Passive Speed Sensors
|
|
|
- Julianna Richards
- 5 years ago
- Views:
Transcription
1 5/8 18 FAMILY General Purpose (28.57) (66.67) (92.07) (127.00) (Select cable from group A, see index) Output Voltage (Standard): 40 V (P-P) Output Voltage (Guarantee Point): 3.4 V (P-P) DC Resistance: 130 ohms max. Typical Inductance: 33 mh ref. Output Polarity: Pin B positive Operating Temperature: -55 to +107 C Net Weight: 5 oz. max. High Sensitivity (28.57) (66.67) (92.07) (127.00) (Select cable from group A, see index) Output Voltage (Standard): 150 V (P-P) Output Voltage (Guarantee Point):12.9 V (P-P) DC Resistance: 1500 ohms max. Typical Inductance: 360 mh ref. Output Polarity: Pin B positive Operating Temperature: -55 to +107 C Net Weight: 5 oz. max. 8
2 5/8 18 FAMILY Power Output (36.50) (Select cable from group A, see index) Output Voltage (Standard): 75 V (P-P) Output Voltage (Guarantee Point): 21.5 V (P-P) DC Resistance: 210 ohms max. Typical Inductance: 50 to 95 mh ref. Output Polarity: Pin "B" positive Operating Temperature: -73 to +107 C Net Weight: 2.2 oz. max. Based on 8 D.P. Gear Conduit Fitting General Purpose (28.57) (69.85) Output Voltage (Standard): 43 V (P-P) Output Voltage (Guarantee Point): 4.3 V (P-P) DC Resistance: 130 ohms max. Typical Inductance: mh ref. Output Polarity: Red lead positive Operating Temperature: -73 to +107 C Lead length: 10 ft (3.05 m) Net Weight: 16 oz. max. 9
3 5/8 18 FAMILY Full Thread Power Output Ordering Part # Thread Length (A) 1.80 (45.72) 3.06 (77.72) Based on 8 D.P. Gear Output Voltage (Standard): 120 V (P-P) Output Voltage (Guarantee Point):15.1 V (P-P) DC Resistance: 250 ohms max. Typical Inductance: mh ref. Operating Temperature: -55 to +107 C Cable Length: 10 ft (3.05 m) Net Weight: 5 oz. max. Full Thread General Purpose Ordering Part # Thread Length (A) 1.80 (45.72) 3.06 (77.72) Output Voltage (Standard): 40 V (P-P) Output Voltage (Guarantee Point): 3.4 V (P-P) DC Resistance: 130 ohms max. Typical Inductance: 33 mh ref. Output Polarity: white lead positive Operating Temperature: -55 to +107 C Lead Length: -078, 12 in (30.5 cm) -137, 24 in (60.9 cm) Net Weight: 3 oz. max. 10
4 5/8 18 FAMILY Full Thread High Sensitivity Ordering Part # Thread Length (A) 1.80 (45.72) 3.06 (77.72) Output Voltage (Standard): 150 V (P-P) Output Voltage (Guarantee Point): 12.8 V (P-P) DC Resistance: 1430 ohms max. Typical Inductance: 500 mh ref. Operating Temperature: -55 to C Lead Length: -003, 12 in (30.5 cm) -220, 36 in (91.4 cm) Net Weight: 3 oz. max. Molded High Sensitivity (28.57) (Select cable from group A, see index) Output Voltage (Standard): 190 V (P-P) Output Voltage (Guarantee Point): 13.9 V (P-P) DC Resistance: 1200 ohms max. Typical Inductance: 400 mh ref. Output Polarity: Pin B positive Operating Temperature: -40 to +150 C Net Weight: 2 oz. max. 11
5 5/8 18 FAMILY Molded (62.87) (76.20)* M16 x 1.5 Thd (114.12) (Select cable from group A, see index) ** Output Voltage (Standard): 63 V (P-P) Output Voltage (Guarantee Point): 4.9V (P-P) DC Resistance: 250 ohms max. Typical Inductance: 63 mh ref. Output Polarity: Pin B positive Operating Temperature: -55 to +107 C Net Weight: 5 oz. max. 12
6 3/8 24 FAMILY General Purpose (20.62) (92.08) Output Voltage (Standard): 21 V (P-P) Output Voltage (Guarantee Point): 1.6 V (P-P) DC Resistance: 125 ohms max. Typical Inductance: 22 mh ref. Operating Temperature: -55 to +107 C Lead Length: 6 in (15.2 cm) Net Weight: 2 oz. max. High Sensitivity (20.62) (20.62) Output Voltage (Standard): 55 V (P-P) Output Voltage (Guarantee Point): 4.2V (P-P) DC Resistance: 960 ohms max. Typical Inductance: 125 mh ref. Operating Temperature: -55 to +107 C Lead Length: -086, 18 in (45.7 cm) Cable Length: -355, 40 in (101.6 cm) Net Weight: 2 oz. max. 13
7 3/8 24 FAMILY General Purpose High Temperature (20.62) (38.10) (92.08) Output Voltage (Standard): 24 V (P-P) Output Voltage (Guarantee Point): 2.0 V (P-P) DC Resistance: 125 ohms max. Typical Inductance: 21 mh ref. Operating Temperature: -73 to +232 C Lead Length: 40 in (1 m) Net Weight: 2 oz. max. High Sensitivity - High Temperature (20.62) Output Voltage (Standard): 55 V (P-P) Output Voltage (Guarantee Point): 3.6V (P-P) DC Resistance: 705 ohms max. Typical Inductance: 150 mh ref. Operating Temperature: -65 to +220 C Cable Length: 60 in (1.5 m) Net Weight: 2 oz. max. 14
8 3/8 24 FAMILY Full Thread High Sensitivity (31.75) (38.10) Output Voltage (Standard): 55 V (P-P) Output Voltage (Guarantee Point): 4.2 V (P-P) DC Resistance: 960 ohms max. Typical Inductance: 125 mh ref. Operating Temperature: -55 to C Lead Length: 6 in (15.2cm) Net Weight: 1 oz. max. Smooth Body High Sensitivity Ordering Part # Length (A) (34.93) (63.50) Output Voltage (Standard): 55 V (P-P) Output Voltage (Guarantee Point): 4.2 V (P-P) DC Resistance: 960 ohms max. Typical Inductance: 125 mh ref. Operating Temperature: -30 to +85 C Lead Length: -004, 6 in (15.2cm) Cable Length: -314, 10ft (3.05m) Net Weight: 3 oz. max. 15
9 1/4-40 FAMILY General Purpose - High Temperature (B) (17.45).313 (7.95) *.687 (17.45).500 (12.70) (42.85).313 (7.95) Output Voltage (Standard): 4.7 V (P-P) Output Voltage (Guarantee Point): 0.4 V (P-P) DC Resistance: 125 ohms max. Typical Inductance: 5-12 mh ref. Operating Temperature: -73 to 232 C Lead Length: 8 in (20.3 cm) Cable Length: -472, 60 in (1.5 m) * Net Weight: 2 oz. max. * Egress is a 2-conductor, AWG #26, shielded, Teflon cable, with 3" long shrink tubing over housing and cable for extra protection. Extra locknut provided. 16
10 10-32 FAMILY High Sensitivity (12.70) (31.75) Output Voltage (Standard): 13 V (P-P) Output Voltage (Guarantee Point):.6 V (P-P) DC Resistance: 190 ohms max. Typical Inductance: 10 mh, ref. Operating Temperature: -55 to +107 C Lead Length: 18 in (45.7 cm) Net Weight: 1 oz. max. General Purpose High Temperature (12.70) (31.75) Output Voltage (Standard): 6 V (P-P) Output Voltage (Guarantee Point):.3 V (P-P) DC Resistance: 50 ohms max. Typical Inductance: 2 mh, ref. Operating Temperature: -73 to +150 C Lead Length: 18 in (45.7 cm) Net Weight: 1 oz. max. 17
11 LISTED PRODUCT UL/ATEX/CSA Sensors (38.10) (47.63) (69.85) (101.60) (152.40) Rating: UL and CSA listed for hazardous locations. Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F,G. Temp Code T3C. ATEX Group II, Category 3G, Zone 2 Based on 8 D.P. Gear Output Voltage (Standard): 54 V (P-P) Output Voltage (Guarantee Point):13.4 V (P-P) DC Resistance: 240 ohms max. Typical Inductance: 30 mh ref. Operating Temperature: -65 to 100 C Lead Length: 10 ft (3.05 m) Housing Ground: Green/Yellow Tracer Net Weight: 14 oz. max (38.10) (47.63) (69.85) (101.60) (152.40) Rating: UL and CSA listed for hazardous locations. Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F,G. Temp Code T3C. ATEX Group II, Category 3G, Zone 2 18 UL/ATEX/CSA Sensors Based on 8 D.P. Gear Output Voltage (Standard): 54 V (P-P) Output Voltage (Guarantee Point):13.4 V (P-P) DC Resistance: 240 ohms max. Typical Inductance: 30 mh ref. Operating Temperature: -65 to +100 C Lead Length: 10 ft (3.05 m) Housing Ground: Green/Yellow Tracer Net Weight: 14 oz. max.
12 LISTED PRODUCT FM / ATEX Sensors Thread Size (B) (38.10) 5/8-18 UNF-2A (47.63) 5/8-18 UNF-2A (69.85) 5/8-18 UNF-2A (101.60) 5/8-18 UNF-2A (152.40) 5/8-18 UNF-2A (47.63) 3/4-20 UNEF-2A (69.85) 3/4-20 UNEF-2A (101.60) 3/4-20 UNEF-2A (152.40) 3/4-20 UNEF-2A Rating: FM listed Intrinsically Safe, Class I, Division 1, Groups A, B, C, D; ATEX Group II, Category 3G, Zone 2. THREAD SIZE Output Voltage (Standard): 60V (P-P) Output Voltage (Guarantee Point): 13.4V (P-P) DC Resistance: 210 ohms max. Typical Inductance: 75 mh max. Operating Temperature: -55 to +220 C Cable Length: 15 ft. (4.57m) Net Weight: 16 oz. max. Based on 8 D.P. Gear FM / ATEX Sensors (38.10) (101.60) (152.40) (69.85) Thread Size (B) 5/8-18 UNF-2A 5/8-18 UNF-2A 5/8-18 UNF-2A 3/4-20 UNEF-2A THREAD SIZE * Rating: FM listed Intrinsically Safe, Class I, Division 1, Groups A, B, C, D; ATEX Group II, Category 3G, Zone 2. Output Voltage (Standard): 90 V (P-P) Output Voltage (Guarantee Point): 9.4 V (P-P) DC Resistance: 750 ohms max. Typical Inductance: 210 mh max. Operating Temperature: -55 to +232 C *Mounting Thread: -0405, 3/4-20 UNEF-2A Cable Length: 15 ft (4.57 m) Net Weight: 16 oz. max. 19
13 LISTED PRODUCT IEC EX Sensors Thread Size (B) Cable Length (C) Conduit Thread (38.10) 5/8-18 UNF-2A 3 m 1/2 NPT (68.85) 5/8-18 UNF-2A 3 m 1/2 NPT (101.6) 5/8-18 UNF-2A 3 m 1/2 NPT (152.4) 5/8-18 UNF-2A 3 m 1/2 NPT (38.10) 5/8-18 UNF-2A 10 m 1/2 NPT (68.85) 5/8-18 UNF-2A 10 m 1/2 NPT (101.6) 5/8-18 UNF-2A 10 m 1/2 NPT (152.4) 5/8-18 UNF-2A 10 m 1/2 NPT (68.85) 3/4-20 UNEF-2A 10 m 1/2 NPT (40.00) M16 x 1.5 6g 10 m G 1/ (100.0) M16 x 1.5 6g 10 m G 1/2 THREAD SIZE Rating: ATEX and IEC Ex Equip Group II, Category 2G, Gas Group IIC, Zone 1 Sensor must be used with MTL 7764ac intrinsic barrier User must install sensor in such a manner as to limit the output voltage to less than 12V Pk-Pk and a total energy of less than 26 microjoules Output Voltage (Standard): 54 V (P-P) Output Voltage (Guarantee Point):13.4 V (P-P) DC Resistance: 240 ohms max. Typical Inductance: 30 mh ref. Operating Temperature: -65 to 100 C Net Weight: 14 oz. max. Based on 8 D.P. Gear Available in a range of inch and metric thread lengths and sizes and cable lengths of 3 or 10 meters. Consult factory for additional details. 20
Proximity Transmitters, and Seismic Vibration Transmitters
TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
Proximity Transmitters, and Seismic Vibration Transmitters
Introduction TM016 Velocity/ Acceleration Vibration Transmitter The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
SKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
Solenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
Product Specification A1000i Loop Powered/4-20mA Submersible Level Transmitter/Transducer
CONTROL SYSTEMS 1239 WILLOW LAKE BOULEVARD VADNAIS HEIGHTS, MINNESOTA 55110 651 766 2700 Fax: 651 766 2701 www.control systems.usfilter.com Product Specification A1000i Loop Powered/4-20mA Submersible
Product Specification A1000i Loop Powered/4-20mA Submersible Level Transmitter/Transducer
CONTROL SYSTEMS 1239 WILLOW LAKE BOULEVARD VADNAIS HEIGHTS, MINNESOTA 55110 651 766 2700 Fax: 651 766 2701 www.control systems.usfilter.com Product Specification A1000i Loop Powered/4-20mA Submersible
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
Seismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
APPLICATION MANUAL. Universal Explosionproof Two-Compartments Instrument Housing Type: XD-ID100, XD-ID100win, XD-ID100H, XD-ID100Hwin
Updated 09.11.16 APPLICATION MANUAL Universal Explosionproof Two-Compartments Instrument Housing Type: XD-ID100, XD-ID100win, XD-ID100H, XD-ID100Hwin Contents: 1. Destination. 2. Flameproof joints, process
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
PXT-K Series. Pressure Transmitters Section 05
PXT-K Series Pressure Transmitters 00-02-0840 Section 05 This Murphy instrument is susceptible to damage when exposed to static electrical changes. To avoid this damage, observe the following: Disconnect
200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc
![E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc](/thumbs/74/70015027.jpg "E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc")
900/77-80-094-001 158877 For the intrinsically safe operation of a wide range of devices, such as HART transmitters, solenoid valves, sensors, zero-potential contacts and many more compact, space-saving
FM Approved Remote Kit Assembly (Part No ) Standard Remote Kit Assembly (Part No ) G2 SERIES G2 Industrial METER MODULES
G2 SERIES G2 Industrial METER MODULES FM Approved Remote Kit Assembly (Part No. 113275-1) Maintains FM Approval. Accommodates fluid temperatures from -40 F to +250 F (-40 C to +121 C) depending on meter.
Control Without Compromise. Suitable for use in hot, cold, wet, dirty, abusive, corrosive, and explosive environments
leverless limit switches Proximity Sensors for Harsh Environments and Tough Applications Suitable for use in hot, cold, wet, dirty, abusive, corrosive, and explosive environments Certified for use in all
Model 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
For single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL
Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism
% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
Certificate of Compliance
Certificate of Compliance Certificate: 70054084 Issued to: Emerson - Rosemount, Micro Motion Inc. 12001 Technology Dr. Eden Prairie, Minnesota 55344 USA Attention: Paul Schilke The products listed below
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
GO Switch Leverless Limit Switches 02 Reliable, Durable Position Sensing GO Switch leverless limit switches provide reliable, durable position sensing
GO Switch Leverless Limit Switches 02 Reliable, Durable Position Sensing GO Switch leverless limit switches provide reliable, durable position sensing in the most demanding plant conditions. Unlike mechanical
Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
Operating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
APPROVALS:
DOC #: DE733010102 Rev A NAMEPLATE 138.3 5.45 DISPLAY CAN BE ROTATED UP TO 180 BOTH DIRECTIONS A14005 91.9 3.62 41.1 1.62 46 1.81 119.2 4.69 146.5 5.77 CLEARANCE FOR 1/4" BOLT (4 PLCS) GAGE 1/2" NPT (FEMALE)
Rosemount Product Data Sheet , Rev GA Catalog FIELDBUS PROTOCOL. Hazardous Locations Certifications
Product Data Sheet Rosemount 3051 FIELDBUS PROTOCOL Hazardous Locations Certifications North American Certifications FM Approvals E5 Explosion-Proof for Class I, Division 1, Groups B, C, and D. Dust-Ignition-Proof
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
FAIRCHILD T8001 SERIES STANDARD RANGE MINIATURE TWO-WIRE, P/I PRESSURE TRANSDUCER. Installation, Operation and Maintenance Instructions
FAIRCHILD T800 SERIES STANDARD RANGE MINIATURE TWO-WIRE, PI PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions Model TT800 Model TA800 Model TD800 Inlet Port (Channel 2) Inlet Port
Fisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
G 1/4 A DIN 3852 (bar version) ±0.5 %FS max
Pressure Transducers HDA 00 & 700 About HDA 00 & 700 Pressure Transducers: Series HDA 000 transducers are compact, heavy-duty, pressure instruments designed for both OEM industrial and off-road applications
A LOOK INSIDE MODEL 7 TECHNOLOGY IN ACTION 70 Series LEVERLESS LIMIT SWITCH GO Switch 70 Series end sensing switches use three permanent magnets and p
AirOil Systems, Inc. Round Sensors A LOOK INSIDE MODEL 7 TECHNOLOGY IN ACTION 70 Series LEVERLESS LIMIT SWITCH GO Switch 70 Series end sensing switches use three permanent magnets and pushpull plunger
Data sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
V200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
Mid-West Instrument. Diaphragm Type Model 240. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 240/11 (SUPERSEDES BULLETIN NO. 240/06) Mid-West Instrument Diaphragm Type Model 240 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Field wireable
97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
TECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
Redundant Control System
Redundant Control System Safety instrumented system applications up to SIL 3 Process reliability Process valve diagnostics COMPLETE FUNCTIONAL SAFETY WITH ENHANCED RELIABILITY The Redundant Control System
Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
Proximity Transducers, Seismic Sensors and Accessories
ProvibTech s Case Mount Sensors Selection Guide Model Number Sensitivity TM0782A TM0783A TM0786A General Purpose Accelerometer TM0784B TM0793V TM079VD Low Power Accelerometer Velocity Transducer 100 mv/g
Belt Scales Speed sensors
Overview is a low- to high-resolution shaft-driven speed sensor. Benefits Compact and economical Easy, low-cost installation Accurate belt speed detection Optional resolutions for measurement over a range
GO gets it. The all in one proximity sensor and limit switch.
The all in one proximity sensor and limit switch. GO gets it. GO Switch is the most versatile sensing solution. It detects like a proximity switch and functions like a limit switch, providing higher reliability
V200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
Belt Scales Speed sensors
Overview is a low- to high-resolution shaft-driven speed sensor. Benefits Compact and economical Easy, low-cost installation Accurate belt speed detection Optional resolutions for measurement over a range
Data Sheet DS/NGB-EN Rev. B. Multi barriers. Measurement made easy. Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1
Data Sheet DS/NGB-EN Rev. B Multi barriers Measurement made easy Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1 Change from two to one column Multi barriers Change from one to two columns
Certificate of Compliance
Certificate of Compliance Certificate: 1345550 (LR 36637) Master Contract: 152423 Issued to: Measurement Technology Limited Great Marlings Butterfield Luton, Bedfordshire LU2 8DL United Kingdom Attention:
APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
Integrated Control modules
.60.0 Rev. 0 Page of 9 Integrated Control modules QC, QC2 and QC Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in Last
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
Mid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
Rosemount 3095FT MultiVariable Flow Data Logger
Quick Installation Guide Rosemount 3095FT Rosemount 3095FT MultiVariable Flow Data Logger Step 1: Mount the Transmitter Step 2: Consider Housing Rotation Step 3: Set Jumpers and Switches Step 4: Connect
Direct-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
HERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
Level limit switch Series RN 3000 / 6000 Selection list. Overview. Specifications. Applications
Table of contents Page Overview Specifications Applications P2 P4 P6 --------------------------------------------------------------------------------------------------------- RN..001 Short extension length
VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING
VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING WWW.VACACCESSORIES.COM 205-678-0507 The V200 Positioner Internal I/p with simple loop test points.
WDB810V3AI Continuous Temperature Monitoring NTC 1/4 BSP 20. WDB819V3AI Continuous Temperature Monitoring PT100 1/4 BSP 20
Bearing Temperature Sensor WDB8 Series Bearing Temperature Sensor For use on any application where bearing temperature monitoring is required. METHOD OF OPERATION The WDB 8 series bearing sensors are designed
Ex-proof proportional relief valves Direct or pilot operated, without transducer - ATEX, IECEx, EAC or CULUS
Table FX1-/E Replaces F6-5 /E E125-16 /E Ex-proof proportional relief valves Direct or pilot operated, without transducer - ATEX, IECEx, EAC or CULUS Valve main body Cartridge Mechanical pressure limiter
Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural
Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical
Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581
www.stahl.de > Various versions Extra-low voltage up to 16 A 16, 32, 125 A > Large handle, can be locked in position 0 and I > Clear switch position indication > Optimal contact by means of self-cleaning
Heating Cable. Description
203312 Single Entry Connection Box NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power or Tee Connection 3/4 Conduit Hub Opening End Seal
Direct mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending
Direct mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending The V-Solenoid II Standard Series ATEX EX Series Intrinsically Safe Series ExProof
Fisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
Series Level-Trol Electronic Liquid Level Transmitters
0- Level-Trol Series 0- Series Level-Trol Electronic Liquid Level Transmitters W0-/IL Non-Interactive Zero and Span Adjustments; Dry Span Calibration Allows Field Recalibration without Removing Wiring
Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
HKH Series. HAZCON Controls for Harsh and Hazardous Environments
HKH Series HAZCON Controls for Harsh and Hazardous Environments Z A H LO C NON-METALLIC DIN RAIL MOUNT Component Mounting Rail Optional Customer I.D. Nameplate Optional Legend Plate Explosion Protective
Easier! Faster! Safer!
Gexol CIR Crush and Impact Resistant Without External Armoring Passes the same stringent crush and impact testing required by UL 2225 for Type MC-HL Index CIR Power Cables Three & Four Conductor + Ground...
V200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and the ability
Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
Continuous level measuring system NB 3000 Selection list. Overview
Table of contents Page Overview P2 ------------------------------------------------------------------------------------------------------------------- Specifications P3 -------------------------------------------------------------------------------------------------------------------
Sensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
Level Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
Studded Power Feed Thru Terminal Blocks
ST722 Series The Studded Power Feed Thru were designed for applications where power feed thru is necessary using standard double hole lugs with.625 spacing. These terminal blocks are available in three
Certificate of Compliance
FF0001 Certificate of Compliance Certificate: 1345550 Issued to: Eaton Electric Ltd. Great Marlings Butterfield, Luton Bedfordshire LU2 8DL United Kingdom Attention: Mr. Peter Rigling The products listed
Overview. Specifications. Applications
Vibranivo Level limit switch 1 Series VN 00 / 000 / 000 / 000 Table of content Page Overview P Specifications P Applications P ------------------------------------------------------------------------------------------------------------
Low Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4" to 1" NPT. Features
.4 W Solenoid Valves Brass or Stainless Steel Bodies /4" to " NPT 4/ Features Moulded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Designed for use in automation
K Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
V82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components
Point level measurement Capacitance switches
Pointek CLS300 Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
Level Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
AST44LP Intrinsically Safe Low Pressure Transducers / Transmitters
AST44LP Intrinsically Safe Low Transducers / Transmitters Class I Division 1 Groups C, D IS with Approved Barrier OVERVIEW The AST44LP is a stainless steel pressure transducer with a wide variety of options.
NIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
Air and Inert Gas Non-Incendive Field Wiring Valves Brass, Aluminum, or Stainless Steel Bodies /" to " NPT / 5/ 5/3 Features solenoid enclosures to provide corrosion resistance in harsh environments Designed
Instruction Manual December milltronics RBSS
Instruction Manual December 2004 milltronics Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
VK-P SERIES TSI TRANSDUCER MODEL VK-263P TRANSDUCER INSTRUCTION MANUAL
MANUAL NO. 29362E3.6 Published in Jun.2001 Revised in Aug.2008 VK-P SERIES TSI TRANSDUCER MODEL VK-263P TRANSDUCER INSTRUCTION MANUAL FOREWORD VK-263P For Use in Safety... Thank you for your using our
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
Ar-Mite TM Low Flow Armored Flowmeter
Data Sheet Brooks Ar-Mite TM MT 3750C Ar-Mite TM Low Flow Armored Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter with Transmitter or Inductive Alarm
Integrated Control modules
.604.0 - Rev: 6, Page of Integrated Control modules QC4, QC42 and QC43 Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in
Bulletin 871P Can Sensors
Bulletin 871P Can Sensors Description Bulletin 871P inductive proximity can sensors are self-contained solid state devices, designed specifically for sensing size 202 to 704 metal cans without physical
BETA SWITCHES FOR HAZARDOUS AREA
BETA offers complete line of switches for (classified) hazardous locations! The BETA Switch, well known as a safety instrument, adds an extra dimension to industrial safety by having area approval up to
97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
Kämmer Actuators Series 4 Pneumatic and Electropneumatic
flowserve.com Kämmer Pneumatic and Electropneumatic Description Kämmer pneumatic actuators are widely known for their versatile diaphragm design, easy installation and simplified maintenance. When compared
Continuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS
OSUR CL HA ES EN KILLARK Z LO C SJIC SERIES TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS Screw cover style, with or without continuous hinge 3/16 (5mm) wide flat flange for maximum gasket surface
G2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
Our policy is one of continued research and development. We therefore reserve the right
970 Namur /-, /- and /-Directional control valves Electromagnetic indirectly controlled soft seal spool valves G /4, /4 NPT NAMUR-interface For single and double operated actuators Exhaust air recirculation
Type Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
Clearwater Tech - Phone: Fax: Web: -
Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One
4 Redundant Control System
4 Redundant Control System Introducing the all NEW RCS Configurator Safety Instrumented Systems Process Reliability Process Valve Diagnostics COMPLETE FUNCTIONAL SAFETY WITH ENHANCED RELIABILITY The Redundant