8D Series D38999 Stainless Steel Series

Transcription

1 Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts L: Receptacle with long PC tail (male and female size #22D, #20) C: Receptacle with short PC tail (male and female #22D, #20, #16, #12) S: Receptacle with specific PC tail (male et female #22D) W: Receptacle with male contacts #22D for wire wrap (3 wraps) T: Receptacle with male contacts #20 for wire wrap (2 wraps) P: Receptacle with solder cup contacts - see page 69, please consult us Shell size: 09, 11, 13, 15, 17, 19, 21, 23, 25 Plating: K: Passivated S: Nickel (locking type V, please consult us) Contact layout: See pages 13 to 19 P: Pin : Connector supplied less pin contact or with specific contacts (connector marking: + orientation) S: Socket B: Connector supplied less socket contact or with specific contacts (connector marking: B + orientation) Orientation: N,, B, C, D, E, T, V (see page 75) Specification: 046: Tinned straight PC tail 251: Connector provided with power contacts (layouts with contact #8) 022: Fuel tank 600: 230V qualified connector (T or V orientation mandatory - Consult us for available layouts) Special custom: None: Standard plastic cap M: ntistatic plastic cap L: For P or S contact type only, connectors delivered without contacts, connectors marking P or S plus orientation. Note: PC tail contacts without shoulder also available. Please see page 102. BCC part numbers Basic Series: BCC63DB: 8D5*K (stainless steel plug) BCC63DC: 8D0*K (stainless steel square flange receptacle) BCC63DB P N H Shell size: 09=, 11=B, 13=C, 15=D, 17=E, 19=F, 21=G, 23=H, 25=J - : Separator (mandatory) Contact layout: See page 18 for layout according to BCC P: Pin S: Socket Orientation: N,, B, C, D, E (see page 75) Specification: None: With contacts H: Without contact & without filler plug 41

2 MIL-DTL part numbers Basic Series D38999/ 20 K B 35 P N L Shell style: 20: Square flange receptacle 24: Jam nut receptacle 26: Plug with RFI shielding Plating: K: Passivated S: Nickel Shell size: 09=, 11=B, 13=C, 15=D, 17=E, 19=F, 21=G, 23=H, 25=J Contact layout: See page 18 for layout according to MIL-DTL P: Pin : Connector supplied less pin contact or with specific contacts (connector marking: + orientation) S: Socket B: Connector supplied less socket contact or with specific contacts (connector marking: B + orientation) Orientation: N,, B, C, D, E (see page 75) L: For P or S contact type only, connector delivered without contacts, connector marking P or S (without L) Note: To place an order of MIL connectors delivered without MIL removable crimp contacts and keep P or S plus orientation marking, it must be specify clearly on the order (by adding a suffix L at the end of the P/N or specified in comment). Delivered with MIL contacts mandatory. EN3645 part numbers Basic Series EN3645 K 6 G N 35 B N Plating: K: Stainless steel passivated Shell style: 0: Square flange receptacle 6: Plug 7: Jam nut receptacle Shell size: 09=, 11=B, 13=C, 15=D, 17=E, 19=F, 21=G, 23=H, 25=J Grounding: N: Standard insert not grounded Contact layout: See page 18 for layout according to EN3645 : Connector supplied less pin contact B: Connector supplied less socket contact F: Socket M: Pin Orientation: N,, B, C, D, E (see page 75) 42

3 Dimensions Receptacle type 0 (8D) or type 20 (D38999) B Shell size Max B Max C Max D Thread E ±0.3 F G H ±0.2 J ± () M12 x 1-6g C E F G D 11 (B) M15 x 1-6g (C) M18 x 1-6g (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g (G) 11.8 M31 x 1-6g J H 23 (H) M34 x 1-6g (J) M37 x 1-6g Receptacle type 7 (8D) or type 24 (D38999) C B Shell size ±0.15 B Max C Max D Thread E Max F ±0.4 ØG Max 09 () M12 x 1-6g (B) M15 x 1-6g (C) M18 x 1-6g Max D 15 (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g ØG 21 (G) M31 x 1-6g (H) M34 x 1-6g (J) M37 x 1-6g E F Recommended coupling torque on panel for jam nut receptacle (type 7) Shell 09 () 11 (B) 13 (C) 15 (D) 17 (E) 19 (F) 21 (G) 23 (H) 25 (J) Coupling torque (±0.5 N.m) Note: ll dimensions are in millimeters (mm) 43

4 Plug type 5 (8D & 8DV) or type 26 (D38999) 8D type 5 & D38999 type 26 ØB Thread 8DV type 5 - reinforced locking ØB Shell size Max Thread ØB Max 09 () M12 x 1-6g (B) M15 x 1-6g (C) M18 x 1-6g (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g (G) M31 x 1-6g (H) M34 x 1-6g (J) M37 x 1-6g Thread Mated connectors dimensions Type 0 with plug B Type 7 with plug C D Shell size Max B Max C Max D Max 09 () 11 (B) 13 (C) (D) 17 (E) 19 (F) 21 (G) (H) 25 (J) Note: ll dimensions are in millimeters (mm) 44

5 Receptacle with straight PC tail contacts L1 L2 L3 L2 Ø Ø L1 L3 Shell size Contact size Contact 09 () 11 (B) 13 (C) 15 (C) 17 (E) 19 (F) 21 (G) 23 (H) 25 (J) PC tail type type #22D M & F L & C 0.70 #22D M & F S 0.50 #20 M & F C 0.70 #16 M & F C 1.12 ±0.03 Min #22D M L & C Max #22D M L & C Min #22D F L & C Max #22D F L & C Min #22D M S Max #22D M S Min #22D F S Max #22D F S Min #20 M C Max #20 M C Min #20 F C Max #20 F C Min #16 M C Max #16 M C Min #16 F C Max #16 F C #22D M & F L 8.50 #22D M & F C 4.00 L2 #22D M & F S 5.10 #20 M & F C 5.10 #16 M & F C 5 ±0.1 Min #22D M L & C Max #22D M L & C Min #22D F L & C Max #22D F L & C Min #22D M S Max #22D M S Min #22D F S Max #22D F S Min #20 M C Max #20 M C Min #20 F C Max #20 F C Min #16 M C Max #16 M C Min #16 F C Max #16 F C M: Male contact F: Female contact L: Long PC tail C: Short PC tail S: Specific PC tail Note: ll dimensions are in millimeters (mm) 45

6 Connectors weight - in gram (±15%) With contacts Without contacts Shell size Plug 8D (type 5) Plug 8DV (type 5) Recep. (type 0) Recep. (type 7) Plug 8D (type 5) Plug 8DV (type 5) Recep. (type 0) Recep. (type 7) & Layout Male Female Male Female Male Female Male Female Male Female Male Female Male Female Male Female