SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
|
|
|
- Andrea Grant
- 5 years ago
- Views:
Transcription
1 Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm Specification : Generally conforming to IS : 2269, DIN 912, ISO : Threads : ISO Metric, 5g6g as per IS : Material : Special grade alloy steel 4. Mechanical Properties : Property class 12.9 as per IS : Note : Size in brackets are non-preferred standards shaded sizes are fully threaded 6. Finish : Blackened and coated with rust preventive oil. M10 8mm M12 10mm 1 M14 12mm M16 14mm
2 Dia. M16 14mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M18 14mm M20 17mm M22 17mm M24 19mm Specification : Generally conforming to IS : 2269, DIN 912, ISO : Threads : ISO Metric, 5g6g as per IS : Material : Special grade alloy steel 4. Mechanical Properties : Property class 12.9 as per IS : Note : Size in brackets are non-preferred standards shaded sizes are fully threaded 6. Finish : Blackened and coated with rust preventive oil. M27 19mm M30 22mm 2 M33 24mm M36 27mm
3 Dia. 3/16" 5/32" SOCKET HEAD CAP SCREWS INCH SERIES BSW (3/16" 1") 1/4" 3/16" 5/16" 7/32" 3/8" 5/16" 3/8" /2" /8" /4" /8" " /4" /2" /4" " /4" /2" /4" " /4" /2" " /2" " /2" " /2" " /2" " " " Specification : Generally conforming to bs : Threads : BS whitworth, Medium as per BS : Material : Special grade alloy steel 4. Mechanical Properties : As per BS Note : Shaded sizes are fully threaded. 6. Finish : Blackened and coated with rust preventive oil. 7/16" 5/16" 1/2" 3/8" 5/8" 1/2" 3/4" 9/16" 3 7/8" 9/16" 1" 5/8"
4 SOCKET SET SCREWS METRIC SERIES M3-M20 KNURLED CUP POINT 4 Diameter M3 M4 M5 M6 M8 M10 M12 M16 M20 L 1.5MM 2MM 2.5MM 3MM 4MM 5MM 6MM 8MM 10MM A. Key 1. Specification : Generally conforming to IS: 6094, ISO: Threads : ISO Metric, 5g6g as per IS: Material : Special grade alloy steel 4. Mechanical Properties : Property class 45H as per IS: Note : Prices for special points shown below will be 25% extra FLAT CONE DOG PLAIN CUP IS DIN Finish : Blackened and coated with rust preventive oil.
5 SOCKET SET SCREWS INCH SERIES BSW KNURLED CUP POINT 5 DIAMETER 3 / 16" 1 / 4" 5 / 16" 3 / 8" 1 / 2" LENGTH 3 / 32" 1 / 8" 5 / 32" 3 / 16" 1 / 4" 3 / / / / / / / / Qty. Per Box Specification : Generally conforming to BS: Threads : BS Whitworth. Medijm as per BS : Material : Special grade alloy steel 4. Mechanical Properties : As per BS : Note : Prices for special points shown below, generally conforming to BS : 2470 will be 25% extra FLAT CONE DOG PLAIN CUP 6. Finish : Blackened and coated with rust preventive oil.
6 6 SOCKET COUNTERSUNK HEAD SCREWS METRIC SERIES M3-M16 Dia. M3 M4 M5 M6 M8 M10 M12 M16 M20 2mm 2.5mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm Qty. Per Box 1. Specification : Generally conforming to IS: 6761, DIN Mechanical Properties : Property class 12.9 as per IS: Threads : ISO metric, 5g6g as per IS: Note : Shaded sizes are fully threaded 3. Material : Special grade alloy steel 6. Finish : Blackened and coated with rust preventive oil. Dia. SOCKET (BUTTON) HEAD SCREWS METRIC SERIES M3-M10 M3 2mm M4 2.5mm Specification : Generally conforming to ISO : Mechanical Properties : Property class 12.9 as per IS: Threads : ISO metric, 5g6g as per IS: Note : Shaded sizes are fully threaded 3. Material : Special grade alloy steel 6. Finish : Blackened and coated with rust preventive oil. M5 3mm M6 4mm M8 5mm M10 6mm
7 LENGTH SOCKET COUNTERSUNK HEAD CAP SCREWS INCH SERIES BSW DIAMETER 1/4" 5 / 32" 5/16" 3/16" 3/8" 7/32" 1/2" 5/16" 1. Specification : As per SFL Specification (Please refer to SFL Technical data sheet) 2. Threads : BS Whitworth. Medium as per BS Material : Special grade alloy steel 4. Mechanical Properties : Hardness HRc 5. Note : Shaded sizes are fully threaded. 6. Finish : Blackened and caoted with rust preventive oil. 7 5/8" 1/2" 3/8" /2" /4" /8" " /4" /2" " /2" " Qty. Per Box
8 INCH MOULDED T" HANDLE HEXAGON SOCKET INCH SERIES 1/16" TO 5/16" & METRIC SERIES 1.5mm TO 8mm Price Per 100 Pieces Qty. Per Box MM Price Per 100 Pieces MOULDED T" HANDLE HEXAGON SOCKET (EXTRA LONG) INCH SERIES 1/16" TO 1/4" & METRIC SERIES 1.5mm TO 8mm Qty. Per Box 1/16" /64" /32" /8" /32" /16" /32" /4" /16" 7400 INCH Price Per 100 Pieces Qty. Per Box 1/16" /64" /32" /8" /32" /16" /32" /4" Specification : a) Inch size : Generally conforming to BS: 2470 b) Metric sizes : Generally conforming to IS: 3082 DIN : 911, BS : Mechanical Properties : Hardness -HRc 50 min. 3. Note : Size stamped on plastic "T" handle for easy Identification. DIMENSIONS ACROSS FLATS Price Per 100 Pieces Qty. Per Box 1.5mm mm mm mm mm mm mm mm
9 Dimensions Across Flats HEXAGON SOCKET S INCH SERIES 1/16" TO 5/8 & METRIC SERIES 1.5mm to 36mm Price Per 100 Pieces Qty. Per Box Dimensions Across Flats Price Per 100 Pieces 1/16" mm /64" mm /32" mm /8" mm /64" mm /32" mm /16" mm /32" mm /4" mm /16" mm /8" mm /2" mm /16" mm /8" mm mm mm mm mm mm mm Qty. Per Box DELUXE AND STANDARD SETS PRICES IN RUPEES PER SET INCLUSIVE OF EXCISE DUTY AND OCTROI (EFFECTIVE 1ST JULY 2013) Size Across Flats Standard Price/Set Metric 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Inch. 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" Specification : a) Inch size : BS:2470 b) Metric series : IS:3082, DIN Material : Special Grade Alloy Steel 3. Mechanical Properties : Hardness - HRc 47 min. 4. Finish : Blackended and coated with rust preventive oil.
10 Dia. SOCKET HEAD CAP SCREWS INCH SERIES BSF/UNC/UNF (3/16"-1") 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 3/8" /2" /8" /4" /8" " /4" /2" /4" " /4" /2" /4" " /4" /2" " /2" " /2" " /2" 7" 7.1/2" 8" 9" 10" 1. Specification : Generally conforming to BS: Threads : BS whitworth medium BS (BSF), United National Coares : BS (UNC), Unified National Fine : BS (UNF) 3. Material : Special grade allow steel 4. Mechanical Properties : As per BS : Note : Shaded sizes are fully threaded 6. Finish : Blackened and coated with rust preventive oil. 10
11 TVS HEX HEAD BOLTS & NUTS 11 Dia. 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1/2" /8" /4" /8" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /2" " /2" " /2" " /2" " NUTS UNF/NC BSF/BSW NYLOC BSF / BSW 1. Specification : BS Threads : BS Supply Condition : As per BS Shaded Size are fully threaded. UNF / UNC ANSI B-18, 2.1/1965 B 1. 1/1960 As per B
12 TVS HEX HEAD BOLTS & NUTS 12 Dia. 8mm 4mm 5mm 460 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 10mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm NUTS GR NYLOC FINE PT 12x x x Specification : IS Thread Fit : IS Supply Condition : IS Shaded size are fully threaded.
13 TVS HEX HEAD BOLTS & NUTS 13 Dia. 16mm 20mm 22mm 24mm 27mm 30mm 33mm 36mm 42mm 45mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm NUTS Specification : IS Thread Fit : IS Supply Condition : IS Shaded size are fully threaded.
PRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
CUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
PRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Product Tensile Strength Property Class Diameter Size Range Length Evaluant Standard Psi Min N/mm Metric Inch* Metric Inch* IS ISO DIN BS ANSI JIS Hex Head Bolts/Screw 800/830 (8.8),0
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
COARSE SIZE. Suitable for all high tensile applications. PITCH (mm)
QUICK PRDUCT SELECTIN GUIDE THREAD SIZE CMPARISIN PRDUCT SCKET HEAD CAP SCKET CUNTER SUNK HEAD SCKET BUTN HEAD CAP SCKET SET (KNURLED CUP PINT) SCKET HEAD SHULDER HARDNESS Hrc 39-44 Hrc 39-44 Hrc 39-44
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Metrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
STAINLESS STEEL PARTS - GENERAL STOCK LIST
STAINLESS STEEL PARTS - GENERAL STOCK LIST MOLNAR PRECISION LTD. PO BOX 1208, PRESTON, LANCASHIRE, PR2 0HG, ENGLAND PHONE 01772 700700 FAX 01772 705075 Web Site: www.manx.co.uk Email: sales@manx.co.uk
BASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
TESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
Six-point sockets. 1/4" Square Drive Sockets /8" Square Drive Sockets /2" Square Drive Sockets /4" Square Drive Sockets 18-21
1 Six-point sockets 1/4" Square Drive Sockets 08-09 3/8" Square Drive Sockets 10-11 1/2" Square Drive Sockets 12-17 3/4" Square Drive Sockets 18-21 1" Square Drive Sockets 22-26 1-1/2" Square Drive Sockets
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
PAGETWO ten line telephone: Amend 1-1 January 1997
Conditions of Sale Amend 1-1 January 1997 1. Introduction These Conditions shall apply to all sales of goods by the Company to exclusion of all other terms, conditions and warranties. The Company shall
GRINDING WHEEL COMPONENTS PRODUCT GUIDE
CELEBRATING 5 YEARS GRINDING WHEEL COMPONENTS PRODUCT GUIDE DONAHUE INDUSTRIES A full service international metal components manufacturer 5 Industrial Drive, Shrewsbury, MA 155 USA sales@donahueindustries.com
Результат запроса: Din 914 pdf
Результат запроса: Din 914 pdf Din 914 are screws with lengths precise and sharp, thanks to the hexagonal socket - Din 914 socket set screws Arser. Home > Technical Information > DIN/ISO Specifications
Standard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
Camcar Socket Screw Catalog
Camcar Socket Screw Catalog Effective April 1, 2017 Camcar Socket Screws Suior Socket Screw Products STANLEY Engineered Fastening is committed to offering a broad range of socket screw standard products
Parts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
High-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading
1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,
FASTENERS BOLTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD THREADED RODS AND PINS, RIVETS AND OTHERS ANCHORS
FASTENERS BOTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD PINS, RIVETS AND THREADED RODS AND ANCHORS OTHERS C/ Nuva, 35 02002 Albact (Spain) tl:+(34) 967 221 602 fax:+(34)
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
Internal Measurement. Internal Measurement C-1
Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the
HAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
OMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
CD05/10 SERIES PTO PARTS LIST AND SERVICE MANUAL
CD05/0 SERIES PARTS LIST AND SERVICE MANUAL Heavy Duty, Constant Drive MUNCIE POWER PRODUCTS, INC. MUNCIE POWER PRODUCTS, INC. CD05/0 EXPLODED VIEWS Detail A Detail B Detail E Detail C Detail D 3 3 CD05/0
B436, B436E, B436SD WALK-BEHIND TROWEL
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-905-364-4200 Toll Free: 1-866-501-1683 Fax: 1-905-364-4201 B436, B436E, B436SD WALK-BEHIND TROWEL Doc. # Orig. Rel. 06/2016
Illston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
12 Point Flange Screws
Coarse Thread 1/4-20 Plain Finish 3/4" 1701038 1.44 100 1 1/2" 1701098 2.50 100 1/4-20 Zinc Phos. & Oil 1" 1701058 1.66 100 3/4 1701039 1.00 100 1 1/2" 1701098 2.50 100 1 3/4" 1701118 2.80 100 5/16-18
M.B.M MODEL ENGINEERING SUPPLIES IMPORTERS & SUPPLIERS OF MODEL ENGINEERING EQUIPMENT Visit Our Web Site :
M.B.M MODEL ENGINEERING SUPPLIES IMPORTERS & SUPPLIERS OF MODEL ENGINEERING EQUIPMENT Visit Our Web Site : www.mbmmodelengineering.com Bill Parker : Telephone (09) 235-2018 P.O. Box 75-153, Manurewa, Fax
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
CHAPTER 10 : STERLING STAR PLUS
CHAPTER 10 : STERLING STAR PLUS Sterling Star range is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, rake adjustable tiller, upholstered seat with
Belts: 8.1 Page 1. Draper belts & tracking (non windrow)
Belts: 8.1 Page 1. Draper belts & tracking (non windrow) Key Part No. Description Qty Remarks Page No. Revision 1 118-52101-06 Outer draper belt (21' CTF) N.B 2 118-52102-06 Outer draper belt (21' CTF)
CR76/EURO Handle Assembly Drawing Number:
CR7/EURO Handle Assembly Drawing Number: 09-07-0000 Date: //009 CR7/EURO Reference Parts List: 0-9-0000 B COMPONENTS CHANGE N/A CR7/EURO Handle Assembly Part Reference: 0-9-0000 Date: //009 CR7/EURO Reference
Parts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART Unverferth Manufacturing Co.,
CS8 RANDOM CRACK SAW FORM GOM , VERSION Replacement Parts Diagrams CS8 Series Crack Saw
FORM GOM590, VERSION. 5 Replacement Parts Diagrams FORM GOM590, VERSION. 5 Operator Handle Assembly CS/G Series Crack Saw FORM GOM590, VERSION. 55 Operator Handle Assembly CS/G Series Crack Saw Number
Rotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
Brakes & Running Gear
Brakes & Running Gear 2018 Brake Assemblies / Parts...1-8 Chrome Turndown... 9 1 517-278-8521 approducts.net AP 517.278.8521 Fax: 517.278.2457 www.approducts.net 200 Jay Street Coldwater, MI 49036 Nuts
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Great Plains. Parts Manual. Manufacturing, Inc. Simba ST-Bar.
Manual Simba ST-Bar Great Plains Manufacturing, Inc. www.greatplainsmfg.com Read the operators manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Safety & Shut-off Blocks
Safety & Shut-off Blocks Description HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
21" STEEL DECK EASY LINE EUROPEAN WALK MOWER
Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
WES B WEN WESN B WE S. Specialized Machine QUICK CHANGE TAP ADAPTER. Basic 4 Models. Quick Change. Quick Change. Safety Torque.
Basic 4 Models QUICK CHANGE TAP ADAPTER Quick Change S B N SN B S N Quick Change Safety Torque Quick Change Length Adjustment Quick Change S Safety Torque N Length Adjustment In addition to the basic 4
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
S3- W ASHER PRODUCTS
STAINLESSFASTENERS PRODUCTCATALOGUE 07 Flat Round Washers - JG Standard O.D Thickness M3 7.0 0.5 3624 M4 9.0 0.8 3625 M5 10.0 0.8 3627 M6 12.5 1.2 3628 4613 M8 17.0 1.2 3629 4615 M10 21.0 1.2 3630 4618
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
Model: 8020HD 1120HD Low Profile Vertical Mixers
TMR Incorporated Features: Heavy Duty MEGA FRAME Heaviest Frames in the industry Heavy Duty axles,10 bolt hubs 5 year guarantee on Planetaries 3/8 Thick High Strength Steel Tub Standard Stainless Steel
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING
Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors utomotive Pullers & PULLING & EXTRCTING 337 PULLING & EXTRCTING Toledo Pullers comprehensive range including Mechanical,
SERVICE MANUAL. Coolant Level - Sight Glass. Air Cleaner Restriction Indicator
Maintenance 170907 Coolant Level - Sight Glass Daily Check The coolant level gauge is sighted on the rear of the vehicle. The coolant level should be checked when the engine is cold or after 15 minutes
Heavy-Duty Series 2 Hydrostatic Piston Pumps. Model 5422 Model Model 3322 Model 3922 Model Parts and Service
Heavy-Duty Series 2 Hydrostatic Piston Pumps Parts and Service Model 3322 Model 3922 Model 4622 Model 5422 Model 6422 Table of Contents Introduction.....................................................................................................
standard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
ASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER. Parts Manual
ASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER Parts Manual This manual is intended solely for the use and information of Astro Machine Corp. its designated agents, customers, and their employees. The
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
Parts Manual. Trailed Track System (TTS) 70 Series ( , , ) 80 & 100 Series ( , , includes )
Parts Manual Trailed Track System (TTS) 70 Series (70-2516, 70-3011, 70-3611) 80 & 100 Series (100-3612, 100-3613, includes 80-3013) CPB-513 March 2014 TABLE OF CONTENTS FOREWORD...............................................................2
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
Replacement and Mounting Kits Frame Size 4-Series PVplus-UK
HYDRAULICS GROUP PRODUCT INFORMATION FORM Subject : Replacement and Mounting Kits Frame Size 4-Series PVplus-UK Owner Created By Date of Issue Document Issue Number Number Stefan Schindler/COR/PARKER
contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
VWU POKERS AND POWER UNITS OPERATORS MANUAL
VWU FLEXIBLE DRIVE POKERS British built Full range of couplings and Power take off s Cover springs as standard Full range of poker head sizes Six metres as standard Rubber cover noses available Petrol,
POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
WORKSHOP, SERVICE AND SAFETY WORKSHOP, SERVICE AND SAFETY
WORKSHOP, SERVICE AND SAFETY 1201 BEARINGS BEARINGS Large stock of roller bearings, ball bearings, angular contact ball bearings, tapered bearings, spherical roller bearings and thrust ball bearings. AETNA,
Technical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
Calle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
Slide Unit Spare Parts List LE VRL SB T02 Spare parts
Slide Unit Spare Parts List LE 60- VRL SB T02 Spare parts 10 248174 1 base plate LE 60-248178 4 cover complete LE 60 R 30 248179 2 piston LE 60 251753 2 push rod LE 60-50 251716 2 locking clamp LE 60 (see
Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
VTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -