Connect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter.

Size: px
Start display at page:

Download "Connect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter."

Transcription

1 Connect - Contact - Control Ø Ø6 Ø9 Circular Audio Miniature Connectors Series NF07 Series NF0,5 Ø3. max. cable diameter 39.5 max. 4.5 A 58 e

2 Connectors for audio technology: Series NF07 and NF0 Our well-proven 7- and 0-pole circular audio miniature connectors NF07 and NF0 are specially designed for communication engineering. They provide high reliability under extreme ambient conditions. The present catalogue describes the watertight connectors with a bayonet groove, covering a wide temperature range. The modular design provides many combinations allowing to suit your particular requirements. Features Our 7- and 0-pole circular audio miniature connectors are watertight and locked by a bayonet coupling. Hard gold plated spring-loaded contacts with self cleaning faces ensure a continuously low contact resistance. The following series are available: Series Description 7-pole standard series page 7 7-pole series suitable for shielding page 6 0-pole series suitable for shielding page 6 Important features of our circular audio miniature connectors series NF07 and NF0: General application characteristics: Reliability under extreme ambient conditions High protection degree and water-tightness even when unmated Application under a wide temperature range. Audio connectors to military specification (Photo: SEL Defence Systems) Electrical features: Scoop proof: The design prevents a short-circuit between plug shells and receptacle contacts while mating. Spring-loaded contacts: hard gold plated with selfcleaning faces. High shock and vibration resistance and a very low contact resistance allow high reliability even at low voltages and currents. EMP Shielding: Series NF0 and the shielded NF07 show good attenuation characteristics with regard to electromagnetic influences, HF influences and pulse repetition frequencies. Contact termination: Available as follows: solder cup for connecting leads soldering pin 3.5 mm for printed board terminal soldering pin 8.0 mm for printed board terminal Mechanical features: Shell material: All shells consist of stainless steel and non magnetic materials. The receptacle shells and the plug shells are black anodised. The backfittings are olive drab respectively black finished. The modular design of the connector systems allows many combinations. The following backend fittings are available: for heatshrink sleeves for cable sleeves for screen termination for overmolding. Coding: The NF series connectors feature a variety of keypositions for mating. NF0 series comes with an option of 5 bayonet latch positions, whereas NF07 series connectors are available with 4 max. A marking colour corresponds to each of the 5 different positions. Optional customized filters: Planar technique: Modular technique: Tubular technique: C-filter C-filter, π-filter C-filter, π-filter, RFI-filter

3 3 Technical Data Series NF07 Standard NF07 for shielding NF0 for shielding No. of poles Contact arrangement Plug: Rear view Receptacle: Front view Contact identification Plug: Rear view Receptacle: Front view B C D A G F E B C D A G F E A B G H K C J F D E Rated voltage 50 V 50 V 50 V Coding positions Rated current: min. 6 µa 6 µa 6 µa max..5 A*.5 A*.5 A* Contact resistance approx. 5 mω* approx. 5 mω* approx. 5 mω* Temperature range -55 C C (max. 0 Sec. to +50 C) -55 C C (max. 0 Sec. to +50 C) -55 C C (max. 0 Sec. to +50 C) Insulation resistance 5 x 0 MΩ 5 x 0 MΩ 5 x 0 MΩ Test voltage 500 V eff, 50 Hz 500 V eff, 50 Hz 500 V eff, 50 Hz EMP-shielding approx. 60 db 70 db 70 db Sealing mated and unmated IP 68* 3 0.4bar, hours at 5 C IP 68* bar, 48hours at 5 C IP 68* bar, 48hours at 5 C Mechanical life 5000 Contact couplings 5000 Contact couplings 5000 Contact couplings Shell: Materials, Finish, Colours Plug: Materials Stainless steel Aluminium alloy / Aluminium alloy / Stainless steel Stainless steel Finish Cr3 + Ni3 + Cd6 + cf / Cr3 + Ni3 + Cd6 + cf / Cr3 + Colours Black Olive (RAL605) / Black Olive (RAL605) / Black Receptacle: Materials Stainless steel Stainless, non magnetic steelstainless, non magnetic steel Finish Cr3 + Cr3 + Cr3 + Colours Black Black Black Contact inserts Thermoplastic / Duroplast Thermoplastic / Duroplast Thermoplastic / Duroplast Sealing elements Silicone elastomer / Fluor-silicone elastomer Silicone elastomer / Fluor-silicone elastomer Silicone elastomer / Fluor-silicone elastomer Contact type: Plug Rigid contacts Rigid contacts Rigid contacts Receptacle Spring contacts Spring contacts Spring contacts Material: Crimp-type copper wrought alloy Finish / Layer in micrometer Gold Gold Gold Cu:, Ni:, Au: 4±0,5 Cu:, Ni:, Au: 4±0,5 Cu:, Ni:, Au: 4±0,5 * for any two contacts * required: 0 mω (VG / VG 9535) *3 according to VG 9539-, Test-No Competence of Schaltbau At the beginning of the seventies Schaltbau developed the 7-pole connector NF07. It was standardized as VG In 98 the procurement authorities of the German armed forces (BWB) placed an order to develop a 0-pole connector. It was standardized as VG Schaltbau has been continuously enhancing the series NF07 and NF0. Presently approx. type variants of NF07 and 34 variants of NF0 are available (not including coding positions). Variants with attenuation values exceeding 80dB and completely non magnetic types are being manufactured. Standards Series NF 07: 7-pole standard connector: VG 9535 fulfills requiremens regarding test and approval. 7-pole connector, suitable for shielding: Test according to VG Series NF 0: 0-pole connector, suitable for shielding: VG fulfills requirements regarding test and approval. Note: According to IEC 6984 connectors are devices which must not be engaged or disengaged in normal use when live or under load.

4 4 Shell part Shell part Protection cap NF07 Standard, Page Gasket Z NF07 Standard, Page 9 Flange receptacle NF07 Standard, Page Sealing ring Z NF07 Standard, Page 9 Receptacle for single hole mounting NF07 Standard, Page 3 Protection cap Z7 NF07 Standard, Page Backend fitting Z5 with thread PG7 NF07 Standard, Page 9 Cable connecting receptacle for backend fitting Z5 Pg7 NF07 Standard, Page Straight heatshrink backend fitting NF07 Standard, Page 0 Cable connecting receptacle NF07 Standard, Page 0 Receptacle with thread PG9 NF07 Standard, Page Protection cap Z4 NF07 Standard, Page 0 Cable connecting receptacle (rubber sleeve) SURVEY RECEPTACLE Shell part Shell part Protection cap NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Gasket Z NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Sealing ring Z NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Straight heatshrink backend fitting NF07 for Shielding, Page 8 NF0 for Shielding, Page 8 Flange receptacle NF07 for Shielding, Page 8 NF0 for Shielding, Page 8 Receptacle for single hole mounting NF07 for Shielding, Page 8 NF0 for Shielding, Page 8 Cable connecting receptacle (short adapter) NF07 for Shielding, Page 9 NF0 for Shielding, Page 9 Cable connecting receptacle (long adapter) NF07 for Shielding, Page 9 NF0 for Shielding, Page 9 Reinforced cable connecting receptacle (short adapter) NF07 for Shielding, Page 9 NF0 for Shielding, Page 9 Reinforced cable connecting receptacle (long adapter) NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Reinforced cable connecting receptacle (rubber sleeve) NF07 for Shielding, Page Protection cap Z7 NF0 for Shielding, Page 3 Protection cap Z8 NF07 for Shielding, Page NF0 for Shielding, Page 3 Protection cap Z4

5 5 Protection cap Shell part Shell part NF07 Standard, Page Protection cap Z3 NF07 Standard, Page Dummy receptacle Z6 NF07 Standard, Page 7 90 Cable connecting plug NF07 Standard, Page 7 Cable connecting plug for backend fitting Z5 Pg7 NF07 Standard, Page 7 Cable connecting plug (short adapter) NF07 Standard, Page 8 Plug NF07 Standard, Page 8 Plug for single hole mounting NF07 Standard, Page Backend fitting Z5 with thread PG7 NF07 Standard, Page Straight heatshrink backend fitting SURVEY PLUG NF07 Standard, Page 8 Cable connecting plug (rubber sleeve) Protection cap Shell part Shell part NF07 for Shielding, Page 6 NF0 for Shielding, Page 6 90 Cable connecting plug NF07 for Shielding, Page NF0 for Shielding, Page 3 Protection cap Z3 NF07 for Shielding, Page 6 NF0 for Shielding, Page 6 Cable connecting plug (short adapter) NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Straight heatshrink backend fitting NF07 for Shielding, Page 6 NF0 for Shielding, Page 6 Cable connecting plug (long adapter) NF07 for Shielding, Page 7 NF0 for Shielding, Page 7 Plug for single hole mounting NF07 for Shielding, Page NF0 for Shielding, Page 3 Dummy receptacle Z6 NF07 for Shielding, Page 7 NF0 for Shielding, Page 7 Flange plug NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Gasket Z NF07 for Shielding, Page 0 NF0 for Shielding, Page 30 Sealing ring Z NF07 for Shielding, Page 7 NF0 for Shielding, Page 7 Cable connecting plug (rubber sleeve)

6 6 Ordering Information Our NF connector system has a modular structure. Consequently, there are many variation possibilities. You would find the exact ordering code for all variants listed in a chart relating to the corresponding device outline. We make a difference between an ordering code for our NF series connectors and a separate one for accessories. Customized / special designs: Shielded protection caps, short-cut terminations and further designs upon request. Note: Because of the many different combinations the available variants are listed in a chart next to the corresponding device outline. for all connector series: Series Example: NF 0 A L0 xx No. of poles (7-0) Shell (A-B-C-D-E-F-H-J-K-M-N) NF07 Standard: Description starting on page 7 NF07 for shielding: Description starting on page 6 NF0 for shielding: Description starting on page 6 Bayonet latch positions ( ) NF07 Standard: Description on page 3 NF07 for shielding: Description on page NF0 for shielding: Description on page 3 Terminal styles (L0-L-L) NF07 Standard: Description on page 3 NF07 for shielding: Description on page NF0 for shielding: Description on page 3 Special- / Customized designs (beyond VG96934/VG9535) for accessories: Example: Type of accessory (Z, Z, Z3, Z4, Z5, Z6, Z7, Z8, Z0) NF07 Standard: Description starting on page NF07 for shielding: Description starting on page NF0 for shielding: Description starting on page 3 Bayonet latch positions ( ) NF07 Standard: Description on page 3 NF07 for shielding: Description on page NF0 for shielding: Description on page 3 NF07 Z8/xx Note: For some connectors minimium order quantities may apply.

7 7 NF07 Standard 90 Cable connecting plug (upon request) Shell Part.3 Example* : NF 07 A L0 A A L0 A7 NF 07 A L0 A7 A 3 L0 A7 * Customized design upon request / See also ordering information on page 6 max. cable diameter 0 Ø6 NF07 Standard Cable connecting plug for backend fitting NF07 Z5 Pg7 Shell Part 9 Example* : NF 07 A L0 A Ø7.5 M4x A L0 A NF 07 A L0 A A 3 L0 A 39 Backend fitting NF07 Z5 Pg7on page Terminal styles on page 3 NF07 Standard Cable connecting plug (short adapter) Shell Part Ø.5 Ø6.5 Example* : NF 07 A L0 A A L0 A Ø7.5 Ø6 NF 07 A L0 A A 3 L0 A max. cable diameter 5 Terminal styles on page 3

8 8 NF07 Standard Plug for heatshrink backend fitting Shell Part 9.5 Example* : NF 07 A L0 ---* A L0 ---* Ø7.5 Ø.5 Ø4 NF 07 A L0 ---* A 3 L0 ---* Ø6 * Customized designs upon request Terminal styles on page 3 NF07 Standard Plug for single hole mounting Shell Part 0 Example* : NF 07 A L A6 A L A6 Ø7.5 M4x Ø6 NF 07 A L A6 A 3 L A6 Ø.5 (L) Terminal styles on page 3 NF07 Standard Cable connecting plug (rubber sleeve) Shell Part 5 ~~96 Example* : NF 07 A L0 A5 Ø7.5 Ø5...7 A L0 A5 NF 07 A L0 A5 A 3 L0 A5 cable diameter

9 9 NF07 Standard Flange receptacle Shell Part 3.5 Example* : NF 07 B L0 ---* 3 5 Ø.6 Ø.3 B L0 ---* NF 07 B L0 ---* B 3 L0 ---* B L ---* NF 07 B L ---* B 3 L ---* L0 =4. L =5. * Customized designs upon request Terminal styles on page 3 NF07 Standard Receptacle for single hole mounting Shell Part Sealing Example* : NF 07 C L0 ---* M4x Ø.6 L0 =4. C L0 ---* NF 07 C L0 ---* C 3 L0 ---* C L ---* NF 07 C L ---* C 3 L ---* L = 5. * Customized designs upon request Terminal styles on page 3 NF07 Standard Cable connecting receptacle for backend fitting NF07 Z5 Pg7 Shell Part 5 5 Example* : NF 07 D L0 D3 D L0 D3 Ø7.5 Ø.6 M4x NF 07 D L0 D3 D 3 L0 D3 4. Backend fitting NF07 Z5 Pg7 on page Terminal styles on page 3

10 0 NF 07 Standard Cable connecting receptacle (for heatshrink backend fitting) Shell Part 5 5 Example* : NF 07 D L0 ---* D L0 ---* Ø7.5 Ø.6 Ø3 Ø4 NF 07 D L0 ---* D 3 L0 ---* 4. * Customized designs upon request Terminal styles on page 3 NF 07 Standard Receptacle with thread PG 9 Shell Part 4 4 Example* : NF 07 H L0 ---* Sealing H L0 ---* Ø8 Ø.6 Pg9 NF 07 H L0 ---* H 3 L0 ---* 4. * Customized designs upon request Terminal styles on page 3 NF 07 Standard Cable connecting receptacle (Rubber sleeve) Shell Part 5 5 Example* : NF 07 D L0 D6 Ø7.5 Ø.6 Ø5...7 D L0 D6 NF 07 D L0 D6 D 3 L0 D6 ~~ 55.5 ~~ 0 cable diameter

11 NF07 Standard Backend fitting NF07 Z5 with thread PG7 Accessories / Shell Part 4. 4 Example* : NF07 Z5 Pg7 Ø7 M4x Ø8 Pg7 Backend fitting NF07 Z5 with thread PG7 For use with commercially available screw coupling built to DIN NF07 Standard Heatshrink backend fitting Accessoriers / Shell Part Heatshrink backend fitting, straight Example* : 03W -30 Heatshrink backend fitting, straight 03W -30 NF07 Standard Sealings VG9535 Z and VG96934 Z Accessories / Shell Part Gasket VG9535 Z (Flange seal) Sealing ring VG96934 Z (O-ring) Example* : VG9535 Z Gasket VG9535 Z Sealing ring VG96934 Z

12 NF07 Standard Protection cap VG96934 Z3 Accessories / Protection cap 5.5 Example* : VG96934 Z3 Ø.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z3 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 Standard Protection cap VG96934 Z4 (rubber) Accessories / Protection cap Example* : VG96934 Z4 Ø9.5 Ø5.6.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z4 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 Standard Dummy receptacle VG96934 Z6 Accessories / Protection cap 5.5 Example* : VG96934 Z6 Ø.5 Ø4. Dummy receptacle VG96934 Z6 Dummy receptacle to be mounted onto the case of a device for receiving a free plug cable

13 3 NF07 Standard Protection cap NF07 Z7/x Accessories / Protection cap Designation / Ordering Ordering example* : NF07 Z7 / Ø7.5. m /AWG3 5. m /AWG3 Protec- tion cap NF07 Z7 3 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 Standard Terminal styles, Mounting tool VG96934 Z0 Accessories Terminal style L0: Mounting tool VG96934 Z0 : VG96934 Z0 Mounting tool VG96934 Z0 Terminal style L: Note: Terminals must not be subjected to force or stress. Tool for single hole mounting of plugs and receptacle series: NF07 Standard NF07 for Shielding NF0 for Shielding Note: Max. Torque 8 + Nm Mounting tool VG96934 Z0 NF07 Standard Contact arrangement, Bayonet latch positions Contact arrangement Bayonet latch positions Plug Receptacle Bayonet latch positions Codes Series NF07 Standard Code α α Colour 90 0 red yellow green Note: Planforms seen from connector face.

14 4 NF07 Standard Mounting borings Flange receptacles Panel drilling for flange receptacles with gasket VG9535 Z M3 / Ø3.5 M3 (Section) (Section) Ø3.5 5 Ø.4 Ø.4 Panel drilling for flange receptacles with sealing ring VG96934 Z M3 / Ø3.5 M3 (Section) Ø3.5 (Section) 5 Ø5.8 Ø.4 Ø5.8 Ø.4 Receptacles for single hole mounting Panel drilling for single hole mounting of receptacles.5.5 Nut Washer Wall Ø4. Note: Use mounting tool VG96934 Z0 Max. torque Nm Printed circuit board terminal Panel drilling for plugs Panel drilling for receptacles Note: These mounting borings can also be used for shielded NF07 receptacles.

15 5 NF07 Standard Assembly and installation dimensions Plug (short adapter) Receptacle for single hole mounting 9 max. 6.5±0.7 L0 6 max. 7.5±0.7 L Plug for heatshrink backend fitting Receptacle for single hole mounting max. 6.5±0.7 L0 6 max. 7.5±0.7 L Plug (short adapter) Flange receptacle 9 9.5±0.7 L0 3 max. 0.5±0.7 L Receptacle for heatshrink backend fitting for single hole mounting Plug L0 6min L

16 6 NF07 for Shielding 90 Cable connecting plug (upon request) Shell Part.3 Example* : NF 07 A L0 A7/S A L0 A7/S NF 07 A L0 A7/S A 3 L0 A7/S A 4 L0 A7/S * Customized design upon request / See also ordering information on page 6 0 max. cable diameter Ø6 NF07 for Shielding Cable connecting plug (short adapter) Shell Part Example* : NF 07 A L0 A/S 30.5 max. Ø Ø.5 Ø6.5 Ø6 NF 07 A L0 A/S A L0 A/S A 3 L0 A/S A 4 L0 A/S max. cable diameter 5 NF07 for Shielding Cable connecting plug (long adapter) Shell Part 0 Ø.5 Example* : NF 07 A L0 /S Ø9 J L0 /S Ø7.5 Ø6 NF 07 J L0 /S J 3 L0 /S J 4 L0 /S 4.5 max. cable diameter 36.5 max.

17 7 NF07 for Shielding Plug for single hole mounting Shell Part 0 Example* : NF 07 E L0 Ø7.5 Ø.5 M4x Ø6 NF 07 NF 07 E L0 /S E L0 /S E 3 L0 /S E 4 L0 /S E L /S E L /S E 3 L /S E 4 L /S 0.6 (L) (L0) Terminal styles on page NF07 for Shielding Flange plug Shell Part.5.5 Example* : NF 07 A L Ø7.5 Ø NF 07 NF 07 F L0 /S F L0 /S F 3 L0 /S F 4 L0 /S F L /S F L /S F 3 L /S F 4 L /S 0.6 (L) (L0) Terminal styles on page NF07 for Shielding Cable connecting plug (rubber sleeve) Shell Part 5 ~~96 Example* : NF 07 L L0 Ø7.5 Ø5...7 NF 07 L L0 /S L L0 /S L 3 L0 /S cable diameter L 4 L0 /S

18 8 NF07 for Shielding Flange receptacle Shell Part 3.5 Example* : NF 07 B L0 /S 3 5 Ø.6 L0 =.5 L = 3.5 L = 7.5 Ø.3 NF 07 NF 07 NF 07 B L0 /S B L0 /S B 3 L0 /S B 4 L0 /S B L /S B L /S B 3 L /S B 4 L /S B L /S B L /S B 3 L /S B 4 L /S Terminal styles on page NF07 for Shielding Receptacle for single hole mounting Shell Part Sealing Example* : NF 07 C L0 /S M4x0.75 Ø.6 L0 =.5 L = 3.5 L = 7.5 Terminal styles on page NF 07 NF 07 NF 07 C L0 /S C L0 /S C 3 L0 /S C 4 L0 /S C L /S C L /S C 3 L /S C 4 L /S C L /S C L /S C 3 L /S C 4 L /S NF07 for Shielding Cable connecting receptacle (short adapter) Shell Part 33 max..5 8 Ø3 Ø6.5 Example* : NF 07 D L0 /S D L0 /S Ø7.5 Ø.6 Ø6 NF 07 D L0 /S D 3 L0 /S D 4 L0 /S max. cable diameter 5

19 9 NF 07 for Shielding Cable connecting receptacle (long adapter) Shell Part Designation / Ordering.5 Ordering example* : NF 07 D L0 D7/S Ø9 D L0 D7/S Ø7.5 Ø.6 6 NF 07 D L0 D7/S D 3 L0 D7/S D 4 L0 D7/S 39.5 max. 4.5 max. cable diameter NF 07 for Shielding Reinforced cable connecting receptacle (short adapter) Shell Part Designation / Ordering.5 8 Ø3. Ordering example* : NF 07 N L0 /S Ø6.5 N L0 /S Ø Ø6 NF 07 N L0 /S N 3 L0 /S N 4 L0 /S 5 33 max. cable diameter NF 07 for Shielding Reinforced cable connecting receptacle (long adapter) Shell Part Designation / Ordering.5 Ø3. Ordering example* : NF 07 K L0 /S Ø9 K L0 /S Ø Ø6 NF 07 K L0 /S K 3 L0 /S K 4 L0 /S 4.5 max. cable diameter 39.5 max.

20 0 NF07 for Shielding Reinforced cable connecting receptacle (rubber sleeve) Shell Part 55.5 ~~0 Example* : NF 07 M L0 /S Ø5...7 M L0 /S Ø NF 07 M L0 /S M 3 L0 /S cable diameter M 4 L0 /S NF07 for Shielding Heatshrink backend fitting Accessories / Shell Part Heatshrink backend fitting, straight Example* : 03W -30 Heatshrink backend fitting, straight 03W -30 NF07 for Shielding Sealings VG9535 Z and VG96934 Z Accessories / Shell Part Gasket VG9535 Z (Flange seal) Sealing ring VG96934 Z (O-ring) Example* : VG9535 Z Gasket VG9535 Z Sealing ring VG96934 Z

21 NF07 for Shielding Protection cap VG96934 Z3 Accessories / Protection cap 5.5 Example* : VG96934 Z3 Ø.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z3 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 for Shielding Protection cap VG96934 Z4 (rubber) Accessories / Protection cap Example* : VG96934 Z4 Ø9.5 Ø5.6.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z4 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 for Shielding Dummy receptacle VG96934 Z6 Accessories / Protection cap 5.5 Example* : VG96934 Z6 Ø.5 Ø4. Dummy receptacle VG96934 Z6 Dummy receptacle to be mounted onto the case of a device for receiving a free plug cable

22 NF07 for Shielding Protection cap NF07 Z7/x Accessories / Protection cap Example* : NF07 Z7 / Ø7.5. m /AWG3 5. m /AWG3 Protec- tion cap NF07 Z7 3 4 ~00 3. It is possible to fit loops or ring terminals (both included). NF07 for Shielding Terminal styles, Mounting tool VG96934 Z0 Accessories Terminal style L0: Mounting tool VG96934 Z0 : VG96934 Z0 Terminal style L: Terminal style L: Mounting tool VG96934 Z0 Tool for single hole mounting of plugs and receptacles series: NF 07 Standard NF 07 for Shielding NF 0 for Shielding Mounting tool VG96934 Z0 Note: Terminals must not be subjected to force or stress. Note: Max. Torque 8 + Nm NF07 for Shielding Contact arrangement, Bayonet latch positions Contact arrangement Bayonet latch positions Plug Receptacle Bayonet latch positions Codes Series NF07 for Shielding Code α α Colour 90 0 red yellow green pink Note: Planforms seen from connector face.

23 3 NF07 for Shielding Mounting borings Flange receptacles Panel drilling for flange receptacles with gasket VG9535 Z M3 / Ø3.5 M3 (Section) (Section) Ø3.5 5 Ø.4 Ø.4 Panel drilling for flange receptacles with sealing VG96934 Z M3 / Ø3.5 M3 (Section) Ø3.5 (Section) 5 Ø5.8 Ø.4 Ø5.8 Ø Receptacles for single hole mounting Panel drilling for single hole mounting of receptacles Nut Washer Wall Ø4. Note: Use mounting tool VG96934 Z0 Max. torque Nm Printed circuit board terminal Panel drilling for plugs Panel drilling for receptacles Note: These mounting borings can also be used for NF07 Standard receptacles.

24 4 NF07 for Shielding Assembly and installation dimensions Cable connecting plug (short adapter) Receptacle for single hole mounting max. 6.5±0.7 L0 6 max. 7.5±0.7 L L Cable connecting plug (long adapter) Receptacle for single hole mounting max. 6.5±0.7 L0 6 max. 7.5±0.7 L L Cable connecting plug (short adapter) Flange receptacle ±0.7 L max. 0.5±0.7 L L Cable connecting plug Flange receptacle ±0.7 L0 3 max. 0.5±0.7 L L Cable connecting plug (short adapter) Reinforced cable connecting receptacle (long adapter)

25 5 NF07 for Shielding Assembly and installation dimensions Reinforced cable connecting receptacle (short adapter) Plug for single hole mounting min L L Reinforced cable connecting receptacle (long adapter) Plug for single hole mounting min L L Reinforced cable connecting receptacle (short adapter) Flange plug L L Reinforced cable connecting receptacle (long adapter) Flange plug L L

26 6 NF0 for Shielding 90 Cable connecting plug Shell Part.3 Example* : NF 0 A L0 A A L0 A7 A L0 A7 NF 0 A 3 L0 A7 A 4 L0 A7 A 5 L0 A7 0 max. cable diameter Ø6 NF0 for Shielding Cable connecting plug (short adapter) Shell Part Example* : NF 0 A L0 ---* 30.5 max. 0 8 Ø.5 Ø6.5 A L0 ---* A L0 ---* Ø7.5 Ø6 NF 0 A 3 L0 ---* A 4 L0 ---* A 5 L0 ---* max. cable diameter 5 * Customized designs upon request NF0 for Shielding Cable connecting plug (long adapter) Shell Part 0 Ø.5 Example* : NF 0 A L0 A7 Ø9 A L0 A7 Ø7.5 Ø6 A L0 A7 NF 0 A 3 L0 A7 A 4 L0 A max. max. cable diameter A 5 L0 A7

27 7 NF0 for Shielding Plug for single hole mounting Shell Part 0 Example* : NF 0 E L0 ---* Ø7.5 M4x Ø6 E L0 ---* E L0 ---* NF 0 E 3 L0 ---* E 4 L0 ---* E 5 L0 ---* Ø (L) (L0) Terminal styles on page 3 * Customized designs upon request E L ---* E L ---* NF 0 E 3 L ---* E 4 L ---* E 5 L ---* NF0 for Shielding Flange plug Shell Part.5.5 Example* : NF 0 F L0 ---* Ø7.5 Ø F L0 ---* F L0 ---* NF 0 F 3 L0 ---* F 4 L0 ---* F 5 L0 ---* 0.6 (L) (L0) Terminal styles on page 3 * Customized designs upon request F L ---* F L ---* NF 0 F 3 L ---* F 4 L ---* F 5 L ---* NF0 for Shielding Cable connecting plug (rubber sleeve) Shell Part 5 ~~96 Example* : NF 0 A L0 A5 Ø7.5 Ø5...7 A L0 A5 A L0 A5 NF 0 A 3 L0 A5 cable diameter A 4 L0 A5 A 5 L0 A5

28 8 NF0 for Shielding Flange receptacle Shell Part 3 Example* : NF 0 B L0 ---* Ø3.03 L0 =.5 L =3.5 L = 7.5 Ø.3 NF 0 B L0 ---* B L0 ---* B 3 L0 ---* B 4 L0 ---* B 5 L0 ---* NF 0 B L ---* B L ---* B 3 L ---* B 4 L ---* B 5 L ---* NF 0 B L ---* B L ---* B 3 L ---* B 4 L ---* B 5 L ---* Terminal styles on page 3 * Customized designs upon request NF0 for Shielding Receptacle for single hole mounting Shell Part 6 Example* : NF 0 C L0 ---* 0.5 Sealing M4x0.75 Ø3.06 L0 =.5 L = 3.5 L = 7.5 Terminal styles on page 3 * Customized designs upon request NF 0 C L0 ---* C L0 ---* C 3 L0 ---* C 4 L0 ---* C 5 L0 ---* NF 0 C L ---* C L ---* C 3 L ---* C 4 L ---* C 5 L ---* NF 0 C L ---* C L ---* C 3 L ---* C 4 L ---* C 5 L ---* NF0 for Shielding Cable connecting receptacle (short adapter) Shell Part 33 max..5 8 Example* : NF 0 D L0 ---* Ø3 Ø6.5 D L0 ---* Ø7.5 Ø3.03 Ø6 D L0 ---* NF 0 D 3 L0 ---* D 4 L0 ---* max. cable diameter 5 * Customized design upon request D 5 L0 ---*

29 9 NF0 for Shielding Cable connecting receptacle (long adapter) Shell Part.5 Example* : NF 0 D L0 D7 Ø9 D L0 D7 Ø7.5 Ø D L0 D7 NF 0 D 3 L0 D7 D 4 L0 D max. 4.5 D 5 L0 D7 max. cable diameter NF0 for Shielding Reinforced cable connecting receptacle (short adapter) Shell Part.5 8 Ø3. Example* : NF 0 N L0 ---* Ø6.5 N L0 ---* N L0 ---* Ø Ø6 NF 0 N 3 L0 ---* N 4 L0 ---* N 5 L0 ---* 33 5 * Customized design upon request max. cable diameter NF0 for Shielding Reinforced cable connecting receptacle (long adapter) Shell Part.5 Ø3. Example* : NF 07 K L0 ---* Ø9 K L0 ---* K L0 ---* Ø Ø6 NF 0 K 3 L0 ---* K 4 L0 ---* K 5 L0 ---* max. cable diameter 39.5 max. 4.5 * Customized design upon request

30 30 NF0 for Shielding Reinforced cable connecting receptacle (rubber sleeve) Shell Part 55.5 ~~0 Example* : NF 0 M L0 ---* Ø5...7 M L0 ---* Ø M L0 ---* NF 0 M 3 L0 ---* M 3 L0 ---* cable diameter M 4 L0 ---* * Customized designs upon request NF0 for Shielding Heatshrink backend fitting Accessories / Shell Part Heatshrink backend fitting, straight Example* : 03W -30 Heatshrink backend fitting, straight 03W -30 NF0 for Shielding Sealings VG9535 Z and VG96934 Z Accessories / Shell Part Gasket VG9535 Z (Flange seal) Sealing ring VG96934 Z (O-ring) Example* : VG9535 Z Gasket VG9535 Z Sealing ring VG96934 Z

31 3 NF0 for Shielding Protection cap VG96934 Z3 Accessories / Protection cap 5.5 Example* : VG96934 Z3 Ø.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z3 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF0 for Shielding Protection cap VG96934 Z4 (rubber) Accessories / Protection cap Example* : VG96934 Z4 Ø9.5 Ø5.6.5 ring.5m AWG3. m /AWG3 Protection cap VG96934 Z4 5 ~00 3. It is possible to fit loops or ring terminals (both included). NF0 for Shielding Dummy receptacle VG96934 Z6 Accessories / Protection cap 5.5 Example* : VG96934 Z6 Ø.5 Ø4. Dummy receptacle VG96934 Z6 Dummy receptacle to be mounted onto the case of a device for receiving a free plug cable

32 3 NF0 for Shielding Protection cap NF0 Z8/x Accessories / Protection cap Example* : NF0 Z8 / Ø7.5. m /AWG3 5. m /AWG3 Protec- tion cap 3 NF0 Z8 4 ~ It is possible to fit loops or ring terminals (both included). NF0 for Shielding Terminal styles, Mounting tool VG96934 Z0 Accessories Terminal style L0: Mounting tool VG96934 Z0 : VG96934 Z0 Terminal style L: Ø mm / AWG Mounting tool VG96934 Z0 Tool for single hole mounting of plugs and receptacles series: Mounting tool VG96934 Z0 Terminal style L: Ø NF 07 Standard NF 07 for Shielding NF 0 for Shielding Note: Terminals must not be subjected to force or stress. Note: Max. Torque 8 + Nm NF0 for Shielding Contact arrangement, Bayonet latch positions Contact arrangement Bayonet latch positions Plug Receptacle Bayonet latch positions Codes Series NF0 for Shielding Code α α Colour white 85 5 blue violet chrome yellow dark red Note: Planforms seen from connector face.

33 33 NF0 for Shielding Mounting borings Flange receptacles Panel drilling for flange receptacles with gasket VG9535 Z M3 / Ø3.5 M3 (Section) (Section) Ø3.5 5 Ø.4 Ø.4 Panel drilling for flange receptacles with sealing VG96934 Z M3 / Ø3.5 M3 (Section) Ø3.5 (Section) 5 Ø5.8 Ø.4 Ø5.8 Ø Receptacles for single hole mounting Panel drilling for single hole mounting of receptacles Nut Washer Wall Ø4. Note: Use mounting tool VG96934 Z0 Max. torque Nm Printed circuit board terminal Panel drilling for plugs Panel drilling for receptacles

34 34 NF0 for Shielding Assembly and installation dimensions Cable connecting plug (short adapter) Receptacle for single hole mounting max. 6.5±0.7 L0 6 max. 7.5±0.7 L L Cable connecting plug (long adapter) Receptacle for single hole mounting max. 6.5±0.7 L0 6 max. 7.5±0.7 L L Cable connecting plug (short adapter) Flange receptacle ±0.7 L0 3 max. 0.5±0.7 L L Cable connecting plug Flange receptacle ±0.7 L0 3 max. 0.5±0.7 L L Cable connecting plug (short adapter) Reinforced cable connecting receptacle (long adapter)

35 35 NF0 for Shielding Assembly and installation dimensions Reinforced cable connecting receptacle (short adapter) Plug for single hole mounting min L L Reinforced cable connecting receptacle (long adapter) Plug for single hole mounting min L L Reinforced cable connecting receptacle (short adapter) Flange plug L L Reinforced cable connecting receptacle (long adapter) Flange plug L L

36 36 Recommendation for the cabling of connector (short / long adapter) Styles A, D, J, K and N with cable according to VG Not mentioned details are to be chosen appropriately. The lock nut () and the connector backshell () are to be loosened from the connector (6). Slide lock nut () heatshrink backend fitting (4) and if used sleeve (3) for fixing the protective cap on the cable. Remove jacket from cable end of the cable (7) approx. 8+ mm with cable stripper. Fold back screen meshing (5). If existing, open and cut off foil type shielding with slitting tool (knife or similar). Strip approx. 3 mm and tin single wires. Use thermal stripping device. Shorten traction relief rope (6) to indicated dimensions - mm with crimp ring eyelet (7). If existing: Insulate the single wire screen meshing (8) of the shielded single wire (9) with small PTFE tape and if required gather them and crimp them together with an insulated single wire on the appropriate contact. Note: Prior to the form fit extrusion-coating of the connector, the connector backshell shall be potted. If the connector backshell shall not be potted: Slide shrinkable tubings (0) diameter.6 mm to.4 mm, approx. 7 mm long - over single wires or insulate with small PTFE tape. Note: For easier working, clamp connector in an appropriate fixture and fix cable in suitable holder.

37 37 Solder single wires on the contacts with filament type extra thin tin solder L Sn 60, diameter mm with acid free flux core. Temperature stabilized soldering iron with a tip diameter of approx. mm. Soldering temperature max. 30 C; soldering time max. 4 seconds. Slide insulating tubing (0) over solder cups (and shrink fit them) Apply on threads () of plug conductive adhesive (only on first thread) and screw on connector backshell (). Tighten sturdily with pliers covered with plastic or rubber. Slide cable in connector backshell () so that strain relief split pin () can be slid through bore holes (3) in connector backshell () and cable eye or ring eyelet (7). The ring eyelet should be on the inner curve at the angular connector backshell to avoid compressive load of the single wires at tensile load. Bend the screen meshing (5) braiding back over the connector backshell (4), and cut off in front of the thread. In case of connector backshells with long adapter (4a), the screen meshing (5) bead has to be fixed by additional wire (5a). Apply conductive adhesive on thread (only on first thread). Screw on clamp nut () on plug endshell and tighten sturdily with pliers. Intermediate checking: Check wired contacts in conformity with wired diagram, insulation resistance and dielectric strength according to VG , Test-No. 5. and 5.3. If the connector shall not be form fit extrusion-coated: Mounting of shrinkable connector backshell (4) according to VG

38 38 Note: In order to achieve the thightness IP 67 mentioned in the data sheet, the heatshrink backend fitting has to be glued to the parts marked in red in the opposite drawing. Schaltbau recommends to use adhesives made by manufacturers of the special heatshrink backend fitting. Final checking: Insulation resistance and dielectric strength according to VG , Test-No. 5. and 5.3. Fixing of the protective cap on cable: Place fixing cord (5) of protective cap in a loop around the cable. Shrink fit tubing (3). Recommendation for the cabling of 90 cable connecting plug Slide pressure screw (5) and strain relief (4) on cable before screen end. Slide screen cone (3) between single wire and screen meshing. Press strain relief (4) over screen cone (3) with screen meshing from below. The screen meshing is now between strain relief (4) and screen cone (3). Cut off projecting parts of the screen meshing. Insert premounted cable into housing (). Knot strain relief rope around the strain relief split pin (). Note: An effective strain relief can only be achieved by a permanently and tightly knotted strain relief rope. For further assembly steps (insulate, tin, solder and insulate single wires) and test please refer to prior chapter.

39 39 SF07 and SF0 Filtered connectors Connectors series NF07 and NF0 were specially designed for application in modern telecommunication engineering. In case an additional protection against electromagnetic disturbance is desired, we recommend our shielded and filtered connectors of series NF07 and NF0. Please inquire for customized designs. More and more highly efficient electronic systems co-operate on limited space. The protection against electromagnetic influence increasingly requires EMC-suitable interfaces. Shielded and filtered connectors help to protect the whole system against undesirable electromagnetic disturbance. Our solutions allow to avoid malfunctions and direct or indirect economic losses such as: Malfunctions of peripheral electronics Destruction of modules Machine standstills. For this purpose the SF concept offers filter systems in Planar technique: Modular technique: Tubular technique: C-filter C-filter π-filter C-filter π-filter RFI-filter Please do not hesitate to request detailed information.

40 40 Electrical Components and Systems for Railway Engineering and Industrial Applications Connectors Connectors manufactured to industry standards Connectors to suit the special requirements of telecommunications engineering (MIL connectors) Charging connectors for battery-powered machines and systems Connectors for railway engineering, including UIC connectors Special connectors to suit customer requirements Snap Action Switches Snap-action switches with positive opening operation Snap-action switches with self-cleaning contacts Enabling switches Special switches to suit customer requirements Contactors Single and multi-pole DC contactors High-voltage AC/DC contactors Contactors for battery powered vehicles and power supplies Contactors for railway applications Single terminal clamps and fuse holders DC emergency break switches Special contactors to suit customer requirements Control Devices Master controllers and reversers for railway applications Toggle switch devices Handles and foot switches for railway applications (dead-man equipment) Switching elements with high breaking capacity Emergency brake handles Signal devices Transportation Power supplies for passenger coaches (electric equipment) Battery chargers for locomotives and passenger coaches High-voltage equipment for single and multi-phase operation Heating devices and heating controls Design and engineering services for high-voltage equipment Special equipment to suit customer requirements Schaltbau GmbH Klausenburger Strasse Munich Germany Phone Fax contact@schaltbau.de Internet A689/0306/.5 Printed in Germany with compliments: We reserve the right to make technical changes without prior notice. Issued June 003

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003 Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature

More information

Connect - Contact - Control. Brochure. l Connectors

Connect - Contact - Control. Brochure. l Connectors Connect - Contact - Control 1 Brochure l Connectors Connectors I Page 2 Page 3 I Connectors Reliable connections When climbing in the mountains strength and endurance play as important a role as communication

More information

Connect - Contact - Control. Fuses for high-voltage switchgear F-HS, F-VS Series Ø 60. F 185.en

Connect - Contact - Control. Fuses for high-voltage switchgear F-HS, F-VS Series Ø 60. F 185.en Connect - Contact - Control Fuses for high-voltage switchgear, F-VS 10 10 +0.3 60 7.5 0 F 185.en Fuses for high-voltage switchgear, and F-VS For the protection of high-voltage switchgear Schaltbau offers

More information

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................

More information

General characteristics and technical data Series MCS

General characteristics and technical data Series MCS MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and

More information

Connectors. M Series Circular Modular Connectors Catalogue A10.en

Connectors. M Series Circular Modular Connectors Catalogue A10.en Connectors M Series Circular Modular Connectors Catalogue 0.en Circular modular connectors: M and M3 Series M and M3 Series universal industrial connectors are designed for safety and reliability also

More information

S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en

S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break

More information

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series

More information

Brochure Connectors. More information here: schaltbau-gmbh.com

Brochure Connectors. More information here: schaltbau-gmbh.com 1 Brochure Connectors More information here: schaltbau-gmbh.com WE PROVIDE RELIABLE CONNECTIONS Connectors must ensure reliable transmission of energy and signals coping with high voltages, harsh environments

More information

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series

More information

Connnectors. B Series Connectors for rail vehicles Catalogue F160.en. More information here: schaltbau-gmbh.com

Connnectors. B Series Connectors for rail vehicles Catalogue F160.en. More information here: schaltbau-gmbh.com onnnectors B Series onnectors for rail vehicles atalogue F0.en More information here: schaltbau-gmbh.com onnectors for rail vehicles, The connectors, series B, have been designed especially for the demanding

More information

Contactors. C110B/80, C110B/120 C110B/200, C110B/300 Single pole DC NO contactors for industrial trucks Catalogue B71.en

Contactors. C110B/80, C110B/120 C110B/200, C110B/300 Single pole DC NO contactors for industrial trucks Catalogue B71.en Contactors C110B/80, C110B/120 C110B/200, C110B/00 Single pole DC NO contactors for industrial trucks Catalogue B71.en 42 C110B Series DC NO contactors for battery voltages C110B Series contactors are

More information

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47. Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

Connect - Contact - Control. Connectors. High Power Connectors for industrial trucks Catalogue A84.en

Connect - Contact - Control. Connectors. High Power Connectors for industrial trucks Catalogue A84.en Connect - Contact - Control 1 LV-HPC Connectors Series High Power Connectors for industrial trucks Catalogue A84.en High Power Connectors LV-HPC Series More Power for Faster Charging With the new LV-HPC

More information

Contactors. CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en. Connect - Contact - Control

Contactors. CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en. Connect - Contact - Control Connect - Contact - Control 3 Contactors CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en More information at: schaltbau-gmbh.com 42 CH1130/02 Single pole high-voltage contactor

More information

SD, SE, SDE, SCO series Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches,

SD, SE, SDE, SCO series Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches, 4 Electrics for Rolling Stock Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches, Change-Over-Switches 600 V to 3 kv Catalogue F84.en

More information

Shell material Insulator Contacts Sealing Temperature Mating Protection

Shell material Insulator Contacts Sealing Temperature Mating Protection Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid

More information

EN3716 SAE AS81659 ARINC

EN3716 SAE AS81659 ARINC 6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

More information

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive

More information

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles... CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...

More information

SCE. Snatch Connector Electrical Series

SCE. Snatch Connector Electrical Series SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

More information

FISCHER FREEDOM TM SERIES

FISCHER FREEDOM TM SERIES K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

Luminus Series Amphenol Pcd

Luminus Series Amphenol Pcd Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located

More information

Installation Instructions (Translation) Marking. Description. Danger, warning and note symbols. Technical data. ANTARES ExtSet.

Installation Instructions (Translation) Marking. Description. Danger, warning and note symbols. Technical data. ANTARES ExtSet. Description Marking The ANTARES ExtSet makes it possible to distribute the Remote I/O ANTARES modules of an explosion-protected Remote I/O system ANTARES among a maximum of 4 metal mounting rails. For

More information

MIL-DTL 38999Series III Aluminium Series

MIL-DTL 38999Series III Aluminium Series MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI

More information

Electrical Test voltage (Vrms) Service sea level at m M I II

Electrical Test voltage (Vrms) Service sea level at m M I II 8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description

More information

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................

More information

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:

More information

Contactors. CL1115/02, CL1215/02, CL1315/02 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V Catalogue C25.en

Contactors. CL1115/02, CL1215/02, CL1315/02 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V Catalogue C25.en Connect - Contact - Control 3 Contactors CL1115/02, CL1215/02, CL1315/02 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V Catalogue C25.en 2 CL1115/02, CL1215/02, CL1315/02 1, 2 and 3

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among

More information

l Snap-Action Switches

l Snap-Action Switches Connect - Contact - Control 2 Brochure l Snap-Action Switches Snap-action switches I Page 2 Page 3 I Snap-action switches Double Safety A sky diver's life depends on his equipment. In case of emergency

More information

K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES

K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68

More information

CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V

CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...

More information

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708 FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to

More information

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or

More information

SMA CONTENTS PAGE 9-3

SMA CONTENTS PAGE 9-3 CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15

More information

8N45S NC Series Non-safety classified connectors for EPR reactors

8N45S NC Series Non-safety classified connectors for EPR reactors Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools 2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

HARTING. Interface Connectors. People Power Partnership

HARTING. Interface Connectors. People Power Partnership 11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs

More information

HBB power connector. Product description

HBB power connector. Product description HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and

More information

Connectors. LV Series High Power Connectors for faster charging of industrial trucks Catalogue A84.en. more information here: schaltbau-gmbh.

Connectors. LV Series High Power Connectors for faster charging of industrial trucks Catalogue A84.en. more information here: schaltbau-gmbh. 1 Connectors LV Series High Power Connectors for faster charging of industrial trucks Catalogue A84.en more information here: schaltbau-gmbh.com High Power Connectors LV Series More Power for Faster Charging

More information

SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS

SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of

More information

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications. AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........

More information

CONEC provides reliable and effective solutions to OEM, EMS and cable houses.

CONEC provides reliable and effective solutions to OEM, EMS and cable houses. CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable

More information

ODU DOCK. Connector System for application in Robot-Docking and Tool-Changing Systems for more than plugging cycles

ODU DOCK. Connector System for application in Robot-Docking and Tool-Changing Systems for more than plugging cycles Catalogue No.: 1014-b ODU DOCK Connector System for application in Robot-Docking and Tool-Changing Systems for more than 100.000 plugging cycles All dimensions in mm. All figures are illustrations or photos.

More information

SCHALTBAU CONNECTIONS ALL FROM ONE SOURCE

SCHALTBAU CONNECTIONS ALL FROM ONE SOURCE SCHALTBAU CONNECTIONS ALL FROM ONE SOURCE SCHALTBAU CONNECTIONS PRE-ASSEMBLED CONNECTORS Schaltbau connectors assembled as set Whether it is for railway vehicles, charging stations of modern li-ion batterypowered

More information

Connect - Contact - Control. Connectors. Series Circular Modular. Connectors. Manual A10-M.en

Connect - Contact - Control. Connectors. Series Circular Modular. Connectors. Manual A10-M.en Connect - Contact - Control M Connectors Series Circular Modular Connectors Manual A0-M.en Inhalt. Important Basic Information.... Legal Notes.... Conventions for this Installation and Maintenance Instructions....

More information

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

HBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com

HBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES

More information

Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229

Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8

More information

... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS

... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS ... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe

More information

K2 Qualified Connectors for EPR Reactor

K2 Qualified Connectors for EPR Reactor Reactor Class 1E connector with quick connect 1/4 turn bayonet coupling and shielding continuity designed to operate during normal & seismic conditions. K2 Qualified / RCC-E 2005 Compliant with EPR wiring

More information

Amphenol-Tuchel Electronics 44 Series

Amphenol-Tuchel Electronics 44 Series 44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.

More information

Integrated Backshell Fire Proof Connector

Integrated Backshell Fire Proof Connector 8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines

More information

Data sheet chainflex CF8821

Data sheet chainflex CF8821 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

EPIC CIRCON M23 Series

EPIC CIRCON M23 Series M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland

More information

38999 All In One! Series III Integrated Backshell

38999 All In One! Series III Integrated Backshell 38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell

More information

MMC RTX series EN3716

MMC RTX series EN3716 MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

More information

S870, S970 Series. Snap-action switches. Positive opening operation Self-cleaning contacts Catalogue D70.en

S870, S970 Series. Snap-action switches. Positive opening operation Self-cleaning contacts Catalogue D70.en Snap-action switches S870, S970 Series Snap-action switches Positive opening operation Self-cleaning contacts Catalogue D70.en Snap-action switches S870/S970 Series Single break SPDT switches with positive

More information

Compact Push-pull Circular Connector. JB5 Series. Plug

Compact Push-pull Circular Connector. JB5 Series. Plug COMPONENTS PRODUCT INFORMATION NEW Compact Push-pull Circular Connector JB5 Series CONNECTOR MB-0101-2 January 2004 Receptacle Plug The JB5 Series connectors are compact circular connectors

More information

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

Data sheet chainflex CF240

Data sheet chainflex CF240 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.

More information

38999 Series III Composite Connectors

38999 Series III Composite Connectors 8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

CA-COM Industrial Connectors

CA-COM Industrial Connectors CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial

More information

about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.

about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group. table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts

More information

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.

More information

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev ) MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL

More information

KVBS Reverse bayonet connectors for railway applications

KVBS Reverse bayonet connectors for railway applications Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and

More information

Amphenol SCE2/Terrapin Series

Amphenol SCE2/Terrapin Series APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR

More information

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw

More information

Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.

Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters. Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide

More information

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies 8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07

More information

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002 Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER

More information

Clearwater Tech - Phone: Fax: Web: -

Clearwater Tech - Phone: Fax: Web:  - Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One

More information

Crimpmate Range pitch 5.00

Crimpmate Range pitch 5.00 Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular

More information

06. har-mik INTERFACE CONNECTORS

06. har-mik INTERFACE CONNECTORS . INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,

More information

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd PEGASUS SERIES Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,

More information

SEK Solder board connectors

SEK Solder board connectors Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13

More information

Contactors. CT1115/04, CT1130/04 CT1215/04, CT1230/04 CT1315/04, CT1330/04 1, 2 and 3 pole power contactors for AC and DC Catalogue C20.

Contactors. CT1115/04, CT1130/04 CT1215/04, CT1230/04 CT1315/04, CT1330/04 1, 2 and 3 pole power contactors for AC and DC Catalogue C20. Connect - Contact - Control Contactors CT5/0, CT0/0 CT5/0, CT0/0 CT5/0, CT0/0, and pole power contactors for AC and DC Catalogue C0.en Power contactors for AC and DC, Series CT Owing to a new blowout technology,

More information

Multipole Low Voltage Connectors

Multipole Low Voltage Connectors Connectors 4 Introduction Key Features Wide range of body styles and sizes Unsealed, sealed or hermetic etic Signal or power Multipole up to 55 contacts Up to 30 A Standard or inverted polarity Solder,

More information

8T Series. MIL-DTL Series II

8T Series. MIL-DTL Series II Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09

More information

l Snap-Action Switches

l Snap-Action Switches Connect - Contact - Control 2 Brochure l Snap-Action Switches Snap-action switches I Page 2 Page 3 I Snap-action switches Double Safety A sky diver's life depends on his equipment. In case of emergency

More information

JUMO MIDAS Pressure transmitter

JUMO MIDAS Pressure transmitter Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids

More information

Data sheet chainflex CF6

Data sheet chainflex CF6 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture

More information

Molded & Mechanical Military Connectors (MIL-C-5015)

Molded & Mechanical Military Connectors (MIL-C-5015) Cord sets & CONNECTOR ASSEMBLIES / connectors Molded & Mechanical (MIL-C-5015) Abrasion Chemicals Flexing MIL-C-5015 VG 95 234 NATO Specification Operating Temperature Range -55 C to 125 C TPC s Circular

More information

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated

More information

AMPLIMITE* HDP- 20 and Economy

AMPLIMITE* HDP- 20 and Economy AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].

More information

2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8

2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8 2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel

More information

D-Sub Connectors. Catalog E /09 Edition 3

D-Sub Connectors.  Catalog E /09 Edition 3 www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2

More information

Surface thermocouple Model TC50

Surface thermocouple Model TC50 Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial

More information