STRAIGHT DIP SOLDER PLUG
|
|
|
- Cameron Blankenship
- 5 years ago
- Views:
Transcription
1 STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester UL 94V-0 # Different plating options are available. # Contact Material: Phosphor bronze # For other options consult the Sales Office! T (1.417) (1.736) (1.008) T (1.842) (2.161) (1.436) T (2.352) (2.669) (1.937) T (2.947) (3.272) (2.538) - # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel
2 STRAIGHT DIP SOLDER RECEPTACLE 8052 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester UL 94V-0 # Different plating options are available. # Contact Material: Phosphor bronze # For other options consult the Sales Office! T (1.417) (1.736) (0.992) T (1.842) (2.161) (1.413) T (2.352) (2.669) (1.917) T (2.947) (3.272) (2.524) - # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel RECOMMENDED HOLE PATTERN
3 RIGHT ANGLE DIP SOLDER PLUG 8053 SERIES SERIES. For PCB Solder. Centronic Connector. # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester UL 94V-0 # With mounting holes # Contact Material: Phosphor bronze # Available with ground tab # Different plating options are available. # For other options consult the Sales Office! T (1.417) (1.720) (1.008) T (1.842) (2.146) (1.436) T (2.352) (2.665) (1.937) T (2.947) (3.260) (2.538) - # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel RECOMMENDED HOLE PATTERN
4 RIGHT ANGLE DIP SOLDER RECEPTACLE 8054 SERIES SERIES. For PCB Solder. Centronic Connector. # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester UL 94V-0 # With retaining clip # Contact Material: Phosphor bronze # For other options consult the Sales Office # Different plating options are available.! T (1.417) (1.720) (0.992) T (1.842) (2.146) (1.413) T (2.352) (2.661) (1.917) T (2.947) (3.260) (2.524) - # T = 3. Gold flash over 50µ nickel # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel RECOMMENDED HOLE PATTERN
5 SOLDER PLUG CONNECTOR WITH HOOD 8055 SERIES SERIES. For Wire Solder. Centronic Connector. # Available in 36 and 50 circuits # Nickel plated metal shell and metal hood # Insulator Material: Glass filled polyester UL 94V-0 # Locking system for complementary connector # Contact Material: Phosphor bronze # Accepts a variety of multi conductor cables # Different plating options are available # For other options consult the sales office E F T (2.102) (2.437) (1.941) (0.890) (1.280) 7.70 (0.303) T (2.701) (3.031) (2.531) (0.984) (1.409) 8.40 (0.331) # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel
6 SOLDER PLUG CONNECTOR WITH HOOD 8056 SERIES SERIES. For Wire Solder. Centronic Connector. # Available in 36 and 50 circuits # Nickel plated metal shell and metal hood # Insulator Material: Glass filled polyester UL 94V-0 # Connector with bail locking device # Contact Material: Phosphor bronze # Accepted variety of multi conductors cable # Different plating options are available # For other options consult the sales office E F T (2.352) (2.689) (1.917) (0.909) (1.311) T (2.947) (3.272) (2.524) (0.984) (1.378) - # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 4. 10µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel
7 CENTRONIC IDC MALE TYPE 8060 SERIES SERIES. For 1.27mm For Flat Ribbon Cable Features! Available in 36 and 50 circuits! Available in plastic or metal type! Insulator Material: P.B.T UL 94V-0! Different plating options are available! Contact Material: Phosphor bronze! For other options consult the Sales Office PLASTIC VERSION T (2.110) 62.2 (2.449) (1.941) (2.008) T (2.693) 77.6 (3.055) (2.535) (2.713) METALIC VERSION T (2.067) (2.421) (1.941) (2.008) T (2.705) (3.012) (2.535) (2.713)! T = 2. Tin plated! T = 3. Gold flash over 50µ" nickel Recommended Finish! T = 5. 15µ gold over 50µ nickel! T = 6. 30µ gold over 50µ nickel
8 CENTRONIC IDC FEMALE TYPE 8061 SERIES SERIES. For 1.27mm For Flat Ribbon Cable Features! Available in 36 and 50 circuits! Available in plastic or metal type! Insulator Material: P.B.T UL 94V-0! Different plating options are available! Contact Material: Phosphor bronze! For other options consult the Sales Office PLASTIC VERSION T (2.352) (2.677) (1.925) (2.008) T (2.947) (3.268) (2.524) (2.713) METALIC VERSION T (2.352) (2.677) (1.906) (2.008) T (2.947) (3.268) (2.524) (2.713)! T = 2. Tin plated! T = 3. Gold flash over 50µ" nickel Recommended Finish! T = 5. 15µ gold over 50µ nickel! T = 6. 30µ gold over 50µ nickel
9 IDC TYPE FOR CABLE PLUG 8150 SERIES SERIES. Half- Pitch Ribbon Connectors # Available in 14, 20, 26, 36, 50, 68, 100 and 110 circuits # Shell: Cold roller Steel # Excellent I/O connector # Insulator Material: PBT + Glass-Fibre UL 94V-0 # Wire size (28 to 30 AWG) # Accepts: 8160, 8161 and 8162 series Hoods # Ribbon contact design # For electric equipments of high reliability and high density # Contact Material: Phosphor bronze # packaging # T = 2. Tin plated. # T = 3. Gold flash over 50µ" nickel. # T = 5. 15µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel A B C T (0.677) (0.504) 7.62 (0.300) T (0.827) (0.564) (0.450) T (0.977) (0.804) (0.600) T (1.227) (1.054) (0.850) T (1.579) (1.404) (1.200) T (2.027) (1.854) (1.650) T (2.827) (2.654) (2.450) T (3.078) (2.904) (2.700)
10 SOLDER IDC TYPE FOR CABLE PLUG 8151 SERIES SERIES. Half- Pitch Ribbon Connectors # Available in 14, 20, 26, 36, 50 and 68 circuits # Shell: Cold roller Steel # Excellent I/O connector # Insulator Material: PBT + Glass-Fibre UL 94V-0 # Wire size (AWG 26 to 28) # Accepts: 8160, 8161 and 8162 series Hoods # Ribbon contact design # For electric equipments of high reliability and high density # Contact Material: Phosphor bronze # packaging Circuit Size Part Number Without Hood With Hood (8160) A B C T T (0.677) (0.504) 7.62 (0.300) T T (0.827) (0.564) (0.450) T T (0.977) (0.804) (0.600) T T (1.227) (1.054) (0.850) T T (1.579) (1.404) (1.200) T T (2.027) (1.854) (1.650) # T = 2. Tin plated # T = 3. Gold flash over 50µ nickel # T = 5. 15µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel Available kit with Connector + Hood TXXX2 XXX= Nº Circuits
11 RIGHT ANGLE DIP PCB RECEPTACLE 8152 SERIES SERIES. For PCB Solder. With Hooks # Available in 20, 26, 36, 50 and 100 circuits # Shell: Cold roller Steel # Excellent I/O connector # Insulator Material: PBT + Glass-Fibre UL 94V-0 # Wire size (AWG 26 to 28) # Accepts: 8160, 8161 and 8162 series Hoods # Ribbon contact design # Staggered four rows of 2.54mm(0.100 ) spacing with row- # Contact Material: Phosphor bronze # to row spacing of 1.905mm(.075 ) for board side # Excellent EMI / ESD protection # For electric equipments of high reliability and high density # Easy to use latching system (One-Touch Lock) # packaging E T (1.314) (1.081) (0.647) (0.450) (1.019) T (1.464) (1.231) (0.799) (0.600) (0.970) T (1.714) (1.481) (1.047) (0.850) (1.220) T (2.064) (1.831) (1.398) (1.200) (1.570) T (3.314) (3.081) (2.650) (2.450) (2.820) # T = 2. Tin plated # T = 5. 15µ gold over 50µ nickel # T = 3. Gold flash over 50µ" nickel # T = 6. 30µ gold over 50µ nickel
12 R/ANGLE DIP SOLDER PCB RECEPTACLE 8153 SERIES SERIES. For PCB Solder. With HEX Screws # Available in 26, 36, 50 and 100 circuits # Insulator Material: PBT + Glass Fibre UL 94V-0 # Ribbon contact design # Staggered four rows of 2.54mm(0.100 ) spacing with row- # Excellent I/O connector # To row spacing of 1.905mm(.075 ) for board side # Excellent EMI / ESD protection # For electric equipments of high reliability and high density # Stable by hex screw lock # packaging # Contact Material: Phosphor bronze # For other options consult the Sales Office # Shell: Cold roller Steel # T (1.464) (1.231) (0.799) (0.600) T (1.714) (1.481) (1.047) (0.850) T (2.064) (1.831) (1.398) (1.200) T (3.314) (3.081) (2.650) (2.450) # T = 2. Tin plated. # T = 3. Gold flash over 50µ nickel. # T = 5. 15µ gold over 50µ nickel # T = 6. 30µ gold over 50µ nickel
13 R/ANGLE DIP SOLDER PCB RECEPTACLE 8154 SERIES SERIES. For PCB solder. SMT Mounting # Available in 26, 36, 50 and 100 circuits # Shell: Cold roller Steel # Excellent I/O connector # Insulator Material: PBT + Glass Fibre UL 94V-0 # Wire size (AWG 26 to 28) # Accepts: 8160, 8161 and 8162 Hoods series # Ribbon contact design # Staggered four rows of 2.54mm(0.100 ) spacing with row- # Contact Material: Phosphor bronze # To row spacing of 1.905mm(.075 ) for board side # Excellent EMI / ESD protection # For electric equipments of high reliability and high density # Easy to use latching system (One-Touch Lock) # packaging E T (1.464) (1.231) (0.799) (0.600) (0.970) T (1.714) (1.481) (1.047) (0.850) (1.220) T (2.064) (1.831) (1.398) (1.200) (1.570) T (3.314) (3.081) (2.650) (2.450) (2.820) # T = 2. Tin plated # T = 5. 15µ gold over 50µ nickel # T = 3. Gold flash over 50µ nickel # T = 6. 30µ gold over 50µ nickel
14 R/ANGLE DIP SOLDER PCB RECEPTACLE 8155 SERIES SERIES. For PCB Solder. With HEX Screws # Available in 26, 36, 50 and 100 circuits # Insulator Material: PBT + Glass Fibre UL 94V-0 # Ribbon contact design # Staggered four rows of 2.54mm(0.100 ) spacing with row- # Excellent I/O connector # To row spacing of 1.905mm(.075 ) for board side # Excellent EMI / ESD protection # For electric equipments of high reliability and high density # Stable by hex screw lock # packaging # Contact Material: Phosphor bronze # For other options consult the Sales Office # Shell: Cold roller Steel # T (1.464) (1.231) (0.799) (0.600) T (1.714) (1.481) (1.047) (0.850) T (2.064) (1.831) (1.398) (1.200) T (3.314) (3.081) (2.650) (2.450) # T = 2. Tin plated # T = 5. 15µ gold over 50µ nickel # T = 3. Gold flash over 50µ nickel # T = 6. 30µ gold over 50µ nickel
15 STRAIGHT DIP SOLDER PCB RECEPTACLE 8156 SERIES SERIES. For PCB Solder. # Available in 14, 20, 26, 36, 50 and 68 circuits # Shell: Cold roller Steel # Excellent I/O connector # Insulator Material: PBT + Glass Fibre UL 94V-0 # Wire size (AWG 26 to 28) # Accepts: 8160, 8161 and 8162 Hoods series # Ribbon contact design # Staggered four rows of 2.54mm(0.100 ) spacing with row- # Contact Material: Phosphor bronze # To row spacing of 1.905mm(.075 ) for board side # Excellent EMI / ESD protection # For electric equipments of high reliability and high density # Easy to use latching system (One-Touch Lock) # packaging E T (1.164) 23.64(0.931) 12.62(0.497) 7.62(1.164) 20.04(0.300) T (1.314) 27.45(1.081) 16.43(0.647) 11.43(1.164) 23.85(0.939) T (1.230) 31.26(1.231) 20.24(0.797) 15.24(1.164) 27.66(1.089) T (1.714) 37.61(1.481) 26.59(1.047) 21.58(1.164) 34.01(1.339) T (2.064) 46.50(1.830) 35.48(1.397) 30.48(1.164) 42.90(1.689) T (1.650) 57.93(2.281) 46.91(1.847) 41.91(1.164) 54.33(2.139) # T = 2. Tin plated # T = 5. 15µ gold over 50µ nickel # T = 3. Gold flash over 50µ nickel # T = 6. 30µ gold over 50µ nickel N2 POS. 2 DIM. A ± 0.38 DIM. B DIM. C (1.27 X N/2-1) = DIM. D POS POS. N POS. N/ DIM. B ± 0.10 Pos. N/2-1 DIM. D ± 0.10 Pos. N/ POS. 1 ø 3.00 B±0.10 E±0.10 R 1.5±0.05 (X2) 8.10±0.10 RECOMMENDED PANEL CUTOUT Pos. N ø 0.80 RECOMMENDED HOLE PATTERN Pos.N/2+1
16 PLASTIC HOOD 8160 SERIES SERIES. One Touch Lock Type # Available for 14, 20, 26, 36, 50, 68 and 100 circuits # Latch: Stainless # Excellent EMI / ESD protection # Aesthetic plastic shroud over metal EMI shield # Reliable one-touch-lock mechanism # 180º Degree round cable exit # Insulator Material: ABS UL 94V-0 A B C (1.015) 6.30 (0.248) 6.10 (0.240) (1.169) (0.435) 6.50 (0.256) (1.315) (0.472) 6.90 (0.272) (1.569) (0.435) 7.50 (0.295) (1.917) (0.472) 8.70 (0.343) (2.366) (0.435) 9.50 (0.374) (3.315) (0.472) (0.421) This Part Number include the following items: # 1. Plastic Hood # 2. Spring Latch (2 pcs.) # 3. Button (2 pcs.) # 4. Outer Shell # 5. Inner Shell # 6. Connector (Not included in the code) 100 Contacts Version
17 DIE CAST SHELL 8161 SERIES SERIES. One Touch Lock Type # Available for 20 and 50 circuits # Latch: Stainless # Excellent EMI / ESD protection # 180º Degree round cable exit # Reliable One-touch-lock mechanism # Unique shell design by DIE-CAST (1.173) (1.772) (0.483) (0.976) (1.925) (1.575) (0.559) (1.650) This Part Number include the following items: # 1. Connector # 4. Back shell 1 (1 pcs)! (Not included in the code) # 5. Back shell 2 (1 pcs) # 2. Spring latch (2 pcs.) # 6. Cable clipper # 3. Flat screw # 7. Round screw (2 pcs)
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
Interconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
Directory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
CONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
APPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
CONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
Ethernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
Ì Tripolarized mating
- IDC Page Discrete IDC D-Subminiature... 1675 High Density IDC 0.025" Cable Pitch... 1657 Discrete PCB Mounted IDC... 1674 High Density IDC 0.033" Cable Pitch... 1658 Distribution Systems... 1682 IDT
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
HARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Ethernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA
IP68 Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains IP68 seal to panel
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
D-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
HEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK
HEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK MULTIPOLE INDUSTRIAL CONNECTORS AND ALUMINIUM ENCLOSURES FOR INDUSTRIAL APPLICATIONS Molex offers a wide range of Heavy Duty Connectors: inserts,
Heavy Duty ConnectorS. Fast Check
Heavy Duty ConnectorS FOR INDUSTRIAL APPLICATIONS Fast Check multipole industrial connectors and Aluminium Enclosures for industrial applications Molex offers a wide range of Heavy Duty Connectors: inserts,
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
PRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Coupling ring, screw thread provides secure cable coupling. Shielded Cat 5e coupler maintains screening. Retaining Nut
Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of connectors Panel gasket maintains IP68
1.27mm DUAL ROW FEMALE HEADER
1.27mm DUAL ROW FEMALE HEADER 1296 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ).SMT! Available in 8 through 100 circuits! Contact Material: Copper alloy! Insulator Material: Thermoplastic UL 94V-0! Suitable for
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
EMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
Data sheet C6 A RJ45 field plug pro
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Through Hole Connectors
Through Hole Connectors 43 Whether your Through-Hole Technology applications require a Quick Disconnect Tab, an Insulation Displacement Connector, a Test Point Terminal, a Screw Terminal, a Receptacle,
Customer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
Multi-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC
SHIELDED CABLE CONNECTOR (RECEPTACLE)
1 of 105 G SHIELDED CABLE CONNECTOR (RECEPTACLE) 72861-x01LF, 53389-x01LF 72862-x01LF 10008166-x01LF 2X4 SIGNAL HM1C16D2J110EBLF 72817-xyzLF 72817-xyzLF 4X6 SIGNAL 10013881-x01L, 10013881-x31LF 10074494-x31LF
AC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
EMC Shielding Introduction. RFI Shield Clips Summary EMC SHIELDING.
EMC Shielding Introduction Harwin provides a range of Surface Mount Shield Clips, compatible Shield Cans, and a comprehensive selection of Spring Contacts, to solve a variety of EMC/RFI and grounding issues.
Adam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
Data sheet. E-DAT modul REG 1 port IP20 light gray. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
E-Mark s business philosophy centers upon providing. each of its customers with maximum value. operates out of its facility in Shelton, Connecticut.
Company Profile E-Mark s business philosophy centers upon providing each of its customers with maximum value. This includes product quality appropriate for the application, accurate delivery & competitive
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
CSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
EPIC CIRCON M23 Series
CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strain relief,
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
Single 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
SGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1