µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors

Transcription

1 Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance for use in the harshest environments. Main Features: 10Gb+: exceeds 10Gb/s Ethernet following IEEE 802.3an-2006 : 10Gase-T at.6a connector according to TIA568.2 and ISO/IE11801 standard Environmental testing based on MIL-DTL series III military specifications (Thread version) Environmental testing based on MIL-DTL military specifications (Push Pull version) Miniature : 15 mm(.59 ) max external diameter Receptacle and in-line receptacle compatible with both thread and Push Pull plugs 4 pairs totally insulated throughout the connector minimum cross-talk between the four pairs Patented special interfacial shapes minimum perturbation at the interface of each pair Thread and Push Pull coupling mechanisms 2000 mating cycles & high vibration resistance Machined rass shells Plating available: Olive Drab admium not ROHS compliant lack Nickel, and unplated brass ROHS compliant shell to shell continuity and 500h salt spray resistance Solder contact : max AWG24 rimp contact : AWG 24 to 28 IP68 sealing mated and unmated for P receptacles 1500 Vrms Dielectric Withstanding Voltage Machined & gold plated Solder and rimp contacts Temperature range : - 55 / design & performance according to the innercontact of M39029/77-429#16 M39029/76425# contact contacts are crimped with standard crimping tool M22520/ Amphenol µom positioner Markets & Applications 4ISR Ground Vehicle Applications : Shipboard In Flight Entrertainment* * µom approved by GORE Navy ommercial Aerospace Railways

2 Transmission Data Excee ds 10Gb/s Ether require net ment Female Receptacles Female receptacle for printed circuit board UOM-10G+ R P x Panel mount female receptacle with metallic band backshell UOM-10G+ R x x Nota: metallic band and heatshrink sleeve are provided with the connector How to Order Female Receptacles R P R: receptacle (push pull or thread) P: P UOM for order designation μom for marking on connectors

3 Male Plugs Female in-line Receptacles Female in-line receptacle with cable gland backshell Plug with cable gland backshell UOM-10G+ L x x G x UOM-10G+ P T x x G x UOM-10G+ P P x x G x Thread version Push Pull version Female in-line receptacle with metallic band backshell Plug with metallic band backshell UOM-10G+ L x x UOM-10G+ P T x x UOM-10G+ P P x x 59 [2.32] 70 [2.75] 59 [2.32] Thread version Nota: Metallic band and heatshrink sleeve are provided with the connector Push Pull version Nota: Metallic band and heatshrink sleeve are provided with the connector How to Order Female in-line Receptacles How to Order Male Plugs P T G A UOM for order designation μom for marking on connectors ackshell type G: gland : band G: gland A: for cable diam 7.5mm : band For other cable diameter, please consult us able diameter (for gland backshell only) ackshell type able diameter (for gland backshell only) A: for cable diam 7.5mm G A Mating (for plugs only) P: push-pull S L: in line receptacle (push pull or thread) P: plug T: thread L For other cable diameter, please consult us UOM for order designation μom for marking on connectors

4 µom plug - µom inline receptacle ordsets UOM-10G+ F x x x xxx onnector number x: see the 'How to order' below to complete your part number µom plug - µom plug cordset UOM-10G+ x x x xxx Type of cable used: AT 7 HFFR - According to EN Stranded bare copper wire (26 AWG) 4 screened twisted pairs: 2 wires twisted to a pair, Alulaminate foil overlapped Shield braiding of tinned copper wires, about 80% coverage Strain member of Kevlar Jacket in black Polyurethane (PUR), glossy finish, acc to DIN VDE 0282 External diameter 7.0 +/-0.3 mm UV & Hydrolysis resistant, Halogen free, RoHS compliant Max Pull force: 800 N, Weight : about 54 kg/km Temperature : - 40 / + 85 Min. bending radius allowed: repeated 8 x 0, single 4 x 0 GORE has approved µom assembled onto their cat6a cable P/N : RN Information available on GORE website. µom plug - RJ45 at6a plug cordset How to Order ordsets UOM-10G+ D x x x xxx T 015 : µom plug - µom plug cordset RJ45 at6a plug D: µom plug - RJ45 at6a plug cordset E: µom panel mount receptacle - RJ45 at6a plug cordset F: µom plug - µom inline receptacle cordset Open versions: G: µom plug - no connector at the end H: µom panel mount receptacle - no connector at the end J: µom inline receptacle - no connector at the end Mating (for plugs only) T: thread µom panel mount receptacle - RJ45 at6a plug UOM-10G+ E x x xxx RJ45 at6a plug Total length - For other lengths, please consult us. 002: 20 cm [7.87] 005: 50 cm [19.68] 010: 1.0 m [39.37] 015: 1.5 m [59.05] 020: 2.0 m [78.74] 050: 5.0 m [196.85] 100: 10.0 m [393.70] UOM for order designation μom for marking on connectors

5 Accesories APS for receptacles IP68 neoprene cap Nota: plan a type M3 hole on the panel IP68 metallic cap x to be replaced by for lack electrophoresis plating G for Olive drab cadmium plating U for Unplated brass x x Ø4,1 [0,161] IP68 metallic cap with metallic tie on panel Nota: plan a hole on the panel APS for plugs ap in neoprene Ø12 [0,48] Or IP68 metallic cap with a 012 fixation ring APS for in line receptacles ap in neoprene Dummy female receptacle x x to be replaced by for lack nickel plating G for Olive drab cadmium plating U for Unplated brass Spares rimp Pin rimp Socket Tools Nut clamping tool for receptacle Only for RPx receptacles Insertion tool for crimp contacts Other tools: razing tool for receptacle & in-line receptacle ontact positioner for M22520/2-01 crimping tool razing tool for plug Nota: the cabling instructions are available upon demand (ref. N ). Amphenol Socapex 948, promenade de l Arve P Thyez edex - France Phone: +33 (0) contact@amphenol-socapex.fr We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Follow Amphenol Socapex on social media : DO ANG - August 2017