~ MHDG-CCP MHDG Impulse Enterprise, Inc. MINIATURE HIGH DENSITY SERIES STAINLESS STEEL .56 DELRIN WASHER 1.51
|
|
- Elisabeth Carson
- 6 years ago
- Views:
Transcription
1 MHDG.. DIA. MHDG-CCP NEOPRENE/ DELRIN WASHER.. MHDG-CCP-RA NAVAL BRONZE MHDG-CCP. 00-H MHDG-CCR ALIGNMENT KEY -0 (SEE DETAIL A) DIA MHDG-BCR.. HEX - /- UNF-A DETAIL A Technical Bulletin Impulse Enterprise, Inc. 000
2 MHDG.0 TYP CONTACT CONFIGURATION (BCR FACE VIEW). TYP # # # # X. DIA THRU # #0 # #0 #0 0 0# MHDG-FCR. DIA **. #0 # 0 0 MOUNTING INSTRUCTIONS #0 #0 # # x CHAMFER SEE CHART ***.0. DIA MOUNTING TORQUE FOR MHDG-BCR not to exceed 0 in/lbs PRESSURE RATING (psi) 0,000 MHDG-BCR/FCR/CCR MHDG-SCP MHDG-CCP MHDG-SCR NOTE: CCP is not terminated to cable unless specified. * Please specify number of contacts. ** Internal assembly same as MHDG-BCR (facing page). *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. **** Oil filled version available upon request Impulse Enterprise, Inc. Technical Bulletin
3 MHDL.. DIA DELRIN WASHER. MHDL-CCP.. MHDL-CCP-RA NAVAL BRONZE. MHDL-CCP 00-H. MHDL-CCR. ALIGNMENT KEY -0. DIA - (SEE DETAIL A) -0 UR- SPIROLOX... FLATS MHDL-BCR.00-0 /-0 UNEF-A DETAIL A Technical Bulletin Impulse Enterprise, Inc. 0
4 MHDL. TYP CONTACT CONFIGURATION (BCR FACE VIEW). TYP # # # X. DIA THRU 0 #0 0 #0 # MHDL-FCR**. DIA #0 # MOUNTING INSTRUCTIONS..0 x CHAMFER 0 0 # SEE CHART *** MOUNTING TORQUE FOR MHDL-BCR not to exceed 00 in/lbs PRESSURE RATING (psi).. DIA 0,000 MHDL-BCR/FCR/CCR MHDL-SCP MHDL-CCP MHDL-SCR NOTE: CCP is not terminated to cable unless specified. * Please specify number of contacts. ** Internal assembly same as MHDL-BCR (facing page). *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. **** Oil filled version available upon request Impulse Enterprise, Inc. Technical Bulletin
5 MHDM.0.00 DIA DELRIN WASHER. MHDM-CCP. NAVAL BRONZE.0.0. MHDM-CCP MHDM-CCP-RA. #00-00H. ALIGNMENT KEY MHDM-BCR -0 (SEE DETAIL A) -00 SPIROLOX UR UNEF-A DETAIL A Technical Bulletin Impulse Enterprise, Inc. 000
6 MHDM CONTACT CONFIGURATION (BCR FACE VIEW) 0 0 #0 MOUNTING INSTRUCTIONS.0.00 DIA.0 x CHAMFER..0-0 UNEF-B PRESSURE RATING (psi) 0,000 MOUNTING TORQUE FOR BCR not to exceed 00 in/lbs BCR MHDM-SCP CCP MHDM-SCR NOTE: CCP is not terminated to cable unless specified Impulse Enterprise, Inc. Technical Bulletin
7 MHDO****.... MHDO-CCP NAVAL BRONZE.0 MHDO-CCP-RA. MHDO-CCP 00-H. -0 DELRIN WASHER -0 (SEE DETAIL A) ALIGNMENT KEY. MHDO-CCR.. DIA #0.0 MHDO-BCR.0 FLATS SCALE : /- UN-A DETAIL A Technical Bulletin Impulse Enterprise, Inc. 000
8 MHDO****. TYP CONTACT CONFIGURATION (BCR FACE VIEW) OTHER PIN CONFIGURATIONS AVAILABLE UPON REQUEST. TYP X. DIA THRU #0 0#. MHDO-FCR ** DIA MOUNTING INSTRUCTIONS..0 x CHAMFER SEE CHART *** 0 0 #0 # 0.0. DIA #0 # MOUNTING TORQUE FOR MHDO-BCR not to exceed 00 in/lbs PRESSURE RATING (psi) 0,000 MHDO-BCR/FCR/CCR MHDO-SCP MHDO-CCP MHDO-SCR NOTE: CCP and CCR are not terminated to cable unless specified. * Please specify number of contacts. ** Internal assembly same as MHDO-BCR (facing page). *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. ****MHDO series redesigned. Old style available upon request. ***** Oil filled version available upon request Impulse Enterprise, Inc. Technical Bulletin
9 MHD SCP F E D G C SCR B H A I A B C D E CONNECTOR SIZE ENGAGING NUT DELRIN WASHER (X) F DIA G H DIA I PRESSURE RATING (psi) MHDG MHDL MHDM MHDO ,000 0,000 0,000 0,000 Technical Bulletin SCALE NONE Impulse Enterprise, Inc. 000
MSSJ/MSAJ Impulse Enterprise, Inc. METAL SHELL STAINLESS STEEL/ALUMINUM SERIES MSJ-CCP-OF** DIA .62.
MSSJ/MSAJ. MSJ-CCP-OF**... MSSJ-CCP...0. MSSJ-CCP O-RING -0 MSSJ-CCP-RA RETAINING RING 00-0H.. NICKEL- ALUMINUM- BRONZE/NYLON/ ALUMINUM GLASS REINFORCED EPOXY.. HEX MSSJ-CCR.0 O-RING -0 O-RING -0 O-RING
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationMODEL 1060 DC BRUSHLESS THRUSTER
DC BRUSHLESS THRUSTER 2.7kw thruster develops over 105lbf (48 kgf) forward thrust & over 65lbf (29.5kgf) reverse thrust. Powerful direct drive DC brushless motors for low noise in noise sensitive applications.
More informationList Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationService Parts Manual Axial Piston Pumps and Motors Series 18 powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Service Parts Manual Axial Piston Pumps and Motors Series 18 powersolutions.danfoss.com Front cover illustration: P100 649 2 BLN-2-41635 520L0664 Rev BA Feb 2014 Contents
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationUNP Series Pneumatic Power Clamp
Features Conforms to Standards Blade and foot mounting Fully adjustable opening angle Opening angle can be set with or without air pressure Unique linkage design ensures positional repeatability Linear
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationMODEL 1040 DC BRUSHLESS TUNNEL THRUSTER
DC BRUSHLESS TUNNEL THRUSTER 1.3kw thruster develops over 54lbf (22.5 kgf) thrust in both forward & reverse directions for optimal maneuvering. Powerful geared DC brushless motors for low noise in noise
More informationMODEL 1020 DC BRUSHLESS THRUSTER
DC BRUSHLESS THRUSTER 1.1kw thruster develops over 55lbf (23 kgf) forward & over 32lbf (14.5kgf) reverse thrust. Powerful geared DC brushless motors for low noise in noise sensitive applications. Magnetically
More informationUnderwater /Subsea Connectors and Cables. Deep Water Topside Downhole Shallow Water
Underwater /Subsea Connectors and Cables Deep Water Topside Downhole Shallow Water Glenair Marine / Subsea Connectors and Cables High pressure, harsh environment underwater / topside Subsea Deep Water
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationPOWER-STUD. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Stainless Steel Wedge Expansion Anchor
General Information Mechanical s GENERAL INFORMATION POWER-STUD Stainless Steel Wedge Expansion PRODUCT DESCRIPTION The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor.
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationMidwest Roadside Safety Facility
22860 900" D D 914 36" 1000 39 3/8" SOIL AND TARMAC CUT-OUT CONCRETE TARMAC BRIDGE DECK B PLAN VIEW C A C 15 20 [3/4"] Deck Gap BRIDGE DECK A 3900 153 1/ Impact 30V 45720 1800" 34290 13" 11430 4" RAIL
More informationModel 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationAeroquip 3200 Series Self-Sealing Quick Disconnect
Aeroquip 3200 Series Self-Sealing Quick Disconnect 3200 Series Quick Disconnect Eaton s Aeroquip Brand 3200 Series Self-Sealing Coupling is a reliable quick disconnect for 3000 psi (2068.42 kpa) aircraft
More informationO.E.M GAUGES. For Installation and Operation Manuals Please Visit: Mid-West Instrument
O.E.M GAUGES For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument Product Notes: BULLETIN NO. 126-127/11 (SUPERSEDES BULLETIN NO. 126-127/00) O.E.M
More informationMedium Duty Piston Pump Variable Displacement Closed Circuit
Medium Duty Piston Pump Variable Displacement Closed Circuit Model 70160 Model 70360 Model 72400 20.3 cm 3 /r [1.24 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 23.6 cm 3 /r [1.44 in
More informationSUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More informationNUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. Coaxial, low noise, orange, PVC jacket
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. J1 Coaxial, low noise, orange, PVC CABLES 55 to 80 67 to 176 0.088 cables & connectors J3 Coaxial, low noise, high temperature, red, Teflon 100
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More information8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationHP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT 60 PSI
ISO 9001 REGISTERED HP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT FORCE @ 60 PSI RETRACTING LOCATING PIN WITH A 2KG SLIDE HAMMER PISTON. RAP ACTION* PROVIDES CONCENTRATED PULLING POWER. A GREATER
More informationINSTALLATION MANUAL CBU TYPES I, II, III, AND IV
APPLICATION REVISION NEXT ASSY USED ON LTR DESCRIPTION DATE APPROVAL 1055270 -- RELEASED/EC8199-013 3/1/07 D. IRWIN 1055490 A SEE EC8966-225 8/3/07 D. IRWIN 1055491 1055492 INSTALLATION MANUAL CBU TYPES
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationSCHRADER INDUSTRIAL PRODUCTS CATALOG COUPLERS & PLUGS
SCHRADER INDUSTRIAL PRODUCTS CATALOG COUPLERS & PLUGS WARNING: Handling the brass parts of this product will expose you to lead, a chemical known to the State of California to cause birth defects and other
More informationPort Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationMODEL 400 DC BRUSHLESS ROTARY ACTUATAOR
DC BRUSHLESS ROTARY ACTUATAOR High torque rotary actuator for use in winches and other high load applications. 600w-2.5kw rotary actuator develops 400 ft-lb (540 Nm) of torque at 100% duty cycle. Continuous
More informationChlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
More informationP.O. Box 1388 West Sacramento, CA (916) Fax: (916)
P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 16 Installation Dimensions 30,000 in lbs Continuous Torque Output 5.2 to 1 Ratio 20,000 lb. Maximum Radial
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationProportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
More informationSix-Inch Submersible Pumps
FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationOrdering Guide LINTECH. PS Series - N inch & 20 mm screw diameters - PS075 & PS20M series.
Ordering Guide - 0.750 inch & 20 mm screw diameters - PS Series PS075 & PS20M series PS 075 020 - S1 - N1 - F1 - M02 - C165 - E00 - B00 - Lxxx.xxx Precision Screw Screw iameter 075-0.750 inch Screw Lead
More informationMODEL 260 DC BRUSHLESS THRUSTER
DC BRUSHLESS THRUSTER 350w thruster develops over 12lbf (5.4 kgf) forward thrust & over 4lbf (1.8kgf) reverse thrust in an extremely compact and lightweight package. Powerful direct drive DC brushless
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS METAL CUTTING SAW SERIAL NUMBER
22-64-0437 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CATALOG NO. METAL CUTTING SAW 6370-20 SERIAL NUMBER A35C BULLETIN NO. 54-40-1627 REVISED BULLETIN DATE 54-40-1626 Sept.
More informationMedium Duty Piston Pump Variable Displacement Piston Pump
Medium Duty Piston Pump Variable Displacement Piston Pump Model 70160 Model 70360 Model 72400 20,3 cm 3 /r [1.24 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 23,6 cm 3 /r [1.44 in 3
More informationBlank Size AEW BEW CEW DEW AA A B C D E AAL AL BL CL AE BE CE DE HA HB HC HD /4-20, 10-24, /4-20, 5/ /8-16 LA LB LC LD LE
Telephone: 800-8-784 Fax: 704-927-279 WING NUTS Effective 02/0/0 Product Blank s Wing Spread Overall Lbs/M Washer Base 232 300 232 400 232 500 232 600 AEW BEW CEW DEW /4-20,, 0-24, 0-32 /4-20, -6, 5/6-8
More informationSUBMERSIBLE PUMPS FLINT & WALLING SERIES STAINLESS STEEL C/W MOTOR 4" - 3 WIRE - SINGLE PHASE AND CONTROL BOX
SUBMERSIBLE PUMPS FLINT & WALLING SERIES STAINLESS STEEL Page 1 APRIL 1, 2016 C/W MOTOR 4" - 3 WIRE - SINGLE PHASE AND CONTROL BOX Part US No. Model HP Volts GPM Stages Price M8469690 4F05S05 1/2 115 5
More informationReproduction. Not for. Electric Pressure Washer. Illustrated Parts List. Model Mfg. No. Description ,800 PSI Briggs & Stratton
Illustrated Parts List Electric Pressure Washer Model Mfg. No. Description 020358-0 1,800 PSI Briggs & Stratton This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More information4200 & 6200 Owner s Manual & Parts Book
00 & 00 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date --0 Description Page To The Owner & Maintenance Safety Precautions & Torque Specifications Skid
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
More informationSolutions. We Manufacture. i Hydraulics. Eaton. Variable Displacement Piston Pump. Manual Controlled
Eaton s y c h Variable Displacement Piston Pump i Hydraulics d r Manual Controlled l a Model 70160 20, cm/r [1.24 in/r] 2,6 cm/r [1.44 in/r] u u l Model 7060 40,6 cm/r [2.48 in/r] 49,2 cm/r [.00 in/r]
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Variable Displacement Piston Pump.
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s Variable Displacement Piston Pump Manual Controlled Servo Controlled We Manufacture Model 70160 20, cm /r [1.24 in /r] 2,6 cm /r [1.44 in /r] Model
More informationGROUND BLOCK RETRACT CYLINDERS
ISO 9001 REGISTERED GROUND BLOCK RETRACT CYLINDERS FOR ALL MIG & ARC WELDING APPLICATIONS IN FIXTURES, TRUNIONS, AND DIAL TABLES. INSULATED GROUND BLOCK CYLINDERS ARE IDEAL FOR SINGLE-POINT WELDING. SOLID
More informationFLEXIBLE SHAFT COUPLINGS
FLEXIBLE JAW - SPIDER PERFORMANCE DATA Four types of elastomer designs and materials are offered to allow for flexibility in addressing specific application requirements. Standard Materials: SOX (NBR)
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Not for Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing
More informationRESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
More informationSELF-CLINCHING STUDS AND PINS
SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
More informationCVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES
More informationEB and ER Construction
EB and ER Construction EB Element EB elements are suited to slow speed applications having moderate starting and stopping loads. They are used as slip clutches and tension brakes for lighter torque and
More informationProportional Valves. Auxiliary Function Modules for Proportional Valves. Hydrostat, Parallel-Flow-Path, Pilot Shuttle and Tapping Modules
June 1996 G-459 VICKERS roportional Valves uxiliary Function Modules for roportional Valves Hydrostat, arallel-flow-ath, ilot Shuttle and Tapping Modules Functional Symbols For typical applications of
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationHelicoil Thread Repair Kits 1. Re-Nu Thread Repair Inserts 5
ONTENT PGE INSERTS [IN] IN 1 Helicoil Kits 1 Re-Nu 5 IN 8 HELIOIL THRED REPIR KITS METRI E Insert (Fitted) Unit : mm Size Drill Size M2 x 0.4 2.1 M2.2 x 0.45 2.30 M2.5 x 0.45 2.60 M3 x 0.5 3.10 M3.5 x
More informationRT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168
RT/RTE Series LIT NO: DATE: November 2004 REVISION: A RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 RT/RTE -340/343/400/403/460/463 PARTS LIST 2 RT/RTE -340/343/400/403/460/463
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More information9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models
Model Codes P *** -(F)-(M) * *(F)(X) (*)-** -**-(C)-(G)-(L)- ** -**** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 F V asic models = Fixed displacement type = Variable displacement type 2 Displacement PF and
More informationPSI Series Features: Trouble-free design for long life. Simple mechanical actuation
CROSSOVER DRIVES Wrap Spring Clutches Ideal for Overrunning, Start- Stop, and Single Revolution Applications The Crossover Drives clutches are the basic form of wrap spring clutch design. For start-stop
More informationdrill point and thru spindle coolant systems positive mechanical depth stop
SPACEMATIC SPACEMATIC ULTRALITE ULTRALITE Model 1000II Model 2000 TM TM DRILLING MACHINES Standard Features Optional Features ergonomic design air pressure intensifier for increased thrust consistent clamp
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationGPL 5 NEW STYLE Stroke: in. (12.7 mm) Stroke limit options available Gripping Force Per Jaw 100PSI (6.8bar): 12.0 lbs. (5.44 kgf) Grip
New GPL Grippers Twice the Force Half the Weight The New GPL Series of parallel grippers represents a pinnacle in parallel gripper development. This GPL has not changed catalog dimensions but provides
More informationCover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)
DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque
More information453X Series. Application. Features. Two-Position Damper Actuator General Instructions
453X Series Two-Position Damper Actuator General Instructions Application The 453L, light duty damper actuators are designed for a variety of two-position, spring return, damper applications. The 453L
More informationIndustrial Threaded Products Inc. An authority on threaded products since 1979
R Industrial Threaded Products Inc. An authority on threaded products since 1979 Knowledge, integrity, and a dedication to service guide our business. At ITP, we stand by these principles as we have for
More information450 & Slant Top Owner s Manual & Parts Book
0 & 0 - Slant Top Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date -- Contents Description Page To The Owner & Maintenance Safety Precautions & Torque
More informationLINEAR ACTUATOR. MODULAR ACTUATORS 100 to 2000 lbs (444 to 8896 N) OPTIONS WARNING
100 to 2000 lbs (444 to 8896 N) Integral housing flange engineered for NEMA 56 frame motor. -face mounting. (NEMA 42 and 48 and IE71 frame motor -face mounting options available). Rated loads to 2,000
More information1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco
Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: The 1500K Series Pump/Motor utilizes the many design and application features of the widely accepted HYDRECO Series modern
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More information[15.2] .5 [12.7] 1/8-27NPTF (AIR CONNECTION) 2.66 [67.6] 1.62 [41.1] PART NUMBER
LABEL PART PER SPEC A-34473 1-16 96.6 [15.2] 4X.56 ±.045 [14.2 ±1.14] NOTE: DIMENSIONS IN [MM] ARE IN MILLIMETRES ALL DIMENSIONS ARE FOR REFERENCE ONLY (4) GROOVES ACCEPT SAE 1/2" BELTS M10 X 1.5-6H THRU
More informationPOWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
More informationScrewdrivers. Choosing the right Screwdriver. Tool selection
RediPower Choosing the right Screwdriver Tool selection Type of fastener/component Joint integrity Torque required Tool orientation and ergonomics Productivity POSSIBLE USE OF SCREWS TYPE OF CLUTCH START
More informationBV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
More informationWDV-2 2-way normally closed poppet with air pilot. When valve closes a spring biased internal piston draws back a small volume on outlet side (approx.
PV-1 MPS-2P SPECIALTY COMPONENTS Miniature pulse valve, a normally open 3-way valve that closes shortly after being pressurized and remains closed until supply pressure is exhausted and repressurized.
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Hydrostatic Transaxles. h y d r a u l i c s. Models 778 Right Angle Transaxle
H y d r a u l i c s ydraulics Eaton Hydrostatic Transaxles h y d r a u l i c s Models 778 Right Angle Transaxle We Manufacture No. 11-701 August 1998 Solutions S o l u t i o n s Model 778 Eaton Hydrostatic
More informationITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps
B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for
More informationI. Product Selection Guide Specifications H-46 H-22 H-506 CT-23 CT-26 H-490. Turns
Turns-Counting Dials w w w. b o u r n s. c o m I. Product Selection Guide...131 II. Dials 46, 0-20 Turn Dials...132 22, 0-15 Turn Dials...133, 134 27, 0-10 Turn Dials...135 28, 0-10 Turn Dials...135 25.4,
More information