More information

Preassembled Clutch/Electrically Released Brake Module

Preassembled Clutch/Electrically Released Brake Module Preassembled Clutch/Electrically Released Brake Module P-273-2-WE 819-0346 Installation Instructions An Altra Industrial Motion Company Contents Introduction... 2 Mounting to a Motor... 3 Mounting to a

More information

Electrically Released Brakes FB-375, 475, 650

Electrically Released Brakes FB-375, 475, 650 Electrically Released Brakes FB-375, 475, 650 P-0237-WE 819-0289 Installation Instructions An Altra Industrial Motion Company Contents Introduction... 3 Installing the Brake... 4 Power Supplies and Electrical

More information

EB Series Electro Brake

EB Series Electro Brake Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other

More information

Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors

Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop

More information

Combination Clutch/Brake Packages

Combination Clutch/Brake Packages Packaged CB Performance Series Clutch Products / Brakes Combination Clutch/Brake Packages CB Series clutch/brake combinations are designed for applications requiring a continuous rotational input being

More information

Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake

Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features

More information

Stearns Super-Mod Totally-Enclosed Non-Ventilated (TENV) Modules Featuring

Stearns Super-Mod Totally-Enclosed Non-Ventilated (TENV) Modules Featuring TENV/IP54 Super-Mod Clutch-Brake Modules Imagine a totally-enclosed, nonventilated clutch-brake ready to work right out of the box, requiring no modifications. And at a price competitive with open enclosure

More information

Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215

Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215 Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215 P-213-WE 819-0303 Service & Installation Instructions An Altra Industrial Motion Company Contents Pre-Installation Instructions................2 Installation

More information

Preassembled Clutch/Brake Module

Preassembled Clutch/Brake Module Preassembled Clutch/Brake Module P-273-1-WE 819-0343 Installation Instructions An Altra Industrial Motion Company Contents MountingtoaMotor...3 Mounting to a Reducer.............3 Installing the Base Mount...........4

More information

Section 5 MagnaShear (Fully Electric) Motor Brakes

Section 5 MagnaShear (Fully Electric) Motor Brakes APC-200 All Products Catalog Section MagnaShear (Fully Electric) Motor Brakes Force Control Industries, Inc. Main Office and Manufacturing Plant 30 Dixie Highway Fairfield, Ohio 4014 Telephone: (13) 88-0900

More information

Series 615 through 640; High Bearing Life Design; Nm up to Nm 3-4. Series 645 through 560; High Bearing Life Design; Nm up to Nm 5-6

Series 615 through 640; High Bearing Life Design; Nm up to Nm 3-4. Series 645 through 560; High Bearing Life Design; Nm up to Nm 5-6 MACHINE SERVICE, INC. 1000 Ashwaubenon Street - P.O. Box 10265 Green Bay, WI 54307-0265 Phone (920) 339-3000 - Fax (920) 339-3001 ISO 9001:2008 Certified Table of Contents Series 615 through 640; High

More information

Inertia of Rotating Parts Lb-Ft 2. Thermal Capacity HPS/Min.*

Inertia of Rotating Parts Lb-Ft 2. Thermal Capacity HPS/Min.* 60 Series Double C Brake Instructions NEMA 4X Washdown Housing Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing

More information

AT Clutch Major Service Sizes 25, 55, 115

AT Clutch Major Service Sizes 25, 55, 115 P-1404 819-0324 AT Clutch Major Service Sizes 25, 55, 115 Installation Instructions Contents Introduction............................ 2 Warranty....................... back cover Failure to follow these

More information

Coil Data Nominal Current MA Nominal VA Sealed Single Pole Normally Open (SPNO) White Rodgers Q

Coil Data Nominal Current MA Nominal VA Sealed Single Pole Normally Open (SPNO) White Rodgers Q 14/03/08 A136 Relay - General Purpose 90-293Q Enclosed fan relays used for switching single or two speed fan motors, solenoids, relays, resistive loads, heating and cooling applications and general purpose

More information

Thermal. Dimensions Torque Rotating. Rotating Capacity lb.ft. HPS/Min. Lb-Ft

Thermal. Dimensions Torque Rotating. Rotating Capacity lb.ft. HPS/Min. Lb-Ft Bulletin No. BK4755 (11/07) 1-70 Series End-Mount Brake Instructions NEMA 2 Enclosure Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself

More information

CB Series Clutch / Brake

CB Series Clutch / Brake CB Series Clutch / Brake CB-2 CB-4 CB-5 CB-6 CB-8 CB-10 25 lb.in. 120 lb.in. 250 lb.in. 500 lb.in. 2,500 lb.in. 5,000 lb.in. (2.825 N-m) (13.56 N-m) (28.25 N-m) (56.5 N-m) (282.5 N-m) (565 N-m) Maximum

More information

Advanced Technology Tension Clutches

Advanced Technology Tension Clutches P-220 819-0339 Advanced Technology Tension Clutches Installation Instructions Contents Installation................................. 2 Clutch Repair On the Shaft.................. 4 Clutch Service Major.......................

More information

Northstar RIM Tach Steps to Installation. K Wheel (Clamp Style)

Northstar RIM Tach Steps to Installation. K Wheel (Clamp Style) Northstar RIM Tach 8500 10 Steps to Installation K Wheel (Clamp Style) Mill Duty High Performance & Rugged Most Reliable magneto-resistive digital tach on the market today Ductile Iron Housing & Stainless

More information

SEM SERIES FEATURES SEM 7820 MAGNET SEM FEATURES

SEM SERIES FEATURES SEM 7820 MAGNET SEM FEATURES SEM 7820 MAGNET Die Cast, Floor mounted. SEM 7820 Total Projection = 6-3/4 (171 mm) SEM SERIES The Sentronic SEM 7800 Series are heavy duty, electrically controlled door holding magnets. Magnets are fail

More information

Selector Push Button Cat. No. 800T-K2AAXX. a b c d e f g Right Left Right Left. d, e, f, g. Contact Blocks. No contacts on operator

Selector Push Button Cat. No. 800T-K2AAXX. a b c d e f g Right Left Right Left. d, e, f, g. Contact Blocks. No contacts on operator NEMA Push Specifications 800T/H 30.5 mm Push s Selector Push Devices (Bul. 800T only) Selector Push Cat. No. 800T-K2AAXX 800T KD 2 G J D E a b c d e f g Right Left Right Left Blank C K KA KB KC KD KE a

More information

Rigid Metal Conduit, IMC or EMT K-Clamps

Rigid Metal Conduit, IMC or EMT K-Clamps 65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0

More information

M-SERIES MAGNITUDE LIGHTING MAGNETIC DIMMABLE CLASS 2 LED DRIVER QUICK SPECS ENCLOSURE DETAILS

M-SERIES MAGNITUDE LIGHTING MAGNETIC DIMMABLE CLASS 2 LED DRIVER QUICK SPECS ENCLOSURE DETAILS MAGNITUDE LIGHTING C DIMMABLE DIM DOWN TO 1% CLASS 2 12V DC P/N: M20L12DC-AR Magnitude's M20L12DC-AR is the most compact LED driver on the market with a magnetic transformer core. It is equipped with two

More information

60 Series End-Mount Brake Instructions Standard Housing

60 Series End-Mount Brake Instructions Standard Housing Bulletin No. BK4655 (04/18) 60 Series End-Mount Brake Instructions Standard Housing Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

More information

PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC

PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique

More information

Table of Contents. Introduction 1 Brake Selection 2

Table of Contents. Introduction 1 Brake Selection 2 Table of Contents Introduction 1 Brake Selection 2 Brake Basic Motor Frame Size () Enclosure Style Construction Series Pg Small AC & DC motors 3/8, 3/4 NEMA 2 End Mount Steel 40 40000-012 3 48C 1.5-6 NEMA

More information

available today from Warner Electric

available today from Warner Electric The next evolution in Module Brake Technology is available today from Warner Electric Warner Electric designed and patented the first electromagnetic clutch/brake more than 70 years ago and has pioneered

More information

6. Remove OEM bolts from engine at locations A, B, and C. Lay the wiring off to the side.

6. Remove OEM bolts from engine at locations A, B, and C. Lay the wiring off to the side. 700359 DewEze Clutch Pump Kit #700359 Ford 5.4L, 6.8L w/ and w/o A/C AA mount 1999- INSTALLATION INSTRUCTIONS 1. Disconnect the battery. 2. Drain the radiator. 3. Remove the air cleaner assembly. 4. Remove

More information

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications

More information

Procedure to Install the New Autogap components in ER-1225 and ER825 Brake with inverted Armature Hub

Procedure to Install the New Autogap components in ER-1225 and ER825 Brake with inverted Armature Hub Procedure to Install the New Autogap components in ER-15 and ER85 Brake with inverted P-30-1 819-0376 Installation & Operating Instructions Contents Introduction........................... Kit Parts List..........................

More information

General Purpose Relays Types K, R, N, and C

General Purpose Relays Types K, R, N, and C General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in

More information

Permanent Magnet Electrically Released Brakes

Permanent Magnet Electrically Released Brakes A L T R A I N D U S T R I A L M O T I O N Permanent Magnet Electrically Released Brakes Warner Electric Founded in 1927, Warner Electric has grown to become a global leader in the development of innovative

More information

LCN SEM SERIES FEATURES. SEM 7820 MAGNET Die Cast, Floor mounted. SEM 7870 MAGNET Die Cast, Dual Sided Floor mounted. SEM FEATURES

LCN SEM SERIES FEATURES. SEM 7820 MAGNET Die Cast, Floor mounted. SEM 7870 MAGNET Die Cast, Dual Sided Floor mounted. SEM FEATURES SEM 7820 Die Cast, Floor mounted. SEM 7820 The Sentronic SEM 7800 Series are heavy duty, electrically controlled door holding magnets. FEATURES Magnets are fail safe and hold until the current is interrupted.

More information

Eclipse Servo Motor Brake Flange Mounted, Spring Engaged, Air Released Split Hub, Clamp Collar Sizes 2, 3, 4, and 5 ECLIPSE PRODUCTS

Eclipse Servo Motor Brake Flange Mounted, Spring Engaged, Air Released Split Hub, Clamp Collar Sizes 2, 3, 4, and 5 ECLIPSE PRODUCTS ECLIPSE PRODUCTS TM TECHNICAL DATA SHEET Eclipse Servo Motor Brake Flange Mounted, Spring Engaged, Air Released Split Hub, Clamp Collar Sizes, 3, 4, and 5 ECLIPSE TM SERVO MOTOR BRAKE The Eclipse Servo

More information

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication

More information

800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.

800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position. 2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: A jumbo or large legend plate is recommended, if space allows. 2-Position Push-Pull Cat. No. 800T-F6D4 2-Position Metal Push-Pull

More information

Easy Access with Removable Cover Panel

Easy Access with Removable Cover Panel Mistral Brakes Modular design permits variable tensioning capacities! Wichita Clutch s Mistral pneumatic tension brakes are ideally suited to the needs of the corrugating market for which it was originally

More information

Shaft Mounted Clutches & Brakes

Shaft Mounted Clutches & Brakes A L T R A I N D U S T R I A L M O T I O N Shaft Mounted Clutches & Brakes Warner Electric Founded in 1927, Warner Electric has grown to become a global leader in the development of innovative electromagnetic

More information

T CLASS T FUSE BLOCKS

T CLASS T FUSE BLOCKS Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut

More information

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5-WE 819-0529 Service

More information

Installation Instructions

Installation Instructions Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5 819-0529 Installation

More information

Stearns Heavy Duty Clutches & Brakes... Rugged, Reliable

Stearns Heavy Duty Clutches & Brakes... Rugged, Reliable Stearns Heavy Duty Clutches & Brakes... Rugged, Reliable Stearns heavy duty clutches and brakes represent over 75 years of design, engineering and on-the-job experience. Stearns products are backed by

More information

NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors

NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors 70 SERIES DOUBLE C FACE BRAKE The Next Generation in Direct-Acting Brakes DIRECT REPLACEMENT for Stearns 87,700 Series Brakes DINGS TRADITIONAL

More information

EM Series Electro Module

EM Series Electro Module Individual lutch or Brake Module ombine to omprise a lutch, Brake or lutch/brake ombination Electro Modules are individual clutch or brake units which are assembled together to comprise a clutch, brake,

More information

LINEAR MOTION CONTROL PRODUCTS

LINEAR MOTION CONTROL PRODUCTS LINEAR MOTION CONTROL PRODUCTS Servomotor Brakes Eclipse Servomotor Brake The Eclipse Servomotor Brake family is a springengaged servomotor brakes equipped with a split hub, clamp collar for attachment

More information

Electro Clutches and Brakes Shaft Mounted Clutches and Brakes

Electro Clutches and Brakes Shaft Mounted Clutches and Brakes E/E Series Electro lutches and rakes Shaft Mounted lutches and rakes Shaft Mounted lutches E Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any through shaft

More information

PCB Relay. Contact form Terminal Single-side stable Single-winding latching

PCB Relay. Contact form Terminal Single-side stable Single-winding latching PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving

More information

Northstar RIM Tach Steps to Installation. J Wheel (Spoke Style Wheel)

Northstar RIM Tach Steps to Installation. J Wheel (Spoke Style Wheel) Northstar RIM Tach 8500 10 Steps to Installation J Wheel (Spoke Style Wheel) Mill Duty High Performance & Rugged Most Reliable magneto-resistive digital tach on the market today Ductile Iron Housing &

More information

Table of Contents. Special Application Brakes MARINE/MARITIME/NAVY APPLICATIONS...50 MINING BRAKES - MSHA CERTIFIED...51 ENCODER BRAKES...

Table of Contents. Special Application Brakes MARINE/MARITIME/NAVY APPLICATIONS...50 MINING BRAKES - MSHA CERTIFIED...51 ENCODER BRAKES... Table of Contents Performance Parameters and Limited Warranty................................................... Solenoid Actuated Brakes (SAB) Introduction..........................................................................................3-7

More information

INSTRUCTION INFORMATION FOR TYPE "DB" ELECTRIC DISC BRAKE (DB-0, DB-2, DB-4)

INSTRUCTION INFORMATION FOR TYPE DB ELECTRIC DISC BRAKE (DB-0, DB-2, DB-4) The Last Word in Cranes INSTRUCTION INFORMATION FOR TYPE "DB" ELECTRIC DISC BRAKE (DB-0, DB-2, DB-4) OPERATION Zenar's type "DB" brakes are classified as a holding or parking type electro-mechanical operated

More information

80 Series 4 Post Brake Instructions

80 Series 4 Post Brake Instructions Bulletin No. BK4604 (12/01) 80 Series 4 Post Brake Instructions Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing

More information

Powerful + Efficient + Reliable

Powerful + Efficient + Reliable 1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE

More information

Corrosion Protection for Electrical Conduit and Fittings

Corrosion Protection for Electrical Conduit and Fittings Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat

More information

INSTALLATION MANUAL. MB-250, MB-280 and MB-320 Motor Brake INSTALLATION. Force Control Industries, Inc. DESCRIPTION OPERATION

INSTALLATION MANUAL. MB-250, MB-280 and MB-320 Motor Brake INSTALLATION. Force Control Industries, Inc. DESCRIPTION OPERATION MB-250, MB-280 and MB-320 Motor Brake INSTALLATION MANUAL 512-250-001-00 DESCRIPTION Posistop Motor Brakes are multiple surface, spring activated, pneumatic release braking devices that effectively dissipate

More information

Packaged Electromagnetic Clutches/Brakes

Packaged Electromagnetic Clutches/Brakes A L T R A I N D U S T R I A L M O T I O N Packaged Electromagnetic Clutches/Brakes Altra Industrial Motion Boston Gear Boston Gear is a global supplier of quality power transmission products to most major

More information

Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1

Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1 Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine

More information

General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features

General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.

More information

3.1. NEMA Manual Starters. Contents Description Types B230, B330, Switches... MS Series, Single-Phase Starters...

3.1. NEMA Manual Starters.   Contents Description Types B230, B330, Switches... MS Series, Single-Phase Starters... Product Description The B100 Manual Motor Starters can be used in single-phase applications rated hp at 240 Vac or 2 hp at 20 Vdc. The starter can also be rated for three-phase applications up to 10 hp

More information

1.2. Pushbuttons and Indicating Lights. Contents Description Environmentally Sealed Toggle Switches E10E Product Selection

1.2. Pushbuttons and Indicating Lights.   Contents Description Environmentally Sealed Toggle Switches E10E Product Selection Toggle Switches E0E Contents Description Product Selection Molded-In Screw Terminal............. Econoswitch................................................ Technical Data and Specifications..........

More information

Bulletin 190-M Compact Starters. Selection Guide

Bulletin 190-M Compact Starters. Selection Guide Bulletin 190-M Selection Guide Bulletin 190-M Selection Guide 3 Bulletin 190-M Compact Design to 45mm Wide Common Adapter for Panel or DIN Rail Mounting Pre-Wired Assembly All Control Terminations Located

More information

Seismic Sensor Accessories SA, SV & ST 6000 Series

Seismic Sensor Accessories SA, SV & ST 6000 Series Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28

More information

CS24/25 SERIES CLUTCH SHIFT PTO

CS24/25 SERIES CLUTCH SHIFT PTO CS/ SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. CS/ PTO EXPLODED VIEWS Detail B Detail A Detail E Detail C Detail D DETAIL A OUTPUT SHAFT ASSEMBLY 7 CS/ STANDARD OUTPUT

More information

Crane Control Class 5010

Crane Control Class 5010 WB F s and Rectifiers Catalog CONTENTS Descriptions....................................................Page DC Magnetic Drum s General Information................................................. 14 Pricing

More information

Inverter (Vector) Duty: micromax TM 1000:1 Constant Torque (TENV), 20:1 Constant Torque (TEFC) Totally Enclosed

Inverter (Vector) Duty: micromax TM 1000:1 Constant Torque (TENV), 20:1 Constant Torque (TEFC) Totally Enclosed Inverter (Vector) Duty: micromax TM 1000:1 Constant Torque (TENV), 20:1 Constant Torque (TEFC) Totally Enclosed Applications: Designed for direct replacement of PMDC or any other variable speed application

More information

180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223

180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223 METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked

More information

Four armature sizes. Simple. Powerful. Controllable.

Four armature sizes. Simple. Powerful. Controllable. One of the keys to the Warner Electric tensioning system is the Electro Disc tension brake. Electro Disc brake systems are capable of continuous slip from full roll to core diameter while providing outstandingly

More information

Fractional HP Clutches/Brakes. A-Track Linear Actuators

Fractional HP Clutches/Brakes. A-Track Linear Actuators Fractional HP Clutches/Brakes A-Track Linear Actuators Page Pages 2 - Features Selection Guide Pages 4 - SF Series Pages 6-7 SFP Series SF Series clutches provide a bearing mounted clutch for use in parallel

More information

DC MOTORS NEMA FRAME SCR RATED

DC MOTORS NEMA FRAME SCR RATED NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque

More information

COMBISTOP NEW. Spring applied brakes

COMBISTOP NEW. Spring applied brakes COMBISTOP NEW Spring applied brakes With manufacturing sites on three continents and a global sales network KEB ensures worldwide availability and support of the KEB COMBISTOP 38. This latest generation

More information

INSTALLATION MANUAL FOR JABIRU 5100 AIRCRAFT ENGINE

INSTALLATION MANUAL FOR JABIRU 5100 AIRCRAFT ENGINE INSTALLATION MANUAL FOR JABIRU 5100 AIRCRAFT ENGINE This Manual has been prepared as a guide to correctly install the Jabiru 5100 engine into an airframe. Should you have any questions or doubts about

More information

Wrap Spring Clutches and Clutch/Brakes

Wrap Spring Clutches and Clutch/Brakes A L T R A I N D U S T R I A L M O T I O N Wrap Spring Clutches and Clutch/Brakes Wrap Spring Product Line CB Series SCB Series WSC Series Clutch/Brake Package Each CB Series unit is a completely self-contained,

More information

D4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN

D4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.

More information