KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features

Transcription

1 Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes the KJLs quick mating but also provides an audible and tactile click, along with visual verification of mated connectors via a sighting hole and highvisibility, bright blue painted bayonet pins. Shielded nterconnect KJL plugs feature high quality grounding springs that provide 360 degrees of E/RF shielding protection. These springs ground the barrel of the KJL plugs to the inside wall of the KJL receptacles with a wiping action that offers effective protection from reception or transmission of electronic noise. any Contact Layouts and Styles KJL connectors come in a wide variety of contact sizes and layouts up to 128 contacts. Printed circuit board, fiber optic, thermocouple, and coax style contacts are available for special applications. KJL L-DTL Series KJL L-DTL Series connectors offer high density contact arrangements in a miniature circular shell. Originally designed for the especially demanding requirements of today s high performance military and commercial aircraft, these connectors are finding their way into applications needing extremely reliable interconnections. KJL s features include, total environmental sealing, wide operating temperature range (-65 C to 200 C), quick mating three point bayonet coupling, 100% scoop proof shell design, E-RF shielding, and they are available in a rugged 500 hour salt spray plating. issiles Shipboard edical nstrumentation High Reliability Test Equipment Utilizes High-Quality ilitary Contacts For standard applications, KJLs come with crimp style military contacts design to resist bending and provide reliable performance under the most rigorous conditions. Corrosion Resistant KJLs are available with cadmium over nickel plating that has met and passed the 500 hour military salt spray corrosion tests. Full etal Contact Retention Clips TT Cannon s KJL connectors utilize full metal retention clips in their insulators (unlike some manufacturers that use plastic clips), which assures the highest level of serviceability and unparalleled contact retention. KJL L-DTL Series 163

2 KJL L-DTL Series Technical Specifications ATERALS & FNSHES Shell Bayonet Pins Plating Contacts Plating nsulator Grommet & Seals Aluminum alloy Passivated stainless steel per QQ-S-763 A-Clear Chromate over cadmium over electroless nickel per QQ-P-416 B-Olive drab chromate over cadmium over electroless nickel per QQ-P-416 F-Electroless nickel per QQ-N-290 (N - Commercial) Copper alloy Gold plated, 50 microinches per L-G type, grade C, class Hard plastic wafer which contains metal retention tines for high reliability retention of crimp contacts Silicone based elastomer Grounding Springs Beryllium copper ELECTRCAL DATA Operating Voltage (Vac rms) & Test Voltage (Unmated Condition) Current Rating by contact size and wire accommodation (Test Amps) Contact Resistance of mated contacts end to end Service Rating Test Voltages N Sea Level ,000 feet Wire Size 22D 22* 22* aximum Contact Size illivolt Drop 22D 73 22* 45 22* ECHANCAL Operating Temperature Sealing Wire Sealing Range A Plating -65 C to 150 C (-85 F to 302 F) B Plating -65 C to 175 C (-85 F to 347 F) F (N) Plating -65 C to 200 C (-85 F to 392 F) Against sand, dust per L-STD-202 & ice resistance Contact Size inimum inches aximum inches inimum mm aximum mm 22D * * * inactive for new designs

3 Technical Specifications nsulation Strip Length Contact Size Strip Length 22*, 22D or 22*.125 (3.18) (4.77) (4.77) (4.77) ating Life Salt Spray Heat Chemical Resistance Sine Vibration Random Vibration Shock E Shielding Effectiveness Contact Type Number of Circuits 3 to 128 Contact nsertion 500 cycles minimum Finish A: 48 hour per L-STD-1344A method 1001 condition B Finish B: 500 hour per L-STD 1344A method 1001 condition C Finish F: 48 hour per L-STD-1344A method 1001 condition B Finish A: 150 C (302 F) Finish B: 175 C (347 F) Finish F: 200 C (392 F) 1000 hours to L-STD-1344 method 1005 Lubricating oils, hydraulic fluids, coolants, deicing fluids per L-STD-1344A ethod 1016 condition a-1 30g at ambient temperature with simulated accessory load 49.5 grms at ambient temperatures 300g ±15% half sine wave magnitude for 3 ±1 milliseconds 100 Hz to 10 GHz - minimum attenuation of 50dB Crimp, fiber optic, coax, twinax, or printed circuit nsertion from rear of connector with simple plastic or high quality metal hand tool. Extraction from rear with simple plastic or high-quality metal hand tools. Contact Retention Per L-DTL tested to L-STD-1344A method 2007 Polarization Approvals * inactive for new designs Three point bayonet coupling, five keyways with optional master keyway rotations, note insert and four minor keyways remain fixed. L-DTL Cross Section Contact Axial load Newtons ±10% Axial load Pounds ±10% 22*, 22D, 22* KJL L-DTL Series Bayonet Pin Sighting Hole for visual mating verification Back potted for highest seal integrity Silicone Wire Seals E/RF Grounding Fingered Barrel Scoop-proof design Pin Contacts are recessed to protect from shorting and damage when mating Third-of-a-Turn Bayonet Couple for fast, sure mating with tactile, audible, and visual feedback of proper mating Strong, all-metal (not plastic) Contact Retention Tines allow for highest serviceability ndustry Standard Rear Accessory Thread allows for vast array of endbell options Silicone individual Contact Seals Strong, Gold- Plated Contacts Five Keys and Keyway - one major and four minor assure proper alignment of connector halves before contact engagement Strong, rigid dielectric performs over wide temperature range Lead-in Chamfer guides contact together when mating (Series shown for clarity.) 165

4 STEP 1 Choose Style How to Order STEP 2 Choose Class Receptacles T = No Rear Accessories P = Potting Ring & Cup KJL L-DTL Series S27466 KJL0 S27468 KJL7 + ost Popular Example: ilitary 1 Shell Style 2 Class Example: Commercial STEP 8 Create Part # by using these 7 steps S27468 T 25 F 35 P 3A Size 4 Plating 3B Layout 3B Layout 5 Contact 6 Rotation KJL7 T 25 N 35 P N L/C 1 Shell Style Front mount with rear accessory threads. + Jam Nut with rear accessory threads. 2 Class 3A Size S27656 KJL3 S27505 KJL5 4 Plating + Rear mount with rear accessory threads. Rear mount without rear accessory threads. 5 Contact ATES WTH 6 Rotation F E Plug = Straight Strain Relief (KJL only, not L Spec) = No Rear Accessories used on S27505 & KJL5 only S27467 KJL6 Available with PC pins. Call for more details. 7 odifier Legend for charts: Dark Green Type = ilitary Part number only Black Type/Light Green Field = Commercial Part number only Dark Green Type/Light Green Field = ilitary & Commercial Part number Grey Field = General information only

5 STEP Choose Layout (Listed by Shell Size) For listing by # of contacts, see page 168. Contacts Layout Service Total Number Rating Number 22D ** ** * * 25-8 COAX* *** N** * 3** 25-42, COAX * WHEN CHOOSNG First Number = Step 3A Shell Size Dash = Step 4 Plating Second Number = 3B Layout + = nactive for new designs *Coax **Twinax How to Order ***Coax/Twinax ilitary Commercial P = Pin S = Socket STEP 4 Choose Plating B B Olive Drab Chromate over STEP 5 Choose Contact Note: See Step 6 if you are not ordering contacts with part. A = Less Pin Contacts B = Less Socket Contact STEP 6 Choose Alternate Shell Position N = Normal Standard (omit on ilitary part number) A = Next ost Popular B = Limited Availability C = Check for Availability D = Check for Availability Shell Size N A B C D Cadmium over Electroless Nickel -65 C to 175 C (-85 F to 347 F) F N Electroless Nickel -65 C to 200 C (-85 F to 392 F) A A Clear Chromate over Cadmium over Electroless Nickel -65 C to 150 C (inactive) (-85 F to 302 F) STEP 7 Choose odifier Omit for standard contacts L/C = less contacts, wire hole fillers and plastic insertion/extraction tool. (Purchase Order must state Less Contacts) Note: L/C is not marked on part ay be used for special contact types (PC Pin, Thermocouple, Fiberoptic). ating Face of Receptacle For other commercial modification, i.e., less tools, with PC contact or with endbell, call. 167 KJL L-DTL Series

6 Layouts by Number of Contacts View of ating Face of Pin nsert Drawing not to scale; mating face view of pin insert shown (socket view is opposite) Contacts Pin nsert Only nactive. Use 9-35 KJL L-DTL Series SERVCE RATNG SERVCE RATNG SERVCE RATNG # # # # # # #8 ** # #8 COAX*** # # # #22D # #20 Contacts #20 4-# # #22D #20 1-# # # #12 Contacts nactive. Use Contacts # #20 nactive. Use SERVCE RATNG # # # #22D #22 2-# #16 12#12 Contacts SERVCE RATNG # #20 2-# # #20 1-# #20 13-#16 4-#12* 3-#8** N # *Coax **Twinax ***Coax/Twinax. Call for more information.

7 Layouts by Number of Contacts Contacts Pin nsert Only nactive. Use SERVCE RATNG SERVCE RATNG #20 nactive. Use #22D nactive. Use # #16 nactive. Use #20 2-#16 Contacts SERVCE RATNG #20 4-#8*, COAX #20 20-# #20 8-# #20 4-#16 2-#8* #20 Contacts # # # # #22D #22D 8-#20 10-#16 6-#12 Contacts nactive. No Replacement KJL L-DTL Series SERVCE RATNG #22D # #22D 2-#20 11-# # #22D #22 Contacts nactive. Use nactive. No Replacement nactive. Use SERVCE RATNG #22D #22D # # #22D *Coax **Twinax ***Coax/Twinax. Call for more information. 169

8 Contacts Pins KJL L-DTL Series Contact Wire Size Pin Wire Strip Wire Hole Size AWG Contact Color Bands Lengths Wire Range Filler Color Part Number in ax 22D 28,26,24& / Orange Blue Black.125 (3.18).030 (0.76).054 (1.37) S Black *22 28,26& / Orange Blue Brown.125 (3.18).030 (0.76).050 (1.27) S Black *22 26,24& / Orange Blue Red.125 (3.18).034 (0.86).060 (1.52) S Black 20 20,22& / Orange Blue Orange.188 (4.77).040 (1.02).083 (2.11) S Red 16 16,18& / Orange Blue Yellow.188 (4.77).065 (1.65).109 (2.77) S Blue 12 12& / Orange Blue Green.188 (4.77).097 (2.46).142 (3.61) S Yellow 8 Coax (3.43).155 (3.94) S Sockets 1st 2nd 3rd + For PC Pin, Coax and Fiber Optic (L-T-29504/4) contacts, call. * nactive for new designs Head goes in first, trim excess 1st 2nd 3rd Contact Wire Size Socket Wire Strip Wire Hole Size AWG Contact Color Bands Lengths Wire Range Filler Color in ax 22D 22,26,24& / Orange Yellow Gray.125 (3.18).030 (0.76).054 (1.37) S Black 20 20,22& / Orange Green Brown.188 (4.77).040 (1.02).083 (2.11) S Red 16 16,18& / Orange Green Red.188 (4.77).065 (1.65).109 (2.77) S Blue 12 12& / Orange Green Orange.188 (4.77).097 (2.46).142 (3.61) S Yellow 8 Coax (3.43).155 (3.94) S For PC Pin, Coax and Fiber Optic (L-T-29504/5) contacts, call. * nactive for new designs Head goes in first, trim excess 170

9 Contacts Hand Crimp Power Turret Use Locator Plastic nsertion/ nsertion Extraction etal nsertion Color etal Extraction Color Tool Crimp Tool Heads Color Extraction Tool Tip Color Tip Color Tool Band Tool Band /2-01 CBT / /14-01 Green White S27495A22 Black S27495R22 Black White 22520/2-01 CBT / /14-01 Green White S27495A22 Black S27495R22 Black White 22520/2-01 CBT / /14-01 Green White S27495A22 Black S27495R22 Black White 22520/1-01 CBT /1-04 Red 81969/14-10 Red Orange S27495A20 Red S27495R20 Red White 22520/1-01 CBT /1-04 Blue 81969/14-03 Blue White S27495A16 Blue S27495R16 Blue White 22520/1-01 CBT /1-04 Yellow 81969/14-04 Yellow White DAK95-12B - DRK95-12B D Tool Kit D Tool Kit Kit contains: Crimp tool Locator(s) etal insertion tool etal extraction tool nstructions n a handy carrying case KJL L-DTL Series Hand Crimp Power Turret Use Locator Plastic nsertion/ nsertion Extraction etal nsertion Color etal Extraction Color Tool Crimp Tool Heads Color Extraction Tool Tip Color Tip Color Tool Band Tool Band /2-01 CBT / /14-01 Green White S27495A22 Black S27495R22 Black White 22520/1-01 CBT /1-04 Red 81969/14-10 Red Orange S27495A20 Red S27495R20 Red White 22520/1-01 CBT /1-04 Blue 81969/14-03 Blue White S27495A16 Blue S27495R16 Blue White 22520/1-01 CBT /1-04 Yellow 81969/14-04 Yellow White DAK95-12B - DRK95-12B D Tool Kit D Tool Kit Kit contains: Crimp tool Locator(s) etal insertion tool etal extraction tool nstructions n a handy carrying case 171

10 KJL L-DTL Series Plugs S27467/KJL6 Receptacles S27466/KJL0 S27656/KJL3 S27505E/KJL5 Dimensions Shell L ax. C Size A Dia. ax. G Dia ax. Overall Length Rear Thread T Class P Class UNEF-2A (14.86).859 (21.82) (31.34) (42.44) 7/ (18.21).984 (24.99) (31.34) (42.44) 9/ (22.00) (29.36) (31.34) (42.44) 11/ (25.15) (32.54) (31.34) (42.44) 13/ (28.32) (35.71) (31.34) (42.44) 15/ (31.04) (38.51) (31.34) (42.44) 1-1/ (34.21) (41.68) (31.34) (44.86) 1-3/ (37.39) (44.86) (31.34) (44.86) 1-5/ (40.56) (48.03) (31.34) (44.86) 1-7/16-18 Shell L ax Overall Length B ax C Size A Dia. ax Rear Thread J ax F ax S (T.P.) H ax S27466/ S27656/ S27505E/ S27466 UNEF-2A KJL0** KJL3 KJL5 KJL0 KJL3 KJL5 KJL0 KJL (14.55) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 7/ (2.54).958 (24.33).719 (18.26).138 (3.51) (17.81) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 9/ (2.54) (26.70).812 (20.62).138 (3.51) (21.62) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 11/ (2.54) (29.08).906 (23.01).138 (3.51) (24.79) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 13/ (2.54) (31.47).969 (24.61).138 (3.51) (27.97) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 15/ (2.54) (33.83) (26.97).138 (3.51) (30.68) (31.50) (31.67) (27.91).632 (16.05).820 (20.83) 1-1/ (2.54) (37.03) (29.36).138 (3.51) (33.86) (31.50) (31.67) (27.94).602 (15.29).790 (20.07) 1-3/ (3.30) (40.18) (31.75).138 (3.51) (37.03) (31.50) (31.67) (27.94).602 (15.29).790 (20.07) 1-5/ (3.30) (43.38) (34.93).157 (3.99) (40.21) (31.50) (31.67) (27.94).602 (15.29).790 (20.07) 1-7/ (3.30) (46.53) (38.10).157 (3.99) S27466/KJL0 See page 257 For Nut Plates and Sealing Screws. ++ ost Popular ** Least Popular See page 266 for endbell tightening tools. S27656/KJL3 S27505/KJL5 Note: K =.219 (5.56) for sizes (6.35) for sizes S27468/KJL7 172 Shell Overall Length U ax V C Size A Dia. ax. D Dia. ax. H ax. Jam Nut S ax. Y ax. J ax. Jam Nut Rear Thread Class T Class P Flats Thread UNEF-2A (14.55).655 (16.64).120 (3.05) (34.50) (36.86).892 (22.66) (30.58) (26.97).662 (16.81) 11/16-24UNEF 7/ (17.81).755 (19.18).120 (3.05) (34.50) (36.86) (25.83) (35.33) (31.75).810 (20.57) 13/16-24UNEF 9/ (21.62).942 (23.93).120 (3.05) (34.50) (36.86) (30.61) (38.51) (34.93).960 (24.38) 1-20UNEF 11/ (24.79) (27.08).120 (3.05) (34.50) (36.86) (33.76) (41.68) (38.10) (27.56) 1-1/8-18UNEF 13/ (27.97) (30.25).120 (3.05) (34.50) (36.86) (39.96) (44.86) (41.28) (30.73) 1-1/4-18UNEF 15/ (30.68) (33.43).151 (3.84) (34.50) (36.86) (40.11) (49.63) (46.02) (33.45) 1-3/8-18UNEF 1-1/ (33.86) (36.60).151 (3.84) (34.50) (36.86) (43.31) (52.78) (49.23) (36.63) 1-1/2-18UNEF 1-3/ (37.03) (39.78).151 (3.84) (34.50) (36.86) (46.46) (55.98) (52.37) (39.80) 1-5/8-18UNEF 1-5/ (40.21) (42.95).151 (3.84) (34.50) (36.86) (51.23) (59.13) (55.58) (42.98) 1-3/4-18UNS 1-7/16-18

11 KJL Flanged Panel Cutouts Dimensions H ±.005 (0.13) 4 HOLES A (0.25) (0.00) KJL Jam Nut Panel Cutouts Panel Thickness R (T.P.) S27466/KJL0 Front Panel ount (not recommended for rear mounting) B Shell A Dia. Screw Size ( ) H Dia. R (T.P.) Size (16.89).125 (3.18).719 (18.26) # (20.62).125 (3.18).812 (20.62) # (24.51).125 (3.18).906 (23.01) # (27.55).125 (3.18).969 (24.61) # (30.73).125 (3.18) (26.97) # (33.57).125 (3.18) (29.36) # (36.75).125 (3.18) (31.75) # (39.85).152 (3.86) (34.93) # (43.25).152 (3.86) (38.10) #6 See page 257 For Nut Plates and Sealing Screws. Shell Size A Diameter ( ) B Diameter ( ) (17.28) (17.02) (20.96) (19.59) (25.65) (24.26) (28.83) (27.56) (32.00) (30.73) (35.18) (33.91) (38.35) (37.08) (41.53) (40.26) (44.70) (43.43) S27656/KJL3 S27505E/KJLE Rear Panel ount (including hardware) B KJL L-DTL Series Size B ax panel and screw head Size B ax panel screw head 9 inches (mm) 9 inches (mm) min.062 (1.57) 15 (5.94) 15 max.125 (3.18) (5.18) (5.18) (4.90)

12 Accessories KJL L-DTL Series Receptacle Dust Caps KJL Dummy Receptacles For Flanged For Jam Nut Plug Cap /9-9B S27502**9C S27502**9N S27501**9C /9-11B S27502**11C S27502**11N S27501**11C /9-13B S27502**13C S27502**13N S27501**13C /9-15B S27502**15C S27502**15N S27501**15C /9-17B S27502**17C S27502**17N S27501**17C /9-19B S27502**19C S27502**19N S27501**19C /9-21B S27502**21C S27502**21N S27501**21C /9-23B S27502**23C S27502**23N S27501**23C /9-25B S27502**25C S27502**25N S27501**25C ** Select code for plating B = Olive Drab Chromate over Cadmium over Nickel (500 Hour Salt Spray) F = Electroless Nickel (Fluid Resistant) A = Gold ridite over Cadmium over Nickel C = Hard Anodize Endbells Cable Range KJL Straight Low Cost Right Angle Low Cost in ax /49-2-8** 85049/47-**8.098 (2.50).234 (5.94) / ** 85049/47-** (3.80).234 (5.94) / ** 85049/47-** (4.80).328 (8.33) / ** 85049/47-** (6.60).457 (11.61) / ** 85049/47-** (7.20).614 (15.60) / ** 85049/47-** (8.30).634 (16.10) / ** 85049/47-** (8.70).698 (17.73) / ** 85049/47-** (9.70).823 (20.90) / ** 85049/47-** (10.60).853 (21.67) ** Select code for connector plating W = Olive Drab Chromate over Cadmium over Nickel (1,000 Hour Salt Spray) N = Electroless Nickel (Fluid Resistant) A = Black Anodize 174

13 Accessories Shell Size Self Locking Endbells Clamp Range KJL Straight Right Angle in ax /49-2#8** 85049/47#**8.098 (2.49).234 (5.94) /49-2#10** 85049/47#** (3.89).234 (5.94) /49-2#12** 85049/47#** (4.83).328 (8.33) /49-2#14** 85049/47#** (6.60).457 (11.61) /49-2#16** 85049/47#** (7.19).614 (15.60) /49-2#18** 85049/47#** (8.25).634 (16.10) /49-2#20** 85049/47#** (8.71).698 (17.73) /49-2#22** 85049/47#** (9.68).823 (20.90) /49-2#24** 85049/47#** (10.62).853 (21.67) # Add S for Self Locking: S = Self Locking with Detent ** Select code for connector plating W = Olive Drab Chromate over Cadmium over Nickel (1,000 Hour Salt Spray) N = Electroless Nickel (Fluid Resistant) S = 300 Series Steel, Passivated S=Straight Sealed E/RF A=90 Orientation Description B= /62 Y N S Heat Shrink Boot Adapters Designed for use with straight or right angle shrink boots. A knurled rear section with a boot groove provides an excellent surface for the boot to grab the metal endbell. Available with lock wire and drain holes. See Heat Shrink Boots on pages /32 N N S Extender Back Shell Non-environmental design for use with jacketed cable allows extra space to break out the wires and still provide stain relief clamping to the outside of the cable jacket. KJL L-DTL Series 85049/17 Y Y S Extender Back Shell This E/RF shielding, environmentally sealing endbell features a standard style cable clamp with gland seal at the end of and extender style backshell /29 N Y S Extender Back Shell This E/RF shielding, non-environmentally sealing endbell features a standard style cable clamp. Banding Y Y Banding Adapter Banding adapters utilize a band of metal that fastens and grounds cable shields to the outside of endbells. This method of terminating shields has advantages in that they typically use tools to tighten and trim the bands. These tools make the termination tight, repeatable, reworkable (if you 85049/85 S make a mistake just cut the band off and start again) and 85049/86 B facilitates service. Banding adapters help lower the total 85049/87 A applied cost by having simpler designs that have fewer parts with uncomplicated assembly procedures. Custom SAB Custom Designs f the ilitary Standard endbells don t fit your needs, just call us and we will customize an endbell solution to fit you. ost of these customized endbells are typically assembled Call in 4-8 weeks or sooner! 85049/27 N N S E Nut Wire seal compression nut 175

14 Assembly nstructions Wire Stripping Strip insulation from end of wire to be crimped. (See table for proper stripping dimensions.) Do not cut or damage wire strands. Contact Crimping Wire Size A 22D.125 (3.18) (4.77) (4.77) (4.77) KJL L-DTL Series 1. nsert stripped wire into contact crimp pot. Wire must be visible thru inspection hole. Contact nsertion 1. Remove hardware from plug or receptacle and slip over wire bundle in proper order for reassembly. 4. Remove tool and pull back lightly on wire to make sure contact is properly seated. Repeat operation with remainder of contacts to be inserted, beginning with the center cavity and working outward in alternating rows. Contact Extraction 2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. nsert contact and wire into locator. Squeeze tool handle firmly and completely to insure a proper crimp. The tool will not release unless the crimp indentors in the tool head have been fully actuated. 2. Using proper plastic or metal insertion tool for corresponding contact, position wire in tip of the tool so that the tool tip butts up against the contact shoulder. 5. After all contacts are inserted, fill any empty cavities with wire sealing plugs. Reassemble plug or receptacle hardware. 3. Release crimped contact and wire from tool. Be certain the wire is visible thru inspection hole in contact. 3. Press tool against contact shoulder and, with firm and even pressure, insert wired contact and tool tip into center contact cavity. A slight click may be heard as metal retaining tines snap into place behind contact shoulder. Crimp Kits D Tool Kit D Tool Kit 1. Remove hardware from plug or receptacle and slide hardware back along wire bundle. 2. Using plastic or metal extraction tool with proper color code corresponding to contact size, place wire in tool. 3. nsert tool into contact cavity until tool tip bottoms against the contact shoulder, expanding clip retaining tines. 4. Hold wire firmly in tool and extract wired contact and tool. Repeat operation for all contacts to be extracted. 5. Fill any empty cavities with wire sealing plugs. Reassemble plug or receptacle hardware. 176 Note: KJ Series shown.