TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM

Size: px
Start display at page:

Download "TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM"

Transcription

1 Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer) or bottoming (1-2 thread chamfer). Tool Coating Also Available List No Machine Screw All sizes 12 each Sets (Taper Plug Bottom) Bold type indicates standard H limit. TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM H1 ⁵ ₁₆ 1⁵ ₈ H2 ⁵ ₁₆ 1⁵ ₈ H1 ³ ₈ 1¹¹ ₁₆ H2 ³ ₈ 1¹¹ ₁₆ H1 ³ ₈ 1¹¹ ₁₆ H2 ³ ₈ 1¹¹ ₁₆ H1 ⁷ ₁₆ 1³ ₄ H2 ⁷ ₁₆ 1³ ₄ H2 ⁷ ₁₆ 1³ ₄ H1 ¹ ₂ 1¹³ ₁₆ H2 ¹ ₂ 1¹³ ₁₆ H2 ¹ ₂ 1¹³ ₁₆ H2 ⁹ ₁₆ 1⁷ ₈ H2 ⁹ ₁₆ 1⁷ ₈ *36* 3 H2 ⁹ ₁₆ 1⁷ ₈ H1 ⁵ ₈ 1¹⁵ ₁₆ H2 ⁵ ₈ 1¹⁵ ₁₆ H2 ⁵ ₈ 1¹⁵ ₁₆ H1 ¹¹ ₁₆ H2 ¹¹ ₁₆ H3 ¹¹ ₁₆ H1 ¹¹ ₁₆ H2 ¹¹ ₁₆ H1 ³ ₄ 2¹ ₈ H2 ³ ₄ 2¹ ₈ H3 ³ ₄ 2¹ ₈ H2 ³ ₄ 2¹ ₈ H1 ⁷ ₈ 2³ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H1 ⁷ ₈ 2³ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H3 ¹⁵ ₁₆ 2³ ₈ H3 ¹⁵ ₁₆ 2³ ₈ *UNS

2 Optional Flutes and machine tapping in through holes or blind holes in a wide variety of materials. Optional Flutes taps feature fewer flutes than standard taps for added chip capacity in deeper hole tapping. List No Machine Screw All sizes 12 each Available in plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer). Bold type indicates standard H limit. TPI NO. OF DIA. THREAD EDP NUMBER SIZE UNC UNF FLUTES LIMIT LENGTH OAL PLUG BOTTOM H2 ⁷ ₁₆ 1³ ₄ H2 ⁹ ₁₆ 1⁷ ₈ H2 ⁵ ₈ 1¹⁵ ₁₆ H2 ¹¹ ₁₆ H3 ¹¹ ₁₆ H2 ¹¹ ₁₆ H2 ³ ₄ 2¹ ₈ H3 ³ ₄ 2¹ ₈ H2 ³ ₄ 2¹ ₈ H3 ³ ₄ 2¹ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H2 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ Surface Treated and machine tapping in through holes or blind holes in a wide variety of materials. Steam Oxide Surface Treatment increases wear resistance, reduces friction, acts as a lubricant, reduces galling and chip welding, improves chip flow and increases tap lubricant retention. NOT RECOMMENDED FOR NON-FERROUS MATERIALS. List No. 2068X Machine Screw Steam Oxide Treated All sizes 12 each Available in plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer) TPI NO. OF DIA. THREAD EDP NUMBER SIZE UNC UNF FLUTES LIMIT LENGTH OAL PLUG BOTTOM H3 ¹¹ ₁₆ H2 ¹¹ ₁₆ H3 ³ ₄ 2¹ ₈ H2 ³ ₄ 2¹ ₈ H3 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ morsecuttingtools.com 169

3 Titanium Nitride (TiN) Coated Straight Flute Hand Taps Titanium Nitride (TiN) Coating results in an extremely hard surface with high lubricity for increased tool life, improved thread quality, reduced torque and increased tapping speeds for greater productivity. List No. 2068G Machine Screw All sizes 12 each Available in plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer). TPI NO. OF DIA. THREAD EDP NUMBER SIZE UNC UNF FLUTES LIMIT LENGTH OAL PLUG BOTTOM H1 ⁵ ₁₆ 1⁵ ₈ H1 ³ ₈ 1¹¹ ₁₆ H1 ³ ₈ 1¹¹ ₁₆ H2 ⁷ ₁₆ 1³ ₄ H2 ⁷ ₁₆ 1³ ₄ H2 ¹ ₂ 1¹³ ₁₆ H2 ¹ ₂ 1¹³ ₁₆ H2 ⁹ ₁₆ 1⁷ ₈ H2 ⁹ ₁₆ 1⁷ ₈ * 3 H2 ⁹ ₁₆ 1⁷ ₈ H2 ⁵ ₈ 1¹⁵ ₁₆ H2 ⁵ ₈ 1¹⁵ ₁₆ H3 ¹¹ ₁₆ H2 ¹¹ ₁₆ H3 ³ ₄ 2¹ ₈ H2 ³ ₄ 2¹ ₈ H3 ⁷ ₈ 2³ ₈ H3 ⁷ ₈ 2³ ₈ H3 ¹⁵ ₁₆ 2³ ₈ H3 ¹⁵ ₁₆ 2³ ₈ *UNS SPECIAL TAPS FAST QUOTE SERVICE Call Morse Cutting Tools for all of your special tap needs. To expedite your quote please provide the following information: TAP SIZE CLASS of FIT or H LIMIT # of FLUTES TYPE of TAP SURFACE TREATMENT MATERIAL to be THREADED HARDNESS BLIND or THROUGH HOLE LENGTH of THREAD # of HOLES to TAP TAPPING EQUIPMENT USED CURRENT TAP USED TAPPING PROBLEM

4 Straight Flute Hand Taps Available in sets or taper (8-10 thread chamfer), plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer) Tool Coatings Also Available List No Fractional 1/4 thru 1/2 12 each 9/16 thru 3/4 3 each 7/8 thru 1¹ ₂ 1 each Sets (Taper Plug Bottom) Bold type indicates standard H limit. TPI NO. OF DIA. THREAD SETS EDP NUMBER SIZE UNC UNF FLUTES LIMIT LENGTH OAL EDP NO. TAPER PLUG BOTTOM ¹ ₄ 20 4 H1 1 2¹ ₂ H2 1 2¹ ₂ H3 1 2¹ ₂ H5 1 2¹ ₂ H1 1 2¹ ₂ H2 1 2¹ ₂ H3 1 2¹ ₂ H4 1 2¹ ₂ ⁵ ₁₆ 18 4 H2 1¹ ₈ 2²³ ₃₂ H3 1¹ ₈ 2²³ ₃₂ H5 1¹ ₈ 2²³ ₃₂ H2 1¹ ₈ 2²³ ₃₂ H3 1¹ ₈ 2²³ ₃₂ H4 1¹ ₈ 2²³ ₃₂ * ³ ₈ 16 4 H1 1¹ ₄ 2¹⁵ ₁₆ H2 1¹ ₄ 2¹⁵ ₁₆ H3 1¹ ₄ 2¹⁵ ₁₆ H5 1¹ ₄ 2¹⁵ ₁₆ H1 1¹ ₄ 2¹⁵ ₁₆ H2 1¹ ₄ 2¹⁵ ₁₆ H3 1¹ ₄ 2¹⁵ ₁₆ H4 1¹ ₄ 2¹⁵ ₁₆ ⁷ ₁₆ 14 4 H3 1⁷ ₁₆ 3⁵ ₃₂ H5 1⁷ ₁₆ 3⁵ ₃₂ H3 1⁷ ₁₆ 3⁵ ₃₂ H5 1⁷ ₁₆ 3⁵ ₃₂ ¹ ₂ 13 4 H1 1²¹ ₃₂ 3³ ₈ H3 1²¹ ₃₂ 3³ ₈ H5 1²¹ ₃₂ 3³ ₈ H1 1²¹ ₃₂ 3³ ₈ H3 1²¹ ₃₂ 3³ ₈ H5 1²¹ ₃₂ 3³ ₈ ⁹ ₁₆ 12 4 H3 1²¹ ₃₂ 3¹⁹ ₃₂ H5 1²¹ ₃₂ 3¹⁹ ₃₂ H2 1²¹ ₃₂ 3¹⁹ ₃₂ H3 1²¹ ₃₂ 3¹⁹ ₃₂ H5 1²¹ ₃₂ 3¹⁹ ₃₂ ⁵ ₈ 11 4 H2 1¹³ ₁₆ 3¹³ ₁₆ H3 1¹³ ₁₆ 3¹³ ₁₆ H5 1¹³ ₁₆ 3¹³ ₁₆ H2 1¹³ ₁₆ 3¹³ ₁₆ H3 1¹³ ₁₆ 3¹³ ₁₆ H5 1¹³ ₁₆ 3¹³ ₁₆ *Available While Supplies Last (continued) morsecuttingtools.com 171

5 (continued) List No Fractional EDP NUMBER TPI NO. OF DIA. THREAD SETS SIZE UNC UNF UNS FLUTES LIMIT LENGTH OAL EDP NO. TAPER PLUG BOTTOM ¹¹ ₁₆ 11 4 H3 1¹³ ₁₆ 4¹ ₃₂ H3 1¹³ ₁₆ 4¹ ₃₂ ³ ₄ 10 4 H3 2 4¹ ₄ H5 2 4¹ ₄ H1 2 4¹ ₄ H2 2 4¹ ₄ H3 2 4¹ ₄ H5 2 4¹ ₄ ⁷ ₈ 9 4 H4 2⁷ ₃₂ 4¹¹ ₁₆ H6 2⁷ ₃₂ 4¹¹ ₁₆ H2 2⁷ ₃₂ 4¹¹ ₁₆ H4 2⁷ ₃₂ 4¹¹ ₁₆ H4 2¹ ₂ 5¹ ₈ H6 2¹ ₂ 5¹ ₈ H4 2¹ ₂ 5¹ ₈ H4 2¹ ₂ 5¹ ₈ ¹ ₈ 7 4 H4 2⁹ ₁₆ 5⁷ ₁₆ H4 2⁹ ₁₆ 5⁷ ₁₆ ¹ ₄ 7 4 H4 2⁹ ₁₆ 5³ ₄ H4 2⁹ ₁₆ 5³ ₄ ³ ₈ 6 4 H4 3 6¹ ₁₆ H4 3 6¹ ₁₆ ¹ ₂ 6 4 H4 3 6³ ₈ H4 3 6³ ₈ Optional Flutes and machine tapping in through holes or blind holes in a wide variety of materials. Optional Flutes taps feature fewer flutes than standard taps for added chip capacity in deeper hole tapping. List No Fractional All sizes 12 each Ground Thread High Speed Steel TPI NO. OF THREAD EDP NUMBER SIZE UNC UNF FLUTES DIA. LIMIT LENGTH OAL PLUG BOTTOM ¹ ₄ 20 2 H3 1 2¹ ₂ H3 1 2¹ ₂ H5 1 2¹ ₂ H3 1 2¹ ₂ H3 1 2¹ ₂ ⁵ ₁₆ 18 2 H3 1¹ ₈ 2²³ ₃₂ H3 1¹ ₈ 2²³ ₃₂ H3 1¹ ₈ 2²³ ₃₂ ³ ₈ 16 3 H3 1¹ ₄ 2¹⁵ ₁₆ H3 1¹ ₄ 2¹⁵ ₁₆ ⁷ ₁₆ 14 3 H3 1⁷ ₁₆ 3⁵ ₃₂ H3 1⁷ ₁₆ 3⁵ ₃₂ ¹ ₂ 13 3 H3 1²¹ ₃₂ 3³ ₈ H3 1²¹ ₃₂ 3³ ₈

6 Titanium Nitride (TiN) Coated Titanium Nitride (TiN) Coating results in an extremely hard surface with high lubricity for increased tool life, improved thread quality, reduced torque and increased tapping speeds for greater productivity. List No. 2046G Fractional ¹ ₄ - ¹ ₂ 12 each ⁹ ₁₆ - ³ ₄ 3 each ⁷ ₈ each Ground Thread High Speed Steel THREAD NO. OF EDP NO. SIZE DIA. LIMIT LENGTH OAL FLUTES PLUG BOTTOM ¹ ₄ - 20 H3 1 2¹ ₂ ¹ ₄ - 28 H3 1 2¹ ₂ ⁵ ₁₆ - 18 H3 1¹ ₈ 2²³ ₃₂ ⁵ ₁₆ - 24 H3 1¹ ₈ 2²³ ₃₂ ³ ₈ - 16 H3 1¹ ₄ 2¹⁵ ₁₆ ³ ₈ - 24 H3 1¹ ₄ 2¹⁵ ₁₆ ⁷ ₁₆ - 14 H3 1⁷ ₁₆ 3⁵ ₃₂ ⁷ ₁₆ - 20 H3 1⁷ ₁₆ 3⁵ ₃₂ ¹ ₂ - 13 H3 1²¹ ₃₂ 3³ ₈ ¹ ₂ - 20 H3 1²¹ ₃₂ 3³ ₈ ⁹ ₁₆ - 12 H3 1²¹ ₃₂ 3¹⁹ ₃₂ ⁹ ₁₆ - 18 H3 1²¹ ₃₂ 3¹⁹ ₃₂ ⁵ ₈ - 11 H3 1¹³ ₁₆ 3¹³ ₁₆ ⁵ ₈ - 18 H3 1¹³ ₁₆ 3¹³ ₁₆ ¹¹ ₁₆ - 11 H3 2 4¹ ₄ ¹¹ ₁₆ - 16 H3 2 4¹ ₄ ³ ₄ - 10 H3 2 4¹ ₄ ³ ₄ - 16 H3 2 4¹ ₄ ⁷ ₈ - 9 H4 2⁷ ₃₂ 4¹¹ ₁₆ ⁷ ₈ - 14 H4 2⁷ ₃₂ 4¹¹ ₁₆ H4 2¹ ₂ 5¹ ₈ H4 2¹ ₂ 5¹ ₈ Oversize Oversize (H11) taps are mainly used for parts that will be plated or heat treated after tapping. Also used in materials that tend to shrink after tapping. Taraud surdimensionné List No Machine Screw & Fractional Machuelo de roscar extra grande Machine screw sizes: 12 each Fractional sizes: 1/4 thru 1/2 12 each 5/8 3 each Plug Style List No Machine Screw TPI DIA. THREAD NO. OF EDP NO. SIZE UNC UNF LIMIT LENGTH OAL FLUTES PLUG 6 32 H11 ¹¹ ₁₆ H11 ³ ₄ 2¹ ₈ H11 ⁷ ₈ 2³ ₈ H11 ⁷ ₈ 2³ ₈ List No Fractional TPI DIA. THREAD NO. OF EDP NO. SIZE UNC UNF LIMIT LENGTH OAL FLUTES PLUG ¹ ₄ 20 H11 1 2¹ ₂ ⁵ ₁₆ 18 H11 1¹ ₈ 2²³ ₃₂ ³ ₈ 16 H11 1¹ ₄ 2¹⁵ ₁₆ ¹ ₂ 13 H11 1²¹ ₃₂ 3³ ₈ ⁵ ₈ 11 H11 1¹³ ₁₆ 3¹³ ₁₆ DIA. LIMIT AMOUNT LARGER THAN BASIC DIA. H "-.0055" morsecuttingtools.com 173

7 Eight Pitch Eight Pitch taps are often required for applications in the power generation industry and general construction. List No Fractional All sizes 1 each Available in taper (8-10 thread chamfer), plug (3-5 chamfer), or bottoming (1-2 thread chamfer) NO. OF DIA. THREAD EDP NO. SIZE TPI FLUTES LIMIT LENGTH OAL TAPER PLUG BOTTOM H4 2Z\x 5Z\, ¹ ₈ 8 4 H5 2>\zn 5M\zn ¹ ₄ 8 4 H5 2>\zn 5C\v ³ ₈ 8 4 H5 3 6Z\zn ¹ ₂ 8 6 H5 3 6C\, ⁵ ₈ 8 6 H6 3C\zn 6ZZ\zn ³ ₄ 8 6 H6 3C\zn ⁷ ₈ 8 6 H6 3>\zn 7B\zn H6 3>\zn 7B\, ¹ ₈ 8 6 H6 3>\zn ¹ ₄ 8 6 H6 3>\zn 8Z\v ³ ₈ 8 6 H6 4 8Z\x ¹ ₂ 8 6 H6 4 8C\v ⁵ ₈ 8 6 H8 4 8C\v ³ ₄ 8 6 H8 4 9Z\v ⁷ ₈ 8 6 H8 4 9Z\v H8 4>\zn 9C\v Surface Treated Steam Oxide Surface Treatment increases wear resistance, reduces friction, acts as a lubricant, reduces galling and chip welding, improves chip flow and increases tap lubricant retention. NOT RECOMMENDED FOR NON-FERROUS MATERIALS. List No. 2046X Fractional Steam Oxide Treated 1/4 thru 1/2 12 each 5/8 thru 3/4 3 each Available in plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer) TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL PLUG BOTTOMING ¹ ₄ 20 4 H3 1 2¹ ₂ H3 1 2¹ ₂ ⁵ ₁₆ 18 4 H3 1¹ ₈ 2²³ ₃₂ H3 1¹ ₈ 2²³ ₃₂ ³ ₈ 16 4 H3 1¹ ₄ 2¹⁵ ₁₆ H3 1¹ ₄ 2¹⁵ ₁₆ ¹ ₂ 13 4 H3 1²¹ ₃₂ 3³ ₈ H3 1²¹ ₃₂ 3³ ₈ >\zn 12 4 H3 1²¹ ₃₂ 3Z>\cx H3 1²¹ ₃₂ 3Z>\cx ⁵ ₈ 11 4 H3 1¹³ ₁₆ 3¹³ ₁₆ H3 1¹³ ₁₆ 3¹³ ₁₆ ³ ₄ 10 4 H3 2 4¹ ₄ H3 2 4¹ ₄

8 For Cast Iron Steam Oxide Over Nitride Taps for Cast Iron feature specific geometry and a wear resistant surface finish for tapping materials that produce small or powdery chips. Recommended for cast iron, cast brass and other brass materials and non-metals that produce small or powdery chips. List No Machine Screw & Fractional List No Machine Screw & Fractional List No. 2021M Metric. Available in plug (3-5 chamfer) and bottoming (1-2 thread chamfer) THREAD NO. OF THREAD EDP NO. EDP NO. SIZE TYPE DIA. LIMIT FLUTES LENGTH OAL PLUG BOTTOM NC H3 4 7/8 2-3/ NF H3 4 7/8 2-3/ /4-20 NC H / /4-28 NF H / /16-18 NC H /8 2-23/ /16-24 NF H /8 2-23/ /8-16 NC H /4 2-15/ /8-24 NF H /4 2-15/ /16-14 NC H /16 3-5/ /16-20 NF H /16 3-5/ /2-13 NC H /32 3-3/ /2-20 NF H /32 3-3/ /16-12 NC H / / /16-18 NF H / / /8-11 NC H / / /8-18 NF H / / /4-10 NC H / /4-16 NF H / List No. 2021M Metric NO. OF THREAD EDP NO. EDP NO. SIZE DIA. LIMIT FLUTES LENGTH OAL PLUG BOTTOM M6 1 D / M D /8 2-23/ M D /4 2-15/ M D /32 3-3/ MORSE Modifications & Specials Complete Tool Design And Manufacturing Services From Blueprint Specials to Modified Regulars morsecuttingtools.com 175

9 Metric Straight Flute Hand Taps and machine tapping in through holes or blind holes Available in sets or taper (8-10 thread chamfer), plug (3-5 thread chamfer), or bottoming (1-2 thread chamfer). List No M1.6 thru M12 12 each M14 thru M16 3 each M18 thru M39 1 each Sets (Taper, Plug, Bottom) DIA. NO. OF THREAD SETS EDP NO. SIZE LIMIT FLUTES LENGTH OAL EDP NO. Taper PLUG BOTTOM M D3 2 ⁵ ₁₆ 1⁵ ₈ M D3 2 ³ ₈ 1¹¹ ₁₆ M2 0.4 D3 3 ⁷ ₁₆ 1³ ₄ M D3 3 ⁷ ₁₆ 1³ ₄ M D3 3 ¹ ₂ 1¹³ ₁₆ M3 0.5 D3 3 ⁵ ₈ 1¹⁵ ₁₆ M D4 3 ¹¹ ₁₆ M4 0.7 D4 4 ³ ₄ 2¹ ₈ M D4 4 ⁷ ₈ 2³ ₈ M5 0.8 D4 4 ⁷ ₈ 2³ ₈ M6 1 D ¹ ₂ M7 1 D5 4 1¹ ₈ 2²³ ₃₂ M8 1 D5 4 1¹ ₈ 2²³ ₃₂ *M D5 4 1¹ ₈ 2²³ ₃₂ M D5 4 1¹ ₄ 2¹⁵ ₁₆ *M D6 4 1¹ ₄ 2¹⁵ ₁₆ M D5 4 1²¹ ₃₂ 3³ ₈ *M D6 4 1²¹ ₃₂ 3³ ₈ M D6 4 1²¹ ₃₂ 3¹⁹ ₃₂ *M14 2 D7 4 1²¹ ₃₂ 3¹⁹ ₃₂ M D6 4 1¹³ ₁₆ 3¹³ ₁₆ *M16 2 D7 4 1¹³ ₁₆ 3¹³ ₁₆ M D6 4 1¹³ ₁₆ 4¹ ₃₂ *M D7 4 1¹³ ₁₆ 4¹ ₃₂ M D ¹⁵ ₃₂ *M D ¹⁵ ₃₂ M D6 4 2⁷ ₃₂ 4¹¹ ₁₆ *M D7 4 2⁷ ₃₂ 4¹¹ ₁₆ M24 2 D7 4 2⁷ ₃₂ 4²⁹ ₃₂ *M24 3 D8 4 2⁷ ₃₂ 4²⁹ ₃₂ M27 2 D7 4 2¹ ₂ 5¹ ₈ *M27 3 D8 4 2¹ ₂ 5¹ ₈ M30 2 D7 4 2⁹ ₁₆ 5⁷ ₁₆ *M D9 4 2⁹ ₁₆ 5⁷ ₁₆ M33 2 D7 6 2⁹ ₁₆ 5³ ₄ *M D9 4 2⁹ ₁₆ 5³ ₄ 38175** M36 3 D ¹ ₁₆ *M36 4 D ¹ ₁₆ M39 3 D8 6 3³ ₁₆ 6¹¹ ₁₆ 38239** 38179** *M39 4 D9 6 3³ ₁₆ 6¹¹ ₁₆ 38180** 38040** 38140** Pitch diameters are those recommended for 6H class of thread. **Designates course pitch **Available while supplies last

List No STANDARD All sizes 1 each

List No STANDARD All sizes 1 each Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.

More information

SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.

SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO. Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity

More information

TAPS AND DIES. American Made American Owned

TAPS AND DIES. American Made American Owned TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut

More information

List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute

List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3

More information

Table of Contents. Standard Taps

Table of Contents. Standard Taps Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw

More information

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design

More information

SPIRAL POINT TAPS for through hole tapping

SPIRAL POINT TAPS for through hole tapping SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the

More information

TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES

TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall

More information

Table of Contents. Standard Taps

Table of Contents. Standard Taps Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw

More information

member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162

member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162 Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage

More information

Tap and Drill Bit Selection Guide

Tap and Drill Bit Selection Guide 148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard

More information

2017 NORTH AMERICA TAPS EDITION

2017 NORTH AMERICA TAPS EDITION 2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,

More information

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) ** System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole

More information

Threading tools to JIS standard

Threading tools to JIS standard Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating

More information

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr

More information

No. of Holes. Drill Dia. (in.)

No. of Holes. Drill Dia. (in.) UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast

More information

P&N/SUTTON. A trusted name, serving Canadian industries since

P&N/SUTTON. A trusted name, serving Canadian industries since /SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)

More information

8 to 10 threads chamfered for easy thread starting in tough material.

8 to 10 threads chamfered for easy thread starting in tough material. TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is

More information

Drills Manufactured to National Aerospace Standards (NAS)

Drills Manufactured to National Aerospace Standards (NAS) Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

Introduction. Sparkplug / Plugsaver Kits

Introduction. Sparkplug / Plugsaver Kits RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip

More information

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page

More information

Hand Taps For Through or Blind Holes in General Machining Applications

Hand Taps For Through or Blind Holes in General Machining Applications TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes Taper Chamfer 7 to 10 itches Series

More information

Conversion Factors 1

Conversion Factors 1 Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips

More information

Air/Gas Vents For automatically venting gases from liquids under pressure. Bulletin No. 451-E

Air/Gas Vents For automatically venting gases from liquids under pressure. Bulletin No. 451-E ir/gas Vents For automatically venting gases from liquids under pressure. ulletin No. 451-E Selecting The rmstrong ir/gas Vent With the desired CFM capacity known, find the orifice size required from the

More information

Taps, Dies & Threading

Taps, Dies & Threading Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

Specializing In High Performance Solid Carbide Cutting Tools

Specializing In High Performance Solid Carbide Cutting Tools Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form. MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING

More information

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number *Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose

More information

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

More information

"IMCO" SOLID CARBIDE CUTTING TOOLS - USA

IMCO SOLID CARBIDE CUTTING TOOLS - USA "IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC

More information

TWIST DRILLS AND COUNTERBORES

TWIST DRILLS AND COUNTERBORES TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting

More information

CMT Vertical Mill-Thread

CMT Vertical Mill-Thread CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground

More information

Carbide Drills When productivity matters - Stub 1. to Long 1

Carbide Drills When productivity matters - Stub 1. to Long 1 CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill

More information

PRECISION THREADING TECHNOLOGY

PRECISION THREADING TECHNOLOGY PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most

More information

DRILL INSERTS & HOLDERS

DRILL INSERTS & HOLDERS DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts

More information

INDEX. Wolferal Saw & Tool Selection Manual The Jones Tool Co Ltd Introduction. Our 58th YEAR

INDEX. Wolferal Saw & Tool Selection Manual The Jones Tool Co Ltd Introduction. Our 58th YEAR Wolferal Saw & Tool Selection Manual 2007 INDEX Our 58th YEAR Characteristics of Cutting Steels and Saw Tooth Forms 2-3 Wolferal Premium Quality Cutting-Off Saw Blades 4-14 Wolferal Cutting Performance

More information

New Mini Tools Inch 2016

New Mini Tools Inch 2016 TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer

More information

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page... group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

More information

P: F:

P: F: TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either

More information

COATING SELECTION CHART

COATING SELECTION CHART On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,

More information

Body Length (mm) New Tool Ref Length (mm)

Body Length (mm) New Tool Ref Length (mm) 3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *

More information

10,000 Series. Highlights C-6

10,000 Series. Highlights C-6 Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb

More information

Mill - Thread Inserts and Kits

Mill - Thread Inserts and Kits Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand

More information

New Tool Ref Length (mm) Body Length (mm)

New Tool Ref Length (mm) Body Length (mm) 4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill

More information

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on

More information

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2

More information

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173 T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

ITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW

ITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW TAPER 8 to 10 threads chamfered for easy thread starting in tough materia. PLUG BOTTOMING 3 to 5 threads chamfered for genera use when tapping to bottom of hoe is not critica. This is the most popuar tap

More information

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by

More information

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide

More information

ThreadMill. For Thread Milling

ThreadMill. For Thread Milling ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting

More information

HIGH PERFORMANCE BUTTERFLY VALVE

HIGH PERFORMANCE BUTTERFLY VALVE Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications

More information

Model 8. Power Wheel. Planetary Gear Drive

Model 8. Power Wheel. Planetary Gear Drive Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft

More information

Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2

Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2 & - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best

More information

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1 Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank

More information

Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified

Solid Carbide Tools. Drilling Solutions. New Expanded Offering.   ISO 9001 Certified Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling

More information

PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE

PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438

More information

UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.

UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g. ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)

More information

ADJUSTABLE PITCH SERIES

ADJUSTABLE PITCH SERIES ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available

More information

Slugger Core Drilling Units Slugger System Expertise QuickIN System HSS Annular Cutters Carbide Cutters Accessories

Slugger Core Drilling Units Slugger System Expertise QuickIN System HSS Annular Cutters Carbide Cutters Accessories Slugger Metal Core Drilling User-oriented solutions from the specialist Slugger Core Drilling Units Slugger System Expertise QuickIN System HSS Annular Cutters Carbide Cutters Accessories CONTENTS Table

More information

TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length

TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length C SERIES HREADMIING hreadmilling Insert Nomenclature Chart I 15 N 8 UN I threadmilling insert insert length type of insert N P 75.750 (19.05) 1 1.000 (25.40) 1.5 1.500 (38.10) hreadmilling Cutter Nomenclature

More information

BELL, SCOTT & CO. LTD.

BELL, SCOTT & CO. LTD. Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable

More information

NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.

NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE. NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO

More information

Newest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!

Newest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform! Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point

More information

Shark Line Material specific application taps

Shark Line Material specific application taps Shark Line Material specific application taps 2018 SHARK LINE SHARK MATERIAL SPECIFIC APPLICATION TAPS INTRODUCTION Our material specific application-based range of DIN Shark Taps offer high performance

More information

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable

More information

LEADER CORPORATION CATALOG

LEADER CORPORATION CATALOG LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby

More information

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:

More information

THREADED INSERTS.

THREADED INSERTS. www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6

More information

HY-PRO AERO-F Inch & Metric Plug (4P-5P)

HY-PRO AERO-F Inch & Metric Plug (4P-5P) HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

CERATIZIT designation system

CERATIZIT designation system C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,

More information

PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG

PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN

More information

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501

More information

NIAGARA CUTTER THREAD MILLING THREAD MILLS

NIAGARA CUTTER THREAD MILLING THREAD MILLS NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD

More information

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs

More information

ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加

ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加 超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm

More information

Intelligent Drivesystems NORD GRIPMAXX. Keyless Bushing System DRIVESYSTEMS F5210

Intelligent Drivesystems NORD GRIPMAXX. Keyless Bushing System DRIVESYSTEMS F5210 Intelligent Drivesystems NORD GRIPMAXX Keyless Bushing System F5210 The NORD GRIPMAXX Keyless Bushing System Concept Overview The NORD Gripmaxx Bushing System offers keyless interchangeable bushings for

More information

Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.

Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description. Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical

More information

Thread and Connector Identification

Thread and Connector Identification How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese

More information

PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES, AND FABRICATION TOOLS

PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES, AND FABRICATION TOOLS Magnetic Drills Page 3 Rotabroach Cutters Page 15 Electro-Hydraulic Hole Punchers Page 26 PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES, AND FABRICATION TOOLS Volume 13 www.hougen.com this year!

More information

Index. H&O DIE SUPPLY, INC Ejector Pins-Nitrided-Parallel-Inch. Ejector Pins-Nitrided-Parallel-Metric

Index. H&O DIE SUPPLY, INC Ejector Pins-Nitrided-Parallel-Inch. Ejector Pins-Nitrided-Parallel-Metric Index B2 B12 Ejector Pins-Nitrided-Parallel-Inch Ejector Pins-Nitrided-Parallel-Metric B19 B13 D-HeadEjector Pins Ejector Pins-Nitrided-Shoulder-Metric B3 B14 Ejector Pins-Nitrided-Shoulder-Inch Ejector

More information

~ MHDG-CCP MHDG Impulse Enterprise, Inc. MINIATURE HIGH DENSITY SERIES STAINLESS STEEL .56 DELRIN WASHER 1.51

~ MHDG-CCP MHDG Impulse Enterprise, Inc. MINIATURE HIGH DENSITY SERIES STAINLESS STEEL .56 DELRIN WASHER 1.51 MHDG.. DIA. MHDG-CCP NEOPRENE/ DELRIN WASHER.. MHDG-CCP-RA NAVAL BRONZE MHDG-CCP. 00-H MHDG-CCR ALIGNMENT KEY -0 (SEE DETAIL A)....00 DIA -0.0-0 MHDG-BCR.. HEX - /- UNF-A DETAIL A Technical Bulletin 0-00--0

More information

ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool

ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool 1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10

More information

COOLANT-FED TOOLING & SYSTEMS

COOLANT-FED TOOLING & SYSTEMS V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL

More information

INNOVATIONS CATALOGUE

INNOVATIONS CATALOGUE INNOVATIONS CATALOGUE 2015 1 Since its inception in 1938, Kennametal has understood precisely how to improve manufacturing performance and profitability by introducing unparalleled products and services

More information

Lubrication Fittings. 1/4"-28 Taper Thread Fittings

Lubrication Fittings. 1/4-28 Taper Thread Fittings 1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having

More information

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended

More information

Rotary Cutting Tools Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.

Rotary Cutting Tools Metric.  ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A. Rotary Cutting Tools 200 Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. TABLE OF CONTENTS CATEGORY PAGE # Endmill Data 2 Terms & Conditions 3 Materials Index 3 Milling Procedures

More information

AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY

AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical

More information

80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE

80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE 3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800

More information