Accuracy Build Credibility
|
|
- Tamsyn Kelly
- 6 years ago
- Views:
Transcription
1 Geeta Engineering Works Accuracy Build Credibility
2 Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING PIN SET, LOOSE PIN GAUGE, THREAD MEASURING WIRE SET, REVERSIBLE PLUG GAUGE, PLAIN PLUG GAUGE, PLAIN RING GAUGE, THREAD PLUG GAUGE, THREAD RING GAUGE, SNAP GAUGE, DOWEL PIN & PRECISION GRINDING JOB WORKS. Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER, GEAR MEASURMENT, DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others. We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES). We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients& traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers. We are always here to help!
3 Measuring Pin Set We use high Quality Tool Steel material. We Hardened use high (60-62HRC) Quality EN Ground 31 material. & Lapped MEASURING PINS are available in Standard Hardened Steps of 0.01, (60-62HRC) 0.02, 0.05, Ground 0.10 mm & Lapped & special MEASURING steps are also PINS available are on request. available Length of in MEASURING Standard Steps PINS of 0.01, up to Ø , 0.05, MM 0.10 is 40 mm MM & special above Ø MM it is 50MM. steps Engravings are also of pins available make on above request. Ø3 MM as per sizes. Length Measuring of MEASURING Pin set are available PINS up with to precise Ø1.49 MM std. wooden is 40 MM box. & above Ø Special MM Length it is 50MM. pins Ex. Length 55 MM TO 150 MM. available on request. Engravings LOOSE PINS of pins with Odd make sizes above are Ø3 available MM as per on request. sizes. Measuring PINS with Knob Pin set Sets are & available LOOSE with PINS precise with Knob std. available wooden box. on request. Special Length pins Ex. Length 55 MM TO 150 MM. available on request. LOOSE PINS with Odd sizes are available on request. PINS with Knob Sets & LOOSE PINS with Knob available on 1. TECHNICAL request. SPECIFICATION GRADE OF ACCURACY DIAMETRICAL TOLERANCE SURFACE FINISH HARDNESS A ±0.001MM 0.1µm 60 TO 62 HRC GRADE OF DIAMETRICAL SURFACE HARDNESS B ±0.002MM 0.1µm 60 TO 62 HRC ACCURACY TOLERANCE FINISH A ±0.001MM 0.1µm 60 TO 62 HRC B ±0.002MM 0.1µm 60 TO 62 HRC 1. TECHNICAL SPECIFICATION
4 Measuring Pin Set Step: 0.01 mm 0.50 To 1.00 MM Rs. 3,000/- Rs. 5,000/ To MM Rs. 3,800/- Rs. 5,300/ To MM Rs. 5,190 3,700/- Rs. 8,000 5,200/ To 4.00 MM Rs. 3,600/- Rs. 5,000/ To 5.00 MM Rs. 3,500/- Rs. 4,900/ To 6.00 MM Rs. 3,600/- Rs. 5,000/ To 7.00 MM Rs. 3,700/- Rs. 5,200/ To 8.00 MM Rs. 3,800/- Rs. 5,300/ To 9.00 MM Rs. 3,900/- Rs. 5,500/-
5 9.01 To MM Rs. 4,000/- Rs. 5,600/ To MM Rs. 4,300/- Rs. 6,000/ To 1 MM Rs. 4,500/- Rs. 6,300/ To MM Rs. 6,000/- Rs. 8,400/ To MM Rs. 6,300/- Rs. 8,800/ To MM Rs. 6,900/- Rs. 9,700/ To MM Rs. 7,000/- Rs. 9,800/ To MM Rs. 6,500/- Rs. 9,100/ To MM Rs. 6,800/- Rs. 9,500/-
6 17.51 To MM Rs. 7,100/- Rs. 9,900/ To MM Rs. 7,600/- Rs.10,600/ To MM Rs. 5,700/- Rs. 7,700/ To MM Rs. 5,700/- Rs. 8,000/- Measuring Pin Pin Set Step: 0.02 mm 0.50 To 1.00 MM Rs. 1,500/- Rs. 2,500/ To 4.00 MM Rs. 5,700/- Rs. 9,600/ To 7.00 MM Rs. 5,300/- Rs. 8,900/-
7 7.02 To MM Rs. 5,500/- Rs. 9,200/ To 1 MM Rs. 4,600/- Rs. 7,700/ To MM Rs. 6,150/- Rs.10,300/ To MM Rs. 6,950/- Rs.11,600/ To MM Rs. 7,200/- Rs.12,000/ To MM Rs. 7,800/- Rs.13,100/ To MM Rs. 5,900/- Rs. 9,900/-
8 Measuring Pin Pin Set Set Step: 0.05 mm 0.50 To MM Rs. 1,600/- Rs. 2,700/ To 7.00 MM Rs. 4,200/- Rs. 7,100/ To 1 MM Rs. 4,500/- Rs. 7,500/ To MM Rs. 6,000/- Rs.10,000/ To MM Rs. 4,500/- Rs. 7,600/ To MM Rs. 4,900/- Rs. 8,200/- Measuring Pin Pin Set Set Step: Step: mm mm 0.50 To 1 MM Rs. 5,700/- Rs. 9,500/ To MM Rs. 8,200/- Rs.13,700/-
9 Loose Pin Gauge Range 0.10 To 0.20 MM Rs. 260/- Rs. 360/ To 0.30 MM Rs. 200/- Rs. 280/ To 0.49 MM Rs. 150/- Rs. 250/ To MM Rs. 80/- Rs. 100/- /-//-/ To 1 MM Rs. 85/- Rs. 105/ To MM Rs. 100/- Rs. 140/ To MM Rs. 120/- Rs. 160/ To MM Rs. 150/- Rs. 240/ To MM Rs. 200/- Rs. 300/-
10 Reversible Plug Gauge The design enables the gauge member to be reversed in the handle to give up to twice the gauging life. in the handle to give up to twice the gauging life. Supplied as either Supplied as either Double Ended Double Member Ended Only Member Only Standard Gauge Tolerance: Standard Gauge Tolerance: IS: (please IS: advise alternative tolerance if required) Laser (please Engraving: advise alternative tolerance if required) GO / NOGO Sizes Laser Engraving: Material: GO / NOGO TOOL Sizes STEEL 60/62 Rc Pin Gauges with unilateral tolerance of +/ µm Material: EN 31 60/62 Rc Please indicate Plus or Minus tolerances when ordering Individual Pin Gauges are available. Pin Gauges with unilateral tolerance of +/ µm Please indicate Plus or Minus tolerances when ordering Individual Pin Gauges are available. 1. GO Gauging Member 2. NO GO Gauging Member 3. Wire Type Handle 4. Clamping Nut 5. Collet Bushing
11 Reversible Reversible Plug Plug Gauge Gauge Go NoGo Range Range 0.50 To MM Rs. 360/- Rs. 460/ To 4.50 MM Rs. 300/- Rs. 420/ To 7.00 MM Rs. 350/- Rs. 500/ To MM Rs. 400/- Rs. 560/ To MM Rs. 450/- Rs. 630/ To MM Rs. 500/- Rs. 700/ To MM Rs. 550/- Rs. 750/ To MM Rs. 600/- Rs. 850/-
12 Thread Measuring Wire Set We are the most reputed Thread Measuring Wire Exporter from Global. We are the most reputed Thread Measuring Wire Exporter from Global. The Thread Measuring Wire Set offered by us are widely sales in the Indian and international market due to the unmatched quality and inexplicable performance in respective applications. The Moreover Thread Measuring the Calibrated Wire Thread Set offered Measuring by us are Wires widely are sales used in to the check effective diameter of Thread Indian Measuring and international Wire, taps and market any due other to threads the unmatched and customer quality are also and eased the availability of the inexplicable standard consisting performance 16 Sizes. in respective applications. Moreover the Calibrated Application Thread Of Thread Measuring Measuring Wires Wire: are used to check effective diameter To check of Thread diameter Measuring of Thread Wire, Gauge, taps taps and and any any other other threads Threads. and customer are also eased the availability of the standard consisting 16 Our standard set consists of following 16 size in mm Sizes. The various ranges of our Thread Measuring Wire Set Loose Thread Measuring Wire Set Step 0.01 in mm Loose Thread Measuring Wire Set Step 0.01 in mm 0.17, 0.20, 0.21, 0.30, 0.31, 0.40, 0.41, 0.55, 0.56,, 1.51, 5.00, 0.17 To 0.20, 0.21 To 0.30, 0.31 To 0.40, 0.41 To 0.55, 0.56 TO, 1.51 To 5.00, 5.01 To 6.35, , Std Size in one Std Set 0.17 To Application 0.170, 0.190, 0.220, 0.250, 0.290, To check diameter of Thread Gauge, taps and any other Threads. size thread Measuring Wire Set are available in Two Wire Set and Three Wire Set. Our standard set consists of following 16 size in mm The various ranges of our Thread Measuring Wire Set size thread Measuring Wire Set are available in Two Wire Set and Three Wire Set. Formula Values E = Pitch Diameter W = Diameter of Wire Mw = Measurement over Wires Tangent Helix Angle = Lead / E N = Threads per inch
13 Std Size Loose Thread Measuring 2 Wire MM Rs. 1,300/- Rs. 1,600/ MM Rs. 1,300/- Rs. 1,600/ MM Rs. 950/- Rs. 1,200/ MM Rs. 850/- Rs. 1,000/ MM Rs. 850/- Rs. 1,000/ MM Rs. 850/- Rs. 1,000/ MM Rs. 950/- Rs. 1,200/ MM Rs. 950/- Rs. 1200/ MM Rs. 950/- Rs. 1200/-
14 0.620 MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/ MM Rs. 850/-
15 4.050 MM Rs. 850/ MM Rs. 850/ MM Rs. 750/- Rs. 950/- Std Size Thread Measuring 3 Wire Set MM Rs. 1,800/- Rs. 2,300/ MM Rs. 1,800/- Rs. 2,300/ MM Rs. 1,600/- Rs. 2,100/ MM Rs. 1,600/- Rs. 2,100/ MM Rs. 1,600/- Rs. 2,100/ MM Rs. 1,400/- Rs. 1,800/-
16 0.390 MM Rs. 1,400/- Rs. 1,800/ MM Rs. 1,300/- Rs. 1,600/ MM Rs. 1,300/- Rs. 1,700/ MM Rs. 1,000/- Rs. 1,500/ MM Rs. 1,000/- Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/-
17 2.050 MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 1,500/ MM Rs. 700/-
18 Plain Plug Gauge & Ring Gauge Geeta Engineering Works is also Leading Manufacturer of Plain Plug Gauge, Plain Ring Gauge. Plain Plug Gauge & Ring Gauge also available Go and NoGo Gauge used to efficiently inspect external & internal dimensions of manufactured parts. This Gauge can quickly pass or fail your product without taking time consuming The Gauges offered by us are widely used in the aeronautical industry. Manufactured using quality approved materials. We consider quality to be our priority. The entire range of the Gauges is reasonably priced by us. Technical Material : OHNS(Oil harderned non sinking steel) Accuracy : Plain Plug IS : 6137 : 1983 & IS : 6244 : 1980 Accuracy : Plain Ring IS : 3485 : 1983 Hardness : 60 ± 62 HRC Diameter : Plug Gauge : 25 MM To 250 MM Ring Gauge : 5 MM To 250 MM
19 Plain Plug Gauge Go and NoGo 25 MM To 39 MM Rs. 700/- Rs. 1,000/- 40 MM To 49 MM Rs. 800/- 50 MM To 59 MM Rs. 900/- Rs. 1,200/- 60 MM To 69 MM Rs. 1,000/- Rs. 1,400/- 70 MM To 79 MM Rs. 1,300/- Rs. 1,800/- 80 MM To 89 MM Rs. 1,400/- Rs. 2,000/- 90 MM To 99 MM Rs. 1,700/- Rs. 2,400/- 100 To 119 MM Rs. 1,800/- Rs. 2,500/- 120 To 139 MM Rs. 1,900/- Rs. 2,700/-
20 140 MM To 159 MM Rs. 2,000/- Rs. 2,800/- 160 MM To 179 MM Rs. 2,300/- Rs. 3,200/- 180 MM To 199 MM Rs. 2,500/- Rs. 3,500/- 200 MM To 224 MM Rs. 2,800/- Rs. 4,000/- 225 MM To 250 MM Rs. 3,000/- Rs. 4,200/-
21 Plain Setting Master Ring Gauge Go and NoGo 5 MM To 19 MM Rs. 800/- 20 MM To 39 MM Rs. 900/- Rs. 1,200/- 40 MM To 49 MM Rs. 1,000/- Rs. 1,400/- 50 MM To 69 MM Rs. 1,600/- 70 MM To 79 MM Rs. 1,300/- Rs. 1,800/ MM To To MM Rs. 5,190 1,500/- Rs. 8,000 2,100/- 90 MM To 99 MM Rs. 2,000/- Rs. 2,800/- 100 MM To 109 MM Rs. 2,500/- Rs. 3,500/- 110 MM To 119 MM Rs. 3,000/- Rs. 4,200/-
22 120 MM To 129 MM Rs. 3,500/- Rs. 4,900/- 130 MM To 139 MM Rs. 4,000/- Rs. 5,600/- 140 MM To 149 MM Rs. 5,000/- Rs. 7,000/- 150 MM To 169 MM Rs. 6,000/- Rs. 8,500/- 170 MM To 189 MM Rs. 7,000/- Rs. 10,000/- 190 MM To 209 MM Rs. 10,000/- Rs. 14,000/- 210 MM To 229 MM Rs. 13,000/- Rs. 6,000/- 230 MM To 250 MM Rs. 15,000/- Rs. 21,000/-
23 Snap Gauge Geeta Engineering Works is also Leading Manufacturer of Snap gauge. Snap Gauge are used for inspection of external measurement of diameter & width of a final product is required. Snap gauge are easy to use and inspect faster and more accurate. This Gauge quickly verifies whether an outside dimension of a part matches a preset dimension or falls within predefined tolerances. Snap gage is available with Single & Double Ended. This Gauge permanently or temporarily fixed measurement. The entire range of the Gauges is reasonably priced by us. Technical Material : OHNS(Oil harderned non sinking steel) Accuracy : IS : 3455 : 1971 / 8023 : 1991 Hardness : 60 ± 62 HRC Diameter : 0.30 MM to 500 MM
24 Snap Gauge Single Ended Range 0.30 MM To 3.50 MM Rs. 1,400/- Rs. 1,900/ MM To 39 MM Rs. 800/- 40 MM To 49 MM Rs. 900/- Rs. 1,300/- 50 MM To 59 MM Rs. 1,000/- Rs. 1,400/- 60 MM To 79 MM Rs. 1,500/- 80 MM To 89 MM Rs. 1,300/- Rs. 1,800/- 90 MM To 99 MM Rs. 1,600/- Rs. 2,200/- 100 MM To 119 MM Rs. 1,900/- Rs. 2,600/- 120 MM To 134 MM Rs. 2,500/- Rs. 1,200/-
25 135 MM To 174 MM Rs. 3,000/- Rs. 4,200/- 175 MM To 224 MM Rs. 4,000/- Rs. 5,600/- 225 MM To 274 MM Rs. 5,000/- Rs. 7,000/- 275 MM To 299 MM Rs. 6,000/- Rs. 8,400/- 300 MM To 349 MM Rs. 8,000/- Rs. 11,200/- 350 MM To 399 MM Rs. 11,000/- Rs. 15,400/- 400 MM To 424 MM Rs. 12,000/- Rs. 16,800/- 425 MM To 474 MM Rs. 13,000/- Rs. 18,200/- 475 MM To 500 MM Rs. 15,000/- Rs. 21,000/-
26 Snap Gauge Double Ended Range 0.30 MM To 3.50 MM Rs. 1,500/- Rs. 2,100/ MM To 19 MM Rs. 900/- Rs. 1,200/- 20 MM To 39 MM Rs. 1,000/- Rs. 1,400/- 40 MM To 49 MM Rs. 1,500/- 50 MM To 59 MM Rs. 1,200/- Rs. 1,700/- 60 MM To 69 MM Rs. 1,300/- Rs. 1,800/- 70 MM To 79 MM Rs. 1,400/- Rs. 1,900/- 80 MM To 89 MM Rs. 1,500/- Rs. 2,100/- 90 MM To 99 MM Rs. 1,600/- Rs. 2,200/-
27 Thread Gauge Geeta Engineering Works is also Leading Manufacturer of Thread Plug Gauge, Thread Ring Gauge. We offer a full line of English and Metric threaded ID gauges. We make & follow ISO, B.A, Unified, BSW BSF, N.P.T Taper Screw, B.S.P.T, B.S. Cycle, G- Series (Formally BSP- F) Thread type of gauges. Thread Plug Gauge & Thread Ring Gauge available Go and NoGo. Thread Gauge use to check that the internal & external threading fits the counterpart external & internal thread. Thus it checks that the minimum pitch diameter has been maintained, which includes the effects of pitch, flank angle and thread profile deviations. We offer Acme, Buttress, Taper, Mod, Square, PG, BS Conduit, Trapezodial types of threading Gauge. The entire range of the Gauges is reasonably priced by us. Technical Material: OHNS(Oil harderned non sinking steel) Basic Dimension : - IS, B.S, ANSI, Precision: 6H, 6g, 2A, 2B Diameter: 2 to 100 mm
28 ISO Metric Thread Gauges IS 2318 PART III 1999 NORMAL DIAMETER PITCH THREAD PLUG 6H CLASS MANUFACTUR. PRICE THREAD PLUG 6H CLASS THREAD RINGS 6G CLASS MANUFACTUR PRICE THREAD RINGS 6G CLASS 2 MM /- Each MM /- Each MM /- Each 3 MM /- Each 900/- Each 800/- Each 3.5 MM /- Each 900/- Each 800/- Each 4 MM /- Each 800/- Each 100/- Each 1500/- Each 4.5 MM /- Each 900/- Each 1200/- Each 900/- Each 1200/- Each 150/- Each 5 MM /- Each 900/- Each 1200/- Each 1500/- Each 5.5 MM /- Each 1200/- Each 1500/- Each 6 MM & 7 MM /- Each 900/- Each 1200/- Each 1500/- Each 8 MM & 9 MM /- Each 600/- Each 900/- Each 1200/- Each 1500/- Each 10 MM & 11 MM /- Each 600/- Each 600/- Each 900/- Each 1200/- Each 800/- Each 800/- Each 800/- Each 1600/- Each 2200/- Each 12 MM /- Each MM /- Each
29 NORMAL DIAMETER PITCH THREAD PLUG 6H CLASS MANUFACTUR. PRICE THREAD PLUG 6H CLASS THREAD RINGS 6G CLASS MANUFACTUR PRICE THREAD RINGS 6G CLASS 15 MM 900/- Each 1200/- Each 1500/- Each MM /-Each 1000/-Each 17 MM 900/- Each 1200/- Each 1200/- Each MM 20 MM 22 MM /- Each 800/- Each 800/- Each 1600/- Each 2200/- Each 2000/- Each 24 MM /- Each 800/- Each 800/-Each 1100/-Each 1200/- Each 1200/- Each 2000/- Each MM /- Each 900/- Each 1200/- Each 1200/- Each 1600/- Each 2200/- Each 2000/- Each 2000/- Each 26 MM 2000/- Each 27 MM /- Each 1500/- Each 1500/- Each 1500/- Each 2100/- Each /- Each 2000/- Each 28 MM /- Each 1 30 MM /- Each /- Each 1300/- Each 2200/- Each 2200/- Each 3100/- Each 3100/- Each
30 NORMAL DIAMETER PITCH THREAD PLUG 6H CLASS MANUFACTUR. PRICE THREAD PLUG 6H CLASS THREAD RINGS 6G CLASS MANUFACTUR PRICE THREAD RINGS 6G CLASS 32 MM 1300/- Each 2 33 MM /- Each /- Each 1300/- Each 2200/- Each 3000/- Each 35 MM 1300/- Each 2 36 MM /- Each /- Each 1300/- Each 2200/- Each 3000/- Each 38 MM 1300/- Each 2 39 MM /- Each /- Each 1300/- Each 2200/- Each 3000/- Each 40 MM /- Each 1300/- Each 2200/- Each 3000/- Each 42 MM /- Each 1500/- Each 1500/- Each 2800/- Each 2100/- Each 2100/- Each 3100/- Each 2600/- Each 2200/- Each 2200/- Each 4300/- Each 3600/- Each 3000/- Each 3000/- Each 45 MM /- Each 1500/- Each 1500/- Each 2800/- Each 2100/- Each 2100/- Each 3100/- Each 2600/- Each 2200/- Each 2200/- Each 4300/- Each 3600/- Each 3000/- Each 3000/- Each
31 NORMAL PITCH THREAD PLUG THREAD PLUG THREAD RINGS THREAD RINGS DIAMETER 6H CLASS 6H CLASS 6G CLASS 6G CLASS MANUFACTUR. PRICE MANUFACTUR PRICE 48 MM /- Each 3900/- Each 3200/- Each 4500/- Each /- Each 3900/- Each /- Each 2800/- Each 2600/- Each 3600/- Each 1500/- Each 2100/- Each 2200/- Each 3000/- Each /- Each 2100/- Each 2200/- Each 3000/- Each 50 MM /- Each 2800/- Each 2600/- Each 3600/- Each 1500/- Each 2100/- Each 2200/- Each 3000/- Each 1500/- Each 2100/- Each 2200/- Each 3000/- Each 52 MM /- Each 4200/- Each 4100/- Each /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 55 MM /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 56 MM /- Each 4500/- Each 4100/- Each /- Each 4300/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 58 MM /- Each 4500/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 60 MM /- Each 4500/- Each 4100/- Each /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each
32 NORMAL PITCH THREAD PLUG THREAD PLUG THREAD RINGS THREAD RINGS DIAMETER 6H CLASS 6H CLASS 6G CLASS 6G CLASS MANUFACTUR. PRICE MANUFACTUR PRICE 62 MM /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 64 MM /- Each 4900/- Each 4500/- Each 6300/- Each /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 65 MM /- Each 4200/- Each 3800/- Each 5300/- Each /- Each 4900/- Each 68 MM /- Each 5500/- Each 4500/- Each 6300/- Each 70 MM /- Each 5000/- Each 3800/- Each 5300/- Each 72 MM /- Each 3900/- Each 3500/- Each 4900/- Each MM /- Each 5000/- Each 3800/- Each 5300/- Each /- Each 3900/- Each 3500/- Each 4900/- Each MM 2300/- Each 3200/- Each /- Each 82 MM 76 MM /- Each 7000/- Each 6000/- Each 8400/- Each 80 MM /- Each 5500/- Each 5000/- Each 7000/- Each 85 MM /- Each 4300/- Each 4800/- Each 6 90 MM 3500/- Each 5600/- Each 95 MM 3500/- Each 5600/- Each 100 MM
33 Unified Thread Gauge ANSI B NORMAL DIAMETER T.P.I THREAD PLUG 2B CLASS MANUFACTUR. PRICE THREAD PLUG 2B CLASS THREAD RINGS 2A CLASS MANUFACTUR PRICE THREAD RINGS 2A CLASS No-04 No UNC 40 UNC 1200/- Each ALL 1 ALL No-08 No-10 No UNC 28 UNC 24 UNC 48 UNF 40 UNF 36 UNF 32 UNF 28 UNF No UNEF 800/- Each 1600/- Each 2200/- Each 1/4 20 UNC 28 UNF 32 UNEF 800/- Each 1600/- Each 2200/- Each 5/16 18 UNC 24 UNF 3/8 16 UNC 24 UNF 7/6 14 UNC 20 UNF 1/2 13 UNC 20 UNF 9/16 12 UNC 18 UNF 800/- Each 5/8 11 UNC 18 UNF 800/- Each 1500/- Each 3/4 10 UNC 16 UNF 20 UNEF 1200/- Each 900/- Each 1300/- Each /- Each 1200/- Each 2000/- Each /- Each
34 NORMAL DIAMETER T.P.I THREAD PLUG 2B CLASS MANUFACTUR. PRICE THREAD PLUG 2B CLASS THREAD RINGS 2A CLASS MANUFACTUR PRICE THREAD RINGS 2A CLASS 7/8 9 UNC 14 UNF 20 UNEF 1500/- Each 900/- Each 1300/- Each 2100/- Each 1200/- Each 1200/- Each 2000/- Each /- Each 1 8 UNC 12 UNF 20 UNEF 1500/- Each 900/- Each 1300/- Each 2100/- Each 1200/- Each 1600/- Each 2200/- Each 2200/- Each 3100/- Each 1.1/8 7 UNC 12 UNF 16 UN 1300/- Each 1300/- Each 3600/- Each 5000/- Each /4 7 UNC 8 UN 12 UNF 16 UN 3600/- Each 3600/- Each 2300/- Each 2300/- Each 5000/- Each 5000/- Each 3200/- Each 3200/- Each 1.3/8 1.1/2 6 UNC 8 UN 12 UN 12 UNF 16 UN 3600/- Each 3600/- Each 2300/- Each 2300/- Each 2300/- Each 5000/- Each 5000/- Each 3200/- Each 3200/- Each 3200/- Each 1.5/8 8 UN 12 UNF 16 UN /- Each /- Each 2600/- Each 2600/- Each /- Each 3600/- Each 1.3/4 5 UNC 8 UN 12 UN 16 UN 3500/- Each /- Each /- Each 4100/- Each 2600/- Each 2600/- Each 7800/- Each /- Each 3600/- Each 1.7/8 & 2 8 UN 12 UN 16 UN /- Each 2100/- Each 3800/- Each 4200/- Each 2600/- Each 2600/- Each 5900/- Each 3600/- Each 3600/- Each UNC 3600/- Each 5000/- Each 3800/- Each 3800/- Each
35 NORMAL DIAMETER T.P.I THREAD PLUG 2B CLASS MANUFACTUR. PRICE THREAD PLUG 2B CLASS THREAD RINGS 2A CLASS MANUFACTUR PRICE THREAD RINGS 2A CLASS 2.1/4 4.5 UNC 8 UN 12 UN 16 UN 4200/- Each 3200/- Each 5900/- Each 4500/- Each 3300/- Each 3300/- Each 6200/- Each 6500/- Each /- Each /8 8 UN 12 UN 16 UN 3200/- Each 4500/- Each 3300/- Each 3300/- Each 4500/- Each 6300/- Each /12 4 UNC 8 UN 12 UN 16 UN 4200/- Each 3200/- Each 3300/- Each 4500/- Each 3300/- Each 3300/- Each 6200/- Each 4500/- Each /- Each /8 8 UN 12 UN 16 UN 3800/- Each 5300/- Each 3500/- Each 3500/- Each 4500/- Each 6300/- Each /4 4 UNC 4400/- Each 6200/- Each 5000/- Each 7000/- Each 2.3/4 & 2.7/8 8 UN 12 UN 16 UN 3800/- Each 5300/- Each 3500/- Each 3500/- Each 4500/- Each 6300/- Each & 3.1/4 4 UNC 8 UN 12 UN 16 UN 5400/- Each 4300/- Each 3000/- Each 3000/- Each 5400/- Each 6000/- Each 4200/- Each 4200/- Each 7800/- Each 5600/- Each 4400/- Each 4400/- Each 10900/- Each 7800/- Each 6100/- Each 6100/- Each 3.1/2 & 3.3/4 4 UNC 8 UN 12 UN 16 UN 6600/- Each 5400/- Each 3600/- Each 3600/- Each 9200/- Each 7500/- Each 5000/- Each 5000/- Each 8000/- Each 7100/- Each 5600/- Each 5600/- Each 11200/- Each 9900/- Each 7800/- Each 7800/- Each 4 4 UNC 8 UN 12 UN 16 UN 6800/- Each 5600/- Each 3800/- Each 3800/- Each 9500/- Each 7800/- Each 5300/- Each 5300/- Each 9800/- Each 7100/- Each 5600/- Each 5600/- Each /- Each 7800/- Each 7800/- Each
36 BSW - BSF Thread Gauge BS 84 :1956 NORMAL DIAMETER PITCH SCREW PLUG MANUFACTUR. PRICE SCREW PLUG SCREW RING GO & NoGo MANUFACTUR PRICE SCREW RING GO & NoGo 1/8 40 BSW 2600/- Each 3600/- Each 3500/- Each 4900/- Each BSW 32 BSF 3500/- Each 3300/- Each 4900/- Each BSW 26 BSF 3300/- Each 5/16 18 BSW 22 BSF 3300/- Each BSW 20 BSF 3300/- Each 7/16 14 BSW 18 BSF 3300/- Each 1/2 12 BSW 16 BSF 3300/- Each 5/8 11 BSW 14 BSF 2100/- Each 3200/- Each 3300/- Each 3/4 10 BSW 12 BSF 2100/- Each 3500/- Each 4600/- Each 6400/- Each 7/8 9 BSW 11 BSF 2100/- Each 3500/- Each 4600/- Each 6400/- Each 1 8 BSW 10 BSF /- Each /- Each 1.1/8 7 BSW 9 BSF 4400/- Each 4100/- Each 6100/- Each /- Each 8500/- Each 1.1/4 7 BSW 9 BSF 4400/- Each 4100/- Each 6100/- Each /- Each 9500/- Each 1.1/2 6 BSW 8 BSF 5100/- Each /- Each 6600/- Each 6800/- Each 9500/- Each
37 I.S.Taper Thread Gauge (B.S.P.T) IS NORMAL DIAMETER T.P.I PLUG RC SYSTEM B or SYSTE A MANUFACTUR. PRICE PLUG RC SYSTEM B or SYSTE A PLUG R SYSTEM B or SYSTE A MANUFACTUR PRICE PLUG R SYSTEM B or SYSTE A 1/ /- Each 3600/- Each 2600/- Each 3600/- Each 1/ /- Each 5300/- Each 7400/- Each 1/ /- Each 2800/- Each 4400/- Each 6100/- Each 3/ /- Each 2800/- Each 4400/- Each 6100/- Each 1/ /- Each 2800/- Each 4400/- Each 6100/- Each 3/ /- Each 2800/- Each 4300/- Each 6000/- Each /- Each 5500/- Each 7 1.1/ /- Each 5500/- Each 7 1.1/ /- Each 5500/- Each /- Each 4600/- Each 7100/- Each 9900/- Each 2.1/ /- Each /- Each 9900/- Each /- Each /- Each 9900/- Each /- Each 8500/- Each 10800/- Each 15100/- Each /- Each 10500/- Each 12800/- Each 17900/- Each /- Each /- Each British Association (B.A) Screw Gauge B.S Size Screw Plugs D/E MANUFACTUR. PRICE Screw Plugs D/E Screw Ring MANUFACTUR PRICE Screw Ring 0 BA 3300/- Each 3200/- Each 4500/- Each 2 BA 3300/- Each 3200/- Each 4500/- Each 4 BA 2600/- Each 3600/- Each 3500/- Each 4900/- Each 6 BA 4100/- Each 5 8 BA 4100/- Each 5
38 G Series ( Formally BSP F ) Thread Gauge IS : NORMAL DIAMETER PITCH SCREW PLUG D/E Go & NoGo MANUFACTUR. PRICE SCREW PLUG D/E Go & NoGo SCREW RING D/E Go & NoGo MANUFACTUR PRICE SCREW RING D/E Go & NoGo G 1/ /- Each 3100/- Each G 1/8 28 G 1/4 19 G 3/8 19 G 1/ /- Each G 5/ /- Each /- Each G 3/ /- Each /- Each G 7/ /- Each /- Each G /- Each 4500/- Each G 1.1/ /- Each 4500/- Each G 1.1/ /- Each 4500/- Each G 1.3/ /- Each 4500/- Each G 1.1/ /- Each 4500/- Each G /- Each 3800/- Each G /- Each 3600/- Each 4100/- Each 5300/- Each G /- Each 4300/- Each 5200/- Each 7300/- Each G /- Each 5000/- Each 6600/- Each 9200/- Each G /- Each 5000/- Each 8100/- Each 11300/- Each G /- Each /- Each 1 B.S Cycle Thread Gauge BS : DIAMETER MANUFACTUR. PRICE MANUFACTUR PRICE 1/ /- Each 3100/- Each 2800/- Each 3900/- Each /- Each 3100/- Each 2800/- Each 3900/- Each /- Each 3300/- Each /- Each 3300/- Each 1/ /- Each 3300/- Each /- Each 3300/- Each
39 DIAMETER MANUFACTUR. PRICE MANUFACTUR PRICE /- Each 3300/- Each 3/ /- Each 3300/- Each /- Each 3300/- Each 1/ /- Each 3300/- Each 9/ /- Each 3300/- Each 5/ /- Each 11/ /- Each 3/ /- Each 3600/- Each 3200/- Each 4500/- Each /- Each 3600/- Each 3200/- Each 4500/- Each N.P.T Taper Screw Gauge ANSI/AME : B DIAMETER T.P.I PLUG BASIC STEP MANUFACTUR. PRICE PLUG MIN/MAX STEP MNF. PRICE RING MIN/MAX STEP MNF. PRICE RING MIN/MAX STEP MNF. PRICE 1/ /- Each 3000/- Each 3900/- Each 1/ /- Each 3000/- Each 3900/- Each 1/ /- Each 3/ /- Each 1/ /- Each 2800/- Each 3100/- Each 3/ /- Each 2800/- Each 3100/- Each /2 2000/- Each 2300/- Each 3500/- Each 4400/- Each 1.1/4 11.1/2 2000/- Each 2300/- Each 3500/- Each 4400/- Each 1.1/2 11.1/2 2000/- Each 2300/- Each 3500/- Each 4400/- Each /2 2600/- Each 3100/- Each 4200/- Each 5400/- Each 2.1/ /- Each 3800/- Each 4800/- Each 5400/- Each /- Each 3800/- Each 4800/- Each 5600/- Each 3.1/ /- Each 3800/- Each 4800/- Each 5600/- Each /- Each 5600/- Each 7100/- Each 8200/- Each 4.1/ /- Each 6100/- Each 7100/- Each 8600/- Each /- Each 6600/- Each 8100/- Each 9400/- Each /- Each 6600/- Each 8100/- Each 9
40 Centerless Grinding Services Geeta Engineering Works is leading success full Co. engaged in providing Center less Grinding Service. Our experienced professionals render these services using the advanced machines and technologies. We using modern technology and advanced tools in adherence to set quality standards. as well as providing grinding services directly to our customers such as bar stock conversion, thrufeed & infeed grinding, i.d. & o.d. grinding, & blanchard grinding,. We can meet your requirements for almost any job, large or small qty, your material or ours. Let Centerless grinding service be your full service grinding source. Application Machine Type : High- Life 1005 Hydraulic We can make 0.1 MM to 25 MM Grinding Work Diameter of Length With 10 Micron Tolerance
41 Copper Washer We are one of the largest producers of Copper Washers, Aluminum Washer Copper is a good conductor of heat and electricity, Copper Washer are often used within for Hydraulic Sealing, Piping, Electronics, Household Products, and Biomedical applications as copper is malleable and ductile a biostatic. Our state of the art plant produces high end Copper washers to international standards. Our Copper washers are accepted in 32 countries of the world with monthly production of To Nos. Thickness of Copper washers : Presently we offer Copper washers in the range of 1 mm to 3 mm in thickness needed by our overseas customers. Special thickness provided on demand(above 3mm & below 1mm) Size of 2, 3, 4, 5 & above 5 & 50 mm TO 300 mm Available on demand Finish of Copper washers & Aluminum Washer : Natural, Material used for Copper washers manufacturing: High quality 99.9% copper sheet
42 Contact Us. Asha Niwas, Satav plot, Akashwani, Hadapsar, Pune , Maharashtra, India. Mobile : Mobile : Web : gaugesworld@gmail.com info@gaugeworlds.com Working Day. Mon Tue Wen Thus Fri Sat Sun : 9.30 Am to 6.00 Pm. : 9.30 Am to 6.00 Pm. : 9.30 Am to 6.00 Pm. : 9.30 Am to 6.00 Pm. : 9.30 Am to 6.00 Pm. : 9.00 Am to 6.00 Pm. : Head Office Off
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
More information(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
More informationUNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationPLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationLEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationTHREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationTESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationD24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationmember sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationMINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationTOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationSkirted GEN III - Technical Notes
DART Skirted GEN III - Technical Notes Deck Height... 9.240-9.450 STD or Raised cam, 9.750 9.950 Raised cam only Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 115lbs 4.125 and
More informationAluminum Small Block Chevy - Technical Notes
DART Aluminum Small Block Chevy - Technical Notes Deck Height... 9.240-9.450 STD or Raised cam, 9.750 9.950 Raised cam only Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558 2.559 ) Weight... 115lbs
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationH T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationInternal Measurement. Internal Measurement C-1
Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationList Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationQuadThread. Internal. For Thread Turning
QuadThread Internal For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
More informationCALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
More informationTORQUE LIMITER SERIES 200
TORQUE LIMITER SERIES 200 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.
More informationMEET OUR TEAM. North American Tool Corporation 215 Elmwood Avenue, PO Box 116, South Beloit, IL CURTIS LANSBERY PRESIDENT & CEO
MEET OUR TEAM CURTIS LANSBERY PRESIDENT & CEO BRIAN KOBISCHKA VICE PRESIDENT & CFO PHIL SAMUELS DIRECTOR OF SALES & MARKETING JEFF SHERMAN DIRECTOR OF MANUFACTURING JON ANDERSON JOY BALDWIN BARB BISHOP
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationIntroduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationSolid Carbide Performance Routers
Solid Carbide Routers Manufactured in Manufactured inthe theus US Distributed in Distributed inthe theuk UK Plastics crylic BS luminium PVC Nylon Polypropylene Polycarbonate Solid Carbide 1-Flute O-Flute
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationNUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
More informationNIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
More informationIron GEN III - Technical Notes
DART Iron GEN III - Technical Notes Deck Height... 9.240" Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 227lbs Largest Recommended Bore..... 4.185" Largest Recommended Crank
More informationIllston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationConversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
More informationProduct features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationLSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION
Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More informationDRILL CHUCKS AND ARBORS
DRILL CHUCKS AND ARBORS ABOUT US We are leading manufacturer of Geared Type Drill Chucks with s and Arbors since 1944 - manufacturing wide range of our products in various sizes. We manufacture them under
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationFor Yachts Innovative Gear Solutions in Naval Propulsion Systems
For Yachts Innovative Gear Solutions in Naval Propulsion Systems CODAD gear box Type BSL 2 x 130/140 during final assembly. Philosophy The basic factors for a long lasting success in the production of
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationUnison Corporation. DedTru Centerless Grinding Product Line
Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture
More informationPower TOOLS. Power Threading Machine / Model 535. Power Threading / Model Model 300 Compact Threading Machine
Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor.
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationHIRA SOLUTIONS HIRA SOLUTIONS COMPLETE ENGINEERING SOLUTIONS
HIRA SOLUTIONS HIRA SOLUTIONS COMPLETE ENGINEERING SOLUTIONS OFFICE : SR NO. 60/1, DALVI WASTI, AMBEGON (K), NEAR VIVA SAROVER, JAMBHULWADI ROAD, PUNE : 411046 E-MAIL: nanagaikwad@yahoo.com / i_gaikwad@yahoo.com
More informationUNISON CORPORATION. DedTru Centerless Grinding Product Line
Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture
More informationN I S T traceable calibration equipment conforms to MIL-STD-45662A.
www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. Turbine RTD's are used for bearing temperature measurement which provides safe and accurate monitoring. The RTD designs offer a resistance value
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More informationBall Screws Inch Series
Ball Screws Inch Series BALL SCREWS Table of Contents Description Page Product Overview................................ 38 Precision Rolled Ball Screws Inch Series......... 42 Visual Product Reference
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-03 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Our products are sold through distributors
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationProduct Information Guide
Product Information Guide Electrical Conduit Fittings Interior & Exterior Coatings Phone: 281-405-8240 Fax: 281-405-8388 Email: Sales@nec-inc.com www.nec-inc.com Service - Quality Nipples, Elbows and Couplings,
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More information