Product Specification A1000i Loop Powered/4-20mA Submersible Level Transmitter/Transducer
|
|
|
- Leon Summers
- 6 years ago
- Views:
Transcription
1 CONTROL SYSTEMS 1239 WILLOW LAKE BOULEVARD VADNAIS HEIGHTS, MINNESOTA Fax: systems.usfilter.com Product Specification A1000i Loop Powered/4-20mA Submersible Level The A1000i is a 9-30VDC, two wire loop powered submersible level transducer with a 4-20mA signal output. It is mounted at a low point in a liquid media. The transducer uses a gauge pressure piezoresistive sensor element to measure the hydrostatic head-pressure. The sensor element is isolated from the media by a Teflon coated Buna-N diaphragm. This pressure is proportional to the height of the liquid above the sensing diaphragm and is converted to a proportional 4-20mA signal. This 4-20mA signal spans the full pressure range of the transducer. The transducer is barometrically compensated via a rigid breather tube connected to a panel mounted sealed breather assembly. All A1000i transducers require a Breather Assembly Kit. Part Number Description Sensors A1000i sensor 1.5 PSI 4-20mA output (0-3.5 ft of water) A1000i sensor 5 PSI 4-20mA output ( ft of water) A1000i sensor 15 PSI 4-20mA output ( ft of water) A1000i sensor 30 PSI 4-20mA output ( ft of water) Housing/Cable Assembly A1000 Housing/Cable Sub-Assembly 20ft A1000 Housing/Cable Sub-Assembly 30ft A1000 Housing/Cable Sub-Assembly 40ft A1000 Housing/Cable Sub-Assembly 60ft A1000 Housing/Cable Sub-Assembly 80ft A1000 Housing/Cable Sub-Assembly 100ft XX A1000 Housing/Cable Sub-Assembly custom lengths (XX equals number of feet) Mounting Hardware and Accessories B100 9G CLS Stainless Steel Pipe Mounting Clamps Cable Suspension Mounting Pipe (without SS cable) XX Stainless steel cable; each additional 10 ft (XX) Breather Assembly Kit (required for all A1000i sensors) Terminal Connection (Junction) Box w/built In Breather Assembly Agency Approval FM and CSA Intrinsically Safe Class I, Div. 1, Groups A,B,C,D with an approved barrier.
2 Specifications Environmental Atmosphere Ventilation Operating Temperature sealed breather system equalizes atmospheric pressure range 32ºF to +158ºF Liquid must remain fluid. Physical Housing 316 cast stainless steel, Teflon coated Cable heavy-duty polyethylene with vent tube, shield and 18 AWG conductors Mounting suspension cable mount or 1 pipe mount Pressure Ranges 1.5 PSI to 30 PSI Max Over Pressure Range 1.5 PSI 8X full scale 5.0 PSI 4X full scale 15 PSI & 30 PSI 2X full scale Exposed Materials 316 cast stainless steel Teflon coated, synthetic rubber and urethane Sensing Head two-layer diaphragm with Teflon and Buna-N material Electrical Power Required 9 30 VDC Typical Loop Resistance VDC Maximum Loop Resistance VDC Signal Output 4-20mA Accuracy ±0.25 % full scale with long term stability of 0.2 % full scale per year. Page 2 of 7
3 Intrinsically Safe Barrier Applications When selecting an intrinsically safe barrier consider the following: cable length, classification of hazardous area, cable inductance and capacitance, and the intrinsic safe ground system. Barriers whose entity parameters meet the following requirements can be used. Voc Vmax Isc Imax Ca > Ci + Ccable La > Li + Lcable A1000i Transmitter Entity Parameters Vmax Imax Ci Li 28V 93mA 0.11 uf 0.22mH Note: USFCS IS1-2 Part number does not meet these entity parameters. An intrinsically safe system should be designed and tested by a qualified engineering professional. Compatible Barriers Manufacturer Part No. Type MAX Loop Resistance MTL 7706 Amplified Zener, 500 ohms Common Neg. MTL 5041 Galvanically Isolated 1000 ohms Phoenix Contact Model PI/Ex-ME-RPS(s)-I/I Galvanically Isolated 800 ohms Note: Each of the barriers requires 24VDC to operate. When any of these barriers are used, with a CMR25-04, an external power source is required to power the IS barrier. MTL7706+ Active Zener Barrier (UL Pending) Page 3 of 7
4 MTL5041 Galvanically Isolated Barrier Phoenix Contact Model PI/Ex-ME-RPS(s)-I/I Galvanically Isolated Barrier Page 4 of 7
5 D620i CMR25 and IS Barrier Application Note: This application connects the D620I common to ground. Note: Current flows through ground. D620i Application Note: This application is not intrinsically safe. Page 5 of 7
6 TP12 Transient Protector Application Note: This application is not intrinsically safe Microcat Application Note: This application is not intrinsically safe. Page 6 of 7
7 Suspension Cable Mounting Page 7 of 7
Product Specification A1000i Loop Powered/4-20mA Submersible Level Transmitter/Transducer
CONTROL SYSTEMS 1239 WILLOW LAKE BOULEVARD VADNAIS HEIGHTS, MINNESOTA 55110 651 766 2700 Fax: 651 766 2701 www.control systems.usfilter.com Product Specification A1000i Loop Powered/4-20mA Submersible
WARNING! READ BEFORE INSTALLATION
A4 INTRINSICALLY SAFE & NON-INCENDIVE RATED PRESSURE TRANSMITTER INSTRUCTION SHEET WARNING! READ BEFORE INSTALLATION 1. GENERAL: A failure resulting in injury or damage may be caused by excessive overpressure,
m WARNING! READ m BEFORE INSTALLATION
m WARNING! READ m BEFORE INSTALLATION 1. GENERAL: A failure resulting in injury or damage may be caused by excessive overpressure, excessive vibration or pressure pulsation, excessive instrument temperature,
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
MODEL K WIRE INDICATING PRESSURE TRANSMITTER INTRINSICALLY SAFE VERSION OPERATION AND INSTRUCTION MANUAL
MODEL K712 2WIRE INDICATING PRESSURE TRANSMITTER INTRINSICALLY SAFE VERSION OPERATION AND INSTRUCTION MANUAL Switzer Instrument Limited Regd. Off: 29 (Old# 14), Thanikachalam Road, P.B.No.1423, Chennai
The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T5220 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
METAL VAREA-METER STRAIGHT THROUGH TYPE ROTAMETER
TECHNICAL INFORMATION METAL VAREA-METER STRAIGHT THROUGH TYPE ROTAMETER Electronic Transmitter INTRODUCING THE METAL TUBE VAREA-METER U.S. Filter/Wallace & Tiernan Products straight through metal tube
EG Series Installation Manual
EG Series Installation Manual Convenient Micro Connectors (M) speed installation and maintenance Enclosure is fully potted and sealed to eliminate threat of moisture contamination in the wiring and electronics
Miniature I/P, E/P Transducer
Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional
Miniature I/P, E/P Transducer for Electronic Air Pressure Control
Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control The Type-900X I/P, E/P transducer converts an electrical signal (current or voltage) to a proportional
Miniature I/P, E/P Transducer for Electronic Air Pressure Control
Type 900X Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control Available with zero-based ranges The Type-900X I/P, E/P transducer converts an electrical
FAIRCHILD T8001 SERIES STANDARD RANGE MINIATURE TWO-WIRE, P/I PRESSURE TRANSDUCER. Installation, Operation and Maintenance Instructions
FAIRCHILD T800 SERIES STANDARD RANGE MINIATURE TWO-WIRE, PI PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions Model TT800 Model TA800 Model TD800 Inlet Port (Channel 2) Inlet Port
Installation, Operation and Maintenance Instructions Output Range Part Number Input psi bar Impedance Output Range
Type 500X Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions Ordering Information Type 500X I/P Transducers Output Range Part Number Input psi bar Impedance Pilot
FAIRCHILD T5200 SERIES ELECTRO-PNEUMATIC TRANSDUCER Installation, Operation and Maintenance Instructions
FAIRCHILD T500 SERIES ELECTRO-PNEUMATIC TRADUCER Installation, Operation and Maintenance Instructions Identification Number Underwriting Group Factory Mutual Canadian Standard T (F) (C) 500- Approval Class
Fisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
V200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
Passive Speed Sensors
5/8 18 FAMILY General Purpose 70085-1010-001 1.125 (28.57) 70085-1010-003 2.625 (66.67) 70085-1010-018 3.625 (92.07) 70085-1010-118 5.000 (127.00) (Select cable from group A, see index) Output Voltage
Type Type 1001 Transducers. I/P & E/P Transducers
Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
Installation Manual OPEN. For Corrosive Service. The ONYX integrates electronic sensors and pneumatic valving into a vapor tight enclosure.
For Corrosive Service Installation Manual The ONYX integrates electronic sensors and pneumatic valving into a vapor tight enclosure. OPEN StoneL Corporation One StoneL Dr 26275 US Hwy 59 Fergus Falls,
Features. Flexibility
The V100 positioner can be ordered as a base model pneumatic positioner, converted to standard NEMA 4X electropneumatic, EX model, or FF (fail freeze) model in a matter of minutes, without removing the
AMETEK MODEL 88 SERIES ELECTRONIC PRESSURE TRANSMITTER
AMETEK MODEL 88 SERIES ELECTRONIC PRESSURE TRANSMITTER INSTRUCTIONS FOR INSTALLATION, OPERATION AND CALIBRATION K796325 REV H (08/15) WARRANTY POLICY AMETEK [ Seller ] warrants the following listed products.
EZ-LIGHT K30L and K50L Intrinsically Safe Indicators
For use in hazardous areas with suitable zener barriers or galvanic isolators ATEX and IECEx certifications Fully sealed and rated to IP67/IP69K 1-, 2-, or 3-color models available; 5 available colors
AST44LP Intrinsically Safe Low Pressure Transducers / Transmitters
AST44LP Intrinsically Safe Low Transducers / Transmitters Class I Division 1 Groups C, D IS with Approved Barrier OVERVIEW The AST44LP is a stainless steel pressure transducer with a wide variety of options.
Fisher 646 Electro Pneumatic Transducer
Instruction Manual 646 Transducer Fisher 646 Electro Pneumatic Transducer Contents Introduction... 1 Scope of Manual... 1 Description... 3 Specifications... 4 Educational Services... 4 Installation...
Fisher 646 Electro Pneumatic Transducer
Instruction Manual 646 Transducer Fisher 646 Electro Pneumatic Transducer Contents Introduction... 1 Scope of Manual... 1 Description... 3 Specifications... 4 Educational Services... 4 Installation...
Ex Instruction manual. Rotamass Coriolis mass flow meter. IM 01U10X03-00EN-R, 1st edition, Rev FM-1
Ex Instruction manual Rotamass Coriolis mass flow meter IM 01U10X03-00EN-R, 1st edition, 2017-02-08 Rev -1 Table of contents Table of contents 1 Introduction... 3 1.1 Scope of application... 3 1.2 Applicable
Fisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
Type Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
SKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
Type 500X. Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions. Ordering Information.
Type 500X Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions Ordering Information Type 500X I/P Transducers Output Range Part Number Input psi kpa Impedance 500-AA
LTX RF LEVEL SENSOR. Instruction Manual
LTX RF LEVEL SENSOR Instruction Manual FOR MODELS LTX01, LTX02, LTX05 Intempco Document No: LTX - M01 Rev. 1 Issue Date: April 2005 LTX01 RF LEVEL SENSOR USER MANUAL Software Rev : Rev. Date : June 2004
Certificate of Compliance
FF0001 Certificate of Compliance Certificate: 1345550 Issued to: Eaton Electric Ltd. Great Marlings Butterfield, Luton Bedfordshire LU2 8DL United Kingdom Attention: Mr. Peter Rigling The products listed
Type E-10, E-11 Hazardous Area Explosion-proof Transmitters
Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications
Fisher 546 Electro Pneumatic Transducer
546 Transducer Product Bulletin Fisher 546 Electro Pneumatic Transducer Fisher 546 transducers receive a direct current input signal and use a torque motor, nozzle flapper, and pneumatic relay to convert
Smart Pressure Transmitter
DOC. O.: C3700-L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3700-L 298-29, GODA-RO, GUPO-SI, GYEOGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
Model PPM 200 Precision Pulse Volumetric Fluid Flow Meter
INSTRUCTIONS PARTS LIST 308 331 INSTRUCTIONS This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Model PPM 200 Precision Pulse Volumetric Fluid Flow Meter Displays instantaneous
% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
User s Manual. Model MLA & MLD Loop Powered Process Indicators. Model MLD (Digital) Model MLA (Analog)
User s Manual Model MLA & MLD Loop Powered Process Indicators Model MLD (Digital) Model MLA (Analog) 1. PREFACE The Model MLA and MLD field mounted indicators receive DC voltage or current signals by electronic
U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA U.S.A. TEL: (215) FAX: (215)
U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA 19053 U.S.A. TEL: (215) 355-6900 FAX: (215) 354-1801 www.ametekusg.com 2009, by AMETEK, Inc. All rights reserved. Printed in the
PXT-K Series. Pressure Transmitters Section 05
PXT-K Series Pressure Transmitters 00-02-0840 Section 05 This Murphy instrument is susceptible to damage when exposed to static electrical changes. To avoid this damage, observe the following: Disconnect
Optic Level Switch LO10 Series Owner s Manual
Warranty, Service & Repair To register your product with the manufacturer, fill out the enclosed warranty card and return it immediately to: Flowline Inc. 10500 Humbolt Street Los Alamitos, CA 90720. If
Ar-Mite TM Low Flow Armored Flowmeter
Data Sheet Brooks Ar-Mite TM MT 3750C Ar-Mite TM Low Flow Armored Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter with Transmitter or Inductive Alarm
1100 Series Piston Type Differential Pressure Gauges
1100 Series Piston Type Differential Pressure Gauges 1. Safety Before installing, check the Series Number and verify compatibility to the process media and temperature in contact with the wetted parts.
Proximity Transmitters, and Seismic Vibration Transmitters
TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
Carbon Monoxide Transmitter
Introduction The CO Transmitter uses an electrochemical sensor to monitor the CO level and outputs a 4-20 ma signal. The standard product features a 2- wire loop-powered output. Optionally, the device
Industrial Pressure Transmitters
Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from
SSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
NIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
Air and Inert Gas Non-Incendive Field Wiring Valves Brass, Aluminum, or Stainless Steel Bodies /" to " NPT / 5/ 5/3 Features solenoid enclosures to provide corrosion resistance in harsh environments Designed
Vortex Flowmeters VFM 3100 F-T VFM 3100 W-T
KROHNE 10/2001 7.02313.23.00 GR/OP Vortex Flowmeters F-T W-T Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
WBS 3000 Water Bottom Sensor for fuel oil and chemical storage tanks Installation and Operating Instructions
Labkotec Oy Myllyhaantie 6 FI-33960 PIRKKALA FINLAND Tel: +358 29 006 260 Fax: +358 29 006 1260 12.3.2013 Internet: www.labkotec.com 1/12 WBS 3000 Water Bottom Sensor for fuel oil and chemical storage
Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
Metal Particle Detector
Metal Particle Detector Model MPD Stainless steel Overview The Metal Particle Detector switch from AMOT can detect and alert equipment operations of the presence of metal particles in non-conductive fluid
BULLETIN NO.ELEC IM121/10A Replaces IM121/09A
Mid-West Instrument BULLETIN NO.ELEC IM121/10A Replaces IM121/09A INSPECTION Model 121 Indicating Differential Pressure Switch / Transmitter Electrical: Installation and Operating Instructions Upon receipt
Smart Pressure Transmitter
DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
Type Type I/P & E/P Transducers
Type 1500 I/P & E/P Type 1500 Description Principle of Operation (ee Fig. 2 and 6) The T-1500 Transducer is a force balance device in which a coil is suspended in the field of a magnet by a flexure. Current
Model 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
Certificate of Compliance
Certificate of Compliance Certificate: 1345550 (LR 36637) Master Contract: 152423 Issued to: Measurement Technology Limited Great Marlings Butterfield Luton, Bedfordshire LU2 8DL United Kingdom Attention:
Electropneumatic Transducer (I/P, E/P)
Type 500X Electropneumatic Transducer (I/P, E/P) Economical and reliable electrical conversion to pressure The ControlAir Type 500X converts a current or voltage input signal to a linearly proportional
From. McCROMETER, INC WEST STETSON AVENUE HEMET, CA Phone (951) Toll Free (800) Fax (951)
SPI Mag MODEL 282L SINGLE POINT INSERTION ELECTROMAGNETIC FLOW METER 2 SENSOR SUBMITTAL PACKAGE From McCROMETER, INC. 3255 WEST STETSON AVENUE HEMET, CA 92545 Phone (951) 652-6811 Toll Free (800) 220-2279
Creative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD Phone (443)
Creative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD 21131 Phone (443) 807-1202 info@creativeengineers.com www.creativeengineers.com MAGNETIC FLOWMETERS Creative Engineers
From lab to production, providing a window into the process
From lab to production, providing a window into the process Understanding Pressure Measurement needs of Plastics Manufacturing Topics Part I- Pressure Transducer Basics Part II- Types of Plastics Extrusion
Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
Fisher 3582 and 3582i Positioners, 582i Electro-Pneumatic Converter, and 3583 Valve Stem Position Transmitters
Instruction Manual D00138X01 358, 58i, and 3583 Fisher 358 and 358i Positioners, 58i Electro-Pneumatic Converter, and 3583 Valve Stem Position Transmitters Contents Introduction...............................
Fisher 3582 and 3582i Positioners, 582i Electro Pneumatic Converter, and 3583 Valve Stem Position Transmitter
Instruction Manual 358, 58i, and 3583 Fisher 358 and 358i Positioners, 58i Electro Pneumatic Converter, and 3583 Valve Stem Position Transmitter Contents Introduction... Scope of Manual... Description...
Smart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
Kimray reserves the right to modify or improve the designs or specifications of such products at any time without prior notice Kimray Inc.
All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be construed as warranties
Creative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD Phone (443)
Creative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD 21131 Phone (443) 807-1202 info@creativeengineers.com www.creativeengineers.com MAGNETIC FLOWMETERS Creative Engineers
P200 P/I Transducer. Installation, Operation, and Maintenance Instructions INTRODUCTION
INTRODUCTION Scope This manual provides instructions for the installation, adjustment, maintenance, and parts ordering of the P200 Pneumatic-to-Current P/I Transducer. Due to its over-engineered design,
Certificate of Compliance
Certificate of Compliance Certificate: 70054084 Issued to: Emerson - Rosemount, Micro Motion Inc. 12001 Technology Dr. Eden Prairie, Minnesota 55344 USA Attention: Paul Schilke The products listed below
OEM Pressure Transmitters
OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma
Contents. Pressure measurement technology Pressure calibrators 18 Exercises 19-20
1 Pressure Contents Topics: Slide No: Pressure measurement technology 03-17 Pressure calibrators 18 Exercises 19-20 2 Pressure Gauges Barometer Used to measure Barometric Pressure Reference is 0 psia,
Type I/P & E/P Transducers
Type 1500 I/P & E/P Transducers Type 1500 Description The T-1500 is a new series of electro-pneumatic transducers that convert an electrical signal to a proportional pressure output. It provides precision
SATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
PT-500 Analog Output Series User Manual
PT-500 Analog Output Series User Manual 4-20 ma, 0-5 VDC, 0-10 VDC, mv/v R Doc #9004194 Rev A2, 08/16 Table of Contents Introduction... iii Warranty and Warranty Restrictions... iv Chapter 1: Specifications
MP-5400 Series. Application. Features. Applicable Literature. Electronic Positive Positioning Hydraulic Actuator General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com MP-5400 Series Electronic Positive Positioning Hydraulic Actuator General Instructions Application The MP-5400 Series Actuators
TEK-B AR 3110A. Differential Pressure Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys PRESSURE
Technology Solutions TEK-B AR 3110A Differential Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar 3110A Differential
TECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
Pressure Transmitter. Informational & Installation Manual
Pressure Transmitter Informational & Installation Manual February 24, 2011 M374 Rev. E JOWA USA, Inc. 59 Porter Road Littleton, MA 01460 Phone: 978-486-9800 Fax: 978-486-0170 Care and Handling Our submersible
Fisher i2p-100 Electro Pneumatic Transducer
Instruction Manual i2p-100 Transducer Fisher i2p-100 Electro Pneumatic Transducer Contents Introduction... 1 Scope of Manual... 1 Description... 4 Specifications... 4 Educational Services... 4 Installation...
CANADA SENSORS TECHNOLOGY INC.
CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters LIQUID LEVEL TRANSMITTER PROCESS 10 HART Enabled Intrinsically Safe Model Submersible Pump Lift Station
MS Application. Features. Proportional Valve Actuator General Instructions
Proportional Valve Actuator Application The Proportional Valve Actuator is a non-spring return actuator used with proportional to 10 Vdc or 4 to 0 ma controllers and standard 1/" to 1-1/4" two-way and
1' to 10' deep and 1' to 25' deep
ULTRASONIC ECHO-SCALE TM SCALE: INDICATOR: ECHO-SCALE TM NONE PROVIDED electronic sensors for vessels 1' to 10' deep and 1' to 25' deep INSTALLATION & OPERATION s/n 1-800-893-6723 Fax: 925-686-6713 www.forceflow.com
T-1001 TYPE 1001 I/P & E/P TRANSDUCERS
TYPE 1001 I/P & E/P TRANSDUCERS T-1001 The Type 1001 is a patented family of electro-pneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
Proximity Transmitters, and Seismic Vibration Transmitters
Introduction TM016 Velocity/ Acceleration Vibration Transmitter The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
LIMIT SWITCH Axiom - AX
LIMIT SWITCH Axiom - AX with FOUNDATION Fieldbus Installation, Maintenance and Operating Instructions (AX93 ) 2 Table of Contents Table Of Contents... Page 2 Axiom Model Guide... Page 3 Dimensions and
QB4 PRESSURE CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS
QB4 PRESSURE CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION The QB4 is a closed loop electronic pressure regulator consisting of two solenoid valves, an internal pressure transducer,
CP-8301-xxx Series. Application. Features. Applicable Literature. 1 to 15 Vdc Input Electronic Actuator Drive General Instructions
CP-80-xxx Series to 5 Vdc Input Electronic General Instructions Application The CP-80-xxx Series electronic actuator drive is designed to process a variable to 5 Vdc signal from a controller to provide
Intrusive RF Capacitance Level Switch LP10 Series Owner s Manual Provided by:
Warranty Service and Repair To register your product with the manufacturer, fill out the enclosed warranty card and return it immediately to: Flowline Inc. 10500 Humbolt Street Los Alamitos, CA 90720 If
SIGNET 2760 DryLoc ph/orp Preamplifier
SIGNET 2760 DryLoc ph/orp Preamplifier 3-2760.090 3-2760.090 (A-3/04) English SAFETY INSTRUCTIONS 1. Depressurize and vent system prior to installation or removal. 2. Confirm chemical compatibility before
Mountable with O-ring seal Urea level ±0.5% Accuracy Urea pressure ±2.0 Total Error Band Air Brakes Corrosive fluid measurement for E&V applications
Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output DESCRIPTION The U86B is a small profile, media compatible, piezoresistive
SPANS AND RANGES. Lower Range Limits 150 in. H 2 O ( 38 kpa) 800 in. H 2 O ( 200 kpa)
Specifications 571T, 572T Electronic Differential Pressure Transmitter with Sanitary/ Aseptic Remote Seal Elements ±0.2% of span accuracy Spans from 25 to 800 inches H2O Outstanding temperature stability
User s Guide EP510, IP510, EP511, IP511 SERIES. Electroneumatic Converters. Shop online at
MADE IN User s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info EP510, IP510, EP511, IP511 SERIES Electroneumatic Converters OMEGAnet Online Service omega.com
Model Connections Max. Flow Range (H 2 O) 10A A3220 Horizontal ¼ NPT 100 l/h. 10A3225/55 Vertical ¼ NPT 100 l/h. Vertical 1 NPT Vertical 1 G
Data Sheet Field IT Variable Area Flowmeters Armored Purgemeter 10A3200 n n n Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases.
G2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
InVue Electronic Flowmeter, Model NT4400
P/N 01-1036196 REV. B 01/17 InVue Electronic Flowmeter, Model NT4400 User Guide Table of Contents Safety Alert Symbol... 2 Introduction... 2 Installation... 3 Mechanical Installation... 3 Mounting Orientation...
Type 2000 Transducer Product Instructions
Type 2000 Transducer Product Instructions The Type 2000 is an electro-pneumatic device that regulates an unregulated supply pressure down to an electronically-controlled output pressure. There are two
Fisher 3610J and 3620J Positioners and 3622 Electro Pneumatic Converter
Product ulletin D200064X02 360J and 3620J Positioners Fisher 360J and 3620J Positioners and 3622 Electro Pneumatic Converter Fisher 360J or 360JP pneumatic and 3620J or 3620JP electro pneumatic positioners
SM-1000 SERIES ROTARY ACTUATORS
SM-1000 SERIES ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1000 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating positioning control. Designed