MSSJ/MSAJ Impulse Enterprise, Inc. METAL SHELL STAINLESS STEEL/ALUMINUM SERIES MSJ-CCP-OF** DIA .62.
|
|
- Lydia Myra Hunt
- 5 years ago
- Views:
Transcription
1 MSSJ/MSAJ. MSJ-CCP-OF**... MSSJ-CCP...0. MSSJ-CCP O-RING -0 MSSJ-CCP-RA RETAINING RING 00-0H.. NICKEL- ALUMINUM- BRONZE/NYLON/ ALUMINUM GLASS REINFORCED EPOXY.. HEX MSSJ-CCR.0 O-RING -0 O-RING -0 O-RING -0. MSSJ-BCR..0 O-RING - /- UNF-A Technical Bulletin 0 rev 000
2 MSSJ/MSAJ CONTACT CONFIGURATION (BCR FACE VIEWS). # # # # # # X " TEFLON LEADS **** MSSJ-FCR***.00 O-RING - # #0 0 0#0 # #0 0 #0 # NOTE: Not available in OF. # #0 #0 # 0 MOUNTING TORQUE FOR MSSJ, MSAJ-BCR MSSJ-BCR/FCR/CCR MSAJ-BCR/CCR not to exceed 00 in/lbs MSSJ-*-SCP MSAJ-*-SCP NOTE: CCP is not terminated to cable unless specified. Nylon engaging nut used with aluminum body. * Please specify number of contacts. ** Extended backshell for Oil Filled assemblies. *** Internal assembly same as MSSJ/MSAJ-BCR (facing page). **** Solder cup version available. PRESSURE RATING (psi) MSSJ-CCP, MSAJ-CCP 0,000 MSJ-SCR (Epoxy) rev 0 Technical Bulletin
3 MSSG/MSAG.0. MSSG-CCP-RA** MSSG-CCR*. MSSG-CCP** CCP BODY GLASS REINFORCED EPOXY.0.. RETAINING RING 00-H NAVAL BRONZE..0 MSSG-BCR*. FLATS MOUNTING INSTRUCTIONS....0 x. /- UNF-A.0.0. /- UNF-B Technical Bulletin 0 rev 000
4 MSSG/MSAG CONTACT CONFIGURATION (BCR FACE VIEWS). # # X.0. # #.0 MSSG-FCR* #....0 x # MOUNTING INSTRUCTIONS SEE CHART *** MOUNTING TORQUE FOR MSSG, MSAG-BCR MSSG-BCR/FCR/CCR MSAG-BCR/FCR/CCR not to exceed 00 in/lbs MSSG-SCP MSAG-SCP PRESSURE RATING (psi) 0,000 MSSG-CCP MSAG-CCP NOTE: Delrin protective caps available upon request. * See Technical Bulletin for internal assembly and hardware specifications. ** See Technical Bulletin for internal assembly and hardware specifications. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. MSSG-SCR MSAG-SCR rev 000 Technical Bulletin
5 MSSK/MSAK.. MSSK-CCP** MSSK-CCP-RA**.0.0 NAVAL BRONZE MSSK-CCR* MSSK-BCR*. FLATS MOUNTING INSTRUCTIONS x.0 - UNS-A - UNS-B Technical Bulletin 0 rev 000
6 MSSK/MSAK X.0. CONTACT CONFIGURATION (BCR FACE VIEWS) # # # # MSSK-FCR..00 *. 0 # # #0 #0 #0 0.0 x.0.0 MOUNTING INSTRUCTIONS SEE CHART *** 0 0# IE NOTE: Please specify Navy or IE pin configuration when ordering. 0# NAVY 0 MOUNTING TORQUE FOR MSSK, MSAK-BCR MSSK-BCR/FCR/CCR MSAK-BCR/FCR/CCR not to exceed 00 in/lbs MSSK-SCP MSAK-SCP PRESSURE RATING (psi) MSSK-CCP MSAK-CCP NOTE: Delrin protective caps available upon request. * See Technical Bulletin for internal assembly and hardware specifications. ** See Technical Bulletin for internal assembly and hardware specifications. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. rev 000 0,000 MSSK-SCR MSAK-SCR Technical Bulletin
7 MSSL/MSAL.. MSSL-CCP-RA**. MSSL-CCP** NAVAL BRONZE MSSL-CCR* MSSL-BCR*. FLATS SCALE : MOUNTING INSTRUCTIONS x.0 /- UNF-A /- UNF-B Technical Bulletin 0 rev 000
8 rev 000 Technical Bulletin MSSL/MSAL.00 X MSSL-FCR* MOUNTING INSTRUCTIONS.0 x SEE CHART ***.0 MOUNTING TORQUE FOR MSSL, MSAL-BCR MSSL-BCR/FCR/CCR MSAL-BCR/FCR/CCR not to exceed 00 in/lbs MSSL-SCP MSAL-SCP PRESSURE RATING (psi) MSSL-CCP MSAL-CCP NOTE: Delrin protective caps available upon request. * See Technical Bulletin for internal assembly and hardware specifications. ** See Technical Bulletin for internal assembly and hardware specifications. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. 0,000 MSSL-SCR MSAL-SCR
9 MSSL/MSAL CONTACT CONFIGURATION (BCR FACE VIEWS) #/0 # # # * 0 #0 # # # # # # #0 #0 # # # 0 0 # 0 0 # #0 0 0 #0 * Available in high voltage # # #0 Technical Bulletin rev 000
10 MSSM/MSAM. MSSM-CCR* 0.00 MSSM-CCP-RA** MSSM-CCP** NAVAL BRONZE... MSSM-BCR*. FLATS.0 MOUNTING INSTRUCTIONS x. /- UN-A.0.0 /- UN-B Technical Bulletin 0 rev 000
11 MSSM/MSAM. X... MSSM-FCR* MOUNTING INSTRUCTIONS x SEE CHART ***.0 ±.00 MOUNTING TORQUE FOR MSSM, MSAM-BCR MSSM-BCR/FCR/CCR MSAM-BCR/FCR/CCR not to exceed 00 in/lbs MSSM-SCP MSAM-SCP PRESSURE RATING (psi) MSSM-CCP MSAM-CCP NOTE: Delrin protective caps available upon request. * See Technical Bulletin for internal assembly and hardware specifications. ** See Technical Bulletin for internal assembly and hardware specifications. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. 0,000 MSSM-SCR MSAM-SCR rev 000 Technical Bulletin
12 MSSM/MSAM CONTACT CONFIGURATION (BCR FACE VIEWS) # * # * # 0 # 0 #0 # 0 0 0# # # # # #0 * Available in high voltage. Technical Bulletin rev 0
13 MSSO/MSAO MSSO-CCR* MSSO-CCP** NAVAL BRONZE MSSO-BCR*. FLATS MOUNTING INSTRUCTIONS x /- UN-A /- UN-B Technical Bulletin rev 000
14 MSSO/MSAO CONTACT CONFIGURATION (BCR FACE VIEWS).0 X.0 #... MSSO-FCR *. MOUNTING INSTRUCTIONS # x SEE CHART ***.0 ±.00 MOUNTING TORQUE FOR MSSO, MSAO-BCR MSSO-BCR/FCR/CCR MSAO-BCR/FCR/CCR not to exceed 00 in/lbs MSSO-SCP MSAO-SCP PRESSURE RATING (psi) MSSO-CCP MSAO-CCP ** See Technical Bulletin for internal assembly and hardware specifications. * See Technical Bulletin for internal assembly and hardware specifications. NOTE: Delrin protective caps available upon request. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. 0,000 MSSO-SCR MSAO-SCR rev 000 Technical Bulletin
15 MSSQ/MSAQ MSSQ-CCR*. MSSQ-CCP**.0. NAVAL BRONZE..0. MSSQ-BCR*. FLATS MOUNTING INSTRUCTIONS....0 x. /- UN-A.0.0. /- UN-B Technical Bulletin 0 rev 000
16 MSSQ/MSAQ. X.0.. MSSQ-FCR *. MOUNTING INSTRUCTIONS x SEE CHART ***. ±.00 MOUNTING TORQUE FOR MSSQ, MSAQ-BCR MSSQ-BCR/FCR/CCR MSAQ-BCR/FCR/CCR not to exceed 00 in/lbs MSSQ-SCP MSAQ-SCP PRESSURE RATING (psi) MSSQ-CCP MSAQ-CCP NOTE: Delrin protective caps available upon request. * See Technical Bulletin for internal assembly and hardware specifications. ** See Technical Bulletin for internal assembly and hardware specifications. *** Blind tapped hole not to penetrate bulkhead, minimum full thread depth times bolt diameter. 0,000 MSSQ-SCR MSAQ-SCR rev 000 Technical Bulletin
17 MSSQ/MSAQ CONTACT CONFIGURATION (BCR FACE VIEWS) # (High Voltage) # # (High Voltage) #0 # 0# # Technical Bulletin rev 0
18 ASSEMBLY BCR/FCR/CCR DETAILED ASSEMBLY J I H G F E GLASS REINFORCED EPOXY INSERT D C OPTIONAL B A SHELL SIZE A BULKHEAD NUT * 000 S S 0 B BULKHEAD WASHER * 00 S S 0 C O-RING ** -0-0 D O-RING ** -0-0 E O-RING -0 - F O-RING NONE -0 G INTERNAL WASHER NONE 000 S H SPIROLOX RING UR- UR-0 I O-RING -0-0 J O-RING NOTE: See Technical Bulletin 0 for J size detailed assembly. * Not required with FCR or CCR assemblies. ** Not required with CCR assembly. *** FCR uses -0. SCALE NONE G K L M O Q 000 S 0 00 S S UR S 0 00 S S UR S 0 00 S S UR S 0 00 S *** S UR Technical Bulletin rev 0
19 ASSEMBLY CCP DETAILED ASSEMBLY E D GLASS REINFORCED EPOXY INSERT A B C ASSEMBLY DETAIL SEE ASSEMBLY DETAIL SCALE NONE SHELL SIZE G K L M O Q A O-RING NONE B WASHER NONE 000 S 000 S 000 S 000 S 000 S C SPIROLOX RING NONE UR- UR- UR- UR- UR- D DELRIN WASHER (X) NONE 000 P 000 P 000 P 000 P 000 P E RETAINING RING NOTE: See Technical Bulletin 0 for J size detailed assembly. rev 0 Technical Bulletin
20 MS SCP E D SCR C B A CONNECTOR SIZE MSK MSL MSM MSO MSQ A B C D E O-RING O-RING ENGAGING NUT DELRIN WASHER (X) RETAINING RING F G H I PRESSURE RATING (psi) P P P P ,000 0,000 0,000 0,000 SCALE NONE P ,000 Technical Bulletin rev 000
~ MHDG-CCP MHDG Impulse Enterprise, Inc. MINIATURE HIGH DENSITY SERIES STAINLESS STEEL .56 DELRIN WASHER 1.51
MHDG.. DIA. MHDG-CCP NEOPRENE/ DELRIN WASHER.. MHDG-CCP-RA NAVAL BRONZE MHDG-CCP. 00-H MHDG-CCR ALIGNMENT KEY -0 (SEE DETAIL A)....00 DIA -0.0-0 MHDG-BCR.. HEX - /- UNF-A DETAIL A Technical Bulletin 0-00--0
More informationCONTENTS PAGE PAGE SECTION
CONTENTS PAGE SECTION PAGE di^pp obfkclo`babmluvedobfseries Introduction... GRE 2 Availability... GRE 2 Applications... GRE 2 Special Assemblies... GRE 2 Part Number System... GRE 2 General Information...
More informationPART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
More informationUnderwater /Subsea Connectors and Cables. Deep Water Topside Downhole Shallow Water
Underwater /Subsea Connectors and Cables Deep Water Topside Downhole Shallow Water Glenair Marine / Subsea Connectors and Cables High pressure, harsh environment underwater / topside Subsea Deep Water
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationV46 Series Pressure-Actuated Water-Regulating Valves
FANs 1, 11 Product/Technical Bulletin V46 Issue Date 9 V46 Series Pressure-Actuated Water-Regulating Valves The V46 pressure-actuated modulating valves come in two types of control action: direct acting
More informationAeroquip 3200 Series Self-Sealing Quick Disconnect
Aeroquip 3200 Series Self-Sealing Quick Disconnect 3200 Series Quick Disconnect Eaton s Aeroquip Brand 3200 Series Self-Sealing Coupling is a reliable quick disconnect for 3000 psi (2068.42 kpa) aircraft
More informationChlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
More informationReproduction. Not for. Electric Pressure Washer. Illustrated Parts List. Model Mfg. No. Description ,800 PSI Briggs & Stratton
Illustrated Parts List Electric Pressure Washer Model Mfg. No. Description 020358-0 1,800 PSI Briggs & Stratton This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More informationCover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)
DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationInstallation Guide. Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) Section 1.0: Mounting the M-Series Arm Parts Reference...
Installation Guide Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) The purpose of this guide is to describe installation of the MP90 M-Series Wall Mount Kit. Table of Contents Section 1.0: Mounting
More informationModel F1 Res Sprinklers engineered for the lowest flows to meet the minimum design density of.05 gpm/ft 2
Bulletin 15 Rev. M Bulletin 15 Rev. M Model F1 Residential s for Design Density of.05 gpm/ft 2 Model F1 Res s engineered for the lowest flows to meet the minimum design density of.05 gpm/ft 2 Types: 1.
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Not for Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationAF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
More informationMARINE HIGH PRESSURE CARBON DIOXIDE SYSTEMS Component Sheet Library
MARINE HIGH PRESSURE CARBON DIOXIDE SYSTEMS Component Sheet Library One Stanton Street / Marinette, WI 54143-2542, USA / +1-715-735-7411 / www.ansul.com Copyright 2015Tyco Fire Products LP. / All rights
More informationSeries IPT (26482 Type) Bayonet Coupler
IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit
More informationThis valve is designed to modulate flow of water or glycol to a water cooled condenser on a refrigeration system. ice machines. Pressure Element Style
Code No. LIT-1973 Issued July 1, 6 V46 Series Pressure Actuated Water Regulating Valve Description The V46 is a pressure actuated, modulating valve that is suitable for use either on closed or open systems.
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationSherwood Valve LLC EVERY COUNTRY EVERY CUSTOMER EVERY CODE. GVSERIES Industrial and Chrome Plated Precision Valves
Sherwood Valve LLC EVERY COUNTRY EVERY CUSTOMER EVERY CODE GVSERIES Industrial and Chrome Plated Precision Valves SHERWOOD GLOBAL VALVE FEATURES Durable forged brass body, precisely machined internal components
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationOPERATOR ADAPTER ABF
OPERATOR ADAPTER ABF Installation Instructions for Allen-Bradley Bulletin 1494F Series B Disconnect Switches (For parts list, see Page 2) Rev. B 2018 Hoffman Enclosures Inc. PH 7634222211 nvent.com/hoffman
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationMODEL 1060 DC BRUSHLESS THRUSTER
DC BRUSHLESS THRUSTER 2.7kw thruster develops over 105lbf (48 kgf) forward thrust & over 65lbf (29.5kgf) reverse thrust. Powerful direct drive DC brushless motors for low noise in noise sensitive applications.
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationHT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
More informationaero2 Pneumatic Actuator
The pneumatic rack & pinion actuator is manufactured using the latest materials and methods to provide dependable and smooth operation in demanding process control conditions. aero2 DESIGN FEATURES Hard
More informationNTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
More informationmirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6)
Page 1 of 7 1. DESCRIPTION Viking Mirage Standard and Quick Response Concealed Pendent VK462 and HP VK463 are thermosensitive glass-bulb spray sprinklers designed for installation on concealed pipe systems
More informationBig Block Chevrolet Driver Side Compressor Bracket Kit Long Pump with & without Power Steering ( BCA)
an ISO 900:205 Registered Company Big Block Chevrolet Driver Side Compressor Kit Long Pump with & without Power Steering (5370-BCA) 8865 Goll St. San Antonio, TX 78266 Phone: 800-862-6658 Sales: sales@vintageair.com
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More information06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
More informationPneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationRJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
More informationHydro Bond Engineering Ltd Surface Mateable Hybrid Coaxial Connectors: Coaxial & Electrical : Metal Keyed / HDM / HYB
Hydro Bond Engineering Ltd Surface Mateable Hybrid Coaxial Connectors: / HDM / HYB sales@hydrogroup.uk www.hydrogroupcom tel: +44 (0)1224 822996 fax: +44 (0)1224 825142. sales@hydrogroup.uk www.hydrogroup-asia.com
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More informationATTACHMENT ILLUSTRATED PARTS LIST
ATTACHMENT ILLUSTRATED PARTS LIST ATTACHMENT Mfg. No. Description 1693242 40 Two-Stage Snowthrower MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com
More information60-90 EXTRA 260/300 DLE 20 INSTALLATION GUIDE
60-90 EXTRA 260/300 DLE 20 INSTALLATION GUIDE This engine installation addendum will outline the installation of the new DLE 20cc in the 60-90 Extra 260 and Extra 300. The Extra 300 is shown however the
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and
More informationSERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS GMT 560 (4500/5500) CREW CAB (2351A000) Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 The CABMATE MODEL 2351A000 fits the 2003 and later GM 4500 / 5500 crew
More information92021 Automatic Tank Gauge. Features. Automatic Tank Gauge. 1/16 Accuracy. 90 Foot gauging range. Simple installation. Ground or roof reading
92021 The Shand & Jurs 92021 Automatic Tank Level Gauge is a float actuated tape driven gauge and by means of a digital counter indicates float travel accurately to 1/16 inch. The 92021 meets all the specifications
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationEstablished Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationMfg. No: ProMax 3500A UK
Parts Manual Mfg. No: 030396-0 ProMax 3500A UK Copyright Briggs and Stratton. All Rights reserved 21-Aug-2017 Model Components Table Of Contents Page Alternator (030395_030396_030397)....................................................................
More informationInnovation First, Inc. EDU Mechanical Guide
11.8.2002 www.innovationfirst.com Page 2 Table of Contents 1. Identifying Mechanical Parts...2 2. Identifying Motion Parts...3 3. Identifying Hardware Parts...4 4. Cutting and Bending Metal Parts...5 5.
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationARIZ Model Aircrafters
ARIZ NA Model Aircrafters www.arizonamodels.com Biplane Rigging and Assembly Hardware Notes PART AZM 600-020 PULLEY CONFIGURATIONS ALL STYLES ( Assemble as required Not all versions may be included in
More informationIllustrated Parts List Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
More informationWATER GAUGES AND LIQUID LEVEL GAUGES
Available Water Gauges 20-100 Series Standard Pattern 20-150 Standard Pattern Automatic 20-200 Series Heavy Pattern 20-250 Heavy Pattern Automatic 20-300 Series 20-350 Series Automatic 20-410 Series Left
More informationElectronic Ball Valve Guide Specifications
Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &
More informationIllustrated Parts List Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
More information2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves
More informationFISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationA SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications
A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
More informationMfg. No: ProMax 3500 Continental
Parts Manual Mfg. No: 030280-0 ProMax 3500 Continental Copyright Briggs and Stratton. All Rights reserved 18-Aug-2017 Model Components Table Of Contents Page Alternator & Outlet Panel..............................................................................
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationINDUSTRIAL DYNAMICS CO
TS-150 Rev. B MP Oscillating Piston Flowmeter: 12.7 mm (1/2" Type MP) 25.4 mm (1" Type MP) 50.8 mm (2" Type MP) 76.2 mm (3" Type MP) TYPE MP OSCILLATING PISTON FLOWMETER 2 " Type MP with 800 Series Register,
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationKOMBAT K1 Pneumatic Control Valve
Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers
More informationIllustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
More informationBV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
More informationIllustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
More informationAdjustable Bayonet Thermocouple
Adjustable Bayonet Thermocouple 3 16 Diameter is standard 1 2 Probe Length is standard Lead Length Termination Easily obtaining a desired probe depth, the adjustable bayonet sensor uses a tension spring
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationChlorine Gas Valves Robust Valve
Robust Valve Robust Valve The Sherwood Exclusive Robust Valve features a heavy-duty body and packing nut for increased load carrying capacity and resistance against stress corrosion and cracking. Key Features
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationWD-200 Series. Model WD-220 Flange Opposite Motor. Model WD-210 Flange on Motor Side. Model WD-200 No Flange. Motorized Backdraft Damper.
Application The WD200 series are electrically motorized backdraft dampers that open when energized and spring return close when deenergized. The WD200 series are for horizontal or vertical mounting. Primary
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationFF-N-836D April 24, 1972 SUPERSEDING (See section 6) FEDERAL SPECIFICATION
April 24, 1972 SUPERSEDING (See section 6) FEDERAL SPECIFICATION NUT: SQUARE, HEXAGON, CAP, SLOTTED, CASTLE, KNURLED, WELDING AND SINGLE BALL SEAT This specification was approved by the Commissioner, Federal
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationAeroquip Low Profile Self Sealing Couplings. Series 2000 Series 2001
Aeroquip Low Profile Self Sealing Couplings Series 2000 Series 2001 Low Profile Self Sealing Couplings 2000 and 2001 Opposed Poppet Series 2000 Series Couplings Qualified to Type I, Class A and Type II,
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationScrewdrivers. Choosing the right Screwdriver. Tool selection
RediPower Choosing the right Screwdriver Tool selection Type of fastener/component Joint integrity Torque required Tool orientation and ergonomics Productivity POSSIBLE USE OF SCREWS TYPE OF CLUTCH START
More informationIllustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More information