NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
|
|
- Jonah Hensley
- 6 years ago
- Views:
Transcription
1 NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO OR NOGO THREAD PLUG GAUGE WILL BE AT 60% OF DOUBLE ENDED THREAD PLUG GAUGE. 5) PRICES FOR SINGLE ENDED GO OR NOGO THREAD PLUG WILL BE AT 60% OF DOUBLE ENDED THREAD PLUG GAUGE 6) PRICE FOR DOUBLE ENDED CHECK PLUG GAUGES ADD 50% ON THE CORRESPONDING STANDARD PRICE OF THE THREAD PLUG GAUGE. 7) FOR ANY CLASS OF FIT OTHER THAN MEDIUM ADD TO THE BASIC LIST PRICE. FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE. FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24MM 40% 9) PRICE FOR GAUGES NOT COVERED IN THIS PRICE LIST ARE WEAR CHECK PLUGS.WEAR CHECK RING,TRAPEZOIDAL, BUTTRESS, ACME, PG, BS. CONDUIT OR SPECIAL GAUGES AS PER YOUR DRAWINGS WHICH WILL BE QUOTATED ON REQUEST. ADDITIONAL INFORMATION FOR KIND REF TRADE COMBINE VAT TIN NO V W.E.F. 1/04/2006 CST TIN NO C W.E.F. 1/04/2006 TERMS AND CONDITIONS PRICES : EX-OUR WORKS, MUMBAI. SALES TAX : EXTRA AS APPLICABLE THE TIME OF DELIVERY PACKING AND FORWARDING : MODE OF DISPATCH : BY ROAD TRANSPORT OR COURIER. FREIGHT : EXTRA AT ACTUAL. PAYMENT : 100% ADVANCE AGAINST PROFORMA INVOICE. 0
2 Nominal Diameter Pitch Trade Combine MASTER METROLOGY / SYSTEMS ISO METRIC THREAD GAUGES INDIAN STANDARD BASIC DIMENSIONS IS : 4218 PART III IS : 4218 PART IV GAUGING PRACTICE IS : INTERNATIONAL ORGANISATION FOR STANDARDISATION (ISO) BASIC DIMENSIONS ISO : (E) ISO : 965/ (E) GAUGING PRACTICE ISO : (E) Thread Plug Double - End GO & NOGO 6H Thread Rings GO OR NOGO 6g P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A
3
4
5 Nominal Diameter UNIFIED THREAD GAUGES BRITISH STANDARD Basic Dimensions B.S Gauging practice:b.s.919. Part 1/1960 AMERICAN STANDARD Basic Dimensions:ANSI/ASME B Gauging Practice:ANSI/ASME B Class Of Fit :Plugs :2B (Medium),Rings :2A (Medium) Note :In absence of instructions on Standards, We manufacture as per American Standards Pitch Thread Plug Double - End GO & NOGO Thread Rings GO Or NOGO 1" 8UNC UNF UNEF /8" 7UNC UNC UNC UNC UNF /4" 7UNC UNC UN UNF UNF UNC UN UNF /8" 6UNC UNC UN UNF UN UNC UN UNF /2" 6UNC UNC UN UNF UNF /4" 20UNC UNF UNF /8" 8UN /16" 18UNC UN UNF UN /8" 16UNC /4" 5UNC UNF UN /16" 14UNC UN UNF UN /2" 13UNC /8" 8UN UNF UN /16" 12UNC UN UNF " 4.5UNC /8" 11UNC UN UNF UN /4" 10UNC UN UNC /4" 4.5UNC UNEF UN /8" 9UNC UN UNF UN UNEF
6 2.3/8" 8UN B.A.THREAD GAUGES 12UN Basic Dimensions B.S UN Gauging Practice B.S919,Part1, /2" 4UNC UN Thread Plug Double 12UN Size end GO & NOGO 16UN BA /8" 8UN BA UN BA UN BA /4" 4UNC BA UN BA UN BA UN /8" 8UN BRITISH STANDARD WITHWORTH 12UN FORM THREAD GAUGES 16UN " 4UNC Basic Dimensions B.S UN Gauging Practice B.S.919, Part III, UN Thread Ring GO Or NOGO 16UN Nominal Pitch Thread Plug 3.1/4" 4UNC 8UN Double - End GO&NOGO 12UN /8" 40BSW UN /16" 24BSW /2" 4UNC BSF UN /4" 20BSW UN BSF UN /16" 18BSW /4" 4UNC BSF UN /8" 16BSW /4" 12UN BSF UN /16" 14BSW " 4UNC BSF UN /2" 12BSW UN BSF /8" 11BSW BSF /4" 10BSW BSF /8" 9BSW BSF " 8BSF BSF Thread Rings GO or NOGO 5
7 Nominal Pitch Thread Plug Double -End GO & NOGO RS. B.S.P THREAD GAUGES (G-Series) Basic Dimensions B.S , ISO 228 Part1-1982(E) Gauging Practice B.S.919,Part II,1971, IS: ISO228 Part II-1987 Class of Fit: Screw Plugs: General. Screw Rings : General (B), Close (A) Screw Rings are generally Manufactured to Class B unless otherwise specified. Thread Rings GO OR NOGO RS G G1.1/8" G1.1/4" G 1/16" G1.3/8" G 1/8" G1.1/2" G 1/4" G2" G 3/8" G2.1/2" G 1/2" G3" G 5/8" G4" G 3/4" G5" G 7/8" G6" Nominal TPI Thread Plug Plug 'RC' RS. R/RC (BSPT) TAPER THREAD GAUGES Standards : Basic Dimensions :BS 21:1985, IS: Class of Fit :System B for both screw Rings and screw Plugs Thread Rings Ring R RS 1.1/4" /2" " /16" /2" /8" " /4" " /8" " /2" " /4" " N.P.T TAPER THREAD GAUGES Basic Dimension and gauging Practice :ANSI / ASME B Class of Fit: Basic /Step-limit. Size T.P.I Thread Plug Thread Rings 1.1/4" 11.1/ L1 L1 L1 L1 1.1/2" 11.1/ Min/Max Basic Min/Max 2" 11.1/ Step RS Step RS Step RS 2.1/2" Basic Step RS 1/16" " /8" /2" /4" " /8" /2" /2" " /4" " " 11.1/
8 N.P.T.F. THREAD GAUGES Basic Dimension& Gauging Practice to ANSI / ASME B1.20.6/1984B Class of Fit :Basic / Step-limit Size T.P.I. PLUGS RINGS L1 L1 L3 L3 L1 L1 L2 L2 Basic Rs Step-limit Rs Basic Rs Step-limit Rs Basic Rs Step-limit Rs Basic Rs Step-limit Rs 1/16" /8" s /4" /8" /2" /4" " 11.1/ /4" 11.1/ /2" 11.1/ " 11.1/ /2" " /2" " Size 3/4" 14NGT L1 Gauge'B' Rs. N.G.T. TAPER THREAD GAUGES Plug Gauges B.S. CYCLE THREAD GAUGES Standards :Basic Dimensions IS :3224:1979 Standards : Basic Dimensions : B.S Gauging Practice :IS:9121:1979 Gauging Practice :BS 919 Part 2:1971 Nominal Pitch Diameter PLUG L9 Gauge A Rs. Check Plugs For L1 & L8 Gauge M Rs. Thread Plug Double-End GO & NOGo 6H Rs Thread Rings Go Or NOGO 6g Rs Plain Taper Plug Gauge 7/32" Gauge C1 Rs. Gauge C2 Rs. 1/4" /32" /16" Ring Gauges 3/8" Size L1Gauge 'E' Rs L8 Gauge 'D' Rs Crest Truncation Plain Ring Gauge 'F' Rs 7/16" /4"14NGT /2" /16" /8" /16" /4" "
9 ADJUSTABLE SNAP GAUGE TYPE 'C' DIAL SNAP GAUGE (WITHOUT DIAL) Ranges in mm Price Ranges in mm Price Range in mm Price 0-6 RS.2470/ RS.3965/ RS.11765/ RS.2600/ RS.3965/ RS.13195/ RS.2600/ RS.4420/ RS.13780/ RS.2600/ RS.4485/ RS.15340/ RS.3055/ RS.4485/ RS.17615/ RS.3055/ RS.4550/ RS.18850/ RS.3055/ RS.8125/ RS.22815/ RS.3055/ RS.8125/ RS.24830/ RS.3055/ RS.9100/ RS.28340/ RS.3055/ RS.9100/ RS.36660/ RS.3380/ RS.10010/ RS.42835/ RS.3380/ RS.10010/ RS.48945/ RS.3510/ RS.11440/ RS.3510/ RS.11440/ RS.3510/ RS.12025/ RS.3510/ RS.12025/ RS.3965/ RS.13780/ RS.3965/ RS.13780/- PLAIN PLUG GAUGE TYPE SIZE(mm) PRICE TYPE SIZE(mm) PRICE REVERSIBLE PIN TYPE ABOVE 65 DIA S.E. GO & NOGO SETS BS :1044 part or CS IS: SIZE(MM) PRICE _ _ TAPER LOCK SIZE(mm) PRICE _ IS: D.E GAUGE MFG TOL IS : OR BS: MASTER SETTING DISCS (IS: ) 8
10 KEY WAY WIDTH GAUGES (SIZE 40 X 9 mm) SLIP GAUGES (TOL:0.005) SNAP GAUGES FIXED TYPE (SIZE 40 X 9 mm) SIZE (mm) PRICE SIZE (mm) PRICE TYPE SIZE(mm) S/E D/E Plate Type S/E snaps IS: D.E Snaps IS: , ,391 MASTER SETTING RING GAUGES ,255 1,762 SIZE(mm) PRICE SIZE(mm) PRICE ,482 1, , , , , , , , , , FOR GROOVE DIA CHECKING GAUGES CONSIDER DOUBLE CHARGES OF ABOVE PRICES Price for Go &No go ring set will be two times of MSR MSR BLANKS AS PER IS: GAUGING PRACTICE AS PER IS:
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
More informationAccuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
More information(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
More informationPLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
More informationLEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationTOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
More informationList Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
More informationProduct features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationTHREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationD24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
More informationCALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
More informationQuotation. Catalog Page - 3 Page - 3 Page - 3 Page - 3
Quotation 70 Right Angle / Tri Square - Grade - I Size ( L x W x T ) mm Disc % 100 x 70 x 10 150 x 100 x 12 200 x 140 x 15 250 x 165 x 20 300 x 200 x 20 Crystal Rs. 4 2020 2300 4550 5150 6470 Code AA-2701
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationIntroduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationMINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
More informationConversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
More informationmember sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationNIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
More informationMEET OUR TEAM. North American Tool Corporation 215 Elmwood Avenue, PO Box 116, South Beloit, IL CURTIS LANSBERY PRESIDENT & CEO
MEET OUR TEAM CURTIS LANSBERY PRESIDENT & CEO BRIAN KOBISCHKA VICE PRESIDENT & CFO PHIL SAMUELS DIRECTOR OF SALES & MARKETING JEFF SHERMAN DIRECTOR OF MANUFACTURING JON ANDERSON JOY BALDWIN BARB BISHOP
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationturning and milling tools
turning and milling tools threading grooving boring threading solutions METR WHAT S helicool family Helicool Helical Flutes with Thru-hole coolant in this catalog NEW SOID CARBIDE TOOS Helicool-R (HCR)
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More informationPRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Product Tensile Strength Property Class Diameter Size Range Length Evaluant Standard Psi Min N/mm Metric Inch* Metric Inch* IS ISO DIN BS ANSI JIS Hex Head Bolts/Screw 800/830 (8.8),0
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationPAGETWO ten line telephone: Amend 1-1 January 1997
Conditions of Sale Amend 1-1 January 1997 1. Introduction These Conditions shall apply to all sales of goods by the Company to exclusion of all other terms, conditions and warranties. The Company shall
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationIECEx Certificate of Conformity
Annex Page 1 of 8 Equipment: The E** series Type ranges of cable glands consist of a male-threaded front entry component containing an elastomeric sealing ring and a Nylon 6 skid washer which effect flameproof
More informationQuadThread. Internal. For Thread Turning
QuadThread Internal For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-03 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Our products are sold through distributors
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More informationTESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-08 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More informationGraphic Symbol 100 L 140 G25. R -M V 4 4 G P E. Perm.* 2 Magnet. Differential Pressure P. Connection. R: BSP.F Thd. O: Not Fitted.
ollowing are the Accessories used in the Hydraulic Systems iller Breather Model Code Method of Representation: According to Model Code in the above table. Suction Strainer Model Code SS 15 evel Gauge iltration
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationVARIATIONS IN EQUIPMENT HOW TO SELECT EXAMPLE FOR ORDERING TYPE
VARIATIONS IN EQUIPMENT Material Stainless and acidproof steel Aluminium alloys Various combinations of material Seals for elevated temperatures Surface finish Lacquered Chemi-nickel coating On customer's
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationPRECISION THREADING TECHNOLOGY
PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most
More informationCOARSE SIZE. Suitable for all high tensile applications. PITCH (mm)
QUICK PRDUCT SELECTIN GUIDE THREAD SIZE CMPARISIN PRDUCT SCKET HEAD CAP SCKET CUNTER SUNK HEAD SCKET BUTN HEAD CAP SCKET SET (KNURLED CUP PINT) SCKET HEAD SHULDER HARDNESS Hrc 39-44 Hrc 39-44 Hrc 39-44
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationLubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
More informationSINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationQuadCut. External. For Thread Turning
QuadCut External For Thread Turning Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationWhite House Products Ltd
White House Products Ltd Issue 5 - Section 23 To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the
More informationDatasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel
Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel ENGLISH Mineral insulated Type T Thermocouple 316 stainless steel Highly flexible,
More informationSTAINLESS STEEL PARTS - GENERAL STOCK LIST
STAINLESS STEEL PARTS - GENERAL STOCK LIST MOLNAR PRECISION LTD. PO BOX 1208, PRESTON, LANCASHIRE, PR2 0HG, ENGLAND PHONE 01772 700700 FAX 01772 705075 Web Site: www.manx.co.uk Email: sales@manx.co.uk
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationBetabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationM.B.M MODEL ENGINEERING SUPPLIES IMPORTERS & SUPPLIERS OF MODEL ENGINEERING EQUIPMENT Visit Our Web Site :
M.B.M MODEL ENGINEERING SUPPLIES IMPORTERS & SUPPLIERS OF MODEL ENGINEERING EQUIPMENT Visit Our Web Site : www.mbmmodelengineering.com Bill Parker : Telephone (09) 235-2018 P.O. Box 75-153, Manurewa, Fax
More information7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More information< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
More informationThreading 4.1. Pipe Capacity (in.) No. of Models. Type
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
More informationImperial thread inserts for metals
0101/12.02 American National Coarse Thread American National Fine Thread British Standard Whitworth Thread British Standard Fine Thread British Standard Pipe Thread ISO 228/1 Pipe Thread British Association
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationIllston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationPassive Speed Sensors
5/8 18 FAMILY General Purpose 70085-1010-001 1.125 (28.57) 70085-1010-003 2.625 (66.67) 70085-1010-018 3.625 (92.07) 70085-1010-118 5.000 (127.00) (Select cable from group A, see index) Output Voltage
More information