S3- W ASHER PRODUCTS

Size: px
Start display at page:

Download "S3- W ASHER PRODUCTS"

Transcription

1

2 STAINLESSFASTENERS PRODUCTCATALOGUE 07 Flat Round Washers - JG Standard O.D Thickness M M M M M M M M M M M /A4 M M M M M M M Flat Round Washers - DIN 125A 316/A4 O.D Thickness M M M M M M M M M M M M M M M M M M M

3 Flat Round Washers - JG Standard IMPERIAL O.D Thickness 1/8 5/ /8 3/ /32 3/ /32 7/ /16 7/ /16 1/ /16 3/ /16 7/ / /16 1.1/ /4 1/ /4 9/ /4 5/ /4 3/ /4 7/ / /4 1.1/ /16 5/ /16 3/ / /16 1.1/ /8 3/ /8 7/ / /8 1.1/ /8 1.1/ /8 2 3mm /16 1.1/ / /2 1.1/ / /16 1.1/ /8 1.1/ /8 1.1/ /4 1.1/ /4 1.7/ /8 1.5/ /8 1.5/ / / / IMPERIAL 316/A / /8 2.1/ /4 2.3/ /2 3.1/ /4 4mm S3-WASHER PRODUCTS 43

4 STAINLESSFASTENERS PRODUCTCATALOGUE 07 Flat Round Washers - DIN 9021 (Mudguard Washers) 316/A4 O.D Thickness M M M M M M M Flat Round Washers - DIN 433 O.D Thickness M M NEW ZEALAND PRODUCT RANGE AUSTRALIA - POA SQUARE FLAT WASHER 316/A4 Width Thickness M10 50x M12 50x M16 50x M20 50x IMPERIAL FLAT WASHERS IMPERIAL GAUGE MIN. MAX. 10g 2.87mm 3.76mm 12g 2.37mm 3.05mm 14g 1.75mm 2.26mm 16g 1.34mm 1.75mm 18g 1.10mm 1.34mm 20g 0.84mm 1.20mm 22g 0.63mm 0.90mm 44

5 Spring Washers Single Coil - DIN 127B 316/A4 O.D Thickness Width M M M M M M M M M M M M M M M M M S3-WASHER PRODUCTS Spring Washers Single Coil - (Medium Section) - ANSI B /A4 O.D Thickness Width 2G G / /8-5G /8-6G /32-8G /16-10G / / / / / / / / / / / /

6 STAINLESSFASTENERS PRODUCTCATALOGUE 07 Belleville Washers Compressed to 0.75h Axial Load 0.75h mm d D S h S+h M4 18kg M5 28kg M6 60kg M8 93kg M10 140kg M12 268kg M16 356kg M20 597kg CUP Washers IMPERIAL 6G G G G G DIMENSIONS IN MM d d b h MAT. THICK. NO.6 (3mm) NO.8 (4mm) NO.10 (5mm) NO NO.14 (6mm) a = 90 46

7 Internal Tooth Lock Washers - DIN Type J O.D Thickness No. of Teeth M M M M M M M M M M S3-WASHER PRODUCTS External Tooth Lock Washers - DIN Type A O.D Thickness No. of Teeth M M M M M M M M Countersunk Tooth Lock Washers O.D Thickness No. of Teeth M M M M M

8 STAINLESSFASTENERS PRODUCTCATALOGUE 07 External Serrated Tooth Lock Washers - DIN 6798 Type A 316/A4 O.D Thickness No. of Teeth M M M M M M M Internal Serrated Tooth Lock Washers - DIN Type J O.D Thickness No. of Teeth M Crinkle, Curved and wave Washers TYPE CRINKLE (BS4463) CURVED (DIN 137A) WAVE (DIN 137B) M M M M M M M M

NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS

NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig

More information

GRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case

GRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case NO. 1 NORWAY FLAT COUNTERSUNK HEAD - 20 x 3/4 - -1/2-3/4-20 x 2-20 x 2- - 20 x 2-1/2-20 x 2-3/4-20 x 3-18 x 3/4-18 x 1-18 x 1-3/4-18 x 2-18 x 2- - 18 x 2-1/2-18 x 2-3/4-18 x 3-16 x 1-16 x 1- - 16 x 1-1/2-16

More information

SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI

SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790

More information

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication

More information

Technical Manual. Register 12 CONTENTS - AKH2.2

Technical Manual. Register 12 CONTENTS - AKH2.2 Page: 1 Contents Register 12 CONTENTS - AKH2.2 Page Technical Data AKH2.2-DIN... 2 Technical Data AKH2.2-ANSI... 3 Material Specification AKH2.2... 4 Dimensions AKH2.2-DIN... 5 Dimensions AKH2.2-ANSI...

More information

HYDRAULIC MOTORS EPMT

HYDRAULIC MOTORS EPMT HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS

More information

19" STEEL DECK REAR DISCHARGE EUROPEAN SELF-PROPELLED WALK BEHIND MOWERS

19 STEEL DECK REAR DISCHARGE EUROPEAN SELF-PROPELLED WALK BEHIND MOWERS Parts Manual for 19" STEEL DECK REAR DISCHARGE EUROPEAN SELF-PROPELLED WALK BEHIND MOWERS Model No. Description 881586 ERDV19675EX 881587 ERDV19850EHW Briggs & Stratton Yard Power Products Group 535 Macon

More information

Mönninghoff electromagnetic tooth clutches

Mönninghoff electromagnetic tooth clutches Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available

More information

Plain Ended Welding Fittings BS 4825 Part 2

Plain Ended Welding Fittings BS 4825 Part 2 Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric

More information

R190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly

R190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly 129-476R190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly 129-476R190 Lawn Boss 21 (1989) Page 2 of 8 Body Assembly 1 731-0609 1 Control Handle Ass'y. 3 710-0796 1 /P Truss Mach. B-Tap Scr. #12 x 1.5"

More information

AT5 Timing Belt Pulleys

AT5 Timing Belt Pulleys Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) NOTE: Dimensions in are in inches. QPMAT5A16010F06 QPMAT5A16011F06 QPMAT5A16012F06 QPMAT5A16013F06 QPMAT5A16014F06

More information

A type Ejectors (in line) Dimensions and weights

A type Ejectors (in line) Dimensions and weights A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created

More information

SHAPING SPRINGS FOR LIFE

SHAPING SPRINGS FOR LIFE HAPING PRING ORLIE RELIEVED "TRE TRENGTH GAINED" is synonymous to Impetus Movements, Repeatability, orce, upport in various areas of life. We at are haping prings since 5 Decades. provides solutions to

More information

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex

More information

CRANKSHAFT. Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket

CRANKSHAFT. Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket 30 02 CRANKSHAFT Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket 1. Crankshaft main bearing shells, upper 2. Upper thrust bearing 3. Crankshaft 4. Crankshaft main

More information

EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]

EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5.  Feed force [N] Feed speed [m/s] EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75

More information

Technical Data Sheet Unshielded (YY) PVC Control Cable

Technical Data Sheet Unshielded (YY) PVC Control Cable MachineTuff Cables Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include precision control sensors, multi axis control machines,

More information

3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799

3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799 Weld and Threaded Fittings 3000 lb Weld Fittings - ANSI B6./BS 3799 /8 /4 3 /8 / 3 /4 /4 / / 3 4 Centre to Bottom of 45 Tees, & Elbows Bore Diameter Bore Diameter of Fittings Thickness s - Average socket

More information

Technical Manual. Register 25 CONTENTS - AKH2-TAT

Technical Manual. Register 25 CONTENTS - AKH2-TAT D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data

More information

Spare parts list Pentruder Modular Drilling System

Spare parts list Pentruder Modular Drilling System Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M

More information

In addition to the SPEC products described in this catalog,

In addition to the SPEC products described in this catalog, In addition to the SPEC products described this catalog, Associated Sprg Raymond a worldwide leader the design, manufacture and sale of sprgs also offers a full le of struts, hardware, tool & die components:

More information

Cable fixings Information

Cable fixings Information Information Cable holders SH QS Multiple cable holder, metal Multiple cable holder approved for continous function E30 - E90, for wall and ceiling mounting. Please see the General Building Inspection Test

More information

Strain relief devices

Strain relief devices For optimum placement with dynamic use of cables Trademarks are legally protected for TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks

More information

Timing Belts

Timing Belts Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt

More information

Technical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing)

Technical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page: 1 Contents Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page Technical Data ARV2-TAT-DIN...2 Technical Data ARV2-TAT-ANSI...3 Material Specification ARV2-TAT...4 Dimensions ARV2-TAT-DIN...5

More information

BALL VALVE CATALOGUE //

BALL VALVE CATALOGUE // BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION_01-27.01.1 Fort Vale Engineering Ltd. 201 THIS PAGE IS INTENTIONALLY BLANK BALL VALVE CATALOGUE // CONTENTS // AIRLINE BALL

More information

Spiratec ST14, ST16 and ST17 Sensor Chambers and Sensors

Spiratec ST14, ST16 and ST17 Sensor Chambers and Sensors Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

MXL Timing Belt Pulleys

MXL Timing Belt Pulleys MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm

More information

Data sheet for MATRE BALANCED FOAM PROPORTIONERS

Data sheet for MATRE BALANCED FOAM PROPORTIONERS Data sheet for MATRE BALANCED FOAM PROPORTIONERS Datasheet for MATRE Balanced Foam Proportioners 1 Contents 2 General product information... 3 3 General product features:... 3 4 Flow range and interface

More information

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER GD 000 series Parts list for model: GD 005-0-0V: 08700 GD 00-0-0V: 08800 GDS 00-0-0V: 08900 HDS 005-0-0V: 08600 Made for ADVANCE /99 FORM NUMBER 56045 TABLE OF CONTENTS SERVICE KIT GD 005, GD 00, GDS 00

More information

Size and Configurations

Size and Configurations !!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent

More information

For applications with high axial play. For applications with reduced mounting space

For applications with high axial play. For applications with reduced mounting space Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000

More information

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model: , 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL

More information

Technical Data Sheet Unshielded (YY) PVC Control Cable

Technical Data Sheet Unshielded (YY) PVC Control Cable Technical Data Sheet Unshielded (YY) PVC Control Cable MachFlex 350 YY VDE Registered Flexible PVC Control Cables Applications Designed for applications which are installed in occasional flexing and fixed

More information

MATERIAL HANDLING SYSTEMS

MATERIAL HANDLING SYSTEMS MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030

More information

Spartan Mower Parts Manual RT

Spartan Mower Parts Manual RT Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension

More information

Tubing and Accessories

Tubing and Accessories Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3

More information

APIFLO-M series Series

APIFLO-M series Series APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25

More information

Spartan Mower Parts Manual RT

Spartan Mower Parts Manual RT Spartan Mower Parts Manual RT TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension Assembly..-0 Drive

More information

P.T.F.E. WEDGE SEALS. Vulcan P.T.F.E Wedge Type Seals

P.T.F.E. WEDGE SEALS. Vulcan P.T.F.E Wedge Type Seals P.T.F.E. WEDGE SEALS Vulcan P.T.F.E Wedge Type Seals P.T.F.E. WEDGE SEALS Introduction Vulcan s extensive 16XX range of Multi-Sprung Seals are commonly specified for arduous applications, such as corrosive

More information

M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40

M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

14 Piece 1/4" Dr. Standard

14 Piece 1/4 Dr. Standard 25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.

More information

Electromagnetically actuated clutches and brakes

Electromagnetically actuated clutches and brakes Electromagnetically actuated clutches and brakes General notes Dry-running/wet-running 4.03.00 Electrical circuits 4.03.00 Rectifier units 4.03.00 Coil connections 4.04.00 Spark quenching 4.04.00 Protection

More information

Spartan Mower Parts Manual SRT

Spartan Mower Parts Manual SRT Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension

More information

Products Catalogue. Quality Guaranteed

Products Catalogue. Quality Guaranteed Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range

More information

ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES

ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES Parts Manual for ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES MODEL ELT18538 (2690497) ELT2044 (2690498) LT18538 (2690440) LT18500 (2690518) LT2042 (2690441) LT2044 (2690442) LT22500 (2690443)

More information

Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page

Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic

More information

Assortment 2013_FPT BOOK.indb /02/13 6:57 PM

Assortment 2013_FPT BOOK.indb /02/13 6:57 PM Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self

More information

Ball Screw & Nut Part Number Description

Ball Screw & Nut Part Number Description Ball Screws & Nuts A Ball Screw is a threaded shaft that provides a spiral raceway for the ball bearings assembled in a nut. This combination provides a precision screw to enable controlled rotational

More information

Spartan Mower Parts Manual RT

Spartan Mower Parts Manual RT Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension

More information

FR6Q PTO PARTS LIST AND SERVICE MANUAL. Muncie Power Products, Inc.

FR6Q PTO PARTS LIST AND SERVICE MANUAL. Muncie Power Products, Inc. FR6Q PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. MODEL NUMBER CONSTRUCTION FR6Q - F1 09-6 N X Model: FR6Q Ford 6-Bolt Quiet Transmission Gear: F1 Ford 6R10 Internal Gear Ratio: 09 0.90:1

More information

Flow Sensors & Instruments

Flow Sensors & Instruments STAINESS STEE TURBINE FOWMETERS Serie X IG PRESSURE AND IG TEMPERATURE Principle of Operation The x range of Turbine Flowmeters meet the demand of most liquid measurement applications. They basically consist

More information

600/1000 V. 5. Flame Retardancy VDE , DIN EN , IEC

600/1000 V. 5. Flame Retardancy VDE , DIN EN , IEC MachineTuff Cables Low Voltage Control & Power Cable Galvanized Steel Wire Braid Armored (GSWB) > Excellent Mechanical Protection Applications Designed for applications which are installed in occasional

More information

M10F Ball Valve DN¼" to DN2½"

M10F Ball Valve DN¼ to DN2½ Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE //

FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE // FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE // FIRESAFE & LETHAL SERVICE BALL VALVES // CONTENTS // FIRESAFE & LETHAL SERVICE BALL VALVES //» 1" Firesafe / Lethal Service Ball Valve» 2" Firesafe / Lethal

More information

VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED

VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED NFPA SIZE D10 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may be reduced from that shown if a three-way circuit (half circuit) is used,

More information

9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95

9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95 93119 9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1,300.79 $866 95 93109 9 Drawer Top Chest - PRO+ Series 26 x 19 x 21 Capacity: 7,130 cu. in. List $745.25 $496 95 93211

More information

GROUPCODE NEN : ANSI : STEEL BS : STEEL

GROUPCODE NEN : ANSI : STEEL BS : STEEL RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6

More information

Custom welded sections can be sourced within New Zealand (Steltech) within 4 to 6 weeks of order.

Custom welded sections can be sourced within New Zealand (Steltech) within 4 to 6 weeks of order. MATERIALS Steel Availability in New Zealand Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 28 th November 2007 Ref.: MAT1003 Key Words steel availability, procurement Introduction

More information

ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES

ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES Parts Manual for ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES MODEL ELT18538 (2690497) ELT18538 (2690796) ELT18540 (2690781) ELT2044 (2690498) LT18538 (2690440) LT18500 (2690518) LT2042 (2690441)

More information

UNIVERSAL BRACKET SET FLEXIBLE MOUNTING KIT FOR VARIOUS PRODUCTS PART NUMBER: 79160

UNIVERSAL BRACKET SET FLEXIBLE MOUNTING KIT FOR VARIOUS PRODUCTS PART NUMBER: 79160 DO NOT ATTEMPT TO INSTALL OR USE A PRODUCT UNTIL YOU HAVE READ AND UNDERSTAND THE USER MANUAL AND SAFETY LABELS. UNIVERSAL BRACKET SET FLEXIBLE MOUNTING KIT FOR VARIOUS PRODUCTS PART NUMBER: 7960 PRODUCT

More information

HYDRAULIC MOTORS EPMS

HYDRAULIC MOTORS EPMS HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description

More information

Reusable Modular Instruments An AEM Monitor must be used in order to operate AEM monopolar laparoscopic instruments.

Reusable Modular Instruments An AEM Monitor must be used in order to operate AEM monopolar laparoscopic instruments. Reusable Modular Instruments HOW TO ORDER 1 2 3 + + 1 Ensure AEM Monitor and ESU Compatibility. An AEM Monitor must be used in order to operate AEM monopolar laparoscopic instruments. 2 Select a Reusable

More information

FT Series. Turbine Flowmeters. Description. Features. Applications. Operation. FT Series Turbine Flowmeters

FT Series. Turbine Flowmeters. Description. Features. Applications. Operation. FT Series Turbine Flowmeters FT Series Turbine Flowmeters Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because of their

More information

3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical

More information

Spartan Mower Parts Manual SRT

Spartan Mower Parts Manual SRT Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension

More information

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model: , 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL

More information

DRILLING & MOBILE EQUIPMENT

DRILLING & MOBILE EQUIPMENT DRILLING & MOBILE EQUIPMENT CHAINANDDRIVES.COM.AU Introduction INTRODUCTION Chain & Drives was established to become a leader in Power Transmission. One of our core sectors is the Drill Rig Industry. We

More information

Coupling Options for Every Application

Coupling Options for Every Application Coupling Options for Every Application Bellows Couplings High torsional rigidity, low inertia, zero backlash and misalignment compensation Can be used at temperatures up to 570 F without any limitations

More information

Chains 2013_FPT BOOK.indb 5 17/02/13 6:54 PM

Chains 2013_FPT BOOK.indb 5 17/02/13 6:54 PM s Contents Australia s Only Agricultural...08 Detachable chain... 08 Agri-Power-...09 Simplex roller chain... 09 Heavy duty series chain... 09 ANSI Standard...10 ANSI Heavy Duty...11 BS...12 Breaker and

More information

Technical Data Sheet Shielded (CY) PVC Control Cable

Technical Data Sheet Shielded (CY) PVC Control Cable MachineTuff Cables Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include

More information

AIRLINE EQUIPMENT CATALOGUE //

AIRLINE EQUIPMENT CATALOGUE // AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //

More information

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics

More information

For high temperature and chemical applications, Varec recommends the extended service option which features Teflon or Viton O-ring and gasket.

For high temperature and chemical applications, Varec recommends the extended service option which features Teflon or Viton O-ring and gasket. GAS CONTROL VAREC 7100B Series PRESSURE RELIEF VALVES The 7100B Series is designed to protect low pressure storage tanks and systems from being over pressured. Introduction The Varec 7100B Series is a

More information

Veljan Gear Pumps. E' Series Features:-

Veljan Gear Pumps. E' Series Features:- E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength

More information

HYDRAULIC MOTORS EPMS - series 3

HYDRAULIC MOTORS EPMS - series 3 HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification

More information

Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]

Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ] 'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength

More information

STUMP GRINDER FIRST GENERATION- COME TO USA DIFFERENCE BETWEEN 1FIRST AND SECONDE GENERATION IS THE ANGLE OF THE BODY.

STUMP GRINDER FIRST GENERATION- COME TO USA DIFFERENCE BETWEEN 1FIRST AND SECONDE GENERATION IS THE ANGLE OF THE BODY. STUMP GRINDER FIRST GENERATION- COME TO USA COLOR GREEN SOLD 1 YEAR DIFFERENCE BETWEEN 1FIRST AND SECONDE GENERATION IS THE ANGLE OF THE BODY. FRIST GENERAL THERE WAS A ANGLE BETWEEN THE ENGINE AND THE

More information

OMT Technical Information Shaft Version

OMT Technical Information Shaft Version A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute

More information

Faraday Flag Components of Axcelis GSD Implanters

Faraday Flag Components of Axcelis GSD Implanters Illustrated Parts Guide for Faraday Flag Components of Axcelis GSD Implanters Section 0 SHCS, Cap Screw, - X /", SST -000-0 SHCS, Cap Screw, - X ", SST 00 A O-Ring, -0, Buna-N No OEM Reference A Fitting,

More information

MKD04 COMPACT MOTORS

MKD04 COMPACT MOTORS MKD04 COMPACT MOTORS T E C H N I C A L C A T A L O G Compact motors MKD04 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.

More information

Modular Laparoscopic Instruments Flexible and safe

Modular Laparoscopic Instruments Flexible and safe Modular Laparoscopic Instruments Flexible and safe Laparoscopic instruments Precision in every detail: The optimal module for every field of application Handles Combination handle The newly developed combination

More information

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220 Large chamber type level gauge Model : L110, L210 Description Model Model - L110 Chamber material - Carbon steel, stainless steel MAX. pressure - 14MPa Vessel connection - 25A, 40A, 50A Model - L220 Chamber

More information

Rigid Tube and Couplings

Rigid Tube and Couplings Rigid Tube and Couplings CONTENT 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Rigid Tube 291 Metric Tube Couplings 295 Imperial Tube Couplings 309 Stainless Steel Tube Couplings 317 Brass Tube Couplings 323 Twin Ferrule

More information

ROSTA Tensioner Devices

ROSTA Tensioner Devices 33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as

More information

Why Dynamic Toolboxes?

Why Dynamic Toolboxes? Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty

More information

Oil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ. P1

Oil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ.  P1 Ashley Power Ltd. 580-586 Ashley Road Parkstone Poole Dorset, BH14 0AQ Oil Seal Catalogue Tel: +44 (0) 1202 746031 Fax: +44 (0) 1202 741108 Email: sales@ashleypower.co.uk P1 Oil Seals P2 Oil Seals Contents

More information

Electric power 50/60 Hz / 1200 W / 6100 rpm Electrical insulation according VDE KI.II 0740 Hose Cutting Machine EM 10.P

Electric power 50/60 Hz / 1200 W / 6100 rpm Electrical insulation according VDE KI.II 0740 Hose Cutting Machine EM 10.P EM 10.P EM 10.P 1 steel wire or textile braided hoses up to size -16 2 steel wire braided hoses up to size -12 Repair shops or mobile service vehicles, preferably in combination with KarryKrimp 1 Not suitable

More information

3.1 Stainless steel exhaust bellows

3.1 Stainless steel exhaust bellows 3.1 Stainless steel exhaust bellows There are two basic types of expansion bellows singles and doubles, and their purpose is to absorb the movement in any pipework run that is fixed between two fixed points.

More information

Simulator switch, magnetic operation

Simulator switch, magnetic operation Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip

More information

Hall sensors. Overview Page 28 Functional principle and installation Page 29 Cylindrical designs Page 31. Hall sensors.

Hall sensors. Overview Page 28 Functional principle and installation Page 29 Cylindrical designs Page 31. Hall sensors. Overview Page 28 Functional principle and installation Page 29 Cylindrical designs Page 31 27 Kurzübersicht Hallsensoren Overview product family MHRM 12 MHRM 12 IHRM 12 MHRM 18 MTRM 16 dimension 12 mm

More information

More Precision. mainsensor Magneto-inductive displacement sensor

More Precision. mainsensor Magneto-inductive displacement sensor More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative

More information

MaalonDrive. Space 8mm - Type 2. Technical Supply Specifications: MaalonDrive Space 8mm - Type 2. Attributes. Technical parameter.

MaalonDrive. Space 8mm - Type 2. Technical Supply Specifications: MaalonDrive Space 8mm - Type 2. Attributes. Technical parameter. MaalonDrive Space 8mm - Type 2 Attributes Highlights Description High repeatability Dry lubrication due to coatings Zero backlash with optimised fit between speed and resolution Worm gear integrated on

More information

Safety Coupling Overview

Safety Coupling Overview Safety Coupling Overview Safety couplings are used to minimize expensive damage when a collision occurs in a high performance servo drive system. When a collision occurs, the safety coupling will stop

More information

21" STEEL DECK EASY LINE EUROPEAN WALK MOWER

21 STEEL DECK EASY LINE EUROPEAN WALK MOWER Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,

More information

GEAR-COUPLINGS. Series LX GLX S-NX

GEAR-COUPLINGS. Series LX GLX S-NX GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing

More information

NIDEC-SHIMPO. Planetary Gearboxes - Flexwave

NIDEC-SHIMPO. Planetary Gearboxes - Flexwave Near Zero backlash High efficiency ratings High reduction ratios in a compact footprint Exceptional repeatability and torsional stiffness Extremely light weight with superior torque density These characteristics

More information