SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

Size: px

Start display at page:

Download "SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION"

Godwin Mitchell
5 years ago
Views:

1 RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL Rugged environmental MIL-DTL-5015 type Reverse Bayonet

terminations Features Superior sealing IP67 in unmated condition, IP68 when mated for complete system protection against water,

contact/wire termination options RJ45 plug and/or jack interface options available in Cat 5e or Cat 6a Glenair Italia S.p.A.

2 FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL Rugged environmental MIL-DTL-5015 type Reverse Bayonet Connectors with IP68 sealing, robust insert-to-shell grounding, and a complete range of wire, cable, and circuit board terminations Features Superior sealing IP67 in unmated condition, IP68 when mated for complete system protection against water, sand and dust Shielded/grounded coupler designs in both receptacle and plug connectors Crimp, solder-cup, PC tail, and Quadrax contact/wire termination options RJ45 plug and/or jack interface options available in Cat 5e or Cat 6a Glenair Italia S.p.A. Via del lavoro, Quarto Inferiore Granarolo dell Emilia - Italy Tel Fax info@glenair.it

RJ45 Ethernet MIL-DTL-5015 Type Product Selection Guide ITS300

Rear RJ45 Couplers ITS301 SuperSeal MIL-DTL-5015 Reverse-Bayonet

Termination ITS302 SuperSeal MIL-DTL-5015 Reverse-Bayonet

ITS303 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors with Front

MIL-DTL-5015 Reverse-Bayonet Connectors Feedthrough with RJ45

3 RJ45 Ethernet MIL-DTL-5015 Type Product Selection Guide ITS300 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors with Front and Rear RJ45 Couplers ITS301 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors with Front RJ45 Coupler and Rear Crimp Contact Termination ITS302 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors with Front RJ45 Coupler and Rear PC Tail Termination ITS303 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors with Front RJ45 Coupler and Rear Solder Cup Wire Termination ITS330 SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors Feedthrough with RJ45 Female to Female Coupling ITS300H SuperSeal MIL-DTL-5015 Reverse-Bayonet Connectors Backshell and Harness 3

4 MIL-DTL-5015 Type Materials and Performance Specifications Material and Finishes: Shell/coupling High strength aluminum alloy Plating Cadmium olive drab, Electrodeposited and Conductive Contacts PC tails, solder cup, and crimp contacts: Copper alloy, gold plated RJ45 coupler housing PPS Seals Silicon-based elastomer Stainless steel and other materials and finishes available. Please consult factory. Shell Type and s: Shell Type MIL-DTL-5015 Reverse-Bayonet Type s Shell sizes 18 Electrical Specifications: Data Rate 10BASE-T, 100BASE-TX, 1000BASE-T/1000BASE-TX and 10GBASE-T (Cat 6a only) Current Rating 1.5 Amps, Cat 5e and Cat 6a Frequency 100 MHz, Cat 5e 500 MHz, Cat 6a Wiring Straight through, Cat 5e and Cat 6a Shield Continuity Continous through coupler or continous coupler to shell Environmental / Mechanical Performance Sealing IP67 unmated condition, IP68 mated condition Operating Temperature Range -40 C to +85 C (Cat 5e, Low Temp.) Vibration 37 g s Mechanical Shock 300 g s Mating Cycles x ± W0.1 Back Panel Mounting Ø 31.4 Square Flange Mount Recommended Mounting Holes Panel Thickness.288 (7.32) Max Ø 4x4.5 Ø 35.1 Ø Front Min Panel Mounting Jam Nut Mount Recommended Panel Cut-Out Panel Thickness ( ) Electrical Specifications for RJ45 Cat 5e and Cat 6a MIL-DTL-5015 Reverse-Bayonet type Rating Cat 5e Cat 6a Data Rate 10BASE-T, 100BASE-TX, 1000BASE-T/1000BASE-TX AND 10GBASE-T* (10GBASE-T Cat 6a Only) Current Rating 1.5 Amps 1.5 Amps Frequency 100 MHz 500 MHz Wiring Straight Through Straight Through Shield continuity Continous Through Coupler or Continous Coupler to Shell Continous Coupler to Shell Cabling length 100 Meters 100 Meters 4

M39029/58-360 and M39029/56-348 850-002-22-360 and 850-001-22-348 Standard Duty Electrical Pin and Socket Contacts MIL-DTL-5015 Type SIZE #22 PIN AND SOCKET CONTACTS FOR USE WITH SUPERSEAL TM ITS 301

Color Bands.237.231.531 Ref.300.295 H x 45 Black Blue Orange.033.029.0305.0295 Flat.011 Max.062.060.048.046.0355.0335.022.018 Thru One Side Only.141 Manufacturer Symbol.129.122.237.231 Rad.020.010.

041.036 50 /44.166 Min Mfgr. Symbol.022.018 Thru One Side Only.141.040.030 60 Typ -22-348 Only.129.

5 M39029/ and M39029/ and Standard Duty Electrical Pin and Socket Contacts MIL-DTL-5015 Type SIZE #22 PIN AND SOCKET CONTACTS FOR USE WITH SUPERSEAL TM ITS 301 CONNECTORS CONNECTORS Mating End Wire Accomodation Military Part Number Glenair Part Number Pin AWG M39029/ Socket AWG M39029/ Pin Contact Color Bands Ref H x 45 Black Blue Orange Flat.011 Max Thru One Side Only.141 Manufacturer Symbol Rad Typ.004 Ø Socket Contact.626/ Min..855 (Ref) Gray Yellow Orange Color Bands x Typ Only.010 Typ Ø / Min Mfgr. Symbol Thru One Side Only Typ Only Part Number Military Number Pin M39029/ Socket M39029/ AWG Handling 22, 24, 26, 28 22, 24, 26, 28 Termination Tools Crimp Tool Positioner Insertion Tool Extraction Tool M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-09 M22520//7-07 M22520/2-07 M22520//7-05 M81969/14-01 M81969/8-01 M81969/14-01 M81969/8-01 M81969/14-01 M81969/8-02 M81969/14-01 M81969/8-02 5

MIL-DTL-5015 Type Contacts and Tools #22 Crimp Contacts Instructions HOW TO TERMINATE, INSTALL AND REMOVE SIZE #22 CONTACTS 1 Set Up Crimp Tool. Install proper positioner into crimp tool.

Remove wire insulation, taking care to avoid nicking or cutting wire strands. Strip wire to length shown. 3 Insert wire into contact. The wire should be visible in the inspection hole.

6 MIL-DTL-5015 Type Contacts and Tools #22 Crimp Contacts Instructions HOW TO TERMINATE, INSTALL AND REMOVE SIZE #22 CONTACTS 1 Set Up Crimp Tool. Install proper positioner into crimp tool. The label on the positioner shows the proper tool setting for each wire size. Turn the adjustment wheel to the correct setting. 2 Strip Wire. Remove wire insulation, taking care to avoid nicking or cutting wire strands. Strip wire to length shown. 3 Insert wire into contact. The wire should be visible in the inspection hole Insert contact into crimp tool as shown. Make sure that the contact is fully inserted into the tool. Squeeze handle completely. The ratchet mechanism will not allow a partial crimp. Release handle and remove contact. 5 Inspect crimped contact. Wire should be fully inserted and the crimp should be uniform in appearance. 3 4 Insertion Extraction Tool M81969/ Install contact into connector. Push the contact through the rear grommet until the contact locks into place. This can usually be done by hand without the need for a tool. If the wire gage is #26 or smaller, a tool is helpful. There are two techniques for installing contacts with a tool. One method is to push the contact in by hand, then use the tool to finish the insertion. The other method is to position the insertion tip against the contact shoulder, then insert the contact. Use insertion/extraction tool to install contacts. Slide the wire into the groove on the blue end of the tool. Slide the tool tip up the contact until it touches the contact shoulder. USE CARE TO AVOID DAMAGING THE CONNECTOR Contact Extraction. Use tool M81969/ The white end is used for contact extraction. First, push the wire into the groove of the metal tip. Slide the tip of the tool into the connector. Push the tool into the connector cavity until the tip bottoms in the connector. Avoid wiggling or rocking the tip. This may damage the cavity. A straight push is best. Pinch the wire between your finger and the white plastic grip and slide the tool and contact out of the connector. Wire insulation diameter greater than inches (1.14mm) is too large to work properly with the extraction tool. connector damage is possible. 7 6

ITS300 with RJ45 Jack/Jack or Plug/Jack Couplers

Grounding G = Insert grounded to shell (for use with

finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L

for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 =

01 = InLine 070 = Rear Panel Mounting Jam Nut 06 =

Option 1, 2, 3, or 4 RJ45 Orientation Options Code 1

±0,1 0,16 ± 35 ±0,2 1,38 ±0,008 27 ±0,1 1,06 ± 23,3

1-20 UNEF 39,5 max. 1,56 max. 39,8 max. 1,57 max.

InLine 34 ±0,2 1,34 ±0,008 25 ±0,1 0,98 ± 2,5 ±0,1 0,1

16,8 ±0,1 0,66 ± 1-20 UNEF 1-20 UNEF 5 max. [ 0.2 max.

7 ITS300 with RJ45 Jack/Jack or Plug/Jack Couplers MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp ITS G 18 5L 1 F6 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 RJ45 Orientation Options Code 1 Code 2 Code 3 Code 4 23,3 +0,2 0 0,92 +0,008 0,000 4 ±0,1 0,16 ± 35 ±0,2 1,38 ±0, ±0,1 1,06 ± 23,3 +0,2 0 0,92 +0,008 0,000 4 ±0,2 0,16 ±0, UNEF 1-20 UNEF 39,5 max. 1,56 max. 39,8 max. 1,57 max. (x4) 3,2 +0,1 0 0,13 + 0,000 39,5 max. 1,56 max. InLine 34 ±0,2 1,34 ±0, ±0,1 0,98 ± 2,5 ±0,1 0,1 ± 16,8 ±0,1 0,66 ± 42,5 max. 1,67 max. 16,8 ±0,1 0,66 ± 1-20 UNEF 1-20 UNEF 5 max. [ 0.2 max. ] Jum Nut 39,7 ±0,1 1,56 ± 47,6 ±0,2 1,87 ±0,008 Plug with male RJ45 module 39,5 ±0,2 1,56 ±0,008 7

MIL-DTL-5015 Type ITS301 with Front RJ45 Coupler and Rear Crimp Contact Termination Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none

Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 25 ±0,1 0,98 ± 46,05 45,9 max. [ 1,80 1,81 max.

8 MIL-DTL-5015 Type ITS301 with Front RJ45 Coupler and Rear Crimp Contact Termination Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp ITS G 18 5L 1 F6 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 25 ±0,1 0,98 ± 46,05 45,9 max. [ 1,80 1,81 max. ] 2,5 ±0,1 0,1 ± 16,8 ±0,1 0,66 ± 16,8 ±0,1 0,66 ± 1-20 UNEF 46,05 45,9 max. [ 1,80 1,81 max. ] 23,3 +0,2 0 0,92 +0,008 0,000 4 ±0,2 0,16 ±0,008 5 max. [ 0.2 max. ] 39,7 1,56 47,8 ±0,2 1,88 ±0,008 Jum Nut 1-20 UNEF InLine 34 ±0,2 1,34 ±0,008 rear view #22 crimp 46,05 45,9 max. [ 1,81 1,80 max. ] 23,3 +0,2 0 0,92 +0,008 0,000 4 ±0,2 0,16 ±0, ±0,2 1,38 ±0, ±0,1 1,06 ± UNEF (x4) 3,2 +0,1 0 0,13 + 0,000 8

ITS302 with Front RJ45 Coupler and Rear PC Tail Termination MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only

Styles 03 = Rear Panel Mounting 07 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 22,87 23,3 ±0,1 ±0,1 [ 0,91 ± 0,9 ] ± 3,26 2,61 ±0,1 ±0,1 [ 0,13 0,10 ± ] ± 16,8 ±0,1

9 ITS302 with Front RJ45 Coupler and Rear PC Tail Termination MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp ITS G 18 5L 1 F6 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Connector Styles 03 = Rear Panel Mounting 07 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 22,87 23,3 ±0,1 ±0,1 [ 0,91 ± 0,9 ] ± 3,26 2,61 ±0,1 ±0,1 [ 0,13 0,10 ± ] ± 16,8 ±0,1 0,66 ±.080 Typ (x8) 3,43 ±0,36 0,14 ±0,014 16,8 ±0,1 0,66 ± 4x.080 4x Recommended PCB Layout (Solder Side Of Board) 8x Ø.030 2x Ø.060 3,5 max. [ max. ] (x2) 3,94 ±0,36 0,16 ±0,014 2,5 2,11 ±0,1 [ 0,08 0,1 ± ] (x8) ± 0.05 [ ± ] Jum Nut 39,7 ±0,1 1,56 ± 47,6 ±0,2 1,87 ±0,008 23,3 ±0,1 0,92 ± 2,095 2,11 ±0,1 ±0,1 [ 0,08 0,08 ± ± ] (x8) 3,43 ±0,36 0,14 ±0, ±0,2 1,38 ±0, ±0,1 1,06 ± (x8) ± 0.05 [ ± ] (x2) 3,94 ±0,36 0,16 ±0,014 2,61 ±0,1 0,1 ± (x4) 3,2 +0,2 0 0,13 +0,008 0,000 9

MIL-DTL-5015 Type ITS303 with Front RJ45 Coupler and Rear Solder Cup Wire Termination Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none

Connector Styles 03 = Rear Panel Mounting 07 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 22,87 23,3 ±0,1 [ 0,91 ± ] 2,5 ±0,1 [ 0,09 0,1 ± ] 16,8 ±0,1 0,66 ±.

10 MIL-DTL-5015 Type ITS303 with Front RJ45 Coupler and Rear Solder Cup Wire Termination Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp ITS G 18 5L 1 F6 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Connector Styles 03 = Rear Panel Mounting 07 = Rear Panel Mounting Jam Nut Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 22,87 23,3 ±0,1 [ 0,91 ± ] 2,5 ±0,1 [ 0,09 0,1 ± ] 16,8 ±0,1 0,66 ±.080 Typ 4x ±0,1 0,98 ± 16,8 ±0,1 0,66 ± 4x x Ø Recommended PCB Layout (Solder Side Of Board) 2x Ø.060 3,5 max. 0,14 max. 3,81 ±0,64 0,15 ±0,025 5,908 max. max. [ 0,23 max. ] Jum Nut 39,7 ±0,1 1,56 ± 47,6 ±0,2 1,87 ±0, ±0,2 1,38 ±0,008 23,3 ±0,1 0,92 ± 3 ±0,1 0,12 ± 27 ±0,1 1,06 ± ±0,1 0,98 ± 3,81 ±0,64 0,15 ±0,025 5,495 5,5 max. [ 0,21 0,22 max. ] (x4) 3,2 0,13 10

ITS330 with RJ45 Female to Female Coupling MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7

11 ITS330 with RJ45 Female to Female Coupling MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp ITS330 03PP G 18 5L 1 F6 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Connector Styles 03PP = Rear Panel Mounting Bulkhead feedthru Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 RJ45 Orientation Options Code 1 Code 2 Code 3 Code 4 21 ±0,1 0,83 ± 39 max. 1,54 max. 2 ±0,1 0,08 ± 35 ±0,2 1,38 ±0, ±0,1 1,06 ± 5 Max 0,2 3,2 +0,1 0 0,13 + 0,000 Bulkhead feedthru 11

MIL-DTL-5015 Type ITS300H Backshell and Harness Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with

last Page) ITS300H 030 G 18 5L 1 ZL F6 Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45

12 MIL-DTL-5015 Type ITS300H Backshell and Harness Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp Backshell With blending platform for direct attachment of cable shield and shrinkboot (See last Page) ITS300H 030 G 18 5L 1 ZL F6 Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive ~ 82 3,21 ~ 79 3,13 15,8 14, ,3 15,8 Plug and without Pigtail 12

13 ITS300H Backshell and Harness MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp Backshell With blending platform for direct attachment of cable shield and shrinkboot (See last Page) ITS300H 030 G 18 5L 1 ZL 0.5 F6 Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 Cable Lenght 0.5 = 0,50 mt Pigtail (See last Page) Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive RJ45 Orientation Options Code 1 Code 2 Code 3 Code 4 X. XX METERS ~ 110 4,33 X. XX METERS ~ 110 4,33 Plug and with Pigtail 13

14 MIL-DTL-5015 Type ITS300H Backshell and Harness Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp Backshell Internal Thread M = M16 x 1.5 PG = PG9 ITS300H 030 G 18 5L 1 M F6 Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive ~ 55 2,17 ~ 55 2,17 VEDI TABELLA I SEE TABLE I M16 x 1.5 or PG9 VEDI TABELLA I SEE TABLE I M16 x 1.5 or PG9 Plug and without Cable Gland RJ45 Orientation Options Code 1 Code 2 Code 3 Code 4 14

ITS300H Backshell and Harness MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H =

15 ITS300H Backshell and Harness MIL-DTL-5015 Type Basic Number Insert-to-Shell Grounding G = Insert grounded to shell (for use with shielded cable) Omit for none (Use only with G3 or F7 finish) 5H = Cat5e, High Temp 6A = Cat6a, High Temp 5L = Cat5e, Low Temp Metallic Cable Gland See Table below ITS300H 030 G 18 5L 1 MS1 0.5 F6 Connector Styles 030 = Rear Panel Mounting 01 = InLine 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug Connector Shell 18 RJ45 Orientation Option 1, 2, 3, or 4 Cable Lenght 0.5 = 0,50 mt Pigtail (See last Page) Finish Omit for Cadmium Olive Drab (G3) F6 = Electrodeposited F7 = Conductive Metallic Cable Gland Type Cable Range Shield M1 6 8 No M No MS1 6 8 Yes MS Yes ~ 70 2,76 ~ 70 2,76 See VEDI Metallic TABELLA I Cable SEE TABLE I Gland Table See Metallic VEDI TABELLA Cable I SEE TABLE I Gland Table Plug and without Pigtail X. XX METERS X. XX METERS Plug and with Pigtail 15

MIL-DTL-5015 Type Shielded Cables and Shrinkboot Specifications CAT5 100 OHM 4 x 22 AWG Conductor: stranded, silver plated copper Colours: white-blue, orange-yellow Number or cores: 4 Cross section:

16 MIL-DTL-5015 Type Shielded Cables and Shrinkboot Specifications CAT5 100 OHM 4 x 22 AWG Conductor: stranded, silver plated copper Colours: white-blue, orange-yellow Number or cores: 4 Cross section: 22 AWG EMC screen: aluminium tape, laminated (overall) EMC screen: braid, tin plated copper (overall) Cable diameter: 7.25 ± 0.3 mm CAT7 100 OHM 4x2x24AWG Conductor: stranded, silver plated copper Colours: white-orange, white-green, white-brown, white-blue Number or cores: 8 Cross section: 22 AWG EMC screen: aluminium tape, laminated (overall) EMC screen: braid, tin plated copper (overall) Cable diameter: 8 ± 0.3 mm Type 1 High-Performance Elastomer Boots For Advanced Temperature And Chemical Tolerance Semi-rigid high performance short profi le boots combine excellent resistance to fuels, oils and solvents with superior performance at extreme temperatures. Rated for 3000 hours continuous operation at +150 C, these boots fi t most standard boot adapters for circular connectors and are suited for applications where effi cient conservation of space is required. Material meets the requirements of VG95343 Type 6, BSG DE, EN and SAE AS5258 Type H. These boots are recommended for demanding applications such as military vehicles and petrochemical exploration. Glenair P/N : S103W2 16

MIL-DTL-38999 TYPE FIELD-READY USB 2.0/3.

against water, sand and dust Highly durable USB design, including enhanced

shock performance Shielded/grounded coupler designs in both receptacle and

self-locking, triple-start threaded coupling design of MIL-DTL-38999

17 MIL-DTL TYPE FIELD-READY USB 2.0/3.0 Features Superior sealing IP68 when mated for complete system protection against water, sand and dust Highly durable USB design, including enhanced operating temperature, increased life-cycle, and rugged vibration and shock performance Shielded/grounded coupler designs in both receptacle and plug connectors Crimp, solder-cup, PC tail, and Quadrax contact/wire termination options USB 2.0 and 3.0 plug and receptacle versions Industry standard scoop proof, self-locking, triple-start threaded coupling design of MIL-DTL Series III type connectors Intermateable with other MIL-DTL type RJ45 field-duty connectors Glenair, Inc Air Way Glendale, CA

18 Out of This World INTERCONNECT SOLUTIONS Glenair, Inc Air Way Glendale, California Telephone: Fax: Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT Telephone: Facsimile: Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Telephone: Facsimile: Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL Telephone: Facsimile: Glenair Nordic AB Gustav III : S Boulevard 46 S Solna Sweden Telephone: Facsimile: sales@glenair.se Glenair Electric GmbH Schaberweg 28 D Bad Homburg Germany Telephone: / Facsimile: / germany@glenair.com Glenair Iberica C/ La Vega, Velada Spain Telephone: Facsimile: sales@glenair.es Glenair Italia S.p.A. Via Del Lavoro, Quarto Inferiore Granarolo dell Emilia Bologna, Italy Telephone: Facsimile: info@glenair.it Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc # Toulouse France Telephone: Facsimile: sales@glenair.fr 2013 Glenair, Inc. Printed in U.S.A.

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair