Established Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves

Transcription

1 Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves

2 Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard for excellence in the field of valve and damper automation for the oil, gas, power, water, and waste treatment industries around the world. As established leaders in actuation technology, we owe our success to a commitment to quality at every stage, and at every level, of Remote Control s operations. At the heart of the company is an exceptional workforce of highly trained, forward thinking engineers, technicians, and sales support staff. Each play a crucial role in maintaining Remote Control s unrivaled reputation for innovation, reliability and first class after sales support. With several fluid power actuator lines and additional electric actuators available, we are able to offer creative solutions and design systems for virtually any application. Contact Remote Control for your operational or safety application requirements. We will work with you from conception, to design, to manufacture.

3 Remote Control Range The Remote Control Series actuator offers a torque that fills the gap between the RCIO260 and RCIO270 sizes. This model is the most advanced scotch yoke design Remote Control offers with external travel stops in both direction for ± 4 degrees of adjustment. It is available in both double acting and spring return, and incorporates the standard features from the rest of the 200 series Actuators. The pistons are guided in two places with reinforced Teflon bearings which ensure a long seal life. Also in addition an external cam can be customized for different rotations. Specifications Pressure Range (Working) Torque Output 116 PSI continuous Up to 9,336 In-Lbs Temperature Range Standard: -4 F to +175 F High: +32 F to +302 F Low: No option available Stroke 90-4 Media Lubrication Construction Dry or lubricating air, non corrosive gas, water, or light hydraulic oil. None required, all moving parts are factory lubricated for the cycle life of the actuator. For high load refer to IOM. Suitable for indoor or outdoor installation. Bottom Mounting ISO 5211/DIN 3337 Top/Solenoid Mounting Warranty VDI/VDE 3845 (NAMUR) 3-Years up to 1 million cycles (subject to proper use and maintenance)

4 Technical Data Materials of Construction Description Standard Material Finish Actuator Body Extruded Aluminum Alloy Anodized End Cap Die Cast Aluminum Alloy Epoxy Coated Drive Shaft Steel Plated Piston Die Cast Aluminum Alloy Anodized Guide Acetal Resin (POM) Plain O-Rings Nitrile ---- Springs Spring Steel Epoxy Coated Hardware Stainless Steel Plain Features Weights External adjustable limit stops in open and closed positions, ± 4 degrees Wide air channels for short operation times Compact design of end plates, for minimized air consumption Easily changeable cam for different turning angles (accessible without dismantling the actuator) Actuator Weights Weight (Lbs.) DA 42 SR 54 DAM 59 SRM 68 NAMUR solenoid interface High interface position for easy installation of both air and electric connections Anodized cylinders, epoxy coated end caps fastened with stainless steel hardware for corrosion resistance

5 Inside the Actuator Item Description Qty Item Description Qty 1 Adjusting Screw 2 22 Spring Guide (SR Only) 2 2 Lock Nut 2 23 Spring External (SR Only) 2 4 Screw 8 24 Spring Internal (SR Only) 2 6* End Plate Sealing 2 25 Spring Housing (SR Only) 2 7 Cylinder 1 26 Pre-Tensioning Screw (SR Only) 2 8 Scotch Yoke 1 27 Indicator 1 9* Support Element 2 31* Circup, Upper 1 10 Piston 2 32* Middle Washer 1 11 Scotch Yoke Screw 1 33* Support Washer, Upper 1 12* O-Ring 2 36 Bearing, Lower 1 14* Support Band 2 37 Guide Ring 1 15 Drive Shaft 1 38* O-Ring, Lower 1 16 Bearing Upper 1 39* Support Washer, Lower 1 17 End Plate (DA Only) 2 40* Circup, Lower 1 18* O-Ring, Upper 1 64 Stop Ring 1 19 Support Ring 2 65 Washer 2 20 Piston Pin 2 66 Protective Cover 2 21 Piston Roller 2 67 Nut 2 *Indicates Seal Kit Items

6 Specifications DA Air Consumption (Free Air) Anti-Clockwise Rotation Clockwise Rotation 0.80 (U.S. Gallon) 0.88 (U.S. Gallon) SR Air Consumption (Free Air) 0.80 (U.S. Gallon) Operation Times DA (80 psi) (Anti-Clockwise) (Clockwise) Time (sec.) Operation Times SR (80 psi) The times are related to full air flow and may increase depending on solenoid valves and the dimensions of connecting pipes. Time (sec.) 1.1 Torque Charts Torque Output - Double Acting (DA) In-Lbs. (DA) 0 = CLOSED 90 = 0PEN 40 PSI 60 PSI 80 PSI 87 PSI 100 PSI 0 5,257 7,886 10,514 11,470 13, ,474 3,710 4,947 5,390 6, ,735 5,602 7,469 8,151 9,336 Torque Output - Spring Return (SR) In-Lbs. (SR) Function 0 = CLOSED 90 = 0PEN 40 PSI 60 PSI 80 PSI 87 PSI 100 PSI 0 2,938 4,298 5,734 6,188 7,149 Air 60 1,142 1,672 2,231 2,385 2,782 Spring 90 1,545 2,263 3,020 3,207 3, ,490 3,798 5,062 5,594 6, ,224 1,878 2,502 2,759 3, ,691 2,619 3,489 3,830 4,375

7 Dimensions DA DA SR SR NAMUR

8 A full listing of our worldwide sales and service network is available on our website Remote Control 77 Circuit Drive North Kingstown, RI Tel: Fax: Publication Issue 10/12