RT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168
|
|
|
- Joanna McCarthy
- 6 years ago
- Views:
Transcription
1 RT/RTE Series LIT NO: DATE: November 2004 REVISION: A RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650
2 RT/RTE -340/343/400/403/460/463 PARTS LIST 2
3 RT/RTE -340/343/400/403/460/463 PARTS LIST KEY NO. PART NO. DESCRIPTION NO. REQ. KEY NO. PART NO. DESCRIPTION NO. REQ. 1 #1 Spring Hanger, Fwd., 2 Double Lock Pin See Components Section Pin 1 3 /8" Diameter Double Lock Lube Fitting Lock Bolt Kit Key #1 Hanger 2 (Includes Key Nos. 4-6) ½" 13 UNC Bolt ½" Washer ½" 13 UNC Locknut Bushing 1 3 /8" I.D. 2 8 #2 Spring Hanger, Rear See Components Section Rebound Bolt & Spacer Kit 2 (Includes Key Nos. 9-12) ½ 13 UNC Bolt ½" Hardened Washer Spacer ½" 13 UNC Locknut 2 13 #3 Spring Hanger, Extended 2 Leaf Spring See , Components Section Top Pad Bolt, Specify Length Dim. A " Washer " 14 UNS Top Pad Nut Set Screw Kit 4 (Includes Key Nos ) ¾" 10 UNC Top Pad Setscrew Setscrew Lockwasher ¾" 10 UNC Setscrew Nut 4 21* Spring Assembly RT-340/343 STD Duty RT-340/343 Light Duty RT-400/ RT-460/463 21A* RTE-340/ RTE-400/ RTE-460/ Center Bolt, ½" or 5 /8" Diameter, 2 Specify Length 23 Saddle Assembly RT/RTE-340 Height 6 3 /16" (Casting No ) RT/RTE-340 Height 7 3 /16" (Casting No ) RT/RTE-343/400/403 Height 6" (Casting No ) RT/RTE-343/400/403 Height 7 3 /16" (Casting No ) RT/RTE-460/463 Height 6" (Casting No ) RT/RTE-460/463 Height 7 3 /16" (Casting No ) 24 Saddle Cap RT/RTE RT/RTE-343/400/403/460/ /8" 14 UNF Saddle Cap Stud RT/RTE RT/RTE-343/400/403/460/ /8" Washer /8" 14 UNF Saddle Cap Nut 8 28 See Equalizing Beam Assembly 2 Selection Guide Cross Tube Length 44 7 /8" RT/RTE-340, 1 15 /16" Diameter RT/RTE-343/400/403/460/463, 2 7 /16" Diameter 30 Rubber Center Bushing RT/RTE RT/RTE-340 w/ Loose End Plug** RT/RTE-343/ RT/RTE-343/403 w/ Loose End Plug** RT/RTE-463 Optional, Requires Transverse Rods RT/RTE-463 w/ Loose End Plug**, Optional, Requires Transverse Rods 31 Bronze Center Bushing Kit 1 (Includes Key Nos ) L RT/RTE-340 (Optional) L RT/RTE-343/400/403/460/ Bronze Center Bushing RT/RTE-340 (Optional) RT/RTE-343/400/403/460/ Beam Center Sleeve RT/RTE-340 (Optional) RT/RTE-343/400/403/460/ Beam Center Seal RT/RTE-340 (Optional) RT/RTE-343/400/403/460/ Thrust Washer RT/RTE-340 (Optional) RT/RTE-343/400/403/460/ Lube Fitting w/ Forged Beam w/ Fab Beam Bar Pin End Bushing Kit L Non-Shim Type (Includes Key No. 40a and Fasteners) L Shim Type (Includes Key Nos. 39, 40b and Fasteners) 39 Shim / / End Bushing and Adapter Kit L RT/RTE-343/403 (Includes Key Nos. 41a, 42) L RT/RTE-463 (Includes Key Nos. 41b, 42) Bar Pin End Bushing***** 4 40a -- Non-Shim Type 40b -- Shim Type End Bushing Adapter Kit 4 41a L RT/RTE-340/403 41b L RT/RTE L End Bushing RT-343/ Torque Rod Assembly (2-Piece)*** Torque Rod Frame Bracket Transverse Rod Assembly Kit**** 1 (Includes Key Nos ) Backup Plate Transverse Rod Frame Bracket Transverse Rod Assembly (2-Piece) 2 48 Transverse Rod Axle Bracket, See for proper axle bracket and Assembly Instructions NOTE: Brackets for drive axles are supplied by the axle manufacturer. * Specify spring assembly part number, located on side or top of spring clip (as shown in exploded view). Individual spring leaves available: The number 1 (Main Leaf) and number 2 (Wrapper Leaf) can be ordered separately. Use spring part number and add a -001 or Such as Main Leaf. The number 3 leaf is available in addition to the Main and Wrapper Leaves for the extended leaf spring, add -003, such as ** Center Bushing to be used with OTC Installation Tools. *** Hendrickson s part number is stamped on the rod for identification. Be sure and include suffix number when ordering (this number indicates rod length). Hendrickson 2-piece ULTRA RODS can be used to create the desired length. See literature number **** Transverse Rods (Key 47) are mandatory for all walking beam series suspensions with capacities of 44,000 lbs. thru 52,000 lbs. when using rubber equalizing beam center bushings (Key 29), regardless of axle spacing. See SEU-0213 for mandatory use of transverse rods or bronze center bushings. ***** Item included in assembly only, part not sold separately.
4 RT/RTE -480/503/520/523 PARTS LIST 4
5 RT/RTE -480/503/520/523 PARTS LIST KEY NO. PART NO. DESCRIPTION NO. REQ. KEY NO. PART NO. DESCRIPTION NO. REQ. 1 #1 Spring Hanger, Fwd., 2 Double Lock Pin See Components Section Pin 1 3 /8" Diameter Double Lock Lube Fitting Lock Bolt Kit Key #1 Hanger 2 (Includes Key Nos. 4-6) ½" 13 UNC Bolt ½" Washer ½" 13 UNC Locknut Bushing 1 3 /8" I.D. 2 8 #2 Spring Hanger, Rear See Components Section Rebound Bolt & Spacer kit 2 (Includes Key Nos. 9-11) ½" 13 UNC Bolt ½" Hardened Washer Spacer ½" 13 UNC Locknut 2 13 #3 Spring Hanger, Extended 2 Leaf Spring See , Components Section Top Pad Bolt, Specify Length Dim. A " Washer " 14 UNS Top Pad Nut Set Screw Kit 4 (Includes Key Nos ) ¾" 10 UNC Top Pad Setscrew Setscrew Lockwasher ¾" 10 UNC Setscrew Nut 4 21* Spring Assembly RT-480/503/520/523 21A* RTE-480/ Center Bolt, ½" Diameter, 2 Specify Length 23 Saddle Assembly Height 6" (Casting No ) Height 7 3 /16" (Casting No or 47665) Height 11" (Casting No ) Saddle Cap 4 (Replaces ) /8" 14 UNF Saddle Cap Stud /8" Saddle Cap Washer /8" 14 UNF Saddle Cap Nut 8 28 See Equalizing Beam Assembly 2 Selection Guide Cross Tube Diameter 2 7 /16" RT/RTE-480/503, Length 44 7 /8" RT/RTE-520/523, Length 46" 30 Rubber Center Bushing, Optional, Requires Transverse Rods w/ Loose End Plug** L Bronze Center Bushing Kit 1 (Includes Key Nos ) Bronze Center Bushing Beam Center Sleeve Beam Center Seal Thrust Washer Lube Fitting 2 Bar Pin End Bushing Kit L Non-Shim Type (Includes Key Nos. 40a and Fasteners) L Shim Type (Includes Key Nos. 39, 40b and Fasteners) 39 Shim / / End Bushing and Adapter Kit RT-503/523, RTE-503 (Includes Key Nos. 41a, 42) RT-523 (Includes Key Nos. 41b, 42) RT/RTE-503 (Includes Key Nos. 41b, 42) Bar Pin End Bushing***** 4 40a -- Non-Shim Type 40b -- Shim Type End Bushing Adapter Kit 4 41a L RT/RTE-480/503/520/523 (5" Lg. Bushing) 41b L RT/RTE-520/523 (6" Lg. Bushing) 42 End Bushing RT/RTE-480/503 (5" Lg. Bushing) RT/RTE-520/523 (6" Lg. Bushing) Torque Rod Assembly (2-Piece)*** Torque Rod Frame Bracket Transverse Rod Assembly Kit**** 1 (Includes Key Nos ) Backup Plate Transverse Rod Frame Bracket Transverse Rod Assembly (2-Piece) 2 48 Transverse Rod Axle Bracket, See for proper axle bracket and Assembly Instructions NOTE: Brackets for drive axles are supplied by the axle manufacturer. * Specify spring assembly part number, located on side or top of spring clip (as shown in exploded view). Individual spring leaves available: The number 1 (Main Leaf) and number 2 (Wrapper Leaf) can be ordered separately. Use spring part number and add a -001 or Such as Main Leaf. The number 3 leaf is available in addition to the Main and Wrapper Leaves for the extended leaf spring, add -003, such as ** Center Bushing to be used with OTC Installation Tools. *** Hendrickson s part number is stamped on the rod for identification. Be sure and include suffix number when ordering (this number indicates rod length). Hendrickson 2-piece ULTRA RODS can be used to create the desired length. See literature number **** Transverse Rods (Key 47) are mandatory for all walking beam series suspensions with capacities of 44,000 lbs. thru 52,000 lbs. when using rubber equalizing beam center bushings (Key 29), regardless of axle spacing. See SEU-0213 for mandatory use of transverse rods or bronze center bushings. ***** Item included in assembly only, part not sold separately. 5
6 RT -650 PARTS LIST 6
7 RT -650 PARTS LIST KEY NO. PART NO. DESCRIPTION NO. REQ. KEY NO. PART NO. DESCRIPTION NO. REQ. 1, 1-1 #1 Spring Hanger, Forward 2 See Component Section 2, 2-2 #2 Spring Hanger, Rear 2 See Component Section Pin 1½" Diameter Double Lock Pin 1½" Diameter Drawkey Lock 4 (See Item 4-4) 3A Lube Fitting As Req Lock Bolt Assembly 2 Key #1 Hanger Drawkey Assembly 4 Key #1-1 Hanger Bronze Bushing 1½" I.D Steel Bushing 1½" I.D Rebound Bolt & Spacer Assembly Pin Roller Key #2-2 Hanger Top Pad Dim. A 8 9 /16" 2 (Casting No or 48491) Top Pad Dim. A 8 3 /16" Replaced By Set Screw Bolt, Specify Length Dim. B Washer 24 12* Spring Assembly (Includes Key No. 5) Spring Rate 29,400 (Bronze Bushing) Spring Rate 27, Spring Rate 44, Spring Rate 29,400 (Steel Eye Bushing) Center Bolt Specify Length 2 14 Saddle Assembly 2 (Includes Key Nos. 11, 16, 17) Dim. C 7 1 /8" (Casting No , or 48497) Dim. C 9 3 /8" (Casting No or ) Dim. C 10 1 /8" (Casting No or ) Dim. C 11 1 /8" (Casting No or ) Cap "-14 UNS Saddle Cap Stud "-14 UNS Locknut See Equalizing Beam Assembly 2 Selection Guide Rubber Center Bushing Bronze Center Bushing Kit 1 (Includes Key Nos ) Bronze Center Bushing Sleeve Seal Thrust Washer Lube Fitting 2 26 End Bushing Length 6" Length 7" 27 Kit, Adapter w/ 6" Bushing w/ Center Tube and 6" Bushing w/ Chamfered Nut and 6" Bushing w/ 7" Bushing w/ Center Tube and 7" Bushing w/ Hex Nut and 7" Bushing Kit, Tube & Nut Cross Tube Specify Length Torque Rod Assembly, See Note** 2 5¼" Bolt Spacing, Replaces Torque Rod Bushing, 4 Replaces Torque Rod Frame Bracket 2 5¼" Bolt Spacing NOTE: Brackets for drive axles are supplied by the axle manufacturer. * Specify spring assembly part number, located on side or top of spring clip (as shown in exploded view). Individual spring leaves available: The number 1 (Main Leaf) and number 2 (Wrapper Leaf) can be ordered separately. Use spring part number and add a -001 or Such as Main Leaf. ** Hendrickson s part number is stamped on the rod for identification. Be sure and include suffix number when ordering (this number indicates rod length). 7
8 This is a general parts list to provide directional information. Components may vary by mode. For questions, contact Hendrickson Tech Services at ( techservices@hendrickson-intl.com). Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected. No. Rev A Printed in United States of America Truck Suspension Systems 800 South Frontage Road Woodridge, IL USA Fax The Boler Company. Copyright 2004 All Rights Reserved
RT / RTE Rear Suspension
RT / RTE Rear Suspension LIT NO: SP-168 DATE: January 2017 REVISION: F CONTENTS DESCRIPTION Parts Lists Page RT/RTE 34K 40K 46K.... 2 RT/RTE 48K 52K.... 4 RT 65K 70K Heavy-duty... 6 DESCRIPTION Selection
RT / RTE Rear Suspension
RT / RTE Rear Suspension LIT NO: SP-8 DATE: Septemer 2015 REVISION: E CONTENTS DESCRIPTION Parts Lists Page RT/RTE 340/343/400/403/460/463.... 2 RT/RTE 0/3/520/523... 4 RT 6/700 Heavy-duty.... 6 DESCRIPTION
R Rear Suspension R 48K 52K R 40K 46K R 65K R 85K 100K 120K CONTENTS. LIT NO: SP-167 DATE: January 2017 REVISION: D
R Rear Suspension LIT NO: SP-167 DATE: January 2017 REVISION: D CONTENTS DESCRIPTION Parts Lists PAGE R 40K 46K.... 2 R 48K 52K... 4 R 65K... 6 R 85K 100K 120K.... 8 DESCRIPTION PAGE Special Tools... 10
AR2 40K 46K Rear Air Suspension
Rear Air Suspension LIT NO: SP-177 DATE: February 2017 REVISION: E 2 SP-177 1 Equalizing Beam Assembly 2 See Selection Guide 45745-147 2 44643-009L Cross Tube 44 7 8", (If converted from RT/RTE 1 suspension,
Equalizing Beam and Components
Equalizing Beam and Components LIT NO: 45745-147 DATE: September 2016 REVISION: D CONTENTS DESCRIPTION PAGE Introduction...2 and Forged/Cast Beams....3 Equalizing Beams with Bar Pin End Bushings AR2 R
Truck Suspension Past Generation Products
Truck Suspension Past Generation Products LIT NO: SP-179 DATE: December 2012 REVISION: D CONTENTS PARTS LISTS PAGE AR 340...................................... 2 AR 380......................................
HAULMAAX 40K 46K Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: February 2017 REVISION: K CONTENTS DESCRIPTION Page Parts List HAULMAAX 40K 46K.... 2 Selection Guide Outboard Frame Bracket... 5 Inboard Frame Bracket.... 5 DESCRIPTION
HAULMAAX 400/460 Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: July 2015 REVISION: I CONTENTS DESCRIPTION PAGE HMX 400/460... 2 Inboard Frame Bracket.... 4 Outboard Frame Bracket.... 5 DESCRIPTION PAGE Aftermarket Service Kits...
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles LIT NO: SP-233 DATE: December 2017 REVISION: C CONTENTS DESCRIPTION PAGE Technical Notes............................ 2 Selection
PRIMAAX EX Rear Air Suspension for Caterpillar Vehicles Built PRIOR to 2/2016
PRIMAAX EX Rear Air Suspension for Caterpillar Vehicles Built PRIOR to 2/2016 LIT NO: SP-234 DATE: September 2017 REVISION: C CONTENTS Description Page Description Page Technical Notes....2 Selection Guide
PRIMAAX EX PRIMAAX Rear Air Suspension for Mack Vehicles
PRIMAAX EX PRIMAAX Rear Air Suspension for Mack Vehicles LIT NO: SP-231 DATE: August 2017 REVISION: E CONTENTS DESCRIPTION Parts Lists Page PRIMAAX EX with Drum Brakes.... 2 PRIMAAX EX with Air Disc Brakes....
SOFTEK / AIRTEK Front Suspension System for FCCC Motorhome Chassis
SOFTEK / AIRTEK Front Suspension System for FCCC Motorhome Chassis LIT NO: SP- DATE: November REVISION: G CONTENTS DESCRIPTION PAGE DESCRIPTION PAGE SOFTEK with STEERTEK NXT Axle, K/0K/2K Capacity Vehicles
HAS Rear Air Suspension
HAS Rear Air Suspension LIT NO: SP-149 DATE: August 2016 REVISION: I CONTENTS DESCRIPTION Page Parts Lists HAS for Vehicles Equipped with Air Disc Brakes 21K 23K 40K 46K.... 2 HAS for Vehicles Equipped
RT /RTE Series Frame Hangers
LIT NO: 45745-038 DATE: July 2010 REVISION: E CONTENTS PAGE Introduction Guide Instructions............... 2 #1 Front Frame Hanger Clamp Mount............................ 3-4 Under Mount RT 650........................
AIRTEK Front System for Mack Vehicles
AIRTEK Front System for Mack Vehicles LIT NO: SP-180 DATE: March 015 REVISION: G AIRTEK with STEERTEK NXT Axle Vehicles built AFTER July 011 AIRTEK with STEERTEK Axle Vehicles built PRIOR to July 011 Vehicles
AIRTEK Front System for Volvo Vehicles
AIRTEK Front System for Volvo Vehicles LIT NO: SP-174 DATE: February 2017 REVISION: J CONTENTS Description Page Description Page Parts Lists AIRTEK with STEERTEK NXT Axle Vehicles built AFTER July 2011....
RT RTE Steel Leaf Spring Rear Suspension
Steel Leaf Spring Rear Suspension SUBJECT: Service Instructions LIT NO: 17730-070 DATE: December 2017 REVISION: H TABLE OF CONTENTS Section 1 Introduction... 2 Section 2 Product Description... 2 Section
CONTENTS. Height Control Valves 3. Air Springs 4. Shock Absorbers 4. Leaf Spring Assemblies 4. Tie Rods 6 REAR SUSPENSIONS.
CONTENTS FRONT SUSPENSIONS AND AXLE SYSTEMS Height Control Valves 3 Air Springs 4 Shock Absorbers 4 Leaf Spring Assemblies 4 Kingpin Bushings & Thrust Bearings 5 Tie Rods 6 Air Springs 7 Height Control
AIRTEK for Mack Vehicles Single to Dual Height Control Valve Conversion Kit
Single to Dual Height Control Valve Conversion Kit SUBJECT: Kit Nos.60961-128 and 60961-129 LIT NO: 59310-030 DATE: April 2006 REVISION: A INTRODUCTION As of March 2006 all of Mack vehicles will be equipped
PARTS LIST HT250US LIT NO: L582
PARTS LIST HT250US LIT NO: L582 DATE: September 2002 REVISION: A 3 2 4b 5 4a 6 5 7 6 7 1 7a 2 ITEM DESCRIPTION PART NO. QTY. NOTE Available in ride heights of 3.5", 4", 5.5", 6.5", 7.5", 9", 12", 14" 1
PRIMAAX EX PRIMAAX Rear Air Suspension for Kenworth Vehicles
PRIMAAX EX PRIMAAX EX PRIMAAX Rear Air Suspension for Kenworth Vehicles SUBJECT: Service Instructions LIT NO: 17730-263 DATE: November 2014 REVISION: E TABLE OF CONTENTS Section 1 Introduction... 2 Section
RS NO: SUBJECT:
RS-340 Thru 520 NO: SUBJECT: Springing: Frame Hangers, Load Cushions and Saddle Assembly EFFECTIVE DATE: July 1993 REVISION: E CONTENTS Item Subject Page 1 Introduction 2 2 Important Safety Notice 2 3
PARTS LIST HT250US UNDERSLUNG. LIT NO: L582 DATE: February 2017 REVISION: E
PARTS LIST HT250US UNDERSLUNG LIT NO: L582 DATE: February 2017 REVISION: E Picture shown may not resemble all models. 3 2a 8 6 7b 8 5 8 6 7a Wingless, weld-on frame bracket with QUIK-ALIGN 9a 8 5 1 9a
PARTS LIST INTRAAX AANT 23K. LIT NO: L1057 DATE: April 2018 REVISION: F
PARTS LIST INTRAAX AANT 23K LIT NO: L1057 DATE: April 2018 REVISION: F SUSPENSION ASSEMBLIES Frame Bracket Assembly 2 12 11 10 8 1 13 Illustration 1 With cast, bolt-on 13 Manufactured Late August 2002
AIRTEK for Volvo Vehicles Single to Dual Height Control Valve Conversion Kit
Single to Dual Height Control Valve Conversion Kit SUBJECT: 60961-101 and 60961-102 LIT NO: 59310-026 DATE: January 2006 REVISION: A INTRODUCTION Prior to March 2005, some Volvo vehicle configurations
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649 DATE: December 2008 REVISION: B VANTRAAX HKANT 40K / HKA180 PARTS LIST SLIDER BOX ASSEMBLY 1 For box assembly replacement, contact a customer service
PARTS LIST INTRAAX AAEDL. LIT NO: L1058 DATE: June 2016 REVISION: B
PARTS LIST INTRAAX AAEDL LIT NO: L1058 DATE: June 2016 REVISION: B 5 6 8 4 8 2 9 7 Bolt-on C-Channel Wingless, weld-on frame bracket with QUIK-ALIGN 11 13 2 12 10 1 2 ITEM DESCRIPTION PART NO. QTY. NOTE
HA/HAS Series. NO: SUBJECT: Driveline Angularity Procedures DATE: March, 1999 REVISION: C CONTENTS ITEM SUBJECT PAGE
HA/HAS Series NO: SUBJECT: Driveline Angularity Procedures DATE: March, 1999 REVISION: C CONTENTS ITEM SUBJECT PAGE 1 Introduction EDGE... 2 2 Important Safety Notice... 3 3 Frame Slope... 4 4 Axle/Suspension
TECHNICAL PUBLICATION Bar Pin Alignment 340 Thru 520 Series NO: SUBJECT: Bar Pin Alignment Instructions DATE: November 1997 REVISION: C
Bar Pin Alignment 340 Thru 520 Series NO: SUBJECT: Bar Pin Alignment Instructions DATE: November 1997 REVISION: C CONTENTS Item Subject Page 1 Introduction 2 2 Bar Pin Beam End Connection Features 2 3
PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405
PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405 DATE: December 2008 REVISION: F 2b 2a Used on 25K and 30K only 1 2 ITEM DESCRIPTION PART NO. PER AXLE NOTE 1 AXLE/BEAM WELDMENT HTRAAX.XX Contact Hendrickson
PARTS LIST VANTRAAX HRRNT 40K. LIT NO: L1083 DATE: January 2012
PARTS LIST VANTRAAX HRRNT 40K LIT NO: DATE: January 2012 DO DO NOT NOT W E L D W E L D DO W E L D VANTRAAX HRRNT 40K SLIDER BOX ASSEMBLY 1 6 8 21 22 3 NOT 2 VANTRAAX HRRNT 40K SLIDER BOX ASSEMBLY QTY.
PARTS LIST EDT300 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST EDT00 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 97- DATE: October 05 REVISION: A SECTION PAGE Introduction... Axle and Suspension Identification... Axle ID Plate... Suspension Assembly Number
PARTS LIST HT250U UNDERSLUNG LIT NO: L938
PARTS LIST HT250U UNDERSLUNG LIT NO: L938 DATE: February 2010 REVISION: B Picture shown may not resemble all models. 2b bracket with QUIK-ALIGN 2a bracket, welded alignment 1 2 QTY. FITS MODELS ITEM DESCRIPTION
PARTS LIST INTRAAX AAL 23K / 25K / 30K. LIT NO: L1060 DATE: February 2018 REVISION: B
PARTS LIST INTRAAX AAL 3K / 5K / 30K LIT NO: L1060 DATE: February 018 REVISION: B 5 8 9 8 6 7 Wingless, weld-on frame bracket with QUIK-ALIGN Wingless, bolt-on frame bracket with QUIK-ALIGN 14 11 13 1
PARTS LIST VANTRAAX HKAT 69K25. LIT NO: L1079 DATE: October 2016 REVISION: D
PARTS LIST VANTRAAX HKAT 69K25 LIT NO: L1079 DATE: October 2016 REVISION: D VANTRAAX HKAT 69K25 PARTS LIST SLIDER BOX ASSEMBLY 1 a a 13 12 11 14 10 Units built in Sept. 2012 and after SLIDER PINS Units
PARTS LIST VANTRAAX HKANT 40K/ HKA180. LIT NO: L649 DATE: July 2015 REVISION: D
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649 DATE: July 2015 REVISION: D SLIDER BOX ASSEMBLY 1 13 For box assembly replacement, contact a customer service representative. 12 14 11 10 Units built
PRIMAAX EX FIREMAAX EX/ PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension
FIREMAAX EX PRIMAAX EX FIREMAAX EX/ PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension PRIMAAX EX SUBJECT: Service Instructions LIT NO: 17730-238 DATE: December 2014 REVISION: E TABLE OF CONTENTS Section
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles SUBJECT: Service Instructions LIT NO: 17730-283 DATE: June 2012 REVISION: A TABLE OF CONTENTS Section 1 Introduction.........................
TECHNICAL PROCEDURE INTRAAX SUSPENSION SYSTEMS TABLE OF CONTENTS
TECHNICAL PROCEDURE INTRAAX SUSPENSION SYSTEMS SUBJECT: Shock Mount Replacement Procedures LIT NO: L724 (Supersedes AM11 Rev B and L594 Rev C) DATE: December 1999 TABLE OF CONTENTS PREPARATION FOR PROCEDURES
PARTS LIST AANT230 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST AANT230 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 974-2 DATE: July 206 REVISION: C SECTION PAGE Introduction... 2 Axle and Suspension Identification... 3 Axle ID Plate... 3 Suspension Assembly
HN Series Rear Suspension
Rear Suspension SUBJECT: Service Instructions LIT NO: 17730-227 DATE: August 2013 REVISION: C TABLE OF CONTENTS Section 1 Introduction......................... 2 Section 2 Product Description..................
PRIMAAX. - MAAXimize durability - MAAXimize driver comfort - MAAXimize performance. Severe-Duty Vocational Air Suspension
PRIMAAX EX - MAAXimize durability - MAAXimize driver comfort - MAAXimize performance Severe-Duty Vocational Air Suspension To learn more about PRIMAAX EX, call 855.743.3733 or visit www.hendrickson-intl.com
PARTS LIST INTRAAX AANT230 ZMD TRAILER SUSPENSION SYSTEM. LIT NO: DATE: November 2018 REVISION: B
PARTS LIST INTRAAX AANT30 ZMD TRAILER SUSPENSION SYSTEM LIT NO: 97114-117 DATE: November 018 REVISION: B INTRAAX AANT30 ZMD TRAILER SUSPENSION SYSTEMS PARTS LIST TABLE OF CONTENTS INTRODUCTION 3 ABBREVIATIONS
Technical Procedure TRAILER SUSPENSION SYSTEMS TABLE OF CONTENTS
Technical Procedure TRAILER SUSPENSION SYSTEMS SUBJECT: Non-delay Height Control Valve Installation Procedure LIT NO: L668 DATE: July 207 REVISION: F TABLE OF CONTENTS Service Notes... 2 Contacting Hendrickson...
PRIMAAX EX FIREMAAX EX PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension
FIREMAAX EX PRIMAAX EX FIREMAAX EX PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension PRIMAAX EX SUBJECT: Service Instructions LIT NO: 17730-238 DATE: March 2018 REVISION: F TABLE OF CONTENTS Section
PARTS LIST HT300U UNDERSLUNG. LIT NO: L940 DATE: January 2018 REVISION: B
PARTS LIST HT300U UNDERSLUNG LIT NO: L940 DATE: January 2018 REVISION: B Picture shown may not resemble all models. Wingless, weld-on frame bracket, welded alignment 3 2 1 2 ITEM DESCRIPTION PART NO. QTY.
TRUCK & TRAILER SUSPENSION PARTS CEDAR RAPIDS th Ave. S.W.
38 Order NLINE www.midwestwheel.com Midwest Wheel is Your Source for... CATALOG NUMBER TRUCK & TRAILER SUSPENSION PARTS TRUCK MIDWESTWHEEL.COM IOWA HAULMAAX DES MOINES 1436 E. Ovid Ave. office 515.265.1491
PARTS LIST INTRAAX AAT 23K, 25K, 30K, AAEDT 30K AND AANT 23K
PARTS LIST INTRAAX AAT 23K, 25K, 30K, AAEDT 30K AND AANT 23K LIT NO: L405 DATE: January 2002 REVISION: E TABLE OF CONTENTS SUSPENSION AND AXLE COMPONENTS...........................................2, 4,
PARTS LIST AAT230/250 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST AAT30/0 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 974-0 DATE: March 06 REVISION: A SECTION PAGE Introduction... Axle and Suspension Identification... 3 Axle ID Plate... 3 Suspension Assembly
PARTS LIST INTRAAX AAT 23K, 25K, 30K. LIT NO: L405 DATE: January 2018 REVISION: M
PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405 DATE: January 2018 REVISION: M INTRAAX AAT 23K, 25K, 30K PARTS LIST 16 5 6 8 15 15 11 13 16 8 Pedestal Components Detail (Call Hendrickson for assistance)
Trailer Suspension Series Configurations & Parts Identification
9700 Trailer Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n
TECHNICAL PROCEDURE HENDRICKSON AIR-RIDE SUSPENSIONS
TECHNICAL PROCEDURE HENDRICKSON AIR-RIDE SUSPENSIONS SUBJECT: Ride Height Settings LIT NO: L388 DATE: November 2003 REVISION: D The tables in this publication list the recommended or designed ride heights
For Technical Assistance, call Competition Engineering's Tech Line at (203) , 8:30am-5:00pm Eastern Time COMPETITION ENGINEERING
INSTALLATION INSTRUCTIONS C2099 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly clamps around
STANDARD SHAPES TROLLEY PARTS MANUAL
STANDARD SHAPES TROLLEY PARTS MANUAL, Unified Industries, Inc. All Rights Reserved. www.unified-ind.com PARTS AND REPAIR MANUAL This manual has been compiled to expedite the ordering of repair parts for
COMPETITION ENGINEERING. 80 Carter Drive P.O. Box 1470 Guilford, CT Phone: (203) Fax: (203)
INSTALLATION INSTRUCTIONS P/N: C2094 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly clamps
PARTS LIST TRAILER BRAKE SYSTEMS. LIT NO: DATE: October 2017 REVISION: H
PARTS LIST TRAILER BRAKE SYSTEMS LIT NO: 97-097 DATE: October 07 REVISION: H TABLE OF CONTENTS INTRODUCTION ABBREVIATIONS DRUM BRAKES & 6. DRUM FOUNDATION BRAKE HXS Brakes P-TYPE DRUM FOUNDATION BRAKE
49 AXLE CENTERS FOR 5 ROUND AXLES. Part FRONT HANGER STRADDLE MOUNT EQUALIZER BOLT 1-14 X 6-1/4
REYCO GRANNING MODEL 86/88 COMPONENTS 49 AXLE CENTERS FOR 5 ROUND AXLES Number Description 0046-20 FRONT HANGER STRADDLE MOUNT 12 00001-14 EQUALIZER BOLT 1-14 X 6-1/4 1 0084-00 FRONT HANGER UNDER MOUNT
Configurations & Parts Identification
900 TWS Trailer Suspension Series Configurations & Parts Identification Hutchens Industries Advancing the Practical Application of Suspension Technology Springfield, MO n (00) 654-24 n (41) 62-5012 Fax
Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
ELECTRIC HYDRAULIC PUMP
Form No. 10198 SPX Corporation 88 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 77-8326 Fax: (800) 76-8326 Order Entry: (800) 1-118 Fax: (800) 288-7031
Meritor CS9A Air Suspension
Meritor CSA Air Suspension Dim A Dim B 0 AM0SA Axle Assy c/w Bushed See Table Below Hanger Bracket Trailing Arms, Brake AM Shock Absorber Spiders & S Cams AM0 Shock Bolt - Upper AM Pivot Bushing AM00 Washer
Flange Mount (Fl/mt) Flange mount hangers may be welded or bolted to the frame, or a combination of bolting and welding may be used.
240 Fabricated (H) HUTCHENS H9700 and CH9700 SUSPENSIONS All 9700 series suspensions are available with either fabricated or cast steel hangers and rockers. These hangers come in various styles. Straddle
Suspension. Table of Contents
Suspension Table of Contents Sub-Headings Safety Notice 2 Explanation of Signal Words 2 Danger 2 2 Caution 2 Description 3 Preventive Maintenance 4 Shock Absorber 7 Visual Inspection 7 Heat Test 8 Steering
COMPETITION ENGINEERING. 80 Carter Drive P.O. Box 1470 Guilford, CT Phone: (203) Fax: (203)
INSTALLATION INSTRUCTIONS P/N S: C2090 & C2092 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly
This manual contains standard production Product Identification Numbers. Special Engineered Options not included.
P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. 45DV-MQ Full Freelift 4-Stage Opti-Vis Quad Mast FOR PARTS AND SERVICE: TELEPHONE:
Technical Procedure. SUBJECT: Operation, Maintenance and Retrofit Procedures. DATE: February 2018
Technical Procedure Trailer Suspension Systems QUIK-DRAW SUBJECT: Operation, Maintenance and Retrofit Procedures LIT NO: L738 DATE: February 2018 REVISION: C Van Applications (HK Series, VANTRAAX and ULTRAA-K
Parts Manual NEWAY BUS & MOTORHOME SUSPENSION
Parts Manual NEWAY BUS & MOTORHOME SUSPENSION 9 9 6 7 0 6A 6 7 0 9 * XL-PS07PM-en-US Rev A HOLLAND (AND FORMER NEWAY) BUS & MOTORHOME SUSPENSION PARTS REFERENCE GUIDE TABLE OF CONTENTS Truck, Bus & Motorhome
INSTALLATION INSTRUCTIONS P/N: C2094 SLIDE-A-LINK
INSTALLATION INSTRUCTIONS P/N: C2094 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly clamps
PARTS LIST. Reproduction. Not for. Models Mfg. No. Description Pico 6, SP 44cm Walk Behind, CE (2010)
PARTS LIST Models Mfg. No. Description 884142 Pico 6, SP 44cm Walk Behind, CE (2010) Manual Part No. 1739809 Revision B Rev. Date: 1/13/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handle, Controls
PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART Unverferth Manufacturing Co.,
INTRAAX AANLS 20K / AAL 23K / AAL 25K AAL 30K /AAEDL 30K
INTRAAX AANLS 20K / AAL 23K / AAL 25K AAL 30K /AAEDL 30K LIT NO: L72 DATE: March 2003 REVISION: B TABLE OF CONTENTS APPLICATIONS..............................................................2, 3, 4 Suspensions
mi Model 108 Compact Tractor Parts Catalog
mi Model 108 Compact Tractor Parts Catalog Catalog No. 1226 PRICE 75 CENTS CASE MODEL 108 COMPACT TRACTOR Parts Catalog No. 1226 Leitch 2500 9-72 "'^^^l" 1" ifif --C: ^1=5 t^dj d- CASE MODEL 108 COMPACT
HN FR Series Rear Suspension
Rear Suspension SUBJECT: Service Instructions LIT NO: 17730-285 DATE: December 2012 REVISION: A TABLE OF CONTENTS Section 1 Introduction........................ 2 Section 2 Product Description.................
Lycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
INSTALLATION INSTRUCTIONS P/N S: C2091 & C2093 SLIDE-A-LINK
INSTALLATION INSTRUCTIONS P/N S: C2091 & C2093 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly
800 SERIES 65K PARTS MANUAL
800 SERIES 65K PARTS MANUAL CHALMERS SUSPENSIONS INTERNATIONAL INC 6400 NORTHAM DRIVE MISSISSAUGA, ONTARIO, CANADA L4V 1J1 (905) 362-6400 PHONE (905) 362-6401 FAX Chalmers Suspensions 800 Series 65,0000
1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
INSTALLATION AND PARTS MANUAL
INSTALLATION AND PARTS MANUAL FOR JOHN DEERE PS TRACTORS NOTE: This manual covers mounting and control group installation, and parts specific to this winch on the specified tractor. For all other winch
Replacement Parts List FI 1509 & FI 1509C. SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017
Replacement Parts List 304-364 FI 1509 & FI 1509C SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017 FI 1509 FI 1509C FI 1509C REQUIRED BEARING FRAME J BEARING FRAME H BEARING FRAME J 1 1 Impeller
Hydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
HTB 210 for Spartan Motorhome Chassis
HTB 210 for Spartan Motorhome Chassis SUBJECT: Service Instructions LIT NO: 17730-261 DATE: May 2007 REVISION: A TABLE OF CONTENTS Section 1 Introduction..................... 2 Section 2 Product Description..............
Dana Spicer Steer Axles
Dana Spicer Steer Axles I Family D Family Illustrated Parts List AXIP-0090 November 2005 For the most current information, visit the Roadranger web site at www.roadranger.com Table of Contents Table of
TECHNICAL PROCEDURE HN/HNT 400/460 Truck & Trailer Suspension In Production: 11/88 9/96
PROCEDURE HN/HNT 400/460 Truck & Trailer Suspension In Production: 11/88 9/96 SUBJECT: Service Instructions LIT NO: DATE: April 1998 REVISION: B CONTENTS ITEM SUBJECT PAGE 1 Introduction... 2 2 Important
PARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MXH675, 6.5GT 19" High Wheel Self-Propelled Mower, CE (2010)
PARTS LIST Models Mfg. No. Description 881026 MXH675, 6.5GT 19" High Wheel Self-Propelled Mower, CE (2010) Manual Part No. 881128 Revision B Rev. Date: 11/20/2009 Table Of Contents PRODUCT COMPONENTS
HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies
12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right
Champion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP
l e s i MADE IN U.S.A. FOR HYDRAULIC w i t h ANS I B4 0. 1 Parts List for: SPX Hydraulic Technologies 5885 11th Street Rockford, IL 61109-3699 USA powerteam.com Tech Services: +1 800 477 8326 Fax: +1 800
Air / Hydraulic Floor Service Jack
SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
Parts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
Replacement Parts List FI 4007 & FI 4007D. SUPERSEDES: NEW EFFECTIVE: December 31, 2018
Replacement Parts List 304-572 FI 4007 & FI 4007D SUPERSEDES: NEW EFFECTIVE: December 31, 2018 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE FI 4007 BEARING FRAME J FI 4007D BEARING
KWIK-LOC TANDEM DOLLIE PARTS MANUAL CRAFTSMEN TRAILER, LLC. 2007
KWIK-LOC TANDEM DOLLIE PARTS MANUAL CRAFTSMEN TRAILER, LLC. 007 6 5 6 4 3 7 8 ITEM QTY. PART NO. DESCRIPTION 66300 HINGE 4 66308 HINGE BUSHING 3 6630 FRONT END 4 6630 EYE 5 66304 EYE BUSHING 6 5 6630 SNAP
East Manufacturing Corporation 1871 State Route 44 * P O Box 277 Randolph, Ohio Toll Free (800) Fax (330)
East Manufacturing Corporation 87 State Route * P O Box 77 Randolph, Ohio 65 Toll Free (800) 36-085 Fax (330) 35-835 Table of Contents Item Hendrickson T-5 / T7 / T0 Hendrickson HT-30- / 6 Hendrickson
Parts Manual. Field and Brush Mower. 16HP Tractors. 13.5HP Tractors. 13HP Tractors. 15HP Tractors
Parts Manual Field and Brush Mower.5HP Tractors Mfg. No. Description 20.5HP, Walk-Behind Brush Mower (Simplicity) 25.5HP, Walk-Behind Brush Mower (Ferris GM25H) 25.5HP, Walk-Behind Brush Mower (Giant-Vac
Model PL400 ITEM PART REQ'D PART ITEM NO. NO. NO. NO. DESCRIPTION REQ'D -2-
by PLUGR is a registered trademark of SourceOne Inc., a subsidiary of IMSCORP, Lincoln, NE. 603 L Street Lincoln, NE 68508 (888) 418-9065 Fax (402) 474-6604 Web Site: www.plugr.com Email: plugrsales@sourceonex.com
Shop Press. Maximum Capacity: 25 Tons and 55 Tons SAFETY PRECAUTIONS
Operating Instructions for: Form No. 102481 1826 1845 1846A 1847 1872 1872-220v 211200 576780 60361 61275 D01008AA D01009AA WARNING: To prevent personal injury; Shop Press Maximum Capacity: 25 Tons and
Illustrated Parts List
Spicer Steer Axles Illustrated Parts List Spicer EFA Family AXIP-0074 February 2008 Table of Contents Table of Contents Introduction...2 About this Parts Book...2 Abbreviations...2 Genuine Spicer Parts...2
- Rugged - Durable - Reliable - Versatile
HENDRICKSON Military Suspension Product Line - Rugged - Durable - Reliable - Versatile To learn more about Military Suspension Products, call 630.910.2800 or visit www.hendrickson-defense.com Across the
Form No , 3 4, 5 VALVE DETAIL DIVISION UNEX CORPORATION. Parts List for: HYTORC-115 HYTORC-230 HYTORC MODEL D ELECTRIC HYDRAULIC PUMP
> Parts List for: Form No. 105548 DIVISION UNEX CORPORATION 333 STATE ROUTE 17 NORTH MAHWAH, N.J. 07430-9895 Tel: (201) 512-9500 Fax: (201) 512-0530 HYTORC-115 HYTORC-230 HYTORC-230-2 MODEL D ELECTRIC
RideStar RHP Series Sliding Tandem Trailer Air Suspension System
Maintenance Manual 14S RideStar RHP Series Sliding Tandem Trailer Air Suspension System Revised 05-14 Service Notes About This Manual This manual provides the correct lubrication, service and installation