8D Series D38999 Aluminum Series

Transcription

1 onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle with clinch nuts (see page 91). Jam nut receptacle with double flange (see page 94) Type: -: onnectors with standard crimp contacts. L: Receptacle with long P tail (male and female #22D, #20). : Receptacle with short P tail (male and female #22D, #20, #16). S: Receptacle with specific P tail (male et female #22D) W: Receptacle with male contacts #22D for wire wrap (3 wraps) T: Receptacle with male contacts #20 for wire wrap (2 wraps) P: Receptacle with solder cup contacts - please consult us. see page 84 for Reinforced sealing Series with solder cup contacts. see page 67 for solder cup contacts information : 09, 11, 13, 15, 17, 19, 21, 23, 25 Plating: W: Olive drab cadmium F: Nickel Z: Green zinc cobalt Z: Black zinc nickel ontact layout: See pages 13 to 19 ontact type: P: Pin A: onnector supplied less pin contact or with specific contacts (connector marking: A + orientation) S: Socket B: onnector supplied less socket contact or with specific contacts (connector marking: B + orientation) Orientation: N, A, B,, D, E (see page 73) Specification: 046: Tinned straight P tail 251: onnector provided with power contacts (layouts with contact #8) 022: Fuel tank Special custom: None: Standard plastic cap M: Antistatic plastic cap L: For P or S contact type only, connectors delivered without contacts, connectors marking P or S plus orientation Note: P tail contacts without shoulder also available. Please see page SOURIAU

2 MIL-DTL part numbers* Basic Series D38999/ 20 W B 35 P N L style: 20: Square flange receptacle 24: Jam nut receptacle 26: Plug with RFI shielding. Plating: Z: Black zinc nickel W: Olive drab cadmium F: Nickel : A, B,, D, E, F, G, H, J ontact layout: See page 18 for layout according to MIL-DTL ontact type: P: Pin A: onnector supplied less pin contact or with specific contacts (connector marking: A + orientation) S: Socket B: onnector supplied less socket contact or with specific contacts (connector marking: B + orientation) Orientation: N, A, B,, D, E (see page 73) L: For P or S contact type only, connector delevired without contacts, connector marking P or S (without L) * Note: To place an order of MIL connectors delivered without MIL removable crimp contacts and keep P or S plus orientation marking, it must be specify clearly on the order (by adding a suffix L at the end of the P/N or specified in comment). EN3645 part numbers Basic Series EN3645 W 6 G N 35 B N Plating: W: Olive drab cadmium F: Nickel style: 0: Square flange receptacle 6: Plug 7: Jam nut receptacle : 09=A, 11=B, 13=, 15=D, 17=E, 19=F, 21=G, 23=H, 25=J Grounding: N: Standard insert not grounded ontact layout: See page 18 for layout according to EN3645 ontact type: A: onnector supplied less pin contact B: onnector supplied less socket contact F: Socket M: Pin Orientation: N, A, B,, D, E (see page 73) SOURIAU 23

3 Dimensions Receptacle type 0 A B A Max B Max Max D E ±0.3 F G H ±0.2 J ± (A) M12 x 1-6g E F G D 11 (B) M15 x 1-6g () M18 x 1-6g (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g (G) M31 x 1-6g H 23 (H) M34 x 1-6g (J) M37 x 1-6g J Receptacle type 7 B A ±0.15 B Max Max D E Max F ±0.4 ØG Max A 09 (A) M12 x 1-6g Max D 11 (B) M15 x 1-6g () M18 x 1-6g (D) M22 x 1-6g ØG 17 (E) M25 x 1-6g (F) M28 x 1-6g (G) M31 x 1-6g (H) (J) E F Recommended coupling torque on panel for jam nut receptacle (type 7) 09 (A) 11 (B) 13 () 15 (D) 17 (E) 19 (F) 21 (G) 23 (H) 25 (J) oupling torque (±0.5 N.m) SOURIAU

4 In line receptacle type 1 Plug type Maxi A 09 (A) M12 x 1-6g (B) M15 x 1-6g () M18 x 1-6g (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g (G) M31 x 1-6g (H) M34 x 1-6g (J) M37 x 1-6g A Max Max 09 (A) M12 x 1-6g (B) M15 x 1-6g () M18 x 1-6g (D) M22 x 1-6g (E) M25 x 1-6g (F) M28 x 1-6g (G) M31 x 1-6g (H) M34 x 1-6g (J) M37 x 1-6g Mated connectors dimensions Type 0 with plug A B Type 7 with plug D A Max B Max Max D Max 09 (A) 11 (B) 13 () (D) 17 (E) 19 (F) 21 (G) (H) 25 (J) SOURIAU 25

5 Receptacle with straight P tail contacts L1 L2 L3 L2 L1 L3 ontact ontact type P tail type 09 (A) 11 (B) 13 () 15 () 17 (E) 19 (F) 21 (G) 23 (H) 25 (J) #22D M & F L & 0.70 A #22D M & F S 0.50 #20 M & F 0.70 #16 M & F 1.12 ±0.03 Min #22D M L & Max #22D M L & Min #22D F L & Max #22D F L & Min #22D M S Max #22D M S Min #22D F S Max #22D F S Min #20 M Max #20 M Min #20 F Max #20 F Min #16 M Max #16 M Min #16 F Max #16 F #22D M & F L 8.50 #22D M & F 4.00 L2 #22D M & F S 5.10 #20 M & F 5.10 #16 M & F 5 ±0.1 Min #22D M L & Max #22D M L & Min #22D F L & Max #22D F L & Min #22D M S Max #22D M S Min #22D F S Max #22D F S Min #20 M Max #20 M Min #20 F Max #20 F Min #16 M Max #16 M Min #16 F Max #16 F M: Male contact F: Female contact L: Long P tail : Short P tail S: Specific P tail Dimensions in millimeters SOURIAU

6 Aluminum backshells Ordering information Basic Series 8D AB 05 A 17 W S 02 - Accessories type Type: 01: Backnut 02: able clamp 03: Shrink boot 04: rimp ring 05: Band lock Angle: A: Straight B: 90 (Type 02 only) : 09, 11, 13, 15, 17, 19, 21, 23, 25 Finish: Z: Black zinc nickel W: Olive green cadmium F: Nickel A: Black anodized Self locking option: None S: Self locking (available for Types 01 & 02 - mandatory for Type 05) able entry (Type 05 only): 02, 03 (03 mandatory for shell 09 & 11) Drain hole option: None D: Drain hole (Type 03 only) Dimensions Aluminum backshell Type 01 - Backnut 9.65 Max (Self locking type) 6.35 Max (Non self locking type) Min Max : See page 30 for information SOURIAU 27

7 Aluminum backshell Type 02 - able clamp D A Angle - straight B Angle - 90 F : See page 30 for information. E Min Max Max Max D Max E Max F Max Aluminum backshell Type 03 - Shrink boot 18 Max Min Max Max Ø : See page 30 for information SOURIAU

8 Aluminum backshell Type 04 - rimp ring 22 Max Min Max : See page 30 for information. Aluminum backshell Type 05 - Band lock 34 Max Max - Entry Max : See page 30 for information SOURIAU 29

9 information UNEF 09 M12x1.0-6H-0.10R 11 M15x1.0-6H-0.10R 13 M18x1.0-6H-0.10R 15 M22x1.0-6H-0.10R 17 M25x1.0-6H-0.10R 19 M28x1.0-6H-0.10R 21 M31x1.0-6H-0.10R 23 M34x1.0-6H-0.10R 25 M37x1.0-6H-0.10R Recommended installation torque Size Installation Torque (Inch-Pounds) Note: Torque values are based on 80% of the coupling thread strength specified in SAE-AS85049 standard. Band-it Designation Flat stainless steel standard band Pre-coiled stainless steel standard band Hand banding tool Part number Tail length indicator mark 8.9 (REF.) 1.9 (REF.) 6.1 (REF.) 4.0 (REF.) ± (REF.) MIL specification For aluminum bachshells MIL specification, please consult us SOURIAU

10 Dummy receptacle Dimensions A B oupling seal F G E D Souriau Part number * 8D0-09GUR 8D0-09FUR 8D0-11GUR 8D0-11FUR 8D0-13GUR 8D0-13FUR 8D0-15GUR 8D0-15FUR 8D0-17GUR 8D0-17FUR 8D0-19GUR 8D0-19FUR 8D0-21GUR 8D0-21FUR 8D0-23GUR 8D0-23FUR 8D0-25GUR 8D0-25FUR A Max B Max ±0.30 D E F ±0.20 G ± * G: Olive green cadmium F: Nickel SOURIAU 31

11 aps aps for receptacle (D38999/33 - S2453) With rope and eyelet With rope and ring Part numbers Plating ** Olive green plating 9 S W-** D38999/33 W 09 R 11 S W-** D38999/33 W 11 R 13 S W-** D38999/33 W 13 R 15 S W-** D38999/33 W 15 R 17 S W-** D38999/33 W 17 R 19 S W-** D38999/33 W 19 R 21 S W-** D38999/33 W 21 R 23 S W-** D38999/33 W 23 R 25 S W-** D38999/33 W 25 R Part numbers Plating ** Olive green plating 9 S W-**-1 D38999/33 W 09 N 11 S W-**-1 D38999/33 W 11 N 13 S W-**-1 D38999/33 W 13 N 15 S W-**-1 D38999/33 W 15 N 17 S W-**-1 D38999/33 W 17 N 19 S W-**-1 D38999/33 W 19 N 21 S W-**-1 D38999/33 W 21 N 23 S W-**-1 D38999/33 W 23 N 25 S W-**-1 D38999/33 W 25 N aps for plug (D38999/32 - S2454) With rope and eyelet With rope and ring Part numbers Plating ** Olive green plating 9 S F-** S D38999/32 W 09 R 11 S F-** S D38999/32 W 11 R 13 S F-** S D38999/32 W 13 R 15 S F-** S D38999/32 W 15 R 17 S F-** S D38999/32 W 17 R 19 S F-** S D38999/32 W 19 R 21 S F-** S D38999/32 W 21 R 23 S F-** S D38999/32 W 23 R 25 S F-** S D38999/32 W 25 R Part numbers Plating ** Olive green plating 9 S W-** S D38999/32 W 09 N 11 S W-** S D38999/32 W 11 N 13 S W-** S D38999/32 W 13 N 15 S W-** S D38999/32 W 15 N 17 S W-** S D38999/32 W 17 N 19 S W-** S D38999/32 W 19 N 21 S W-** S D38999/32 W 21 N 23 S W-** S D38999/32 W 23 N 25 S W-** S D38999/32 W 25 N ** Plating - 34 : Olive green cadmium. Plating - 12 : Nickel. Note: Method of attachement to cover and ring is optional. Please consult us SOURIAU

12 onnectors weight With contacts Without contact Plug Receptacle Receptacle Plug Receptacle Receptacle (type 5) (type 0) (type 7) (type 5) (type 0) (type 7) Male Female Male Female Male Female Male Female Male Female Male Female Weight in gram (+/- 15%) SOURIAU 33