Great Plains. Parts Manual. Manufacturing, Inc. Simba ST-Bar.

Transcription

1 Manual Simba ST-Bar Great Plains Manufacturing, Inc. Read the operators manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Illustrations may show optional equipment not supplied with standard unit. Copyright 2013 Printed EN

2

3 Contents Mainframe Assembly (2.5, 3.0m, 3.5m, 4.0m)...6 Mainframe Assembly (4.0m HD)...8 Tine Mount - Shear Bolt...10 Tine Mount - Spring Reset...12 Tine Adapters...14 Tine Assemblies...16 Hydraulic Kit (4.0m HD Only)...18 Light Kit...20 Standard Torques & Pressures...22 Contents (Alphabetical Order) Hydraulic Kit (4.0m HD Only)...18 Light Kit...20 Mainframe Assembly (2.5, 3.0m, 3.5m, 4.0m)...6 Mainframe Assembly (4.0m HD)...8 Standard Torques & Pressures...22 Tine Adapters...14 Tine Assemblies...16 Tine Mount - Shear Bolt...10 Tine Mount - Spring Reset Simba ST-Bar

4 Using This Manual This manual is divided into sections. The first section contains General Information, a Table of Contents and an Alphabetical Page Index. The remaining sections divide the machine into segments (i.e. Frames, Hydraulics, etc.) which illustrate and list all parts. The Great Plains parts in this manual are specially designed for this machine and should be replaced with Great Plains parts only. The information in this manual is current at printing. Some parts may change to assure top performance. Right-hand and left-hand as used in this manual are determined by facing the direction the machine will travel while in use. Manual Replacement Replacement manuals are available. Refer to your dealer for additional information. Manual Revisions When this manual is revised, the modification date is printed on the front cover and on the revised page(s). Touch-up Paint Repaint parts where paint is worn or scratched to prevent rust. Aerosol touchup paint is available. To order use Great Plains parts numbers below: GP Green C GP Black C Below is an example of two facing pages from a parts manual. Familiarize yourself with the contents of these pages. Illustration Title Parts Tine Mount - Shear Bolt Parts Tine Mount - Shear Bolt Item Part No. Part Description Comments D HHCS M12X1.75X85 GR10.9 SPTHD A SHEAR BOLT UNIT C/W C/PLATE COMPLETE UNIT AS SHOWN H TINE SHEAR CLAMP D PLATE 25MM C NUT HEX NYLOCK M12X1.75 PLT C NUT HEX M16X2.00 NYLON INSERT C NUT HEX NYLOCK M20X C WASHER FLAT M20 PLT C WASHER FLAT M16 PLT C BUSH SPRUNG -Ø16.5XØ13.5X26.15 Illustration C HHCS M20X2.5X160 GR C HHCS M20X2.5X180 GR C HHCS M16X2X90 GR8.8 SPTHD Parts List Illustration Number Machine Simba ST-Bar Simba ST-Bar Manual Part Number Page number Modification Date Simba ST-Bar 4

5 Hardware Legend ADJ Adjuster HWHMS Hex Washer Head Machine Screw AR As Required HXBHCS Hex Socket Button Head Cap Screw BSP British Standard Pipe J Hex Jam Nut C Cap Screw JIC 37 Degree Tapered Thread CP Cotter Pin L Helical Spring Lock Washer CPHSSS Cup Point Hex Socket Set Screw LH Left Hand CPSHSS Cup Point Square Head Set Screw LUG Lug Bolt CPSQHSS Cup Point Square Head Set Screw NFC National Fine Cap Screw CRFCHMS Cross Recess Flat Countersunk Head Mach. Screw NPSM National Pipe Straight Mechanical CRPHMS Cross Recess Pan Head Machine Screw NPTF National Pipe Taper Fuel CRPHTFS Cross Recess Pan Head Thread Forming P Wide Plain Washer CRRHMS Cross Recess Round Head Machine Screw PHMS Pan Head Machine Screw CRTHMS Cross Recess Truss Head Machine Screw PLOW Plow Bolt CSNB Countersunk Square Neck Bolt QRC Quick Release Coupling FHMS Flat Head Machine Screw RH Right Hand FTC Full Thread Cap Screw RHMS Round Head Machine Screw H Hex Nut RHSNB Round Head Square Neck Bolt HCLN Hex Center Lock Nut SFCHMS Slotted Flat Countersunk Head Machine Screw HFLCS Hex Flange Lock Cap Screw SFHMS Slotted Fillister Head Machine Screw HFS Hex Flange Screw SP Special HFSLN Hex Flange Serrated Lock Nut SP SCREW Special Screw HFSS Hex Flange Serrated Screw SQHSS Square Head Set Screw HHCS Hex Head Cap Screw or Metric Bolt SRHMS Slotted Round Head Machine Screw HSBHCS Hex Socket Button Head Cap Screw SSS Socket Set Screw HSFCHCS Hex Socket Flat Countersunk Head Cap Screw STCS Self Tapping Cap Screw HSHCS Hex Socket Head Cap Screw STHMS Slotted Truss Head Machine Screw HSSS Hex Socket Head Screw WHEEL Wheel Studs and Hub Long Bolts HTLN Hex Top Lock Nut WING Wing Bolt HWHCS Hex Washer Head Cap Screw Replacement Hardware The Hardware Legend above lists hardware abbreviations used in the parts lists. The use of improper grades of hardware can result in personal injury, damage to equipment, or loss of property. 5 Simba ST-Bar

6 Mainframe Assembly (2.5, 3.0m, 3.5m, 4.0m) Simba ST-Bar 6

7 Mainframe Assembly (2.5, 3.0m, 3.5m, 4.0m) Item Part No. Part Description Comments D PIN Ø25X140MM H PIN UPPER LINK CAT H ST BAR 3.0M CHASSIS H ST BAR 3.5M CHASSIS H PARKING STAND LEG H PARKING STAND BASE H UPPER LINK PIN - CAT H PIN - Ø36X H PARKING STAND LEG H PARKING STAND LEG H ST BAR 2.5M CHASSIS D PLATE 15MM H ST BAR 4.0M CHASSIS - CAT D PIN Ø16X D CAT3 LOWER LINK PIN ST BAR D LOWER BALL SPACER CAT D PLATE 8MM C NUT HEX M16X2.00 NYLON INSERT C WASHER FLAT M6 PLT C WASHER FLAT M16 PLT C LYNCH PIN CAT C R CLIP Ø6X C MANUAL HOLDER C BALL CAT 3 LOWER Ø C HHCS M6X1X20 GR C HHCS M16X2X150 GR C TOPLINK CAT C POINT TOOL-CAST 7 Simba ST-Bar

8 Mainframe Assembly (4.0m HD) Simba ST-Bar 8

9 Mainframe Assembly (4.0m HD) Item Part No. Part Description Comments H HD ST BAR 4.0M CHASSIS H PARKING STAND LEG H PIN - Ø36 X H PIN UPPER LINK CAT D PIN Ø16X D CAT3 LOWER LINK PIN ST BAR D LOWER BALL SPACER CAT D BUSH Ø70 X Ø40 X D PLATE 8MM D HOSE STOWAGE PLATE C HHCS M10X1.5X20 GR C WASHER SPRING LOCK M10 PLT C WASHER FLAT M6 PLT C LYNCH PIN CAT C R CLIP Ø6X C LYNCH PIN CAT 2 LOCKING C MANUAL HOLDER C BALL CAT 3 LOWER Ø C HHCS M6X1X20 GR C TOPLINK CAT C POINT TOOL-CAST 9 Simba ST-Bar

10 Tine Mount - Shear Bolt Simba ST-Bar 10

11 Tine Mount - Shear Bolt Item Part No. Part Description Comments D HHCS M12X1.75X85 GR10.9 SPTHD A SHEAR BOLT UNIT C/W C/PLATE COMPLETE UNIT AS SHOWN H TINE SHEAR CLAMP D PLATE 25MM C NUT HEX NYLOCK M12X1.75 PLT C NUT HEX M16X2.00 NYLON INSERT C NUT HEX NYLOCK M20X C WASHER FLAT M20 PLT C WASHER FLAT M16 PLT C BUSH SPRUNG -Ø16.5XØ13.5X C HHCS M20X2.5X160 GR C HHCS M20X2.5X180 GR C HHCS M16X2X90 GR8.8 SPTHD 11 Simba ST-Bar

12 Tine Mount - Spring Reset Simba ST-Bar 12

13 Tine Mount - Spring Reset Item Part No. Part Description Comments V SPRING PIVOT ASSEMBLY V SPRING TOP PLATE ASSEMBLY D BUSH Ø34XØ30X D MAIN PIVOT K TINE COMPLETE-KRAVA NO FRONT PLATE / FASTENERS D PLATE 25MM C ROLL PIN Ø6X50MM C ROLL PIN Ø10X50MM C NUT HEX NYLOCK M20X C NUT LOCK M16 PHILIDAS C WASHER FLAT M20 PLT C WASHER FLAT M16 PLT C WASHER D75XD25X C PIVOT PIN Ø30X105MM C SPRING Ø103MM C SPRING Ø60MM C MOUNTING PLATE C TINE ARM LH C TINE ARM RH C CASTING C CASTING TOP PLATE C TINE BODY C BUSH SPRUNG - Ø38XØ30X C BUSH SPRUNG - Ø44XØ36X C BEARING TUBE C SPRING TUBE C HHCS M16X2X75 GR10.9 SPTHD C HHCS M20X2.5X160 GR C HHCS M20X2.5X80 GR C HHCS M24X3X360 GR8.8 SPTHD 13 Simba ST-Bar

14 Tine Adapters Simba ST Bar 14

15 Tine Adapters Item Part No. Part Description Comments H CONVERTER K ST TINE ADAPTER ASSEMBLY (OBSOLETE) K TINE ADAPTER SUPPORTED D PIN Ø16X C CIRCLE COTTER 52X C HHCS M16X2.0X90 GR C NUT HEX M16X2.00 NYLON INSERT C WASHER FLAT M16 PLT H TINE ADAPTER 15 Simba ST-Bar

16 Tine Assemblies Simba ST-Bar 16

17 Tine Assemblies Item Part No. Part Description Comments V WEDGE COMPLETE D EP POINT D WING LD D DUST SEAL H TINE - ST TYPE H TINE - LD TYPE C HHCS M12X1.75X70 GR C NUT HEX NYLOCK M10X1.5 PLT C NUT LOCK 1/2 UNC C NUT HEX WHIZ M12X C WASHER FLAT M10 PLT C LOCK PIN C CASTING C BOLT ON CAST POINT C SPRING BALL C HHCS M10X1.5X45 GR C PLOW 1/2-13X3 GR C PLOW M12X1.75X40 GR C POINT TOOL-CAST 17 Simba ST-Bar

18 Hydraulic Kit (4.0m HD Only) Simba ST-Bar 18

19 Hydraulic Kit (4.0m HD Only) Item Part No. Part Description Comments C QUICK RELEASE - 1/2MBSP C AD 3/8MBSP 1/2FBSP C WASHER 1/2BSPP BONDED C QUICK RELEASE - 1/2FBSP C AD 1/2MBSPP BLKHD W/LN C AD 1/2MBSPP 3/8MBSPP C HH3/ C CAP FOR MALE - YELLOW C CAP FEMALE - YELLOW C CAP FOR MALE - RED C CAP FEMALE - RED C CAP FOR MALE - GREEN C CAP FEMALE - GREEN 19 Simba ST-Bar

20 Light Kit Simba ST-Bar 20

21 Light Kit Item Part No. Part Description Comments V FRONT LIGHT KIT COMPLETE KIT (ITEMS 2-13) D PLATE 8MM D PLATE 6MM C HHCS M10X1.5X20 GR C NUT HEX NYLOCK M8X1.25 PLT C NUT HEX M8X2.00 NYLON INSERT C WASHER SPRING LOCK M10 PLT C WASHER FLAT M8 PLT C WASHER FLAT M10 PLT C LIGHT BOARD FRH C LIGHT BOARD FLH C HHCS M8X1.25X25 GR8.8 FTHD C HSFCHCS M8X30 CSK 21 Simba ST-Bar

22 Standard Torques & Pressures BOLT TORQUES WHEEL NUT TORQUES Torque Torque Bolt size Grade Kg.M lb.ft Nm Wheel Nuts Kg.M lb.ft Nm M /8" BSF M M M TYRE PRESSURES 12.9 M Pressure Tyre size Ply rating Psi Bar x M / / / M / / / M / / / M x / M / M M /4" UNF 1" UNF 1 3/4" BSW 5/8" UNC Simba ST-Bar 22

23

24 Great Plains UK Ltd. Woodbridge Road, Sleaford Lincolnshire, NG34 7EW United Kingdom Tel.: +44(0) Fax: +44(0) Web: