Contact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
|
|
- Sarah Berry
- 5 years ago
- Views:
Transcription
1 8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL eries II Intermateable and interchangeable with MIL eries I and II nvironmental stainless steel version on request RI shielding plug old plating crimp contacts #, #, # Minicoax contacts # Hermetic version available haracteristics Mechanical ndurance : plug type : 5 operations plug type 36 : 25 operations hock : as per N 934 H 32 Vibrations : from to Hz acceleration : ontact retention in insert : : 9 N : 115 N : 136 N lectrical current rating per contact : environmental class hermetic class 7, Ordering information sealed connectors aluminum version type square flange receptacle 17 jam nut receptacle plug 36 RI shielded plug plating R black anodized (non conductive plating) N nickel (conductive plating) yellow cadmium (conductive plating) contact layout see table p 39 contact type P male contact female contact orientation N normal W,, Y, Z see table p 4 ontact resistance : environmental class hermetic class 1 mω 7 mω.55 mω 3.8 mω.35 mω 2.4 mω Insulation resistance : 5 MΩ at 5 Vdc ielectric withstanding voltage 2 classes : services I and II ervice I II at ground 15 Vrms 23 Vrms at 2 m 375 Vrms 55 Vrms hell continuity with plug type 36 : environmental receptacle 5 mω hermetic receptacle 5 mω Resistance to fluids : fuel : ir 345 hydraulic fluid : Oronite M2V lubricant : ir 3517 obligatory suffix 3 rear teeth at 1 degrees with fluorsilicon grommet / interfacial seal H 3 rear teeth at 1 degrees rear teeth over 36 degrees limatic Operating temperatures : 55 to + (class R and N) 55 to +175 (class ) amp heat : 56 days alt spray : 48 hours Leakage : environmental version low pressure immersion : 33 mbar hermetic version differential pressure of 1 bar air/helium, leakage is 2,8 mm 3 / hr basic series 8525 R 32 P N H specification connector supplied without back, without specification L connector supplied without contact 8 connector supplied with special contacts # for.38 to.93 mm 2 cable or # for.93 to 1.91 mm 2 cable 68 mixed contact layouts (# and # ) connector supplied with special contacts # for.38 to.93 mm 2 cable, and standard contacts # 9 receptacle or 17 with straight spills contacts Ø.6 mm Ø 1. mm length max 7.3 mm connector supplied with backs 1 backnut 7 back for heatshrink sleeving 2 straight cable clamp 57 backnut for heatshrink sleeving 3 elbow cable clamp straight cable clamp* 11 backnut* 17 back for heatshrink sleeving* 13 elbow cable clamp* back for solder shield termination* 36 *onnector supplied with special contacts (large barrel) 1
2 8525 eries Hermetic connectors basic series 8525 I H 32 P N H type contact layout obligatory suffix I solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle hermetic version H stainless steel see table p 39 contact type P male contact only orientation N normal W,, Y, Z see table p 4 specification 2 large flange 2 H version c acks aluminum version basic series back type 1 backnut 2 straight cable clamp 3 elbow cable clamp 17 back for heatshrink sleeving 57 backnut for heatshrink sleeving back for solder shield termination plating black anodized R black anodized with blue anodized back nut N nickel yellow cadmium 8 acks stainless steel version basic series back type 1 backnut 2 straight cable clamp 8 specification obligatory suffix for back type 2 only 2 37
3 8525 eries ross reference list 38 3
4 8525 eries ontact layouts viewed from front face of male insulator 8 8 3* 8 98 s 6* * 19* 26* 32* 41* 55* 61* 3 # 6 # # 19 # 26 # 32 # 41 # 55 # 61 # 8 33* N 394 3* 15* 8* * 41* 31 3 # 1 coax 3 # # 1 # 8 # 11 # 37 # 2 # 27 # # 31 # 8 * 21 8* * 21* 19 8 # # 8 # 4 # 5 # 8 # # 21 # 19 # 5* 23 N N 29 5 # 4* 1 # 2 # 26 # # 2 # 8 # # 52 Ø 1 2 coax # N # * hermetic receptacle available pecials (HTP) coax 5 Ω 4 39
5 8525 eries Polarization viewed from front face of male insulator (insulator rotated inside metal body) ontacts layouts service I service II 15 Vrms 23 Vrms number of contacts angles in degrees N W Y Z contact # standard # special # standard # special # standard # special Technical characteristics diameter 1 mm 1 mm 1,6 mm 1,6 mm 2,4 mm 2,4 mm retention force 9 N 9 N 115 N 115 N 136 N 136 N current rating 7,5 7, contact resistance 1 mω 1 mω,55 mω,55 mω,35 mω,35 mω dmissible wires external Ø over insulator,98 to 2,11 mm,98 to 2,11 mm 1,34 to 2,62 mm 1,34 to 2,62 mm 2,45 to 4,1 mm,98 to 2,11 mm admissible section,21 to,6 mm 2,21 to,93 mm 2,6 to 1,34 mm 2,6 to 1,91 mm 2 1,91 to 3, mm 2,38 to,93 mm 2 wire gauge to to to to to to reducing sleeve for wire of,9 to,21 mm 2 Part numbers male contact female contact colour code redred redviolet blueblue blueorange yellowyellow violetyellow male contact thermocouple chromel colour code yellow yellow yellow yellow thermocouple alumel colour code black (1 dot) black (2 dots) black (1 dot) black (1 dot) female contact thermocouple chromel colour code yellow yellow yellow yellow thermocouple alumel colour code black black (2 dots) black (1 dot) black (1 dot) reducing sleeve 85 Minicoax contacts minicoax installed instead of contacts male contacts female contacts cables accepted R 3 U R 174 U 3 R 178 /U 21 R 8 /U R 196 /U R 179 /U 5
6 8525 eries imensions Plug type and 36 acks 4.6. plug back assembly overall length, H, M,, Y, backnut type Ø H L Ø straight cable clamp type 2 elbow cable clamp type 3 H L 1 M Ø min. L M N min. O P Q R R back for heatshrink sleeving type 17 Ø N Ø O T U min. V W Y Z backnut for heatshrink sleeving type 57 back for solder shield termination type W Y T Ø U Ø V Q Ø Ø Ø P ØZ
7 8525 eries quare flange receptacle type Ø panel cutout Ø Ø H L gasket sold separately.61 with backnut am nut receptacle type 17 8 H L panel cutout Ø L 4.6. Ø Ø with backnut H L quare flange hermetic receptacle type 2 H Ø Ø panel cutout Ø 4 holes Ø H Ø L M N 8 # ## H L M N
8 8525 eries quare flange hermetic receptacle type 2 H specif. 2 sealing gasket. 4 holes Ø H # ## H L M Ø Ø panel cutout M Ø L Ø older mounting hermetic receptacle type IH # ## Ø Ø Ø panel cutout Ø am nut hermetic receptacle type 7H H min Ø Ø panel cutout H Ø
9 8525 eries Receptacle with straight spill contacts receptacle type receptacle type 17 # Ø.6/. # Ø 1/.39 # Ø.6/. # Ø 1/.39 TYP TYP 17 8 min /.2 min / Pin / socket hermetic through bulkhead (pecials HTP) Ordering information basic series N 845 * * * * P * contact layout contact type polarization please contact us male / female please contact us imensions H I Ø ØI ØH
10 8525 eries ccessories ack bushings inner bushing N 1 inner bushing outer bushing N 2 part numbers outer bushings inner inner bushings N 1 bushings N askets part numbers gaskets for square flange receptacle Orings for jam nut receptacle Orings for square flange receptacle type types and 2 H (ordered separately) type 17 7 H (spare Oring) 2 H suffix. 2 (spare Oring) Reusable fixing plate Two, three or fourholes selflocking fixingplates are available at HTP see page
11 8525 eries aps basic series R cap type plating R black anodized N nickel yellow cadmium 8 specification 26 cap for plug (fixing on plug) 27 cap for square flange receptacle 28 cap for plug (fixing on back) 29 cap for jam nut receptacle metal chain, leave blank 26 nylon cord caps for receptacle caps for plug type 27 type 29 type 28 type 26 Ø Ø Ø Ø Ø Ø Ø H Ø L1 L1 L5 L4 type type type type Ø Ø Ø Ø Ø Ø Ø Ø L3 L2 L7 L H L1 L2 L3 L4 L5 L6 L
12 8526 eries pplications or all general purposes in aeromil area. tandards N 934 H 3 TT 5935 x 1 haracteristics Mechanical ndurance : 5 operations hock : according to N 934 H 3 Vibrations : to Hz, g ontact retention in insert : : 9 N : 115 N : 133 N lectrical current rating per contact : environmental class hermetic class 7, ontact resistance : environmental class hermetic class 1 mω 7 mω,55 mω 3,8 mω,35 mω 2,4 mω Insulation resistance : 5 mω at 5 Vdc ielectric withstanding voltage 2 classes : services I and II ervice I II at ground level 15 Vrms 23 Vrms at 2 m 375 Vrms 55 Vrms hell continuity : environmental receptacle 5 mω hermetic receptacle 5 mω Resistance to fluids : according to N 934 H 3 escription Intermateable and interchangeable with MIL eries I and II IN 2954 and PN luminum alloy olive green or nickel plating ayonet coupling old plating crimp contacts #, and # # and # coaxial contacts Hermetic versions available limatic Operating temperature : 55 to + (class N) 55 to +175 (class ) amp heat : 56 days alt spray : 48 hours Leakage : environmental version : when mated under a differential pressure of 2 bar, air leakage is cm 3 / hr low pressure immersion : 33 mbar hermetic version : differential pressure of 1 bar air/helium, leakage is 2,8 mm 3 / hr Ordering information nvironmental connectors basic series P N type square flange receptacle 7 jam nut receptacle 36 RI shielded plug plug plating olive green cadmium N nickel contact layout see table p 5 contact type P male contact female contact orientation N normal W,, Y, Z see table p 51 specification L supplied without contacts connectors supplied without back, with standard contacts : without digit specification for connector supplied with back and standard contacts : 1 backnut 2 straight cable clamp 3 elbow cable clamp 17 back for heatshrink sleeving 32 back for shield termination and heatshrink sleeving 9 receptacle or 7 with straight spill contacts Ø.6 mm length 7.3 mm. 47
13 8526 eries Hermetic connectors basic series H 6 P N type 1 solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle plating H tin over nickel contact layout see table p 5 contact type P male contact only orientation N normal W,, Y, Z see table p 51 acks basic series back type 1 backnut 2 straight cable clamp 3 elbow cable clamp 17 back for heatshrink sleeving 32 back for shield termination and heatshrink sleeving plating olive green cadmium N nickel 8 aps basic series caps type 26 cap for plug 27 cap for square flange receptacle 28 cap for plug 29 cap for jam nut receptacle plating olive green cadmium N nickel 8 specification metallic chain : without digit 26 nylon cord 48 13
14 8526 eries ross reference list ouriau N 934 H 3 esignation 8526 P H 3 P 7 square flange receptacle olive green plating 8526 N P H 3 P 6 square flange receptacle nickel plating P H 3 7 P 7 jam nut receptacle olive green plating N P H 3 7 P 6 jam nut receptacle nickel plating 8526 P H 3 6 P 7 plug olive green plating 8526 N P H 3 6 P 6 plug nickel plating P H 3 5 P 7 RI shielded plug olive green plating N P H 3 5 P 6 RI shielded plug nickel plating 85261H P H 3 1H P 2 solder flange receptacle 85262H P H 3 2H P 2 square flange receptacle 85267H P H 3 7H P 2 jam nut receptacle H backnut olive green plating N H backnut nickel plating H straight cable clamp olive green plating N H straight cable clamp nickel plating H elbow cable clamp olive green plating N H elbow cable clamp nickel plating H back for screen termination and heatshrink sleeving olive green plating N H back for screen termination and heatshrink sleeving nickel plating H cap for plug olive green plating, metallic chain, ring N H cap for plug nickel plating, metallic chain, ring H 3 7 cap for receptacle olive green cadmium, metallic chain, eyelet N H 3 6 cap for receptacle nickel plating metallic chain, eyelet H 3 7 cap for plug olive green cadmium, metallic chain, eyelet N H 3 6 cap for plug nickel plating, metallic chain, eyelet H cap for receptacle olive green cadmium, metallic chain, ring N H cap for receptacle nickel plating metallic chain, ring 85 N L plastic tool for contacts 85 N L plastic tool for contacts 85 N L plastic tool for conta 49
15 8526 eries ontact layouts viewed from front face of male insulator *8 3 6 * 6 * 19 * * 26 s 32 * * * * 61 3Ø1 6Ø1 Ø1 19Ø1 26Ø1 32Ø1 41Ø1 55Ø1 61Ø N *8 33 * 3 * 15 * 8 * 39 * 41 3Ø1 1 coax 3Ø1.6 Ø1 1Ø1.6 8Ø1.6 11Ø * * 8 37Ø1 2Ø1.6 * 27Ø1 Ø1.6 31Ø * 21 8Ø1 8Ø1 4Ø1.6 Ø1 1Ø1.6 8Ø2.4 Ø1.6 21Ø1.6 19Ø2.4 5 * 5 N 468 N 29 8Ø1 5Ø1.6 4 * 4 2Ø2.4 2Ø1 Ø2.4 52Ø1 2 coax # N 797 4Ø2.4 * hermetic receptacle available pecials HTP 58Ø1 1 oax 5 Ω 5 15
16 8526 eries Polarization (insulator rotated inside metal body) Z Y ontacts N Minicoax contacts minicoax installed instead of contacts layouts service I service II 15 Vrms 23 Vrms number of contacts angles in degrees N W Y Z male contacts female contacts cables accepted R174 U/ 3 R3 U/ R178 U/ 21 R 179 U minicoax installed instead of contacts W contact # standard # * # standard # * # standard Technical characteristics diameter 1 mm 1 mm 1,6 mm 1,6 mm 2,4 mm retention force 9 N 9 N 115 N 115 N 136 N current rating 7,5 7, contact resistance 1 mω 1 mω,55 mω,55 mω,35 mω dmissible wires external Ø over insulator,98 to 2,11 mm,98 to 2,11 mm 1,34 to 2,62 mm 1,34 to 2,62 mm 2,45 to 4,1 mm admissible section,21 to,6 mm 2,21 to,93 mm 2,6 to 1,34 mm 2,93 to 1,91 mm 2 1,91 to 3, mm 2 wire gauge to to to to to reducing sleeve for wire of,9 to,21 mm 2 Part numbers male contact female contact colour code redred redviolet blueblue blueorange yellowyellow male contact thermocouples chromel colour code yellow yellow yellow yellow thermocouples alumel colour code black black black black female contact thermocouples chromel colour code yellow yellow yellow yellow thermocouples alumel colour code black black black black reducing sleeve 85 male contacts female contacts cables accepted R 178 U R 179 U R 3 U R U 51
17 8526 eries imensions and 36 plug type min H Plug back assembly overall length, H, M, and Y acks backnut type 1 Ø Ø Ø traight cable clamp type 2 elbow cable clamp type H Ø for flange Ø 8 min L M N min O P Q Ø L M Ø for flange R T U V W Y back for heatshrink sleeving type 17 back for shielded termination and heatshrink sleeving type 32 R Y P V W ØN ØO Q ØN ØO
18 8526 eries nvironmental square flange receptacle type H panel cutout Ø Ø ØH with backnut front mounting flat mounting nvironmental jam nut receptacle 7 type H panel cutout H Ø Ø with backnut Ø older fixing receptacle 2 H type panel cutout Ø ØH Ø max L 8 # # # H L ### ###
19 8526 eries am nut receptacle 7 H type panel cutout Ø Ø Ø max Ø 8 # # # H min Hermetic solder fixing receptacle 1 H type Ø panel cutout ØH Ø soldering 8 # # # H aps basic series caps type 26 cap for plug (plug fixing) 27 cap for square flange receptacle 28 cap for plug (back fixing) 29 cap for jam nut receptacle plating olive green cadmium N nickel 8 specification metallic chain : without digit 26 nylon cord 54 19
20 Ø Ø Ø 8526 eries aps aps for plug aps for receptacle 26 type specif type L1 29 type specif. 26 L4 29 type L1 28 type specif type Ø L2 27 type specif type Ø L1 Ø Ø Panel gaskets 8 L1 L2 L3 L part numbers gaskets o ring jam nut receptacle square flange receptacle 7 and 7 H type ummy receptacle Ø 4 Ø 8 part number Olive green nickel N N N N N N N N N Reusable fixing plates Two, three or four holes self locking fixing plates are available at HTP. ee page
21 MIL eries II pplications or all general purposes in military applications tandards MIL eries II QPL approved escription tandard version luminum alloy olive green, nickel or, black, anodized plating ayonet coupling RI shielding plug old plating crimp contacts #,, and # # and # minicoaxial or thermocouple contacts Hermetic version available Light weight backs haracteristics Mechanical ndurance : 5 operations Plug M 3475 : 25 operations Plug M 3476 : 5 operations hock : 3 g 3 ms in three axes Vibration : MIL T 2, method 2, test condition II, letter (5 Hz; 41,7 g eff.) ontact retention in insert : : 9 N : 111 N : 133 N Ordering information environmental connectors lectrical. current rating per contact environmental class hermetic class 7, ontact resistance environmental class hermetic class 1 mω 7 mω,55 mω 3,8 mω,35 mω 2,4 mω Insulation resistance : 5 MΩ at 5 Vdc ielectric withstanding voltage ervice I II at ground level 15 Vrms 23 Vrms at 2 m 375 Vrms 55 Vrms hell continuity with plug M 3475, environmental receptacle 5 mω, hermetic receptacle 5 mω limatical Operating temperature : 55 to + (class L) 55 to (classes W and H) amp heat : MIL T 1344 method 2 Type II alt spray : class W : 5 hr class L : 48 hr Leakage : environmental version : when mated under a differential pressure of 1,3 bar. air leakage is 3,6 mm 3 /h low pressure immersion : 33 mbar hermetic version : differential pressure of 1 bar air'helium, leakage is 2,8 mm 3 /h Resistance to fluids MILL 788 MILL MILH 566 Hydraulic fluids M 2 V MIL diluted MIL 83 MILT 56 (P5) MIL 356 olvents basic series M 347 W P type 347 square flange receptacle 3474 jam nut receptacle 3475 RI shielded plug class and plating 8 contact layout contact type W olive green cadmium L nickel see table p 59 P male contact female contact less male contact less female contact polarization N normal ( not included in part number) W,, Y and Z see table p
22 MIL eries II Hermetic connectors basic series M 344 H P type materials and terminal contact layout see table p 59 contact type 344 square flange receptacle 3443 solder fixing receptacle 3449 jam nut receptacle class H hermetic 8 steel, solder bucket male only polarization N normal (not included in part number) W,, Y and Z see table p 6 acks ack type Plating MIL W N eries II OURIU acknut M M W 85231W 85231N traight cable clamp M M W 85252W 85252N lbow cable clamp M M W 85251W 85251N traight back for heatshrink sleeving M M854961W 8526W 8526N acknut for heatshrink sleeving W 85257N black anodized W olive green cadmium N nickel xample : M ross reference list Part number cross reference list OURIU and MIL eries II MIL eries II OURIU esignation M347 W P 8526W P square flange receptacle with male contacts M347 W 8526W P L square flange receptacle less male contacts M347 W 8526W square flange receptacle with female contacts M347 W 8526W L square flange receptacle less female contacts M3474 W P 85267W P jam nut receptacle with male contacts M3474 W 85267W P L jam nut receptacle less male contacts M3474 W 85267W jam nut receptacle with female contacts M3474 W 85267W L jam nut receptacle less female contacts M3475 W P 85265W P I shielded plug with male contacts 57
23 MIL eries II MIL eries II I ouriau esignation M3475 W 85265W P L RI shielded plug less male contacts M3475 W 85265W RI shielded plug with female contacts M3475 W 85265W L RI shielded plug less female contacts M3476 W P 85266W P plug with male contact M3476 W 85266W P L plug less male contact M3476 W 85266W plug with female contact M3476 W 85266W L plug less female contact M347 L P 8526L P square flange receptacle with male contacts M347 L 8526L P L square flange receptacle less male contacts M347 L 8526L square flange receptacle with female contacts M347 L 8526L L square flange receptacle less female contacts M3474 L P 85267L P jam nut receptacle with male contacts M3474 L 85267L P L jam nut receptacle less male contacts M3474 L 85267L jam nut receptacle with female contacts M3474 L 85267L L jam nut receptacle less female contacts M3475 L P 85265L P RI shielded plug with male contacts M3475 L 85265L P L RI shielded plug less male contacts M3475 L 85265L RI shielded plug with female contacts M3475 L 85265L L RI shielded plug less male contacts M3476 L P 85266L P plug with male contact M3476 L 85266L P L plug less male contact M3476 L 85266L plug with female contact M3476 L 85266L L plug with less female contact M344 H P 85262H P hermetic square flange receptacle M3443 H P 85261H P hermetic solder fixing receptacle M3449 H P 85267H P hermetic jam nut receptacle M8549/31 W 85231W backnut M8549/521 W 85252W straight cable clamp M8549/511 W 85251W elbow cable clamp M8549/61W 8526W back for heatshrink sleeving M8549/62 *85257W backnut for heatshrink sleeving M8549/ backnut M8549/ straight cable clamp M8549/ elbow cable clamp M8549/ back for heatshrink sleeving M8549/62 *85257 backnut for heatshrink sleeving M8549/31 N *85231N backnut M8549/521 N *85252N straight cable clamp M8549/511 N *85251N elbow cable clamp M8549/61N *8526N back for heatshrink sleeving M8549/62 N *85257N backnut for heatshrink sleeving M3929/41 male contact M3929/4111 male contact M3929/4113 male contact M3929/5115 female contact M3929/ female contact M3929/ female contact thermocouple contacts M3929/9135 *85875 malechromel M3929/9134 *85876 malealumel M3929/1 * femalechromel M3929/ * femalealumel coax contacts M3929/99 * female for R178/U cable M3929/76 * male for R178/U cable M filler plug M filler plug M filler plug M plastic tool for contact M plastic tool for contact M plastic tool for contact 58 23
24 MIL eries II ontacts layouts viewed from front face of male insulator hells 8 833* 6* * 19* 26* 32* 41* 55* 61* 3 # 6 # # 19 # 26 # 32 # 41 # 55 # 61 # 898* 3* 15* 8* 11 39* 21* 31 3 # 3 # # 1 # 8 # 11 # 37 # 2 # 27 # # 31 # * 8* * 21* 19 8 # 4 # 8 # # 21 # 5* 19 # 5 4* # * hermetic receptacle available not QPL to date 4 # 59
25 MIL eries II Polarization Insulator rotated inside metal body Z Y N W contacts layouts service I service II number of contacts Ø1 Ø1,6 Ø2,4 angles in degrees N W Y Z ontacts ontacts (Ø1mm) (Ø1.6mm) (Ø2.4mm) Minicoax contacts installed instead of contacts male contacts able accommodation (admissible section) external Ø over insulator,98/2,11 mm 1,34/2,62 mm 2,45/4,1 mm admissible section,21/,6 mm 2,6/1,34mm 2 1,91/3,mm 2 wire gauge / / / reducting sleeve for,9/,21 mm 2 wire of 28/ female contacts part numbers male contacts M3929/41 M3929/4111 M3929/4113 colour code brownbrownblack brownbrownbrown brownbrownorange female contacts M3929/5115 M3929/51 M3929/51 colour code brownbrowngreen brownbrownblue brownbrowngrey male contacts chromel thermocouple colour code brownorangegreen yellow yellow alumel thermocouple colour code brownorangeyellow black black cables accepted R3U R178 /U 21 R 179 /U oax contacts installed instead of contacts male contacts female contacts chromel thermocouple colour code brownyellowbrown yellow yellow alumel thermocouple colour code brownyellowblack black black female contacts reducing sleeve 85 cables accepted R 178 /U R 179 /U R 3 U R /U 6 25
26 MIL eries II imensions Plug M3475 and M3476 acks backnut type 31 Ø Ø,85 Plug back assembly overall length Ø s 8 min H traight cable clamp type 521 H Ø for flange Ø s 8 s min L M N mini O R T U V W P Q Y elbow cable clamp type 511 for heatshrink sleeving type 61 L M R ØN Ø for flange ØO backnut for heatshrink sleeving type 62 P T W Y Q ØU ØV 61 26
27 MIL eries II nvironmental square flange receptacle M347 1,55 s H Ø panel cutout with backnut mounted from front of panel mounted from rear of panel nvironmental jam nut receptacle M3474 s H panel cutout H Ø Ø with backnut Ø quare flange hermetic receptacle M344 panel cutout Ø max L s 8 # # # H L
28 MIL eries II am nut hermetic receptacle M3449 panel cutout s 8 # # # H min older mounted hermetic receptacle M3443 panel cutout ØH Ø soldering s 8 # # # H Reusable fixing plate Two, three or four holes self locking fixing plates are available at HTP. ee page 759. gaskets s gaskets square flange receptacle M347 and M344 (ordered separately) ring jam nut receptacle M3474 and M3449 (spare rings) M M M M M M M M M
29 MIL eries II Protective caps basic series R cap type plating 28 cap for plug 27 cap for square flange receptacle 29 cap for jam nut receptacle W olive green cadmium N nickel 8 aps for receptacle Type 29 Type 27 Ø aps for plug Type 28 ummy receptacle Ø L1 Ø Light weight and special backs L2 Ø 4 Ø Ø Ø L1 Ø hells L1 L Part number hells olive green nickel N N N N N N N N N basic series W cap type plating 2 straight cable clamp 3 elbow cable clamp 32 back with shield termination and heatshrink sleeving W olive green cadmium N nickel R black anodized
Contact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More informationElectrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms
Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More information891/2 Series. Description. Applications. Standards MIL-C 5015 G, class K NFL 54140
Applications Aircraft engines High temperature applications tandards IC 5015 G, class NF 54140 Description crew coupling High temperature connector for severe environment Fire resistant and fire wall High
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationMIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationHERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
More information9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More information8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More information8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
More informationMIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
More informationMIL-C Series 4 PART NUMBER CONSTRUCTION
MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More information983 SERIES CONNECTORS EN2997, ESC10, BACC63 SPECIFICATIONS
DEUTCH 983 ERIE CONNECTOR EN2997, EC10, BACC63 ECIFICATION Extreme Reliability in Harsh Aerospace & Military Applications CONTENT ECTION 1 : ealed Connectors 9 section 1-1 : sealed connectors standard
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More informationAmphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More information8N45S NC Series Non-safety classified connectors for EPR reactors
Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More informationMIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More information8LT SERIES. Aerospace & Military Bayonet Connectors. MIL-DTL Series I
8LT SERIES Aerospace & Military Bayonet Connectors Contents Overview 8LT Series Presentation... 06 8LT Series Applications... 06 A universal product platform... 07 Contact layouts... 08 Contact layouts
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationARINC 600 SERIES. Rack & Panel Rectangular Connectors. Selector Guide
ARIN 600 ERIE Rack & Panel Rectangular onnectors elector Guide ARIN 600 eries Overview Typical applications ockpit Display Units Mario Beauregard / Fotolia ourtesy of NORD-MIRO Picture All Rights Reserved
More informationSJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
More informationDEUTSCH DBAS Series Connectors
DEUTSH DS Series onnectors Standards SE/S81703 Series III, UTE 93422 Model HE 311 Extreme Reliability in Harsh erospace and Military pplications EROSPE, DEENSE & MRINE /// DEUTSH DS SERIES ONNETORS DEUTSH
More informationRECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationK2 Qualified Connectors for EPR Reactor
Reactor Class 1E connector with quick connect 1/4 turn bayonet coupling and shielding continuity designed to operate during normal & seismic conditions. K2 Qualified / RCC-E 2005 Compliant with EPR wiring
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationREVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationmicro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999
micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationCompact Low Profile Connectors with High Hermeticity Performance
EN2997 Hermetic Connectors Compact Low Profile Connectors with High Hermeticity Performance Adapted to sensor applications under high aeronautical constraints, such as engine & landing gear environments.
More informationDEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS
DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements
More informationFeatures and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
More informationAmphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationHIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More informationArinc 600 series. Contents. Discover Arinc 600. Range Overview. Technical Datas. Range Extension
Contents Company Profile... 02 Applications... 04 Benefits... 05 Arinc Speed Service... 05 Product Overview... 06 Cavity Overview... 07 Inserts Layouts: Shell Size 1... 08 Shell Size 2 & 3... 08 Technical
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationAmphenol Industrial Reverse Bayonet AIB
AI Coercial and Military Applications Amphenol Industrial Reverse ayonet AI AI Series is basically a MILDTL5015 (MILC5015) connector, but with an improved coupling system. AI Series replaces the threaded
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationPush-Pull connectors
Push-Pull connectors Introduction This catalog presents the push-pull connectors ranges for industrial applications. These products are particularly suitable for high reliability and high quality applications
More informationCannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More informationMIL-DTL-83723, Series III, Pyle
MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet
More informationPOLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
More informationGalley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market
Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd s APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology
More informationAmphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol
mphenol iniature ylindrical onnectors 12-070-15 eets I--26482, eries 1 pecifications mphenol Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility...................1,
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationPT/451. Subminiature cylindrical connectors PT/451
PT/451 Subminiature cylindrical connectors 3 grooves 3 rivets 5 differents keys MAIN CHARACTERISTICS E120/C Main features of each series PT/451 Series solder version (Military, aeronautics and industrial
More informationConnectors and interconnect systems for severe environments
Connectors and interconnect systems for severe environments The company designs, manufactures and markets high performance interconnect solutions for severe environments from industrial broadline and universal
More informationMIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationAmphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
More informationI Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
More informationMIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More information38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationLMV RANGE CONTENTS. General information
General information LMV RANGE CONTENTS Basic safety information. 2 Main features...... 3 Intermateability.. 3 Characteristics....... 4 Connection system.... 4 Ordering information Standard connector part
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More informationSRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard
SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More information